Green synthesis of poly(pyrrole methane) for enhanced adsorption of anionic and cationic dyes from aqueous solution

Revealing the interaction forms between Hg(II) and group types (-Cl, -CN, -NH2, -OH, -COOH) in functionalized Poly(pyrrole methane)s for efficient mercury removal

To explore the impact of different functional groups on Hg(II) adsorption, a range of poly(pyrrole methane)s functionalized by -Cl, -CN, -NH2, -OH and -COOH were synthesized and applied to reveal the interaction between different functional groups and mercury ions in water, and the adsorption mechanism was revealed through combined FT-IR, XPS, and DFT calculations. The adsorption performance can be improved to varying degrees by the incorporation of functional groups. Among them, the oxygen-containing functional groups (-OH and -COOH) exhibit stronger affinity for Hg(II) and can increase the adsorption capacity from 180 mg g-1 to more than 1400 mg g-1 at 318 K, with distribution coefficient (Kd) exceeding 105 mL g-1. The variations in the capture and immobilization capabilities of functionalized poly(pyrrole methane)s predominantly stem from the unique interactions between their functional groups and mercury ions. In particular, oxygen-containing -OH and -COOH effectively capture Hg(OH)2 through hydrogen bonding, and further deprotonate to form the -O-Hg-OH and -COO-Hg-OH complexes which are more stable than those obtained from other functionalized groups. Finally, the ecological safety has been fully demonstrated through bactericidal and bacteriostatic experiments to prove the functionalized poly(pyrrole methane)s can be as an environmentally friendly adsorbent for purifying contaminated water.

Effectively adsorb Au(S2O3)23- using aminoguanidine as trapping group from thiosulfate solutions

Thiosulfate gold leaching is one of the most promising green cyanide-free gold extraction processes; however, the difficulty of recovering Au(I) from the leaching system hinders its further development. This study prepared aminoguanidine-functionalized microspheres (AGMs) via a one-step reaction involving nucleophilic substitution between aminoguanidine hydrochloride and chloromethylated polystyrene microspheres and used AGMs to adsorb Au(I) from thiosulfate solutions. Scanning electron microscopy, Brunauer-Emmett-Teller analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to analyze the structure and properties of AGMs. Experiments were designed to investigate the effects of pH, temperature, initial Au(I), and thiosulfate concentrations on the gold adsorption performance of AGMs. Results demonstrated that AGMs can efficiently adsorb Au(I) from thiosulfate solutions in a wide pH range. The adsorption process conforms to the pseudo-second-order kinetic model and Langmuir isotherm model, with a maximum capacity of 22.03 kg/t. Acidic thiourea is an effective desorbent, and after four adsorption-desorption cycles, the adsorption rate of Au(I) by AGMs is 78.63%, which shows AGMs have good cyclic application potential. Based on the results of characterization, experiments, and density functional theory calculations, the mechanism for the adsorption of [Au(S2O3)2]3- on AGMs involves anion exchange. Importantly, AGMs exhibited satisfactory adsorption property for Au(I) in practical Cu2+-NH3(en)-S2O32- systems. This study provided experimental reference for the recovery of Au(I) from thiosulfate solution.

Selective recovery of Re(VII) by nucleobases functionalized cellulose microspheres from the simulated uranium ore leaching solution

From a practical standpoint, it is still challenging to develop adsorbents with high adsorption capacity and outstanding selectivity for rhenium in uranium ore leaching solution. In this study, in order to explore the structure-property relationship, four nucleobases (Adenine, Guanine, Hypoxanthine and Xanthine) were used as functionalization reagents to modify cellulose (MCC-g-GMA-A, MCC-g-GMA-G, MCC-g-GMA-H and MCC-g-GMA-X) via radiation method. The effect of the type of nucleobases on the adsorption performance was evaluated by batch and dynamic experiments. The order of maximum adsorption capacity was MCC-g-GMA-A (194.0 mg g-1) > MCC-g-GMA-G (123.4 mg g-1) > MCC-g-GMA-H (45.59 mg g-1) > MCC-g-GMA-X (23.43 mg g-1), which was associated with the category of nitrogen-functional groups. Different nitrogen-containing functional groups have different degrees of protonation, which leads to differences in the interaction of the adsorbent with Re(VII). Notably, the adsorbents were able to selectively capture trace Re(VII) from the simulated uranium ore leaching solution. The FT-IR, XPS analyses, DFT theoretical calculations exhibited that the adsorption mechanism of nucleobases functionalized cellulose microspheres and Re(VII) was electrostatic interaction. MCC-g-GMA-A and MCC-g-GMA-G exhibited excellent selectivity towards Re(VII), which are potential adsorbents for Re(VII) recovery in uranium ore leaching solutions.

Nickel ferrite nanoparticles doped on hollow carbon microspheres as a novel reusable catalyst for synthesis of N-substituted pyrrole derivatives

Pyrroles are widely spread worldwide because of their critical applications, especially pharmacology. An expedition method for one-pot synthesis of N-substituted pyrrole derivatives has been presented by a reaction between 2,5-dimethoxytetrahydrofuran and various primary aromatic amines in the presence of NiFe₂O₄ anchored to modified carbon hollow microspheres (NiFe₂O₄@MCHMs) as a recoverable reactive catalyst. The Classon-Kass method has been used to synthesize the pyrroles in excellent yields and short reaction times in the same direction with green chemistry rules. This reaction was carried out by employing NiFe₂O₄@MCHMs as a catalyst to make a simple procedure with short activation energy in water as an accessible, non-toxic, and biodegradable solvent. This catalyst provides a promising pathway to synthesize N-substituted pyrroles several times in a row through the recyclability without remarkable loss of its catalytic activity. The NiFe₂O₄@MCHMs nanocatalyst was characterized by applying FT-IR, XRD, FE-SEM, TEM, EDS, BET, TGA, VSM, and elemental mapping techniques. Also, the synthesized N-substituted pyrrole derivatives were identified using melting point, FT-IR, and ¹H NMR analyses.

Preparation of polyamidoamine dendrimer-functionalized chitosan beads for the removal of Ag(I), Cu(II), and Pb(II)

Chitosan bead grafted by third-generation dendrimers (CB-G3) with a diameter of 1.40 mm was synthesized to investigate their performance in recovering Ag(I), Cu(II), and Pb(II) ions in aqueous media. The prepared adsorbents were characterized by XRD, FT-IR, elemental analysis, TGA, and SEM, and the effects of pH, contact time, concentration, and temperature were examined. The results showed that the adsorbents were successfully fabricated. The optimum pH value was 5, and the increased generation number contributed to adsorption capacity improvement, indicating that electrostatic interactions between amine groups and metal ions are the governing mechanism of adsorption by the CB-G3. The kinetics, isotherms, and thermodynamics of Ag(I), Cu(II), and Pb(II) adsorption onto the CB-G3 were investigated. The adsorption processes can be described using pseudo-second-order kinetic and Langmuir models. The maximum monolayer adsorption capacities were 105.62, 88.82, and 97.87 mg·g^-1 for Ag(I), Cu(II), and Pb(II) at 30 °C within 210 min, respectively. Electrostatic interactions and hydrogen bonds are the main mechanisms between metal ions and N atoms. Therefore, the CB-G3 is a promising candidate for Ag(I), Cu(II), and Pb(II) adsorption owing to its splendid ability in easy separation, good adsorptivity, and reusability for efficiently adsorbing Ag(I), Cu(II), and Pb(II) ions.

Selective mercury adsorption and enrichment enabled by phenylic carboxyl functionalized poly(pyrrole methane)s chelating polymers

Mercury decontamination from water requires highly effective and efficient methods for maintaining public health and environmental protection. Herein, based on the coordination theory between functional groups and metal ions, we proposed phenylic carboxyl group-based poly(pyrrole methane)s (PPDCBAs) as highly efficient mercury removal materials for environmental remediation applications. It was found that PPDCBAs can efficiently adsorb and remove mercury(II) from aqueous solutions by functionalizing the molecular structure with phenylic carboxyl groups. Among the as-prepared PPDCBAs, poly[pyrrole-2, 5-diyl (4-carboxybenzylidane)] (PPD4CBA) with the carboxyl group at the para position can not only adsorb mercury over 1400 mg⋅g^-1 but also achieve a 92.5 % mercury(II) uptake within 100 min by a very low dosage of 0.1 g⋅L^-1. In addition, PPDCBAs exhibited excellent adsorption selectivity for mercury(II) compared with copper(II), cadmium(II), zinc(II) and lead(II). Furthermore, as determined by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and the density functional theory (DFT) calculation, the mercury removal was found to be mainly dependent on the high density of chelating sites, the phenylic carboxyl moieties, which helped us to realize an ultra-trace amount mercury removal (from 10.8 μg⋅L^-1 to 0.6-0.8 μg⋅L^-1) for meeting drinking water standard requirements (1.0 μg⋅L^-1).

Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites

Water pollution by organic dyes, and its remediation, is an important environmental issue associated with ever-increasing scientific interest. Conducting polymers have recently come to the forefront as advanced agents for removing dye. The present review reports on the progress represented by the literature published in 2020–2022 on the application of conducting polymers and their composites in the removal of dyes from aqueous media. Two composites, incorporating the most important polymers, polyaniline, and polypyrrole, have been used as efficient dye adsorbents or photocatalysts of dye decomposition. The recent application trends are outlined, and future uses also exploiting the electrical and electrochemical properties of conducting polymers are offered.

Facile Synthesis and Life Cycle Assessment of Highly Active Magnetic Sorbent Composite Derived from Mixed Plastic and Biomass Waste for Water Remediation

Plastic and biomass waste pose a serious environmental risk; thus, herein, we mixed biomass waste with plastic bottle waste (PET) to produce char composite materials for producing a magnetic char composite for better separation when used in water treatment applications. This study also calculated the life cycle environmental impacts of the preparation of adsorbent material for 11 different indicator categories. For 1 functional unit (1 kg of pomace leaves as feedstock), abiotic depletion of fossil fuels and global warming potential were quantified as 7.17 MJ and 0.63 kg CO₂ equiv for production of magnetic char composite materials. The magnetic char composite material (MPBC) was then used to remove crystal violet dye from its aqueous solution under various operational parameters. The kinetics and isotherm statistical theories showed that the sorption of CV dye onto MPBC was governed by pseudo-second-order, and Langmuir models, respectively. The quantitative assessment of sorption capacity clarifies that the produced MPBC exhibited an admirable ability of 256.41 mg g^-1. Meanwhile, the recyclability of 92.4% of MPBC was demonstrated after 5 adsorption/desorption cycles. Findings from this study will inspire more sustainable and cost-effective production of magnetic sorbents, including those derived from combined plastic and biomass waste streams.

Removal of both anionic and cationic dyes from wastewater using pH-responsive adsorbents of L-lysine molecular-grafted cellulose porous foams

High adsorption efficiency, active to both anionic and cationic dyes and simple desorption are three main challenges of the existed adsorbents for decolorization of the dye-contained wastewaters. Porous foams based on L-lysine (Lys) molecular-grafted cellulose were firstly designed and fabricated to overcome those challenges. Cellulose were grafted with Lys in 1-butyl-3-methylimidazolium chloride (BMIMCl) via a chemical connection resulted from glycidyl methacrylate (GMA). The synthesized cellulose derivative (Cell-g-PGMA-Lys) was regenerated in the morphology of foam by non-solvent induced phase inversion from the BMIMCl-based solutions. The presence of Lys moieties and porous structure of Cell-g-PGMA-Lys were confirmed with a series of instrumental analysis. Both anionic reactive brilliant red X-3B (RBR X-3B) and cationic methylene blue (MB) were effectively adsorbed on and desorbed from Cell-g-PGMA-Lys by adjusting the solution pH value. Cell-g-PGMA-Lys had higher adsorption capacities than most of the reported adsorbents and was easy to separate from the decolorized water. It could be reused many times with little reduction of the adsorption capacity, which remained 86.9% and 92.5% for RBR X-3B and MB respectively after six adsorption-desorption cycles. The isothermal and kinetic adsorption proved that dyes were adsorbed single-layered on Cell-g-PGMA-Lys depending upon the electrostatic interaction between adsorbent and adsorbate.

Free-standing hybrid film for separation of dye pollutant with self-cleaning ability under visible light

The development of low cost and environmental-friendly materials has long been an ambition for effective removal of dye pollutants in complex water environments. In this study, a free-standing separation film of bacterial cellulose reinforced/functionalized by graphitic phase carbon nitride is developed by a facile suction filtration strategy, of which the former is precoated by polypyrrole, and the latter is pre-doped by oxygen to endow the as-obtained film an enhanced photocatalytic performance and self-cleaning ability. The as-obtained film exhibits a high tensile stress of 51.8 ± 1.1 MPa, and a high resistance to cold, heat, acid and alkali. For typical dyes of methylene blue and rhodamine B, a high dye rejection rate of 99.9% at 138 L/m²•h•bar feed flux is obtained by the as-obtained film. Even at a salt concentration higher than 5%, it still maintained high dye removal rates and achieves effective separation of dye and salt. Simultaneously, a high dye photocatalytic degradation of the composite films rates up to 98% in only 90 min, and a high self-cleaning ability demonstrated by recovery of flux after light treatment in cyclic tests. The density functional theory calculation validates the beneficial effects of improved light response range and separated photogenerated electron/holes for the effective degradation of dyes by oxygen-doped carbon nitride coupled with one-dimensional polypyrrole chains. Overall, this study proposes a new direction for the separation of dye pollutants with a high visible-light self-cleaning capacity by structural tailoring of bacterial cellulose with carbon nitride.

Polypyrrole/zeolite composite - A nanoadsorbent for reactive dyes removal from synthetic solution

Synthetic dyes are among the common pollutants in the ecosystem. In the present study, polypyrrole/zeolite (PPy/Ze) nanocomposite was prepared and subsequently assessed for the removal of Reactive blue (RB) and Reactive red (RR) from synthetic solution. The polymeric PPy/Ze composite was synthesized by chemical oxidation of pyrrole in the presence of zeolite. Electron microscopic images (transmission and scanning) indicate that PPy/Ze nanocomposite was spherical in shape with an average size of 40-80 nm. The characteristic pyrrole and zeolite Fourier transform infrared spectrum peaks (1542 cm^-1, 1463 cm^-1, 1156 cm^-1, 1054 cm^-1, 879 cm^-1 and 756 cm^-1) in the nanocomposite confirmed zeolite integration with polypyrrole. Experimental variables such as PPy/Ze nanocomposite dose, initial RB and RR concentration, reaction temperature and pH were optimized. The PPy/Ze nanocomposite adsorbed 86.2% of RB and 88.3% of RR from synthetic solution at optimal conditions (pH 9, initial RR or RB concentration, 75 mg/l; PPy/Ze dose, 1.8 g/l; and temperature, 50 °C). Freundlich isotherm model and pseudo-second-order kinetics showed better fit for both RB and RR removal from synthetic solution. X-ray diffractogram confirmed the amorphous nature of PPy/Ze nanocomposite and that it was not altered even after dye adsorption. Adsorption-desorption studies showed that the composite has satisfactory adsorption potential for four cycles. The results show that the PPy/Ze nanocomposite could be used for the removal of dyes from wastewaters.

Resource utilization of organic spent adsorbent to prepare three-dimensional sulfate-functionalized layered double oxide for superior removal of azo dye

Developing superior, rapid, cost-effective adsorbents derived from organic spent adsorbent is an economically sustainable way for purifying azo dye wastewater. Herein, we report a precursor-calcination strategy for the recycle of the organic spent adsorbent to a high value-added three-dimensional sulfate-functionalized MgAl-layered double oxide (3S-LDO). Thanks to the unique property of the sulfate group and LDO, 3S-LDO exhibited a superior (4340.71 mg/g) and ultrafast (<1 h) adsorption toward methyl orange (MO, as the representative of azo dye). A thermodynamic study revealed that the reaction process was spontaneous and exothermic. FT-IR, XPS, and XRD results confirmed that the sulfate from 3S-LDO played a vital role in MO removal wherein the S=O bond (with the electrophilic character) from SO₄^2- interacted with the N=N double bond (with rich electron) in MO through the electron donor-acceptor mechanism. And the "memory effect" and surface complexation of 3S-LDO further strengthened the MO adsorption. More importantly, 3S-LDO could work efficiently in a wide pH range and even in the presence of competitive anions (e.g., Cl^-, NO₃^-, and CO₃^2-). Multiple cyclic runs and selective tests demonstrated the excellent reusability and explicit selectivity of 3S-LDO. This work not only provides a prospective sulfate-functionalized adsorbent from organic waste for rapid azo dye removal from wastewater but also achieves the high value-added utilization of organic waste.