In-situ loading synthesis of graphene supported PtCu nanocube and its high activity and stability for methanol oxidation reaction

Molybdenum-doping to enhance the deprotonation ability of nickel-based hydroxide electrocatalysts for ethanol oxidation

With technological advancements, the practical application of ethanol oxidation reaction (EOR) is becoming increasingly promising, yet the need for higher ethanol concentrations highlights the growing importance of the deprotonation ability (Ni2+ to Ni3+) of the catalyst. The deprotonation ability is the key step for nickel-based catalysts in EOR, as it is essential for Ni2+ to continuously undergo deprotonation to transform into Ni3+ in order to maintain the continuous EOR. Herein, we developed Mo-doped Ni(OH)2 nanosheets by a hydrothermal method. The Mo-doped Ni(OH)2 nanosheets show excellent EOR performance due to the high valence doping of Mo, the onset potential of the oxidation peak (Ni2+ to Ni3+) appears at a position with a small overpotential,. The in-situ Raman spectroscopy technique further characterized the increase in NiOOH in the process of EOR. The Mo-doped Ni(OH)2 nanocomposite catalyst facilitates the oxidation of Ni2+ into Ni3+. Based on the above theoretical guidance, Mo-doped Fe/Ni(OH)2 nanosheets was designed and synthesized. The outstanding EOR performance of the Mo-Fe/Ni(OH)2-3 showed a potential of 1.352 V at 10 mA cm-2. The catalyst was used to design three-electrode reversible zinc-ethanol-air battery (T-RZEAB), which effectively overcomes the opposing kinetic and thermodynamic requirements for EOR and oxygen reduction reaction (ORR) catalysts in the oxygen electrode. The charging voltage of T-RZEAB with Mo-Fe/Ni(OH)2-3 is 240 mV lower than that of a traditional zinc-air battery at 25 mA cm-2.

Hierarchical PtCuMnP Nanoalloy for Efficient Hydrogen Evolution and Methanol Oxidation

The higher amount of Pt usage and its poisoning in methanol oxidation reaction in acidic media is a major setback for methanol fuel cells. Herein, a promising dual application high-performance electrocatalyst has been developed for hydrogen evolution and methanol oxidation. A low Pt-content nanoalloy co-doped with Cu, Mn, and P is synthesized using a modified solvothermal process. Initially, ultrasmall ≈2.9 nm PtCuMnP nanoalloy is prepared on N-doped graphene-oxide support and subsequently, it is characterized using several analytical techniques and examined through electrochemical tests. Electrochemical results show that PtCuMnP/N-rGO has a low overpotential of 6.5 mV at 10 mA cm-2 in 0.3 m H2SO4 and high mass activity for the hydrogen evolution reaction. For the methanol oxidation reaction, the PtCuMnP/N-rGO electrocatalyst exhibits robust performance. The mass activity of PtCuMnP/N-rGO is 6.790 mA mg-1 Pt, which is 7.43 times higher than that of commercial Pt/C (20% Pt). Moreover, in the chronoamperometry test, PtCuMnP/N-rGO shows exceptionally good stability and retains 72% of the initial current density even after 20,000 cycles. Furthermore, the PtCuMnP/N-rGO electrocatalyst exhibits outstanding performance for hydrogen evolution and methanol oxidation along with excellent anti-poisoning ability. Hence, the developed bifunctional electrocatalyst can be used efficiently for hydrogen evolution and methanol oxidation.

Breaking Continuously Packed Bimetallic Sites to Singly Dispersed on Nonmetallic Support for Efficient Hydrogen Production

We have synthesized Pt1Zn3/ZnO, also termed 0.01 wt %Pt/ZnO-O2-H2, as a catalyst containing singly dispersed single-atom bimetallic sites, also called a catalyst of singly dispersed bimetallic sites or a catalyst of isolated single-atom bimetallic sites. Its catalytic activity in partial oxidation of methanol to hydrogen at 290 °C is found to be 2-3 orders of magnitude higher than that of Pt-Zn bimetallic nanoparticles supported on ZnO, 5.0 wt %Pt/ZnO-N2-H2. Selectivity for H2 on Pt1Zn3/ZnO reaches 96%-100% at 290-330 °C, arising from the uniform coordination environment of single-atom Pt1 in singly dispersed single-atom bimetallic sites, Pt1Zn3 on 0.01 wt %Pt/ZnO-O2-H2, which is sharply different from various coordination environments of Pt atoms in coexisting PtxZny (x ≥ 0, y ≥ 0) sites on Pt-Zn bimetallic nanoparticles. Computational simulations attribute the extraordinary catalytic performance of Pt1Zn3/ZnO to the stronger adsorption of methanol and the lower activation barriers in O-H dissociation of CH3OH, C-H dissociations of CH2O to CO, and coupling of intermediate CO with atomic oxygen to form CO2 on Pt1Zn3/ZnO as compared to those on Pt-Zn bimetallic nanoparticles. It demonstrates that anchoring uniform, isolated single-atom bimetallic sites, also called singly dispersed bimetallic sites on a nonmetallic support can create new catalysts for certain types of reactions with much higher activity and selectivity in contrast to bimetallic nanoparticle catalysts with coexisting, various metallic sites MxAy (x ≥ 0, y ≥ 0). As these single-atom bimetallic sites are cationic and anchored on a nonmetallic support, the catalyst of singly dispersed single-atom bimetallic sites is different from a single-atom alloy nanoparticle catalyst. The critical role of the 0.01 wt %Pt in the extraordinary catalytic performance calls on fundamental studies of the profound role of a trace amount of a metal in heterogeneous catalysis.

Synthesis of Polyethylene Terephthalate (PET) with High Crystallization and Mechanical Properties via Functionalized Graphene Oxide as Nucleation Agent

In this work, a novel functionalized graphene oxide nucleating agent (GITP) was successfully synthesized using a silane coupling agent (IPTES), and polymer block (ITP) to efficiently improve the crystallization and mechanical performance of PET. To comprehensively investigate the effect of functionalized GO on PET properties, PET/GITP nanocomposites were prepared by introducing GITP into the PET matrix using the melt blending method. The results indicate that PET/GITP exhibits better thermal stability and crystallization properties compared with pure PET, increasing the melting temperature from 244.1 °C to 257.1 °C as well as reducing its crystallization half-time from 595 s to 201 s. Moreover, the crystallization temperature of PET/GITP nanocomposites was increased from 185.1 °C to 207.5 °C and the tensile strength was increased from 50.69 MPa to 66.8 MPa. This study provides an effective strategy for functionalized GO as a nucleating agent with which to improve the crystalline and mechanical properties of PET polyester.

Synthesis of MnOOH and its application in a supporting hexagonal Pd/C catalyst for the oxygen reduction reaction

With the expansion of global energy problems and the deepening of research on oxygen reduction reaction (ORR) in alkaline media, the development of low cost and high electrocatalytic performance catalysts has become a research hotspot. In this study, a hexagonal Pd-C-MnOOH composite catalyst was prepared by using the triblock copolymer P123 as the reducing agent and protective agent, sucrose as the carbon source and self-made MnOOH as the carrier under hydrothermal conditions. When the Pd load is 20% and the C/MnOOH ratio is 1 : 1, the 20% Pd-C-MnOOH-1 : 1 catalyst obtained by the one-step method has the highest ORR activity and stability in the alkaline system. At 1600 rpm, the limiting diffusion current density and half-wave potential of the 20% Pd-C-MnOOH-1 : 1 electrocatalyst are -4.78 mA cm-2 and 0.84 V, respectively, which are better than those of the commercial 20%Pd/C catalyst. According to the Koutecky-Levich (K-L) equation and the linear fitting results, the electron transfer number of the 20%Pd-C-MnOOH-1 : 1 electrocatalyst for the oxygen reduction reaction is 3.8, which is similar to that of a 4-electron process. After 1000 cycles, the limiting diffusion current density of the 20%Pd-C-MnOOH-1 : 1 catalyst is -4.61 mA cm-2, which only decreases by 3.7%, indicating that the 20%Pd-C-MnOOH-1 : 1 catalyst has good stability. The reason for the improvement of the ORR performance of the Pd-C-MnOOH composite catalyst is the improvement of the conductivity of the carbon layer formed by original carbonization, the regular hexagonal highly active Pd particles and the synergistic catalytic effect between Pd and MnOOH. The method of introducing triblock copolymers in the synthesis of oxides and metal-oxide composite catalysts is expected to be extended to other electrocatalysis fields.

Ultrafine oxygenophilic nanoalloys induced by multifunctional interstitial boron for methanol oxidation reaction

Interface construction is one of the most feasible approaches to optimize the physical and chemical properties of noble metal-based catalysts and consequently improve their catalytic performance. Herein, the design of effective reaction interfaces by bimetallic, trimetallic or polymetallic alloying has been extensively explored. In this research, metalloid boron (B) was alloyed within palladium-iridium (Pd-Ir) nanoalloy supported on nitrogen-doped graphene (NG) to promote the methanol oxidation reaction (MOR) in alkaline media. Being benefited from this, the optimum Pd7IrBx/NG catalyst exhibited enhanced EOR activity mass activity (1141.7 mA mg-1) and long-term stability (58.2 % current density retention rate after 500 cycles of cyclic voltammetry). The mechanism was further studied by electrochemical experiments and characterization, which highlighted that the multifunctional effect of electronic effect and strain effect and kinetic optimization induced by boron doping played a very positive role on MOR.

The Pt/g-C3N4-CNS catalyst via in situ synthesis process with excellent performance for methanol electrocatalytic oxidation reaction

g-C3N4-CNS prepared by the in situ synthetic method has a larger specific surface area and more anchoring sites for Pt, which promotes the dispersion of Pt and enhances the electrocatalytic performance.