Enhanced visible-light-driven photocatalytic activity of bismuth oxide via the decoration of titanium carbide quantum dots

Revealing the potential of quantum dot nanomaterials in photocatalytic applications

The practical fabrication of quantum dot materials, including their size, shape, form, crystallinity, and chemical composition, is a crucial research area in the field of photocatalysis. Quantum dots can effectively enhance the separation and transfer of carriers and expand the utilization of visible light when used in heterogeneous junctions with wide bandgap semiconductors. Additionally, they exhibit excellent photosensitivity properties that significantly improve the material's capacity for absorbing visible light. This paper systematically presents an overview of the outstanding optical properties exhibited by quantum dots based on both domestic and international research on photocatalytic materials. Furthermore, it summarizes the research content, characteristics, and current challenges associated with common types of quantum dots and photocatalytic materials while highlighting their applications in environmental remediation and energy production. Finally, this paper anticipates future trends in the development of photocatalysis by providing valuable insights into more efficient semiconductor materials that are cost-effective yet environmentally friendly.

Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress

Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.

Insight into the selection of oxidant in persulfate activation system: The effect of the target pollutant properties

As a rising branch of advanced oxidation processes, persulfate activation has attracted growing attention. Unlike catalysts that have been widely studied, the selection of persulfate is previously overlooked. In this study, the affecting factors of persulfates were studied. The effect of target pollutant properties on superior persulfate species (the species with a higher degradation efficiency) was investigated by multiwalled carbon nanotube (MWCNT)/persulfate catalytic systems. Innovatively, the EHOMO (or vertical ionization potential (VIP)) value of the target pollutant was proposed to be an index to judge the superior persulfate species, and the threshold is VIP= 6.397-6.674 eV, EHOMO= -8.035∼- 7.810 eV, respectively. To be specific, when the VIP of phenolic compounds is higher (or EHOMO of phenolic compounds is lower) than the threshold, the catalytic performance of peroxymonosulfate would be higher than that of peroxydisulfate. Moreover, the effects of coexisting cations on peroxydisulfate superior species were further investigated. It was illustrated that the hydrated cation radius of coexisting cations would influence the pollutant degradation efficiency under some circumstances. This study provides a new approach to improve the cost of persulfate activation systems and promotes the underlying downstream application of persulfate activation systems.

Ultrahigh Performance H2 O2 Generation by Single-Atom Fe Catalysts with N/O Bidentate Ligand via Oxalic Acid and Oxygen Molecules Activation

Single-atom catalysts (SACs) for photocatalytic hydrogen peroxide (H2 O2 ) generation are researched but it is still challenging to obtain high H2 O2 yields. Herein, graphite carbon nitride (FeSA /CN) confined single Fe atoms with N/O coordination is prepared, and FeSA /CN shows high H2 O2 production via oxalic acid and O2 activation. Under visible light illumination, the concentration of H2 O2 generated by FeSA /CN can achieve 40.19 mM g-1 h-1 , which is 10.44 times higher than that of g-C3 N4 . The enhanced H2 O2 generation can be attributed to the formation of metal-organic complexes and rapid electron transfer. Moreover, the O2 activation of photocatalysts is revealed by 3,3',5,5'-tetramethylbenzidine oxidation. The results display that the O2 activation capacity of FeSA /CN is higher than that of g-C3 N4 , which facilitates the formation of H2 O2 . Finally, density functional theory calculation demonstrates that O2 is chemically adsorbed on Fe atomic sites. The adsorption energy of O2 is enhanced from -0.555 to -1.497 eV, and the bond length of OO is extended from 1.235 to 1.292 Å. These results exhibit that the confinement of single Fe atoms can promote O2 adsorption and activation. Finally, the photocatalytic mechanism is elaborated, which provides a deep understanding for SACs-catalyzed H2 O2 generation.

Metal-carbon hybrid materials induced persulfate activation: Application, mechanism, and tunable reaction pathways

Proper wastewater treatment has always been the focus of human society, and many researchers have been working to find efficient and stable wastewater treatment technologies. Persulfate-based advanced oxidation processes (PS-AOPs) mainly rely on persulfate activation to form reactive species for pollutants degradation and are considered to be one of the most effective wastewater treatment technologies. Recently, metal-carbon hybrid materials have been diffusely used for PS activation because of their high stability, abundant active sites, and easy applicability. Metal-carbon hybrid materials can successfully overcome the shortcomings of onefold metal catalysts and carbon catalysts by combing the complementary advantages of the two components. This article reviews recent studies about metal-carbon hybrid materials-mediated PS-AOPs for wastewater decontamination. The interactions of metal and carbon materials, as well as the active sites of metal-carbon hybrid materials, are introduced first. Then, the application and mechanism of metal-carbon hybrid materials-mediated PS activation are presented in detail. Lastly, the modulation methods of metal-carbon hybrid materials and their tunable reaction pathways were discussed. The prospect of future development directions and challenges is proposed to facilitate metal-carbon hybrid materials-mediated PS-AOPs to take a step further for practical application.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

A novel fluorescent nanoprobe based on potassium permanganate-functionalized Ti3C2 QDs for the unique "turn-on" dual detection of Cr3+ and Hg2+ ions

Titanium carbide quantum dots (Ti₃C₂ QDs) were synthesized by ammonia-assisted hydrothermal method. We also synthesized potassium permanganate (KMnO₄)-functionalized Ti₃C₂ QDs (Mn-QDs) by modifying Ti₃C₂ nanosheets with KMnO₄ and then cutting the functional nanosheets into Mn-QDs. The Ti₃C₂ QDs and Mn-QDs were characterized by fluorescence spectroscopy (FL), Fourier transform infrared spectroscopy (FTIR), UV-vis spectrophotometry (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Furthermore, the modified Mn-QDs have strong luminescence ability and good dispersion stability, which can be used for Cr³⁺ and Hg²⁺ double ion detection with enhanced fluorescence specificity. Cr³⁺/Hg²⁺ and negatively charged Mn-QDs are bound together by electrostatic interactions. Meanwhile, the surface of Mn-QDs is rich in functional groups, which interacts with Cr³⁺/Hg²⁺ to modify the surface traps, leading to defect passivation and exhibiting photoluminescence enhancement. For the dynamic quenching produced by the interaction of Mn-QDs with Hg²⁺ within 50 μM, it may be caused by the complex formation of Hg²⁺ trapped by the amino group on the surface of Mn-QDs. The detection limits for Cr³⁺ and Hg²⁺ were 0.80 μM and 0.16 μM, respectively. The recoveries of Cr³⁺ and Hg²⁺ ions in real water samples were 93.79-105.10% and 93.91-102.05%, respectively, by standard addition recovery test. In this work, the application of Mn-QDs in Cr³⁺ and Hg²⁺ ion detection was researched, which opens a new way for its application in the field of detecting heavy metal ions.

Insight on efficiently oriented oxidation of petroleum hydrocarbons by redistribution of oxidant through inactivation of soil organic matter coupled with passivation of manganese minerals

While extensive works focused on the enhancement of the activity of heterogeneous Fenton catalysts, little was paid attention to the inhibition of soil organic matter (SOM) and Mn minerals in soil remediation. Here, the oxidation of petroleum hydrocarbons in soils (S1: 4.28 % SOM, S2: 6.04 % SOM, S3: 10.33 % SOM) with inactivated SOM and passivated Mn oxides regulating by calcium superphosphate (Ca(H₂PO₄)₂) was carried out. Oily sludge pyrolysis residue was used as precursors to prepare an oleophilic iron-supported solid catalyst (Fe-N @ PR). For regulated systems, under the optimal conditions of 1.8 mmol/g H₂O₂ and 0.05 g/g Fe-N @ PR, 72 ∼ 91 % of total petroleum hydrocarbons (TPHs: 15,616.58 mg/kg) were oxidized, which was 38 ∼ 45 % higher than that of control systems. The mechanism of efficient oxidation was proposed that the passivated Mn minerals stabilized H₂O₂ redistributing more H₂O₂ to sustainably produce •OH, and the inactivated SOM improved the relative reactivity of •OH to TPHs. Additionally, the passivation of Mn oxides was mainly related to the binding of H₂PO₄^-, and the inactivation of SOM was realized by Ca²⁺ combing with -OH and C-O-C to form stable complexes. This study brought us a new perspective on soil remediation through passivating Mn minerals and inactivating SOM.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

Efficient catalytic degradation of alkanes in soil by a novel heterogeneous Fenton catalyst of functionalized magnetic biochar

In this study, sodium dodecyl sulfate (SDS) functionalized magnetic biochar (SDS-Fe@BC) was successfully prepared. Compared to other traditional heterogeneous Fenton catalysts, more total petroleum hydrocarbons (TPH) (3499.40 mg kg^-1) was adsorbed from soil to the surface of SDS-Fe@BC through hydrophobic interaction between alkyls in alkanes and SDS-Fe@BC, which formed an efficient interface oxidation system. In SDS-Fe@BC-mediated heterogeneous Fenton system, 10,191.41 mg kg^-1 (88.10%) TPH was degraded in the presence of 400 mM H₂O₂, which was 1.38-5.67 folds than that of H₂O₂ alone, Fe²⁺, zero valent iron (ZVI), Fe₃O₄, pristine biochar (BC), and Fe@BC. Moreover, all individual alkanes were efficiently degraded (>75%), and the higher the initial amount of individual alkane, the more the degradative amount in the SDS-Fe@BC/H₂O₂ system. Additionally, TPH degradation was highly related to the mass ratio of SDS/Fe@BC, H₂O₂ concentration, SDS-Fe@BC dosage, and initial pH in the SDS-Fe@BC/H₂O₂ system, and the optimal values were 1:5, 400 mM, 50 mg g^-1, and pH 7, respectively. Radical quenching experiments revealed that hydroxyl radicals (•OH) generated on the surface of SDS-Fe@BC was the dominated reactive oxidative species (ROS) responsible for alkanes degradation. After five cycles, SDS-Fe@BC still remained a high catalytic activity for alkanes degradation (73.21%), showing its excellent reusability. This study proved that the SDS-Fe@BC can be used as a potential heterogeneous Fenton catalyst for petroleum-contaminated soil remediation.

g-C3N4 nanosheets functionalized yttrium-doped ZrO2 nanoparticles for efficient photocatalytic Cr(VI) reduction and energy storage applications

Novel g-C₃N₄ functionalized yttrium-doped ZrO₂ hybrid heterostructured (g-YZr) nanoparticles have been synthesized to investigate photocatalytic Cr(VI) reduction as well as electrochemical energy storage applications. The nanoparticles have been characterized to examine their structural, optical, and photocatalytic properties. XRD confirmed the incorporation of dopant ions and heterostructure development between g-C₃N₄ and doped ZrO₂. When g-C₃N₄ was doped with ZrO_2, the ability of light adsorption was greatly enhanced due to the narrow band gap. The distinctive structure of g-YZr exhibited outstanding photocatalytic Cr(VI) reduction owing to its superior surface area, which greatly prevented the charge carriers' recombination rate and exhibited superior photocatalytic performance within 90 min of solar light irradiation. Furthermore, these catalysts demonstrated similar catalytic Cr(VI) reduction activity following four repeatability tests, indicating the exceptional structural stability of g-YZr catalysts. The electrochemical performance of the electrodes revealed that g-YZr exhibited superior specific capacitance over the other electrodes owing to extra energetic sites and robust synergic effect. Enhanced specific capacitance and long cyclic stability of the hybrid heterostructures displayed their usefulness for energy storage applications.

Self-powered Aptasensors Made with the In2O3-In2S3-Ti3C2 Composite for Dual-mode Detection of Microcystin-LR

A dual-mode self-powered aptasensing platform of photoelectrochemical (PEC) and photofuel cell (PFC) was constructed for Microcystin-LR (MC-LR) detection. Specifically, the In₂O₃-In₂S₃-Ti₃C₂ (IO-IS-TC) composite was facilely assembled on the base of MOF-derived In₂O₃ hollow tubulars, and the integrated mechanism and photoconversion efficiency are proposed and discussed in detail. Herein, a promising dual-mode sensing platform was constructed using the IO-IS-TC composite as a photoanode matrix with higher output power and obvious photocurrent response. Moreover, the dual-mode sensing platform did not require external bias and the addition of sacrificial agents under visible light irradiation. The enhanced PEC properties can be attributed to the matched energy level of ternary components and the improved separation of photogenerated carriers. Moreover, aptamer-based recognition was adopted to catch MC-LR molecules, which realized the highly sensitive and selective detection. The PFC aptasensor was exhibited at 50-5 × 10⁵ pmol/L with a detection limit of 17.4 pmol/L, and the PEC aptasensor was realized from 0.5 to 4 × 10⁵ pmol/L with a detection limit of 0.169 pmol/L. The proposed aptasensing platform showed good specificity, reproducibility, and stability, which paved the way for the construction of a fast and ultrasensitive PEC sensing methodology for environmental analysis.

Photodegradation of 5-flurouracil, carvedilol, para-chlorophenol and methimazole with 3D MnWO4 nanoflower modified Ag2WO4 nanorods: A non-genotoxic nanomaterial for water treatment

The present study focused on the photocatalytic degradation of 5-Flurouracil (FU), carvedilol (Car), para-chlorophenol (PCP) and methimazole (Met) under visible light irradiation by MnWO₄/Ag₂WO₄ (MWO/AWO) nanohybrid. Here, MWO/AWO nanohybrid was characterized by XRD, TEM, EDS, XPS, ESR, EIS, BET and DRS. The band gap energy of the MWO/AWO nanohybrid was found to be 2.75 eV, which enables effective photocatalytic activity of nanohybrid under visible light. The photocatalytic degradation of various PhACs such as Fu, Car, PCP and Met was found to be 98.8, 100, 98 and 98.1% respectively. The degradation efficiency of the MWO/AWO nanohybrid on various PhACs was higher than the pure MWO and AWO nanoparticle. The effective formation of OH• and •O₂ by MWO/AWO nanohybrid played an important role in degradation of PhACs and it was determined by radical scavenging experiment. Further, the intermediates formed during the photocatalytic process were analyzed by GC-MS/MS to elucidate the photodegradation pathway and the results reveal the complete mineralization of the PhACs. The toxicity of the degraded product was performed against on Bacillus subtilis and Escherichia coli where it shows that the nanohybrid possesses high relative growth inhibition than AWO and MWO nanoparticles. In addition, the genotoxicity of the nanohybrid against Allium cepa was performed and it exhibited lower toxicity. The synthesized nanohybrid proves to be an excellent photocatalyst with good stability, reusability, eco-friendly, and cost-effective material for implementation in practical applications.

Hydroxylamine promoted Fe(III) reduction in H2O2/soil systems for phenol degradation

Production of hydroxyl radicals (•OH) upon the oxidation of solid Fe(II) by O₂ or H₂O₂ in soils and sediments has been confirmed, which benefits in situ remediation of contaminants. However, Fe(III) reduction by H₂O₂ is rate-limiting. Accelerating the Fe(III)/Fe(II) cycle could improve the efficiency of remediation. This study intended to use hydroxylamine to promote Fe(III)/Fe(II) cycle during 100 g/L soil oxidation by H₂O₂ for phenol degradation. The removal of phenol was 76% in 3 h during soil oxidation with 1 mM H₂O₂ in the presence of 1 mM hydroxylamine but was negligible in the absence of hydroxylamine. Fe(III) in the soil was reduced to 0.21 mM Fe(II) by 1 mM hydroxylamine in 30 min. The accelerated cycle of Fe(III)/Fe(II) in the soil by hydroxylamine could effectively decompose H₂O₂ to produced •OH, which was responsible for the effective enhancement of phenol degradation during soil oxidation. Under the conditions of 1 mM H₂O₂ and 100 g/L soil, the pseudo-first-order kinetic constant of phenol degradation increased proportionally from 0.0453 to 0.0844 min^-1 with the increase of hydroxylamine concentrations from 0.5 to 1 mM. The kinetic constant also increased from 0.0041 to 0.0111 min^-1 with H₂O₂ concentration increased from 0.5 to 2 mM, while it decreased from 0.0100 to 0.0051 min^-1 with soil dosage increased from 20 to 200 g/L. In addition, column experiments showed that phenol (10 mg/L) degradation ratio kept at about 48.7% with feeding 2 mM hydroxylamine and 2 mM H₂O₂ at 0.025 PV/min. Column experiments suggested an optional application of hydroxylamine and H₂O₂ for in situ remediation. The output of this study provides guidance and optional strategies to enhance contaminant degradation during soil oxidation.

Parasitic Light Absorption, Rate Laws and Heterojunctions in the Photocatalytic Oxidation of Arsenic(III) Using Composite TiO2 /Fe2 O3

Composite photocatalyst‐adsorbents such as TiO₂/Fe₂O₃ are promising materials for the one‐step treatment of arsenite contaminated water. However, no previous study has investigated how coupling TiO₂ with Fe₂O₃ influences the photocatalytic oxidation of arsenic(III). Herein, we develop new hybrid experiment/modelling approaches to study light absorption, charge carrier behaviour and changes in the rate law of the TiO₂/Fe₂O₃ system, using UV‐Vis spectroscopy, transient absorption spectroscopy (TAS), and kinetic analysis. Whilst coupling TiO₂ with Fe₂O₃ improves total arsenic removal by adsorption, oxidation rates significantly decrease (up to a factor of 60), primarily due to the parasitic absorption of light by Fe₂O₃ (88 % of photons at 368 nm) and secondly due to changes in the rate law from disguised zero‐order kinetics to first‐order kinetics. Charge transfer across this TiO₂‐Fe₂O₃ heterojunction is not observed. Our study demonstrates the first application of a multi‐adsorbate surface complexation model (SCM) towards describing As(III) oxidation kinetics which, unlike Langmuir‐Hinshelwood kinetics, includes the competitive adsorption of As(V). We further highlight the importance of parasitic light absorption and catalyst fouling when designing heterogeneous photocatalysts for As(III) remediation.

MXenes based nano-heterojunctions and composites for advanced photocatalytic environmental detoxification and energy conversion: A review

Extensive research is being done to develop multifunctional advanced new materials for high performance photocatalytic applications in the field of energy production and environmental detoxification, MXenes have emerged as promising materials for enhancing photocatalytic performance owing to their excellent mechanical properties, appropriate Fermi levels, and adjustability of chemical composition. Numerous experimental and theoretical research works implied that the dimensions of MXenes have a significant impact on their performance. For photocatalysis to thrive in the future, we must understand the current state of the art for MXene in different dimensions. Using MXene co-catalysts in widely used in photocatalytic applications such as CO₂ reduction, hydrogen production and organic pollutant oxidation, this study focuses on the most recent developments in MXenes based materials, structural modifications, innovations in reaction and material engineering. It has been reported that using 5 mg of CdS-MoS₂-MXene researchers were able to generate as high as 9679 μmol/g/h hydrogen under visible light. The MXenes based heterojunction photocatalyst Co₃O₄/MXene was utilized to degrade 95% bisphenol A micro-pollutant in just 7 min. Numerous novel materials, their preparations and performances have been discussed. Depending upon the nature of MXene-based materials, the synthesis techniques and photocatalytic mechanism of MXenes as co-catalyst are also summarized. Finally, some final thoughts and prospects for developing highly efficient MXene-based photocatalysts are provided which will indeed motivate researchers to design novel hybrid materials based on MXenes for sustainable solutions to energy and pollution issues.

Fabrication of g-C3N4/Bi2WO6 as a direct Z-scheme excellent photocatalyst

To improve the photocatalytic efficiency of Bi2WO6, two types of g-C3N4 nanomaterial, g-C3N4 quantum dots and nanosheets, were incorporated with Bi2WO6 to construct two kinds of g-C3N4/Bi2WO6 photocatalysts with excellent photocatalytic activity.

Oxygen-vacancy abundant alpha bismuth oxide with enhanced cycle stability for high-energy hybrid supercapacitor electrodes

Bi₂O₃ is an outstanding electrode material due to its high theoretical specific capacity. Hence, the synthesis of δ-Bi₂O₃ materials with high oxygen-vacancy contents could improve their electrochemical performances but causes easy conversion to α-Bi₂O₃ with low oxygen-vacancy contents, leading to poor cycling stability and limited practical applications. To overcome these problems, an effective strategy for constructing high oxygen vacancies α-Bi₂O₃ on activated carbon fiber paper (ACFP) is developed in this study. To this end, ACFP/Bi(OH)₃ is first synthesized by the solvothermal method and then converted to ACFP/α-Bi₂O₃ by in situ electrochemical activation. The proposed innovative electrochemical method quickly and easily introduces oxygen vacancies while preserving the three-dimensional structure, thereby promoting the charge transfer and ions diffusion in ACFP/α-Bi₂O₃. Consequently, the specific capacity of ACFP/α-Bi₂O₃ reaches 906C g^-1 at 1 A g^-1, and the capacity retention remains above 70% after 3000 cycles, a value higher than that of δ-Bi₂O₃ (45%). Furthermore, the hybrid supercapacitor device assembled by ACFP/α-Bi₂O₃ delivers a maximum energy density of 114.9 Wh kg^-1 at 900 W kg^-1 and outstanding cycle stability with 73.56 % retention after 5500 cycles. In sum, the proposed ACFP/α-Bi₂O₃ with high performance and good stability looks promising for use as bismuth-based anode materials in supercapacitors and aqueous batteries.

Line defects in plasmatic hollow copper ball boost excellent photocatalytic reaction with pure water under ultra-low CO2 concentration

By using a low CO₂ concentration as a C1 source, the design of a plasmonic catalyst that can effectively photocatalytic CO₂ reduction is of great significance for sustainable and ecological development. Herein, the space confinement effect and liquid environment of the molten salt result in uniform hollow structure, while the strong aggressive force furnished via using molten salt enhances the formation of line defects. This special structure can not only provide a large number of active sites but also greatly accelerate the transport of photoinduced charge carriers. The hollow copper ball with line defects (CCu) shows excellent photocatalytic activity with pure water (1028.57 μmol g^-1), and it also shows good catalytic activity even under ultra-low CO₂ content, which far exceeds the catalytic activity of most semiconductor-based catalysts. This work is designed to simultaneously construct line defect and hollow structure in plasmatic metal nanoparticles for efficient photocatalytic CO₂ reduction.