Synergistic effect of flower-like MnFe2O4/MoS2 on photo-Fenton oxidation remediation of tetracycline polluted water

Recent trends in magnetic spinel ferrites and their composites as heterogeneous Fenton-like catalysts: A review

In recent years, there has been a growing interest in utilizing spinel ferrite and their nanocomposites as Fenton-like catalysts. The use of these materials offers numerous advantages, including ability to efficiently degrade pollutants and potential for long-term and repeated use facilitated by their magnetic properties that make them easily recoverable. The remarkable catalytic properties, stability, and reusability of these materials make them highly attractive for researchers. This paper encompasses a comprehensive review of various aspects related to the Fenton process and the utilization of spinel ferrite and their composites in catalytic applications. Firstly, it provides an overview of the background, principles, mechanisms, and key parameters governing the Fenton reaction, along with the role of physical field assistance in enhancing the process. Secondly, it delves into the advantages and mechanisms of H2O2 activation induced by different spinel ferrite and their composites for the removal of organic pollutants, shedding light on their efficacy in environmental remediation. Thirdly, the paper explores the application of these materials in various Fenton-like processes, including Fenon-like, photo-Fenton-like, sono-Fenton-like, and electro-Fenton-like, for the effective removal of different types of contaminants. Furthermore, it addresses important considerations such as the toxicity, recovery, and reuse of these materials. Finally, the paper presents the challenges associated with H2O2 activation by these materials, along with proposed directions for future improvements.

Efficient removal of tetracycline hydrochloride by high entropy oxides in visible photo-Fenton catalytic process

A novel type of oxide material, high entropy oxide (Mn0.2Fe0.2Co0.2Ni0.2Cu0.2)3O4 (MFO) composites with spinel structure were successfully synthesized by a simple solution combustion in this paper, and it was first applied to the degradation of antibiotic organic pollutants in water by photo-Fenton. SEM and BET characterization showed that the composite was porous and had a large specific surface area. XPS results showed that Fe, Mn, Cu, Co and Ni all participated in the redox reaction of the catalytic process. The redox pairs of Mn2+/Mn3+, Cu+/Cu2+, Co2+/Co3+, Ni2+/Ni3+ can accelerate the Fe2+/Fe3+ redox cycling in MFO to activate H2O2 and produce more reactive oxygen species. The catalytic performance of MFO composite was investigated using tetracycline hydrochloride (TC-HCl) as a model pollutant. The results displayed that the degradation rate of TC-HCl by MFO was 92.9% when the initial pH was 4, the dose of H2O2 was 50 mM, and the irradiation time was 60 min. The high entropy oxide MFO composites could build up an internal electric field, which restrains electron-hole recombination, improves the transfer of photogenerated charge carriers and maximize photocatalytic property. In addition, the free radical capture experiment determined that the main active species of the degradation reaction were e-, •O2- and •OH. The synergistic effect of the five components in the high entropy oxide strengthens lattice distortion and defects, increases oxygen vacancies, and thus has enhanced catalytic effect for TC-HCl degradation. This work shows that high entropy oxides have excellent catalytic performance for tetracycline organic pollutants, and it is speculated that high entropy oxides have good application prospects in the field of advanced oxidation technology for the degradation of organic pollutants.

Efficient Photocatalytic Activation of Peroxymonosulfate by Cobalt-Doped Oxygen-Vacancies-Rich BiVO4 for Rapid Tetracycline Degradation

In this work, cobalt-doped oxygen-vacancies-rich BiVO4 (Co/BiVO4-Vo) was successfully synthesized for the degradation of tetracycline (TC) by activated peroxymonosulfate (PMS) under visible light. The morphologies, microstructures, and optical properties of the photocatalysts were analyzed in detail. Co/BiVO4-Vo exhibited significantly enhanced degradation, removing 92.3% of TC within 10 min, which was greater than those of pure BiVO4 (62.2%) and oxygen-vacancies-rich BiVO4 (BiVO4-Vo) (72.0%), respectively. The photogenerated charge separation and transport properties were explored through surface photovoltage (SPV), photoluminescence spectrum (PL), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS) measurements. Additionally, an in-depth investigation was conducted on the photocatalytically assisted advanced oxidation processes based on SO4•- (SR-AOPs) for the degradation of organic pollutants. The experimental results showed that the introduction of oxygen vacancies and Co doping achieved an effective separation of photogenerated carriers, which could accelerate the cycling between Co3+ and Co2+ and further activate PMS. The results of free radical capture experiments and electron spin resonance (ESR) experiments showed that reactive oxygen species (ROSs) such as 1O2, •O2-, and SO4•- played a dominant role in the removal of pollutants. This work provides a novel insight into the further development of efficient and rapid PMS photoactivators for environmental remediation of water bodies.

Enhanced visible light photo-Fenton catalysis by Fe-doping oligo-layer natural molybdenite with efficient carrier spatial-driven Fe3+/Fe2+ cycle

Developing cost-effective and efficient photo-Fenton catalysts is crucial for advancing photo-Fenton technology. MoS2 is a representative transition metal disulfide with attractive photoresponsiveness, making it ideal for preparing composite photo-Fenton catalysts. In this study, natural molybdenite was innovatively utilized as a source of MoS2 (OM) to synthesize a low-cost and efficient Fe@MoS2 (OMF) composite photo-Fenton catalyst by comminution and adsorption, which was then applied to the remediation of antibiotic-contaminated water. The OMF composites exhibited significant catalytic activity, with a kinetic rate constant of 0.022 min-1, which was 3.1 times higher than that of the original OM (0.007 min-1), indicating a 3% increase. This was attributed to the synergistic effect of many photogenerated electrons and reversible Mo4+/Mo6+ redox pairs, which accelerated the regeneration of Fe2+. After three cyclic tests, the concentrations of dissolved Fe2+ and Mo2+ ions remained below 0.38 mg/L and 0.17 mg/L, respectively. This indicates the high reusability of the catalyst in cyclic experiments. Ultimately, the main active species, •OH and •O2 -, were generated during the photo-Fenton process, contributing significantly to TC degradation. This study may serve as a reference for the development and application of natural mineral composite photo-Fenton catalysts in the treatment of organic wastewater.

MoS2-based nanocomposites and aerogels for antibiotic pollutants removal from wastewater by photocatalytic degradation process: A review

Photocatalytic technologies based on molybdenum disulfide (MoS2) catalysts are effective, eco-friendly, and promising for antibiotic pollutants treatment. The technologies used by MoS2-based nanocomposites and aerogels for efficient degradation of antibiotics are reviewed in detail for the first time in this paper. The fundamental aspects of MoS2 were comprehensively scrutinized, encompassing crystal structure, optical properties, and photocatalytic principle. Then, the main synthesized methods and advantages/disadvantages for the preparation of MoS2-based nanocomposites and aerogels were systematically presented. Besides, a comprehensive overview of diverse MoS2-based nanocomposites and aerogels photo-degradation systems that enhanced the degradation of antibiotic pollutants were revealed. Meanwhile, the photo-degradation mechanism concentrated on the photoelectron transfer pathways and reactive oxygen species (ROS) were systematically evaluated. Finally, the challenges and perspectives for deeply development of MoS2-based nanocomposites and aerogels were discussed. This review may help researchers to deeply understand the research status of MoS2-based nanocomposites and aerogels for antibiotics removal, and makes clear the photo-degradation mechanism from photoelectron transfer pathways and ROS aspects of MoS2-based nanocomposites and aerogels.

Enhanced photo-Fenton degradation of contaminants in a wide pH range via synergistic interaction between 1T and 2H MoS2 and copolymer tea polyphenols/polypyrrole

In this study, we present the successful development of a unique photo-Fenton catalyst, 1T-2H MoS2@TP/PPy (MTP), achieved through the coating of a copolymer of tea polyphenol (TP) and polypyrrole (PPy) onto the surface of heterophase molybdenum disulfide (1T-2H MoS2). This innovative approach involves the integration of hydrothermal synthesis with copolymerization techniques. Our strategy utilizes nanoflower-like 1T-2H MoS2 as the foundational framework, which is then enveloped in TP and PPy copolymer. This innovative approach involves the integration of hydrothermal synthesis with copolymerization techniques. Our strategy utilizes nanoflower-like 1T-2H MoS2 as the foundational framework, which is then enveloped in TP and PPy copolymer. This distinctive architecture demonstrates exceptional catalytic performance owing to the hetero-phase entanglement of 1T-2H MoS2, which provides a diverse array of active sites. The coupled structure of TP and iron (TP-Fe2+/Fe3+) effectively overcome the limitation associated with the iron source. The incorporation of PPy not only reduces the recombination of photogenerated electron-hole pairs but also enhances the stability of 1T-2H MoS2. Remarkably, our experiments on the degradation of methylene blue (MB) and tetracycline (TC) degradation demonstrate that TP-Fe2+/Fe3+ significantly expands the pH applicability range of the MTP composite catalyst. Additionally, we examine several factors, including different catalysts, H2O2 addition, variations in light intensity, solution pH, temperature fluctuations, and the role of active species, to comprehensively understand their impact on the photo-Fenton degradation process. In conclusion, MTP composite exhibits robust catalytic stability and demonstrates a broad pH utilization range in the photo-Fenton oxidation process, highlighting its promising potential for a wide range of applications.

Integrated Sandwich-Paper 3D Cell Sensing Device to In Situ Wirelessly Monitor H2O2 Released from Living Cells

Point-of-care testing (POCT) has attracted great interest because of its prominent advantages of rapidness, precision, portability, and real-time monitoring, thus becoming a powerful biomedical device in early clinical diagnosis and convenient medical treatments. However, its complicated manufacturing process and high expense severely impede mass production and broad applications. Herein, an innovative but inexpensive integrated sandwich-paper three-dimensional (3D) cell sensing device is fabricated to in situ wirelessly detect H2O2 released from living cells. The paper-based electrochemical sensing device was constructed by a sealed sandwiched bottom plastic film/fiber paper/top hole-centered plastic film that was printed with patterned electrodes. A new (Fe, Mn)3(PO4)2/N-doped carbon nanorod was developed and immobilized on the sensing carbon electrode while cell culture solution filled the exposed fiber paper, allowing living cells to grow on the fiber paper surrounding the electrode. Due to the significantly shortening diffusion distance to access the sensing sites by such a unique device and a rationally tuned ratio of Fe2+/Mn2+, the device exhibits a fast response time (0.2 s), a low detection limit (0.4 μM), and a wide detection range (2-3200 μM). This work offers great promise for a low-cost and highly sensitive POCT device for practical clinic diagnosis and broad POCT biomedical applications.

Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress

Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.

Spatial confinement: A green pathway to promote the oxidation processes for organic pollutants removal from water

Organic pollutants removal from water is pressing owing to the great demand for clean water. Oxidation processes (OPs) are the commonly used method. However, the efficiency of most OPs is limited owing to the poor mass transfer process. Spatial confinement is a burgeoning way to solve this limitation by use of nanoreactor. Spatial confinement in OPs would (i) alter the transport characteristics of protons and charges; (ii) bring about molecular orientation and rearrangement; (iii) cause the dynamic redistribution of active sites in catalyst and reduce the entropic barrier that is high in unconfined space. So far, spatial confinement has been utilized for various OPs, such as Fenton, persulfate, and photocatalytic oxidation. A comprehensive summary and discussion on the fundamental mechanisms of spatial confinement mediated OPs is needed. Herein, the application, performance and mechanisms of spatial confinement mediated OPs are overviewed firstly. Subsequently, the features of spatial confinement and their effects on OPs are discussed in detail. Furthermore, environmental influences (including environmental pH, organic matter and inorganic ions) are studied with analyzing their intrinsic connection with the features of spatial confinement in OPs. Lastly, challenges and future development direction of spatial confinement mediated OPs are proposed.

Unveiling the roles of dissolved organic matters derived from different biochar in biochar/persulfate system: Mechanism and toxicity

Biochar has been frequently used as a persulfate (PS) activator due to its attractive properties, but dissolved organic matter (DOM) derived from the non‑carbonized part of biochar has received less attention, not to mention its specific role and impact in biochar/PS systems. In this study, wheat straw, municipal sludge, and swine bone were selected as the representative feed stocks of biochar. Subsequently, these three types of biochar were adopted to explore the roles of DOM in biochar/PS systems. Although the composition and amount of DOM derived from different biochar were discrepant, they exhibited similar effect in biochar/PS systems. To be specific, the pore-clogging effect of DOM on biochar suppressed the adsorption capacity and catalytic performance of the three biochar. Furthermore, the removal of DOM decreased the environmental risk of these biochar/PS systems and enhanced the stability of the involved biochar. With respect to the variation in degradation mechanism, the removal of DOM increased the proportion of electron transfer pathway in unison, but the diminution in the roles of O₂^•¯ and ¹O₂ was more remarkable in bone-derived-biochar/PS systems. Additionally, the toxicity test illustrated that the leakage and accumulation of DOM were toxic to Chlorella sp., and the DOM from sludge-derived-biochar presented the highest toxicity. Overall, this study analyzes the roles of DOM derived from different biochar in biochar/PS systems and evaluates their environmental risk, which contributes to a comprehensive understanding of the fate of DOM derived from biochar.

Efficient electron transfer and copper species transformation under the synergy of BiVO4 and novel Cu2(OH)3F nanosheets

Here, we report a simple and efficient strategy for evenly in situ growth of Cu₂(OH)₃F nanosheets on BiVO₄ spheres as a novel photo-Fenton-like catalyst using hydrothermal method. The Cu₂(OH)₃F/BiVO₄ composite catalysts showed great performance for the organic pollutants degradation under visible light irradiation due to the efficient electron transfer and copper species transformation. The synergetic between Cu₂(OH)₃F and BiVO₄ not only promoted the separation of electrons and holes but also enhanced the Cu²⁺ reduction, thus produced more strong oxidative radicals under a wide pH value range. The activity of Cu₂(OH)₃F/BiVO₄ composite for methylene blue degradation was 6.03 and 5.47 times more than that of pristine Cu₂(OH)₃F and BiVO₄, respectively. The composite catalysts were characterized with various methods and their stability and adaptability were also evaluated. Finally, a possible photo-Fenton-like reaction mechanism was also proposed based on the band structure/position and reaction species.

A novel Fe/Mo co-catalyzed graphene-based nanocomposite to activate peroxymonosulfate for highly efficient degradation of organic pollutants

A novel 3D α-FeOOH@MoS₂/rGO nanocomposite was successfully fabricated by a simple in situ hydrothermal method. It is a highly efficient heterogeneous catalyst in activation of peroxymonosulfate (PMS) for rapid degradation of rhodamine B (RhB), with 99.9% of RhB removed within 20 min. The introduction of rGO contributes to uniform dispersion and sufficient contact of α-FeOOH and MoS₂ nanosheets. Highly active Mo(IV) enhances the reduction of Fe(III), improves Fe(III)/Fe(II) conversion and promotes the generation of O₂1, which ensures an improved catalytic activity. MoS₂/rGO hybrid can effectively solve the problem of material reunion and make α-FeOOH exhibit excellent catalytic performance. The α-FeOOH@MoS₂-rGO/PMS system is a co-catalytic system based on the active components of α-FeOOH and MoS₂. The main reactive oxygen species in the α-FeOOH@MoS₂-rGO/PMS system are O₂1, SO₄^.- and ⋅O₂^-, which contribute to a high reactivity over a wide range of pH (5-9). Besides, this system is highly resistant to anions (Cl^-, SO₄^2-) and natural organic matter (humic acid), and can be widely used for degradation of common organic pollutants. The α-FeOOH@MoS₂/rGO is a promising Fenton-like catalyst for refractory organic wastewater treatment.

Surface oxygen vacancies and carbon dopant co-decorated magnetic ZnFe2O4 as photo-Fenton catalyst towards efficient degradation of tetracycline hydrochloride

Carbon doped strategy has been recognized as an efficient strategy to enhance photo-Fenton degradation performance. However, the preparation of high efficiency C-doped photocatalyst has been a significant challenge. Herein, we synthesized magnetic carbon-doped ZnFe₂O₄ via a facile solvothermal-calcination route. The photo-Fenton activity of C-doped ZnFe₂O₄ under visible light (λ > 420 nm) was evaluated by degradation of tetracycline hydrochloride. C-doped sample, CZF-2 (0.5 g L^-1) presented excellent removal performance for TC-HCl (20 mg L^-1) in presence of H₂O₂ (10 mM) and could remove 90.8% of TC-HCl within 50 min. The C-doping modulates crystal defects and generates surface oxygen vacancies simultaneously, thus building a new C-doping level near valence band and a defect level under the conduction band. Meanwhile, surface oxygen vacancies bring photo-generated electrons and electrons generated from itself to surface to accelerate photo-Fenton reaction, and the holes are rapidly transferred to the surface to participate in the degradation of pollutants.

Rational design of selenium inserted 1T/2H mixed-phase molybdenum disulfide for energy storage and pollutant degradation applications

MoS₂based materials are recognized as the promising candidate for multifunctional applications due to its unique physicochemical properties. But presence of lower number of active sites, poor electrical conductivity, and less stability of 2H and 1T MoS₂inherits its practical applications. Herein, we synthesized the Se inserted mixed-phase 2H/1T MoS₂nanosheets with abundant defects sites to achieve improved overall electrochemical activity. Moreover, the chalcogen insertion induces the recombination of photogenerated excitons and enhances the life of carriers. The bifunctional energy storage and photocatalytic pollutant degradation studies of the prepare materials are carried out. Fabricated symmetric solid-state supercapacitor showed an exceptional capacitance of 178 mF cm^-2with an excellent energy density of 8μWh cm^-2and power density of 137 mW cm^-2, with remarkable capacitance retention of 86.34% after successive 8000 charge-discharge cycles. The photocatalytic dye degradation experiments demonstrate that the prepared Se incorporated 1T/2H MoS₂is a promising candidate for dye degradation applications. Further, the DFT studies confirmed that the Se inserted MoS₂is a promising electrode material for supercapacitor applications with higherC_Qdue to a larger density of states near Fermi level as compared to pristine MoS₂.

Synergistic Mechanism of Photocatalysis and Photo-Fenton by Manganese Ferrite and Graphene Nanocomposite Supported on Wood Ash with Real Sunlight Irradiation

The present research aimed to evaluate the photocatalytic activity of reduced graphene oxide and manganese ferrite nanocomposite supported on eucalyptus wood ash waste (WA) from industrial boilers, for the decolorization of methylene blue (MB) solutions, using sunlight as an irradiation source. For this, the photocatalyst named MnFe2O4-G@WA was synthesized by a solvothermal method and characterized by analyzes of scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer–Emmett–Teller and zeta potential. Firstly, the photocatalyst was evaluated for photocatalytic decolorization of MB under different reaction conditions. Then, the influence of pH, photocatalyst dose and H2O2 was evaluated. MnFe2O4-G@WA showed 94% of efficiency for photocatalytic decolorization of MB under operating conditions of solar irradiation, 0.25 g/L of catalyst, 300 mg/L of H2O2. The proposed degradation reaction mechanism suggested that the photodegradation of MB was through a synergistic mechanism of photocatalysis and photo-Fenton reactions, with the combined action of the three materials used. The data adjusted to the first order kinetics from the Langmuir–Hinshelwood model. In addition, MnFe2O4-G@WA showed high stability, maintaining its efficiency above 90% after 5 cycles. The results indicated that the nanophotocatalyst is a potential technology for the decolorization of MB solutions.

Molybdenum Disulfide-Based Nanomaterials for Visible-Light-Induced Photocatalysis

Visible-light-responsive photocatalytic materials have a multitude of important applications, ranging from energy conversion and storage to industrial waste treatment. Molybdenum disulfide (MoS₂) and its variants exhibit high photocatalytic activity under irradiation by visible light as well as good stability and recyclability, which are desirable for all photocatalytic applications. MoS₂-based materials have been widely applied in various fields such as wastewater treatment, environmental remediation, and organic transformation reactions because of their excellent physicochemical properties. The present review focuses on the fundamental properties of MoS₂, recent developments and remaining challenges, and key strategies for tackling issues related to the utilization of MoS₂ in photocatalysis. The application of MoS₂-based materials in visible-light-induced catalytic reactions for the treatment of diverse kinds of pollutants including industrial, environmental, pharmaceutical, and agricultural waste are also critically discussed. The review concludes by highlighting the prospects of MoS₂ for use in various established and emerging areas of photocatalysis.

Hydroxylamine promoted Fe(III) reduction in H2O2/soil systems for phenol degradation

Production of hydroxyl radicals (•OH) upon the oxidation of solid Fe(II) by O₂ or H₂O₂ in soils and sediments has been confirmed, which benefits in situ remediation of contaminants. However, Fe(III) reduction by H₂O₂ is rate-limiting. Accelerating the Fe(III)/Fe(II) cycle could improve the efficiency of remediation. This study intended to use hydroxylamine to promote Fe(III)/Fe(II) cycle during 100 g/L soil oxidation by H₂O₂ for phenol degradation. The removal of phenol was 76% in 3 h during soil oxidation with 1 mM H₂O₂ in the presence of 1 mM hydroxylamine but was negligible in the absence of hydroxylamine. Fe(III) in the soil was reduced to 0.21 mM Fe(II) by 1 mM hydroxylamine in 30 min. The accelerated cycle of Fe(III)/Fe(II) in the soil by hydroxylamine could effectively decompose H₂O₂ to produced •OH, which was responsible for the effective enhancement of phenol degradation during soil oxidation. Under the conditions of 1 mM H₂O₂ and 100 g/L soil, the pseudo-first-order kinetic constant of phenol degradation increased proportionally from 0.0453 to 0.0844 min^-1 with the increase of hydroxylamine concentrations from 0.5 to 1 mM. The kinetic constant also increased from 0.0041 to 0.0111 min^-1 with H₂O₂ concentration increased from 0.5 to 2 mM, while it decreased from 0.0100 to 0.0051 min^-1 with soil dosage increased from 20 to 200 g/L. In addition, column experiments showed that phenol (10 mg/L) degradation ratio kept at about 48.7% with feeding 2 mM hydroxylamine and 2 mM H₂O₂ at 0.025 PV/min. Column experiments suggested an optional application of hydroxylamine and H₂O₂ for in situ remediation. The output of this study provides guidance and optional strategies to enhance contaminant degradation during soil oxidation.