Enhanced active liposomal loading of a poorly soluble ionizable drug using supersaturated drug solutions

Quantification of Unencapsulated Drug in Target Tissues Demonstrates Pharmacological Properties and Therapeutic Effects of Liposomal Topotecan (FF-10850)

PURPOSE

Quantifying unencapsulated drug concentrations in tissues is crucial for understanding the mechanisms underlying the efficacy and safety of liposomal drugs; however, the methodology for this has not been fully established. Herein, we aimed to investigate the enhanced therapeutic potential of a pegylated liposomal formulation of topotecan (FF-10850) by analyzing the concentrations of the unencapsulated drug in target tissues, to guide the improvement of its dosing regimen.

METHODS

We developed a method for measuring unencapsulated topotecan concentrations in tumor and bone marrow interstitial fluid (BM-ISF) and applied this method to pharmacokinetic assessments. The ratios of the area under the concentration-time curves (AUCs) between tumor and BM-ISF were calculated for total and unencapsulated topotecan. DNA damage and antitumor effects of FF-10850 or non-liposomal topotecan (TPT) were evaluated in an ES-2 mice xenograft model.

RESULTS

FF-10850 exhibited a much larger AUC ratio between tumor and BM-ISF for unencapsulated topotecan (2.96), but not for total topotecan (0.752), than TPT (0.833). FF-10850 promoted milder DNA damage in the bone marrow than TPT; however, FF-10850 and TPT elicited comparable DNA damage in the tumor. These findings highlight the greater tumor exposure to unencapsulated topotecan and lower bone marrow exposure to FF-10850 than TPT. The dosing regimen was successfully improved based on the kinetics of unencapsulated topotecan and DNA damage.

CONCLUSIONS

Tissue pharmacokinetics of unencapsulated topotecan elucidated the favorable pharmacological properties of FF-10850. Evaluation of tissue exposure to an unencapsulated drug with appropriate pharmacodynamic markers can be valuable in optimizing liposomal drugs and dosing regimens.

Liposomes for drug delivery: review of vesicular composition, factors affecting drug release and drug loading in liposomes

Liposomes are considered among the most versatile and advanced nanoparticle delivery systems used to target drugs to specific cells and tissues. Structurally, liposomes are sphere-like vesicles of phospholipid molecules that are surrounded by equal number of aqueous compartments. The spherical shell encapsulates an aqueous interior which contains substances such as peptides and proteins, hormones, enzymes, antibiotics, antifungal and anticancer agents. This structural property of liposomes makes it an important nano-carrier for drug delivery. Extrusion is one of the most frequently used technique for preparing monodisperse uni-lamellar liposomes as the technique is used to control vesicle size. The process involves passage of lipid suspension through polycarbonate membrane with a fixed pore size to produce vesicles with a diameter near the pore size of the membrane used in preparing them. An advantage of this technique is that there is no need to remove the organic solvent or detergent from the final preparation. This review focuses on composition of liposome formulation with special emphasis on factors affecting drug release and drug-loading.

Intra-articular treatment of temporomandibular joint osteoarthritis by injecting actively-loaded meloxicam liposomes with dual-functions of anti-inflammation and lubrication

Temporomandibular joint (TMJ) osteoarthritis is a common osteochondral degenerative disease which can severely affect patient's mouth opening and mastication. Meloxicam (MLX), one of the most widely used non-steroidal anti-inflammatory drugs, is the main clinical therapy for the treatment of TMJ osteoarthritis. However, the clinical effect is greatly compromised because of its poor water solubility and high lipophilicity. In the present study, we developed an actively-loaded liposomal formulation, namely MLX-Ca(AC)₂Lipo, using meglumine to enhance aqueous solubility and divalent metal (Ca²⁺) solution to improve encapsulation efficiency. By the formation of the nano-bowl shaped MLX-Ca precipitates inside the liposomes, MLX-Ca(AC)₂Lipo successfully achieved an optimal encapsulation efficiency as high as 98.4% compared with previous passive loading method (60.6%). Additionally, MLX-Ca(AC)₂Lipo maintained stable, and the slow drug release not only prolonged the duration of drug efficacy but also improved bioavailability. It was shown in the in vitro and in vivo tests that MLX-Ca(AC)₂Lipo downregulated the synthesis of the inflammatory factors (such as prostaglandin-E2) and as a consequence reduced chondrocytes apoptosis and extracellular matrix degeneration. Furthermore, the intra-articular injection of MLX-Ca(AC)₂Lipo enhanced bioinspired lubrication of TMJ, protecting the cartilage from progressive wear. In summary, MLX-Ca(AC)₂Lipo with dual-functions of anti-inflammation and lubrication is a promising nanomedicine for the treatment of TMJ osteoarthritis by intra-articular injection.

Calcium Enabled Remote Loading of a Weak Acid Into pH-sensitive Liposomes and Augmented Cytosolic Delivery to Cancer Cells via the Proton Sponge Effect

While delivery of chemotherapeutics to cancer cells by nanomedicines can improve therapeutic outcomes, many fail due to the low drug loading (DL), poor cellular uptake and endosomal entrapment. This study investigated the potential to overcome these limitations using pH-sensitive liposomes (PSL) empowered by the use of calcium acetate. An acidic dinitrobenzamide mustard prodrug SN25860 was used as a model drug, with non pH-sensitive liposomes (NPSL) as a reference. Calcium acetate as a remote loading agent allowed to engineer PSL- and NPSL-SN25860 with DL of > 31.1% (w/w). The IC₅₀ of PSL-SN25860 was 21- and 141-fold lower than NPSL and free drug, respectively. At 48 h following injection of PSL-SN25860, NPSL-SN25860 and the free drug, drug concentrations in EMT6-nfsB murine breast tumors were 56.3 µg/g, 6.76 µg/g and undetectable (< 0.015 µg/g), respectively (n = 3). Meanwhile, the ex vivo tumor clonogenic assay showed 9.1%, 19.4% and 42.7% cell survival in the respective tumors. Live-cell imaging and co-localization analysis suggested endosomal escape was accomplished by destabilization of PSL followed by release of Ca²⁺ in endosomes allowing induction of a proton sponge effect. Subsequent endosomal rupture was observed approximately 30 min following endocytosis of PSL containing Ca²⁺. Additionally, calcium in liposomes promoted internalization of both PSL and NPSL. Taken together, this study demonstrated multifaceted functions of calcium acetate in promoting drug loading into liposomes, cellular uptake, and endosomal escape of PSL for efficient cytoplasmic drug delivery. The results shed light on designing nano-platforms for cytoplasmic delivery of various therapeutics.

Liposomal PHD2 Inhibitors and the Enhanced Efficacy in Stabilizing HIF-1α

Prolyl hydroxylase domain-containing protein 2 (PHD2) inhibition, which stabilizes hypoxia-inducible factor (HIF)-1α and thus triggers adaptation responses to hypoxia in cells, has become an important therapeutic target. Despite the proven high potency, small-molecule PHD2 inhibitors such as IOX2 may require a nanoformulation for favorable biodistribution to reduce off-target toxicity. A liposome formulation for improving the pharmacokinetics of an encapsulated drug while allowing a targeted delivery is a viable option. This study aimed to develop an efficient loading method that can encapsulate IOX2 and other PHD2 inhibitors with similar pharmacophore features in nanosized liposomes. Driven by a transmembrane calcium acetate gradient, a nearly 100% remote loading efficiency of IOX2 into liposomes was achieved with an optimized extraliposomal solution. The electron microscopy imaging revealed that IOX2 formed nanoprecipitates inside the liposome’s interior compartments after loading. For drug efficacy, liposomal IOX2 outperformed the free drug in inducing the HIF-1α levels in cell experiments, especially when using a targeting ligand. This method also enabled two clinically used inhibitors—vadadustat and roxadustat—to be loaded into liposomes with a high encapsulation efficiency, indicating its generality to load other heterocyclic glycinamide PHD2 inhibitors. We believe that the liposome formulation of PHD2 inhibitors, particularly in conjunction with active targeting, would have therapeutic potential for treating more specifically localized disease lesions.

Red blood cells: The metamorphosis of a neglected carrier into the natural mothership for artificial nanocarriers

Drug delivery research pursues many types of carriers including proteins and other macromolecules, natural and synthetic polymeric structures, nanocarriers of diverse compositions and cells. In particular, liposomes and lipid nanoparticles represent arguably the most advanced and popular human-made nanocarriers, already in multiple clinical applications. On the other hand, red blood cells (RBCs) represent attractive natural carriers for the vascular route, featuring at least two distinct compartments for loading pharmacological cargoes, namely inner space enclosed by the plasma membrane and the outer surface of this membrane. Historically, studies of liposomal drug delivery systems (DDS) astronomically outnumbered and surpassed the RBC-based DDS. Nevertheless, these two types of carriers have different profile of advantages and disadvantages. Recent studies showed that RBC-based drug carriers indeed may feature unique pharmacokinetic and biodistribution characteristics favorably changing benefit/risk ratio of some cargo agents. Furthermore, RBC carriage cardinally alters behavior and effect of nanocarriers in the bloodstream, so called RBC hitchhiking (RBC-HH). This article represents an attempt for the comparative analysis of liposomal vs RBC drug delivery, culminating with design of hybrid DDSs enabling mutual collaborative advantages such as RBC-HH and camouflaging nanoparticles by RBC membrane. Finally, we discuss the key current challenges faced by these and other RBC-based DDSs including the issue of potential unintended and adverse effect and contingency measures to ameliorate this and other concerns.

Asymmetric flow field-flow fractionation (AF4) with fluorescence and multi-detector analysis for direct, real-time, size-resolved measurements of drug release from polymeric nanoparticles

Polymeric nanoparticles (NPs) are typically designed to enhance the efficiency of drug delivery by controlling the drug release rate. Hence, it is critical to obtain an accurate drug release profile. This study presents the first application of asymmetric flow field-flow fractionation (AF4) with fluorescence detection (FLD) to quantify release profiles of fluorescent drugs from polymeric NPs, specifically poly(lactic-co-glycolic acid) NPs loaded with enrofloxacin (PLGA-Enro NPs). In contrast to conventional measurements requiring separation of the NPs and dissolved drugs (typically by dialysis) prior to quantification, AF4 provides in situ removal of unincorporated drugs, while the judicious combination of online FLD and UV detection selectively provides the entrapped drug and PLGA NP concentrations, respectively, and hence the drug loading. NP size and shape factors are simultaneously obtained by online dynamic and multi-angle light scattering (DLS, MALS) detectors. The AF4 and dialysis approaches were compared to evaluate drug release from PLGA-Enro NPs containing a high proportion (≈ 94%) of unincorporated (burst release) drug at three temperatures spanning the glass transition temperature (T_g ≈ 33 °C) of the NPs. The AF4 method clearly captured the temperature dependence of the drug release relative to T_g (from no release at 20 °C to rapid release at 37 °C). In contrast, dialysis was not able to distinguish differences in the extent or rate of release of the entrapped drug because of interferences from the burst release, as well as the dialysis lag time, as supported through a diffusion model and validation experiments on purified NPs with low burst release. Finally, the multi-detector AF4 analysis yielded unique size-dependent release profiles across the entire NP size distribution, with smaller NPs showing faster release consistent with radial diffusion from the NPs. Overall, this study demonstrates the novel application and advantages of multi-detector AF4 methods, particularly AF4-FLD, to obtain direct, size-resolved release profiles of fluorescent drugs from polymeric NPs.

Loading drugs into liposomes by temperature up-down cycle procedure with controllable results fitting prediction by mathematical and thermodynamic process

Liposomes are a useful carrier for delivering drugs but rarely make a poorly water-soluble drug (PWSD) realize its therapeutic potential. A key barrier lies in that, by conventional methods, PWSD is mainly loaded just in liposome bilayer membranes, which rarely provide sufficient room to accommodate drugs satisfying clinical therapy. In this investigation, a novel procedure of temperature up-down cycle (TUDC) was developed for loading PWSDs into the liposome interiors instead of bilayer membranes to hold enough agents. In particular, the TUDC procedure renders PWSDs such as curcumin (Cur) entrapment purposely controllable, as evidenced by the encapsulation efficiency (EE) of Cur varies nearly from 0% to 100% in response to changes the determinant factors of the procedure. In addition, several mathematical equations that could calculate the loading efficiency by TUDC were established and proved, when combined with thermodynamic process, able to successfully predict the loading results through including thermodynamic parameters, such as temperature and deduced drug solubility, thus remarkably cutting down the laborious experiments and enhancing liposome development efficiency. Cryo-TEM, SAXS, XRD and DSC tests proved that TUDC is feasible to load a PWSD into PEG-liposomes but rendering the drug in the amorphous state. Thus, the novel TUDC procedure and the established mathematical and thermodynamic process may provide a useful tool to promote the development of liposome products.

Prevention of infection caused by enteropathogenic E. coli O157:H7 in intestinal cells using enrofloxacin entrapped in polymer based nanocarriers

Poor bioavailability of antibiotics, toxicity, and development of antibiotic-resistant bacteria jeopardize antibiotic treatments. To circumvent these issues, drug delivery using nanocarriers are highlighted to secure the future of antibiotic treatments. This work investigated application of nanocarriers, to prevent and treat bacterial infection, presenting minimal toxicity to the IPEC-J2 cell line. To accomplish this, polymer-based nanoparticles (NPs) of poly(lactide-co-glycolide) (PLGA) and lignin-graft-PLGA (LNP) loaded with enrofloxacin (ENFLX) were synthesized, yielding spherical particles with average sizes of 111.8 ± 0.6 nm (PLGA) and 117.4 ± 0.9 nm (LNP). The releases of ENFLX from PLGA and LNP were modeled by a theoretical diffusion model considering both the NP and dialysis diffusion barriers for drug release. Biocompatible concentrations of ENFLX, enrofloxacin loaded PLGA(Enflx) and LNP(Enflx) were determined based on examination of bacterial inhibition, toxicity, and ROS generation. Biocompatible concentrations were used for treatment of higher- and lower-level infections in IPEC-J2 cells. Prevention of bacterial infection by LNP(Enflx) was enhanced more than 50% compared to ENFLX at lower-level infection. At higher-level infection, PLGA(Enflx) and LNP(Enflx) demonstrated 25% higher prevention of bacteria growth compared to ENFLX alone. The superior treatment achieved by the nanocarried drug is accredited to particle uptake by endocytosis and slow release of the drug intracellularly, preventing rapid bacterial growth inside the cells.

Angiopep-2-modified calcium arsenite-loaded liposomes for targeted and pH-responsive delivery for anti-glioma therapy

The blood-brain barrier (BBB) is the most critical obstacle in the treatment of central nervous system disorders, such as glioma, the most typical type of brain tumor. To overcome the BBB and enhance drug-penetration abilities, we used angiopep-2-modified liposomes to deliver arsenic trioxide (ATO) across the BBB, targeting the glioma. Angiopep-2-modified calcium arsenite-loaded liposomes (A2-PEG-LP@CaAs), with uniformly distributed hydrodynamic diameter (96.75 ± 0.57 nm), were prepared using the acetate gradient method with high drug-loading capacity (7.13 ± 0.72%) and entrapment efficiency (54.30 ± 9.81%). In the acid tumor microenvironment, arsenic was responsively released, thereby exerting an anti-glioma effect. The anti-glioma effect of A2-PEG-LP@CaAs was investigated both in vitro and in vivo. As a result, A2-PEG-LP@CaAs exhibited a potent, targeted anti-glioma effect mediated by the lipoprotein receptor-related (LRP) receptor, which is overexpressed in both the BBB and glioma. Therefore, A2-PEG-LP@CaAs could dramatically promote the anti-glioma effect of ATO, as a promising strategy for glioma therapy.

Self-assembly delivery system based on small-molecule camptothecin prodrug for treatment of colorectal carcinoma

The aim of this study was to prepare small-molecule camptothecin (CPT) prodrugs and evaluate their effectiveness in colorectal carcinoma therapy. Prodrug nanoparticles (NPs) were physicochemically characterized and evaluated for their cytotoxicity in human colon cancer (HCT116) cell lines. The antitumor efficacy of the NPs was evaluated in HCT116 tumor-bearing mice. The prepared NPs exhibited high drug loading capacity (32% of CPT w/w) and also kept a high active lactone fraction of CPT (>85%) during circulation. The NPs were internalized into tumor cells efficiently compared with free drug and significantly enhanced the drug's therapeutic efficacy. The developed small-molecule CPT prodrug NPs could be a promising strategy in the clinical therapy of colorectal carcinoma.

Rhodotorula glutinis as a living cell liposome to deliver polypeptide drugs in vivo

The potential advantages of recombinant microbes as oral drug carriers for curing diseases have attracted much attention. The use of recombinant oil microbes as living cell liposomes to carry polypeptide drugs may be an ideal polypeptide oral drug delivery system. GM4-ΔTS was constructed by LFH-PCR from Rhodotorula glutinis GM4, which was screened and preserved in our laboratory, and then transferred into choline-phosphate cytidylyltransferase (CCT), which is a rate-limiting enzyme for lecithin synthesis. The results showed that the CCT gene was highly expressed in the GM4-ΔTS strain and could significantly increase fatty acid and lecithin contents in GM4-ΔTS-PGK1-CCT. Moreover, insulin, H22-LP, and α-MSH were successfully introduced into cells in vitro, and the strain no longer proliferated in vivo, for safe and controllable polypeptide drug delivery. In vivo, normal mice were intragastrically administered with recombinant strains carrying insulin and α-MSH, and different levels of polypeptide drugs were detected in serum and tissue, respectively. Then, recombinant strains carrying insulin were administered to type II diabetes mellitus mice. The results showed that the strains could effectively reduce blood glucose levels in mice, which indicated that the recombinant strains could carry insulin into the body, and the drug effect was remarkable. Therefore, recombinant GM4-ΔTS-PGK1-CCT strains were successfully used as living cell liposomes to carry insulin, H22-LP, and α-MSH peptides into the body for the first time; additionally, these strains have enhanced safety, controllability, and efficacy.

G, Masters AR, Abdel-Aleem JA, Abdelrahman SI, Abdelrahman AA, Lyle LT, Yeo Y. Development of Liposomal Gemcitabine with High Drug Loading Capacity

Liposomes are widely used for systemic delivery of chemotherapeutic agents to reduce their nonspecific side effects. Gemcitabine (Gem) makes a great candidate for liposomal encapsulation due to the short half-life and nonspecific side effects; however, it has been difficult to achieve liposomal Gem with high drug loading capacity. Remote loading, which uses a transmembrane pH gradient to induce an influx of drug and locks the drug in the core as a sulfate complex, does not serve Gem as efficiently as doxorubicin (Dox) due to the low p Ka value of Gem. Existing studies have attempted to improve Gem loading capacity in liposomes by employing lipophilic Gem derivatives or creating a high-concentration gradient for active loading into the hydrophilic cores (small volume loading). In this study, we combine the remote loading approach and small volume loading or hypertonic loading, a new approach to induce the influx of Gem into the preformed liposomes by high osmotic pressure, to achieve a Gem loading capacity of 9.4-10.3 wt % in contrast to 0.14-3.8 wt % of the conventional methods. Liposomal Gem showed a good stability during storage, sustained-release over 120 h in vitro, enhanced cellular uptake, and improved cytotoxicity as compared to free Gem. Liposomal Gem showed a synergistic effect with liposomal Dox on Huh7 hepatocellular carcinoma cells. A mixture of liposomal Gem and liposomal Dox delivered both drugs to the tumor more efficiently than a free drug mixture and showed a relatively good anti-tumor effect in a xenograft model of hepatocellular carcinoma. This study shows that bioactive liposomal Gem with high drug loading capacity can be produced by remote loading combined with additional approaches to increase drug influx into the liposomes.

Preparation and Evaluation of Liposomes Co-Loaded with Doxorubicin, Phospholipase D Inhibitor 5-Fluoro-2-Indolyl Deschlorohalopemide (FIPI) and D-Alpha Tocopheryl Acid Succinate (α-TOS) for Anti-Metastasis

Tumor metastasis has become a key obstacle to cancer treatment, which causes high mortality. Nowadays, it involves multiple complex pathways, and conventional treatments are not effective due to fewer targets. The aims of the present study were to construct a novel liposome delivery system co-loading a specific PLD inhibitor 5-fluoro-2-indolyldes-chlorohalopemide (FIPI) in combination with antitumor drug doxorubicin (DOX) and functional excipient D-alpha tocopheryl acid succinate (α-TOS) for anti-metastasis. In this study, the liposomes containing three components (DFT-Lip) with different physicochemical properties were successfully prepared by film dispersion method combined with pH-gradient method. Physicochemical parameters such as particles size, potential, encapsulation efficiency, stability, and release profiles were investigated. In vitro and in vivo anti-metastasis effectiveness against highly metastatic breast cancer MDA-MB-231 cell line was evaluated. The liposomes showed uniform particle size (approximately 119 nm), high drug encapsulation efficiency (> 90%), slow release characteristics and stability. In vitro anti-tumor cell metastasis study demonstrated DFT-Lip could greatly inhibit motility, migration and invasion of MDA-MB-231 cells compared to other liposomes, predicting a synergistic anti-tumor metastasis effect between FIPI with α-TOS in liposomes. In vivo anti-metastasis study showed that DFT-Lip prevented the initiation and the progression of metastasis of high metastatic breast cancer. These results suggested that the liposomes containing DOX, FIPI, and α-TOS might be a promising strategy for metastatic tumor therapy in clinics.

Stabilizing supersaturated drug-delivery system through mechanism of nucleation and crystal growth inhibition of drugs

A supersaturated drug-delivery system is capable of enhancing oral bioavailability of hydrophobic drugs. Maintenance of the supersaturated system both in vitro and in vivo is one of the most challenging parts, for that it is required to keenly understand the nucleation and crystal growth behavior. Polymers are widely used to stabilize supersaturated solutions; screening of polymers is done on the basis of their interaction with drug. Nucleation and crystal growth inhibition and drug–polymer interactions can be investigated by using various spectroscopic methods. Various formulations are prepared as supersaturated systems using different drug-delivery systems utilizing different polymers, which illustrates that supersaturation is worthwhile to increase the solubility and hence oral bioavailability of poorly soluble drugs.

Effect of structural factors on release profiles of camptothecin from block copolymer conjugates with high load of drug

The aim of the present work was the synthesis and study the kinetics and profiles of camptothecin (CPT) release form block co- and ter-polymer conjugates comprising polylactide (PLA) segments and CPT moieties, structurally diverse by degrees of branching, content of d-PLA units and poly(ethylene glycol) methyl ether methacrylate (PEGMA). Six PLA, non-toxic macroinitiators (MIs), terminated with α-bromoester were synthesized. MIs were subjected to polymerization of CPT methacrylic derivative (CPTMA) with PEGMA at various ratios. The average contents of CPT from elemental analysis, NMR and UV-GPC were approximate to each other. The number of CPT molecules and PEGMA units was in the range of 9-195 and 0-280 per conjugate, respectively. PEGMA units plasticized PLA causing increase of its crystallinity, whereas 7% and more of d-PLA caused material amorphous. PEGMA units decreased thermal stability of conjugates, however it compatibillized the separated phases of PLA and PCPTMA, based on AFM. In vitro release rate of CPT from linear PLA conjugates deposited on injection-molded PLA bars increased by introduction of PEGMA units with zero-order kinetics and Korsmeyer-Peppas model indicating the super case II transport. Branched conjugates revealed some burst release and then the release was rather of first-order-kinetics with respect to CPT with non-Fickian transport.

Point of use production of liposomal solubilised products

With the progression towards personalised and age-appropriate medicines, the production of drug loaded liposomes at the point of care would be highly desirable. In particular, liposomal solubilisation agents that can be produced rapidly and easily would provide a new option in personalised medicines. Such a process could also be used as a rapid tool for the formulation and pre-clinical screening of low soluble drugs. Within this paper, we outline a novel easy-to-use production method for point of use production of liposome solubilised drugs. Our results demonstrate that pre-formed multilamellar liposomes, stored in a fresh or frozen format, can be bilayer loaded with low solubility drugs using a simple bath sonication process. Sonication is undertaken in a sealed vial allowing the contents to remain sterile. Liposomes around 100 nm were prepared and these liposomes were able to increase the amount of drug dissolved by up to 10 fold. These liposomal solubilisation agents were stable in terms of size and drug solubilisation for up to 8 days when stored in the fridge making them an easy to use and robust small-scale tool for drug solubilisation.

Silicon-containing analogs of camptothecin as anticancer agents

The plant pentacyclic alkaloid camptothecin and its structural analogs were extensively studied. These compounds are interesting due to the antitumor activity associated with their ability to inhibit topoisomerase I in tumor cells. During the last decades of the 20th century, a large number of the silicon-containing camptothecins (silatecans) were synthesized. 7-tert-Butyldimethylsilyl-10-hydroxy-camptothecin (DB-67 or AR-67) has enhanced lipophilicity and demonstrates a antitumor activity superior to its carbon analog. To date, certain silatecans are under clinical trials and their ultimate role in cancer therapy appears promising. In this review, we present chemical methodologies for the synthesis of silicon-containing camptothecins, their chemical properties, biological activity, and results of clinical trials.

New drug candidates for liposomal delivery identified by computer modeling of liposomes' remote loading and leakage

Remote drug loading into nano-liposomes is in most cases the best method for achieving high concentrations of active pharmaceutical ingredients (API) per nano-liposome that enable therapeutically viable API-loaded nano-liposomes, referred to as nano-drugs. This approach also enables controlled drug release. Recently, we constructed computational models to identify APIs that can achieve the desired high concentrations in nano-liposomes by remote loading. While those previous models included a broad spectrum of experimental conditions and dealt only with loading, here we reduced the scope to the molecular characteristics alone. We model and predict API suitability for nano-liposomal delivery by fixing the main experimental conditions: liposome lipid composition and size to be similar to those of Doxil® liposomes. On that basis, we add a prediction of drug leakage from the nano-liposomes during storage. The latter is critical for having pharmaceutically viable nano-drugs. The "load and leak" models were used to screen two large molecular databases in search of candidate APIs for delivery by nano-liposomes. The distribution of positive instances in both loading and leakage models was similar in the two databases screened. The screening process identified 667 molecules that were positives by both loading and leakage models (i.e., both high-loading and stable). Among them, 318 molecules received a high score in both properties and of these, 67 are FDA-approved drugs. This group of molecules, having diverse pharmacological activities, may be the basis for future liposomal drug development.

Liposomal Delivery Systems: Design Optimization and Current Applications

The liposome, a closed phospholipid bilayered vesicular system, has received considerable attention as a pharmaceutical carrier of great potential over the past 30 years. The ability of liposomes to encapsulate both hydrophilic and hydrophobic drugs, coupled with their biocompatibility and biodegradability, make liposomes attractive vehicles in the field of drug delivery. In addition, great technical advances such as remote drug loading, triggered release liposomes, ligand-targeted liposomes, liposomes containing combinations of drugs, and so on, have led to the widespread use of liposomes in diverse areas as delivery vehicles for anti-cancer, bio-active molecules, diagnostics, and therapeutic agents. In this review, we summarize design optimization of liposomal systems and invaluable applications of liposomes as effective delivery systems.

Ion-Pairing Contribution to the Liposomal Transport of Topotecan as Revealed by Mechanistic Modeling

Actively loaded liposomal formulations of anticancer agents have been widely explored due to their high drug encapsulation efficiencies and prolonged drug retention. Mathematical models to predict and optimize drug loading and release kinetics from these nanoparticle formulations would be useful in their development and may allow researchers to tune release profiles. Such models must account for the driving forces as influenced by the physicochemical properties of the drug and the microenvironment, and the liposomal barrier properties. This study employed mechanistic modeling to describe the active liposomal loading and release kinetics of the anticancer agent topotecan (TPT). The model incorporates ammonia transport resulting in generation of a pH gradient, TPT dimerization, TPT lactone ring-opening and -closing interconversion kinetics, chloride transport, and transport of TPT-chloride ion-pairs to describe the active loading and release kinetics of TPT in the presence of varying chloride concentrations. Model-based predictions of the kinetics of active loading at varying loading concentrations of TPT and release under dynamic dialysis conditions were in reasonable agreement with experiments. These findings identify key attributes to consider in optimizing and predicting loading and release of liposomal TPT that may also be applicable to liposomal formulations of other weakly basic pharmaceuticals.

IN VITRO RELEASE KINETICS MODEL FITTING OF LIPOSOMES: AN INSIGHT

Liposomes are emerging cargoes for bioactive delivery owing to their widely accepted biocompatible and biodegradable nature. It is always a challenge to control the release of payload for effective delivery to the site of interest. Over the couple of decennia, mathematical modeling of release process is a need of time whether the drug remains in the circulation or reaches at the target site. For establishing a better in vitro - in vivo correlation, release kinetics models viz. Peppas, Higuchi, Weibull, Zero Order and First order including mechanistic models like All-or-None, Toroidal, and Biomembrane models etc. are continuously exploited to predict drug release profile. Most of these models rely on the diffusion equations based on the composition of liposomes and conditions of release. Here, we summarized the crucial reports exploring these models and associated interventions to know the underlying physicochemical release phenomenon. Such mathematical model fitting can be a promising approach to deduce release/delivery process to help in designing the safe and efficacious ("Smart") liposomes.

A Simple and Improved Active Loading Method to Efficiently Encapsulate Staurosporine into Lipid-Based Nanoparticles for Enhanced Therapy of Multidrug Resistant Cancer

PURPOSE

This study was aimed at developing a new active loading method to stably encapsulate staurosporine (STS), a water insoluble drug, into lipid-based nanoparticles (LNPs) for drug targeting to tumors.

METHODS

A limited amount of DMSO was included during the active loading process to prevent precipitation and facilitate the loading of insoluble STS into the aqueous core of a LNP. The drug loading kinetics under various conditions was studied and the STS-LNPs were characterized by size, drug-to-lipid ratio, drug release kinetics and in vitro potency. The antitumor efficacy of the STS-LNPs was compared with free STS in a mouse model.

RESULTS

The drug loading efficiency reached 100% within 15 min of incubation at a drug-to-lipid ratio of 0.31 (mol) via an ammonium gradient. STS formed nano-aggregates inside the aqueous core of the LNPs and was stably retained upon storage and in the presence of serum. A 3-fold higher dose of the STS-LNPs could be tolerated by BALB/c mice compared with free STS, leading to nearly complete growth inhibition of a multidrug resistant breast tumor, while free STS only exhibited moderate activity.

CONCLUSION

This simple and efficient drug loading method produced a stable LNP formulation for STS that was effective for cancer treatment.

Mechanistic model and analysis of doxorubicin release from liposomal formulations

Reliable and predictive models of drug release kinetics in vitro and in vivo are still lacking for liposomal formulations. Developing robust, predictive release models requires systematic, quantitative characterization of these complex drug delivery systems with respect to the physicochemical properties governing the driving force for release. These models must also incorporate changes in release due to the dissolution media and methods employed to monitor release. This paper demonstrates the successful development and application of a mathematical mechanistic model capable of predicting doxorubicin (DXR) release kinetics from liposomal formulations resembling the FDA-approved nanoformulation DOXIL® using dynamic dialysis. The model accounts for DXR equilibria (e.g. self-association, precipitation, ionization), the change in intravesicular pH due to ammonia release, and dialysis membrane transport of DXR. The model was tested using a Box-Behnken experimental design in which release conditions including extravesicular pH, ammonia concentration in the release medium, and the dilution of the formulation (i.e. suspension concentration) were varied. Mechanistic model predictions agreed with observed DXR release up to 19h. The predictions were similar to a computer fit of the release data using an empirical model often employed for analyzing data generated from this type of experimental design. Unlike the empirical model, the mechanistic model was also able to provide reasonable predictions of release outside the tested design space. These results illustrate the usefulness of mechanistic modeling to predict drug release from liposomal formulations in vitro and its potential for future development of in vitro - in vivo correlations for complex nanoformulations.

The self-assembling camptothecin-tocopherol prodrug: An effective approach for formulating camptothecin

Camptothecin (CPT) is a potent antitumor agent and functions via inhibiting the activity of topoisomerase I during DNA replication. However, the clinical application of CPT has been greatly hindered by its extremely poor solubility, the instability of its active lactone ring in blood stream, as well as the non-specific toxicity to normal tissues. In addition, most of the formulations developed so far are not applicable for formulating CPT. In this study, two novel CPT prodrugs were developed by conjugating CPT to α-tocopherol via a carbonate ester bond (CPT-VE) or disulfide linkage (CPT-S-S-VE). Both CPT prodrugs were able to self-assemble into nanofibers with the facilitation of a PEG5K-Fmoc-VE2-based nanomicellar carrier. Both prodrug nanoassemblies exhibited excellent stability. Fluorescence quenching, UV absorbance, and FT-IR studies demonstrated strong interactions between carrier and prodrugs, including hydrophobic interaction, π-π stacking, as well as hydrogen bonding. NMR studies suggested that prodrugs were successfully incorporated into PEG5K-Fmoc-VE2 during self-assembly process. In vitro, PEG5K-Fmoc-VE2/CPT-S-S-VE presented significantly higher level of cytotoxicity on tumor cells compared to PEG5K-Fmoc-VE2/CPT-VE. Biodistribution study showed that CPT-S-S-VE formulated in PEG5K-Fmoc-VE2 micelles was effectively converted to parent CPT following delivery to tumor tissues. Finally, PEG5K-Fmoc-VE2/CPT-S-S-VE nanofibers showed superior tumor growth inhibition in an aggressive murine breast cancer model (4T1.2).

Post-insertion of poloxamer 188 strengthened liposomal membrane and reduced drug irritancy and in vivo precipitation, superior to PEGylation

The ultimate aim of this study was to develop asulacrine (ASL)-loaded long-circulating liposomes to prevent phlebitis during intravenous (i.v.) infusion for chemotherapy. Poly(ethylene)glycol (PEG) and poloxamer 188-modified liposomes (ASL-PEGL and ASL-P188L) were developed, and ASL was loaded using a remote loading method facilitated with a low concentration of sulfobutyl ether-β-cyclodextrin as a drug solubilizer. The liposomes were characterized in terms of morphology, size, release properties and stability. Pharmacokinetics and venous tissue tolerance of the formulations were simultaneously studied in rabbits following one-hour i.v. infusion via the ear vein. The irritancy was assessed using a rat paw-lift/lick model after subplantar injections. High drug loading 9.0% w/w was achieved with no drug leakage found from ASL-PEGL or ASL-P188L suspended in a 5% glucose solution at 30days. However, a rapid release (leakage) from ASL-PEGL was observed when PBS was used as release medium, partially related to the use of cyclodextrin in drug loading. Post-insertion of poloxamer 188 to the liposomes appeared to be able to restore the drug retention possibly by increasing the packing density of phospholipids in the membrane. In rabbits (n=5), ASL-P188L had a prolonged half-life with no drug precipitation or inflammation in the rabbit ear vein in contrast to ASL solution. Following subplantar (footpad) injections in rats ASL solution induced paw-lick/lift responses in all rats whereas ASL-P188L caused no response (n=8). PEGylation showed less benefit possibly due to the drug 'leakage'. In conclusion, drug precipitation in the vein and the drug mild irritancy may both contribute to the occurrence of phlebitis caused by the ASL solution, and could both be prevented by encapsulation of the drug in liposomes. Poloxamer 188 appeared to be able to 'seal' the liposomal membrane and enhance drug retention. The study also highlighted the importance of bio-relevant in vitro release study in formulation screening.

Insights into accelerated liposomal release of topotecan in plasma monitored by a non-invasive fluorescence spectroscopic method

A non-invasive fluorescence method was developed to monitor liposomal release kinetics of the anticancer agent topotecan (TPT) in physiological fluids and subsequently used to explore the cause of accelerated release in plasma. Analyses of fluorescence excitation spectra confirmed that unencapsulated TPT exhibits a red shift in its spectrum as pH is increased. This property was used to monitor TPT release from actively loaded liposomal formulations having a low intravesicular pH. Mathematical release models were developed to extract reliable rate constants for TPT release in aqueous solutions monitored by fluorescence and release kinetics obtained by HPLC. Using the fluorescence method, accelerated TPT release was observed in plasma as previously reported in the literature. Simulations to estimate the intravesicular pH were conducted to demonstrate that accelerated release correlated with alterations in the low intravesicular pH. This was attributed to the presence of ammonia in plasma samples rather than proteins and other plasma components generally believed to alter release kinetics in physiological samples. These findings shed light on the critical role that ammonia may play in contributing to the preclinical/clinical variability and performance seen with actively-loaded liposomal formulations of TPT and other weakly-basic anticancer agents.

Supramolecular anticancer drug delivery systems based on linear–dendritic copolymers

The combination of two generations of polymers as linear–dendritic copolymers leads to hybrid systems with unique properties, which are of great interest for many applications. Herein, recent advances in anticancer drug delivery systems based on linear–dendritic copolymers have been reviewed.

Strategies to maximize liposomal drug loading for a poorly water-soluble anticancer drug

PURPOSE

To develop a liposomal system with high drug loading (DL) for intravenous (i.v.) delivery of a poorly water-soluble basic drug, asulacrine (ASL).

METHODS

A thin-film hydration and extrusion method was used to fabricate the PEGylated liposomal membranes followed by a freeze and thaw process. A novel active drug loading method was developed using ammonium sulphate gradient as an influx driving force of ASL solubilized with sulfobutyl ether-β-cyclodextrin (SBE-β-CD). DL was maximized by optimizing liposomal preparation and loading conditions. Pharmacokinetics was evaluated following i.v. infusion in rabbits.

RESULTS

Freeze-thaw resulted in unilamellar liposome formation (180 nm) free of micelles. Higher DL was obtained when dialysis was used to remove the untrapped ammonium sulphate compared to ultracentrifuge. The pH and SBE-β-CD level in the loading solution played key roles in enhancing DL. High DL ASL-liposomes (8.9%w/w, drug-to-lipid mole ratio 26%) were obtained with some drug "bundles" in the liposomal cores and were stable in a 5% glucose solution for >80 days with minimal leakage (<2%). Surprisingly, following administration of ASL-liposomes prepared with or without SBE-β-CD, the half-lives were similar to the drug solution despite an increased area under the curve, indicating drug leakage from the carriers.

CONCLUSIONS

High liposomal DL was achieved with multiple strategies for a poorly-water soluble weak base. However, the liposomal permeability needed to be tailored to improve drug retention.

Preparation of camptothecin-loaded targeting nanoparticles and their antitumor effects on hepatocellular carcinoma cell line H22

Camptothecin (CPT) is an effective anticancer agent against various cancers but the clinical application is limited because of its poor water solubility, low bioavailability and severe toxic side effects. The aim of the present study was to evaluate the feasibility of using targeted NPs as a high-performance CPT delivery system that targets liver cancer cells through intravenous (i.v.) administration route. CPT was incorporated into biotin-F127-PLA or F127-PLA polymeric nanoparticles (NPs) by a dialysis method. The preparation of the targeting NPs was performed by conjugating biotin-F127-PLA NPs with anti-3A5 antibody. The antitumor effect of the CPT-loaded nanoparticles against H22 cells in vitro was determined using an MTT assay. Tissue distribution and tumor inhibition in vivo were also evaluated. Survivin mRNA expression was assessed by real-time polymerase chain reaction. Results showed that the targeted CPT NPs exhibited regular spherical shapes with a mean diameter of approximately 180 nm. In vitro release of the targeted CPT NPs exhibited an initial burst (40%) within 12 h, followed by a slow release. Cytotoxicity test against H22 cells indicated that the targeted CPT NPs exerted significant antitumor effects. Compared with free CPT and non-targeted CPT NPs, the targeted CPT NPs showed superior inhibition ratio against tumor in vivo, which may be associated with reduced survivin mRNA expression. The results suggested that the new targeted CPT NPs may be a promising injectable delivery system for cancer therapy.

Physicochemical characterization of asulacrine towards the development of an anticancer liposomal formulation via active drug loading: stability, solubility, lipophilicity and ionization

To facilitate the development of a liposomal formulation for cancer therapy, the physicochemical properties of asulacrine (ASL), an anticancer drug candidate, were characterized. Nano-liposomes were prepared by thin-film hydration in conjugation with active drug loading using ammonium sulphate and post-insertion with Poloxamer 188. A stability-indicating HPLC assay with diode array detection was developed for the determination of ASL concentrations. The U-shaped pH-solubility profile in aqueous solutions, with a lowest solubility at pH 7.4 (0.843 μg/mL), indicated that ASL is an ampholyte, and dilution or neutralization of acidic drug solutions used in clinical trials with physiological fluids may cause drug precipitation. The basic pKa value measured by absorbance spectroscopy was 6.72. The logD value at pH 3.8 was 1.15 which increased to 3.24 as pH increased to 7.4. ASL was found to be the most stable in acidic conditions and degraded most rapidly in alkaline conditions. An extra-liposomal pH of 5.6 during drug loading was found to be optimal to achieve the highest drug loading (DL) of 4.76% and entrapment efficiency (EE) of 99.9%. At this pH, >90% of ASL was ionized conferring high drug solubility (1mg/mL) and acted as a reservoir of unionized ASL to be transported into liposomal cores. As a suspension the optimized liposomes showed great physicochemical stability for five months at 4°C. In summary, the obtained physicochemical parameters provided insightful information useful to maximise DL into the liposomes, and explain a tendency of drug precipitation of pH-solubilized formulations following intravenous infusion.

Dynamic, nonsink method for the simultaneous determination of drug permeability and binding coefficients in liposomes

Drug release from liposomal formulations is governed by a complex interplay of kinetic (i.e., drug permeability) and thermodynamic factors (i.e., drug partitioning to the bilayer surface). Release studies under sink conditions that attempt to mimic physiological conditions are insufficient to decipher these separate contributions. The present study explores release studies performed under nonsink conditions coupled with appropriate mathematical models to describe both the release kinetics and the conditions in which equilibrium is established. Liposomal release profiles for a model anticancer agent, topotecan, under nonsink conditions provided values for both the first-order rate constant for drug release and the bilayer/water partition coefficient. These findings were validated by conducting release studies under sink conditions via dynamic dialysis at the same temperature and buffer pH. A nearly identical rate constant for drug release could be obtained from dynamic dialysis data when appropriate volume corrections were applied and a mechanism-based mathematical model was employed to account for lipid bilayer binding and dialysis membrane transport. The usefulness of the nonsink method combined with mathematical modeling was further explored by demonstrating the effects of topotecan dimerization and bilayer surface charge potential on the bilayer/water partition coefficient at varying suspension concentrations of lipid and drug.

Drug-in-cyclodextrin-in-liposomes: a promising delivery system for hydrophobic drugs

INTRODUCTION

Recently, the entrapment of hydrophobic drugs in the form of water-soluble drug-cyclodextrin (CD) complex in liposomes has been investigated as a new strategy to combine the relative advantages of CDs and liposomes into one system, namely drug-in-CD-in-liposome (DCL) systems.

AREAS COVERED

For DCLs preparation, an overall understanding of the interaction between CDs and lipid components of liposomes is necessary and valuable. The present article reviews the preparation, characterization and application of DCLs, especially as antitumor or transdermal carriers. Double-loading technique, an interesting strategy to control release and increase drug-loading capacity, is also discussed.

EXPERT OPINION

DCL approach can be useful in increasing drug solubility and vesicles stability, in controlling the in vivo fate of hydrophobic drugs and in avoiding burst release of drug from the vesicles. To obtain stable DCL, the CDs should have a higher affinity to drug molecules compared with liposomal membrane lipids. DCLs prepared by double-loading technique seem to be a suitable targeted drug delivery system because they have a fast onset action with prolonged drug release process and the significantly enhanced drug-loading capacity. In particular, DCLs are suitable for the delivery of hydrophobic drugs which also possess volatility.

The role of pH and ring-opening hydrolysis kinetics on liposomal release of topotecan

The use of liposomal delivery systems for the treatment of cancer has been extensively researched because of their passive targeting to the vasculature of solid tumors. While their potential to provide prolonged retention and high drug encapsulation is desirable for anticancer agents, a mechanistic understanding is required to optimize and design liposomal drug delivery systems capable of controllable release tailored to tumor type and patient. Topotecan (TPT) is a topoisomerase I inhibitor that undergoes reversible, pH-sensitive ring-opening hydrolysis. TPT may benefit from liposomal formulation using active loading strategies to generate low intravesicular pH to prolong drug retention and increase drug encapsulation. This paper develops a mathematical model to describe TPT's permeability as a function of pH by accounting for the drug's ionization state, membrane binding, and ring-opening interconversion kinetics. Studies were conducted to determine the acid dissociation constant of TPT's phenolic -OH and interconversion kinetics between TPT's lactone and carboxylate forms. Using the constants determined from these studies and release studies conducted at varying pH, permeability coefficients and membrane binding constants for each species of TPT were determined. Based on this model, three permeable species were observed. Interestingly, the two most permeable species were zwitterionic forms of TPT, and the permeability of the lactone zwitterion was comparable to that of the neutral form of another camptothecin analogue. Furthermore, release was affected by based-catalyzed interconversion kinetics between TPT's lactone and carboxylate forms. At neutral pH, release was rate-limited by formation of the TPT lactone from the ring-opened carboxylate form. Based on these findings, the developed model describing liposomal release of TPT may be used in the future to evaluate and optimize loading and subsequent release of liposomal TPT formulations utilizing active loading strategies.

Remote loading of preencapsulated drugs into stealth liposomes

Loading drugs into carriers such as liposomes can increase the therapeutic ratio by reducing drug concentrations in normal tissues and raising their concentrations in tumors. Although this strategy has proven advantageous in certain circumstances, many drugs are highly hydrophobic and nonionizable and cannot be loaded into liposomes through conventional means. We hypothesized that such drugs could be actively loaded into liposomes by encapsulating them into specially designed cyclodextrins. To test this hypothesis, two hydrophobic drugs that had failed phase II clinical trials because of excess toxicity at deliverable doses were evaluated. In both cases, the drugs could be remotely loaded into liposomes after their encapsulation (preloading) into cyclodextrins and administered to mice at higher doses and with greater efficacy than possible with the free drugs.

Glutamic acid and its derivatives: candidates for rational design of anticancer drugs

Throughout the history of human civilizations, cancer has been a major health problem. Its treatment has been interesting but challenging to scientists. Glutamic acid and its derivative glutamine are known to play interesting roles in cancer genesis, hence, it was realized that structurally variant glutamic acid derivatives may be designed and developed and, might be having antagonistic effects on cancer. The present article describes the state-of-art of glutamic acid and its derivatives as anticancer agents. Attempts have been made to explore the effectivity of drug-delivery systems based on glutamic acid for the delivery of anticancer drugs. Moreover, efforts have also been made to discuss the mechanism of action of glutamic acid derivatives as anticancer agents, clinical applications of glutamic acid derivatives, as well as recent developments and future perspectives of glutamic acid drug development have also been discussed.

Computer-aided design of liposomal drugs: In silico prediction and experimental validation of drug candidates for liposomal remote loading

Previously we have developed and statistically validated Quantitative Structure Property Relationship (QSPR) models that correlate drugs' structural, physical and chemical properties as well as experimental conditions with the relative efficiency of remote loading of drugs into liposomes (Cern et al., J. Control. Release 160 (2012) 147-157). Herein, these models have been used to virtually screen a large drug database to identify novel candidate molecules for liposomal drug delivery. Computational hits were considered for experimental validation based on their predicted remote loading efficiency as well as additional considerations such as availability, recommended dose and relevance to the disease. Three compounds were selected for experimental testing which were confirmed to be correctly classified by our previously reported QSPR models developed with Iterative Stochastic Elimination (ISE) and k-Nearest Neighbors (kNN) approaches. In addition, 10 new molecules with known liposome remote loading efficiency that were not used by us in QSPR model development were identified in the published literature and employed as an additional model validation set. The external accuracy of the models was found to be as high as 82% or 92%, depending on the model. This study presents the first successful application of QSPR models for the computer-model-driven design of liposomal drugs.

Determination of drug release kinetics from nanoparticles: overcoming pitfalls of the dynamic dialysis method

Dynamic dialysis is one of the most common methods for the determination of release kinetics from nanoparticle drug delivery systems. Drug appearance in the "sink" receiver compartment is a consequence of release from the nanoparticles into the dialysis chamber followed by diffusion across the dialysis membrane. This dual barrier nature inherent in the method complicates data interpretation and may lead to incorrect conclusions regarding nanoparticle release half-lives. Although the need to consider the barrier properties of the dialysis membrane has long been recognized, there is insufficient quantitative appreciation for the role of the driving force for drug transport across that membrane. Reversible nanocarrier binding of the released drug reduces the driving force for drug transport across the dialysis membrane leading to a slower overall apparent release rate. This may lead to the conclusion that a given nanoparticle system will provide a sustained release in vivo when it will not. This study demonstrates these phenomena using model lipophilic drug-loaded liposomes varying in lipid composition to provide variations in bilayer permeability and membrane binding affinities. Model simulations of liposomal transport as measured by dynamic dialysis were conducted to illustrate the interplay between the liposome concentration, membrane/water partition coefficient, and the apparent release rate. Reliable determination of intrinsic liposomal bilayer permeability coefficients for lipophilic drugs by dynamic dialysis requires validation of drug release kinetics at varying nanoparticle concentration and the determination of membrane binding coefficients along with appropriate mechanism-based mathematical modeling to ensure the reliability and proper interpretation of the data.

Application of response surface methodology in development of sirolimus liposomes prepared by thin film hydration technique

Introduction : The present investigation was aimed to optimize the formulating process of sirolimus liposomes by thin film hydration method. Methods : In this study, a 3(2) factorial design method was used to investigate the influence of two independent variables in the preparation of sirolimus liposomes. The dipalmitoylphosphatidylcholine (DPPC) /Cholesterol (Chol) and dioleoyl phosphoethanolamine(DOPE) /DPPC molar ratios were selected as the independent variables. Particle size (PS) and Encapsulation Efficiency (EE %) were selected as the dependent variables. To separate the un-encapsulated drug, dialysis method was used. Drug analysis was performed with a validated RP-HPLC method. Results : Using response surface methodology and based on the coefficient values obtained for independent variables in the regression equations, it was clear that the DPPC/Chol molar ratio was the major contributing variable in particle size and EE %. The use of a statistical approach allowed us to see individual and/or interaction effects of influencing parameters in order to obtain liposomes with desired properties and to determine the optimum experimental conditions that lead to the enhancement of characteristics. In the prediction of PS and EE % values, the average percent errors are found to be as 3.59 and 4.09%. This value is sufficiently low to confirm the high predictive power of model. Conclusion : Experimental results show that the observed responses were in close agreement with the predicted values and this demonstrates the reliability of the optimization procedure in prediction of PS and EE % in sirolimus liposomes preparation.

The effects of lyophilization on the physico-chemical stability of sirolimus liposomes

PURPOSE

The major limitation in the widespread use of liposome drug delivery system is its instability. Lyophilization is a promising approach to ensure the long-term stability of liposomes. The aim of this study was to prepare sirolimus-loaded liposomes, study their stability and investigate the effect of lyophilization either in the presence or in the absence of lyoprotectant on liposome properties.

METHODS

Two types of multi-lamellar liposomes, conventional and fusogenic, containing sirolimus were prepared by modified thin film hydration method with different ratio of dipalmitoylphosphatidylcholine (DPPC), cholesterol and dioleoylphosphoethanolamine (DOPE), and were lyophilized with or without dextrose as lyoprotectant. Chemical stability investigation was performed at 4°C and 25°C until 6 months using a validated HPLC method. Physical stability was studied with determination of particle size (PS) and encapsulation efficiency (EE %) of formulations through 6 months.

RESULTS

Chemical stability test at 4°C and 25°C until 6 months showed that drug content of liposomes decreased 8.4% and 20.2% respectively. Initial mean EE % and PS were 72.8 % and 582 nm respectively. After 6 months mean EE % for suspended form, lyophilized without lyoprotectant and lyophilized with lyoprotectant were 54.8 %, 62.3% and 67.1 % at 4°C and 48.2%, 60.4 % and 66.8 % at 25°C respectively. Corresponding data for mean PS were 8229 nm, 2397 nm and 688nm at 4°C and 9362 nm, 1944 nm and 737 nm at 25°C respectively.

CONCLUSION

It is concluded that lyophilization with and without dextrose could increase shelf life of liposome and dextrose has lyoprotectant effect that stabilized liposomes in the lyophilization process.

[Nanotechnology: a big revolution from the small world]

Nanotechnology is a multidisciplinary field originating from the interaction of several different disciplines, such as engineering, physics, biology and chemistry. New materials and devices effectively interact with the body at molecular level, yielding a brand new range of highly selective and targeted applications designed to maximize the therapeutic efficiency while reducing the side effects. Liposomes, quantum dots, carbon nanotubes and superparamagnetic nanoparticles are among the most assessed nanotechnologies. Meanwhile, other futuristic platforms are paving the way toward a new scientific paradigm, able to deeply change the research path in the medical science. The growth of nanotechnology, driven by the dramatic advances in science and technology, clearly creates new opportunities for the development of the medical science and disease treatment in human health care. Despite the concerns and the on-going studies about their safety, nanotechnology clearly emerges as holding the promise of delivering one of the greatest breakthroughs in the history of medical science.