Polysaccharide-based micro/nanohydrogels for delivering macromolecular therapeutics

Zein/Polysaccharide Nanoscale Electrostatic Complexes: Preparation, Drug Encapsulation and Antibacterial Properties

Characterization of zein aqueous solutions, as a function of the ethanol content and pH, was performed, giving information on the zein aggregation state for the construction of complexes. The aggregation state and surface charge of zein was found to depend on the mixed solvent composition and pH. Nonstoichiometric complex nanoparticles (NPECs) were prepared by electrostatically self-assembling zein, as the polycation, and sodium alginate or chondroitin sulfate, as the polyanions, at a pH of 4. A wide range of parameters were investigated: the alcohol-water content in the zein solutions, the charge molar ratios, the solution addition order and the addition rate. The resulting nanoparticles were characterized by dynamic and electrophoretic light scattering, circular dichroism and scanning electron microscopy. The smallest size for the NPECs (100 nm) was obtained when the polysaccharides acted as the titrate with an addition rate of 0.03 mL·min-1. The NPECs with the best characteristics were selected for loading with ciprofloxacin and then deposited on a cellulosic material in order to evaluate their antibacterial activity. Substantial drug encapsulation with desired drug release profiles were found together with notable antibacterial efficiency, showing the tunability of the properties for both the zein and its complexes with polysaccharides, together with their application potential in the biomedical field.

Construction of intelligent drug delivery system based on polysaccharide-derived polymer micelles: A review

Micelles are nanostructures developed via the spontaneous assembly of amphiphilic polymers in aqueous systems, which possess the advantages of high drug stability or active-ingredient solubilization, targeted transport, controlled release, high bioactivity, and stability. Polysaccharides have excellent water solubility, biocompatibility, and degradability, and can be modified to achieve a hydrophobic core to encapsulate hydrophobic drugs, improve drug biocompatibility, and achieve regulated delivery of the loaded drug. Micelles drug delivery systems based on polysaccharides and their derivatives show great potential in the biomedical field. This review discusses the principles of self-assembly of amphiphilic polymers and the formation of micelles; the preparation of amphiphilic polysaccharides is described in detail, and an overview of common polysaccharides and their modifications is provided. We focus on the review of strategies for encapsulating drugs in polysaccharide-derived polymer micelles (PDPMs) and building intelligent drug delivery systems. This review provides new research directions that will help promote future research and development of PDPMs in the field of drug carriers.

Comparative catalytic reduction and degradation with biodegradable sodium alginate based nanocomposite: Zinc oxide/N-doped carbon nitride/sodium alginate

Sodium alginate (SA) is a biodegradable macromolecule which is used to synthesize nanocomposites and their further use as catalysis. Zinc oxide (ZnO) and nitrogen doped carbon nitride (ND-C3N4) nanoparticles are prepared using solvothermal and hydrothermal methods, respectively. ZnO/ND-C3N4/SA nanocomposites are successfully synthesized by employing in-situ polymerization. The presence of essential functional groups is confirmed by Fourier transform infrared (FTIR) spectroscopic analysis. Controlled spherical morphology for ZnO nanoparticles, with an average diameter of ∼52 nm, is shown by Scanning electron microscopic (SEM) analysis, while rice-like grain structure with an average grain size ∼62 nm is exhibited by ND-C3N4 nanoparticles. The presence of required elements is confirmed by Energy dispersive X-ray spectroscopic (EDX) analysis. The crystalline nature of nanocomposites is verified by X-ray diffraction spectroscopic (XRD) analysis. The investigation of the catalytic efficiency for degradation and reduction of various organic dyes is carried out on nanoparticles and nanocomposites. Thorough examination and comparison of parameters, such as apparent rate constant (kapp), reduction time, percentage reduction, reduced concentration and half-life, are conducted for all substrates. The nanocomposites show greater efficiency than nanoparticles in both reactions: catalytic reduction and catalytic degradation.

The physical and structural properties of acid-Ca2+ induced casein-alginate/Ca2+ double network gels

The design of protein or polysaccharide interpenetrating network gels according to their physicochemical properties is required to obtain the desired properties of hydrogels. In this study, a method was proposed to prepare casein-calcium alginate (CN-Alg/Ca²⁺) interpenetrating double-network gels by the release of calcium from a calcium retarder during acidification to form calcium-alginate (Alg/Ca²⁺) gel and casein (CN) acid gel. Compared with the casein-sodium alginate (CN-Alg) composite gel, the CN-Alg/Ca²⁺ dual gel network with an interpenetrating network gel structure has better water-holding capacity (WHC) and hardness. The rheology and microstructure results showed that the dual-network gels of CN and Alg/Ca²⁺ induced by gluconic acid-δ-sodium (GDL) and calcium ions were the network structure of the Alg/Ca²⁺ gel, which was the "first network", and the CN gel, which was the "second network". It was proven that the microstructure, texture characteristics, and WHC of the double-network gels could be regulated by changing the concentration of Alg in the double-network gels and that the 0.3 % CN-Alg/Ca²⁺ double gels showed the highest WHC and firmness values. The aim of this study was to provide useful information for the preparation of polysaccharide-protein mixed gels in the food industry or other fields.

Amino acid modified OCMC-g-Suc-β-CD nanohydrogels carrying lapatinib and ginsenoside Rg1 exhibit high anticancer activity in a zebrafish model

Nanohydrogels show great potential as efficient drug carriers due to their biocompatibility, low toxicity, and high water absorbability. In this paper, we prepared two O-carboxymethylated chitosan (OCMC)-based polymers functionalized with β-cyclodextrin (β-CD) and amino acid. The structures of the polymers were characterized by Fourier Transform Infrared (FTIR) Spectroscopy. Morphological study was carried out on a Transmission Electron Microscope (TEM), and the results indicated that the two polymers had irregular spheroidal structure with some pores distributed on their surface. The average particle diameter was below 500 nm, and the zeta potential was above +30 mV. The two polymers were further used for preparing nanohydrogels loaded with anticancer drugs lapatinib and ginsenoside Rg1, and the resulting nanohydrogels showed high drug loading efficiency and pH-sensitive (pH = 4.5) drug release behavior. In vitro cytotoxicity investigation revealed that the nanohydrogels exhibited high cytotoxicity against lung cancer (A549) cells. In vivo anticancer investigation was performed in a transgenic Tg(fabp10:rtTA2s-M2; TRE2:EGFP-kras ^V12) zebrafish model. The results showed that the synthesized nanohydrogels significantly inhibited the expression of EGFP-kras ^v12 oncogene in zebrafish liver, and the L-arginine modified OCMC-g-Suc-β-CD nanohydrogels loading lapatinib and ginsenoside Rg1 showed the best results.

Preparation of PEI-modified nanoparticles by dopamine self-polymerization for efficient DNA delivery

Achieving efficient and safe gene delivery is great of significance to promote the development of gene therapy. In this work, a polydopamine (PDA) layer was coated on the surface of Fe₃ O₄ nanoparticles (NPs) by dopamine (DA) self-polymerization, and then magnetic Fe₃ O₄ NPs were prepared by the Michael addition between amino groups in polyethyleneimine (PEI) and PDA. The prepared Fe₃ O₄ NPs (named Fe₃ O₄ @PDA@PEI) were characterized by FTIR, atomic force microscopy (AFM) and scanning electron microscope (SEM). As an efficient and safe gene carrier, the potential of Fe₃ O₄ @PDA@PEI was evaluated by agarose gel electrophoresis, MTT assay, fluorescence microscopy, flow cytometry. The results shows that the Fe₃ O₄ @PDA@PEI NPs is stable hydrophilic nanoparticles with a particle size of 50-150 nm. It can efficiently condense DNA at low N/P ratios and protect it from nuclease degradation. In addition, the Fe₃ O₄ @PDA@PEI NPs has higher safety than PEI. Further, the Fe₃ O₄ @PDA@PEI/DNA polyplexes could be effectively absorbed by cells and successfully transfected, and exhibit higher cellular uptake and gene transfection efficiency than PEI/DNA polyplexes. The findings indicate that the Fe₃ O₄ @PDA@PEI NPs has the potential to be developed into a novel gene vector. This article is protected by copyright. All rights reserved.

Natural Polysaccharide-Based Nanodrug Delivery Systems for Treatment of Diabetes

In recent years, natural polysaccharides have been considered as the ideal candidates for novel drug delivery systems because of their good biocompatibility, biodegradation, low immunogenicity, renewable source and easy modification. These natural polymers are widely used in the designing of nanocarriers, which possess wide applications in therapeutics, diagnostics, delivery and protection of bioactive compounds or drugs. A great deal of studies could be focused on developing polysaccharide nanoparticles and promoting their application in various fields, especially in biomedicine. In this review, a variety of polysaccharide-based nanocarriers were introduced, including nanoliposomes, nanoparticles, nanomicelles, nanoemulsions and nanohydrogels, focusing on the latest research progress of these nanocarriers in the treatment of diabetes and the possible strategies for further study of polysaccharide nanocarriers.

Nanogels as Novel Nanocarrier Systems for Efficient Delivery of CNS Therapeutics

Nanogels have come out as a great potential drug delivery platform due to its prominently high colloidal stability, high drug loading, core-shell structure, good permeation property and can be responsive to environmental stimuli. Such nanoscopic drug carriers have more excellent abilities over conventional nanomaterials for permeating to brain parenchyma in vitro and in vivo. Nanogel-based system can be nanoengineered to bypass physiological barriers via non-invasive treatment, rendering it a most suitable platform for the management of neurological conditions such as neurodegenerative disorders, brain tumors, epilepsy and ischemic stroke, etc. Therapeutics of central nervous system (CNS) diseases have shown marked limited site-specific delivery of CNS by the poor access of various drugs into the brain, due to the presences of the blood-brain barrier (BBB) and blood-cerebrospinal fluid barrier (BCSFB). Hence, the availability of therapeutics delivery strategies is considered as one of the most major challenges facing the treatment of CNS diseases. The primary objective of this review is to elaborate the newer advances of nanogel for CNS drugs delivery, discuss the early preclinical success in the field of nanogel technology and highlight different insights on its potential neurotoxicity.

Xanthan and alginate-matrix used as transdermal delivery carrier for piroxicam and ketoconazole

This study presents new drug delivery systems based on xanthan, unmodified or modified by esterification with oleic acid, and alginate for controlled release of bioactive substances with anti-inflammatory (piroxicam) and antifungal properties (ketoconazole). The mechanical properties of the developed drug carriers showed that their compressive strength was affected by the encapsulation of the bioactive principles. When ketoconazole was added into the xanthan/alginate matrix, an increment in the mechanical strength was recorded (66.68% compression). The release of the active principles from the materials was best described by the Korsmeyer-Peppas model, with non-Fickian or Fickian diffusion (the values of the exponent of release are between 0.29 and 0.75), depending on the composition of the polymeric matrix. The release rate constant presents smaller values for the materials based on chemically modified xanthan (between 0.89 and 20.11) as compared with materials based on the unmodified form (between 4.27 and 25.00). All materials were characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The designed systems prove to have antimicrobial and anti-inflammatory activity. The findings make prone these biomaterials for the manufacture of transdermal drug delivery systems.

Polydopamine, harness of the antibacterial potentials-A review

Antibiotic resistance is one of the major causes of morbidity and mortality, triggered by the adhesion of microbes and to some extent the formation of biofilms. This condition has been quite challenging in the health and industrial sector. Conditions and processes required to foil these infectious and resistance are of much concern. The synthesis of PDA material, inspired by the Mytilus edulis foot protein (MEFP)5 possesses unique characteristics that allow for, adhesion, photothermal therapy, synergistic effects with other materials, biocompatibility process, etc. Therefore, their usage holds great potential for dealing with both the infectious nature and the antibiotic resistance processes. Hence, this review provides an overview of the mechanism involved in accomplishing and eradicating bacteria, the recently harnessed antibacterial effect of the PDA through other properties they possess, a way forward in tapping the benefit embedded in the PDA, and the future perspective.

Magnetic Nanoparticles in Medicine: Progress, Problems, and Advances

The review presents an analysis of the current state of research related to the design, development, and practical application of methods for biomedical radioelectronics and nanomedicine, including the use of magnetic nanoparticles. The important role of rational scientific physical approaches and experimental methods in the design of efficient and safe magnetic nanoparticle-based agents for therapy, controlled targeted drug delivery, and diagnostics, including spatial imaging, is emphasized. Examples of successful practical application of magnetic nanoparticles in medicine based on these methods are given, and an analysis of the main problems and prospects of this area of science is conducted.

Development of a hydrocolloid bio-ink for 3D bioprinting

Development of new hydrocolloid bio-ink from quince seed and utilization for 3D cell culture.

Synthesis of nanomedicine hydrogel microcapsules by droplet microfluidic process and their pH and temperature dependent release

Chitosan and alginate hydrogels are attractive because they are highly biocompatible and suitable for developing nanomedicine microcapsules. Here we fabricated a polydimethylsiloxane-based droplet microfluidic reactor to synthesize nanomedicine hydrogel microcapsules using Au@CoFeB-Rg3 as a nanomedicine model and a mixture of sodium alginate and PEG-g-chitosan crosslinked by genipin as a hydrogel model. The release kinetics of nanomedicines from the hydrogel were evaluated by simulating the pH and temperature of the digestive tract during drug transport and those of the target pathological cell microenvironment. Their pH and temperature-dependent release kinetics were studied by measuring the mass loss of small pieces of thin films formed by the nanomedicine-encapsulating hydrogels in buffers of pH 1.2, 7.4, and 5.5, which replicate the pH of the stomach, gut and blood, and cancer microenvironment, respectively, at 20 °C and 37 °C, corresponding to the storage temperature of hydrogels before use and normal body temperature. Interestingly, nanomedicine-encapsulating hydrogels can undergo rapid decomposition at pH 5.5 and are relatively stable at pH 7.4 at 37 °C, which are desirable qualities for drug delivery, controlled release, and residue elimination after achieving target effects. These results indicate that the designed nanomedicine hydrogel microcapsule system is suitable for oral administration.

Development of a Polysaccharide-Based Hydrogel Drug Delivery System (DDS): An Update

Delivering a drug to the target site with minimal-to-no off-target cytotoxicity is the major determinant for the success of disease therapy. While the therapeutic efficacy and cytotoxicity of the drug play the main roles, the use of a suitable drug delivery system (DDS) is important to protect the drug along the administration route and release it at the desired target site. Polysaccharides have been extensively studied as a biomaterial for DDS development due to their high biocompatibility. More usefully, polysaccharides can be crosslinked with various molecules such as micro/nanoparticles and hydrogels to form a modified DDS. According to IUPAC, hydrogel is defined as the structure and processing of sols, gels, networks and inorganic–organic hybrids. This 3D network which often consists of a hydrophilic polymer can drastically improve the physical and chemical properties of DDS to increase the biodegradability and bioavailability of the carrier drugs. The advancement of nanotechnology also allows the construction of hydrogel DDS with enhanced functionalities such as stimuli-responsiveness, target specificity, sustained drug release, and therapeutic efficacy. This review provides a current update on the use of hydrogel DDS derived from polysaccharide-based materials in delivering various therapeutic molecules and drugs. We also highlighted the factors that affect the efficacy of these DDS and the current challenges of developing them for clinical use.

Fucoidan-functionalized polysaccharide submicroparticles loaded with alteplase for efficient targeted thrombolytic therapy

Intravenous administration of fibrinolytic drugs is the standard treatment of acute thrombotic diseases. However, current fibrinolytics exhibit limited clinical efficacy because of their short plasma half-lives and might trigger hemorrhagic transformations. Therefore, it is mandatory to develop innovative nanomedicine-based solutions for more efficient and safer thrombolysis with biocompatible and biodegradable thrombus-targeted nanocarrier. Herein, fucoidan-functionalized hydrogel polysaccharide submicroparticles with high biocompatibility are elaborated by the inverse miniemulsion/crosslinking method. They are loaded with the gold standard fibrinolytic - alteplase - to direct site-specific fibrinolysis due to nanomolar interactions between fucoidan and P-selectin overexpressed on activated platelets and endothelial cells in the thrombus area. The thrombus targeting properties of these particles are validated in a microfluidic assay containing recombinant P-selectin and activated platelets under arterial and venous blood shear rates as well as in vivo. The experiments on the murine model of acute thromboembolic ischemic stroke support this product's therapeutic efficacy, revealing a faster recanalization rate in the middle cerebral artery than with free alteplase, which reduces post-ischemic cerebral infarct lesions and blood-brain barrier permeability. Altogether, this proof-of-concept study demonstrates the potential of a biomaterial-based targeted nanomedicine for the precise treatment of acute thrombotic events, such as ischemic stroke.

Polydopamine nanoparticle-dotted food gum hydrogel with excellent antibacterial activity and rapid shape adaptability for accelerated bacteria-infected wound healing

Most commonly used wound dressings have severe problems, such as an inability to adapt to wound shape or a lack of antibacterial capacity, affecting their ability to meet the requirements of clinical applications. Here, a nanocomposite hydrogel (XKP) is developed by introducing polydopamine nanoparticles (PDA NPs) into a food gum matrix (XK, consisting of xanthan gum and konjac glucomannan, both FDA-approved food thickening agents) for skin wound healing. In this system, the embedded PDA NPs not only interact with the food gum matrix to form a hydrogel with excellent mechanical strength, but also act as photothermal transduction agents to convert near-infrared laser radiation to heat, thereby triggering bacterial death. Moreover, the XKP hydrogel has high elasticity and tunable water content, enabling it to adapt to the shape of the wound and insulate it, providing a moist environment suitable for healing. In-vivo skin wound healing results clearly demonstrate that XKP can significantly accelerate the healing of wounds by reducing the inflammatory response and promoting vascular reconstruction. In summary, this strategy provides a simple and practical method to overcome the drawbacks of traditional wound dressings, and provides further options when choosing suitable wound healing materials for clinical applications.

Recent Progress on Polysaccharide-Based Hydrogels for Controlled Delivery of Therapeutic Biomolecules

A plethora of applications using polysaccharides have been developed in recent years due to their availability as well as their frequent nontoxicity and biodegradability. These polymers are usually obtained from renewable sources or are byproducts of industrial processes, thus, their use is collaborative in waste management and shows promise for an enhanced sustainable circular economy. Regarding the development of novel delivery systems for biotherapeutics, the potential of polysaccharides is attractive for the previously mentioned properties and also for the possibility of chemical modification of their structures, their ability to form matrixes of diverse architectures and mechanical properties, as well as for their ability to maintain bioactivity following incorporation of the biomolecules into the matrix. Biotherapeutics, such as proteins, growth factors, gene vectors, enzymes, hormones, DNA/RNA, and antibodies are currently in use as major therapeutics in a wide range of pathologies. In the present review, we summarize recent progress in the development of polysaccharide-based hydrogels of diverse nature, alone or in combination with other polymers or drug delivery systems, which have been implemented in the delivery of biotherapeutics in the pharmaceutical and biomedical fields.

Polysaccharide Chemistry in Drug Delivery, Endocrinology, and Vaccines

Polysaccharides, due to their outstanding properties, have attracted the attention of researchers, working in the biomedical field and especially of those working in drug delivery. Modified/functionalized polysaccharides further increase the importance for various applications. Delivery of therapeutics for diverse ailments in different endocrine glands and hormones safely, is a focal point of researchers working in the field. Among the routes followed, the transdermal route is preferred due to non-exposure of active moieties to the harsh gastric environment and first-pass metabolism. This review starts with the overview of polysaccharides used for the delivery of various therapeutic agents. Advantages of polysaccharides used in the transdermal route are addressed in detail. Types of polysaccharides will be elaborated through examples, and in this context, special emphasis will be on the polysaccharides being used for synthesis of the membranes/films. Techniques employed for their modification to design novel carriers for therapeutics delivery will also be discussed. The review will end with a brief discussion on recent developments and future perspectives for delivery of therapeutic agents, and vaccine development.

A review on the applications of electrospun chitosan nanofibers for the cancer treatment

In recent years, the incidence of cancer is increasing every day due to poor quality of life (industrialization of life). Therefore, the treatment of cancer has received much attention from therapists. So far, many anticancer drugs have been used to treat cancer patents. However, the direct use of the anticancer drugs has the adverse side effects for patents and several limitations to treat process. Natural chitosan nanofibers prepared by electrospinning method have unique properties such as high surface area, high porosity, suitable mechanical properties, nontoxicity, biocompatibility, biodegradability, biorenewable, low immunogenicity, better clinical functionality, analogue to extracellular model, and easy production in large scale. Therefore, this bio-polymer is a very suitable case to deliver of the anti-cancer drugs to treat cancer patents. In this review summarizes the electrospinning synthesis of chitosan and its therapeutic application for the various cancer treatment.

Strategies to load therapeutics into polysaccharide-based nanogels with a focus on microfluidics: A review

Nowadays nanoparticles are increasingly investigated for the targeted and controlled delivery of therapeutics, as suggested by the high number of research articles (2400 in 2000 vs 8500 in 2020). Among them, almost 2% investigated nanogels in 2020. Nanogels or nanohydrogels (NGs) are nanoparticles formed by a swollen three-dimensional network of synthetic polymers or natural macromolecules such as polysaccharides. NGs represent a highly versatile nanocarrier, able to deliver a number of therapeutics. Currently, NGs are undergoing clinical trials for the delivery of anti-cancer vaccines. Herein, the strategies to load low molecular weight drugs, (poly)peptides and genetic material into polysaccharide NGs as well as to formulate NGs-based vaccines are summarized, with a focus on the microfluidics approach.

Tuning Transport Phenomena in Agarose Gels for the Control of Protein Nucleation Density and Crystal Form

Agarose gels provide the ideal environment for studying the nucleation step of complex biomacromolecules under diffusion-controlled conditions. In the present paper, we characterized the influence of agarose on the nucleation of three model proteins, i.e., lysozyme, insulin, and proteinase K, as a function of the agarose concentration using a batch method set-up inside flat capillaries. By using this set-up, we were able to directly count the number of crystals in a given volume and correlate it with the amount of agarose and with the average crystal size. We also studied the crystallization behavior of proteinase K with free-interface diffusion so that batch conditions were achieved through slow diffusion of the precipitant. Thanks to the control over the protein mass transport imposed by the network, a previously unknown crystal form, P212121, was obtained, and the three-dimensional structure was determined at a 1.6 Å resolution. Overall, the versatility of agarose gels makes them ideal candidates for the preparation of microcrystalline suspensions of biopharmaceuticals with precise and reproducible crystal attributes or for the exploration of the existence of different polymorphs.

Synthesis and Characterization of Biocompatible Methacrylated Kefiran Hydrogels: Towards Tissue Engineering Applications

Hydrogel application feasibility is still limited mainly due to their low mechanical strength and fragile nature. Therefore, several physical and chemical cross-linking modifications are being used to improve their properties. In this research, methacrylated Kefiran was synthesized by reacting Kefiran with methacrylic anhydride (MA). The developed MA-Kefiran was physicochemically characterized, and its biological properties evaluated by different techniques. Chemical modification of MA-Kefiran was confirmed by ¹H-NMR and FTIR and GPC-SEC showed an average Mw of 793 kDa (PDI 1.3). The mechanical data obtained revealed MA-Kefiran to be a pseudoplastic fluid with an extrusion force of 11.21 ± 2.87 N. Moreover, MA-Kefiran 3D cryogels were successfully developed and fully characterized. Through micro-CT and SEM, the scaffolds revealed high porosity (85.53 ± 0.15%) and pore size (33.67 ± 3.13 μm), thick pore walls (11.92 ± 0.44 μm) and a homogeneous structure. Finally, MA-Kefiran revealed to be biocompatible by presenting no hemolytic activity and an improved cellular function of L929 cells observed through the AlamarBlue^® assay. By incorporating methacrylate groups in the Kefiran polysaccharide chain, a MA-Kefiran product was developed with remarkable physical, mechanical, and biological properties, resulting in a promising hydrogel to be used in tissue engineering and regenerative medicine applications.

Self-Assembling, Ultrashort Peptide Gels as Antimicrobial Biomaterials

Supramolecular antimicrobial hydrogels based on peptides are attractive soft materials for the treatment of infections, considering their ease of preparation and benign fate in biological settings and in the environment. In particular, stimuli-responsive systems that can be assembled/disassembled ad hoc could offer the opportunity to switch on/off their bioactivity as needed. Besides, the shorter is the peptide, the lower its cost of production. However, a structure-to-function relationship is yet to be defined and reported activities are generally not yet competitive relative to traditional antibiotics. Inspiration for their design can be found in host defense peptides (HDPs), which can self-assemble to exert their function. This article reviews research developments in this emerging area, and it examines features, differences and similarities between antimicrobial and amyloid peptides to open the avenue towards the next generation of supramolecular antimicrobial peptides as innovative therapeutic materials.

Contributions of exopolysaccharides from lactic acid bacteria as biotechnological tools in food, pharmaceutical, and medical applications

Exopolysaccharides (EPS) are important bioproducts produced by some genera of lactic acid bacteria. EPS are famous for their shelf-life improving properties, techno-functional enhancing abilities in food and dairy industries, besides their beneficial health effects. Furthermore, exopolysaccharides have many prospective and well-established contributions in the field of drugs and diagnostic industry. In this review, classification of EPS produced by LAB was presented. Moreover, current and potential applications of EPS in food, dairy, baking industries, cereal-based, and functional products were described. Also, some clinical and pharmaceutical applications of EPS such as intelligent drug delivery systems (microsystems and nanosystems for sustained delivery), interpenetrating polymer networks (IPNs), anticancer drug-targeting, recombinant macromolecular biopharmaceuticals, gene delivery, tissue engineering, and role of EPS in diagnostics were highlighted. Finally, future prospects concerning enhancing EPS production, minimizing costs of their production, and exploring their contribution in further applications were discussed.

Formulation and Evaluation of Novel Hybridized Nanovesicles for Enhancing Buccal Delivery of Ciclopirox Olamine

Ciclopirox olamine (CPO) is a topical wide-spectrum antimycotic agent that possesses antifungal, antibacterial and anti-inflammatory activities. Loading CPO into a hybridized vesicular system is expected to enhance its buccal permeation and hence, therapeutic activity, whereas the frequent administration and side effects are reduced. Vesicular systems with high penetration ability were prepared based on cholesterol, Lipoid S45 or Phospholipon 90H, with span 60 while incorporating a penetration enhancer (Labrafac or labrasol) followed by full assessment of their size, entrapment efficiency, and drug release profiles. The optimum formulation, composed of Lipoid S45 and Labrafac, possessed the smallest vesicle size (346.1 nm), highest entrapment efficiency (94.4%), and sustained CPO release pattern, and was characterized for its morphology and thermal properties. This powerful mixture of the penetration enhancers (Lipoid S45 and Labrafac) in the designed hybridized vesicles was thoroughly investigated for their characteristics after being incorporated in bioadhesive gel. Moreover, enhanced antifungal activity was demonstrated either upon testing the designed formulation on agar plates or in vivo upon treating infected rabbits with the proposed formulation. Results suggest that the presented bioadhesive gel incorporating the CPO-loaded vesicles can be a promising delivery system that can offer a prolonged localized antifungal treatment with enhanced therapeutic effect.

Uptake and in vitro anticancer activity of oleic acid delivered in nanocapsules stabilized by amphiphilic derivatives of hyaluronic acid and chitosan

The nanoemulsion-based delivery systems have gained particular attention due to effective encapsulation and protection of hydrophobic active compounds. However, several features like limited stability, cellular uptake or release of payloads still need to be addressed. We investigated the uptake of the nanocapsules based on the amphiphilic derivative of hyaluronate with oleic acid cores (oil-in-water nanoemulsion) and their anticancer activity in vitro. The core-shell nanocapsules exhibiting long term stability in dispersion showed an enhanced uptake by cancer cells and effectively killed them only if composed of hyaluronate-based shells and oleic acid cores - the anionic chitosan-based shells and/or corn oil cores were used for control experiments. We concluded that the nanocapsules stabilized by the amphiphilic derivative of hyaluronic acid may serve as very stable and efficient delivery systems for oil-soluble compounds without necessity of application of low molecular weight (co)surfactants. The in vitro studies indicated anticancer activity of such delivered oleic acid and crucial role of hyaluronate shell of the nanocapsules in its efficient delivery and enzyme-triggered disintegration inside cells. Corn oil was shown as a nutrient that can serve as an inert vehicle in the studied nanoemulsion that exhibit application potential in food, dietary supplement industry and medicine.

Synergistic Combination of Sodium Aescinate-Stabilized, Polymer-Free, Twin-Like Nanoparticles to Reverse Paclitaxel Resistance

BACKGROUND

The development of paclitaxel (PTX) resistance seriously restricts its clinical efficacy. An attractive option for combating resistance is inhibiting the expression of P-glycoprotein (P-gp) in tumor cells. We have reported that flavokawain A (FKA) inhibited P-gp protein expression in PTX-resistant A549 (A549/T) cells, indicating that FKA combined with PTX may reverse PTX resistance. However, due to the variable pharmacokinetics of FKA and PTX, the conventional cocktail combination in clinics may cause uncertainty of treatment efficacy in vivo.

MATERIALS AND METHODS

To synergistically elevate the anti-cancer activity of PTX and FKA in vivo, the national medical products administration (NMPA) approved sodium aescinate (Aes) was utilized to stabilize hydrophobic PTX and FKA to form polymer-free twin like PTX-A nanoparticles (NPs) and FKA-A NPs.

RESULTS

The resulting nanoparticles prepared simply by nanoprecipitation possessed similar particle size, good stability and ultrahigh drug loadings of up to 50%. With the aid of Aes, these two drugs accumulated in tumor tissue by passive targeting and were efficiently taken up by A549/T cells; this resulted in significant suppression of tumor growth in A549/T homograft mice at a low PTX dose (2.5 mg·kg-1). Synergistic effects and reversed PTX resistance were achieved by the combination of PTX-A NPs and FKA-A NPs by inhibiting P-gp expression in tumor cells.

CONCLUSION

Using NMPA-approved Aes to prepare twin-like nanoparticles without introducing any new materials provides an efficient platform for combination chemotherapy and clinical translation.

Natural-based Hydrogels: A Journey from Simple to Smart Networks for Medical Examination

Natural hydrogels, due to their unique biological properties, have been used extensively for various medical and clinical examinations that are performed to investigate the signs of disease. Recently, complex-crosslinking strategies improved the mechanical properties and advanced approaches have resulted in the introduction of naturally derived hydrogels that exhibit high biocompatibility, with shape memory and self-healing characteristics. Moreover, the creation of self-assembled natural hydrogels under physiological conditions has provided the opportunity to engineer fine-tuning properties. To highlight recent studies of natural-based hydrogels and their applications for medical investigation, a critical review was undertaken using published papers from the Science Direct database. This review presents different natural-based hydrogels (natural, natural-synthetic hybrid and complex-crosslinked hydrogels), their historical evolution, and recent studies of medical examination applications. The application of natural-based hydrogels in the design and fabrication of biosensors, catheters and medical electrodes, detection of cancer, targeted delivery of imaging compounds (bioimaging) and fabrication of fluorescent bioprobes is summarised here. Without doubt, in future, more useful and practical concepts will be derived to identify natural-based hydrogels for a wide range of clinical examination applications.

Natural protein-templated fluorescent gold nanoclusters: Syntheses and applications

For the past decades, the synthesis of metal nanoclusters has been a great interest for research, for their unique physicochemical properties and great contributions to the catalytic, electrical and biomedical applications. Protein-templated gold nanoclusters (AuNCs) is a kind of fluorescent nanomaterials with good solubility, excellent stability, biocompatibility, decent quantum yields and active groups (-COOH, -NH₂) for facilitating modifications. Natural proteins are easily available, commercially affordable, diverse and multitudinous in animals, plants and foods, which provide a template pool for the exploration of AuNCs. This is one of the few reviews of specifically focusing on the natural protein-templated fluorescent AuNCs. The syntheses, properties and applications of different AuNCs were enumerated. Prospects were given on utilizing structure-modified proteins, bioactive enzymes, antibodies which should endow the AuNCs more favourable fluorescence performances and functional characteristics. The applications of AuNCs in analytical, biomedical and food sciences would be further heightened.

Carboxymethyl β-cyclodextrin grafted carboxymethyl chitosan hydrogel-based microparticles for oral insulin delivery

This study was aimed at utilizing polysaccharides for the development of effective hydrogel microparticles for oral insulin delivery that has a controlled, and sustained release to enhance paracellular transcellular absorption. Carboxymethyl β-cyclodextrin grafted carboxymethyl chitosan hydrogels (CMCD-g-CMCs) were prepared from carboxymethyl β-cyclodextrin (CMCD) and carboxymethyl chitosan (CMC) using a water-soluble carbodiimide as a crosslinker in the presence of N-hydroxysuccinimide. After synthesis, the hydrogel structures were determined via FT-IR and XRD analyses. The porous structure of hydrogels was confirmed by SEM observations and swelling behaviours. The insulin release behaviours were found to betriggered by pH in vitro. Results showed that insulin was successfully retained inside the hydrogels in the gastric environment and slowly released following passage to intestinal conditions. The stability of the secondary structure of insulin was studied by dichroism circular (CD) and fluorescence (FL) spectrophotometer measurement. There was no significant difference in the secondary structure between the native and released insulin. In vitro studies revealed that the hydrogel microparticles exhibited non-cytotoxicity and were transported across the Caco-2 cell monolayers mainly via the paracellular pathway. In order to examine the effectiveness of hydrogel-based sustained release microparticles in delivering insulin in vivo, we administered different insulin-loaded hydrogel microparticles to diabetic mice. In these studies, we found that the insulin-loaded hydrogel microparticles provided a significant and sustained (ranging from 6 h to 12 h) reduction in the blood glucose levels of diabetic mice compared with subcutaneous injection. Overall, these findings demonstrate that CMCD-g-CMCs may be a promising protein carrier for use in oral drug delivery.

Construction of functional curdlan hydrogels with bio-inspired polydopamine for synergistic periodontal antibacterial therapeutics

Curdlan, a bacteria-derived polysaccharide resource, possesses substantial potential for periodontal antimicrobial delivery. Here, the facile engineering of a functionalized curdlan/polydopamine (PDA) composite hydrogels was reported. The physiochemical evaluations of composite hydrogels proved their tunable properties associated with concentration of PDA including pore size, rheological property and swelling behavior. We have systematically assessed biocompatibility in vitro and found these hydrogels toxicity-free. Moreover, photothermal performance upon near infrared light (NIR) exposure was conducted and eventually indicated the best matches for antibacterial application. The acetate chlorhexidine (CHX) was chosen as a model antimicrobial and the release profiles demonstrated the entrapped CHX could be triggered and nicely controlled by NIR. The optimized bacteriostatic rate reached 99.9 %. Overall, we aimed to provide new curdlan-based hydrogels for periodontal antibacterial treatment by combining photothermal effect and antimicrobial simultaneously.

Biocompatible Hydrogels Based on Food Gums with Tunable Physicochemical Properties as Scaffolds for Cell Culture

Hydrogels composed of food gums have gained attention for future biomedical applications, such as targeted delivery and tissue engineering. For their translation to clinical utilization, reliable biocompatibility, sufficient mechanical performance, and tunable structure of polysaccharide hydrogels are required aspects. In this work, we report a unique hybrid polysaccharide hydrogel composed of salecan and curdlan, in which the former is a thickening agent and the latter serves as a network matrix. The physicochemical properties, such as mechanical strength, thermal stability, swelling, and morphology, of the developed composite hydrogel can be accurately modulated by varying the polysaccharide content. Importantly, cytotoxicity assays show the non-toxicity of this hybrid hydrogel. Furthermore, this hydrogel system can support cell proliferation, migration, and function. Altogether, our work proposes a new strategy to build a polysaccharide-constructed hydrogel scaffold, which holds much promise for tissue engineering in terms of cell engraftment, survival, proliferation, and function.

Amylopectin-Sodium Palmitate Complexes as Sustainable Nanohydrogels with Tunable Size and Fractal Dimensions

Starch-based nanohydrogels with polyelectrolyte characteristics may find unique applications. Herein, the branch chains of amylopectin (AP) were elongated to different extents by amylosucrase, followed by complexation with sodium palmitate (SP) to produce nanohydrogels. Modified AP (mAP) with a longer chain length displayed a better ability to complex with SP, and the mixtures exhibited nanosized particles with an average diameter ranging from 153.5 to 1049.8 nm. The gel strength of bulk nanohydrogels was dependent on the chain length of mAP and SP content, and their fractal dimension was between 1.82 and 2.45. The crystalline structure of native AP was altered from A- to B-type after chain elongation and, subsequently, to B + V-type after complexing with SP. Diffraction peaks of the complexes at 2θ of 7.5°, 12.9°, and 19.8° implied that the AP side chains formed left-handed single helices and the hydrophobic SP was entrapped in the helix cavity.

A dermatan sulfate-functionalized biomimetic nanocarrier for melanoma targeted chemotherapy

Melanoma is a malignant tumor of melanocytes that is a serious threat to human health. Dermatan sulfate (DS) is a natural glycosaminoglycan. Inspired by the origin of DS, we report a DS-functionalized biomimetic chitosan nanocarrier (DCNP) for melanoma targeted chemotherapy. DS can anchor to the surface of the chitosan nanocarrier (CNP) by forming amide bond. The SN38/DCNP can rapidly release the anti-tumor drug under acidic conditions. The functionalization of DS not only promoted the specific uptake behavior of melanoma cells, but also up-regulated cleaved caspase-3 and PARP promote tumor cell apoptosis. In vivo model, DCNP reduced the non-specific distribution of SN38 in the circulation and other tissues, while shows superior tumor targeting ability. SN38/DCNP significantly inhibit tumor growth and improved the survival rate. Moreover, SN38/DCNP has a milder myelosuppressive effect. The above results indicated that DS could be used as an excellent targeting unit for the treatment of melanoma.

Marine Polysaccharides in Pharmaceutical Applications: Fucoidan and Chitosan as Key Players in the Drug Delivery Match Field

The use of marine-origin polysaccharides has increased in recent research because they are abundant, cheap, biocompatible, and biodegradable. These features motivate their application in nanotechnology as drug delivery systems; in tissue engineering, cancer therapy, or wound dressing; in biosensors; and even water treatment. Given the physicochemical and bioactive properties of fucoidan and chitosan, a wide range of nanostructures has been developed with these polysaccharides per se and in combination. This review provides an outline of these marine polysaccharides, including their sources, chemical structure, biological properties, and nanomedicine applications; their combination as nanoparticles with descriptions of the most commonly used production methods; and their physicochemical and biological properties applied to the design of nanoparticles to deliver several classes of compounds. A final section gives a brief overview of some biomedical applications of fucoidan and chitosan for tissue engineering and wound healing.

Self-assembled nanoparticles of reduction-sensitive poly (lactic-co-glycolic acid)-conjugated chondroitin sulfate A for doxorubicin delivery: preparation, characterization and evaluation

In this study, reduction-sensitive self-assembled polymer nanoparticles based on poly (lactic-co-glycolic acid) (PLGA) and chondroitin sulfate A (CSA) were developed and characterized. PLGA was conjugated with CSA via a disulfide linkage (PLGA-ss-CSA). The critical micelle concentration (CMC) of PLGA-ss-CSA conjugate is 3.5 µg/mL. The anticancer drug doxorubicin (DOX) was chosen as a model drug, and was effectively encapsulated into the nanoparticles (PLGA-ss-CSA/DOX) with high loading efficiency of 15.1%. The cumulative release of DOX from reduction-sensitive nanoparticles was only 34.8% over 96 h in phosphate buffered saline (PBS, pH 7.4). However, in the presence of 20 mM glutathione-containing PBS environment, DOX release was notably accelerated and almost complete from the reduction-sensitive nanoparticles up to 96 h. Moreover, efficient intracellular DOX release of PLGA-ss-CSA/DOX nanoparticles was confirmed by CLSM assay in A549 cells. In vitro cytotoxicity study showed that the half inhibitory concentrations of PLGA-ss-CSA/DOX nanoparticles and free DOX against A549 cells were 1.141 and 1.825 µg/mL, respectively. Therefore, PLGA-ss-CSA/DOX nanoparticles enhanced the cytotoxicity of DOX in vitro. These results suggested that PLGA-ss-CSA nanoparticles could be a promising carrier for drug delivery.

Intracellular Delivery of Natural Antioxidants via Hyaluronan Nanohydrogels

Natural antioxidants, such as astaxanthin (AX), resveratrol (RV) and curcumin (CU), are bioactive molecules that show a number of therapeutic effects. However, their applications are remarkably limited by their poor water solubility, physico-chemical instability and low bioavailability. In the present work, it is shown that self-assembled hyaluronan (HA)-based nanohydrogels (NHs) are taken up by endothelial cells (Human Umbilical Vein Endothelial Cells, HUVECs), preferentially accumulating in the perinuclear area of oxidatively stressed HUVECs, as evidenced by flow cytometry and confocal microscopy analyses. Furthermore, NHs are able to physically entrap and to significantly enhance the apparent water solubility of AX, RV and CU in aqueous media. AX/NHs, RV/NHs and CU/NHs systems showed good hydrodynamic diameters (287, 214 and 267 nm, respectively), suitable ζ-potential values (-45, -43 and -37 mV, respectively) and the capability to neutralise reactive oxygen species (ROS) in tube. AX/NHs system was also able to neutralise ROS in vitro and did not show any toxicity against HUVECs. This research suggests that HA-based NHs can represent a kind of nano-carrier suitable for the intracellular delivery of antioxidant agents, for the treatment of oxidative stress in endothelial cells.

Synthesis of high payload nanohydrogels for the ecapsulation of hydrophilic molecules via inverse miniemulsion polymerization: caffeine as a case study

The association of an active principle with a nanocarrier is known to improve its stability and protect it from external factors. Nevertheless, loading of nanoparticles with highly hydrophilic substances like caffeine remains a tricky issue. In the present study, inverse miniemulsion systems were successfully coupled to UV radiation to synthesize polymeric nanohydrogels for drug delivery. The proper choice of the continuous and dispersed phase chemical composition led to the entrapment of active principle into the miniemulsion droplets. Our confinement-based strategy enabled unprecedented caffeine encapsulation efficiency inside 100-nm particles. Dimensional, thermal, and spectroscopic characterizations were carried out to investigate both unloaded and loaded nanohydrogels. Furthermore, in vitro release studies evaluated caffeine release kinetics from nanohydrogels by means of dialysis tests. It was demonstrated that controlled and sustained release occurred within the first 50 hours. Experimental data were found to fit the Higuchi model suggesting that the active principle release is diffusion controlled.