In vitro-in vivo correlation for complex non-oral drug products: Where do we stand?

Assessment of subcutaneously administered insulins using in vitro release cartridge: Medium composition and albumin binding

Biotherapeutics is the fastest growing class of drugs administered by subcutaneous injection. In vitro release testing mimicking physiological conditions at the injection site may guide formulation development and improve biopredictive capabilities. Here, anin vitrorelease cartridge (IVR cartridge) comprising a porous agarose matrix emulating subcutaneous tissue was explored. The objective was to assess effects of medium composition and incorporation of human serum albumin into the matrix. Drug disappearance was assessed for solution, suspension and in situ precipitating insulin products (Actrapid, Levemir, Tresiba, Mixtard 30, Insulatard, Lantus) using the flow-based cartridge. UV-Vis imaging and light microscopy visualized dissolution, precipitation and albumin binding phenomena at the injection site. Divalent cations present in the release medium resulted in slower insulin disappearance for suspension-based and in situ precipitating insulins. Albumin-binding acylated insulin analogs exhibited rapid disappearance from the cartridge; however, sustained retention was achieved by coupling albumin to the matrix. An in vitro-in vivorelation was established for the non-albumin-binding insulins.The IVR cartridge is flexible with potential in formulation development as shown by the ability to accommodate solutions, suspensions, and in situ forming formulations while tailoring of the system to probe in vivo relevant medium effects and tissue constituent interactions.

Towards in vitro - In vivo correlation models for in situ forming drug implants

In vitro-In vivo correlation (IVIVC) is a main focus of the pharmaceutical industry, academia and the regulatory sectors, as this is an effective modelling tool to predict drug product in vivo performance based on in vitro release data and serve as a surrogate for bioequivalence studies, significantly reducing the need for clinical studies. Till now, IVIVCs have not been successfully developed for in situ forming implants due to the significantly different in vitro and in vivo drug release profiles that are typically achieved for these dosage forms. This is not unexpected considering the unique complexity of the drug release mechanisms of these products. Using risperidone in situ forming implants as a model, the current work focuses on: 1) identification of critical attributes of in vitro release testing methods that may contribute to differences in in vitro and in vivo drug release from in situ forming implants; and 2) optimization of the in vitro release method, with the aim of developing Level A IVIVCs for risperidone implants. Dissolution methods based on a novel Teflon shape controlling adapter along with a water non-dissolvable glass fiber membrane (GF/F) instead of a water dissolvable PVA film (named as GF/F-Teflon adapter and PVA-Teflon adapter, respectively), and an in-house fabricated Glass slide adapter were used to investigate the impact of: the surface-to-volume ratio, water uptake ratio, phase separation rate (measured by NMP release in 24 h post injection in vitro or in vivo), and mechanical pressure on the drug release patterns. The surface-to-volume ratio and water uptake were shown to be more critical in vitro release testing method attributes compared to the phase separation rate and mechanical pressure. The Glass slide adapter-based dissolution method, which allowed for the formation of depots with bio-mimicking surface-to-volume ratios and sufficient water uptake, has the ability to generate bio-relevant degradation profiles as well as in vitro release profiles for risperidone implants. For the first time, a Level A IVIVC (rabbit model) has been successfully developed for in situ forming implants. Release data for implant formulations with slightly different PLGA molecular weights (MWs) were used to develop the IVIVC. The predictability of the model passed external validation using the reference listed drug (RLD), Perseris®. IVIVC could not be developed when formulations with different PLGA molar ratios of lactic acid to glycolic acid (L/G) were included. The present work provides a comprehensive understanding of the impact of the testing method attributes on drug release from in situ forming implants, which is a valuable practice for level A IVIVC development.

Rational formulation and industrial manufacturing of lipid-based complex injectables: Landmarks and trends

Lipid-based complex injectables are renowned for their effectiveness in delivering drugs, with many approved products. While significant strides have been made in formulating nanosystems for small molecular weight drugs, a pivotal breakthrough emerged with the recognition of lipid nanoparticles as a promising platform for delivering nucleic acids. This finding has paved the way for tackling long-standing challenges in molecular and delivery aspects (e.g., mRNA stability, intracellular delivery) that have impeded the clinical translation of gene therapy, especially in the realm of immunotherapy. Nonetheless, developing and implementing new lipid-based delivery systems pose significant challenges, as industrial manufacturing of these formulations often involves complex, multi-batch processes, giving rise to issues related to scalability, stability, sterility, and regulatory compliance. To overcome these obstacles, embracing the principles of quality-by-design (QbD) is imperative. Furthermore, adopting cutting-edge manufacturing and process analytical tools (PAT) that facilitate the transition from batch to continuous production is essential. Herein, the key milestones and insights derived from the development of currently approved lipid- nanosystems will be explored. Additionally, a comprehensive and critical overview of the latest technologies and regulatory guidelines that underpin the creation of more efficient, scalable, and flexible manufacturing processes for complex lipid-based nanoformulations will be provided.

Accelerated and Biopredictive In Vitro Release Testing Strategy for Single Agent and Combination Long-Acting Injectables

The purpose of this study was to develop an in vitro release testing (IVRT) strategy to predict the pre-clinical performance of single agent and combination long acting injectable (LAI) suspension products. Two accelerated IVRT methods were developed using USP apparatus 2 to characterize initial, intermediate, and terminal phases of drug release. Initial and intermediate phases were captured using a suspension cup with moderate agitation to ensure a constant, low surface area exposure of the LAI suspension to the release media. The terminal phase was obtained by exposing the LAI suspension to a high initial paddle speed. This resulted in smaller suspension particulates with high cumulative surface area that were dispersed throughout the release media, enabling rapid drug release. The in vitro release profiles obtained with these two methods in 48 h or less were independently time scaled to reflect the in vivo time scale of approximately 1800 h. Level-A in vitro in vivo correlations (IVIVCs) were separately developed for each method and active pharmaceutical ingredient (API) using in vivo absorption profiles obtained by deconvolution of rat plasma concentration-time profiles. The IVIVCs were successfully validated for each API. This work provides a framework for evaluating individual phases of drug release of complex LAIs to ultimately predict their in vivo performance.

Mechanisms and Barriers in Nanomedicine: Progress in the Field and Future Directions

In recent years, steady progress has been made in synthesizing and characterizing engineered nanoparticles, resulting in several approved drugs and multiple promising candidates in clinical trials. Regulatory agencies such as the Food and Drug Administration and the European Medicines Agency released important guidance documents facilitating nanoparticle-based drug product development, particularly in the context of liposomes and lipid-based carriers. Even with the progress achieved, it is clear that many barriers must still be overcome to accelerate translation into the clinic. At the recent conference workshop "Mechanisms and Barriers in Nanomedicine" in May 2023 in Colorado, U.S.A., leading experts discussed the formulation, physiological, immunological, regulatory, clinical, and educational barriers. This position paper invites open, unrestricted, nonproprietary discussion among senior faculty, young investigators, and students to trigger ideas and concepts to move the field forward.

Conventional vs Mechanistic IVIVC: A Comparative Study in Establishing Dissolution Safe Space for Extended Release Formulations

The use of in vitro-in vivo correlation (IVIVC) for extended release oral dosage forms is an important technique that can avoid potential clinical studies. IVIVC has been a topic of discussion over the past two decades since the inception of USFDA guidance. It has been routinely used for biowaivers, establishment of dissolution safe space and clinically relevant dissolution specifications, for supporting site transfers, scale-up and post approval changes. Although conventional or mathematical IVIVC is routinely used, other approach such as mechanistic IVIVC can be of attractive choice as it integrates all the physiological aspects. In the present study, we have performed comparative evaluation of mechanistic and conventional IVIVC for establishment of dissolution safe space using divalproex sodium and tofacitinib extended release formulations as case examples. Conventional IVIVC was established using Phoenix and mechanistic IVIVC was set up using Gastroplus physiologically based biopharmaceutics model (PBBM). Virtual dissolution profiles with varying release rates were constructed around target dissolution profile using Weibull function. After internal and external validation, the virtual dissolution profiles were integrated into mechanistic and conventional IVIVC and safe space was established by absolute error and T/R ratio's methods. The results suggest that mechanistic IVIVC yielded wider safe space as compared to conventional IVIVC. The results suggest that a mechanistic approach of establishing IVIVC may be a flexible approach as it integrates physiological aspects. These findings suggest that mechanistic IVIVC has wider potential as compared to conventional IVIVC to gain wider dissolution safe space and thus can avoid potential clinical studies.

Understanding the In Vitro-In Vivo Nexus: Advanced correlation models predict clinical performance of liposomal doxorubicin

In the century of precision medicine and predictive modeling, addressing quality-related issues in the medical supply chain is critical, with 62 % of the disruptions being attributable to quality challenges. This study centers on the development and safety of liposomal doxorubicin, where animal studies alone often do not adequately explain the complex interplay between critical quality attributes and in vivo performances. Anchored in our aim to elucidate this in vitro-in vivo nexus, we compared TLD-1, a novel liposomal doxorubicin delivery system, against the established formulations Doxil® and Lipodox®. Robust in vitro-in vivo correlations (IVIVCs) with excellent coefficients of determination (R2 > 0.98) were obtained in the presence of serum under dynamic high-shear conditions. They provided the foundation for an advanced characterization and benchmarking strategy. Despite the smaller vesicle size and reduced core crystallinity of TLD-1, its release behavior closely resembled that of Doxil®. Nevertheless, subtle differences between the dosage forms observed in the in vitro setting were reflected in the bioavailabilities observed in vivo. Data from a Phase-I clinical trial facilitated the development of patient-specific IVIVCs using the physiologically-based nanocarrier biopharmaceutics model, enabling a more accurate estimation of doxorubicin exposure. This advancement could impact clinical practice by allowing for more precise dose estimation and aiding in the assessment of the interchangeability of generic liposomal doxorubicin.

Sustained release local anesthetics for pain management: relevance and formulation approaches

This review attempted to ascertain the rationale for the formulation of sustained-release local anesthetics and summarize the various formulation approaches designed to date to achieve sustained and localized local analgesic effects. The incidence of pain, which is the concern of patients as well as health care professionals, is increasing due to accidents, surgical procedures, and other diseases. Local anesthetics can be used for the management of moderate to severe acute and chronic pain. They also allow regional analgesia, in situations where the cause and source of the pain are limited to a particular site or region, without the need for loss of consciousness or systemic administration of other analgesics thereby decreasing the risk of potential toxicities. Though they have an interesting antipain efficacy, the short duration of action of local anesthetics makes the need for their multiple injections or opioid adjuvants mandatory. To overcome this problem, different formulations are being designed that help achieve prolonged analgesia with a single dose of administration. Combination with adjuvants, liposomal formulations, lipid-based nanoparticles, thermo-responsive nanogels, microspheres, microcapsules, complexation with multivalent counterions and HP-β-CD, lipid-based nanoparticles, and bio-adhesive films, and polymeric matrices are among the approaches. Further safety studies are required to ensure the safe and effective utilization of sustained-release local anesthetics. Moreover, the release kinetics of the various formulations should be adequately established.

Long acting tariquidar loaded stearic acid-modified hydroxyapatite enhances brain penetration and antitumor effect of temozolomide

Temozolomide (TMZ) is the first line chemotherapy for glioblastoma (GBM) treatment, but the P-glycoprotein (P-gp) expressed in blood-brain barrier (BBB) will pump out TMZ from the brain leading to decreased TMZ concentration. Tariquidar (TQD), a selective and potent P-gp inhibitor, may be suitable for combination therapy to increase concentration of TMZ in brain. Hydroxyapatite (HAP) is a biodegradable material with sustained release characteristics, and stearic acid surface-modified HAP (SA-HAP) can increase hydrophobicity to facilitate TQD loading. TQD-loaded stearic acid surface-modified HAP (SA-HAP-TQD) was prepared with optimal size and high TQD loading efficiency, and in vitro release and cellular uptake of SA-HAP-TQD showed that SA-HAP-TQD were taken up into lysosome and continuously released TQD from macrophages. In vivo studies have found that over 70 % of SA-HAP was degraded and 80 % of TQD was released from SA-HAP-TQD 28 days after administration. SA-HAP-TQD could increase brain penetration of TMZ, but it would not enhance adverse effects of TMZ in healthy mice. SA-HAP-TQD and TMZ combination had longer median survival than TMZ single therapy in GL261 orthotopic model. These results suggest that SA-HAP-TQD has sustained release characteristics and are potential for improving antitumor effect with TMZ treatment.

An Ultrasoft and Flexible PDMS-Based Balloon-Type Implantable Device for Controlled Drug Delivery

Non-biodegradable implants have undergone extensive investigation as drug delivery devices to enable advanced healthcare toward personalized medicine. However, fibroblast encapsulation is one of the major challenges in all non-biodegradable implants, besides other challenges such as high initial burst, risk of membrane rupture, high onset time, non-conformal contact with tissues, and tissue damage. To tackle such challenges, we propose a novel ultrasoft and flexible balloon-type drug delivery device for unidirectional and long-term controlled release. The ultrasoft balloon-type device (USBD) was fabricated by using selective bonding between 2 polydimethylsiloxane (PDMS) membranes and injecting a fluid into the non-bonded area between them. The balloon acted as a reservoir containing a liquid drug, and at the same time, the membrane of the balloon itself acted as the pathway for release based on diffusion. The release was modulated by tuning the thickness and composition of the PDMS membrane. Regardless of the thickness and composition, all devices exhibited zero-order release behavior. The longest zero-order release and nearly zero-order release were achieved for 30 days and 58 days at a release rate of 1.16 μg/day and 1.68 μg/day, respectively. In vivo evaluation was performed for 35 days in living rats, where the USBD maintained zero-order and nearly zero-order release for 28 days and 35 days, respectively. Thanks to the employment of ultrasoft and flexible membranes and device design, the USBD could achieve minimal tissue damage and foreign body responses. It is expected that the proposed device may provide a novel approach for long-term drug delivery with new therapeutic modalities.

An empirical predictive model for determining the aqueous solubility of BCS class IV drugs in amorphous solid dispersions

CONTEXT

Determining solubility of drugs is laborious and time-consuming process that may not yield meaningful results. Amorphous solid dispersion (ASD) is a widely used solubility enhancement technique. Predictive models could streamline this process and accelerate the development of oral drugs with improved aqueous solubilities.

OBJECTIVE

This study aimed to develop a predictive model to estimate the solubility of a compound from the ASDs in polymer matrices.

METHODS

ASDs of model drugs (acetazolamide, chlorothiazide, furosemide, hydrochlorothiazide, sulfamethoxazole) with model polymers (PVP, PVPVA, HPMC E5, Soluplus) and a surfactant (TPGS) were prepared using hotmelt process. The prepared ASDs were characterized using DSC, FTIR, and XRD. The aqueous solubility of the model drugs was determined using shake-flask method. Multiple linear regression was used to develop a predictive model to determine aqueous solubility using the molecular descriptors of the drug and polymer as predictor variables. The model was validated using Leave-One-Out Cross-Validation.

RESULTS

The ASDs' drug components were identified as amorphous via DSC and XRD Studies. There were no significant chemical interactions between the model drugs and the polymers based on FTIR studies. The ASDs showed a significant (p < 0.05) improvement in solubility, ranging from a 3-fold to 118-fold, compared with the pure drug. The developed empirical model predicted the solubility of the model drugs from the ASDs containing model polymer matrices with an accuracy greater than 80%.

CONCLUSION

The developed empirical model demonstrated robustness and predicted the aqueous solubility of model drugs from the ASDs of model polymer matrices with an accuracy greater than 80%.

Future Nanotechnology-Based Strategies for Improved Management of Helicobacter pylori Infection

Helicobacter pylori (H. pylori) is a recalcitrant pathogen, which can cause gastric disorders. During the past decades, polypharmacy-based regimens, such as triple and quadruple therapies have been widely used against H. pylori. However, polyantibiotic therapies can disturb the host gastric/gut microbiota and lead to antibiotic resistance. Thus, simpler but more effective approaches should be developed. Here, some recent advances in nanostructured drug delivery systems to treat H. pylori infection are summarized. Also, for the first time, a drug release paradigm is proposed to prevent H. pylori antibiotic resistance along with an IVIVC model in order to connect the drug release profile with a reduction in bacterial colony counts. Then, local delivery systems including mucoadhesive, mucopenetrating, and cytoadhesive nanobiomaterials are discussed in the battle against H. pylori infection. Afterward, engineered delivery platforms including polymer-coated nanoemulsions and polymer-coated nanoliposomes are poposed. These bioinspired platforms can contain an antimicrobial agent enclosed within smart multifunctional nanoformulations. These bioplatforms can prevent the development of antibiotic resistance, as well as specifically killing H. pylori with no or only slight negative effects on the host gastrointestinal microbiota. Finally, the essential checkpoints that should be passed to confirm the potential effectiveness of anti-H. pylori nanosystems are discussed.

In vitro to in vivo extrapolation for predicting human equivalent dose of phenolic endocrine disrupting chemicals: PBTK model development, biological pathways, outcomes and performance

In vitro to in vivo (IVIVE) leverages in vitro high-throughput biological responses to predict the corresponding in vivo exposures and further estimate the human safe dose. However, for phenolic endocrine disrupting chemicals (EDCs) linked with complicated biological pathways and adverse outcomes (AO), such as bisphenol A (BPA) and 4-nonylphenol (4-NP), plausible estimation of human equivalent doses (HED) by IVIVE approaches considering various biological pathways and endpoints is still challenging. To explore the capabilities and limitations of IVIVE, this study conducted physiologically based toxicokinetic (PBTK)-IVIVE approaches to derive pathway-specific HEDs using BPA and 4-NP as examples. In vitro HEDs of BPA and 4-NP varied in different adverse outcomes, pathways, and testing endpoints and ranged from 0.0013 to 1.0986 mg/kg bw/day and 0.0551 to 1.7483 mg/kg bw/day, respectively. In vitro HEDs associated with reproductive AOs initiated by PPARα activation and ER agonism were the most sensitive. Model verification suggested the potential of using effective in vitro data to determine reasonable approximation of in vivo HEDs for the same AO (fold differences of most AOs ranged in 0.14-2.74 and better predictions for apical endpoints). Furthermore, system-specific parameters of cardiac output and its fraction, body weight, as well as chemical-specific parameters of partition coefficient and liver metabolic were most sensitive for the PBTK simulations. The results indicated that the application of fit for-purpose PBTK-IVIVE approach could provide credible pathway-specific HEDs and contribute to high throughput prioritization of chemicals in a more realistic scenario.

Recent Studies of Artificial Intelligence on In Silico Drug Absorption

Absorption is an important area of research in pharmacochemistry and drug development, because the drug has to be absorbed before any drug effects can occur. Furthermore, the ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) profile of drugs can be directly and considerably altered by modulating factors affecting absorption. Many drugs in development fail because of poor absorption. The research and continuous efforts of researchers in recent years have brought many successes and promises in drug absorption property prediction, especially in silico, which helps to reduce the time and cost significantly for screening undesirable drug candidates. In this report, we explicitly provide an overview of recent in silico studies on predicting absorption properties, especially from 2019 to the present, using artificial intelligence. Additionally, we have collected and investigated public databases that support absorption prediction research. On those grounds, we also proposed the challenges and development directions of absorption prediction in the future. We hope this review can provide researchers with valuable guidelines on absorption prediction to facilitate the development of newer approaches in drug discovery.

Pressure-Spun Fibrous Surgical Sutures for Localized Antibacterial Delivery: Development, Characterization, and In Vitro Evaluation

Surgical sutures designed to prevent infection are critical in addressing antibiotic-resistant pathogens that cause surgical site infections. Instead of antibiotics, alternative materials such as biocides have been assessed for coating commercially used sutures due to emerging antibiotic resistance concerns worldwide. This study has a new approach to the development of fibrous surgical sutures with the ability to deliver localized antibacterial agents. A new manufacturing process based on pressure spinning was used for the first time in the production of fibrous surgical sutures by physically blending antibacterial triclosan (Tri) agent with poly(lactic-co-glycolic acid) (PLGA) and poly(ethylene oxide) (PEO) polymers. Fibrous surgical sutures with virgin PLGA, virgin PEO, different ratios of PLGA-PEO, and different ratios of Tri-loaded PLGA-PEO fibrous sutures were produced to mimic the FDA- and NICE-approved PLGA-based sutures available in the market and compared for their characteristics. They were also tested simultaneously with commercially available sutures to compare their in vitro biodegradation, antibacterial, drug release, and cytotoxicity properties. After in vitro antibacterial testing for 24 h, sutures having 285 ± 12 μg/mg Tri loading were selected as a model for further testing as they exhibited antibacterial activity against all tested bacteria strains. The selected model of antibacterial fibrous sutures exhibited an initial burst of Tri release within 24 h, followed by a sustained release for the remaining time until the sutures completely degraded within 21 days. The cell viability assay showed that these surgical sutures had no cytotoxic effect on mammalian cells.

Recent advances in lipid-based long-acting injectable depot formulations

Long-acting injectable (LAIs) delivery systems sustain the drug therapeutic action in the body, resulting in reduced dosage regimen, toxicity, and improved patient compliance. Lipid-based depots are biocompatible, provide extended drug release, and improve drug stability, making them suitable for systemic and localized treatment of various chronic ailments, including psychosis, diabetes, hormonal disorders, arthritis, ocular diseases, and cancer. These depots include oil solutions, suspensions, oleogels, liquid crystalline systems, liposomes, solid lipid nanoparticles, nanostructured lipid carriers, phospholipid phase separation gel, vesicular phospholipid gel etc. This review summarizes recent advancements in lipid-based LAIs for delivering small and macromolecules, and their potential in managing chronic diseases. It also provides an overview of the lipid depots available in market or clinical phase, as well as patents for lipid-based LAIs. Furthermore, this review critically discusses the current scenario of using in vitro release methods to establish IVIVC and highlights the challenges involved in developing lipid-based LAIs.

Revisiting the in-vitro and in-vivo considerations for in-silico modelling of complex injectable drug products

Complex injectable drug products (CIDPs) have often been developed to modulate the pharmacokinetics along with efficacy for therapeutic agents used for remediation of chronic disorders. The effective development of CIDPs has exhibited complex kinetics associated with multiphasic drug release from the prepared formulations. Consequently, predictability of pharmacokinetic modelling for such CIDPs has been difficult and there is need for advanced complex computational models for the establishment of accurate prediction models for in-vitro-in-vivo correlation (IVIVC). The computational modelling aims at supplementing the existing knowledge with mathematical equations to develop formulation strategies for generation of predictable and discriminatory IVIVC. Such an approach would help in reduction of the burden of effect of hidden factors on preclinical to clinical translations. Computational tools like physiologically based pharmacokinetics (PBPK) modelling have combined physicochemical and physiological properties along with IVIVC characteristics of clinically used formulations. Such techniques have helped in prediction and understanding of variability in pharmacodynamic parameters of potential generic products to clinically used formulations like Doxil®, Ambisome®, Abraxane® in healthy and diseased population using mathematical equations. The current review highlights the important formulation characteristics, in-vitro, preclinical in-vivo aspects which need to be considered while developing a stimulatory predictive PBPK model in establishment of an IVIVC and in-vitro-in-vivo relationship (IVIVR).

A Perspective on Model-Informed IVIVC for Development of Subcutaneous Injectables

Subcutaneously administered drugs are growing in popularity for both large and small molecule drugs. However, development of these systems - particularly generics - is slowed due to a lack of formal guidance regarding preclinical testing and in vitro - in vivo correlations (IVIVC). Many of these methods, while appropriate for oral drugs, may not be optimized for the complex injection site physiologies, and release rate and absorption mechanisms of subcutaneous drugs. Current limitations for formulation design and IVIVC can be supported by implementing mechanistic, computational methods. These methods can help to inform drug development by identifying key drug and formulation attributes, and their effects on drug release rates. This perspective, therefore, addresses current guidelines in place for oral IVIVC development, how they may differ for subcutaneously administered compounds, and how modeling and simulation can be implemented to inform design of these products. As such, integration of modeling and simulation with current IVIVC systems can help in driving the development of subcutaneous injectables.

Long-acting PLGA microspheres: advances in excipient and product analysis toward improved product understanding

Poly(lactic-co-glycolic acid) (PLGA) microspheres are a sustained-release drug delivery system with several successful commercial products used for the treatment of a variety of diseases. By utilizing PLGA polymers with different compositions, therapeutic agents can be released over durations varying from several weeks to several months. However, precise quality control of PLGA polymers and a fundamental understanding of all the factors associated with the performance of PLGA microsphere formulations remains challenging. This knowledge gap can hinder product development of both innovator and generic products. In this review, variability of the key release controlling excipient (PLGA), as well as advanced physicochemical characterization techniques for the PLGA polymer and PLGA microspheres are discussed. The relative merits and challenges of different in vitro release testing methods, in vivo pharmacokinetic studies, and in vitro-in vivo correlation development are also summarized. This review is intended to provide an in-depth understanding of long-acting microsphere products and consequently facilitate the development of these complex products.

Liquid Chromatography-Electrospray Ionization Tandem Mass Spectrometry Estimation of Quercetin-Loaded Nanoemulsion in Rabbit Plasma: In Vivo-In Silico Pharmacokinetic Analysis Using GastroPlus

In the present study, we developed and validated a rapid, specific, sensitive, and reproducible liquid chromatography-electrospray ionization tandem mass spectrometry method for quantifying quercetin (QT) in rabbit plasma using hydrochlorothiazide as the internal standard. Animals were orally administered with optimized QT-loaded nanoemulsion (QTNE) and QT suspension (QTS), equivalent to 30 mg/kg, to the test and control group, respectively. The blood samples were collected at pre-determined time points up to 48 h. The linearity range was from 5 to 5000 ng mL^-1 with R ² = 0.995. Further, we analyzed the various pharmacokinetic parameters and established the in vitro-in vivo correlation (IVIVC) of QTNE using GastroPlus software. The method was successfully developed and validated, and when applied for the determination of QT in rabbit plasma, it exhibited an increase in C _max from 122.56 ng mL^-1 (QTS) to 286.51 ng mL^-1 (QTNE) (2.34-fold) and AUC_0-48 from 976 ng h mL^-1 (QTS) to 4249 ng h mL^-1 (QTNE) (4.35-fold), indicating improved oral bioavailability QT when administered as QTNE. Statistical analysis revealed that the Loo-Riegelman method (two-compartmental method) best fitted the deconvolution approach (R ² = 0.998, SEP = 4.537, MAE = 2.759, and AIC = 42.38) for establishing the IVIVC. In conclusion, the established bioanalytical method and IVIVC studies revealed that QTNE is a potential carrier for the effective delivery of QT with enhanced oral bioavailability.

Computational Model of In Vivo Corneal Pharmacokinetics and Pharmacodynamics of Topically Administered Ophthalmic Drug Products

INTRODUCTION

Although the eye is directly accessible on the surface of the human body, drug delivery can be extremely challenging due to the presence of multiple protective barriers in eye tissues. Researchers have developed complex formulation strategies to overcome these barriers to ophthalmic drug delivery. Current development strategies rely heavily on in vitro experiments and animal testing to predict human pharmacokinetics (PK) and pharmacodynamics (PD).

OBJECTIVE

The primary objective of the study was to develop a high-fidelity PK/PD model of the anterior eye for topical application of ophthalmic drug products.

METHODS

Here, we present a physiologically-based in silico approach to predicting PK and PD in rabbits after topical administration of ophthalmic products. A first-principles based approach was used to describe timolol dissolution, transport, and distribution, including consideration of ionized transport, following topical instillation of a timolol suspension.

RESULTS

Using literature transport and response parameters, the computational model described well the concentration-time and response-time profiles in rabbit. Comparison of validated rabbit model results and extrapolated human model results demonstrate observable differences in the distribution of timolol at multiple time points.

CONCLUSION

This modeling framework provides a tool for model-based prediction of PK in eye tissues and PD after topical ophthalmic drug administration to the eyes.

Donepezil accelerates the release of PLGA microparticles via catalyzing the polymer degradation regardless of the end groups and molecular weights

Poly (lactic-co-glycolic acid) (PLGA) is one of the most successful polymers for sustained parenteral drug products in the market. However, rational selection of PLGA in the formulations is still challenging due to the lack of fundamental studies. The present study aimed to investigate the influence of donepezil (DP) on the in-vitro and in-vivo performance of PLGA sustained microspheres. Three kinds of PLGAs with different end groups and molecular weights were selected. Then DP-loaded PLGA microspheres (DP-MSs) with similar particle size, drug loading, and encapsulation efficiency were prepared using an o/w emulsion-solvent evaporation method. Laser diffraction and scanning electron microscopy showed that the prepared DP-MSs were about 35 μm and spherical in shape. Differential scanning calorimetry and X-ray diffraction indicated that DP was in an amorphous state inside the microspheres. Unexpectedly, the molecular weight and end group of PLGAs did not significantly influence the in-vitro and in-vivo performance of the DP-MSs. The gel permeation chromatography indicated that the degradation rates of PLGAs were accelerated with the incorporation of DP into the microspheres, and the molecular weight of all three kinds of PLGAs sharply dropped to about 11,000 Da within the initial three days. The basic catalysis effect induced by DP might be responsible for the accelerated degradation of PLGAs, which led to similar in-vitro release profiles of DP from different PLGA matrices. A point-to-point level A correlation between the in-vitro release and the in-vivo absorption was observed, which confirmed the accelerated release of DP from the DP-MSs in-vivo. The results indicated that the influence of DP on the degradation of PLGA should be considered when developing DP-sustained microspheres.

In Vitro-In Vivo Correlations (IVIVC) for Predicting the Clinical Performance of Metronidazole Topical Creams Intended for Local Action

The safety and efficacy of a generic medicine can be confirmed by demonstrating bioequivalence (BE) between the generic product and its reference listed drug (RLD) by measuring drug concentrations in the blood following administration. However, for topical dermatological products that are not absorbed into the systemic circulation, clinical trials in patients are required. The objective of this investigation was to use an in vitro method to predict in vivo performance by correlating in vitro release testing (IVRT) data with tape stripping (TS) data following the application of metronidazole (MTZ) creams to the skin of healthy human participants. Whereas IVRT is generally used to characterize the release of a drug from topical products across a synthetic membrane into a suitable receptor medium, TS involves the sequential removal of layers of stratum corneum (SC) with an adhesive tape to determine the amount of the drug in the skin. The resulting IVRT and TS data were correlated using the IVRT parameter of the apparent release constant (ARC), which is the slope obtained from the release rate profile, with the TS parameter of the area under the curve (AUC) obtained from a plot of the amount of drug per tape strip vs. the relative SC depth. A rank order relationship for these parameters was established for the reference and test products. A graph of AUC vs. ARC was plotted to establish a Level C in vitro-in vivo correlation (IVIVC). Although the ARC for T₁ was slightly lower than that for the reference, the rank order was essentially consistent. A linear relationship was observed between the AUCs and ARCs. The equation derived was used to predict the AUCs for all the tested products based on their respective ARCs. The predicted AUC values based on the observed ARCs were similar to the observed AUCs. The lower and upper limits for the in vitro and in vivo parameters for BE were computed based on regulatory acceptance criteria. In order to predict BE from the IVRT studies, the values of the ARC should be between 30.50 and 47.67 when comparing test and reference cream products containing MTZ.

Polyhexanide-Releasing Membranes for Antimicrobial Wound Dressings: A Critical Review

The prevalence of chronic, non-healing skin wounds in the general population, most notably diabetic foot ulcers, venous leg ulcers and pressure ulcers, is approximately 2% and is expected to increase, driven mostly by the aging population and the steady rise in obesity and diabetes. Non-healing wounds often become infected, increasing the risk of life-threatening complications, which poses a significant socioeconomic burden. Aiming at the improved management of infected wounds, a variety of wound dressings that incorporate antimicrobials (AMDs), namely polyhexanide (poly(hexamethylene biguanide); PHMB), have been introduced in the wound-care market. However, many wound-care professionals agree that none of these wound dressings show comprehensive or optimal antimicrobial activity. This manuscript summarizes and discusses studies on PHMB-releasing membranes (PRMs) for wound dressings, detailing their preparation, physical properties that are relevant to the context of AMDs, drug loading and release, antibacterial activity, biocompatibility, wound-healing capacity, and clinical trials conducted. Some of these PRMs were able to improve wound healing in in vivo models, with no associated cytotoxicity, but significant differences in study design make it difficult to compare overall efficacies. It is hoped that this review, which includes, whenever available, international standards for testing AMDs, will provide a framework for future studies.

Long-acting intrauterine systems: Recent advances, current challenges, and future opportunities

Levonorgestrel intrauterine systems (LNG-IUSs) are complex drug-device combination products designed to release a hormonal contraceptive drug for up to 7 years. These drug delivery systems offers a great promise as a modern method of long-acting reversible contraceptives (LARCs) to improve women's health. Unfortunately, there are some scientific challenges associated with the development of these products which are among the major reasons contributing to the availability of relatively few IUS products on the market. This review summarizes the formulation considerations (drug and excipient attributes), manufacturing methods, advances in characterization and in vitro drug release testing of IUSs, as well as factors influencing drug release from IUSs. A critical discussion on the major challenges to IUS product development is presented. Specifically, insights on bioequivalence evaluation, in vitro-in vivo correlation (IVIVC) establishment, and regulatory challenges are detailed. Lastly, methodological tools to overcome some of these hurdles to product development are proposed. The knowledge furnished through this review will be helpful towards obtaining better product understanding. Such understanding will facilitate the development of these complex drug products, as well as their regulatory approval process.

User-designed device with programmable release profile for localized treatment

Three-dimensional printing enables precise and on-demand manufacture of customizable drug delivery systems to advance healthcare toward the goal of personalized medicine. However, major challenges remain in realizing personalized drug delivery that fits a patient-specific drug dosing schedule using local drug delivery systems. In this study, a user-designed device is developed as implantable therapeutics that can realize personalized drug release kinetics by programming the inner structural design on the microscale. The drug release kinetics required for various treatments, including dose-dense therapy and combination therapy, can be implemented by controlling the dosage and combination of drugs along with the rate, duration, initiation time, and time interval of drug release according to the device layer design. After implantation of the capsular device in mice, the in vitro-in vivo and pharmacokinetic evaluation of the device is performed, and the therapeutic effect of the developed device is achieved through the local release of doxorubicin. The developed user-designed device provides a novel platform for developing next-generation drug delivery systems for personalized and localized therapy.

IVIVC of Octreotide in PLGA-Glucose Microsphere Formulation, Sandostatin® LAR

In vitro-in vivo correlation (IVIVC) analysis reveals a relationship between in vitro release and in vivo pharmacokinetic response of the drug of interest. Sandostatin LAR Depot (SLD) for endocrine tumors and acromegaly is a sustained-release formulation of octreotide, a cyclic oligomer of 8 amino acids, which prolongs therapeutic efficacy and enhances medication compliance of octreotide. Since the efficacy of SLD is dependent on the pharmacokinetic characteristics of octreotide released from a biodegradable matrix polymer, poly(lactide-co-glycolide)-glucose, of SLD, the IVIVC of SLD is critical for predicting an in vivo behavior of the octreotide. In this study, in vitro release of octreotide from SLD was investigated using the release test media each containing 0.02% or 0.5% surfactant and having different pH values of 7.4 and 5.5. In vivo pharmacokinetic profiles of SLD were determined by LC-MS/MS analysis of the systemic blood concentration of octreotide after the SLD injection to rodents. In IVIVC analysis, the Weibull model was adopted as a drug release model for biodegradable microsphere formulation. The IVIVC analyses revealed the in vitro release test condition of SLD with the highest IVIV correlation coefficient. By applying the in vitro release data to the model derived from the IVIVC analysis, pharmacokinetic parameters of SLD could be predicted with the prediction error of ± 10 ~ 15%. IVIVC analysis and pharmacokinetic prediction model of SLD in our study can be an efficient tool for the development of long-acting pharmaceutical dosage forms.

Regulatory Science Approach in Pharmaceutical Development of Follow-On Versions of Non-Biological Complex Drug Products

Scientific and technological breakthroughs in the field of Nanotechnology have been a driving force throughout the development and approval of Non-Biological Complex Drugs (NBCDs). However, the fast-growing expansion of NBCDs and the emergence of their follow-on versions have brought with them several scientific, technological, and regulatory challenges. The definition of NBCDs is still not officially recognized by the regulatory authorities, and there is no dedicated regulatory pathway addressing the particular features of NBCDs and their follow-on versions. The lack of clear and consistent regulatory guidance documents in this field, as well as, the inconsistency across different regulatory agencies, impact negatively on the acceptance and enormous potential of these drug products. Patient access to high-quality NBCDs follow-on versions may be compromised by regulatory uncertainty resulting from the use of different regulatory approaches across the globe, as well as within the same class of products. Accordingly, there is a real need to develop a specific regulatory pathway compliant with the complexity of NBCDs and their follow-on versions or, alternatively, make better use of available regulatory pathways. The main goal of the review is to deeply investigate and provide a critical overview of the regulatory landscape of NBCDs and follow-on versions currently adopted by the regulatory authorities. The dissemination of knowledge and discussion in this field can contribute to clarifying regulations, policies, and regulatory approaches to complex generics, thereby filling regulatory and scientific gaps in the establishment of therapeutic equivalence.

Polymer source affects in vitro-in vivo correlation of leuprolide acetate PLGA microspheres

Poly(lactic-co-glycolic acid) PLGA (release controlling excipient) plays a dominant role on the performance of PLGA based long-acting parenterals. These types of drug products typically exhibit complex multi-phasic in vitro/in vivo release/absorption characteristics. In particular, owing to their large size, charged state, and hydrophilicity, peptide loaded microspheres can exhibit more complex release mechanisms. Accordingly, it is challenging to develop Level A in vitro-in vivo correlations (IVIVCs) for such complex long-acting parenterals. With the objective of gaining a better understanding of how to achieve IVIVCs for peptide loaded PLGA microspheres, formulations with similar as well as different release characteristics were prepared with PLGAs from different sources. Leuprolide acetate was selected as the model drug. Owning to the different physicochemical properties of the PLGAs (such as inherent viscosity, molecular weight and blockiness), the formulations exhibited significant differences in their critical quality attributes (such as particle size, porosity and pore size) and consequently had different in vitro and in vivo performance. Affirmative conventional IVIVCs were developed that were able to predict the in vivo performance using the corresponding in vitro release profiles. In addition, the developed conventional IVIVCs were able to discriminate between formulations with comparable in vitro/in vivo performance and those that had dissimilar in vitro/in vivo performance. The present work provides a comprehensive understanding of the influence of PLGA source variations on IVIVC development and predictability for peptide loaded PLGA microspheres.

The industrial design, translation, and development strategies for long-acting peptide delivery

INTRODUCTION

Peptides are widely recognized as therapeutic agents in the treatment of a wide range of diseases, such as cancer, diabetes etc. However, their use has been limited by their short half-life, due to significant metabolism by exo- and endo-peptidases as well as their inherent poor physical and chemical stability. Research with the aim of improving their half-life in the body, and thus improving patient compliance (by decreasing the frequency of injections) has gained significant attention.

AREAS COVERED

This review outlines the current landscape and industrial approaches to achieve extended peptide exposure and reduce dosing frequency. Emphasis is placed on identifying challenges in drug product manufacturing and desirable critical quality attributes that are essential for activity and safety, providing insights into chemistry and design aspects impacting peptide release, and summarizing important considerations for CMC developability assessments of sustained release peptide drugs.

EXPERT OPINION

Bring the patient and disease perspective early into development. Substantial advances have been made in the field of sustained delivery of peptides despite their complexity. The article will also highlight considerations for early-stage product design and development, providing an industrial perspective on risk mitigation in developing sustained release peptide drug products.

In vitro-in vivo correlation of PLGA microspheres: Effect of polymer source variation and temperature

Development of Level A in vitro-in vivo correlations (IVIVCs) remains challenging for complex long-acting parenterals, such as poly(lactic-co-glycolic acid) PLGA microspheres. The nature of the PLGA polymer excipient has a dominant influence on the performance of PLGA microspheres. These microsphere systems typically exhibit multiphasic in vitro/in vivo release/absorption characteristics and may also show interspecies differences (animal model versus human data). These issues contribute to the difficulties in the development of IVIVCs for PLGA microsphere systems. To gain a better understanding of how to achieve IVIVCs for PLGA microspheres, microsphere formulations with similar as well as different release characteristics were prepared using PLGAs from different sources. Efforts were then made to establish IVIVCs for these formulations using in vitro release profiles obtained at both 37°C (human body temperature) and 39°C (rabbit body temperature) with in vivo data obtained from an animal model (rabbit). Risperidone was selected as the model drug; microsphere formulations were prepared under the same processing methods using apparently similar PLGAs from different sources. Owning to the different physicochemical properties of the PLGAs (such as inherent viscosity, monomer ratio (L/G ratio) and blockiness), the formulations exhibited significant differences in critical quality attributes (such as particle size, particle size distribution, porosity and pore size) and consequently had different in vitro and in vivo performance. IVIVCs were developed and it was shown that model predictability improved when IVIVCs were established using those formulations with comparable release characteristics. In addition, IVIVCs were established with T_scaling factors close to 1 using in vitro release profiles acquired at 39°C, emphasizing the importance of considering the body temperature in understanding interspecies differences. The present work provides a comprehensive understanding of the impact of the PLGA source variation on IVIVC development and predictability for complex long-acting parenterals such as PLGA microspheres.

Development and Use of an Ex-Vivo In-Vivo Correlation to Predict Antiepileptic Drug Clearance in Patients Undergoing Continuous Renal Replacement Therapy

OBJECTIVES

Results from previous ex-vivo continuous renal replacement therapy (CRRT) models have successfully demonstrated similar extraction coefficients (EC) identified from in-vivo clinical trials. The objectives of this study are to develop an ex-vivo in-vivo correlation (EVIVC) model to predict drug clearance for commonly used antiepileptics and to evaluate similarity in drug extraction across different CRRT modalities to extrapolate dosing recommendations.

METHODS

Levetiracetam, lacosamide, and phenytoin CRRT clearance was evaluated using the Prismaflex CRRT system and M150 hemodiafilters using an albumin containing normal saline (ALB-NS) vehicle with 3 different albumin concentrations (2 g/dL, 3 g/dL, and 4 g/dL) and a human plasma vehicle at 3 different effluent flow rates (1 L/hr, 2 L/hr, and 3 L/hr). Blood and effluent/dialysate concentrations were collected after circuit priming. ECs were calculated for each drug, modality, vehicle, and experimental arm combination.

RESULTS

The calculated average EC for levetiracetam and lacosamide was approximated to the fraction unbound from plasma protein. Human plasma and ALB-NS vehicles demonstrated adequate prediction of in-vivo CRRT clearance. Geometric mean ratios indicated similarity in extraction coefficients when comparing between hemofiltration and hemodiafiltration modalities and between filtration and dialysis modalities at effluent flow rates ≤ 2L/hr. Evaluation of phenytoin provided inconsistent findings with regards to extraction coefficient similarity across different CRRT modalities.

CONCLUSION

The findings indicate that an ex-vivo study can be used as a surrogate to predict in-vivo levetiracetam and lacosamide clearance in patients receiving CRRT.

Rationale utilization of phospholipid excipients: a distinctive tool for progressing state of the art in research of emerging drug carriers

Phospholipids have a high degree of biocompatibility and are deemed ideal pharmaceutical excipients in the development of lipid-based drug delivery systems, because of their unique features (permeation, solubility enhancer, emulsion stabilizer, micelle forming agent, and the key excipients in solid dispersions) they can be used in a variety of pharmaceutical drug delivery systems, such as liposomes, phytosomes, solid lipid nanoparticles, etc. The primary usage of phospholipids in a colloidal pharmaceutical formulation is to enhance the drug's bioavailability with low aqueous solubility [i.e. Biopharmaceutical Classification System (BCS) Class II drugs], Membrane penetration (i.e. BCS Class III drugs), drug uptake and release enhancement or modification, protection of sensitive active pharmaceutical ingredients (APIs) from gastrointestinal degradation, a decrease of gastrointestinal adverse effects, and even masking of the bitter taste of orally delivered drugs are other uses. Phospholipid-based colloidal drug products can be tailored to address a wide variety of product requirements, including administration methods, cost, product stability, toxicity, and efficacy. Such formulations that are also a cost-effective method for developing medications for topical, oral, pulmonary, or parenteral administration. The originality of this review work is that we comprehensively evaluated the unique properties and special aspects of phospholipids and summarized how the individual phospholipids can be utilized in various types of lipid-based drug delivery systems, as well as listing newly marketed lipid-based products, patents, and continuing clinical trials of phospholipid-based therapeutic products. This review would be helpful for researchers responsible for formulation development and research into novel colloidal phospholipid-based drug delivery systems.

Current trends in PLGA based long-acting injectable products: The industry perspective

INTRODUCTION

Poly (lactic-co-glycolic acid) (PLGA) has been used in many long-acting drug formulations, which have been approved by the US Food and Drug Administration (FDA). PLGA has unique physicochemical properties, which results in complexities in the formulation, characterization, and evaluation of generic products. To address the challenges of generic development of PLGA-based products, the FDA has established an extensive research program to investigate novel methods and tools to aid product development and regulatory review.

AREAS COVERED

This review article intends to provide a comprehensive review on physicochemical properties of PLGA polymer, characterization, formulation, and analytical aspects, manufacturing conditions on product performance, in-vitro release testing, and bioequivalence. Current research on formulation development as per QbD in vitro release testing methods, regulatory research outcomes, and bioequivalence.

EXPERT OPINION

The development of PLGA based long-acting injectables is promising and challenging when considering the numerous interrelated delivery-related factors. Achieving a successful formulation requires a thorough understanding of the critical interactions between polymer/drug properties, release profiles over time, up-to-date knowledge on regulatory guidance, and elucidation of the impact of multiple in vivo conditions to methodically evaluate the eventual clinical efficacy.

Correlation between in vivo microdialysis pharmacokinetics and ex vivo permeation for sinomenine hydrochloride transfersomes with enhanced skin absorption

Transdermal drug delivery systems have drawn increasing attention in recent decades. Estimation of the correlation between ex vivo permeation and in vivo absorption (EVIVC) is an indispensable issue in the research and development of transdermal pharmaceutical products. In this paper, sinomenine hydrochloride (SH) transfersomes (SHTs) were prepared with sodium deoxycholate as edge activator, while SH liposomes (SHLs) were prepared as a control preparation. The transdermal permeation characteristics differences between them were explored by an ex vivo skin permeation experiment with Franz diffusion cell and an in vivo skin/blood pharmacokinetic experiment facilitated by double-sited microdialysis sampling technique. The curves of percentage absorbed versus time (absorption curves) under the skin and in the blood were plotted according to the percentages calculated by the deconvolution approach with the application of Wagner-Nelson model, and were correlated with the ex vivo permeation curves to evaluate a level A correlation, while a level C correlation evaluation was conducted based on the in vivo steady-state blood concentration (C_ss) and the ex vivo steady-state transdermal permeation rate. The ex vivo permeation test indicated that the cumulative transdermal permeated amount of SH at 36 h in SHTs was about 1.7 times of that in SHLs. The skin pharmacokinetic data showed that the C_ss and AUC_0-t of SHTs were about 8.8 and 8.0 times of those of SHLs, respectively, and the MRT_0-t of SHTs was shorter. The blood pharmacokinetic data showed that the C_ss and AUC_0-t of SHTs were about 3.7 and 2.9 times of those of SHLs, respectively. The in vivo absorption curves were correlated well with the ex vivo permeation curves. The squares of correlation coefficient (R²) for SHTs and SHLs were 0.9153 and 0.9355 respectively in the skin, were 0.8536 and 0.7747 respectively in the blood. As to level C EVIVC, there was no significant difference between the predicted C_ss from ex vivo and the measured C_ssin vivo. The transfersomes can be employed as effective vehicles to promote the transdermal absorption of SH, and it is feasible to predict the in vivo skin/blood pharmacokinetic properties of SHLs and SHTs based on the ex vivo skin permeation characteristics.

Novel adapter method for in vitro release testing of in situ forming implants

In situ forming implants are injectable liquid formulations which form solid or semisolid depots following injection. This allows for minimally invasive administration, localized drug delivery, and extended drug release. Unfortunately, this drug delivery strategy lacks standardized in vitro dissolution methods due to the difficulties in recreating implant formation in vitro that is biomimicry and with reproducible and controllable shape and dimensions. In the present study, an innovative, adapter-based in vitro release testing method was developed to solve this problem. Two distinctively different in situ forming implants (a risperidone formulation (suspension) consisting of PLGA dissolved in N-methyl pyrrolidone (NMP), where risperidone powder was suspended to form a drug suspension, and a naproxen formulation (solution) consisting of PLGA dissolved in NMP, where naproxen was completely dissolved to form a solution), were used as model in situ-forming implants. The results revealed that the implants formed in the custom-designed adapter with a water-dissolvable polyvinyl alcohol (PVA) film were bio-mimicking and reproducible in both shape and burst release of drug according to rabbit data. For both the suspension and solution formulations, this adapter-based in vitro release testing method resulted in consistent release data. Compared with a direct injection in vitro release testing method, the release profiles generated using the adapter-based method were capable of distinguishing the different release phases (initial release within 24 h, diffusion-facilitated release, and degradation-controlled release). In addition, the adapter-based method could discriminate formulation and dissolution apparatus changes and could be utilized to develop accelerated release testing methods. This adapter-based method has the promise of wide use in release testing of in situ forming implant formulations and has the potential to be used in the development of in vivo-predictive in vitro release methods.

Models using native tracheobronchial mucus in the context of pulmonary drug delivery research: Composition, structure and barrier properties

Mucus covers all wet epithelia and acts as a protective barrier. In the airways of the lungs, the viscoelastic mucus meshwork entraps and clears inhaled materials and efficiently removes them by mucociliary escalation. In addition to physical and chemical interaction mechanisms, the role of macromolecular glycoproteins (mucins) and antimicrobial constituents in innate immune defense are receiving increasing attention. Collectively, mucus displays a major barrier for inhaled aerosols, also including therapeutics. This review discusses the origin and composition of tracheobronchial mucus in relation to its (barrier) function, as well as some pathophysiological changes in the context of pulmonary diseases. Mucus models that contemplate key features such as elastic-dominant rheology, composition, filtering mechanisms and microbial interactions are critically reviewed in the context of health and disease considering different collection methods of native human pulmonary mucus. Finally, the prerequisites towards a standardization of mucus models in a regulatory context and their role in drug delivery research are addressed.

In vitro percutaneous absorption studies of cannabidiol using human skin: Exploring the effect of drug concentration, chemical enhancers, and essential oils

Cannabidiol, a non-psychoactive constituent of cannabis, has garnered much attention after United States Food and Drug Administration approved Epidiolex® for oral use. Although therapeutic effect of cannabidiol after systemic absorption has been investigated extensively, its therapeutic potential in treating skin disorders after local delivery still needs further exploration. Our study has investigated the effect of cannabidiol concentration, chemical enhancers, and essential oils on percutaneous absorption of cannabidiol. In vitro permeation tests were conducted on human skin. The 24 h study results suggest no significant difference in amount of drug absorbed into skin, between 5% (242.41 ± 12.17 µg/cm²) and 10% (232.79 ± 20.82 cm²) cannabidiol solutions. However, 1% delivered (23.02 ± 4.74 µg/cm²) significantly lower amount of drug into skin than 5% and 10%. Transcutol and isopropyl myristate did not enhance delivery of cannabidiol. However, oleic acid was found to be useful as chemical enhancer. Oleic acid (43.07 ± 10.11 µg/cm²) had significantly higher cannabidiol delivery into skin than the group without oleic acid (10.98 ± 3.40 µg/cm²) after a 4 h in vitro permeation study. Essential oils at concentrations tested had lower total cannabidiol delivery when compared to control. This study's findings will help guide future research on the pharmacological effect of percutaneously delivered cannabidiol on inflammatory skin disorders.

Prediction of subcutaneous drug absorption - do we have reliable data to design a simulated interstitial fluid?

For many years subcutaneous (SC) administration has represented the main route for delivering biopharmaceuticals. However, little information exists about the milieu in the subcutaneous tissue, especially about the properties/composition of the fluid present in this tissue, the interstitial fluid (ISF), which is one of the key elements for the drug release and absorption. Better knowledge on SC ISF composition, properties and dynamics may provide better insight into in vivo drug performance. In addition, a simulated SC ISF, which allows better prediction of in vivo absorption of drugs after subcutaneous administration based on in vitro release experiments, would help to improve formulation design, and reduce the number of animal studies and clinical trials required to obtain marketing authorization. To date, a universal medium for predicting drug solubility/release in the interstitial space does not exist. This review provides an overview of the currently available information on composition and physicochemical properties of SC ISF and critically discusses different isolation techniques in the context of information that could be gained from the isolated fluid. Moreover, it surveys current in vitro release media aiming to mimic SC ISF composition and highlights information gaps that need to be filled for designing a meaningful artificial SC ISF.

Effect of polymer source variation on the properties and performance of risperidone microspheres

Owing to their inherent heterogeneity, determination of similarity of poly (lactic-co-glycolic acid) (PLGA) polymers is very challenging. The complexity in controlling PLGA characteristics has been recognized as an obstacle to the development of PLGA based long-acting complex drug products (such as microspheres). The objectives of the present study were: (1) to determine minor differences in the physicochemical characteristics (such as inherent viscosity, molecular weight (Mw), monomer ratio (L/G ratio), glass transition temperature (Tg), and blockiness) as well as in the hydrolytic degradation profiles of PLGAs from different sources; and (2) to investigate the impact of PLGAs from different sources on the properties and in vitro performance of risperidone microspheres. Four PLGA polymers were purchased from different sources with similar inherent viscosity and/or Mw, L/G ratio and end groups as per the manufacturers' certificate of analysis (CoA). The physicochemical properties of these PLGAs were characterized using the same in-house methods and exhibited differences in inherent viscosity, Mw, blockiness and residue amount. Risperidone was chosen as the model drug and four microsphere formulations were prepared via the same solvent extraction/evaporation method using the PLGAs from different sources. The critical quality attributes of the microspheres (such as particle size, porosity and average pore diameter) and their in vitro release characteristics (burst effect and release rate) were shown to be different. A strong linear correlation was established between risperidone release and PLGA blockiness. This is the first time that such a correlation has been established, which promotes the potential need to further investigate the impact of PLGA blockiness on other PLGA based controlled release drug products.

In vitro dissolution considerations associated with nano drug delivery systems

Nano drug delivery systems (NDDS) offer promising solution for the translation of future nanomedicines. As bioavailability and therapeutic outcomes can be improved by altering the drug release from these NDDS, it becomes essential to thoroughly understand their drug release kinetics. Moreover, U.S. Food and Drug Administration requires critical evaluation of potential safety, efficacy, and public health impacts of nanomaterials. Spiraling up market share of NDDS has also stimulated the pharmaceutical industry to develop their cost-effective generic versions after the expiry of patent and associated exclusivity. However, unlike the conventional dosage forms, the in vivo disposition of NDDS is highly intricate and different from their in vitro behavior. Significant challenges exist in the establishment of in vitro-in vivo correlation (IVIVC) due to incomplete understanding of nanoparticles' in vivo biofate and its impact on in vitro experimental protocols. A rational design of dissolution may serve as quality and quantity control tool and help develop a meaningful IVIVC for favorable economic implications. Clinically relevant drug product specifications (critical quality attributes) can be identified by establishing a link between in vitro performance and in vivo exposure. In vitro dissolution may also play a pivotal role to understand the dissolution-mediated clearance and safety of NDDS. Prevalent in vitro dissolution methods for NDDS and their limitations are discussed in this review, among which USP 4 is gaining more interest recently. Researchers are working diligently to develop biorelevant in vitro release assays to ensure optimal therapeutic performance of generic versions of these NDDS. This article focuses on these studies and presents important considerations for the future development of clinically relevant in vitro release methods. This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Drug release from in situ forming implants and advances in release testing

In situ forming implants, defined as liquid formulations that generate solid or semisolid depots following administration, have shown a range of advantages in drug delivery. This drug delivery strategy allows localized delivery, sustained drug release over periods of days to months, and is a less invasive option compared to traditional solid implants which typically require surgical implantation. Unfortunately, there are a number of quality control challenges in terms of drug release testing of these delivery systems which is likely to have contributed to the relatively few commercially available in situ forming implant products. This article reviews current marketed in situ forming implant products, FDA guidance on in vitro release testing, and formulation and environmental parameters influencing drug release from in situ forming implants. Formulation considerations for development of biological agents loaded in situ forming implants are also discussed. The advantages and limitations of typically used in vitro release testing methods are summarized. Difficulties in the development of in vitro-in vivo correlations (IVIVCs) for in situ forming implant are discussed. The knowledge presented will be helpful for the development of in situ forming implants, as well as for the development of appropriate in vitro testing methods and IVIVCs.

Simulate SubQ: The Methods and the Media

For decades, there has been a growing interest in injectable subcutaneous formulations to improve the absorption of drugs into the systemic circulation and to prolong their release over a longer period. However, fluctuations in the blood plasma levels together with bioavailability issues often limit their clinical success. This warrants a closer look at the performance of long-acting depots, for example, and their dependence on the complex interplay between the dosage form and the physiological microenvironment. For this, biopredictive performance testing is used for a thorough understanding of the biophysical processes affecting the absorption of compounds from the injection site in vivo and their simulation in vitro. In the present work, we discuss in vitro methodologies including methods and media developed for the subcutaneous route of administration on the background of the most relevant absorption mechanisms. Also, we highlight some important knowledge gaps and shortcomings of the existing methodologies to provide the reader with a better understanding of the scientific evidence underlying these models.

Injectable drug delivery systems of doxorubicin revisited: In vitro-in vivo relationships using human clinical data

A growing number of nanomedicines entered the clinical trials and improved our understanding of the in vivo responses expected in humans. The in vitro drug release represents an important critical quality attribute involved in pharmacokinetics. Establishing in vitro-in vivo relationships for nanomedicines requires a careful analysis of the clinical data with respect to the unique differences between drugs and nanomedicines. Also, the biorelevant assay must reflect the release mechanism of the carrier. Four drug delivery systems of doxorubicin were evaluated for their in vitro release behavior under biorelevant conditions using the dispersion releaser. The pharmacokinetics observed during the first-in-men clinical trials were analyzed using a custom-made physiologically-based nanocarrier biopharmaceutics model. The drug product Lipodox® and the clinical candidate NanoCore-7.4 were evaluated to validate the model. Afterward, the in vivo performances of the preclinical candidates NanoCore-6.4 and doxorubicin-loaded nano-cellular vesicle technology systems (an extracellular vesicle preparation) were predicted. In vitro and in vivo release were in good correlation as indicated by the coefficients of determination of 0.98648 (NanoCore-7.4) and 0.94107 (Lipodox®). The predictions required an estimation of the carrier half-life in blood circulation leading to considerable uncertainty. Still, the simulations narrow down the possible scenarios in the clinical evaluation of nanomedicines and provide a valuable addition to animal studies.

Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pK_a and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

Drug delivery strategies for management of women's health issues in the upper genital tract

The female upper genital tract (UGT) hosts important reproductive organs including the cervix, uterus, fallopian tubes, and ovaries. Several pathologies affect these organ systems such as infections, reproductive issues, structural abnormalities, cancer, and inflammatory diseases that could have significant impact on women's overall health. Effective disease management is constrained by the multifaceted nature of the UGT, complex anatomy and a dynamic physiological environment. Development of drug delivery strategies that can overcome mucosal and safety barriers are needed for effective disease management. This review introduces the anatomy, physiology, and mucosal properties of the UGT and describes drug delivery barriers, advances in drug delivery technologies, and opportunities available for new technologies that target the UGT.