Tunable degradation of acetalated dextran microparticles enables controlled vaccine adjuvant and antigen delivery to modulate adaptive immune responses

Polymeric cGAMP microparticles affect the immunogenicity of a broadly active influenza mRNA lipid nanoparticle vaccine

Influenza outbreaks are a major burden worldwide annually. While seasonal vaccines do provide protection against infection, they are limited in that they need to be updated every year to account for the constantly mutating virus. Recently, lipid nanoparticles (LNPs) encapsulating mRNA have seen major success as a vaccine platform for SARS-CoV-2. Herein, we applied LNPs to deliver an mRNA encoding a computationally optimized broadly active (COBRA) influenza immunogen. These COBRA mRNA LNPs induced a broadly active neutralizing antibody response and protection after lethal influenza challenge. To further increase the immunogenicity of the COBRA mRNA LNPs, we combined them with acetalated dextran microparticles encapsulating a STING agonist. Contrary to recent findings, the STING agonist decreased the immunogenicity of the COBRA mRNA LNPs which was likely due to a decrease in mRNA translation as shown in vitro. Overall, this work aids in future selection of adjuvants to use with mRNA LNP vaccines.

Anticancer Mechanism of Astragalus Polysaccharide and Its Application in Cancer Immunotherapy

Astragalus polysaccharide (APS) derived from A. membranaceus plays a crucial role in traditional Chinese medicine. These polysaccharides have shown antitumor effects and are considered safe. Thus, they have become increasingly important in cancer immunotherapy. APS can limit the spread of cancer by influencing immune cells, promoting cell death, triggering cancer cell autophagy, and impacting the tumor microenvironment. When used in combination with other therapies, APS can enhance treatment outcomes and reduce toxicity and side effects. APS combined with immune checkpoint inhibitors, relay cellular immunotherapy, and cancer vaccines have broadened the application of cancer immunotherapy and enhanced treatment effectiveness. By summarizing the research on APS in cancer immunotherapy over the past two decades, this review elaborates on the anticancer mechanism of APS and its use in cancer immunotherapy and clinical trials. Considering the multiple roles of APS, this review emphasizes the importance of using APS as an adjunct to cancer immunotherapy and compares other polysaccharides with APS. This discussion provides insights into the specific mechanism of action of APS, reveals the molecular targets of APS for developing effective clinical strategies, and highlights the wide application of APS in clinical cancer therapy in the future.

Modulating Adjuvant Release Kinetics From Scaffold Vaccines to Tune Adaptive Immune Responses

Increasing the potency, quality, and durability of vaccines represents a major public health challenge. A critical parameter that shapes vaccine immunity is the spatiotemporal context in which immune cells interact with antigen and adjuvant. While various material-based strategies demonstrate that extended antigen release enhances both cellular and humoral immunity, the effect of adjuvant kinetics on vaccine-mediated immunity remains incompletely understood. Here, a previously characterized mesoporous silica rod (MPS) biomaterial vaccine is used to develop a facile, electrostatics-driven approach to tune in vivo kinetics of the TLR9 agonist cytosine phosphoguanosine oligodeoxynucleotide (CpG). It is demonstrated that rapid release of CpG from MPS vaccines, mediated by alterations in MPS chemistry that tune surface charge, generates potent cytotoxic T cell responses and robust, T helper type 1 (Th1)-skewed IgG2a/c antibody titers. Immunophenotyping of lymphoid organs after MPS vaccination with slow or fast CpG release kinetics suggests that differential engagement of migratory dendritic cells and natural killer cells may contribute to the more potent responses observed with rapid adjuvant release. Taken together, these findings suggest that vaccine approaches that pair sustained release of antigen with rapid release of adjuvants with similar characteristics to CpG may drive particularly potent Th1 responses.

Self-adjuvanted L-arginine-modified dextran-based nanogels for sustained local antigenic protein delivery to antigen-presenting cells and enhanced cellular and humoral immune responses

In the development of cancer vaccines, antigens are delivered to elicit potent and specific T-cell responses to eradicate tumour cells. Nonetheless, successful vaccines are often hampered by the poor immunogenicity of tumour antigens, rapid clearance by the innate immunity, and limited cross-presentation on MHC-I to activate CD8+ T-cells arm. To address these issues, we developed dextran-based nanogels to promote antigen uptake, storage, and cross-presentation on MHC-I, while directing immunogenic maturation of the antigen-presenting cells (APCs). To promote the nanocarriers interaction with cells, we modified DX with L-arginine (Arg), whose immunomodulatory activities have been well documented. The ArgDX nanogel performance was compared with the nanogel modified with L-histidine (His) and L-glutamate (Glut). Moreover, we introduced pH-sensitive hydrazone crosslinking during the nanogel formation for the conjugation and controlled release of antigen ovalbumin (OVA). The OVA-laden nanogels have an average size of 325 nm. We demonstrated that the nanogels could rapidly release cargoes upon a pH change from 7 to 5 within 8 days, indicating the controlled release of antigens in the acidic cellular compartments upon internalization. Our results revealed that the ArgDX nanogel could promote greater antigen uptake and storage in DCs in vitro and promoted a stronger immunogenic maturation of DCs and M1 polarization of the macrophages. The OVA signals were co-localized with lysosomal compartments up till 96 hours post-treatment and washing, suggesting the nanogels could facilitate prolonged antigen storage and supply from endo-lysosomal compartments. Furthermore, all the tested nanogel formulations retained antigens at the skin injection sites until day 21. Such delayed clearance could be due to the formation of micron-sized aggregates of OVA-laden nanogels, extending the interactions with the resident DCs. Amongst the amino acid modifications, ArgDX nanogels promoted the highest level of lymph node homing signal CCR7 on DCs. The nanogels also showed higher antigen presentation on both MHC-I and II than DX in vitro. In the in vivo immune studies, ArgDX nanogels were more superior in inducing cellular and humoral immunity than the other treatment groups on day 21 post-treatment. These results suggested that ArgDX nanogel is a promising self-adjuvanted nanocarrier for vaccine delivery.

Immunogenicity of an adjuvanted broadly active influenza vaccine in immunocompromised and diverse populations

Influenza virus outbreaks are a major burden worldwide each year. Current vaccination strategies are inadequate due to antigenic drift/shift of the virus and the elicitation of low immune responses. The use of computationally optimized broadly reactive antigen (COBRA) hemagglutinin (HA) immunogens subvert the constantly mutating viruses; however, they are poorly immunogenic on their own. To increase the immunogenicity of subunit vaccines such as this, adjuvants can be delivered with the vaccine. For example, agonists of the stimulator of interferon genes (STING) have proven efficacy as vaccine adjuvants. However, their use in high-risk populations most vulnerable to influenza virus infection has not been closely examined. Here, we utilize a vaccine platform consisting of acetalated dextran microparticles loaded with COBRA HA and the STING agonist cyclic GMP-AMP. We examine the immunogenicity of this platform in mouse models of obesity, aging, and chemotherapy-induced immunosuppression. Further, we examine vaccine efficacy in collaborative cross mice, a genetically diverse population that mimics human genetic heterogeneity. Overall, this vaccine platform had variable efficacy in these populations supporting work to better tailor adjuvants to specific populations.

Delivery of Agarose-aided Sprays to the Posterior Nose for Mucosa Immunization and Short-term Protection against Infectious Respiratory Diseases

AIM

The study aimed to deliver sprays to the posterior nose for mucosa immunization or short-term protection.

BACKGROUND

Respiratory infectious diseases often enter the human body through the nose. Sars- Cov-2 virus preferentially binds to the ACE2-rich tissue cells in the Nasopharynx (NP). Delivering medications to the nose, especially to the NP region, provides either a short-term protective/ therapeutic layer or long-term mucosa immunization. Hydrogel-aided medications can assist film formation, prolong film life, and control drug release. However, conventional nasal sprays have failed to dispense mediations to the posterior nose, with most sprays lost in the nasal valve and front turbinate.

OBJECTIVE

The objective of the study was to develop a practical delivery system targeting the posterior nose and quantify the dosimetry distribution of agarose-saline solutions in the nasal cavity.

METHODS

The solution viscosities with various hydrogel concentrations (0.1-1%) were measured at different temperatures. Dripping tests on a vertical plate were conducted to understand the hydrogel concentration effects on the liquid film stability and mobility. Transparent nasal airway models were used to visualize the nasal spray deposition and liquid film translocation.

RESULTS

Spray dosimetry with different hydrogel concentrations and inhalation flow rates was quantified on a total and regional basis. The solution viscosity increased with decreasing temperature, particularly in the range of 60-40oC. The liquid viscosity, nasal spray atomization, and liquid film mobility were highly sensitive to the hydrogel concentration. Liquid film translocations significantly enhanced delivered doses to the caudal turbinate and nasopharynx when the sprays were administered at 60oC under an inhalation flow rate of 11 L/min with hydrogel concentrations no more than 0.5%. On the other hand, sprays with 1% hydrogel or administered at 40oC would significantly compromise the delivered doses to the posterior nose.

CONCLUSION

Delivering sufficient doses of hydrogel sprays to the posterior nose is feasible by leveraging the post-administration liquid film translocation.

Overcoming challenges in the delivery of STING agonists for cancer immunotherapy: A comprehensive review of strategies and future perspectives

STING (Stimulator of Interferon Genes) agonists have emerged as promising agents in the field of cancer immunotherapy, owing to their excellent capacity to activate the innate immune response and combat tumor-induced immunosuppression. This review provides a comprehensive exploration of the strategies employed to develop effective formulations for STING agonists, with particular emphasis on versatile nano-delivery systems. The recent advancements in delivery systems based on lipids, natural/synthetic polymers, and proteins for STING agonists are summarized. The preparation methodologies of nanoprecipitation, self-assembly, and hydrogel, along with their advantages and disadvantages, are also discussed. Furthermore, the challenges and opportunities in developing next-generation STING agonist delivery systems are elaborated. This review aims to serve as a reference for researchers in designing novel and effective STING agonist delivery systems for cancer immunotherapy.

Glycovaccinology: The design and engineering of carbohydrate-based vaccine components

Vaccines remain one of the most important pillars in preventative medicine, providing protection against a wide array of diseases by inducing humoral and/or cellular immunity. Of the many possible candidate antigens for subunit vaccine development, carbohydrates are particularly appealing because of their ubiquitous presence on the surface of all living cells, viruses, and parasites as well as their known interactions with both innate and adaptive immune cells. Indeed, several licensed vaccines leverage bacterial cell-surface carbohydrates as antigens for inducing antigen-specific plasma cells secreting protective antibodies and the development of memory T and B cells. Carbohydrates have also garnered attention in other aspects of vaccine development, for example, as adjuvants that enhance the immune response by either activating innate immune responses or targeting specific immune cells. Additionally, carbohydrates can function as immunomodulators that dampen undesired humoral immune responses to entire protein antigens or specific, conserved regions on antigenic proteins. In this review, we highlight how the interplay between carbohydrates and the adaptive and innate arms of the immune response is guiding the development of glycans as vaccine components that act as antigens, adjuvants, and immunomodulators. We also discuss how advances in the field of synthetic glycobiology are enabling the design, engineering, and production of this new generation of carbohydrate-containing vaccine formulations with the potential to prevent infectious diseases, malignancies, and complex immune disorders.

Research progress in the development of natural-product-based mucosal vaccine adjuvants

Mucosal vaccines have great potential and advantages in preventing infection caused by multiple pathogens. In developing mucosal vaccines, the biggest challenge comes from finding safe and effective adjuvants and drug delivery systems. Great progress has been made in the generation of mucosal adjuvants using detoxified bacterial toxin derivatives, pathogen-related molecules, cytokines, and various vaccine delivery systems. However, many problems, relating to the safety and efficacy of mucosal vaccine adjuvants, remain. Certain natural substances can boost the immune response and thus could be used as adjuvants in vaccination. These natural-product-based immune adjuvants have certain advantages over conventional adjuvants, such as low toxicity, high stability, and low cost of production. In this review, we summarize the latest natural-product-based immune adjuvants, and discuss their properties and clinical applications.

Natural Polymeric Composites Derived from Animals, Plants, and Microbes for Vaccine Delivery and Adjuvant Applications: A Review

A key element in ensuring successful immunization is the efficient delivery of vaccines. However, poor immunogenicity and adverse inflammatory immunogenic reactions make the establishment of an efficient vaccine delivery method a challenging task. The delivery of vaccines has been performed via a variety of delivery methods, including natural-polymer-based carriers that are relatively biocompatible and have low toxicity. The incorporation of adjuvants or antigens into biomaterial-based immunizations has demonstrated better immune response than formulations that just contain the antigen. This system may enable antigen-mediated immunogenicity and shelter and transport the cargo vaccine or antigen to the appropriate target organ. In this regard, this work reviews the recent applications of natural polymer composites from different sources, such as animals, plants, and microbes, in vaccine delivery systems.

Delivery of small molecule mast cell activators for West Nile Virus vaccination using acetalated dextran microparticles

Recently, there has been increasing interest in the activation of mast cells to promote vaccine efficacy. Several mast cell activating (MCA) compounds have been reported such as M7 and Compound 48/80 (C48/80). While these MCAs have been proven to be efficacious vaccine adjuvants, their translatability is limited by batch-to-batch variability, challenging large-scale manufacturing, and poor in vivo stability for the M7 peptide. Due to this, high throughput screening was performed to identify small molecule MCAs. Several potent MCAs were identified via this screening, but the in vivo translatability of the compounds was limited due to their poor aqueous solubility. To enhance the delivery of these MCAs we encapsulated them in acetalated dextran (Ace-DEX) microparticles (MPs). We have previously utilized Ace-DEX MPs for vaccine delivery due to their passive targeting to phagocytic cells, acid sensitivity, and tunable degradation. Four different MCA loaded MPs were combined with West Nile Virus Envelope III protein (EDIII) and their vaccine adjuvant activities were compared in vivo. MPs containing the small molecule MCA ST101036 produced the highest anti-EDIII IgG titers of all the MCAs tested. Further, ST101036 MPs produced higher titers than ST101036 formulated with PEG as a cosolvent which highlights the benefit of Ace-DEX MPs over a conventional formulation technique. Finally, in a mouse model of West Nile Virus infection ST101036 MPs produced similar survival to soluble M7 (80-90%). Overall, these data show that ST101036 MPs produce a robust antibody response against EDIII and survival emphasizing the benefits of using Ace-DEX as a delivery platform for the poorly soluble ST101036.

Preclinical developments in the delivery of protein antigens for vaccination

INTRODUCTION

Vaccine technology has constantly advanced since its origin. One of these advancements is where purified parts of a pathogen are used rather than the whole pathogen. Subunit vaccines have no chance of causing disease; however, alone these antigens are often poorly immunogenic. Therefore, they can be paired with immune stimulating adjuvants. Further, subunits can be combined with delivery strategies such as nano/microparticles to enrich their delivery to organs and cells of interest as well as protect them from in vivo degradation. Here, we seek to highlight some of the more promising delivery strategies for protein antigens.

AREAS COVERED

We present a brief description of the different types of vaccines, clinically relevant examples, and their disadvantages when compared to subunit vaccines. Also, specific preclinical examples of delivery strategies for protein antigens.

EXPERT OPINION

Subunit vaccines provide optimal safety given that they have no risk of causing disease; however, they are often not immunogenic enough on their own to provide protection. Advanced delivery systems are a promising avenue to increase the immunogenicity of subunit vaccines, but scalability and stability can be improved. Further, more research is warranted on systems that promote a mucosal immune response to provide better protection against infection.

Rational Design of Advanced Triboelectric Materials for Energy Harvesting and Emerging Applications

The properties of materials play a significant role in triboelectric nanogenerators (TENGs). Advanced triboelectric materials for TENGs have attracted tremendous attention because of their superior advantages (e.g., high specific surface area, high porosity, and customizable macrostructure). These advanced materials can be extensively applied in numerous fields, including energy harvester, wearable electronics, filtration, and self-powered sensors. Hence, designing triboelectric materials as advanced functional materials is important for the development of TENGs. Herein, the structural modification methods based on electrospinning to improve the triboelectric properties and the latest research progress in this kind of TENGs are systematically summarized. Preparation methods and design trends of nanofibers, microspheres, hierarchical structures, and doping nanomaterials are highlighted. The factors influencing the formation and properties of triboelectric materials are considered. Furthermore, the latest progress on the applications of TENGs is systematically elaborated. Finally, the challenges in the development of triboelectric materials are discussed, thereby guiding researchers in the large-scale application of TENGs.

Vinyl Sulfone-functionalized Acetalated Dextran Microparticles as a Subunit Broadly Acting Influenza Vaccine

Influenza is a global health concern with millions of infections occurring yearly. Seasonal flu vaccines are one way to combat this virus; however, they are poorly protective against influenza as the virus is constantly mutating, particularly at the immunodominant hemagglutinin (HA) head group. A more broadly acting approach involves Computationally Optimized Broadly Reactive Antigen (COBRA). COBRA HA generates a broad immune response that is capable of protecting against mutating strains. Unfortunately, protein-based vaccines are often weekly immunogenic, so to help boost the immune response, we employed the use of acetalated dextran (Ace-DEX) microparticles (MPs) two ways: one to conjugate COBRA HA to the surface and a second to encapsulate cGAMP. To conjugate the COBRA HA to the surface of the Ace-DEX MPs, a poly(L-lactide)-polyethylene glycol co-polymer with a vinyl sulfone terminal group (PLLA-PEG-VS) was used. MPs encapsulating the STING agonist cGAMP were co-delivered with the antigen to form a broadly active influenza vaccine. This vaccine approach was evaluated in vivo with a prime-boost-boost vaccination schedule and illustrated generation of a humoral and cellular response that could protect against a lethal challenge of A/California/07/2009 in BALB/c mice.

Dynamic Imine Bonding Facilitates Mannan Release from a Nanofibrous Peptide Hydrogel

Recently, there has been increased interest in using mannan as an immunomodulatory bioconjugate. Despite notable immunological and functional differences between the reduced (R-Man) and oxidized (O-Man) forms of mannan, little is known about the impact of mannan oxidation state on its in vivo persistence or its potential controlled release from biomaterials that may improve immunotherapeutic or prophylactic efficacy. Here, we investigate the impact of oxidation state on the in vitro and in vivo release of mannan from a biocompatible and immunostimulatory multidomain peptide hydrogel, K2(SL)6K2 (abbreviated as K2), that has been previously used for the controlled release of protein and small molecule payloads. We observed that O-Man released more slowly from K2 hydrogels in vitro than R-Man. In vivo, the clearance of O-Man from K2 hydrogels was slower than O-Man alone. We attributed the slower release rate to the formation of dynamic imine bonds between reactive aldehyde groups on O-Man and the lysine residues on K2. This imine interaction was also observed to improve K2 + O-Man hydrogel strength and shear recovery without significantly influencing secondary structure or peptide nanofiber formation. There were no observed differences in the in vivo release rates of O-Man loaded in K2, R-Man loaded in K2, and R-Man alone. These data suggest that, after subcutaneous injection, R-Man naturally persists longer in vivo than O-Man and minimally interacts with the peptide hydrogel. These results highlight a potentially critical, but previously unreported, difference in the in vivo behavior of O-Man and R-Man and demonstrate that K2 can be used to normalize the release of O-Man to that of R-Man. Further, since K2 itself is an adjuvant, a combination of O-Man and K2 could be used to enhance the immunostimulatory effects of O-Man for applications such as infectious disease vaccines and cancer immunotherapy.

Peritumoral scaffold neutralizes tumor pH for chemotherapy sensitization and metastasis inhibition

The abnormal metabolism of rapidly growing tumors can create an acidic tumor microenvironment (TME) that renders cancer cells resistant to chemotherapy and further facilitates endothelial-to-mesenchymal transition (EMT) progress to promote metastasis. Here, we developed a combination strategy consisting of (1) peritumorally injected scaffold that alleviates TME acidosis, and (2) intravenously injected nanoparticles that delivers anti-cancer agents to tumor. Concurrent treatment with these two drug delivery systems profoundly delayed the growth of primary tumor and reduced the spontaneous metastasis to lung in an orthotopic breast cancer mouse model. Mechanism studies both in vitro and in vivo further revealed that neutralization of TME pH by the hydrogel scaffold sensitized cancer cells to nanoparticle-based chemotherapy, thereby strengthening the cytotoxicity against tumor growth; In parallel, reversal of tumor acidity downregulated various pro-metastatic proteins intratumorally to block the EMT progress, thereby reducing the metastatic potential of cancer cells. This work provided proof-of-concept demonstration that chemotherapy sensitization and EMT suppression could be synchronized by the modulation of TME pH, which may be potentially beneficial for simultaneous inhibition of tumor growth and cancer metastasis.

A predictive mechanistic model of drug release from surface eroding polymeric nanoparticles

Effective drug delivery requires ample dosing at the target tissue while minimizing negative side effects. Drug delivery vehicles such as polymeric nanoparticles (NPs) are often employed to accomplish this challenge. In this work, drug release of numerous drugs from surface eroding polymeric NPs was evaluated in vitro in physiologically relevant pH 5 and neutral buffers. NPs were loaded with paclitaxel, rapamycin, resiquimod, or doxorubicin and made from an FDA approved polyanhydride or from acetalated dextran (Ace-DEX), which has tunable degradation rates based on cyclic acetal coverage (CAC). By varying encapsulate, pH condition, and polymer, a range of distinct drug release profiles were achieved. To model the obtained drug release curves, a mechanistic mathematical model was constructed based on drug diffusion and polymer degradation. The resulting diffusion-erosion model accurately described drug release from the variety of surface eroding NPs. For drug release from varied CAC Ace-DEX NPs, the goodness of fit of the developed diffusion-erosion model was compared to several conventional drug release models. The diffusion-erosion model maintained optimal fit compared to conventional models across a range of conditions. Machine learning was then employed to estimate effective diffusion coefficients for the diffusion-erosion model, resulting in accurate prediction of in vitro release of dexamethasone and 3'3'-cyclic guanosine monophosphate-adenosine monophosphate from Ace-DEX NPs. This predictive modeling has potential to aid in the design of future Ace-DEX formulations where optimized drug release kinetics can lead to a desired therapeutic effect.

Stabilizing vaccines via drying: Quality by design considerations

Pandemics and epidemics are continually challenging human beings' health and imposing major stresses on the societies particularly over the last few decades, when their frequency has increased significantly. Protecting humans from multiple diseases is best achieved through vaccination. However, vaccines thermal instability has always been a hurdle in their widespread application, especially in less developed countries. Furthermore, insufficient vaccine processing capacity is also a major challenge for global vaccination programs. Continuous drying of vaccine formulations is one of the potential solutions to these challenges. This review highlights the challenges on implementing the continuous drying techniques for drying vaccines. The conventional drying methods, emerging technologies and their adaptation by biopharmaceutical industry are investigated considering the patented technologies for drying of vaccines. Moreover, the current progress in applying Quality by Design (QbD) in each of the drying techniques considering the critical quality attributes (CQAs), critical process parameters (CPPs) are comprehensively reviewed. An expert advice is presented on the required actions to be taken within the biopharmaceutical industry to move towards continuous stabilization of vaccines in the realm of QbD.

Nano/microparticle Formulations for Universal Influenza Vaccines

Influenza affects millions of people worldwide and can result in severe sickness and even death. The best method of prevention is vaccination; however, the seasonal influenza vaccine often suffers from low efficacy and requires yearly vaccination due to changes in strain and viral mutations. More conserved universal influenza antigens like M2 ectodomain (M2e) and the stalk region of hemagglutinin (HA stalk) have been used clinically but often suffer from low antigenicity. To increase antigenicity, universal antigens have been formulated using nano/microparticles as vaccine carriers against influenza. Utilizing polymers, liposomes, metal, and protein-based particles, indicators of immunity and protection in mouse, pig, ferrets, and chicken models of influenza have been shown. In this review, seasonal and universal influenza vaccine formulations comprised of these materials including their physiochemical properties, fabrication, characterization, and biologic responses in vivo are highlighted. The review is concluded with future perspectives for nano/microparticles as carrier systems and other considerations within the universal influenza vaccine delivery landscape.

Chemically Tuning the Antigen Release Kinetics from Spherical Nucleic Acids Maximizes Immune Stimulation

Cancer vaccine structure is emerging as an important design factor that offers tunable parameters to enhance the targeted immune response. We report the impact of altering the antigen release rate from spherical nucleic acid (SNA) vaccines-nanoparticles with a liposomal core and surface-anchored adjuvant DNA-on immune stimulation. Peptide antigens were incorporated into SNAs using either a nonreducible linker or one of a series of reduction-triggered traceless linkers that release the native peptide at rates controlled by their substitution pattern. Compared with a nonreducible linkage, the traceless attachment of antigens resulted in lower EC50 of T cell proliferation in vitro and greater dendritic cell (DC) activation and higher T cell killing ability in vivo. Traceless linker fragmentation rates affected the rates of antigen presentation by DCs and were correlated with the in vitro potencies of SNAs. Antigen release was correlated with the ex vivo -log(EC50), and more rapid antigen release resulted in an order of magnitude improvement in the EC50 and earlier and greater antigen presentation over the same time-period. In vivo, increasing the rate of antigen release resulted in higher T cell activation and target killing. These findings provide fundamental insights into and underscore the importance of vaccine structure.

Metal-Organic Framework Encapsulated Whole-Cell Vaccines Enhance Humoral Immunity against Bacterial Infection

The increasing rate of resistance of bacterial infection against antibiotics requires next generation approaches to fight potential pandemic spread. The development of vaccines against pathogenic bacteria has been difficult owing, in part, to the genetic diversity of bacteria. Hence, there are many potential target antigens and little a priori knowledge of which antigen/s will elicit protective immunity. The painstaking process of selecting appropriate antigens could be avoided with whole-cell bacteria; however, whole-cell formulations typically fail to produce long-term and durable immune responses. These complications are one reason why no vaccine against any type of pathogenic E. coli has been successfully clinically translated. As a proof of principle, we demonstrate a method to enhance the immunogenicity of a model pathogenic E. coli strain by forming a slow releasing depot. The E. coli strain CFT073 was biomimetically mineralized within a metal-organic framework (MOF). This process encapsulates the bacteria within 30 min in water and at ambient temperatures. Vaccination with this formulation substantially enhances antibody production and results in significantly enhanced survival in a mouse model of bacteremia compared to standard inactivated formulations.

Polymer-Based Nanosystems-A Versatile Delivery Approach

Polymer-based nanoparticles of tailored size, morphology, and surface properties have attracted increasing attention as carriers for drugs, biomolecules, and genes. By protecting the payload from degradation and maintaining sustained and controlled release of the drug, polymeric nanoparticles can reduce drug clearance, increase their cargo's stability and solubility, prolong its half-life, and ensure optimal concentration at the target site. The inherent immunomodulatory properties of specific polymer nanoparticles, coupled with their drug encapsulation ability, have raised particular interest in vaccine delivery. This paper aims to review current and emerging drug delivery applications of both branched and linear, natural, and synthetic polymer nanostructures, focusing on their role in vaccine development.

Developing Acid-Responsive Glyco-Nanoplatform Based Vaccines for Enhanced Cytotoxic T-lymphocyte Responses Against Cancer and SARS-CoV-2

Cytotoxic T-lymphocytes (CTLs) are central for eliciting protective immunity against malignancies and infectious diseases. Here, for the first time, partially oxidized acetalated dextran nanoparticles (Ox-AcDEX NPs) with an average diameter of 100 nm are fabricated as a general platform for vaccine delivery. To develop effective anticancer vaccines, Ox-AcDEX NPs are conjugated with a representative CTL peptide epitope (CTLp) from human mucin-1 (MUC1) with the sequence of TSAPDTRPAP (referred to as Mp1) and an immune-enhancing adjuvant R837 (referred to as R) via imine bond formation affording AcDEX-(imine)-Mp1-R NPs. Administration of AcDEX-(imine)-Mp1-R NPs results in robust and long-lasting anti-MUC1 CTL immune responses, which provides mice with superior protection from the tumor. To verify its universality, this nanoplatform is also exploited to deliver epitopes from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) to prevent coronavirus disease 2019 (COVID-19). By conjugating Ox-AcDEX NPs with the potential CTL epitope of SARS-CoV-2 (referred to as Sp) and R837, AcDEX-(imine)-Sp-R NPs are fabricated for anti-SARS-CoV-2 vaccine candidates. Several epitopes potentially contributing to the induction of potent and protective anti-SARS-CoV-2 CTL responses are examined and discussed. Collectively, these findings shed light on the universal use of Ox-AcDEX NPs to deliver both tumor-associated and virus-associated epitopes.

Hydrogel nanoparticle degradation influences the activation and survival of primary macrophages

The effect of nanoparticle (NP) internalization on cell fate has emerged as an important consideration for nanomedicine design, as macrophages and other phagocytes are the primary clearance mechanisms of administered NP formulations. Pro-survival signaling is thought to be concurrent with phagocytosis and recent work has shown increased macrophage survival following lysosomal processing of internalized NPs. These observations have opened the door to explorations of NP physiochemical properties aimed at tuning the NP-driven macrophage survival at the lysosomal synapse. Here, we report that NP-induced macrophage survival and activation is strongly dependent on NP degradation rate using a series of thiol-containing poly(ethylene glycol) diacrylate-based NPs of equivalent size and zeta potential. Rapidly degrading, high thiol-containing NPs allowed for dramatic enhancement of cell longevity that was concurrent with macrophage stimulation after 2 weeks in ex vivo culture. While equivalent NP internalization resulted in suppressed caspase activity across the NP series, macrophage activation was correlated with increasing thiol content, leading to increased lysosomal activity and a robust pro-survival phenotype. Our results provide insight on tuning NP physiochemical properties as design handles for maximizing ex vivo macrophage longevity, which has implications for improving macrophage-based immune assays, biomanufacturing, and cell therapies.

Recent advances in the production of biomedical systems based on polyhydroxyalkanoates and exopolysaccharides

In recent years, growing attention has been devoted to naturally occurring biological macromolecules and their ensuing application in agriculture, cosmetics, food and pharmaceutical industries. They inherently have antigenicity, low immunogenicity, excellent biocompatibility and cytocompatibility, which are ideal properties for the design of biomedical devices, especially for the controlled delivery of active ingredients in the most diverse contexts. Furthermore, these properties can be modulated by chemical modification via the incorporation of other (macro)molecules in a random or controlled way, aiming at improving their functionality for each specific application. Among the wide variety of natural polymers, microbial polyhydroxyalkanoates (PHAs) and exopolysaccharides (EPS) are often considered for the development of original biomaterials due to their unique physicochemical and biological features. Here, we aim to fullfil a gap on the present associated literature, bringing an up-to-date overview of ongoing research strategies that make use of PHAs (poly (3-hydroxybutyrate), poly (3-hydroxybutyrate-co-3-hydroxyvalerate), poly (3-hydroxyoctanoate), poly(3-hydroxypropionate), poly (3-hydroxyhexanoate-co-3-hydroxyoctanoate), and poly (3-hydroxybutyrate-co-3-hydroxyhexanoate)) and EPS (bacterial cellulose, alginates, curdlan, pullulan, xanthan gum, dextran, hyaluronan, and schizophyllan) as sources of interesting and versatile biomaterials. For the first time, a monograph addressing the properties, pros and cons, status, challenges, and recent progresses regarding the application of these two important classes of biopolymers in biomedicine is presented.

Sustained Release Systems for Delivery of Therapeutic Peptide/Protein

Peptide/protein therapeutics have been significantly applied in the clinical treatment of various diseases such as cancer, diabetes, etc. owing to their high biocompatibility, specificity, and therapeutic efficacy. However, due to their immunogenicity, instability stemming from its complex tertiary and quaternary structure, vulnerability to enzyme degradation, and rapid renal clearance, the clinical application of protein/peptide therapeutics is significantly confined. Though nanotechnology has been demonstrated to prevent enzyme degradation of the protein therapeutics and thus enhance the half-life, issues such as initial burst release and uncontrollable release kinetics are still unsolved. Moreover, the traditional administration method results in poor patient compliance, limiting the clinical application of protein/peptide therapeutics. Exploiting the sustained-release formulations for more controllable delivery of protein/peptide therapeutics to decrease the frequency of injection and enhance patient compliance is thus greatly meaningful. In this review, we comprehensively summarize the substantial advancements of protein/peptide sustained-release systems in the past decades. In addition, the advantages and disadvantages of all these sustained-release systems in clinical application together with their future challenges are also discussed in this review.

Acetalated dextran based nano- and microparticles: synthesis, fabrication, and therapeutic applications

Acetalated dextran (Ac-DEX) is a pH-responsive dextran derivative polymer. Prepared by a simple acetalation reaction, Ac-DEX has tunable acid-triggered release profile. Despite its relatively short research history, Ac-DEX has shown great potential in various therapeutic applications. Furthermore, the recent functionalization of Ac-DEX makes versatile derivatives with additional properties. Herein, we summarize the cutting-edge development of Ac-DEX and related polymers. Specifically, we focus on the chemical synthesis, nano- and micro-particle fabrication techniques, the controlled-release mechanisms, and the rational design Ac-DEX-based of drug delivery systems in various biomedical applications. Finally, we briefly discuss the challenges and future perspectives in the field.

Electrospraying as a novel process for the synthesis of particles/nanoparticles loaded with poorly water-soluble bioactive molecules

Hydrophobicity and low aqueous-solubility of different drugs/nutraceuticals remain a persistent challenge for their development and clinical/food applications. A range of nanotechnology strategies have been implemented to address this issue, and amongst which a particular emphasis has been made on those that afford an improved biological performance and tunable release kinetic of bioactives through a one-step process. More recently, the technique of electrospraying (or electrohydrodynamic atomization) has attained notable impulse in virtue of its potential to tune attributes of nano/micro-structured particles (e.g., porosity, particle size, etc.), rendering a near zero-order release kinetics, diminished burst release manner, as well as its simplicity, reproducibility, and applicability to a broad spectrum of hydrophobic and poorly water-soluble bioactives. Controlled morphology or monodispersity of designed particles could be properly obtained via electrospraying, with a high encapsulation efficiency and without unfavorable denaturation of thermosensitive bioactives upon encapsulation. This paper overviews the recent technological advances in electrospraying for the encapsulation of low queues-soluble bioactive agents. State-of-the-art, advantages, applications, and challenges for its implementation in pharmaceutical/food researches are also discussed.

Novel approaches for vaccine development

Vaccines are critical tools for maintaining global health. Traditional vaccine technologies have been used across a wide range of bacterial and viral pathogens, yet there are a number of examples where they have not been successful, such as for persistent infections, rapidly evolving pathogens with high sequence variability, complex viral antigens, and emerging pathogens. Novel technologies such as nucleic acid and viral vector vaccines offer the potential to revolutionize vaccine development as they are well-suited to address existing technology limitations. In this review, we discuss the current state of RNA vaccines, recombinant adenovirus vector-based vaccines, and advances from biomaterials and engineering that address these important public health challenges.

Considerations for Size, Surface Charge, Polymer Degradation, Co-Delivery, and Manufacturability in the Development of Polymeric Particle Vaccines for Infectious Diseases

Vaccines have advanced human health for centuries. To improve upon the efficacy of subunit vaccines they have been formulated into nano/microparticles for infectious diseases. Much progress in the field of polymeric particles for vaccine formulation has been made since the push for a tetanus vaccine in the 1990s. Modulation of particle properties such as size, surface charge, degradation rate, and the co-delivery of antigen and adjuvant has been used. This review focuses on advances in the understanding of how these properties influence immune responses to injectable polymeric particle vaccines. Consideration is also given to how endotoxin, route of administration, and other factors influence conclusions that can be made. Current manufacturing techniques involved in preserving vaccine efficacy and scale-up are discussed, as well as those for progressing polymeric particle vaccines toward commercialization. Consideration of all these factors should aid the continued development of efficacious and marketable polymeric particle vaccines.

Polymeric Nanoparticle-Based Vaccine Adjuvants and Delivery Vehicles

As vaccine formulations have progressed from including live or attenuated strains of pathogenic components for enhanced safety, developing new adjuvants to more effectively generate adaptive immune responses has become necessary. In this context, polymeric nanoparticles have emerged as a promising platform with multiple advantages, including the dual capability of adjuvant and delivery vehicle, administration via multiple routes, induction of rapid and long-lived immunity, greater shelf-life at elevated temperatures, and enhanced patient compliance. This comprehensive review describes advances in nanoparticle-based vaccines (i.e., nanovaccines) with a particular focus on polymeric particles as adjuvants and delivery vehicles. Examples of the nanovaccine approach in respiratory infections, biodefense, and cancer are discussed.

Design and applications of protein delivery systems in nanomedicine and tissue engineering

Proteins are biological macromolecules involved in a wide range of biological functions, which makes them very appealing as therapeutics agents. Indeed, compared to small molecule drugs, their endogenous nature ensures their biocompatibility and biodegradability, they can be used in a large range of applications and present a higher specificity and activity. However, they suffer from unfolding, enzymatic degradation, short half-life and poor membrane permeability. To overcome such drawbacks, the development of protein delivery systems to protect, carry and deliver them in a controlled way have emerged importantly these last years. In this review, the formulation of a wide panel of protein delivery systems either in the form of polymer or inorganic nanoengineered colloids and scaffolds are presented and the protein loading and release mechanisms are addressed. A section is also dedicated to the detection of proteins and the characterization methods of their release. Then, the main protein delivery systems developed these last three years for anticancer, tissue engineering or diabetes applications are presented, as well as the major in vivo models used to test them. The last part of this review aims at presenting the perspectives of the field such as the use of protein-rich material or the sequestration of proteins. This part will also deal with less common applications and gene therapy as an indirect method to deliver protein.

Merozoite surface protein 2 adsorbed onto acetalated dextran microparticles for malaria vaccination

Malaria remains a global health threat, with significant morbidity and mortality worldwide despite current interventions. The human disease is caused by five different parasitic species, with Plasmodium falciparum being the deadliest. As a result, vaccine research against P. falciparum is a global priority. Merozoite surface protein 2 (MSP2) is a promising vaccine antigen as MSP2-specific antibodies have been shown previously to be protective against malaria infection. In this study, the formulation of an MSP2 vaccine was explored to enhance antigen uptake and achieve both an antibody and Th1 immune response by adsorbing MSP2 antigen onto a biomaterial carrier system. Specifically, MSP2 antigen was adsorbed onto acetalated dextran (Ace-DEX) microparticles (MPs). IgG and IgG2a titers elicited by the Ace-DEX MP platform were compared to titer levels elicited by MSP2 adsorbed to an FDA-approved alum adjuvant, MSP2 alone, and PBS alone. Both adsorption of MSP2 to Ace-DEX MPs and to alum elicited antibody responses in vivo, but only the formulation containing Ace-DEX MPs was able to elicit a significant Th1-biased response needed to combat the intracellular pathogen. As such, MSP2 adsorbed to Ace-DEX MPs demonstrates promise as a malaria vaccine.

Leveraging the modularity of biomaterial carriers to tune immune responses

Biomaterial carriers offer modular features to control the delivery and presentation of vaccines and immunotherapies. This tunability is a distinct capability of biomaterials. Understanding how tunable material features impact immune responses is important to improve vaccine and immunotherapy design, as well as clinical translation. Here we discuss the modularity of biomaterial properties as a means of controlling encounters with immune signals across scales - tissue, cell, molecular, and time - and ultimately, to direct stimulation or regulation of immune function. We highlight these advances using illustrations from recent literature across infectious disease, cancer, and autoimmunity. As the immune engineering field matures, informed design criteria could support more rational biomaterial carriers for vaccination and immunotherapy.

Synthesis of Carboxy-Dimethylmaleic Amide Linked Polymer Conjugate Based Ultra-pH-sensitive Nanoparticles for Enhanced Antitumor Immunotherapy

Cytotoxic T lymphocytes (CTLs) are an important tool for anticancer immunotherapy. To elicit powerful CTL activities, ultra-pH-sensitive nanoparticles (NPs) based on methoxy poly(ethylene glycol)-b-[poly(diisopropylamino)ethyl methacrylate] have been synthesized as a vaccine delivery platform. A representative CTL epitope, ovalbumin (OVA) peptide antigen, was covalently conjugated to the polymer backbone through an acid responsive carboxy-dimethylmaleic amide linker (CDM) resulting in polymer P-CDM-OVA. Interestingly, while the P-CDM-OVA released OVA peptide slowly in a pH 6.4 buffer, the addition of bovine serum albumin (BSA) mimicking proteins encountered in a cellular and/or in vivo environment significantly accelerated the release process. Successful cell surface presentation of OVA was observed when P-CDM-OVA based ultra-pH-sensitive particles were incubated with antigen presenting cells. These P-CDM-OVA NPs greatly enhanced CTL responses in vivo compared to the free peptide or the previously reported acetalated dextran particles encapsulating OVA. The P-CDM was also investigated for adjuvant conjugation, and the coadministration of P-CDM-OVA and the P-CDM-adjuvant conjugate NPs further improved CTL responses in vivo and effectively reduced tumor growth in mice. Thus, the CDM linked polymer presents a promising platform for anticancer immunotherapy.

Bioresponsive drug delivery systems for the treatment of inflammatory diseases

Inflammation is intimately related to the pathogenesis of numerous acute and chronic diseases like cardiovascular disease, inflammatory bowel disease, rheumatoid arthritis, and neurodegenerative diseases. Therefore anti-inflammatory therapy is a very promising strategy for the prevention and treatment of these inflammatory diseases. To overcome the shortcomings of existing anti-inflammatory agents and their traditional formulations, such as nonspecific tissue distribution and uncontrolled drug release, bioresponsive drug delivery systems have received much attention in recent years. In this review, we first provide a brief introduction of the pathogenesis of inflammation, with an emphasis on representative inflammatory cells and mediators in inflammatory microenvironments that serve as pathological fundamentals for rational design of bioresponsive carriers. Then we discuss different materials and delivery systems responsive to inflammation-associated biochemical signals, such as pH, reactive oxygen species, and specific enzymes. Also, applications of various bioresponsive drug delivery systems in the treatment of typical acute and chronic inflammatory diseases are described. Finally, crucial challenges in the future development and clinical translation of bioresponsive anti-inflammatory drug delivery systems are highlighted.

Protein encapsulation by electrospinning and electrospraying

Given the increasing interest in the use of peptide- and protein-based agents in therapeutic strategies, it is fundamental to develop delivery systems capable of preserving the biological activity of these molecules upon administration, and which can provide tuneable release profiles. Electrohydrodynamic (EHD) techniques, encompassing electrospinning and electrospraying, allow the generation of fibres and particles with high surface area-to-volume ratios, versatile architectures, and highly controllable release profiles. This review is focused on exploring the potential of different EHD methods (including blend, emulsion, and co-/multi-axial electrospinning and electrospraying) for the development of peptide and protein delivery systems. An overview of the principles of each technique is first presented, followed by a survey of the literature on the encapsulation of enzymes, growth factors, antibodies, hormones, and vaccine antigens using EHD approaches. The possibility for localised delivery using stimuli-responsive systems is also explored. Finally, the advantages and challenges with each EHD method are summarised, and the necessary steps for clinical translation and scaled-up production of electrospun and electrosprayed protein delivery systems are discussed.

Preparation and Evaluation of Sustained Release Platelet-Rich Plasma-Loaded Gelatin Microspheres Using an Emulsion Method

The management and treatment of chronic wounds or acute wounds remain a major challenge in modern medicine. The application of autologous platelet-rich plasma (PRP) has become a promising adjuvant therapy to promote wound healing. PRP is derived from centrifuged whole blood to extract concentrated platelets, and a large amount of cytokines and growth factors are released upon activation. These bioactive molecules can enhance angiogenesis and tissue regeneration. Herein, PRP-loaded gelatin microspheres were prepared by the emulsion cross-linking method. Scanning electron microscopy results showed that the prepared microspheres are completely spherical, with an average particle size of 15.95 ± 3.79 μm and having a uniform particle size. Among them, the surface of a single microsphere is smooth and has a microporous structure, which may be the main channel for drug diffusion. Results of drug release measurements show that the prepared microspheres can slowly release the vascular endothelial growth factor for more than 7 days. In vitro cell experiments show that the prepared microspheres can promote proliferation and migration of L929 mouse fibroblast cells. In summary, the prepared PRP-loaded gelatin microspheres with high and long-term activity can provide experimental and theoretical knowledge for the development of the clinical long-acting injectable formulations.

Nano- and Microformulations to Advance Therapies for Visceral Leishmaniasis

Visceral leishmaniasis (VL) is a deadly, vector-borne, neglected tropical disease endemic to arid parts of the world and is caused by a protozoan parasite of the genus Leishmania. Chemotherapy is the primary treatment for this systemic disease, and multiple potent therapies exist against this intracellular parasite. However, several factors, such as systemic toxicity, high costs, arduous treatment regimen, and rising drug resistance, are barriers for effective therapy against VL. Material-based platforms have the potential to revolutionize chemotherapy for leishmaniasis by imparting a better pharmacokinetic profile and creating patient-friendly routes of administration, while also lowering the risk for drug resistance. This review highlights promising drug delivery strategies and novel therapies that have been evaluated in preclinical models, demonstrating the potential to advance chemotherapy for VL.

Carbohydrate Conjugates in Vaccine Developments

Vaccines are powerful tools that can activate the immune system for protection against various diseases. As carbohydrates can play important roles in immune recognition, they have been widely applied in vaccine development. Carbohydrate antigens have been investigated in vaccines against various pathogenic microbes and cancer. Polysaccharides such as dextran and β-glucan can serve as smart vaccine carriers for efficient antigen delivery to immune cells. Some glycolipids, such as galactosylceramide and monophosphoryl lipid A, are strong immune stimulators, which have been studied as vaccine adjuvants. In this review, we focus on the current advances in applying carbohydrates as vaccine delivery carriers and adjuvants. We will discuss the examples that involve chemical modifications of the carbohydrates for effective antigen delivery, as well as covalent antigen-carbohydrate conjugates for enhanced immune responses.

Synthesis of Poly(acyclic orthoester)s: Acid-Sensitive Biomaterials for Enhancing Immune Responses of Protein Vaccine

While poly(acyclic orthoester)s (PAOEs) have many appealing features for drug delivery, their application is significantly hindered by a lack of facile synthetic methods. Reported here is a simple method for synthesizing acyclic diketene acetal monomers from diols and vinyl ether, and their polymerization with a diol to first synthesize PAOEs. The PAOEs rapidly hydrolyze at lysosomal pH. With the help of a cationic lipid, ovalbumin, a model vaccine antigen was efficiently loaded into PAOEs nanoparticles using a double emulsion method. These nanoparticles efficiently delivered ovalbumin into the cytosol of dendritic cells and demonstrated enhanced antigen presentation over poly(lactic-co-glycolic acid) (PLGA) nanoparticles. PAOEs are promising vehicles for intracellular delivery of biopharmaceuticals and could increase the utility of poly(orthoesters) in biomedical research.

Fabrication of Polymeric Microparticles by Electrospray: The Impact of Experimental Parameters

Microparticles (MPs) with controlled morphologies and sizes have been investigated by several researchers due to their importance in pharmaceutical, ceramic, cosmetic, and food industries to just name a few. In particular, the electrospray (ES) technique has been shown to be a viable alternative for the development of single particles with different dimensions, multiple layers, and varied morphologies. In order to adjust these properties, it is necessary to optimize different experimental parameters, such as polymer solvent, voltage, flow rate (FR), type of collectors, and distance between the collector and needle tip, which will all be highlighted in this review. Moreover, the influence and contributions of each of these parameters on the design and fabrication of polymeric MPs are described. In addition, the most common configurations of ES systems for this purpose are discussed, for instance, the main configuration of an ES system with monoaxial, coaxial, triaxial, and multi-capillary delivery. Finally, the main types of collectors employed, types of synthesized MPs and their applications specifically in the pharmaceutical and biomedical fields will be emphasized. To date, ES is a promising and versatile technology with numerous excellent applications in the pharmaceutical and biomaterials field and such MPs generated should be employed for the improved treatment of cancer, healing of bone, and other persistent medical problems.

Temporal release of a three-component protein subunit vaccine from polymer multilayers

Sustained antigen and adjuvant availability have been shown to improve antiviral immune responses following vaccination. Transcutaneous delivery of vaccines using microneedles has also shown promise and may be particularly relevant for mosquito-borne viruses. We aim to combine these traits to create a three-component Protein Subunit vaccine on Microneedle Arrays (PSMNs) for transcutaneous delivery using layer-by-layer (LbL) assembly. Polymer multilayer thin films were generated to co-deliver a model combination of three chemically distinct vaccine components, a dengue virus Envelope protein Domain III (EDIII) subunit antigen and two adjuvants, a double-stranded RNA (Poly (inosinic:cytidylic acid) (PolyI:C)) and an amphiphilic hexapeptide, Pam3CSK4. Following application of PSMNs to the skin, implanted thin films facilitated sustained and temporal release of individual vaccine components from polymer multilayers. By modulating LbL composition and architecture, component release profiles in the skin could be independently tuned to allow release of adjuvants and antigen from days up to two weeks. Uptake of antigen and adjuvant from implanted vaccine films by antigen-presenting cells was demonstrated using in vivo mouse and ex vivo human skin models. Overall, we believe that such modular vaccine strategies offer design principles for enhancing the immunogenicity of protein subunit vaccines.

Drug Delivery for Cancer Immunotherapy and Vaccines

Cancer cells are able to avoid immune surveillance and exploit the immune system to grow and metastasize. With the development of nano- and micro-particles, there has been a growing number of immunotherapy delivery systems developed to elicit innate and adaptive immune responses to eradicate cancer cells. This can be accomplished by training resident immune cells to recognize and eliminate cells with tumor-associated antigens or by providing external stimuli to enhance tumor cell apoptosis in the immunosuppressive tumor microenvironment (TME). In this review we will focus on nano- and micro-particle (NP and MP) based immunotherapies and vaccines used to elicit a potent and sustained antitumor immune response.