Tip-loaded fast-dissolving microneedle patches for photodynamic therapy of subcutaneous tumor

Tea polyphenols nanoparticles integrated with microneedles multifunctionally boost 5-aminolevulinic acid photodynamic therapy for skin cancer

5-aminolevulinic acid photodynamic therapy (ALA-PDT) is an emerging therapeutic strategy for skin cancer due to its noninvasiveness and high spatiotemporal selectivity. However, poor skin penetration, poor intratumoral delivery, the instability of aqueous ALA, and the tumor's inherent hypoxia microenvironment are major hurdles hindering the efficacy of ALA-PDT. Herein, we aim to address these challenges by using microneedles (MNs) to assist in delivering nanoparticles based on natural polymeric tea polyphenols (TP NPs) to self-assemble and load ALA (ALA@TP NPs). The TP NPs specifically increase cellular uptake of ALA by A375 and A431 cells and reduce mitochondrial membrane potential. Subsequently, the photosensitizer protoporphyrin IX derived from ALA accumulates in the tumor cells in a dose-dependent manner with TP NPs, generating reactive oxygen species to promote apoptosis and necrosis of A375 and A431 cells. Interestingly, TP NPs can ameliorate the tumor's inherent hypoxia microenvironment and rapid oxygen consumption during PDT by inhibiting hypoxia inducible factor-1α, thereby boosting reactive oxygen species (ROS) generation and enhancing ALA-PDT efficacy through a positive feedback loop. After ALA@TP NPs are loaded into MNs to fabricate ALA@TP NPs@MNs, the MNs enhance skin penetration and storage stability of ALA. Importantly, they exhibit remarkable antitumor efficacy in A375-induced melanoma and A431-induced squamous cell carcinoma with a reduced dose of ALA and reverse hypoxia in vivo. This study provides a facile and novel strategy that integrates MNs and green NPs of TP for addressing the bottlenecks of ALA-PDT and enhancing the ALA-PDT efficacy against skin cancers for future clinical translation.

Ionic Liquid Pretreatment Enhances Skin Penetration of 5-Aminolevulinic Acid: A Promising Scheme for Photodynamic Therapy for Acne Vulgaris

Acne vulgaris is one of the most prevalent skin disorders; it affects up to 85% of adolescents and often persists into adulthood. Topical 5-aminolevulinic acid (ALA)-based photodynamic therapy (PDT) provides an alternative treatment for acne; however, its efficacy is greatly undermined by the limited skin permeability of ALA. Herein, biocompatible ionic liquids (ILs) based on aliphatic acid/choline were employed to enhance the dermal delivery of ALA, thereby improving the efficacy of PDT. In addition to the one-step delivery of ALA by utilizing ILs as carriers, a two-step strategy of pretreating the skin with blank ILs, followed by the administration of free ALA, was employed to test the IL-facilitated dermal delivery of ALA in vitro. The cumulative permeation of ALA through the excised rat skin after IL pretreatment was significantly greater than that in the untreated group, the 20% dimethyl sulfoxide (DMSO) penetration enhancer group, and the one-step group. The penetration efficiency was influenced by formulation and treatment factors, including the type of IL, pretreatment duration, water content in the ILs, and concentration of ALA. In rats, IL pretreatment facilitated faster, greater, and deeper ALA-induced protoporphyrin IX (PpIX) accumulation. Moreover, the IL pretreatment regimen significantly improved the efficacy of ALA-based PDT against acne vulgaris in a rat ear model. The model IL choline citrate ([Ch]3[Cit]1) had a moderate effect on the skin barrier. Trans-epidermal water loss could be recovered 1 h after IL treatment, but no irritation to the rat skin was detected after 7 days of consecutive treatment. It was concluded that biocompatible IL pretreatment enhances the penetration of ALA and thus facilitates the transformation of PpIX and improves the efficacy of PDT against acne vulgaris.

Microneedles Based on a Biodegradable Polymer-Hyaluronic Acid

Transdermal transport can be challenging due to the difficulty in diffusing active substances through the outermost layer of the epidermis, as the primary function of the skin is to protect against the entry of exogenous compounds into the body. In addition, penetration of the epidermis for substances hydrophilic in nature and particles larger than 500 Da is highly limited due to the physiological properties and non-polar nature of its outermost layer, namely the stratum corneum. A solution to this problem can be the use of microneedles, which "bypass" the problematic epidermal layer by dispensing the active substance directly into the deeper layers of the skin. Microneedles can be obtained with various materials and come in different types. Of special interest are carriers based on biodegradable and biocompatible polymers, such as polysaccharides. Therefore, this paper reviews the latest literature on methods to obtain hyaluronic acid-based microneedles. It focuses on the current advancements in this field and consequently provides an opportunity to guide future research in this area.

Targeting Diverse Wounds and Scars: Recent Innovative Bio-design of Microneedle Patch for Comprehensive Management

Wounds and the subsequent formation of scars constitute a unified and complex phased process. Effective treatment is crucial; however, the diverse therapeutic approaches for different wounds and scars, as well as varying treatment needs at different stages, present significant challenges in selecting appropriate interventions. Microneedle patch (MNP), as a novel minimally invasive transdermal drug delivery system, has the potential for integrated and programmed treatment of various diseases and has shown promising applications in different types of wounds and scars. In this comprehensive review, the latest applications and biotechnological innovations of MNPs in these fields are thoroughly explored, summarizing their powerful abilities to accelerate healing, inhibit scar formation, and manage related symptoms. Moreover, potential applications in various scenarios are discussed. Additionally, the side effects, manufacturing processes, and material selection to explore the clinical translational potential are investigated. This groundwork can provide a theoretical basis and serve as a catalyst for future innovations in the pursuit of favorable therapeutic options for skin tissue regeneration.

Bioavailability enhancement of sildenafil citrate via hydrogel-forming microneedle strategy in combination with cyclodextrin complexation

Sildenafil citrate (SIL) as a first-line treatment for erectile dysfunction is currently reported to have poor solubility and bioavailability. Moreover, SIL undergoes first-pass metabolism when taken orally and its injection can lead to discomfort. In this study, we introduce a novel transdermal delivery system that integrates hydrogel-forming microneedles with the inclusion complex tablet reservoir. The hydrogel-forming microneedle was prepared from a mixture of polymers and crosslinkers through a crosslinking process. Importantly, the formulations showed high swelling capacity (>400 %) and exhibited adequate mechanical and penetration properties (needle height reduction < 10 %), penetrating up to five layers of Parafilm® M (assessed to reach the dermis layer). Furthermore, to improve the solubility of SIL in the reservoir, the SIL was pre-complexed with β-cyclodextrin. Molecular docking analysis showed that SIL was successfully encapsulated into the β-cyclodextrin cavity and was the most suitable conformation compared to other CD derivatives. Moreover, to maximize SIL delivery, sodium starch glycolate was also added to the reservoir formulation. As a proof of concept, in vivo studies demonstrated the effectiveness of this concept, resulting in a significant increase in AUC (area under the curve) compared to that obtained after administration of pure SIL oral suspension, inclusion complex, and Viagra® with relative bioavailability > 100 %. Therefore, the approach developed in this study could potentially increase the efficacy of SIL in treating erectile dysfunction by being non-invasive, safe, avoiding first-pass metabolism, and increasing drug bioavailability.

Minoxidil Nanosuspension-Loaded Dissolved Microneedles for Hair Regrowth

Minoxidil (MIN) is used topically to treat alopecia. However, its low absorption limits its use, warranting a new strategy to enhance its delivery into skin layers. The objective of this study was to evaluate the dermal delivery of MIN by utilizing dissolved microneedles (MNs) loaded with MIN nanosuspension (MIN-NS) for hair regrowth. MIN-NS was prepared by the solvent-antisolvent precipitation technique. The particle size of MIN-NS was 226.7 ± 9.3 nm with a polydispersity index of 0.29 ± 0.17 and a zeta potential of -29.97 ± 1.23 mV. An optimized formulation of MIN-NS was selected, freeze-dried, and loaded into MNs fabricated with sodium carboxymethyl cellulose (Na CMC) polymeric solutions (MIN-NS-loaded MNs). MNs were evaluated for morphology, dissolution rate, skin insertion, drug content, mechanical properties, ex vivo permeation, in vivo, and stability studies. MNs, prepared with 14% Na CMC, were able to withstand a compression force of 32 N for 30 s, penetrate Parafilm M® sheet at a depth of 374-504 µm, and dissolve completely in the skin within 30 min with MIN %recovery of 95.1 ± 6.5%. The release of MIN from MIN-NS-loaded MNs was controlled for 24 h. MIN-NS-loaded MNs were able to maintain their mechanical properties and chemical stability for 4 weeks, when kept at different storage conditions. The in vivo study of the freeze-dried MIN-NS and MIN-NS-loaded MNs proved hair regrowth on rat skin after 11 and 7 days, respectively. These results showed that MIN-NS-loaded MNs could potentially improve the dermal delivery of MIN through the skin to treat alopecia.

Rapid dissolution microneedle based on polyvinyl alcohol/chitosan for local oral anesthesia

At present, the main clinical methods of oral local anesthesia are direct injection of anesthetic and surface ointment. However, the pain and fear caused by the injection, the discomfort of topical anesthetic creams, and the scour and moist oral environment during the procedure pose great challenges to oral anesthesia. Herein, we designed a Lido-PVP/PVA DMNP microneedle (MN) for oral local anesthesia. The microneedle tip was consisted of Polyvinylpyrrolidone/Polyvinyl alcohol (PVP/PVA), which can quickly dissolve and release the lidocaine hydrochloride (Lido) drug within 5 min to achieve rapid anesthesia. The backing was composed of polyvinyl alcohol/chitosan (PVA/CS), and its excellent adhesion can overcome saliva erosion and anchor firmly to the oral mucosa, significantly improving the utilization rate of drugs, as well as the patient compliance. MNs have good mechanical properties for tissue insertion while possessing high drug loading (3 mg/MNs). Von Frey tests proved that MNs showed a faster and more effective local anesthetic effect (anesthesia takes effect at 5 min) compared to cream (anesthesia takes effect at 30 min). In addition, the excellent biocompatibility and no skin irritation endowed Lido-PVP/PVA DMNP MNs a great potential for oral local anesthesia in the oral cavity.

Transdermally delivered tolerogenic nanoparticles induced effective immune tolerance for asthma treatment

Induction of antigen-specific immune tolerance for the treatment of allergic or autoimmune diseases is an attractive strategy. Herein, we investigated the protective effect of a transdermal microneedle patch against allergic asthma by stimulating allergen-specific immune tolerance. We fabricated biodegradable tolerogenic nanoparticles (tNPs) that are loaded with a model allergen ovalbumin (OVA) and an immunomodulator rapamycin, and filled the tNPs into microneedle tips by centrifugation to form sustained-release microneedles. After intradermal immunization, the microneedles successfully delivered the cargos into the skin and sustainedly released them for over 96 h. Importantly, the microneedles induced allergen-specific regulatory T cells (Treg), decreased the levels of pro-inflammatory cytokines and antibodies while increased anti-inflammation cytokines, finally leading to restored immune homeostasis. The lung tissue analysis illustrated that the sustained-release microneedles significantly reduced the infiltration of eosinophils, decreased the accumulation of mucus and collagen, and significantly relived asthma symptoms. Our results suggested that the sustained-release microneedle-based transdermal delivery system can induce antigen-specific immune tolerance with improved compliance and efficacy, providing a new therapeutic strategy for the treatment of allergic and autoimmune diseases.

Advances in biomedical systems based on microneedles: design, fabrication, and application

Wearable devices have become prevalent in biomedical studies due to their convenient portability and potential utility in biomarker monitoring for healthcare. Accessing interstitial fluid (ISF) across the skin barrier, microneedle (MN) is a promising minimally invasive wearable technology for transdermal sensing and drug delivery. MN has the potential to overcome the limitations of conventional transdermal drug administration, making it another prospective mode of drug delivery after oral and injectable. Subsequently, combining MN with multiple sensing approaches has led to its extensive application to detect biomarkers in ISF. In this context, employing MN platforms and control schemes to merge diagnostic and therapeutic capabilities into theranostic systems will facilitate on-demand therapy and point-of-care diagnostics, paving the way for future MN technologies. A comprehensive analysis of the growing advances of microneedles in biomedical systems is presented in this review to summarize the latest studies for academics in the field and to offer for reference the issues that need to be addressed in MN application for healthcare. Covering an array of novel studies, we discuss the following main topics: classification of microneedles in the biomedical field, considerations of MN design, current applications of microneedles in diagnosis and therapy, and the regulatory landscape and prospects of microneedles for biomedical applications. This review sheds light on the significance of microneedle-based innovations, presenting an analysis of their potential implications and contributions to the community of wearable healthcare technologies. The review provides a comprehensive understanding of the field's current state and potential, making it a valuable resource for academics and clinicians seeking to harness the full potential of MN applications.

Vac-and-fill: A micromoulding technique for fabricating microneedle arrays with vacuum-activated, hands-free mould-filling

We report a simple and reproducible micromoulding technique that dynamically fills microneedle moulds with a liquid formulation, using a plastic syringe, triggered by the application of vacuum ('vac-and-fill'). As pressure around the syringe drops, air inside the syringe pushes the plunger to uncover an opening in the syringe and fill the microneedle mould without manual intervention, therefore removing inter-operator variability. The technique was validated by monitoring the plunger movement and pressure at which the mould would be filled over 10 vacuum cycles for various liquid formulation of varying viscosity (water, glycerol, 20 % polyvinylpyrrolidone (PVP) solution or 40 % PVP solution). Additionally, the impact of re-using the disposable syringes on plunger movement, and thus the fill pressure, was investigated using a 20 % PVP solution. The fill pressure was consistent at 300-450 mbar. It produced well-formed and mechanically robust PVP, poly(methylvinylether/maleic anhydride) and hydroxyethylcellulose microneedles from liquid formulations. This simple and inexpensive technique of micromoulding eliminated the air entrapment and bubble formation, which prevent reproducible microneedle formation, in the resultant microneedle arrays. It provides a cost-effective alternative to the conventional micromoulding techniques, where the application of vacuum ('fill-and-vac') or centrifugation following mould-filling may be unsuitable, ineffective or have poor reproducibility.

Fabrication and characterization of coated microneedle patches based on PEGDA for transdermal administration of metformin

Type 2 diabetes is one of the major challenges that the world is facing today. However, metformin (MET) as most type 2 diabetics' first-line oral hypoglycemic drug may cause serious side effects such as gastrointestinal irritation and nausea which reduce the patients' medication compliance. Therefore, the aim of the study was to design a safe and effective self-treatment device for the delivery of MET. Here, a kind of coated microneedle (MN) patches based on poly(ethylene glycol)diacrylate (PEGDA) were prepared by a two-step casting method and photopolymerization process for transdermal administration of MET. The needles wrapped with drug-loaded hyaluronic acid (HA) coating showed promising mechanical properties and drug delivery ability that allowed them to penetrate the skin barrier for rapid drug delivery, and they had no skin irritancy. The in vivo experiment of type 2 diabetic rats showed a satisfying hypoglycemic effect of the coated MN patches. The study shows that the prepared MN patches will be a potential method for the treatment of type 2 diabetes in the future.

Co-delivery of drugs by adhesive transdermal patches equipped with dissolving microneedles for the treatment of rheumatoid arthritis

In this study, a dosage form consisting of dissolving (D) microneedles (M) and an adhesive (A) transdermal patch (P; DMAP) was designed and pre-clinically evaluated for the treatment of rheumatoid arthritis (RA). The tip of the dissolving microneedles (DMNs) was loaded with the macromolecular drug melittin (Mel@DMNs), this to treat joint inflammation and bone damage, while the adhesive transdermal patches contained the low molecular weight drug diclofenac sodium (DS; DS@AP) for pain relief. Mel@DMNs and DS@AP were ingeniously connected through an isolation layer for compounding Mel-DS@DMAP for the simultaneous delivery of the drugs. In vitro and in vivo experiments showed that DS@AP did not affect the mechanical properties and dissolution process of Mel@DMNs while the pores formed by the microneedles promoted the skin penetration of DS. Treatment of rats suffering from RA with Mel-DS@DMAP reduced paw swelling and damage of the synovium, joint and cartilage, suggesting that the 'patch-microneedle' dosage form might be promising for the treatment and management of RA.

Microarray needles comprised of arginine-modified chitosan/PVA hydrogel for enhanced antibacterial and wound healing potential of curcumin

Wound healing is a multifaceted and complex process that includes inflammation, hemostasis, remodeling, and granulation. Failures in any link may cause the healing process to be delayed. As a result, wound healing has always been a main research focus across the entire medical field, posing significant challenges and financial burdens. Hence, the current investigation focused on the design and development of arginine-modified chitosan/PVA hydrogel-based microneedles (MNs) as a curcumin (CUR) delivery system for improved wound healing and antibacterial activity. The substrate possesses exceptional swelling capabilities that allow tissue fluid from the wound to be absorbed, speeding up wound closure. The antibacterial activity of MNs was investigated against S. aureus and E. coli. The results revealed that the developed CUR-loaded MNs had increased antioxidant activity and sustained drug release behavior. Furthermore, after being loaded in the developed MNs, it revealed improved antibacterial activity of CUR. Wound healing potential was assessed by histopathological analysis and wound closure%. The observed results suggest that the CUR-loaded MNs greatly improved wound healing potential via tissue regeneration and collagen deposition, demonstrating the potential of developed MNs patches to be used as an effective carrier for wound healing in healthcare settings.

Tiny titans- unravelling the potential of polysaccharides and proteins based dissolving microneedles in drug delivery and theranostics: A comprehensive review

In recent years, microneedles (MNs) have emerged as a promising alternative to traditional drug delivery systems in transdermal drug delivery. The use of MNs has demonstrated significant potential in improving patient acceptance and convenience while avoiding the invasiveness of traditional injections. Dissolving, solid, hollow, coated, and hydrogel microneedles are among the various types studied for drug delivery. Dissolving microneedles (DMNs), in particular, have gained attention for their safety, painlessness, patient convenience, and high delivery efficiency. This comprehensive review primarily focuses on different types of microneedles, fabrication methods, and materials used in fabrication of DMNs such as hyaluronic acid, chitosan, alginate, gelatin, collagen, silk fibroin, albumin, cellulose and starch, to list a few. The review also provides an exhaustive discussion on the applications of DMNs, including the delivery of vaccines, cosmetic agents, contraceptives, hormone and genes, and other therapeutic applications like for treating cancer, skin diseases, and diabetes, among others, are covered in this review. Additionally, this review highlights some of the DMN systems that are presently undergoing clinical trials. Finally, the review discusses current advances and trends in DMNs, as well as future prospective directions for this ground-breaking technology in drug delivery.

Dissolving microneedle patch-assisted transdermal delivery of methotrexate improve the therapeutic efficacy of rheumatoid arthritis

Methotrexate (MTX) is a first-line treatment for rheumatoid arthritis (RA), but its clinical use is greatly limited by the adverse effects and poor patient compliance caused by traditional oral administration or injection. In recent years, some transdermal drug delivery systems have received considerable attention due to overcoming these shortcomings. In this study, we developed dissolving microneedle patch (DMNP) for transdermal delivery of MTX to treat RA safely and effectively. The morphology, mechanical strength, skin insertion, drug content, in vitro transdermal delivery, and other properties of DMNP were characterized. Meanwhile, the adjuvant-induced arthritis model of rats was established to investigate the therapeutic effect of MTX-loaded DMNP in vivo. The results showed that the microneedles had excellent morphology with neat array and complete needles, good puncture performance and mechanical strength, and rapid intradermal dissolution rate. In vitro transdermal delivery results indicated that microneedles could significantly increase drug transdermal permeation compared with the cream group. The pharmacological study showed that MTX-loaded DMNP significantly alleviated paw swelling, inhibit inflammatory response via downregulating the levels of TNF-α and IL-1β, relieved synovium destruction with less cartilage erosion, and slowed the progression of RA in AIA rats. Besides, DMNP presented better therapeutic performance than cream or intragastric administration at the same dosage of MTX. In conclusion, the MTX-loaded dissolving microneedle patch has advantages of safety, convenience, and high efficacy over conventional administrations, laying a foundation for the transdermal drug delivery system treatment of rheumatoid arthritis.

Development of hyaluronic acid-silica composites via in situ precipitation for improved penetration efficiency in fast-dissolving microneedle systems

Fast-dissolving microneedles (DMNs) hold significant promise for transdermal drug delivery, offering improved patient compliance, biocompatibility, and functional adaptability for various therapeutic purposes. However, the mechanical strength of the biodegradable polymers used in DMNs often proves insufficient for effective penetration into human skin, especially under high humidity conditions. While many composite strategies have been developed to reinforce polymer-based DMNs, simple mixing of the reinforcements with polymers often results in ineffective penetration due to inhomogeneous dispersion of the reinforcements and the formation of undesired micropores. In response to this challenge, this study aimed to enhance the mechanical performance of hyaluronic acid (HA)-based microneedles (MNs), one of the most commonly used DMN systems. We introduced in situ precipitation of silica nanoparticles (Si) into the HA matrix in conjunction with conventional micromolding. The precipitated silica nanoparticles were uniformly distributed, forming an interconnected network within the HA matrix. Experimental results demonstrated that the mechanical properties of the HA-Si composite MNs with up to 20 vol% Si significantly improved, leading to higher penetration efficiency compared to pure HA MNs, while maintaining structural integrity without any critical defects. The composite MNs also showed reduced degradation rates and preserved their drug delivery capabilities and biocompatibility. Thus, the developed HA-Si composite MNs present a promising solution for efficient transdermal drug delivery and address the mechanical limitations inherent in DMN systems. STATEMENT OF SIGNIFICANCE: HA-Si composite dissolving microneedle (DMN) systems were successfully fabricated through in situ precipitation and conventional micromolding processes. The precipitated silica nanoparticles formed an interconnected network within the HA matrix, ranging in size from 25 to 230 nm. The optimal silica content for HA-Si composite MN systems should be up to 20 % by volume to maintain structural integrity and mechanical properties. HA-Si composite MNs with up to 20 % Si showed improved penetration efficiency and reduced degradation rates compared to pure HA MNs, thereby expanding the operational window. The HA-Si composite MNs retained good drug delivery capabilities and biocompatibility.

Applications and recent advances in transdermal drug delivery systems for the treatment of rheumatoid arthritis

Rheumatoid arthritis is a chronic, systemic autoimmune disease predominantly based on joint lesions with an extremely high disability and deformity rate. Several drugs have been used for the treatment of rheumatoid arthritis, but their use is limited by suboptimal bioavailability, serious adverse effects, and nonnegligible first-pass effects. In contrast, transdermal drug delivery systems (TDDSs) can avoid these drawbacks and improve patient compliance, making them a promising option for the treatment of rheumatoid arthritis (RA). Of course, TDDSs also face unique challenges, as the physiological barrier of the skin makes drug delivery somewhat limited. To overcome this barrier and maximize drug delivery efficiency, TDDSs have evolved in terms of the principle of transdermal facilitation and transdermal facilitation technology, and different generations of TDDSs have been derived, which have significantly improved transdermal efficiency and even achieved individualized controlled drug delivery. In this review, we summarize the different generations of transdermal drug delivery systems, the corresponding transdermal strategies, and their applications in the treatment of RA.

Dissolving and Swelling Hydrogel-Based Microneedles: An Overview of Their Materials, Fabrication, Characterization Methods, and Challenges

Polymeric hydrogels are a complex class of materials with one common feature-the ability to form three-dimensional networks capable of imbibing large amounts of water or biological fluids without being dissolved, acting as self-sustained containers for various purposes, including pharmaceutical and biomedical applications. Transdermal pharmaceutical microneedles are a pain-free drug delivery system that continues on the path to widespread adoption-regulatory guidelines are on the horizon, and investments in the field continue to grow annually. Recently, hydrogels have generated interest in the field of transdermal microneedles due to their tunable properties, allowing them to be exploited as delivery systems and extraction tools. As hydrogel microneedles are a new emerging technology, their fabrication faces various challenges that must be resolved for them to redeem themselves as a viable pharmaceutical option. This article discusses hydrogel microneedles from a material perspective, regardless of their mechanism of action. It cites the recent advances in their formulation, presents relevant fabrication and characterization methods, and discusses manufacturing and regulatory challenges facing these emerging technologies before their approval.

Layer-Specific BTX-A Delivery to the Gastric Muscularis Achieves Effective Weight Control and Metabolic Improvement

The rising incidence of health-endangering obesity constantly calls for more effective treatments. Gastric intramural injection of botulinum neurotoxin A (BTX-A) as a new modality carries great promise yet inconsistent therapeutic efficacy. A layer-specific delivery strategy enabled by dissolving microneedles is hence pioneered to investigate the working site of BTX-A and the resulting therapeutic effects. The drug-loaded tips of the layer-specific gastric paralysis microneedles (LGP-MN) rapidly release and achieve uniform distribution of BTX-A within the designated gastric wall layers. In an obesity rat model, the LGP-MNs not only prove safer than conventional injection, but also demonstrate consistently better therapeutic effects with muscular layer delivery, including 16.23% weight loss (3.06-fold enhancement from conventional injection), 55.20% slower gastric emptying rate, improved liver steatosis, lowered blood lipids, and healthier gut microbiota. Further hormonal study reveals that the elevated production of stomach-derived glucagon-like peptide-1 due to the muscularis-targeting LGP-MN treatment is an important contributor to its unique glucose tolerance-improving effect. This study provides clear indication of the gastric muscularis as the most favorable working site of BTX-A for weight loss and metabolic improvement purposes, and meanwhile suggests that the LGP-MNs could serve as a novel clinical approach to treat obesity and metabolic syndromes.

Practicality of non-invasive glucagon-loaded dissolving microneedle for life-saving treatment of severe hypoglycemia in a diabetic rat model

The development of dissolving microneedles (DMNs) has brought light to the transdermal delivery of biomolecules that are released into the skin through the rapid dissolution of the matrix material to enter the systemic circulation and exert therapeutic effects. Herein, we aimed to prepare, characterize, and analyze the effectiveness of a glucagon-loaded DMN system that rapidly increases blood sugar levels in rats with diabetic hypoglycemia. The stability and content of biological drugs following DMNs preparation was assessed using circular dichroism and bicinchoninic acid kit for protein determination kits(BCA kits). The maximum drug loading capacity of DMNs was approximately 140 μg in each patch, and the microneedles could be stored for up to 14 days under dry storage conditions. In vitro skin permeation studies were conducted using a Franz diffusion cell apparatus for glucagon-loaded DMNs. To investigate the efficacy of transdermal drug delivery, drug-laden DMNs were administered to rats with hypoglycemic diabetes. Compared to subcutaneous injections, microneedle drug release demonstrated comparable efficacy in raising blood glucose levels in vivo. Therefore, this study demonstrated that glucagon-loaded DMNs may be a promising approach for efficient transdermal drug delivery as an alternative to subcutaneous injection for the treatment of severe hypoglycemia in patients with diabetes.

Microneedle-assisted transdermal delivery of perfluorotripropylamine-based oxygenated emulsion gel loaded with 5-aminolevulinic acid for enhanced photodynamic therapy of cutaneous squamous cell carcinoma

Topical photodynamic therapy (TPDT) is a clinical treatment for cutaneous squamous cell carcinoma (CSCC). However, the therapeutic efficacy of TPDT for CSCC is significantly weakened by hypoxia, which is caused by the oxygen-poor environment of the skin and CSCC and by the high oxygen consumption of TPDT itself. To overcome these problems, we developed a topically applied perfluorotripropylamine-based oxygenated emulsion gel loaded with the photosensitizer 5-ALA (5-ALA-PBOEG) by a simple ultrasound-assisted emulsion method. With the aid of the microneedle roller, 5-ALA-PBOEG dramatically increased the accumulation of 5-ALA in the epidermis and the dermis, as well as throughout the dermis; a total of 67.6% ± 9.97% of the applied dose penetrated into and through the dermis, which is 19.1±3.2-fold that of the 5-ALA-PBOEG without microneedle treatment group, and 16.9±0.3-fold that of the aminolevulinic acid hydrochloride topical powder treatment group (p<0.001). Meanwhile, PBOEG enhanced the singlet oxygen yield of 5-ALA-induced protoporphyrin IX. The results of in vivo antitumor activity in human epidermoid carcinoma (A431) bearing mice showed that by increasing the oxygen content in tumor tissues, the developed 5-ALA-PBOEG plus microneedle treatment and laser irradiation showed better tumor growth inhibition than the respective control formulations. In addition, the results of safety studies, including the multiple-dose skin irritation study, allergy tests, and skin H&E staining, demonstrated the safety of 5-ALA-PBOEG plus microneedle treatment. In conclusion, the 5-ALA-PBOEG plus microneedle treatment shows great potential in the fight against CSCC and other skin cancers.

Personalized demand-responsive biphasic microneedle patch for smart drug administration

Many patients, especially those with chronic diseases, would benefit from personalized drugs that could modulate the treatment regimen. Tailored drug delivery via microneedle patches (MNPs) has emerged as a promising technology to address this problem. However, it is still difficult to modulate the treatment regimen in one MNP. Here, multiple treatment regimens were achieved by the same MNP functionalized with modifiable nanocontainers (NCs). The MNPs were biphasic in design, resulting in approximately a twice as high drug loading capacity than that of traditional dissolving MNPs. The drug-loaded NCs could have a zero-order release rate for at least 20 d in vitro. Furthermore, three model MNPs, Type-A (100% drug), Type-B (50% drug and 50% NCs) and Type-C (100% NCs) were generated to simulate various personalized dosing needs. In vivo application of these models could achieve effective therapeutic drug concentrations in the first 12 h and adjusted the duration of effective drug action from 24 h to 96 h and 144 h, respectively, with outstanding biocompatibility. These findings indicate that this device holds significant promise for personalized drug delivery.

Advances in Natural Polymer-Based Transdermal Drug Delivery Systems for Tumor Therapy

As an alternative to traditional oral and intravenous injections with limited efficacy, transdermal drug delivery (TDD) has shown great promise in tumor treatment. Over the past decade, natural polymers have been designed into various nanocarriers due to their excellent biocompatibility, biodegradability, and easy availability, providing more options for TDD. In addition, surface functionalization modification of the rich functional groups of natural polymers, which in turn are developed into targeted and stimulus-responsive functional materials, allows precise delivery of drugs to tumor sites and release of drugs in response to specific stimuli. It not only improves the treatment efficiency of tumor but also reduces the toxic and side effects to normal tissues. Therefore, the development of natural polymer-based TDD (NPTDD) systems has great potential in tumor therapy. In this review, the mechanism of NPTDD systems such as penetration enhancers, nanoparticles, microneedles, hydrogels and nanofibers prepared from hyaluronic acid, chitosan, sodium alginate, cellulose, heparin and protein, and their applications in tumor therapy are overviewed. This review also outlines the future prospects and current challenges of NPTDD systems for local treatment tumors.

Microneedle-mediated treatment for superficial tumors by combining multiple strategies

Superficial tumors are still challenging to overcome due to the high risk and toxicity of surgery and conventional chemotherapy. Microneedles (MNs) are widely used in the treatment of superficial skin tumors (SST) due to the high penetration rate of the stratum corneum (SC), excellent biocompatibility, simple preparation process, high patient compliance, and minimal invasion. Most importantly, MNs can provide not only efficient and rarely painful delivery carriers, but also combine multi-model strategies with photothermal therapy (PTT), immunotherapy, and gene therapy for synergistic efficacy. To promote an in-depth understanding of their superiorities, this paper systematically summarized the latest application progress of MNs in the treatment of SST by delivering various types of photosensitizers, immune signal molecules, genes, and chemotherapy drugs. Just as important, the advantages, limitations, and drug release mechanisms of MNs based on different materials are introduced in the paper. In addition, the application of MN technology to clinical practice is the ultimate goal of all the work. The obstacles and possible difficulties in expanding the production of MNs and achieving clinical transformation are briefly discussed in this paper. To be anticipated, our work will provide new insights into the precise and rarely painful treatment of SST in the future.

Dissolving microneedle patches-mediated percutaneous delivery of tetramethylpyrazine for rheumatoid arthritis treatment

Recently, transdermal treatment of rheumatoid arthritis (RA) has received increasing attention due to the advantages of improving patient compliance and avoiding gastrointestinal side effects. However, the stratum corneum (SC) barrier limits the transdermal delivery of most substances. Therefore, we constructed tetramethylpyrazine-loaded dissolving microneedle patches (TMP-DMNPs) and investigated its anti-rheumatoid arthritis effect. The cone-shaped dissolving microneedle patch had complete, neatly arranged needles and great mechanical strength. It could effectively penetrate the stratum corneum when applied to the skin. In vitro transdermal experiment showed that DMNPs could significantly promote the transdermal penetration of TMP compared with TMP-cream. The needles were completely dissolved within 18 min and the applied skin recovered completely within 3 h. The excipients and blank DMNP had good safety and biocompatibility to human rheumatoid arthritis fibroblast synovial cells. To compare the therapeutic effects, the animal model was established. The experiments of paw swelling, histopathology and X-ray examination showed that dissolving microneedles significantly alleviated paw condition, reduced the serum concentrations of proinflammatory cytokines, and inhibited synovial tissue damage in AIA rats. These results indicate that the DMNPs we prepared can deliver TMP safely, effectively and conveniently, providing a basis for the percutaneous treatment of RA.

Flexible Monitoring, Diagnosis, and Therapy by Microneedles with Versatile Materials and Devices toward Multifunction Scope

Microneedles (MNs) have drawn rising attention owing to their merits of convenience, noninvasiveness, flexible applicability, painless microchannels with boosted metabolism, and precisely tailored multifunction control. MNs can be modified to serve as novel transdermal drug delivery, which conventionally confront with the penetration barrier caused by skin stratum corneum. The micrometer-sized needles create channels through stratum corneum, enabling efficient drug delivery to the dermis for gratifying efficacy. Then, incorporating photosensitizer or photothermal agents into MNs can conduct photodynamic or photothermal therapy, respectively. Besides, health monitoring and medical detection by MN sensors can extract information from skin interstitial fluid and other biochemical/electronic signals. Here, this review discloses a novel monitoring, diagnostic, and therapeutic pattern by MNs, with elaborate discussion about the classified formation of MNs together with various applications and inherent mechanism. Hereby, multifunction development and outlook from biomedical/nanotechnology/photoelectric/devices/informatics to multidisciplinary applications are provided. Programmable intelligent MNs enable logic encoding of diverse monitoring and treatment pathways to extract signals, optimize the therapy efficacy, real-time monitoring, remote control, and drug screening, and take instant treatment.

Microneedles: structure, classification, and application in oral cancer theranostics

Oral cancer is a malignant tumor that threatens the health of individuals on a global scale. Currently available clinical treatment methods, including surgery, radiotherapy, and chemotherapy, significantly impact the quality of life of patients with systemic side effects. In the treatment of oral cancer, local and efficient delivery of antineoplastic drugs or other substances (like photosensitizers) to improve the therapy effect is a potential way to optimize oral cancer treatments. As an emerging drug delivery system in recent years, microneedles (MNs) can be used for local drug delivery, offering the advantages of high efficiency, convenience, and noninvasiveness. This review briefly introduces the structures and characteristics of various types of MNs and summarizes MN preparation methods. An overview of the current research application of MNs in different cancer treatments is provided. Overall, MNs, as a means of transporting substances, demonstrate great potential in oral cancer treatments, and their promising future applications and perspectives of MNs are outlined in this review.

An antibacterial and proangiogenic double-layer drug-loaded microneedle patch for accelerating diabetic wound healing

Diabetic wounds are difficult to heal because of bacterial infections and insufficient angiogenesis. Herein, we report a double-layer drug-loaded microneedle patch with antibacterial and angiogenesis-promoting properties for diabetic wound healing. The double-layer microneedle comprises the hyaluronic acid (HA)-loaded antibacterial drug tetracycline hydrochloride (TCH) as the tip and a mixture of chitosan and silk fibroin containing the angiogenic drug deferoxamine (DFO) as the substrate. In the double-layer drug-loaded microneedle system (DMN@TCH/DFO), rapid dissolution of HA at the tip releases TCH to promote early antibacterial activity. The substrate exhibits excellent swelling properties, facilitating the absorption of tissue fluid from the wound to promote wound contraction. Simultaneously, DFO is released to promote angiogenesis. Therefore, DMN@TCH/DFO exhibited adequate mechanical properties, excellent swelling and biocompatibility, antibacterial properties, and angiogenesis-promoting capabilities. In a wound model of diabetic rats, DMN@TCH/DFO reduced inflammatory responses, promoted angiogenesis, and facilitated collagen deposition, thereby accelerating diabetic wound healing. Overall, DMN@TCH/DFO can accelerate the healing of diabetic wounds and has clinical application prospects.

Photoresponsive polymeric microneedles: An innovative way to monitor and treat diseases

Microneedles (MN) technology is an emerging technology for the transdermal delivery of therapeutics. When combined with photoresponsive (PR) materials, MNs can deliver therapeutics precisely and effectively with enhanced efficacy or synergistic effects. This review systematically summarizes the therapeutic applications of PRMNs in cancer therapy, wound healing, diabetes treatment, and diagnostics. Different PR approaches to activate and control the release of therapeutic agents from MNs are also discussed. Overall, PRMNs are a powerful tool for stimuli-responsive controlled-release therapeutic delivery to treat various diseases.

Dissolving Microneedles Loaded with Gestodene: Fabrication and Characterization In Vitro and In Vivo

Background

Gestodene (GEST) is widely used in female contraception. It is currently being used as an oral contraceptive. However, unfortunately, oral contraceptives are often associated with several bothersome side effects and poor compliance. Therefore, a sustained delivery system for GEST to overcome these shortcomings is highly desirable.

Objectives

The present study successfully developed a kind of novel dissolving microneedles (DMNs) with a potential for sustained release and a minimally invasive intradermal treatment of GEST.

Methods

The dissolving microneedles containing GEST were fabricated using polyvinylpyrrolidone as the base material. The characteristics in vitro and pharmacokinetics in vivo of GEST-loaded DMNs were investigated.

Results

The results showed that the microneedle could pierce the porcine skin and release the drug at an average dose of 20µg/cm2 daily for seven days. The pharmacokinetic experiment of the microneedles indicated that the plasma level of GEST in rats increased with increasing drug dosage, and the plasma drug concentration-time curves were much flatter compared with subcutaneous injection and oral administration. In addition, no cutaneous irritation was observed.

Conclusions

GEST-loaded DMNs may be a promising intradermal sustained delivery system for contraceptive use.

Revolutionizing Therapeutic Delivery with Microneedle Technology for Tumor Treatment

The tumor is an uncontrolled growth of tissue that can be localized (benign) or possesses the capability of metastasis (malignant). The conventional methods of tumor diagnosis, such as acupuncture, endoscopy, and histopathology, and treatment methods, such as injections, chemotherapy, surgery, and radiotherapy, are invasive, expensive, and pose severe safety and management issues for the patients. Microneedle technology is a recently developed approach for active transdermal drug delivery. It is minimally invasive, self-administrable, bypasses the first-pass effect, and effectively delivers chemotherapeutics and drugs at low doses, thus, overcoming the drawbacks of conventional delivery systems. This review provides an idea of the types, materials utilized in the fabrication, and techniques used for the preparation of microneedles (MNs), as well as their application in tumor diagnosis and treatment. Additionally, emphasis is given to the case studies related to MNs-assisted tumor therapy, such as photothermal therapy, gene therapy, photodynamic therapy, chemotherapy, immunotherapy, and various combination therapies. MNs also serve as a tool for diagnosis by the bio-sampling of blood and interstitial skin fluid, as well as biosensing various cancer biomarkers. The combined therapy and diagnostics provide theranostic MNs for enhanced and personalized tumor therapy. The limitations and prospects of MNs development are also discussed.

Polymeric Biomaterials for Topical Drug Delivery in the Oral Cavity: Advances on Devices and Manufacturing Technologies

There are several routes of drug administration, and each one has advantages and limitations. In the case of the topical application in the oral cavity, comprising the buccal, sublingual, palatal, and gingival regions, the advantage is that it is painless, non-invasive, allows easy application of the formulation, and it is capable of avoiding the need of drug swallowing by the patient, a matter of relevance for children and the elderly. Another advantage is the high permeability of the oral mucosa, which may deliver very high amounts of medication rapidly to the bloodstream without significant damage to the stomach. This route also allows the local treatment of lesions that affect the oral cavity, as an alternative to systemic approaches involving injection-based methods and oral medications that require drug swallowing. Thus, this drug delivery route has been arousing great interest in the pharmaceutical industry. This review aims to condense information on the types of biomaterials and polymers used for this functionality, as well as on production methods and market perspectives of this topical drug delivery route.

Next-Generation 3D Scaffolds for Nano-Based Chemotherapeutics Delivery and Cancer Treatment

Cancer is the leading cause of death after cardiovascular disease. Despite significant advances in cancer research over the past few decades, it is almost impossible to cure end-stage cancer patients and bring them to remission. Adverse effects of chemotherapy are mainly caused by the accumulation of chemotherapeutic agents in normal tissues, and drug resistance hinders the potential therapeutic effects and curing of this disease. New drug formulations need to be developed to overcome these problems and increase the therapeutic index of chemotherapeutics. As a chemotherapeutic delivery platform, three-dimensional (3D) scaffolds are an up-and-coming option because they can respond to biological factors, modify their properties accordingly, and promote site-specific chemotherapeutic deliveries in a sustainable and controlled release manner. This review paper focuses on the features and applications of the variety of 3D scaffold-based nano-delivery systems that could be used to improve local cancer therapy by selectively delivering chemotherapeutics to the target sites in future.

Small Animal In Situ Drug Delivery Effects via Transdermal Microneedles Array versus Intravenous Injection: A Pilot Observation Based on Photoacoustic Tomography

Intravenous injection is a rapid, low-cost, and direct method that is commonly used to deliver multifarious biotherapeutics and vaccines. However, intravenous injection often causes trauma or tissue injury that requires professional operation. Transdermal drug delivery overcomes the aforementioned defects, and the microneedles (MNs) array is one of the most promising transdermal drug delivery platforms. Timely, precise, and non-invasive monitoring and evaluation of the effects of MNs in transdermal administration is significant to the research of drug efficiency response to specific diseases. In this sense, photoacoustic computed tomography (PACT), which provides wavelength-selective and deep-penetrating optical contrast, could be a promising imaging tool for in situ evaluation of the treatment effects. In this work, we propose the use of PACT to non-invasively assess the effects of real-time drug delivery in glioma tumors through transdermal administration with degradable indocyanine green-loaded hyaluronic acid MNs (ICG-HA-MNs). The outcome is systematically and quantitatively compared with that via intravenous injection. It is found that the photoacoustic signals of ICG in the tumor site express a faster elevation and shorter duration time in the intravenous injection group; by contrast, the photoacoustic signals demonstrate a lower intensity but prolonged duration time in the MNs group. The observed phenomenon indicates faster response but shorter drug duration for intravenous injection, which is in contrast with the lower loading but prolonged performance for transdermal drug delivery with MNs. These results exhibit good consistency with the earlier, common-sense findings reported from other aspects, confirming that PACT can serve as a potential imaging tool to precisely, non-invasively, and quickly evaluate in situ drug delivery effects and provide constructive guidance for the design and fabrication of microneedles.

The most promising microneedle device: present and future of hyaluronic acid microneedle patch

Microneedle patch (MNP) is an alternative to the oral route and subcutaneous injection with unique advantages such as painless administration, good compliance, and fewer side effects. Herein, we report MNP as a prominent strategy for drug delivery to treat local or systemic disease. Hyaluronic acid (HA) has advantageous properties, such as human autologous source, strong water absorption, biocompatibility, and viscoelasticity. Therefore, the Hyaluronic acid microneedle patch (HA MNP) occupies a large part of the MNP market. HA MNP is beneficial for wound healing, targeted therapy of certain specific diseases, extraction of interstitial skin fluid (ISF), and preservation of drugs. In this review, we summarize the benefits of HA and cross-linked HA (x-HA) as an MNP matrix. Then, we introduce the types of HA MNP, delivered substances, and drug distribution. Finally, we focus on the biomedical application of HA MNP as an excellent drug carrier in some specific diseases and the extraction and analysis of biomarkers. We also discuss the future development prospect of HA MNP in transdermal drug delivery systems (TDDS).

Dual-function microneedle array for efficient photodynamic therapy with transdermal co-delivered light and photosensitizers

Photodynamic therapy (PDT), as a globally accepted method for treating different forms of skin or mucosal disorders, requires efficient co-delivery of photosensitizers and corresponding therapeutic light. The adverse effects of intravenous injection of photosensitizers have been reduced by the development of microneedle arrays for transdermal local photosensitizer delivery. However, the drawbacks of the only available therapeutic light delivery method at the moment, which is directly applying light to the skin surface, are yet to be improved. This study presents a new strategy in which therapeutic light and photosensitizer were transdermally co-delivered into local tissues. A flexible dual-function microneedle array (DfMNA) which contains 400 microneedles was developed. Each microneedle consists of a dissolvable needle tip (140 μm in height) for delivering the photosensitizer and a transparent needle body (660 μm in height) for guiding therapeutic light. Using port-wine stains, which is a frequently occurring skin disorder caused by vascular malformation, as a model disease, the effectiveness of DfMNA mediated PDT has been verified on mice. Compared with the standard operation procedure of clinical PDT, the DfMNA decreases the amount of photosensitizer from 300 μg to 0.5 μg and reduces therapeutic light irradiance from 100 mW cm^-2 to 60 mW cm^-2 while realizing better treatment effects. As a result, the skin damage and the burden on the metabolic system have been alleviated. The DfMNA has a remarkably reduced photosensitizer amount and, for the first time, realized transdermal delivery of therapeutic light for PDT, thus avoiding the disadvantages of existing PDT methodologies.

Polymeric microneedles for enhanced drug delivery in cancer therapy

Microneedles (MNs) have attracted the interest of researchers. Polymeric MNs offer tremendous promise as drug delivery vehicles for bio-applications because of their high loading capacity, strong patient adherence, excellent biodegradability and biocompatibility, low toxicity, and extremely cheap cost. Incorporating enhanced-property nanomaterials into polymeric MNs matrix increases their features such as better mechanical strength, sustained drug delivery, lower toxicity, and higher therapeutic effects, therefore considerably increasing their biomedical application. This paper discusses polymeric MN fabrication techniques and the present status of polymeric MNs as a delivery method for enhanced drug delivery in cancer therapeutic applications. Furthermore, the opportunities and challenges of polymeric MNs for improved drug delivery in cancer therapy are highlighted.

Microneedle Patches with O2 Propellant for Deeply and Fast Delivering Photosensitizers: Towards Improved Photodynamic Therapy

Photodynamic therapy (PDT) is an emerging technique for treating tumors. Especially, topical administration of photosensitizers (PSs) is more favorable for superficial tumor treatments with low systematic phototoxicity. Yet, ineffective migration of PSs to targeted tumor tissues and rapid consumption of O₂ during PDT greatly limit their effects. Herein, PS-loaded microneedle (MN) patches with O₂ propellant for a deeper and faster transdermal delivery of PS and improved PDT by embedding sodium percarbonate (SPC) into dissolving poly(vinyl pyrrolidone) MNs are presented. It is shown that SPC in the MNs can react with surrounding fluid to generate gaseous oxygen bubbles, forming vigorous fluid flows and thus greatly enhancing PS of chlorin e6 (Ce6) penetration in both hydrogel models and skin tissues. Reactive oxygen species (ROS) in hypoxic breast cancer cells (4T1 cells) are greatly increased by rapid penetration of PS and relief of hypoxia in vitro, and Ce6-loaded SPC MNs show an excellent cell-killing effect. Moreover, lower tumor growth rate and tumor mass after a 20-d treatment in tumor-bearing mice model verify the improved PDT in gaseous oxygen-droved delivery of PS. This study demonstrates a facile yet effective route of MN delivery of PSs for improved PDT in hypoxic tumor treatment.

Promising Strategies for Transdermal Delivery of Arthritis Drugs: Microneedle Systems

Arthritis is a general term for various types of inflammatory joint diseases. The most common clinical conditions are mainly represented by rheumatoid arthritis and osteoarthritis, which affect more than 4% of people worldwide and seriously limit their mobility. Arthritis medication generally requires long-term application, while conventional administrations by oral delivery or injections may cause gastrointestinal side effects and are inconvenient for patients during long-term application. Emerging microneedle (MN) technology in recent years has created new avenues of transdermal delivery for arthritis drugs due to its advantages of painless skin perforation and efficient local delivery. This review summarizes various types of arthritis and current therapeutic agents. The current development of MNs in the delivery of arthritis drugs is highlighted, demonstrating their capabilities in achieving different drug release profiles through different self-enhancement methods or the incorporation of nanocarriers. Furthermore, the challenges of translating MNs from laboratory studies to the clinical practice and the marketplace are discussed. This promising technology provides a new approach to the current drug delivery paradigm in treating arthritis in transdermal delivery.

3D-Printed Integrated Ultrasonic Microneedle Array for Rapid Transdermal Drug Delivery

Transdermal drug delivery (TDD) is an attractive alternative to oral and hypodermic injection drug administration, and is poised to increase its impact on medicine and pharmaceutical design. Microneedles (MNs) are a new minimally invasive TDD method widely used in medicine and cosmetology. MNs create a microscale channel from the stratum corneum to the dermis and enable drug delivery of hydrophilic and macromolecular into the skin. Although MNs allow different drugs to penetrate the stratum corneum, they cannot provide an extra driving force for drug transport in tissue. To overcome this limitation and achieve fast, controllable drug delivery, an integrated 3D-printed ultrasonic MN array (USMA) device consisting of hollow MNs and an ultrasonic transducer is proposed. The hollow MNs enable drug to penetrate the stratum corneum, and the ultrasound transmitted through the MNs provides the driving force for drug transportation in tissue. Using methylene blue and bovine serum albumin as model drugs, we tested the drug delivery performance of USMA on porcine skin; the results show that USMA significantly enhanced the delivery efficiency of model drugs. Besides, USMA obviously reduced MNs insertion force and tissue damage, which were well-tolerated and gentle. This study suggests that the integrated ultrasonic MN array has great potential for clinical drug delivery with high efficiency and lessening the suffering of patients.

The Rise of Polymeric Microneedles: Recent Developments, Advances, Challenges, and Applications with Regard to Transdermal Drug Delivery

The current scenario of the quest for microneedles (MNs) with biodegradability and biocompatibility properties is a potential research area of interest. Microneedles are considered to be robust, can penetrate the skin's deep-seated layers, and are easy to manufacture, and their applications from the clinical perspective are still ongoing with standard escalation. This review paper focuses on some of the pivotal variants of polymeric microneedles which are specifically dissolvable and swell-based MNs. It further explores the drug dissolution kinetics and insertion behavior mechanisms with an emphasis on the need for mathematical modeling of MNs. This review further evaluates the multifarious fabrication methods, with an update on the advances in the fabrication of polymeric MNs, the choice of materials used for the fabrication, the challenges in polymeric MN fabrication, and the prospects of polymeric MNs with applications pertinent to healthcare, by exclusively focusing on the procurable literature over the last decade.

Hydrogels for localized chemotherapy of liver cancer: a possible strategy for improved and safe liver cancer treatment

The systemic drug has historically been preferred for the treatment of the majority of pathological conditions, particularly liver cancer. Indeed, this mode of treatment is associated with adverse reactions, toxicity, off-target accumulation, and rapid hepatic and renal clearance. Numerous efforts have been made to design systemic therapeutic carriers to improve retention while decreasing side effects and clearance. Following systemic medication, local administration of therapeutic agents allows for higher 'effective' doses with fewer side effects, kidney accumulation, and clearance. Hydrogels are highly biocompatible and can be used for both imaging and therapy. Hydrogel-based drug delivery approach has fewer side effects than traditional chemotherapy and can deliver drugs to tumors for a longer time. The chemical and physical flexibility of hydrogels can be used to achieve disease-induced in situ accumulation as well as subsequent drug release and hydrogel-programmed degradation. Moreover, they can act as a biocompatible depot for localized chemotherapy when stimuli-responsive carriers are administrated. Herein, we summarize the design strategies of various hydrogels used for localized chemotherapy of liver cancer and their delivery routes, as well as recent research on smart hydrogels.

Dissolving microneedles with a biphasic release of antibacterial agent and growth factor to promote wound healing

Infected wound healing is a complex and dynamic process affecting millions of people. Since wound healing contains multiple stages, it requires staged management to realize the early inhibition of infection and the subsequent promotion of wound healing. A key point is to design a biphasic release system with antibacterial agents and growth factors to promote wound regeneration. As a safe, efficient and painless transdermal drug delivery method, microneedles (MNs) have attracted widespread attention. Herein, we present dissolving MNs with the biphasic release of an antibacterial agent and a growth factor to promote wound healing. bFGF was first encapsulated in PLGA microspheres (bFGF@PLGA) and then co-loaded with free ofloxacin onto polyvinylpyrrolidone MNs. Owing to the fast dissolution of the substrate, ofloxacin was quickly released to rapidly inhibit infection, while the PLGA microspheres were left in the wound. Due to the slow degradation of PLGA, bFGF encapsulated in the PLGA microspheres was slowly released to further promote wound healing. In vivo studies demonstrated that the MNs with the biphasic release of antibacterial agent and growth factor exhibited a superior capability to promote wound healing. This biphasic release system combined with microneedles has a bright future in wound healing.

Application of microneedle patches for drug delivery; doorstep to novel therapies

In the past decade, microneedle-based drug delivery systems showed promising approaches to become suitable and alternative for hypodermic injections and can control agent delivery without side effects compared to conventional approaches. Despite these advantages, the procedure of microfabrication is facing some difficulties. For instance, drug loading method, stability of drugs, and retention time are subjects of debate. Besides, the application of novel refining fabrication methods, types of materials, and instruments are other issues that need further attention. Herein, we tried to summarize recent achievements in controllable drug delivery systems (microneedle patches) in vitro and in vivo settings. In addition, we discussed the influence of delivered drugs on the cellular mechanism and immunization molecular signaling pathways through the intradermal delivery route. Understanding the putative efficiency of microneedle patches in human medicine can help us develop and design sophisticated therapeutic modalities.

Persistent Production of Reactive Oxygen Species with Zn2GeO4:Cu Nanorod-Loaded Microneedles for Methicillin-Resistant Staphylococcus Aureus Infectious Wound Healing

Skin wound infection caused by methicillin-resistant Staphylococcus aureus (MRSA) is an urgent concern. Photodynamic therapy has emerged as a promising means of combating bacterial infection. However, continuous or repeated in situ light excitation is required for photosensitizers to produce reactive oxygen species (ROS), and most photosensitizers need sufficient oxygen to produce singlet oxygen (¹O₂), which greatly limits their clinical application. In this work, we report the preparation of Zn₂GeO₄:Cu²⁺ (ZGC) persistent luminescence nanorods with excellent ability for persistent ROS production after stopping excitation for MRSA infectious wound healing. The prepared ZGC nanorods were loaded into dissolvable microneedles (MNs) (ZGC@MNs) to penetrate biofilms and treat MRSA-infected wounds in a minimally invasive manner. ZGC showed a long-persistent photocatalytic effect to constantly produce multiple ROS (¹O₂, hydroxyl radical, and superoxide radical) accompanied by persistent luminescence after a pre-illumination. The MN tips of ZGC@MNs were rapidly dissolved to release ZGC for the continuous production of multiple ROS for at least 48 h with no need for in situ excitation and no special requirement on the amount of oxygen for eliminating MRSA biofilms. The developed ZGC@MN patches exhibited excellent antibacterial activity and biocompatibility for effectively reducing inflammation and promoting wound healing in vivo.

Tip-concentrated microneedle patch delivering everolimus for therapy of multiple sclerosis

Multiple sclerosis is a chronic progressive demyelinating disease of the central nervous system. At present, systemic drug therapy for multiple sclerosis has limited efficacy and serious side effects. Everolimus, as a new generation of mTOR inhibitors, can effectively alleviate the inflammatory reaction of the central nervous system and offers a promising choice for the treatment of multiple sclerosis. However, due to the low oral bioavailability and narrow response window of oral everolimus, a new delivery system is urgently needed to overcome the above problems. In this study, we constructed a tip-concentrated microneedle patch as a transdermal delivery system of everolimus for the treatment of multiple sclerosis. Here, the drug was concentrated in the needle tips by the rational design, making it delivered completely into the skin. The therapeutic effect of everolimus-loaded microneedles was evaluated using the experimental autoimmune encephalomyelitis (EAE) model and further verified with neurological function scores and the histopathological results of the spinal cord. These results indicated that the tip-concentrated microneedle patch provided an effective, safe and simple method for the transdermal delivery of everolimus, thus providing a new treatment for multiple sclerosis.