Utilization of zeolites as CO2 capturing agents: Advances and future perspectives

Behavior, mechanisms, and applications of low-concentration CO2 in energy media

This review explores the behavior of low-concentration CO2 (LCC) in various energy media, such as solid adsorbents, liquid absorbents, and catalytic surfaces. It delves into the mechanisms of diffusion, adsorption, and catalytic reactions, while analyzing the potential applications and challenges of these properties in technologies like air separation, compressed gas energy storage, and CO2 catalytic conversion. Given the current lack of comprehensive analyses, especially those encompassing multiscale studies of LCC behavior, this review aims to provide a theoretical foundation and data support for optimizing CO2 capture, storage, and conversion technologies, as well as guidance for the development and application of new materials. By summarizing recent advancements in LCC separation techniques (e.g., cryogenic air separation and direct air carbon capture) and catalytic conversion technologies (including thermal catalysis, electrochemical catalysis, photocatalysis, plasma catalysis, and biocatalysis), this review highlights their importance in achieving carbon neutrality. It also discusses the challenges and future directions of these technologies. The findings emphasize that advancing the efficient utilization of LCC not only enhances CO2 reduction and resource utilization efficiency, promoting the development of clean energy technologies, but also provides an economically and environmentally viable solution for addressing global climate change.

Modeling of CO2 solubility and partial pressure in blended diisopropanolamine and 2-amino-2-methylpropanol solutions via response surface methodology and artificial neural network

In this study, Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) were developed to estimate the equilibrium solubility and partial pressure of CO2 in blended aqueous solutions of diisopropanolamine (DIPA) and 2-amino-2-methylpropanol (AMP). In this study, several key parameters were analyzed to understand the behavior of the aqueous DIPA/AMP system for CO2 capture. Including DIPA (9-21 wt%), AMP (9-21 wt%), temperature (323.15-358.15 K), pressure (2.140-332 kPa) and CO2 solubility (0.0531-0.8796 mol/mole). The results of the RSM analysis for CO2 solubility indicate that the model demonstrates a strong fit, as evidenced by a Pred-R² of 0.9601, an adjusted R² of 0.9481, and a highly significant F-value of 80.22. The high predicted R² of 0.9601 and 0.9292 values for CO2 solubility and CO2 partial pressure indicate that the predictor variables can explain a substantial amount of the variability in the response variable. The multilayer perceptron (MLP) architecture demonstrated strong correlation capabilities, featuring one hidden layer with 10 and 5 neurons, respectively. Its topology was structured as 4-10-1 for predicting CO2 solubility and 4-5-1 for predicting CO2 partial pressure. The accuracy of the predictions was notably high, with coefficients of determination of 0.99581 for CO2 solubility and 0.99839 for CO2 partial pressure, achieved using the Levenberg-Marquardt algorithm. Upon further analysis, it was concluded that the MLP model exhibited the lowest error rates, with mean square errors of 0.00009085 for CO2 solubility and 0.00316632 for CO2 partial pressure. The findings emphasized that the MLP model not only outperformed the RSM model in accuracy but also demonstrated greater adaptability in handling the intricate variables associated with CO2 solubility and partial pressure in capture technologies.

Rapid CO2 mineralization by zeolite via cation exchange

This study illuminates the mineral carbonation potential of zeolite minerals. Zeolite minerals are common alteration products of basaltic rocks and are known for their ability to rapidly exchange their interstitial cations with those in aqueous solutions. A series of closed system batch reactor experiments was conducted at 60 °C by combining stilbite, a Ca-bearing zeolite, with 0.1 mol/kgw aqueous sodium carbonate solutions. The individual batch reactor experiments ran from 2 to 225 days. Scanning electron microscope images of the solids recovered from the experiments reveal the presence of extensive calcite crystals, suggesting rapid and efficient carbonation. The total mass of CO2 mineralized during the experiments, determined from the direct analysis of the solids by thermogravimetric analysis and organic carbon analysis, equaled more than 5% of that of the original stilbite within a month. This is approximately equal to maximum CO2 mineralization possible if all of the Ca in the original stilbite was incorporated into calcite. Chemical analysis of reacted stilbite shows that approximately 2 Na atoms were incorporated into stilbite for each Ca atom incorporated into the precipitated calcite. These observations indicate that the carbon removal by stilbite proceeded by the rapid exchange of Na for Ca in its structure. This process results in carbonation rates that are far faster than those achieved by a silicate dissolution-carbonate precipitation mechanism. These results, consequently, compel consideration of targeting subsurface mineral carbonation efforts into zeolite-rich rocks.

Advancements and Challenges in Adsorption-Based Carbon Capture Technology: From Fundamentals to Deployment

Carbon dioxide (CO2) adsorption on solid sorbents represents a promising technology for separating carbon from different sources and mitigating anthropogenic emissions. The complete integration of carbon capture technologies in various industrial sectors will be crucial for a sustainable, low-carbon future. Despite developing new sorbents, a comprehensive strategy is essential to realize the full potential and widespread adoption of CO2 capture technologies, including different engineering aspects. This study discusses the pathway for deploying adsorption-based carbon capture technology in fundamental material science aspects, thermo-physical properties behavior at the molecular level, and industrial pilot scale demonstrations. When integrated with process simulation and economic evaluations, these techniques are instrumental in enhancing the efficiency and cost-effectiveness of the capturing processes. While advancements in adsorption-based carbon capture technologies have been notable, their deployment still encounters significant hurdles, including technical, economic, and environmental challenges. Leveraging hybrid systems, renewable energy integration, and the strategic application of emerging machine learning techniques appear promising to address global warming effectively and will consequently be discussed in this investigation.

Metal-Organic Frameworks for Enhanced Hydrogen Generation from Syngas: A Density Functional Theory Approach

Although methane poses environmental concerns, it is employed in hydrogen production processes such as steam-methane reforming (SMR), which has an issue of by-products released. Initiatives are being pursued to address CO and CO2 emissions using carbon capture methods, with the goal of minimizing environmental harm while improving pure hydrogen generation from syngas. In this study, porous coordination network (PCN-250) has been studied for its selective adsorption property towards CO, CO2 and H2O as syngas mixture to obtain pure hydrogen. For this purpose, the trimetallic cluster node Fe2M (where Fe2 represents the 3+ oxidation state and M is Cr(II), Mn(II), Fe(II), Co(II), Ni(II), and Zn(II)) has been considered. Fe(III) in combination with metal atoms like Cr(II), Co(II), or Ni(II) has been found to exhibit enhanced adsorption properties towards CO, CO2 and H2O. The molecule with the strongest interaction was found to be H2O over Fe(III)2Zn(II) cluster and weakest interaction was found between H2 and Fe(III)2Ni(II). Charge transfer, natural bond orbital (NBO) and spin density analyses reveal the electronic structural properties of this combination, leading to enhanced adsorption of CO and CO2.

Comparing the effect of applying different types of amendments on carbon emissions and kinetics of degrading total petroleum hydrocarbons in artificial petroleum-contaminated soil

Contamination by spent engine oil represents a significant global environmental challenge as it poses a major hazard to human health, animals, plants, microorganisms, the soil ecosystem, and aquatic ecosystems. This study assumes that some amendments differ significantly in their ability to degrade petroleum hydrocarbons. Therefore, this incubation study was conducted to investigate the effect of different types of inorganic and organic amendments (zeolite, bone char, banana leaves biochar, and wood chips biochar) on carbon emissions (CO2-C) and the kinetics of total petroleum hydrocarbons (TPHC) degradation in artificial petroleum-contaminated soil. These amendments were added to the soil under study at a dose of 3% (w/w). At the end of the incubation period, applying zeolite, bone char, banana leaves biochar, and wood chips biochar to artificial petroleum-contaminated soil significantly reduced cumulative CO2-C emissions compared to the control. The banana leaves biochar significantly decreased TPHC concentrations in artificial petroleum-contaminated soil compared to the control treatment. At the end of the incubation period, adding banana leaves biochar to the soil showed high degradation efficiencies of TPHC which was 36% higher than soil before incubation. The effectiveness of applying amendments used in this experiment on the degradation of TPHC increase was in the order of banana leaves biochar > bone char > wood chips biochar > control > zeolite. The second-order model described the kinetics of total petroleum hydrocarbons better than the first-order model. Banana leaves biochar added to the soil resulted in a significant increase in the degradation rate constant of total petroleum hydrocarbons (k2) compared with the control. A higher k2 value indicates that TPHC degrades more rapidly. The half-life of TPHC degradation in the soil was decreased significantly by adding banana leaves biochar. According to the second-order equation, the half-lives of control, zeolite, bone char, banana leaves biochar, and wood chips biochar were 4.0, 5.3, 2.7, 1.0, and 3.6 years, respectively. The banana leaves biochar amendment might be cheaper and more environmentally friendly than other organic amendments because it has the high potential for carbon sequestration and remediate petroleum-contaminated soil, which would increase the sustainable use of petroleum-contaminated soil leading to preserving the environment.

Recent Advances of Carbon Capture in Metal-Organic Frameworks: A Comprehensive Review

The excessive emission of greenhouse gases, which leads to global warming and alarms the world, has triggered a global campaign for carbon neutrality. Carbon capture and sequestration (CCS) technology has aroused wide research interest as a versatile emission mitigation technology. Metal-organic frameworks (MOFs), as a new class of high-performance adsorbents, hold great potential for CO2 capture from large point sources and ambient air due to their ultra-high specific surface area as well as pore structure. In recent years, MOFs have made great progress in the field of CO2 capture and separation, and have published a number of important results, which have greatly promoted the development of MOF materials for practical carbon capture applications. This review summarizes the most recent advanced research on MOF materials for carbon capture in various application scenarios over the past six years. The strategies for enhancing CO2 selective adsorption and separation of MOFs are described in detail, along with the development of MOF-based composites. Moreover, this review also systematically summarizes the highly concerned issues of MOF materials in practical applications of carbon capture. Finally, future research on CO2 capture by MOF materials is prospected.

Graph Neural Networks for Carbon Dioxide Adsorption Prediction in Aluminum-Substituted Zeolites

The ability to efficiently predict adsorption properties of zeolites can be of large benefit in accelerating the design process of novel materials. The existing configuration space for these materials is wide, while existing molecular simulation methods are computationally expensive. In this work, we propose a model which is 4 to 5 orders of magnitude faster at adsorption properties compared to molecular simulations. To validate the model, we generated data sets containing various aluminum configurations for the MOR, MFI, RHO and ITW zeolites along with their heat of adsorptions and Henry coefficients for CO2, obtained from Monte Carlo simulations. The predictions obtained from the Machine Learning model are in agreement with the values obtained from the Monte Carlo simulations, confirming that the model can be used for property prediction. Furthermore, we show that the model can be used for identifying adsorption sites. Finally, we evaluate the capability of our model for generating novel zeolite configurations by using it in combination with a genetic algorithm.

Biomedical Metal-Organic Framework Materials: Perspectives and Challenges

Metal-organic framework (MOF) materials are gaining significant interest in biomedical research, owing to their high porosity, crystallinity, and structural and compositional diversity. Their versatile hybrid organic/inorganic chemistry endows MOFs with the capacity to retain organic (drug) molecules, metals, and gases, to effectively channel electrons and photons, to survive harsh physiological conditions such as low pH, and even to protect sensitive biomolecules. Extensive preclinical research has been carried out with MOFs to treat several pathologies and, recently, their integration with other biomedical materials such as stents and implants has demonstrated promising performance in regenerative medicine. However, there remains a significant gap between MOF preclinical research and translation into clinically and societally relevant medicinal products. Here, we outline the intrinsic features of MOFs and discuss how these are suited to specific biomedical applications like detoxification, drug and gas delivery, or as (combination) therapy platforms. We furthermore describe relevant examples of how MOFs have been engineered and evaluated in different medical indications, including cancer, microbial, and inflammatory diseases. Finally, we critically examine the challenges facing their translation into the clinic, with the goal of establishing promising research directions and more realistic approaches that can bridge the translational gap of MOFs and MOF-containing (nano)materials.

CO2 Sorption on Ti-, Zr-, and [Ti,Zr]-Pillared Montmorillonites

Montmorillonite is a layered clay mineral whose modification by pillaring, i.e., insertion of oxide nanoclusters between the layers, yields porous materials of great potential in sorption and catalysis. In the present study, an unrefined industrial bentonite from Kopernica (Slovakia), containing ca. 70% of montmorillonite, was used for the preparation of Ti-, Zr-, and mixed [Ti,Zr]-pillared clay sorbents. The pillared samples were characterized with X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and N2 adsorption at -196 °C and tested for the capacity of CO2 sorption at 0 °C and 1 bar pressure. The experiments revealed that pillared samples sorbed at least four times more CO2 than the parent bentonite. Of the materials tested, the sample pillared with mixed [Ti,Zr] oxide props showed the best performance, which was attributed to its superior microporosity. The results of CO2 adsorption demonstrated that the cost-effective use of crude industrial bentonite as the sorbent precursor is a viable synthesis option. In another experiment, all pillared montmorillonites were subjected to 24 h exposure at room temperature to a flow of dry CO2 and then tested using simultaneous thermal analysis (STA) and the mass spectrometry (MS) analysis of the evolving gases (STA/QMS). It was found that interaction with dry CO2 reduces the amount of bound carbon dioxide and affects the processes of dehydration, dehydroxylation, and the mode of CO2 binding in the pillared structure.

Monte Carlo Simulations of Water Pollutant Adsorption at Parts-per-Billion Concentration: A Study on 1,4-Dioxane

1,4-dioxane, an emerging water pollutant with high production volumes, is a probable human carcinogen. The inadequacy of conventional treatment processes demonstrates the need for an effective remediation strategy. Crystalline nanoporous materials are cost-effective adsorbents due to their high capacity and selective separation in mixtures. This study explores the potential of all-silica zeolites for the separation of 1,4-dioxane from water. These zeolites are highly hydrophobic and can preferentially adsorb nonpolar molecules from mixtures. We investigated six zeolite frameworks (BEA, EUO, FER, IFR, MFI, and MOR) using Monte Carlo simulations in the Gibbs ensemble. The simulations indicate high selectivity by FER and EUO, especially at low pressures, which we attribute to pore sizes and shapes with a greater affinity to 1,4-dioxane. We also demonstrate a Monte Carlo simulation workflow using gauge cells to model the adsorption of an aqueous solution of 1,4-dioxane at a 0.35 ppb concentration. We quantify 1,4-dioxane and water coadsorption and observe selectivities ranging from 1.1 × 105 in MOR to 8.7 × 106 in FER. We also demonstrate that 1,4-dioxane is in the infinite dilution regime in the aqueous phase at this concentration. This simulation technique can be extended to model other emerging water contaminants such as perfluoroalkyl and polyfluoroalkyl substances (PFAS), chlorofluorocarbons, and others, which are also found in extremely low concentrations.

Carbon Dioxide Capture by Emerging Innovative Polymers: Status and Perspectives

A significant amount of research has been conducted in carbon dioxide (CO2) capture, particularly over the past decade, and continues to evolve. This review presents the most recent advancements in synthetic methodologies and CO2 capture capabilities of diverse polymer-based substances, which includes the amine-based polymers, porous organic polymers, and polymeric membranes, covering publications in the last 5 years (2019-2024). It aims to assist researchers with new insights and approaches to develop innovative polymer-based materials with improved capturing CO2 capacity, efficiency, sustainability, and cost-effective, thereby addressing the current obstacles in carbon capture and storage to sooner meeting the net-zero CO2 emission target.

A mechanochemical process to capture and separate carbon dioxide from natural gas using boron nitride nanosheets

Addressing climate change is a critical and pressing matter that requires immediate attention to mitigate its severe repercussions. In order to enhance the capture and separation of carbon dioxide from natural gas and nitrogen gas, it is imperative to develop new capture materials and more efficient storage processes. In this study, we introduce an innovative environmentally friendly storage and separation technique. Through a controlled mechanochemical process, a substantial amount of carbon dioxide (103.6 wt%) was successfully captured within boron nitride. This process also excels at effectively isolating carbon dioxide from a gas mixture containing natural gas (CH4) or nitrogen due to its superior adsorption selectivity for CO2 over the other two gases. The stored carbon dioxide can be released upon heating, and this procedure can be repeated several times (minimum four times), indicating a game changing process in CO2 gas capture and separation technology with the advantages of green, low cost and efficiency.

Research on carbon dioxide capture materials used for carbon dioxide capture, utilization, and storage technology: a review

In recent years, climate change has increasingly become one of the major challenges facing mankind today, seriously threatening the survival and sustainable development of mankind. Dramatically increasing carbon dioxide concentrations are thought to cause a severe greenhouse effect, leading to severe and sustained global warming, associated climate instability and unwelcome natural disasters, melting glaciers and extreme weather patterns. The treatment of flue gas from thermal power plants uses carbon capture, utilization, and storage (CCUS) technology, one of the most promising current methods to accomplish significant CO2 emission reduction. In order to implement the technological and financial system of CO2 capture, which is the key technology of CCUS technology and accounts for 70-80% of the overall cost of CCUS technology, it is crucial to create more effective adsorbents. Nowadays, with the development and application of various carbon dioxide capture materials, it is necessary to review and summarize carbon dioxide capture materials in time. In this paper, the main technologies of CO2 capture are reviewed, with emphasis on the latest research status of CO2 capture materials, such as amines, zeolites, alkali metals, as well as emerging MOFs and carbon nanomaterials. More and more research on CO2 capture materials has used a variety of improved methods, which have achieved high CO2 capture performance. For example, doping of layered double hydroxides (LDH) with metal atoms significantly increases the active site on the surface of the material, which has a significant impact on improving the CO2 capture capacity and performance stability of LDH. Although many carbon capture materials have been developed, high cost and low technology scale remain major obstacles to CO2 capture. Future research should focus on designing low-cost, high-availability carbon capture materials.

CO2 capture using silica-immobilized dicationic ionic liquids with magnetic and non-magnetic properties

The need to find alternative materials to replace aqueous amine solutions for the capture of CO2 in post-combustion technologies is pressing. This study assesses the CO2 sorption capacity and CO2/N2 selectivity of three dicationic ionic liquids with distinct anions immobilized in commercial mesoporous silica support (SBA- 15). The samples were characterized by UART-FTIR, NMR, Raman, FESEM, TEM, TGA, Magnetometry (VSM), BET and BJH. The highest CO2 sorption capacity and CO2/N2 selectivity were obtained for sample SBA@DIL_2FeCl4 [at 1 bar and 25 °C; 57.31 (±0.02) mg CO2/g; 12.27 (±0.72) mg CO2/g]. The results were compared to pristine SBA-15 and revealed a similar sorption capacity, indicating that the IL has no impact on the CO2 sorption capacity of silica. On the other hand, selectivity was improved by approximately 3.8 times, demonstrating the affinity of the ionic liquid for the CO2 molecule. The material underwent multiple sorption/desorption cycles and proved to be stable and a promising option for use in industrial CO2 capture processes.

Recent Progress on Porous Carbons for Carbon Capture

High emission of carbon dioxide (CO2) has caused CO2 levels to reach more than 400 ppm in air and led to a serious climate problem. In addition, in confined spaces such as submarines and aircraft, the CO2 concentration increase in the air caused by human respiration also affects human health. In order to protect the environment and human health, the search for high-performance adsorbents for carbon capture from high and low concentration gas is particularly important. Porous carbon materials, possessing the advantages of low cost and renewability, have set off a boom in the research of porous adsorbents, which have the opportunity to be utilized on a large scale for industrial carbon capture in the future. In this review, we summarize the recent research progress of porous carbons for carbon capture from flue gas and directly from air in the last five years, including activated carbon (AC), heteroatom-modified porous carbon, carbon molecular sieves (CMS), and other porous carbon materials, with a focus on the effects of temperature, water content, and gas flow rate of industrial flue gas on the performance of porous carbon adsorbents. We summarize the preparation strategies of various porous carbons and seek environmental friendly porous carbon materials preparation strategies under the premise of improving the CO2 adsorption capacity and selectivity of porous carbon adsorbents. Based on the effects of real industrial flue gas on adsorbents, we provide new ideas and evaluation methods for the development and preparation of porous carbon materials.

Functional characterization of plant specific Indeterminate Domain (IDD) transcription factors in tomato (Solanum lycopersicum L.)

Plant-specific transcription factors (TFs) are responsible for regulating the genes involved in the development of plant-specific organs and response systems for adaptation to terrestrial environments. This includes the development of efficient water transport systems, efficient reproductive organs, and the ability to withstand the effects of terrestrial factors, such as UV radiation, temperature fluctuations, and soil-related stress factors, and evolutionary advantages over land predators. In rice and Arabidopsis, INDETERMINATE DOMAIN (IDD) TFs are plant-specific TFs with crucial functions, such as development, reproduction, and stress response. However, in tomatoes, IDD TFs remain uncharacterized. Here, we examined the presence, distribution, structure, characteristics, and expression patterns of SlIDDs. Database searches, multiple alignments, and motif alignments suggested that 24 TFs were related to Arabidopsis IDDs. 18 IDDs had two characteristic C2H2 domains and two C2HC domains in their coding regions. Expression analyses suggest that some IDDs exhibit multi-stress responsive properties and can respond to specific stress conditions, while others can respond to multiple stress conditions in shoots and roots, either in a tissue-specific or universal manner. Moreover, co-expression database analyses suggested potential interaction partners within IDD family and other proteins. This study functionally characterized SlIDDs, which can be studied using molecular and bioinformatics methods for crop improvement.

The Overlooked Potential of Sulfated Zirconia: Reexamining Solid Superacidity Toward the Controlled Depolymerization of Polyolefins

Closed-loop recycling via an efficient chemical process can help alleviate the global plastic waste crisis. However, conventional depolymerization methods for polyolefins, which compose more than 50% of plastics, demand high temperatures and pressures, employ precious noble metals, and/or yield complex mixtures of products limited to single-use fuels or oils. Superacidic forms of sulfated zirconia (SZrO) with Hammet Acidity Functions (H0) ≤ - 12 (i.e., stronger than 100% H2SO4) are industrially deployed heterogeneous catalysts capable of activating hydrocarbons under mild conditions and are shown to decompose polyolefins at temperatures near 200 °C and ambient pressure. Additionally, confinement of active sites in porous supports is known to radically increase selectivity, coking and sintering resistance, and acid site activity, presenting a possible approach to low-energy polyolefin depolymerization. However, a critical examination of the literature on SZrO led us to a surprising conclusion: despite 40 years of catalytic study, engineering, and industrial use, the surface chemistry of SZrO is poorly understood. Ostensibly spurred by SZrO's impressive catalytic activity, the application-driven study of SZrO has resulted in deleterious ambiguity in requisite synthetic conditions for superacidity and insufficient characterization of acidity, porosity, and active site structure. This ambiguity has produced significant knowledge gaps surrounding the synthesis, structure, and mechanisms of hydrocarbon activation for optimized SZrO, stunting the potential of this catalyst in olefin cracking and other industrially relevant reactions, such as isomerization, esterification, and alkylation. Toward mitigating these long extant issues, we herein identify and highlight these current shortcomings and knowledge gaps, propose explicit guidelines for characterization of and reporting on characterization of solid acidity, and discuss the potential of pore-confined superacids in the efficient and selective depolymerization of polyolefins.

Mid-temperature CO2 Adsorption over Different Alkaline Sorbents Dispersed over Mesoporous Al2O3

CO2 adsorbents comprising various alkaline sorption active phases supported on mesoporous Al2O3 were prepared. The materials were tested regarding their CO2 adsorption behavior in the mid-temperature range, i.e., around 300 °C, as well as characterized via XRD, N2 physisorption, CO2-TPD and TEM. It was found that the Na2O sorption active phase supported on Al2O3 (originated following NaNO3 impregnation) led to the highest CO2 adsorption capacity due to the presence of CO2-philic interfacial Al-O--Na+ sites, and the optimum active phase load was shown to be 12 wt % (0.22 Na/Al molar ratio). Additional adsorbents were prepared by dispersing Na2O over different metal oxide supports (ZrO2, TiO2, CeO2 and SiO2), showing an inferior performance than that of Na2O/Al2O3. The kinetics and thermodynamics of CO2 adsorption were also investigated at various temperatures, showing that CO2 adsorption over the best-performing Na2O/Al2O3 material is exothermic and follows the Avrami model, while tests under varying CO2 partial pressures revealed that the Langmuir isotherm best fits the adsorption data. Lastly, Na2O/Al2O3 was tested under multiple CO2 adsorption-desorption cycles at 300 and 500 °C, respectively. The material was found to maintain its CO2 adsorption capacity with no detrimental effects on its nanostructure, porosity and surface basic sites, thereby rendering it suitable as a reversible CO2 chemisorbent or as a support for the preparation of dual-function materials.

Novel chitosan-zeolite X composite beads prepared by phase-inversion method for CO2 adsorptive capture

The urgent need to mitigate carbon emissions from industrial heat production has led to the exploration of novel carbon-based materials for carbon capture. Chitosan, a versatile framework, has been widely utilized for embedding many materials such as grafted graphene oxide, zeolite, and activated carbon to enhance the carbon capture capacity of diverse carbon-based materials. Remarkably, the combination of chitosan and zeolite overcomes the inherent drawbacks of powdery zeolite, resulting in improved stability and efficiency in carbon capture applications. In this study, zeolite X-chitosan composite was successfully synthesized using phase inversion method followed by solvent exchange and air drying. The synthesis procedure described in this study presents a notable advantage in terms of simplicity and ease of fabrication. The combination of SEM and XRD analyses provided evidence that the composite exhibited a uniform arrangement of zeolite within the chitosan framework and maintained the original properties of the powdered zeolite. The adsorption capacity of the composite was first investigated by varying mass ratio of zeolite per chitosan. The composite with mass ratio that gave the best adsorption capacity were then tested under various temperatures (-20 °C, 0 °C, 30 °C, and 50 °C) and pressures (1 kPa, 3 kPa, 5 kPa, and 30 kPa). The application of different adsorption models was also employed to simulate the breakthrough curves. Furthermore, the material also underwent multiple continuous adsorption-desorption cycles showing its potential for repeated rechargeability. In contrast, the synthesis and characterization of copper ion-exchanged composite yielded significant drop in adsorption capacity, likely due to the formation of ligands or the inherent reactivity of Cu2+ ions towards hydroxide.

Coal fly ash and bottom ash low-cost feedstocks for CO2 reduction using the adsorption and catalysis processes

Combustion of fossil fuels, industry and agriculture sectors are considered as the largest emitters of carbon dioxide. In fact, the emission of CO2 greenhouse gas has been considerably intensified during the last two decades, resulting in global warming and inducing variety of adverse health effects on human and environment. Calling for effective and green feedstocks to remove CO2, low-cost materials such as coal ashes "wastes-to-materials", have been considered among the interesting candidates of CO2 capture technologies. On the other hand, several techniques employing coal ashes as inorganic supports (e.g., catalytic reduction, photocatalysis, gas conversion, ceramic filter, gas scrubbing, adsorption, etc.) have been widely applied to reduce CO2. These processes are among the most efficient solutions utilized by industrialists and scientists to produce clean energy from CO2 and limit its continuous emission into the atmosphere. Herein, we review the recent trends and advancements in the applications of coal ashes including coal fly ash and bottom ash as low-cost wastes to reduce CO2 concentration through adsorption and catalysis processes. The chemical routes of structural modification and characterization of coal ash-based feedstocks are discussed in details. The adsorption and catalytic performance of the coal ashes derivatives towards CO2 selective reduction to CH4 are also described. The main objective of this review is to highlight the excellent capacity of coal fly ash and bottom ash to capture and selective conversion of CO2 to methane, with the aim of minimizing coal ashes disposal and their storage costs. From a practical view of point, the needs of developing new advanced technologies and recycling strategies might be urgent in the near future to efficient make use of coal ashes as new cleaner materials for CO2 remediation purposes, which favourably affects the rate of global warming.

Impact of some amendments on kinetics of leaching dissolved organic carbon and ammonium in calcareous sandy soil under vinasse addition

The access of vinasse leachates to water bodies and groundwater exacerbates environmental problems, especially eutrophication. Therefore, a column experiment was performed to examine the effect of adding zeolite (ZL), bone char (BC), and wood chips biochar (WCB) in the presence of vinasse on carbon dioxide (CO2) emission, leaching dissolved organic carbon (DOC) and ammonium (NH4+) in calcareous sandy soil, as well as studying the kinetics of leaching dissolved organic carbon and ammonium. This column experiment contains four treatments: soil alone (CK), soil + zeolite (SZL), soil + bone char (SBC), and soil + wood chips biochar (SWCB). These amendments were applied to the soil at a level of 4%. Vinasse was added to all treatments at a level of 13 mL per column. The leached total cumulative DOC and total cumulative soluble ammonium amounts decreased significantly with applying ZL, BC, and WCB compared with the soil alone. The effectiveness of these amendments in lowering the total cumulative DOC leaching is in the order of SBC > SWCB > SZL > CK. However, the effectiveness of these amendments in decreasing the total cumulative NH4+ leaching is in the order of SZL > SWCB > SBC > CK. The rate constant (k) of DOC leaching decreased significantly with the application of bone char compared to soil alone treatment. In the presence of vinasse, the apparent half-life of leached DOC from the soil was 8.1, 12.9, 36.7, and 15.5 days for soil CK, SZL, SBC, and SWCB treatments, respectively. Half-life values of leached soluble ammonium from the soil in the presence of vinasse addition were 10.1, 39.5, 28.5, and 37.9 days for CK, SZL, SBC, and SWCB treatments, respectively. Amending soil with BC increased significantly the phosphorus availability, however, applying ZL and BC caused a significant increase in the available potassium in calcareous sandy soil compared to the control treatment. According to these results, it is recommended not to add vinasse alone to sandy soils, but it is preferred to be co-applied with BC amendment at the level of 4% better than ZL and WCB. This would decrease leaching DOC and ammonium to the water table and groundwater as well as enhance nutrient retention in the soil, which in turn, plays a vital role in reducing the harmful effect of vinasse and improving soil fertility.

Nitrogen-Doped Starbons®: Methodology Development and Carbon Dioxide Capture Capability

Five nitrogen sources (glycine, β-alanine, urea, melamine and nicotinamide) and three heating methods (thermal, monomodal microwave and multimodal microwave) are used to prepare nitrogen-doped Starbons® derived from starch. The materials are initially produced at 250-300 °C (SNx 300y ), then heated in vacuo to 800 °C to produce nitrogen-doped SNx 800y 's. Melamine gives the highest nitrogen incorporation without destroying the Starbon® pore structure and the microwave heating methods give higher nitrogen incorporations than thermal heating. The carbon dioxide adsorption capacities of the nitrogen-doped Starbons® determined gravimetrically, in many cases exceed those of S300 and S800. The carbon dioxide, nitrogen and methane adsorption isotherms of the most promising materials are measured volumetrically. Most of the nitrogen-doped materials show higher carbon dioxide adsorption capacities than S800, but lower methane and nitrogen adsorption capacities. As a result, the nitrogen-doped Starbons® exhibit significantly enhanced carbon dioxide versus nitrogen and methane versus nitrogen selectivities compared to S800.

Importance of Bridging Molecular and Process Modeling to Design Optimal Adsorbents for Large-Scale CO2 Capture

ConspectusCarbon capture, utilization, and storage have been identified as key technologies to decarbonize the energy and industrial sectors. Although postcombustion CO2 capture by absorption in aqueous amines is a mature technology, the required high regeneration energy, losses due to degradation and evaporation, and corrosion carry a high economic cost, precluding this technology to be used today at the scale required to mitigate climate change. Solid adsorbent-based systems with high CO2 capacities, high selectivity, and lower regeneration energy are becoming an attractive alternative for this purpose. Conscious of this opportunity, the search for optimal adsorbents for the capture of CO2 has become an urgent task. To accurately assess the performance of CO2 separation by adsorption at the needed scale, adsorbents should be synthesized and fully characterized under the required operating conditions, and the proper design and simulation of the process should be implemented along with techno-economic and environmental assessments. Several works have examined pure CO2 single-component adsorption or binary mixtures of CO2 with nitrogen for different families of adsorbents, primarily addressing their CO2 adsorption capacity and selectivity; however, very limited data is available under other conditions and/or with impurities, mainly due to the intensive experimental (modeling) efforts required for the large number of adsorbents to be studied, posing a challenge for their assessment under the needed conditions. In this regard, molecular simulations can be employed in synergy with experiments, reliably generating missing adsorption properties of mixtures while providing understanding at the molecular level of the mechanism of the adsorption process.This Account provides an outlook on strategies used for the rational design of materials for CO2 capture from different sources from the understanding of the adsorption mechanism at the molecular level. We illustrate with practical examples from our work and others' work how molecular simulations can be reliably used to link the molecular knowledge of novel adsorbents for which limited data exist for CO2 capture adsorption processes. Molecular simulation results of different adsorbents, including MOFs, zeolites, and carbon-based and silica-based materials, are discussed, focusing on understanding the role of physical and chemical adsorption obtained from simulations and quantifying the impact of impurities in the performance of the materials. Furthermore, simulation results can be used for screening adsorbents from basic key performance indicators, such as cycling the working capacity, selectivity, and energy requirement, or for feeding detailed dynamic models to assess their performance in swing adsorption processes on the industrial scale, additionally including monetized performance indicators such as operating expenses, equipment sizes, and compression cost. Moreover, we highlight the role of molecular simulations in guiding strategies for improving the performance of these materials by functionalization with amines or creating hybrid solid materials. We show how integrating models at different scales provides a robust and reliable assessment of the performance of the adsorbent materials under the required industrial conditions, rationally guiding the search for best performers. Trends in additional computational resources that can be used, including machine learning, and perspectives on practical requirements for leveraging CO2 capture adsorption technologies on the needed scale are also discussed.

The Application of Biochar for CO2 Capture: Influence of Biochar Preparation and CO2 Capture Reactors

This work investigates three types of biochar (bamboo charcoal, wood pellet, and coconut shell) for postcombustion carbon capture. Each biochar is structurally modified through physical (H2O, CO2) and chemical (ZnCl2, KOH, H3PO4) activation to improve carbon capture performance. Three methods (CO2 adsorption isotherms, CO2 fixed-bed adsorption, and thermogravimetric analysis) are used to determine the CO2 adsorption capacity. The results show that a more than 2.35 mmol·g-1 (1 bar, 298 K) CO2 capture capacity was achieved using the activated biochar samples. It is also demonstrated that the CO2 capture performance by biochar depends on multiple surface and textural properties. A high surface area and pore volume of biochar resulted in an enhanced CO2 capture capacity. Furthermore, the O*/C ratio and pore width show a negative correlation with the CO2 capture capacity of biochars.

Electrifying Carbon Capture by Developing Nanomaterials at the Interface of Molecular and Process Engineering

ConspectusCarbon capture is an indispensable step toward closing the anthropogenic carbon cycle. However, the large-scale implementation of conventional thermochemical carbon capture technologies is hindered by their low energy efficiency, limited sorbent stability, and complexity in infrastructure integration. A mechanistically different alternative, commonly known as electrochemically mediated carbon capture (EMCC), has garnered increasing research traction over the past few years and relies on electrochemical stimuli instead of thermal or pressure swings for the capture and release of carbon dioxide (CO2). Compared to conventional methods, EMCC can be operated under mild conditions driven by intermittent renewable energy sources and has a flexible design to meet the multiscale demands of carbon capture, offering a potentially sustainable, energy-efficient, and cost-effective solution to CO2 concentration from dilute mixtures or the ambient environment.Nanomaterials have played a crucial role in carbon capture research. For instance, nanoporous materials can provide increased free volumes, surface areas, and active sites for carbon capture through physical or chemical adsorption from the gaseous phase. In contrast, EMCC relies on chemical absorption via acid-base interactions using solubilized CO2 in electrolytes. Therefore, most EMCC sorbents and mediators explored so far have been developed as molecules rather than nanomaterials. In recent years, our team has been focusing on electrifying the carbon capture processes at the molecular, materials, and process levels. We seek to address the most pressing issues associated with EMCC, either in fixed-bed or flow systems, that prevent their practical use. These issues include parasitic reactions with molecular oxygen, insufficient electrode capacity utilization, sorbent crossover, etc. To address these problems, there is an urgent need to develop rationally designed nanomaterials at the interface of molecular electrochemistry and device engineering. This Account provides an overview of recent progress on developing new chemistries and engineering batch/continuous processes for EMCC. We discuss the limitations of current EMCC technology and emphasize why nanomaterials are critical for electrifying carbon capture. First, we introduce the design principles for EMCC sorbents based on redox-active organic CO2 carriers and discuss metrics for their performance evaluation. Second, we showcase how molecular design can tackle problems of sorbent solubility, oxygen stability, and electrolyte compatibility in EMCC. Third, we discuss the early results of nanomaterials as solid sorbents in fixed-bed systems, nonswelling membranes for flow systems, and high-surface-area gas-liquid contactors. Finally, building on the foundation we established through our prior work, we offer perspectives on future directions for nanomaterials to help address the challenges in EMCC.

CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach

The present work studies the adsorption of CO2 using a zeolitic industrial molecular sieve (IMS) with a high surface area. The effect of the CO2 feed concentration and the adsorption temperature in conjunction with multiple adsorption-desorption cycles was experimentally investigated. To assess the validity of the experimental results, theoretical calculations based on well-established equations were employed and the values of equilibrium, kinetic, and thermodynamic parameters are presented. Three additional column kinetic models were applied to the data obtained experimentally, in order to predict the breakthrough curves and thus facilitate process design. Results showed a negative correlation between temperature and adsorption capacity, indicating that physical adsorption takes place. Theoretical calculations revealed that the Langmuir isotherm, the Bangham kinetic model (i.e., pore diffusion is the rate-determining step), and the Thomas and Yoon-Nelson models were suitable to describe the CO2 adsorption process by the IMS. The IMS adsorbent material maintained its high CO2 adsorption capacity (>200 mg g-1) after multiple adsorption-desorption cycles, showing excellent regenerability and requiring only a mild desorption treatment (200 °C for 15 min) for regeneration.

Valorization of wipe wastes for the synthesis of microporous carbons and their application in CO2 capture, gas separation and H2-storage

Wipe wastes have been used as a cellulosic source to synthesize biochars. Prior to the synthesis of the adsorbents by the pyrolysis of wipes wastes, this waste was treated to remove the pathogenic agents. Then, the wipe wastes were pyrolyzed between 500 and 900 °C to obtain biochars, whose microporosity increased proportionally to the pyrolysis temperature, achieving a maximum CO2-adsorption uptake of 2.53 mmol/g at a pressure of 760 mm of Hg and 25 °C for the biochar pyrolized at 900 °C. The synthesized biochars are also highly selective towards CO2-adsorption in CO2/N2 or CO2/H2 mixtures. Hence, these adsorbents have shown a great potential to be used in flue gas treatment and H2-purification processes. Biochar treatment with KOH further improves microporosity due to chemical activation although the addition of a large amount of KOH leads to excessive microporosity causing a collapse in the pore structure and decreasing CO2-adsorption capacity.

Fixing CO2 under Atmospheric Conditions and Dual Functional Heterogeneous Catalysis Employing Cu MOFs: Polymorphism, Single-Crystal-to-Single-Crystal (SCSC) Transformation and Magnetic Studies

New copper compounds, [Cu(C14H8O6)(C10H8N2)(H2O)] (1), [Cu(C14H8O6)(C10H8N2)(H2O)]·(C3H7ON)2 (2), [Cu(C14H8O6)(C10H8N2)(H2O)2]·(C3H7ON) (3), [Cu(C14H8O6)(C10H8N4)] (4), and [Cu(C14H8O6)(C10H8N4)]·(H2O) (5), were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 4,4'-bipyridine (1-3) and 4,4'-azopyridine (4-5) as the secondary ligands. Single-crystal studies indicated that compounds 1-4 have two-dimensional layer structures and compound 5 has a three-dimensional structure. Compounds 1-3 were isolated from the same reaction mixture but by varying the time of reaction. The framework structures of compounds 1-3 are similar and may be considered as polymorphic structures. Compounds 4 and 5 can also be considered polymorphic with a change in dimensionality of the structure. Compounds 1-3 can be formed through a single-crystal-to-single-crystal transformation under a suitable solvent mixture. The Cu center was explored for the Lewis acid-catalyzed cycloaddition reaction of epoxide and CO2 under ambient conditions in a solventless condition and also for the synthesis of propargylamine derivatives by three-component coupling reactions (A3 coupling) in a DCM medium. The Lewis basic functionality of the MOF (-N═N- group) has been explored for the Henry reaction (aldol condensation) in a solventless condition. In all of the catalytic reactions, good yields and recyclability were observed. The magnetic studies indicated that compounds 1 and 4 have antiferromagnetic interactions and compound 5 has ferromagnetic interactions. The present studies illustrated the rich diversity that the copper-containing compounds exhibit in extended framework structures.

Combination of natural silica and alumina sources for synthesis of MCM-22 zeolite

Zeolite has become a promising material that can potentially play a pivotal role in resolving environmental crises. Among zeolite families, MCM-22 zeolite shows outstanding intrinsic properties associated with the topology and porous structure, offering ion-exchange advantages for catalytic activity processes. The synthesis of MCM-22 zeolite becomes challenging when concerning the cost and catalytic performance. To overcome this bottleneck, we demonstrate a sustainable route of a hydrothermal process using natural resources as starting materials. Rice husk from agricultural waste was used as a silica source while natural clays (kaolin and bentonite) were applied as alumina sources. The products from natural sources were compared with the use of commercial starting materials, e.g., NaAlO2 (for alumina) and Na2SiO3 and TEOS (for silica), in points of crystal, compositional, and morphological views. We showed that the high purity of MCM-22 zeolite can be obtained from rice husk silica (RHS) and aluminosilicate gel (ASG) extracted from kaolin, while the use of ASG extracted from bentonite tended to be unsuitable to generate the zeolite formation. We also studied the effects of reaction time and the ratio of RHS/ASG on the crystallinity and surface area of MCM-22. The architecture and acidity of an optimal product were explored by Nuclear magnetic resonance spectroscopy and Temperature-programmed desorption of ammonia, demonstrating the success of achieving well acidity.

Carbon Capture Using Porous Silica Materials

As the primary greenhouse gas, CO₂ emission has noticeably increased over the past decades resulting in global warming and climate change. Surprisingly, anthropogenic activities have increased atmospheric CO₂ by 50% in less than 200 years, causing more frequent and severe rainfall, snowstorms, flash floods, droughts, heat waves, and rising sea levels in recent times. Hence, reducing the excess CO₂ in the atmosphere is imperative to keep the global average temperature rise below 2 °C. Among many CO₂ mitigation approaches, CO₂ capture using porous materials is considered one of the most promising technologies. Porous solid materials such as carbons, silica, zeolites, hollow fibers, and alumina have been widely investigated in CO₂ capture technologies. Interestingly, porous silica-based materials have recently emerged as excellent candidates for CO₂ capture technologies due to their unique properties, including high surface area, pore volume, easy surface functionalization, excellent thermal, and mechanical stability, and low cost. Therefore, this review comprehensively covers major CO₂ capture processes and their pros and cons, selecting a suitable sorbent, use of liquid amines, and highlights the recent progress of various porous silica materials, including amine-functionalized silica, their reaction mechanisms and synthesis processes. Moreover, CO₂ adsorption capacities, gas selectivity, reusability, current challenges, and future directions of porous silica materials have also been discussed.

Experimental and Computational Mechanisms that Govern Long-Term Stability of CO2-Adsorbed ZIF-8-Based Porous Liquids

Porous liquids (PLs) based on the zeolitic imidazole framework ZIF-8 are attractive systems for carbon capture since the hydrophobic ZIF framework can be solvated in aqueous solvent systems without porous host degradation. However, solid ZIF-8 is known to degrade when exposed to CO₂ in wet environments, and therefore the long-term stability of ZIF-8-based PLs is unknown. Through aging experiments, the long-term stability of a ZIF-8 PL formed using the water, ethylene glycol, and 2-methylimidazole solvent system was systematically examined, and the mechanisms of degradation were elucidated. The PL was found to be stable for several weeks, with no ZIF framework degradation observed after aging in N₂ or air. However, for PLs aged in a CO₂ atmosphere, formation of a secondary phase occurred within 1 day from the degradation of the ZIF-8 framework. From the computational and structural evaluation of the effects of CO₂ on the PL solvent mixture, it was identified that the basic environment of the PL caused ethylene glycol to react with CO₂ forming carbonate species. These carbonate species further react within the PL to degrade ZIF-8. The mechanisms governing this process involves a multistep pathway for PL degradation and lays out a long-term evaluation strategy of PLs for carbon capture. Additionally, it clearly demonstrates the need to examine the reactivity and aging properties of all components in these complex PL systems in order to fully assess their stabilities and lifetimes.

Unveiling Unexpected Modulator-CO2 Dynamics within a Zirconium Metal-Organic Framework

Carbon capture, storage, and utilization (CCSU) represents an opportunity to mitigate carbon emissions that drive global anthropogenic climate change. Promising materials for CCSU through gas adsorption have been developed by leveraging the porosity, stability, and tunability of extended crystalline coordination polymers called metal-organic frameworks (MOFs). While the development of these frameworks has yielded highly effective CO₂ sorbents, an in-depth understanding of the properties of MOF pores that lead to the most efficient uptake during sorption would benefit the rational design of more efficient CCSU materials. Though previous investigations of gas-pore interactions often assumed that the internal pore environment was static, discovery of more dynamic behavior represents an opportunity for precise sorbent engineering. Herein, we report a multifaceted in situ analysis following the adsorption of CO₂ in MOF-808 variants with different capping agents (formate, acetate, and trifluoroacetate: FA, AA, and TFA, respectively). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis paired with multivariate analysis tools and in situ powder X-ray diffraction revealed unexpected CO₂ interactions at the node associated with dynamic behavior of node-capping modulators in the pores of MOF-808, which had previously been assumed to be static. MOF-808-TFA displays two binding modes, resulting in higher binding affinity for CO₂. Computational analyses further support these dynamic observations. The beneficial role of these structural dynamics could play an essential role in building a deeper understanding of CO₂ binding in MOFs.

Carbon dioxide separation and capture by adsorption: a review

Rising adverse impact of climate change caused by anthropogenic activities is calling for advanced methods to reduce carbon dioxide emissions. Here, we review adsorption technologies for carbon dioxide capture with focus on materials, techniques, and processes, additive manufacturing, direct air capture, machine learning, life cycle assessment, commercialization and scale-up.

A review of piezoelectric MEMS sensors and actuators for gas detection application

Piezoelectric microelectromechanical system (piezo-MEMS)-based mass sensors including the piezoelectric microcantilevers, surface acoustic waves (SAW), quartz crystal microbalance (QCM), piezoelectric micromachined ultrasonic transducer (PMUT), and film bulk acoustic wave resonators (FBAR) are highlighted as suitable candidates for highly sensitive gas detection application. This paper presents the piezo-MEMS gas sensors' characteristics such as their miniaturized structure, the capability of integration with readout circuit, and fabrication feasibility using multiuser technologies. The development of the piezoelectric MEMS gas sensors is investigated for the application of low-level concentration gas molecules detection. In this work, the various types of gas sensors based on piezoelectricity are investigated extensively including their operating principle, besides their material parameters as well as the critical design parameters, the device structures, and their sensing materials including the polymers, carbon, metal-organic framework, and graphene.

One Ca2+ Site in CaNaY Zeolite Can Attach Three CO2 Molecules

To design efficient CO₂ capture materials, it is necessary to ensure a high adsorption capacity. We recently reported that one Na⁺ site in NaY zeolite can attach two CO₂ molecules. However, the process is not suitable for practical use because it proceeds at a low temperature. Here, we present results on CO₂ adsorption on CaNaY zeolites, demonstrating that one Ca²⁺ site can attach three CO₂ molecules. The ν₃(¹³CO₂) mode arising from the natural ¹³C abundance allows for easy infrared monitoring of the processes: it appears at 2298, 2294, and 2291 cm^-1 for the complexes with one, two, and three CO₂ ligands, respectively. The ¹²CO₂ molecules in the polyligand complexes interact vibrationally, leading to the split of the ν₃(¹²CO₂) modes. At ambient temperature, Ca²⁺(CO₂)₂ complexes predominate at >1 mbar CO₂ and triligand species begin to form at 65 mbar. The obtained results show that CaY zeolites can be very effective CO₂ capture materials.

Low-concentration CO2 capture using metal-organic frameworks - current status and future perspectives

The ever-increasing atmospheric CO₂ level is considered to be the major cause of climate change. Although the move away from fossil fuel-based energy generation to sustainable energy sources would significantly reduce the release of CO₂ into the atmosphere, it will most probably take time to be fully implemented on a global scale. On the other hand, capturing CO₂ from emission sources or directly from the atmosphere are robust approaches that can reduce the atmospheric CO₂ concentration in a relatively short time. Here, we provide a perspective on the recent development of metal-organic framework (MOF)-based solid sorbents that have been investigated for application in CO₂ capture from low-concentration (<10 000 ppm) CO₂ sources. We summarized the different sorbent engineering approaches adopted by researchers, both from the sorbent development and processing viewpoints. We also discuss the immediate challenges of using MOF-based CO₂ sorbents for low-concentration CO₂ capture. MOF-based materials, with tuneable pore properties and tailorable surface chemistry, and ease of handling, certainly deserve continued development into low-cost, efficient CO₂ sorbents for low-concentration CO₂ capture.

Colloidal Stabilization of Submicron-Sized Zeolite NaA in Ethanol-Water Mixtures for Nanostructuring into Thin Films and Nanofibers

Despite the growing use of organic or mixed solvents in zeolite processing, most studies focus only on aqueous suspension systems. We investigated the colloidal characteristics of submicron-sized zeolite NaA in mixed ethanol-water solvents. The effects of the mixing ratio of solvents and various additives on the dispersion of the zeolite powders were studied. The zeolite NaA particles were destabilized in solvent mixtures at a high ethanol-to-water ratio, a reduction in the zeta potential was observed, and the destabilization was rationalized by the Derjaguin, Landau, Verwey, Overbeek (DLVO) theory. An improved stabilization of the zeolite NaA suspensions was achieved in ethanol-rich solvent mixtures using nonionic low molecular weight organic additives, but not with their ionic counterparts such as anionic, cationic surfactants or inorganic acids or bases. Polyethylene glycol (PEG)-400 was found to be a good dispersant for the submicron-sized zeolite NaA particles in the ethanol-water mixtures, which was attributed to its interaction with the zeolite surface, leading to an increased zeta potential. The PEG-stabilized zeolite suspensions led to low suspension viscosities as well as uniform and consistent spin-coated films.

Effect of calcium on enhanced carbon capture potential of coal fly ash zeolites. Part II: a study on the adsorption mechanisms

Coal fly ash zeolites (CFAZs) of type X with low (Na-X) and medium (Na-Ca-X) content of calcium were synthesized by alkaline conversion of lignite coal fly ash generated by combustion of lignite with lower and higher limestone amounts, extracted from different coal deposits and burned in separate thermal power plants. The concentration and state of Ca in the zeolites were investigated by energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS). CFAZs Na-Ca-X with a medium Ca-content were found to outperform their lower calcium counterparts Na-X in terms of carbon capture capacity. This provoked our research interest in elucidating the role of Ca in the CO₂ retaining mechanism. CFAZs Na-X and Na-Ca-X were studied in consecutive dynamic adsorption cycles, after thermal regeneration at a temperature of 80 °C, at which only the physically adsorbed CO₂ molecules can be released. Desorption was investigated by thermogravimetric TG-DTG analyses over a wide temperature range. In situ Fourier-transform infrared (FTIR) spectroscopy was performed to elucidate the structural features of Na-X and Na-Ca-X CFAZs and the types of their accessible adsorption sites. It was found that the role of Ca is to increase the number of accessible Na⁺ cations in S_II and S_III positions in the zeolites where they can simultaneously adsorb two CO or CO₂ molecules, which benefits their adsorption capacity. This study raises an issue on coal ash classification for the synthesis of zeolites with carbon capture applications.

In situ activation of green sorbents for CO2 capture upon end group backbiting

Thermolysis of a urethane end group was observed as a first time phenomenon during activation. This unzipping mechanism revealed a new amine tethering point producing a diamine-terminated oligourea ([10]-OU), acting as a green sorbent for CO₂ capturing. The oligomer backbites its end group to form propylene carbonate (PC), as proved by in situ TGA-MS, which can reflect the polymer performance by maximizing its capturing capacity. Cross polarization magic angle spinning (CP-MAS) NMR spectroscopy verified the formation of the proven ionic carbamate (1:2 mechanism) with a chemical shift at 161.7 ppm due to activation desorption at higher temperatures, viz., 100 °C (in vacuo) accompanied with bicarbonate ions (1:1 mechanism) with a peak centered at 164.9 ppm. Fortunately, the amines formed from in situ thermolysis explain the abnormal behavior (carbamates versus bicarbonates) of the prepared sample. Finally, ex situ ATR-FTIR proved the decomposition of urethanes, which can be confirmed by the disappearance of the pre-assigned peak centered at 1691 cm^-1. DFT calculations supported the thermolysis of the urethane end group at elevated temperatures, and provided structural insights into the formed products.