Effects of a dental adhesive incorporating antibacterial monomer on the growth, adherence and membrane integrity of Streptococcus mutans

Novel bioactive dental restorations to inhibit secondary caries in enamel and dentin under oral biofilms

OBJECTIVE

To provide the first review on cutting-edge research on the development of new bioactive restorations to inhibit secondary caries in enamel and dentin under biofilms. State-of-the-art bioactive and therapeutic materials design, structure-property relationships, performance and efficacies in oral biofilm models.

DATA, SOURCES AND STUDY SELECTION

Researches on development and assessment new secondary caries inhibition restorations via in vitro and in vivo biofilm-based secondary caries models were included. The search of articles was carried out in Web of Science, PubMed, Medline and Scopus.

CONCLUSIONS

Based on the found articles, novel bioactive materials are divided into different categories according to their remineralization and antibacterial biofunctions. In vitro and in vivo biofilm-based secondary caries models are effective way of evaluating the materials efficacies. However, new intelligent and pH-responsive materials were still urgent need. And the materials evaluation should be performed via more clinical relevant biofilm-based secondary caries models.

CLINICAL SIGNIFICANCE

Secondary caries is a primary reason for dental restoration failures. Biofilms produce acids, causing demineralization and secondary caries. To inhibit dental caries and improve the health and quality of life for millions of people, it is necessary to summarize the present state of technologies and new advances in dental biomaterials for preventing secondary caries and protecting tooth structures against oral biofilm attacks. In addition, suggestions for future studies are provided.

Triclosan to Improve the Antimicrobial Performance of Universal Adhesives

To solve the proble ms of composite restoration failure caused by secondary caries, this study reports a light curable antibacterial triclosan derivative (TCS-IH), which was synthesized and added to the existing commercial universal adhesive to achieve a long-term antibacterial effect The effect of mixing different mass percentages of TCS-IH on the bond strength of dentin was also investigated.TCS-IH was synthesized by solution polymerization and characterized by nuclear magnetic resonance hydrogen spectroscopy (1H NMR) and Fourier transform infrared (FTIR) spectroscopy. Two commercial universal adhesives, Single Bond Universal and All Bond Universal, were selected and used as the control group, and universal adhesives with different mass percentages (1 wt%, 3 wt%, 5 wt% and 7 wt%) of TCS-IH were used as the experimental group. The antibacterial properties were analysed by means of colony count experiments, biofilm formation detection, plotting of growth curves, biofilm metabolic activity detection, insoluble extracellular polysaccharide measurements and observations by confocal laser scanning microscopy and scanning electron microscopy (SEM). The effect of adhesives on biofilm formation, metabolism, extracellular matrix production, distribution of live and dead bacteria, and bacterial morphology of Streptococcus mutans (S. mutans) was analysed. The mechanical properties were evaluated by the degree of conversion and microtensile bonding strength under different conditions. Its biosafety was tested. We found that the addition of TCS-IH significantly improved the antibacterial performance of the universal adhesive, with the 5 wt% and 7 wt% groups showing the best antibacterial effect and effectively inhibiting the formation of biofilm. In addition, the adhesive strength test results showed that there was no statistical difference (p < 0.05) in the microtensile bond strength measured under various factors in all experimental groups except for the 7 wt% group in the self-etch bonding mode, and all of them had good biosafety. In summary, the 5 wt% group of antibacterial monomer TCS-IH was selected as the optimum addition to the universal adhesive to ensure the antimicrobial properties of the universal adhesive and the stability and durability of the adhesive interface. This study provides a reference for the clinical application of adhesives with antimicrobial activity to improve the stability and durability of adhesive restorations.

Effect of the Modified Methacrylate-Based Root Canal Sealer in Single-Cone Technique

This study aimed to modify EndoREZ with 2.5% dimethylaminododecyl methacrylate (DMADDM) and 1% magnetic nanoparticles (MNP) to study its sealing property, penetration and long-term antibacterial and therapeutic effect in the single-cone technique (SCT) compared with EndoREZ and iRoot SP. Thirty single-root human maxillary premolars were assigned into three groups and obturated with three different root canal sealers by SCT. Every specimen was then scanned using micro-CT to analyze void fraction, and void volumes and confocal laser scanning microscope (CLSM) was used to study the dentin penetration. The long-term antimicrobial effects were tested in vitro before and after aging 1 and 4 weeks by the single-strain Enterococcus faecalis biofilm model. In addition, the beagle canine model of apical periodontitis (AP) was utilized to judge and compare the therapeutic effect of three sealers in SCT. The void fraction and void volumes of the modified root canal sealer were not significantly different from iRoot SP (p > 0.05) but were lower than EndoREZ (p < 0.05). The modified root canal sealant displayed a greater penetration, long-term antibacterial property, and treatment effect than the other groups (p < 0.05). This indicated that after being modified with DMADDM and MNP, it showed better performance in SCT.

Novel antibacterial low-shrinkage-stress resin-based cement

OBJECTIVE

A low-shrinkage-stress resin-based cement with antibacterial properties could be beneficial to create a cement with lower stress at the tooth-restoration interface, which could help to enhance the longevity of the fixed dental restoration by reducing microleakage and recurrent caries. To date, there has been no report on the development of a low-shrinkage-stress and bio-interactive cement. Therefore, the objectives of this study were to develop a novel low-shrinkage-stress resin-based cement containing dimethylaminohexadecyl methacrylate (DMAHDM) and investigate the mechanical and antibacterial properties for the first time.

METHODS

The monomers urethane dimethacrylate (UDMA) and triethylene glycol divinylbenzyl ether (TEG-DVBE) were combined and denoted as UV resin. Three cements were fabricated: (1) UV+ 0%DMAHDM (experimental control); (2) UV+ 3%DMAHDM, (3) UV+ %5DMAHDM. RelyX Ultimate cement was used as commercial control. Mechanical properties and Streptococcus mutans (S. mutans) biofilms growth on cement were evaluated.

RESULTS

The novel bio-interactive cement demonstrated excellent antibacterial and mechanical properties. Compared to commercial and experimental controls, adding DMAHDM into the UV cement significantly reduced colony forming unit (CFU) counts by approximately 7 orders of magnitude, metabolic activities from 0.29 ± 0.03 A₅₄₀/cm² to 0.01 ± 0.01 A₅₄₀/cm², and lactic acid production from 22.3 ± 0.74 mmol/L to 1.2 ± 0.27 mmol/L (n = 6) (p < 0.05). The low-shrinkage-stress cement demonstrated a high degree of conversion of around 70 %, while reducing the shrinkage stress by approximately 60%, compared to a commercial control (p < 0.05).

CONCLUSIONS

The new antibacterial low-shrinkage-stress resin-based cement provides strong antibacterial action and maintains excellent mechanical properties with reduced polymerization shrinkage stress.

CLINICAL SIGNIFICANCE

A low-shrinkage-stress resin-based cement containing DMAHDM was developed with potent antibacterial effects and promising mechanical properties. This cement may potentially enhance the longevity of fixed dental restoration such as a dental crown, inlay, onlay, and veneers through its excellent mechanical properties, low shrinkage stress, and strong antibacterial properties.

Degradation and Stabilization of Resin-Dentine Interfaces in Polymeric Dental Adhesives: An Updated Review

Instability of the dentine-resin interface is owed to the partial/incomplete penetration of the resin adhesives in the collagen fibrils. However, interfacial hydrolysis of the resin-matrix hybrid layer complex activates the collagenolytic and esterase enzymes that cause the degradation of the hybrid layer. Adequate hybridization is often prevented due to the water trapped between the interfibrillar spaces of the collagen network. Cyclic fatigue rupture and denaturation of the exposed collagen fibrils have been observed on repeated application of masticatory forces. To prevent interfacial microstructure, various approaches have been explored. Techniques that stabilize the resin–dentine bond have utilized endogenous proteases inhibitors, cross linking agents’ incorporation in the exposed collagen fibrils, an adhesive system free of water, and methods to increase the monomer penetration into the adhesives interface. Therefore, it is important to discover and analyze the causes of interfacial degradation and discover methods to stabilize the hybrid layer to execute new technique and materials. To achieve a predictable and durable adhesive resin, restoration is a solution to the many clinical problems arising due to microleakage, loss of integrity of the restoration, secondary caries, and postoperative sensitivity. To enhance the longevity of the resin-dentine bond strength, several experimental strategies have been carried out to improve the resistance to enzymatic degradation by inhibiting intrinsic collagenolytic activity. In addition, biomimetic remineralization research has advanced considerably to contemporary approaches of both intrafibrillar and extrafibrillar remineralization of dental hard tissues. Thus, in the presence of biomimetic analog complete remineralization of collagen, fibers are identified.

A multi-functional dentine bonding system combining a phosphate monomer with eugenyl methacrylate

OBJECTIVE

The tooth-resin composite interface is frequently associated with failure because of microbial contamination, hydrolytic and collagenolytic degradation. Thus, designing a dentine bonding system (DBS) with an intrinsically antimicrobial polymerisable monomer is of significance especially if it can be used with self-etching primers enabling resistance to degradation of the interface.

METHODS

Experimental adhesives were developed incorporating eugenyl methacrylate (EgMA) at concentrations of 0,10 or 20 wt%, designated as EgMA0, EgMA10 and EgMA20, respectively, for use as a two-step self-etch DBS with the functional monomer bis[2-(methacryloyloxy) ethyl] phosphate (BMEP) in the primer. The curing, thermal and wettability properties of the adhesives were determined, and hybrid layer formation was characterised by confocal laser scanning microscopy, microtensile bond strengths (µTBS) and nanoleakage by back-scattered SEM. In situ zymography was used to assess MMP inhibitory activity of the BMEP-EgMA DBS.

RESULTS

EgMA in the adhesives lowered the polymerisation exotherm and resulted in higher Tg, without negatively affecting degree of conversion. Water sorption and solubility were significantly lower with higher concentrations of EgMA in the adhesive. The formation of a distinct hybrid layer was evident from confocal images with the different adhesives, whilst EgMA20 yielded the highest µTBS post water storage challenges and lowest nanoleakage after 6 months. The experimental DBS exhibited minimal to no MMP activity at 3 months.

SIGNIFICANCE

The hydrophobic nature of EgMA and high cross-link density exerts considerable benefits in lowering water uptake and polymerisation exotherm. The application of EgMA, adhesives in conjunction with BMEP in a multi-functional self-etching DBS can resist MMP activity, hence, enhance longevity of the dentine-resin composite interface.

Influence of Concentration Levels of β-Tricalcium Phosphate on the Physical Properties of a Dental Adhesive

Our study assessed the influence of integrating 5% and 10% tricalcium phosphate (β-TCP-Ca₃(PO₄)₂.) nanoparticles into a dental adhesive on the adhesive’s bonding. To evaluate the filler nanoparticles, scanning electron microscopy (SEM), Energy Dispersive X-Ray (EDX) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and micro-Raman spectroscopy techniques were used. Shear Bond strength (SBS) testing, degree of conversion (DC) analysis, investigation of the adhesive–dentin interface, and biofilm experiments were conducted. The SEM micrographs revealed non-uniform agglomerates, while the EDX demonstrated the existence of oxygen ‘O’ (24.2%), phosphorus ‘P’ (17.4%) and calcium ‘Ca’ (60.1%) in the β-TCP nanoparticles. The FTIR and micro-Raman spectra indicated characteristic bands for β-TCP containing materials. The 10 wt.% β-TCP adhesive presented the highest SBS values (NTC-10 wt.% β-TCP: 33.55 ± 3.73 MPa, TC-10 wt.% β-TCP: 30.50 ± 3.25 MPa), followed by the 5 wt.% β-TCP adhesive (NTC-5 wt.% β-TCP: 32.37 ± 3.10 MPa, TC-5 wt.% β-TCP: 27.75 ± 3.15 MPa). Most of the detected failures after bond strength testing were adhesive in nature. The β-TCP adhesives demonstrated suitable dentin interaction by forming a hybrid layer (with few or no gaps) and resin tags. The β-TCP adhesives (10 wt.%) revealed lower DC values compared to control. The incorporation of 5 and 10 wt.% concentrations of β-TCP particles resulted in an increase in SBS values. A linear decline in DC values was witnessed when the nanoparticle concentration was increased. Further research focusing on exploring the influence of higher filler concentrations on adhesive’s properties is recommended.

Novel low-shrinkage-stress bioactive nanocomposite with anti-biofilm and remineralization capabilities to inhibit caries

Background/purpose

A common reason for dental composite restoration failure is recurrent caries at the margins. Our objectives were to: (1) develop a novel low-shrinkage-stress, antibacterial and remineralizing resin composite; (2) evaluate the effects of dimethylaminohexadecyl methacrylate (DMAHDM) on mechanical properties, biofilm inhibition, calcium (Ca) and phosphate (P) ion release, degree of conversion, and shrinkage stress on the new low-shrinkage-stress resin composite for the first time.

Material and methods

The resin consisted of urethane dimethacrylate (UDMA) and triethylene glycol divinylbenzyl ether (TEG-DVBE) with high resistance to salivary hydrolytic degradation. Composites were made with 0%–8% of DMAHDM for antibacterial activity, and 20% of nanoparticles of amorphous calcium phosphate (NACP) for remineralization. Mechanical properties and Streptococcus mutans biofilm growth on composites were assessed. Ca and P ion releases, degree of conversion and shrinkage stress were evaluated.

Results

Adding 2–5% DMAHDM and 20% NACP into the low-shrinkage-stress composite did not compromise the mechanical properties (p > 0.05). The incorporation of DMAHDM greatly reduced S. mutans biofilm colony-forming units by 2–5 log and lactic acid production by 7 folds, compared to a commercial composite (p < 0.05). Adding 5% DMAHDM did not compromise the Ca and P ion release. The low-shrinkage-stress composite maintained a high degree of conversion of approximately 70%, while reducing the shrinkage stress by 37%, compared to a commercial control (p < 0.05).

Conclusion

The bioactive low-shrinkage-stress composite reduced the polymerization shrinkage stress, without compromising other properties. Increasing the DMAHDM content increased the antibacterial effect in a dose-dependent manner.

Novel Nano Calcium Fluoride Remineralizing and Antibacterial Dental Composites

OBJECTIVE

Composites with remineralizing and antibacterial properties are favorable for caries inhibition. The objectives of this study were to develop a new bioactive nanocomposite with remineralizing and antibiofilm properties by incorporating dimethylaminohexadecyl methacrylate (DMAHDM) and nano-calcium fluoride (nCaF₂).

METHODS

nCaF₂ was produced via a spray-drying method and integrated at 15% mass fraction into composite. DMAHDM was added at 3% mass fraction. Mechanical properties and F and Ca ion releases were assessed. Colony-forming units (CFU), lactic acid and metabolic activity of biofilms on composites were performed.

RESULTS

The new composites had flexural strengths of (95.28±6.32) MPa and (125.93±7.49) MPa, which were within the ISO recommendations. Biofilm CFU were reduced by 3-4 log (p<0.05). The composites achieved high F releases of (0.89±0.01) mmol/L and (0.44±0.01) mmol/L, and Ca releases of (1.46±0.05) mmol/L and (0.54±0.005) mmol/L.

CONCLUSIONS

New nanocomposites were developed with good mechanical properties, potent antibacterial activity against salivary biofilms, and high F and Ca ion releases with potential for remineralization.

CLINICAL SIGNIFICANCE

Novel nanocomposites using nCaF₂ and DMAHDM were developed with potent antibacterial and remineralizing effects and high F and Ca ion releases. They are promising to inhibit recurrent caries, promote remineralization, and possess long-term sustainability.

Molecular Interactions between Saliva and Dental Composites Resins: A Way Forward

Dentin and enamel loss related to trauma or especially caries is one of the most common pathological issues in dentistry that requires restoration of the teeth by using materials with appropriate properties. The composite resins represent dental materials with significant importance in today’s dentistry, presenting important qualities, including their mechanical behavior and excellent aesthetics. This paper focuses on the saliva interactions with these materials and on their biocompatibility, which is continuously improved in the new generations of resin-based composites. Starting from the elements involved on the molecular landscape of the dental caries process, the paper presents certain strategies for obtaining more advanced new dental composite resins, as follows: suppression of oral biofilm acids formation, promotion of remineralization process, counteraction of the proteolytic attack, and avoidance of cytotoxic effects; the relation between dental composite resins and salivary oxidative stress biomarkers is also presented in this context.

Microshear Bond Strength of Nanoparticle-Incorporated Conventional and Resin-Modified Glass Ionomer to Caries-Affected Dentin

The purpose of this study was to assess the influence of three different types of nanoparticles (silver (SNPs), titanium dioxide (TNPs), and zinc oxide (ZNPs)) on the microshear bond strength of conventional glass ionomer cement (CGIC) and resin-modified glass ionomer cement based on whether CGIC or RMGIC is used with four subgroups (based on the incorporation of SNPs, ZNPs, and TNPs in addition to a control subgroup) (n = 12) as follows: CGIC, CGIC + TNP, CGIC + ZNP, CGIC + SNP, RMGIC, RMGIC + TNP, RMGIC + ZNP, and RMGIC + SNP. After 24 hours, the μSBS of specimens was tested and the obtained data were analyzed using two-way ANOVA and Tukey's HSD test. The obtained results showed that the incorporation of TNPs in two glass ionomers was not statistically significant compared with the control subgroups (p > 0.05). In the first group, the highest and lowest mean μSBS were, respectively, observed in the CGIC + SNP subgroup and CGIC + ZNP subgroup. In the second group, RMGIC + ZNP and RMGIC + SNP, respectively, showed the highest and lowest mean μSBS compared to the other subgroups. According to the results, it can be concluded that TNPs can be incorporated into both CGIC and RMGIC without compromising the bond strength of glass ionomers. SNPs and ZNPs can be, respectively, added to CGICs and RMGICs to improve the bond strength of the restoration.

Long-term antibacterial activity and cytocompatibility of novel low-shrinkage-stress, remineralizing composites

A low-shrinkage-stress (LSS), antibacterial and remineralizing nanocomposite was recently developed; however, validation of its long-term antibacterial potency in modulating human salivary-derived biofilm is an unmet need. This study aimed to evaluate the antibacterial effect of the bioactive LSS composite before and after aging in acidic solution for 90 days using a multi-species biofilm model, and to evaluate its cytotoxicity. The LSS composite consisted of urethane dimethacrylate (UDMA) and triethylene glycol divinylbenzyl ether (TEG-DVBE), 3% dimethylaminohexadecyl methacrylate (DMAHDM) and 20% nanoparticles of amorphous calcium phosphate (NACP). Biofilm colony-forming units (CFU), lactic acid production, and confocal laser scanning microscopy (3D biofilm) were evaluated before and after three months of aging. Cytotoxicity was assessed against human gingival fibroblasts (HGF). The new LSS composite presented the lowest biofilm CFU, lactic acid and biofilm biomass, compared to controls (n = 6, p < 0.05). Importantly, the new composite exhibited no significant difference in antibacterial performance before and after 90-day-aging, demonstrating long-term antibacterial activity (p > 0.1). The LSS antibacterial and remineralizing composite presented a low cell viability at original extract that has increased with further dilutions. In conclusion, this study spotlighted that the new bioactive composite not only had a low shrinkage stress, but also down-regulated the growth of oral biofilms, reduced acid production, maintained antibacterial activity after the 90-day-aging, and did not compromise the cytocompatibility.

Bibliometric Analysis of Literature Published on Antibacterial Dental Adhesive from 1996-2020

This study aimed to investigate the current state of research on antibacterial dental adhesives. The interest in this field can be drawn from an increasing number of scholarly works in this area. However, there is still a lack of quantitative measurement of this topic. The main aim of this study was to consolidate the research published on the antibacterial adhesive from 1996 to 2020 in Web of Science indexed journals. The bibliometric method, a quantitative study of investigating publishing trends and patterns, was used for this study. The result has shown that a gradual increase in research was found, whereby a substantial increase was observed from 2013. A total of 248 documents were published in 84 journals with total citations of 5107. The highly cited articles were published mainly in Q1 category journals. Most of the published articles were from the USA, China, and other developed countries; however, some developing countries contributed as well. The authorship pattern showed an interdisciplinary and collaborative approach among researchers. The thematic evaluation of keywords along with a three-factor analysis showed that 'antibacterial adhesives' and 'quaternary ammonium' have been used commonly. This bibliometric analysis can provide direction not only to researchers but also to funding organizations and policymakers.

Application of Antimicrobial Polymers in the Development of Dental Resin Composite

Dental resin composites have been widely used in a variety of direct and indirect dental restorations due to their aesthetic properties compared to amalgams and similar metals. Despite the fact that dental resin composites can contribute similar mechanical properties, they are more likely to have microbial accumulations leading to secondary caries. Therefore, the effective and long-lasting antimicrobial properties of dental resin composites are of great significance to their clinical applications. The approaches of ascribing antimicrobial properties to the resin composites may be divided into two types: The filler-type and the resin-type. In this review, the resin-type approaches were highlighted. Focusing on the antimicrobial polymers used in dental resin composites, their chemical structures, mechanical properties, antimicrobial effectiveness, releasing profile, and biocompatibility were included, and challenges, as well as future perspectives, were also discussed.

Antimicrobial, biocompatibility, and physicochemical properties of novel adhesive methacrylate dental monomers

For the advancement of Class V restoratives, our goal was to evaluate the physicochemical and mechanical properties, antimicrobial functionality, and cytotoxic potential of novel antimicrobial copolymers. 5-Carboxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethylpentan-1-aminium bromide (AMadh1) and 10-carboxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethyldecan-1-aminium bromide (AMadh2) were incorporated into light-curable urethane dimethacrylate, polyethylene glycol–extended urethane dimethacrylate, ethyl 2-(hydroxymethyl) acrylate resin (UPE resin). In the AMadhs-UPE resin, the hydrophobic/hydrophilic balance, degree of vinyl conversion, flexural strength, elastic modulus, and shear bond strength were assessed. Antimicrobial properties were measured using Streptococcus mutans (planktonic and biofilm). Cytotoxicity was tested using human gingival fibroblasts and mouse connective tissue fibroblasts (ATCC® CCL-1™) exposed to two-fold serial dilutions (≤10.6 mmol/L AMadh1 or ≤8.8 mmol/L AMadh2). At 10% mass of AMadh, the attained degree of vinyl conversion values (AMadh1 = 90.1% and AMadh2 = 88.5%) were not statistically different from the UPE resin (88.1%). At both AMadh levels, the flexural strength was reduced in a dose-dependent manner. Elastic modulus and contact angle were not significantly affected by AMadh1. Variations in elastic modulus and contact angle were observed with AMadh2; however, this does not disqualify it in future design of Class V restoratives. Compared to UPE resin, AMadh1-UPE and AMadh2-UPE (10% mass) copolymers reduced S. mutans biofilm 4.2- and 1.6-fold, respectively (p ≤ 0.006). In direct contact with human gingival fibroblasts or ATCC CCL-1 cells, at biologically relevant concentrations, the AMadhs did not adversely affect cell viability or their metabolic activity. This effort addresses a significant oral health issue associated with elderly populations. Its successful completion is expected to yield dental restoratives with well-controlled biofunction.

Study on a novel antibacterial light-cured resin composite containing nano-MgO

A new type of photocurable resin composite containing nano-MgO was synthesized in order to reduce the occurrence of secondary caries. Different mass ratios (0 %, 1 %, 2 %, 4 %, 8 %) of nano-MgO were added into resin composites. The antibacterial properties of nano-MgO powder and modified resin composites against Streptococcus mutans (S. mutans) were detected by antibacterial ring test and film contact test, respectively. Compressive strength (CS) and wear resistance were determined by a universal testing machine and an abrasion test machine. The results indicated that antibacterial activity and wear resistance of resin composites containing nano-MgO were superior to the control group (p < 0.05). The antibacterial rate reached as high as 99.4 % when the mass ratio of nano-MgO was 8 %. However, the CS values tended to decline as the content of nano-MgO increase. Hence, the addition of nano-MgO showed excellent antibacterial property to resin composites and enhanced wear resistance, but was detrimental to their mechanical properties.

Physicochemical, Mechanical, and Antimicrobial Properties of Novel Dental Polymers Containing Quaternary Ammonium and Trimethoxysilyl Functionalities

The aims of this study were to evaluate the physicochemical and mechanical properties, antimicrobial (AM) functionality, and cytotoxic potential of novel dental polymers containing quaternary ammonium and trimethoxysilyl functionalities (e.g., N-(2-(methacryloyloxy)ethyl)-N,N-dimethyl-3-(trimethoxysilyl)propan-1-aminium iodide (AMsil1) and N-(2-(methacryloyloxy)ethyl)-N,N-dimethyl-11-(trimethoxysilyl)undecan-1-aminium bromide (AMsil2)). AMsil1 or AMsil2 were incorporated into light-cured (camphorquinone + ethyl-4-N,N-dimethylamino benzoate) urethane dimethacrylate (UDMA)/polyethylene glycol-extended UDMA/ethyl 2-(hydroxymethyl)acrylate (EHMA) resins (hereafter, UPE resin) at 10 or 20 mass %. Cytotoxic potential was assessed by measuring viability and metabolic activity of immortalized mouse connective tissue and human gingival fibroblasts in direct contact with monomers. AMsil-UPE resins were evaluated for wettability by contact angle measurements and degree of vinyl conversion (DVC) by near infra-red spectroscopy analyses. Mechanical property evaluations entailed flexural strength (FS) and elastic modulus (E) testing of copolymer specimens. The AM properties were assessed using Streptococcus mutans (planktonic and biofilm forms) and Porphyromonas gingivalis biofilm. Neither AMsil exhibited significant toxicity in direct contact with cells at biologically relevant concentrations. Addition of AMsils made the UPE resin more hydrophilic. DVC values for the AMsil-UPE copolymers were 2%-31% lower than that attained in the UPE resin control. The mechanical properties (FS and E) of AMsil-UPE specimens were reduced (11%-57%) compared to the control. Compared to UPE resin, AMsil1-UPE and AMsil2-UPE (10% mass) copolymers reduced S. mutans biofilm 4.7- and 1.7-fold, respectively (p ≤ 0.005). Although not statistically different, P. gingivalis biofilm biomass on AMsil1-UPE and AM AMsil2-UPE copolymer disks were lower (71% and 85%, respectively) than that observed with a commercial AM dental material. In conclusion, the AM function of new monomers is not inundated by their toxicity towards cells. Despite the reduction in mechanical properties of the AMsil-UPE copolymers, AMsil2 is a good candidate for incorporation into multifunctional composites due to the favorable overall hydrophilicity of the resins and the satisfactory DVC values attained upon light polymerization of AMsil-containing UDMA/PEG-U/EHMA copolymers.

Threats to adhesive/dentin interfacial integrity and next generation bio-enabled multifunctional adhesives

Nearly 100 million of the 170 million composite and amalgam restorations placed annually in the United States are replacements for failed restorations. The primary reason both composite and amalgam restorations fail is recurrent decay, for which composite restorations experience a 2.0-3.5-fold increase compared to amalgam. Recurrent decay is a pernicious problem-the standard treatment is replacement of defective composites with larger restorations that will also fail, initiating a cycle of ever-larger restorations that can lead to root canals, and eventually, to tooth loss. Unlike amalgam, composite lacks the inherent capability to seal discrepancies at the restorative material/tooth interface. The low-viscosity adhesive that bonds the composite to the tooth is intended to seal the interface, but the adhesive degrades, which can breach the composite/tooth margin. Bacteria and bacterial by-products such as acids and enzymes infiltrate the marginal gaps and the composite's inability to increase the interfacial pH facilitates cariogenic and aciduric bacterial outgrowth. Together, these characteristics encourage recurrent decay, pulpal damage, and composite failure. This review article examines key biological and physicochemical interactions involved in the failure of composite restorations and discusses innovative strategies to mitigate the negative effects of pathogens at the adhesive/dentin interface. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2466-2475, 2019.

Advancing antimicrobial strategies for managing oral biofilm infections

Effective control of oral biofilm infectious diseases represents a major global challenge. Microorganisms in biofilms exhibit increased drug tolerance compared with planktonic cells. The present review covers innovative antimicrobial strategies for controlling oral biofilm-related infections published predominantly over the past 5 years. Antimicrobial dental materials based on antimicrobial agent release, contact-killing and multi-functional strategies have been designed and synthesized for the prevention of initial bacterial attachment and subsequent biofilm formation on the tooth and material surface. Among the therapeutic approaches for managing biofilms in clinical practice, antimicrobial photodynamic therapy has emerged as an alternative to antimicrobial regimes and mechanical removal of biofilms, and cold atmospheric plasma shows significant advantages over conventional antimicrobial approaches. Nevertheless, more preclinical studies and appropriately designed and well-structured multi-center clinical trials are critically needed to obtain reliable comparative data. The acquired information will be helpful in identifying the most effective antibacterial solutions and the most optimal circumstances to utilize these strategies.

Immobilization of quaternary ammonium based antibacterial monomer onto dentin substrate by non-thermal atmospheric plasma

Use of non-thermal atmospheric plasma (NTAP) brush on immobilization of dimethylaminohexadecyl methacrylate (DMAHDM) onto dentin bonding substrate, and resulting antibacterial activity against Streptococcus mutans were investigated. A bonding substrate with several-micron-demineralized layer was created from human dentin. DMAHDM was applied onto the demineralized layer with or without plasma exposure. Scanning electron microscopy (SEM) and Fourier transformed infrared (FTIR) spectroscopy were employed to verify immobilization/grafting of DMAHDM onto the substrate. Antibacterial activity of the resulting substrate was assessed by using colony-forming unit (CFU) and confocal scanning laser microscopy. Effects of saliva pellicle treatment and aging process on the above substrate were also evaluated. The SEM/FTIR results demonstrated that NTAP could induce DMAHDM immobilization onto dentin substrate, which was further verified via quantitative FTIR analysis. Comparing with non-plasma-treated, the plasmatreated substrate, with CFU 4 log lower, exhibited much stronger inhibitory effects, which were minimally affected by saliva or aging. The DMAHDM-immobilized dentin substrate showed effective and sustained antibacterial characteristics.

A novel antibacterial resin-based root canal sealer modified by Dimethylaminododecyl Methacrylate

Persistent apical periodontitis, mainly caused by microorganisms infections, represents a critical challenge for endodontists. Dimethylaminododecyl methacrylate (DMADDM) is a well-studied and potent antibacterial agent used in various studies described in the literature. The aim of this study is to develop a novel antibacterial root canal sealer by incorporating DMADDM into EndoREZ and investigate the properties of the resulting material. Different mass fractions (0, 1.25%, 2.5%, and 5%) of DMADDM were incorporated into EndoREZ and the cytotoxicity, apical sealing ability and solubility of the resulting material were evaluated. Furthermore, a direct contact test, determination of colony-forming units, a crystal violet assay, scanning electronic microscopy and live/dead bacteria staining were performed to evaluate the antibacterial effect of the sealer to multispecies bacteria (Enterococcus faecalis, Streptococcus gordonii, Actinomyces naeslundii, and Lactobacillus acidophilus), in planktonic cells or biofilms. Fluorescence in situ hybridization and quantitative real-time polymerase chain reaction were carried out to assess the composition of the multispecies biofilms. No difference on the cytotoxicity, apical sealing ability and solubility between sealers containing DMADDM (1.25%, 2.5%) and EndoREZ (0%) could be determined. However, when the mass fraction of DMADDM increased to 5%, significantly different properties were found compared to the 0% (p < 0.05) group. Moreover, incorporating DMADDM into the sealer could greatly improve the antibacterial properties of EndoREZ. In addition, the composition ratio of E. faecalis could be decreased in multispecies microecology in sealers containing DMADDM. Therefore, a EndoREZ sealer material containing DMADDM could be considered useful in clinical applications for preventing and treating persistent apical periodontitis.

Novel Protein-Repellent and Antibacterial Resins and Cements to Inhibit Lesions and Protect Teeth

Orthodontic treatment is increasingly popular as people worldwide seek esthetics and better quality of life. In orthodontic treatment, complex appliances and retainers are placed in the patients’ mouths for at least one year, which often lead to biofilm plaque accumulation. This in turn increases the caries-inducing bacteria, decreases the pH of the retained plaque on an enamel surface, and causes white spot lesions (WSLs) in enamel. This article reviews the cutting-edge research on a new class of bioactive and therapeutic dental resins, cements, and adhesives that can inhibit biofilms and protect tooth structures. The novel approaches include the use of protein-repellent and anticaries polymeric dental cements containing 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminododecyl methacrylate (DMAHDM); multifunctional resins that can inhibit enamel demineralization; protein-repellent and self-etching adhesives to greatly reduce oral biofilm growth; and novel polymethyl methacrylate resins to suppress oral biofilms and acid production. These new materials could reduce biofilm attachment, raise local biofilm pH, and facilitate the remineralization to protect the teeth. This novel class of dental resin with dual benefits of antibacterial and protein-repellent capabilities has the potential for a wide range of dental and biomedical applications to inhibit bacterial infection and protect the tissues.

Fabrication of nano CuAl2O4 spinel for copper stabilization and antibacterial application

With widely reported antibacterial potential, the copper-containing nanoparticles have become attractive antibacterial agents to prohibit the undesirable bacterial adhesion and growth. However, after applying the copper-containing agents in the environment, the potential leaching and bioaccumulation of copper ions may cause severe environmental contamination and irreversible health problems. Therefore, the nano CuAl₂O₄ spinel was fabricated as a novel copper-stabilized antibacterial agent with much minimized copper leachability. Results show the successful fabrication of nano CuAl₂O₄ spinel as well-shaped polyhedral particles with maximum length of ˜100 nm and width of ˜50 nm. The optimal parameters for the synthesis of CuAl₂O₄ include pH value of 11.0, sintering temperature of 1000 °C, dwelling time of 3 h, and the heating rate of 5 °C/min. The leaching test also confirmed the superiority of the nano CuAl₂O₄ in copper stabilization. The beneficial antibacterial activity of the nano CuAl₂O₄ was further testified by an obvious decrease in the amount of Escherichia coli in a medium with addition of the CuAl₂O₄ spinel. Besides the growth mechanisms of the nano-particles, this work has also innovatively demonstrated a strategy to replace the traditional antibacterial agents by a novel, long-lasting nano CuAl₂O₄ with little copper leachability.

An improved dental composite with potent antibacterial function

A new BisGMA-based antibacterial dental composite has been formulated and evaluated. Compressive strength and bacterial viability were utilized to evaluate the formed composites. It was found that the new composite exhibited a significantly enhanced antibacterial function along with improved mechanical and physical properties. The bromine-containing derivative-modified composite was more potent in antibacterial activity than the chlorine-containing composite. The modified composites also exhibited an increase of 30–53% in compressive yield strength, 15–30% in compressive modulus, 15–33% in diametral tensile strength and 6–20% in flexural strength, and a decrease of 57–76% in bacterial viability, 23–37% in water sorption, 8–15% in shrinkage, 8–13% in compressive strength, and similar degree of conversion, than unmodified composite. It appears that this experimental composite may possibly be introduced to dental clinics as an attractive dental restorative due to its improved properties as well as enhanced antibacterial function.

Modifying Adhesive Materials to Improve the Longevity of Resinous Restorations

Dental caries is a common disease on a global scale. Resin composites are the most popular materials to restore caries by bonding to tooth tissues via adhesives. However, multiple factors, such as microleakage and recurrent caries, impair the durability of resinous restorations. Various innovative methods have been applied to develop adhesives with particular functions to tackle these problems, such as incorporating matrix metalloproteinase inhibitors, antibacterial or remineralizing agents into bonding systems, as well as improving the mechanical/chemical properties of adhesives, even combining these methods. This review will sum up the latest achievements in this field.

Flow Cytometry Analysis of Antibacterial Effects of Universal Dentin Bonding Agents on Streptococcus mutans

There is no consensus on the antibacterial activity of dentin bonding systems (DBS). Many study models have been used to evaluate the antimicrobial activity of dental materials. In this study, a novel detection method, flow cytometry, was introduced. It allows for evaluation of the antibacterial activity of DBS, based on assessment of the disruption of the bacterial physical membrane induced by DBS. The aim of the study was to evaluate the antibacterial properties of selected dentin bonding systems against Streptococcus mutans. The highest antibacterial activity against S. mutans was observed for Adhese Universal (99.68% dead cells) and was comparable to that of Prime&Bond Universal, OptiBond Universal, or Clearfil Universal Bond Quick (p > 0.05). The lowest activity of all tested systems was displayed by the multi-mode adhesive, Universal Bond (12.68% dead bacteria cells), followed by the self-etch adhesive, OptiBond FL (15.58% dead bacteria cells). The present study showed that in the case of two-component DBS, the primer exhibited higher antimicrobial activity than the adhesive (or bond) itself.

Evaluation of biofilm formation on novel copper-catalyzed azide-alkyne cycloaddition (CuAAC)-based resins for dental restoratives

OBJECTIVE

For the past several decades, the resins used in dental restorations have been plagued with numerous problems, including their implication in biofilm formation and secondary caries. The need for alternative resins is critical, and evaluation of biofilm formation on these resins is essential. The aim of this study was to evaluate in vitro biofilm formation on the surface of novel copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC)-based resins and composites.

METHODS

CuAAC-based resins/composites made from varying azide monomers and different copper concentrations were compared with BisGMA-TEGDMA resins/composites that served as the control. Biofilms were formed using a mono-species model containing a luciferase-expressing strain of Streptococcus mutans. Luciferase activity was measured and the number of viable bacteria was enumerated on biofilms associated with each resin and composite.

RESULTS

A significant reduction (p<0.05) in luciferase activity, and the number of viable bacteria recovered from biofilms on CuAAC-based resins and composites was observed in comparison to biofilms associated with the BisGMA-TEGDMA controls.

SIGNIFICANCE

CuAAC-based resins do still allow for the formation of biofilms; however, the statistically significant reduction of growth that was associated with the CuAAC resin may enhance the longevity of restorations that incorporate CuAAC-based materials.

Novel dental composite with capability to suppress cariogenic species and promote non-cariogenic species in oral biofilms

Recurrent caries often occurs and is a primary reason for the failure of dental composite restorations. The objectives of this study were to: (1) develop a bioactive composite containing dimethylaminohexadecyl methacrylate (DMAHDM), (2) investigate its antibacterial effects and suppression on biofilm growth, and (3) investigate its ability to modulate biofilm species composition for the first time. DMAHDM was incorporated into a composite at mass% of 0%, 0.75%, 1.5%, 2.25% and 3%. A commercial composite Heliomolar served as a comparative control. A biofilm model consisting of Streptococcus mutans (S. mutans), Streptococcus sanguinis (S. sanguinis) and Streptococcus gordonii (S. gordonii) was tested by growing biofilms for 48 h and 72 h on composites. Colony-forming units (CFUs), metabolic activity and live/dead staining were evaluated. Lactic acid and polysaccharide productions were measured to assess biofilm cariogenicity. TaqMan real-time polymerase chain reaction was used to determine the proportion of each species in the biofilm. DMAHDM-containing composite had a strong anti-biofilm function, reducing biofilm CFU by 2-3 orders of magnitude, compared to control composite. Biofilm metabolic activity, lactic acid and polysaccharides were decreased substantially, compared to control (p < 0.05). At 72 h, the cariogenic S. mutans proportion in the biofilm on the composite with 3% DMAHDM was 19.9%. In contrast, an overwhelming S. mutans proportion of 92.2% and 91.2% existed in biofilms on commercial control and 0% DMAHDM, respectively. In conclusion, incorporating DMAHDM into dental composite: (1) yielded potent anti-biofilm properties; (2) modulated the biofilm species composition toward a non-cariogenic tendency. The new DMAHDM composite is promising for applications in a wide range of tooth cavity restorations to modulate oral biofilm species and combat caries.

An antibacterial and biocompatible piperazine polymer

Bacterial repellence by biomedical materials is a desirable property that can potentially improve the healing process. In this study, we described a simple and green method to prepare a novel piperazine polymer (PE), which was based on the raw materials piperazine (PA) and ethylenediaminetetraacetic dianhydride (EDTAD). The structure and thermal stability of the obtained material were characterized using Fourier transform infrared spectrometry (FTIR), nuclear magnetic resonance spectroscopy (NMR), elementary analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). To evaluate the antibacterial properties of PE, a strain of Gram-negative Escherichia coli (E. coli) bacteria and a strain of Gram-positive Staphylococcus aureus (S. aureus) bacteria were used. The results indicated that PE exhibited good antibacterial activity against both strains of bacteria in a short time frame. The initial cytotoxicity test of the obtained material was based on the changes in the morphology and proliferation of osteoblasts, and the results demonstrated that the cytotoxicity of PE was concentration-dependent. Combining the experimental results of these two parts, it was shown that bacteria could be inhibited by a certain concentration of PE, while its toxicity toward osteoblasts was very low. In summary, these results revealed the potential usefulness of PE in biomedical applications.

A novel piperazine polymer (PE), which was prepared through a simple and green method, exhibited good antibacterial activity against E. coli and S. aureus.

Novel Approaches to the Control of Oral Microbial Biofilms

Effective management of biofilm-related oral infectious diseases is a global challenge. Oral biofilm presents increased resistance to antimicrobial agents and elevated virulence compared with planktonic bacteria. Antimicrobial agents, such as chlorhexidine, have proven effective in the disruption/inhibition of oral biofilm. However, the challenge of precisely and continuously eliminating the specific pathogens without disturbing the microbial ecology still exists, which is a major factor in determining the virulence of a multispecies microbial consortium and the consequent development of oral infectious diseases. Therefore, several novel approaches are being developed to inhibit biofilm virulence without necessarily inducing microbial dysbiosis of the oral cavity. Nanoparticles, such as pH-responsive enzyme-mimic nanoparticles, have been developed to specifically target the acidic niches within the oral biofilm where tooth demineralization readily occurs, in effect controlling dental caries. Quaternary ammonium salts (QAS) such as dimethylaminododecyl methacrylate (DMADDM), when incorporated into dental adhesives or resin composite, have also shown excellent and durable antimicrobial activity and thus could effectively inhibit the occurrence of secondary caries. In addition, custom-designed small molecules, natural products and their derivatives, as well as basic amino acids such as arginine, have demonstrated ecological effects by modulating the virulence of the oral biofilm without universally killing the commensal bacteria, indicating a promising approach to the management of oral infectious diseases such as dental caries and periodontal diseases. This article aims to introduce these novel approaches that have shown potential in the control of oral biofilm. These methods may be utilized in the near future to effectively promote the clinical management of oral infectious diseases and thus benefit oral health.

Novel multifunctional nanocomposite for root caries restorations to inhibit periodontitis-related pathogens

OBJECTIVES

The objectives of this study were to: (1) develop a novel multifunctional composite with nanoparticles of silver (NAg), 2-methacryloyloxyethyl phosphorylcholine (MPC), dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP); and (2) investigate biofilm-inhibition via the multifunctional nanocomposite against three species of periodontal pathogens for the first time.

METHODS

The multifunctional nanocomposite was fabricated by incorporating NAg, MPC, DMAHDM and NACP into the resin consisting of pyromellitic glycerol dimethacrylate (PMDGDM) and ethoxylated bisphenol A dimethacrylate (EBPADMA). Three species (Porphyromonas gingivalis, Aggregatibacter actinomycetemcomitans and Fusobacterium nucleatum) were tested for metabolic activity (MTT), live/dead staining, polysaccharide production and colony-forming units (CFU) of biofilms grown on resins.

RESULTS

Incorporation of 0.08% to 0.12% NAg, 3% MPC, 3% DMAHDM and 30% NACP did not compromise the mechanical properties of the composite (p > 0.1). The multifunctional nanocomposite reduced protein adsorption to nearly 1/10 of that of a commercial control (p < 0.05). For all three species, the biofilm CFU was reduced by about 5 and 1 orders of magnitude via the nanocomposite containing NAg + MPC + DMAHDM, compared to commercial control and the composite with MPC + DMAHDM, respectively.

CONCLUSIONS

The novel multifunctional nanocomposite achieved the greatest reduction in metabolic activity, polysaccharide and biofilm growth of three periodontal pathogens.

CLINICAL SIGNIFICANCE

The strongly-antibacterial, multifunctional composite is promising for treating root lesions, alleviating periodontitis and protecting the periodontal tissues.

Advanced smart biomaterials and constructs for hard tissue engineering and regeneration

Hard tissue repair and regeneration cost hundreds of billions of dollars annually worldwide, and the need has substantially increased as the population has aged. Hard tissues include bone and tooth structures that contain calcium phosphate minerals. Smart biomaterial-based tissue engineering and regenerative medicine methods have the exciting potential to meet this urgent need. Smart biomaterials and constructs refer to biomaterials and constructs that possess instructive/inductive or triggering/stimulating effects on cells and tissues by engineering the material's responsiveness to internal or external stimuli or have intelligently tailored properties and functions that can promote tissue repair and regeneration. The smart material-based approaches include smart scaffolds and stem cell constructs for bone tissue engineering; smart drug delivery systems to enhance bone regeneration; smart dental resins that respond to pH to protect tooth structures; smart pH-sensitive dental materials to selectively inhibit acid-producing bacteria; smart polymers to modulate biofilm species away from a pathogenic composition and shift towards a healthy composition; and smart materials to suppress biofilms and avoid drug resistance. These smart biomaterials can not only deliver and guide stem cells to improve tissue regeneration and deliver drugs and bioactive agents with spatially and temporarily controlled releases but can also modulate/suppress biofilms and combat infections in wound sites. The new generation of smart biomaterials provides exciting potential and is a promising opportunity to substantially enhance hard tissue engineering and regenerative medicine efficacy.

Protein-repellent nanocomposite with rechargeable calcium and phosphate for long-term ion release

OBJECTIVE

There has been no report on the effect of incorporating protein repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) into a composite containing nanoparticles of amorphous calcium phosphate (NACP) on calcium (Ca) and phosphate (P) ion rechargeability. The objectives of this study were to develop a Ca and P ion-rechargeable and protein-repellent composite for the first time, and investigate the effects of MPC and NACP on mechanical properties, protein-repellency, anti-biofilm effects, and Ca and P ion recharge and re-release.

METHODS

NACP were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Three NACP composites were made with 0 (control), 1.5%, and 3% of MPC. NACP (20%) and glass particles (50%) were also added into the resin. Protein adsorption was measured using a micro-bicinchoninic acid (BCA) method. A human saliva microcosm biofilm model was used to determine biofilm metabolic activity, lactic acid, and colony-forming units (CFU). Ca and P ion recharge and re-release were measured using a spectrophotometric method.

RESULTS

Flexural strengths and moduli of CaP-rechargeable composites matched those of a commercial composite without CaP rechargeability (p>0.1). Adding 1.5% and 3% MPC reduced protein adsorption to 1/3 and 1/5, respectively, that of commercial composite (p<0.05). Adding 3% MPC suppressed biofilm metabolic activity and lactic acid production, and reduced biofilm CFU by nearly 2 logs. All three NACP composites had excellent ion rechargeability and higher levels of ion re-releases. One recharge yielded continuous ion release for 21 days. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release. Incorporation of MPC did not compromise the CaP ion rechargeability.

SIGNIFICANCE

Incorporating 3% MPC into NACP nanocomposite greatly reduced protein adsorption, biofilm growth and lactic acid, decreasing biofilm CFU by nearly 2 logs, without compromising Ca and P recharge. This protein-repellent NACP-MPC rechargeable composite with long-term remineralization is promising for tooth restorations to inhibit secondary caries.

Developing a New Generation of Therapeutic Dental Polymers to Inhibit Oral Biofilms and Protect Teeth

Polymeric tooth-colored restorations are increasingly popular in dentistry. However, restoration failures remain a major challenge, and more than 50% of all operative work was devoted to removing and replacing the failed restorations. This is a heavy burden, with the expense for restoring dental cavities in the U.S. exceeding $46 billion annually. In addition, the need is increasing dramatically as the population ages with increasing tooth retention in seniors. Traditional materials for cavity restorations are usually bioinert and replace the decayed tooth volumes. This article reviews cutting-edge research on the synthesis and evaluation of a new generation of bioactive dental polymers that not only restore the decayed tooth structures, but also have therapeutic functions. These materials include polymeric composites and bonding agents for tooth cavity restorations that inhibit saliva-based microcosm biofilms, bioactive resins for tooth root caries treatments, polymers that can suppress periodontal pathogens, and root canal sealers that can kill endodontic biofilms. These novel compositions substantially inhibit biofilm growth, greatly reduce acid production and polysaccharide synthesis of biofilms, and reduce biofilm colony-forming units by three to four orders of magnitude. This new class of bioactive and therapeutic polymeric materials is promising to inhibit tooth decay, suppress recurrent caries, control oral biofilms and acid production, protect the periodontium, and heal endodontic infections.

Bioactive Dental Composites and Bonding Agents Having Remineralizing and Antibacterial Characteristics

Current dental restorative materials are typically inert and replace missing tooth structures. This article reviews efforts in the development of a new generation of bioactive materials designed to not only replace the missing tooth volume but also possess therapeutic functions. Composites and bonding agents with remineralizing and antibacterial characteristics have shown promise in replacing lost minerals, inhibiting recurrent caries, neutralizing acids, repelling proteins, and suppressing biofilms and acid production. Furthermore, they have demonstrated a low cytotoxicity similar to current resins, with additional benefits to protect the dental pulp and promote tertiary dentin formation. This new class of bioactive materials shows promise in reversing lesions and inhibiting caries.

Effects of water-aging for 6 months on the durability of a novel antimicrobial and protein-repellent dental bonding agent

Biofilms at the tooth-restoration bonded interface can produce acids and cause recurrent caries. Recurrent caries is a primary reason for restoration failures. The objectives of this study were to synthesize a novel bioactive dental bonding agent containing dimethylaminohexadecyl methacrylate (DMAHDM) and 2-methacryloyloxyethyl phosphorylcholine (MPC) to inhibit biofilm formation at the tooth-restoration margin and to investigate the effects of water-aging for 6 months on the dentin bond strength and protein-repellent and antibacterial durability. A protein-repellent agent (MPC) and antibacterial agent (DMAHDM) were added to a Scotchbond multi-purpose (SBMP) primer and adhesive. Specimens were stored in water at 37 °C for 1, 30, 90, or 180 days (d). At the end of each time period, the dentin bond strength and protein-repellent and antibacterial properties were evaluated. Protein attachment onto resin specimens was measured by the micro-bicinchoninic acid approach. A dental plaque microcosm biofilm model was used to test the biofilm response. The SBMP + MPC + DMAHDM group showed no decline in dentin bond strength after water-aging for 6 months, which was significantly higher than that of the control (P < 0.05). The SBMP + MPC + DMAHDM group had protein adhesion that was only 1/20 of that of the SBMP control (P < 0.05). Incorporation of MPC and DMAHDM into SBMP provided a synergistic effect on biofilm reduction. The antibacterial effect and resistance to protein adsorption exhibited no decrease from 1 to 180 d (P > 0.1). In conclusion, a bonding agent with MPC and DMAHDM achieved a durable dentin bond strength and long-term resistance to proteins and oral bacteria. The novel dental bonding agent is promising for applications in preventive and restorative dentistry to reduce biofilm formation at the tooth-restoration margin.

Microtensile bond strength of resin cement primer containing nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) to human dentin

PURPOSE

The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP.

MATERIALS AND METHODS

Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer's instructions. After storage in distilled water at 37℃ for 24 h, the bonded samples were sectioned longitudinally to produce 1.0 × 1.0 mm beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's post-hoc tests and the level of significance was set at 0.05.

RESULTS

The lowest mean microtensile bond strength was obtained for the NACP group. Tukey's test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67).

CONCLUSION

Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.

Nanostructured Polymeric Materials with Protein-Repellent and Anti-Caries Properties for Dental Applications

Dental caries is prevalent worldwide. Tooth cavity restorations cost more than $46 billion annually in the United States alone. The current generation of esthetic polymeric restorations have unsatisfactory failure rates. Replacing the failed restorations accounts for 50–70% of all the restorations. This article reviewed developments in producing a new generation of bioactive and therapeutic restorations. This includes: Protein-repellent and anti-caries polymeric dental composites, especially the use of 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminododecyl methacrylate (DMAHDM); protein-repellent adhesives to greatly reduce biofilm acids; bioactive cements to inhibit tooth lesions; combining protein-repellency with antibacterial nanoparticles of silver; tooth surface coatings containing calcium phosphate nanoparticles for remineralization; therapeutic restorations to suppress periodontal pathogens; and long-term durability of bioactive and therapeutic dental polymers. MPC was chosen due to its strong ability to repel proteins. DMAHDM was selected because it had the most potent antibacterial activity when compared to a series of antibacterial monomers. The new generation of materials possessed potent antibacterial functions against cariogenic and periodontal pathogens, and reduced biofilm colony-forming units by up to 4 logs, provided calcium phosphate ions for remineralization and strengthening of tooth structures, and raised biofilm pH from a cariogenic pH 4.5 to a safe pH 6.5. The new materials achieved a long-term durability that was significantly beyond current commercial control materials. This new generation of bioactive and nanostructured polymers is promising for wide applications to provide therapeutic healing effects and greater longevity for dental restorations.

Antibacterial quaternary ammonium compounds in dental materials: A systematic review

OBJECTIVE

Quaternary ammonium compounds (QACs) represent one of the most effective classes of disinfectant agents in dental materials and resin nanocomposites. This reviews aims to give a wide overview on the research in the field of antibacterial QACs in dental materials and nanocomposites.

METHOD

An introduction to dental materials components as well as the microorganisms and methods of evaluation for the antimicrobial assays are presented. Then, the properties and synthesis route of QACs, as monomer and filler, are shown. Finally, antimicrobial monomers and fillers, specifically those contain quaternary ammonium salts (QASs), in dental materials are reviewed.

RESULTS

QACs have been used as monomer and micro/nanofiller in restorative dentistry. They possess one or more methacrylate functional groups to participate in polymerization reactions. QACs with multiple methacrylate groups can also be used as crosslinking agents. Furthermore, QACs with chain length from ∼12 to 16 have higher antimicrobial activity in cured dental resins. In general, increasing the chain length leads to a threshold value (critical point) and then it causes decrease in the antimicrobial activity.

SIGNIFICANCE

The current state of the art of dental materials and resin nanocomposites includes a wide variety of antimicrobial materials. Among them, QACs presents low cytotoxicity and excellent long-term antimicrobial activity without leaching out over time.

Novel rechargeable calcium phosphate nanocomposite with antibacterial activity to suppress biofilm acids and dental caries

OBJECTIVE

Rechargeable calcium phosphate (CaP) composites were developed recently. However, none of the rechargeable CaP composites was antibacterial. The objectives of this study were to develop the first rechargeable CaP composite that was antibacterial, and to investigate the effects of adding dimethylaminohexadecyl methacrylate (DMAHDM) into rechargeable CaP composite on ion rechargeability and re-release as well as biofilm properties.

METHODS

DMAHDM was synthesized via a Menschutkin reaction. Nanoparticles of amorphous calcium phosphate (NACP) were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Two composites were fabricated: rechargeable NACP composite, and rechargeable NACP-DMAHDM composite. Mechanical properties and ion release and recharge were measured. A dental plaque microcosm biofilm model using saliva was tested.

RESULTS

Flexural strength and elastic modulus of rechargeable NACP and NACP-DMAHDM composites matched commercial control composite (p > 0.1). NACP-DMAHDM inhibited biofilm metabolic activity and lactic acid, and reduced biofilm colony-forming units (CFU) by 3-4 log. NACP and NACP-DMAHDM showed similar Ca and P ion recharge and re-release (p > 0.1). Therefore, adding DMAHDM did not compromise the ion rechargeability. One recharge yielded continuous release for 42 d. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release and remineralization capability.

CONCLUSIONS

The first CaP rechargeable and antibacterial composite was developed. Adding DMAHDM into the rechargeable NACP composite did not adversely affect the Ca and P ion release and recharge, and the composite had much less biofilm growth and lactic acid production, with CFU reduction by 3-4 log.

CLINICAL SIGNIFICANCE

This novel CaP rechargeable composite with long-term remineralization and antibacterial properties is promising for tooth restorations to inhibit caries.

[Antibacterial dental adhesive containing nanoantibacterial inorganic fillers]

OBJECTIVE

This investigation aimed to develop a novel antibacterial dental adhesive containing nanoantibacterial inorganic fillers and measure the dentin bonding strength, mechanical properties, and antibacterial property of the novel adhesive in vitro.

METHODS

Novel nanoantibacterial inorganic fillers containing quaternary ammonium salt with long chain alkyl were synthesized on the basis of previous research. These novel nanoantibacterial inorganic fillers were added into the dental adhesive to prepare novel nanoantibacterial dental resin composite at mass fractions of 0%, 2.5%, 5.0%, 7.5%, and 10%; 0% was used as control. Dentin shear bonding test was used to evaluate the bonding strength. Flexural test was utilized to measure the novel resin composite flexural strength and elastic modulus. A dental plaque microcosm biofilm model with human saliva as inoculum was formed. Colony forming unit, lactic acid production, and live/dead assay of the biofilm on novel dental adhesive were calculated to assess the effect of novel dental adhesive on human dental plaque microcosm biofilm.

RESULTS

The dentin shear bond strength, flexural strength, and elastic modulus were 28.9 MPa, 86.6 MPa, and 4.2 GPa, respectively, when the nanoantibacterial inorganic filler mass fraction in the dental adhesive reached approximately 5.0%. Consequently, the dentin shear bond strength and mechanical properties significantly increased. Addition of 2.5% nanoantibacterial inorganic fillers into the dental adhesive exerted no adverse effect on the mechanical properties significantly (P>0.05). Dental adhesive containing 5% or more nanoantibacterial inorganic fillers inhibited the metabolic activity of the dental plaque microcosm biofilm significantly, thereby displaying a strong antibacterial potency (P<0.05).

CONCLUSIONS

This novel antibacterial dental adhesive, which contained 5.0% nanoantibacterial inorganic filler, exhibited promising bonding strength, mechanical property, and antibacterial ability. Hence, this adhesive can be potentially used in caries inhibition in dental application.