Oral microbial biofilm models and their application to the testing of anticariogenic agents

Construction of a versatile in vitro cultivation screening platform using human oral microbiota

We developed a simulation model of human oral microbiota using Bio Palette oral medium (BPOM) containing 0.02% glucose and lower bacterial nitrogen sources, derived from saliva and dental plaque. By decreasing the concentration of Gifu anaerobic medium (GAM) from 30 to 10 g L-1 , we observed increased ratios of target pathogenic genera, Porphyromonas and Fusobacterium from 0.5% and 1.7% to 1.2% and 3.5%, respectively, in the biofilm on hydroxyapatite (HA) discs. BPOM exhibited the higher ratios of Porphyromonas and Fusobacterium, and amplicon sequence variant number on HA, compared with GAM, modified GAM and basal medium mucin. Mixing glycerol stocks of BPOM culture solutions from four human subjects resulted in comparable ratios of these bacteria to the original saliva. In this simulation model, sitafloxacin showed higher inhibitory effects on P. gingivalis than minocycline hydrochloride at a low dosage of 0.1 μg mL-1 . Probiotics such as Streptococcus salivarius and Limosilactobacillus fermentum also showed significant decreases in Porphyromonas and Fusobacterium ratios on HA, respectively. Overall, the study suggests that BPOM with low carbon and nutrients could be a versatile platform for assessing the efficacy of antibiotics and live biotherapeutics in treating oral diseases caused by Porphyromonas and Fusobacterium.

The inhibitory effect of ovomucoid from egg white on biofilm formation by Streptococcus mutans

BACKGROUND

Streptococcus mutans, the main pathogen associated with tooth decay, forms cariogenic biofilms on tooth surfaces. Therefore, controlling oral biofilm helps prevent dental caries. Hen's egg is a nutrient-dense food, and egg white is a good source of protein. Ovomucoid is one of the major proteins in egg white, with a 28 kDa molecular weight. The present study aimed to investigate the inhibitory effects of ovomucoid on the biofilm formation of S. mutans by suppressing virulence factors, including bacterial adherence, cellular aggregation and exopolysaccharide (EPS) production.

RESULTS

Crystal violet staining showed that biofilm formation by S. mutans was inhibited by ovomucoid at 0.25-1 mg mL-1 levels. Field emission scanning electron microscopy also confirmed this inhibition. In addition, ovomucoid reduced mature biofilm, water-insoluble EPS synthesis and the metabolic activity of bacterial cells in the biofilm. The bacterial adhesion and aggregation abilities of S. mutans were also decreased in the presence of ovomucoid. Ovomucoid downregulated the expression of comDE and vicR genes involved in the two-component signal transduction system and gtfA and ftf genes involved in EPS production.

CONCLUSION

Ovomucoid has the potential for use as an anti-biofilm agent for dental caries treatment because of its inhibitory effects on the virulence factors of S. mutans. © 2023 Society of Chemical Industry.

In-vitro polymicrobial oral biofilm model represents clinical microbial profile and disease progression during implant-related infections

AIM

Clinically relevant in-vitro biofilm models are essential and valuable tools for mechanistically dissecting the etiopathogenesis of infectious diseases and test new antimicrobial therapies. Thus, the aim of this study was to develop and test a clinically relevant in-vitro oral polymicrobial biofilm model that mimics implant-related infections in terms of microbial profile.

METHODS AND RESULTS

For this purpose, 24-well plate system was used to model oral biofilms, using three different microbial inoculums to grow in-vitro biofilms: (1) human saliva from periodontally healthy patients; (2) saliva as in inoculum 1 + Porphyromonas gingivalis strain; and (3) supra and subgingival biofilm collected from peri-implant sites of patients diagnosed with peri-implantitis. Biofilms were grown to represent the dynamic transition from an aerobic to anaerobic community profile. Subsequently, biofilms were collected after each phase and evaluated for microbiological composition, microbial counts, biofilm biomass, structure, and susceptibility to chlorhexidine (CHX). Results showed higher live cell count (P < .05) for biofilms developed from patients' biofilm inoculum, but biomass volume, dry weight, and microbiological composition were similar among groups (P > .05). Interestingly, according to the checkerboard DNA-DNA hybridization results, the biofilm developed from stimulated human saliva exhibited a microbial composition more similar to the clinical subgingival biofilm of patients with peri-implantitis, with proportions of the main pathogens closer to those found in the disease. In addition, biofilm developed using saliva as inoculum was shown to be susceptible to CHX with significant reduction in bacteria compared with biofilms without exposure to CHX (P < .05).

CONCLUSION

The findings suggested that the in-vitro polymicrobial biofilm developed from human saliva as inoculum is a suitable model and clinically relevant tool for mimicking the microbial composition of implant-related infections.

Using Antimicrobial Photodynamic Therapy with Ultrasound Devices and Bioactive Glasses as a Combined Approach for Treating Dentin Caries Lesions

Novel approaches for caries lesion removal and treatment have been proposed. This study evaluates the combined use of an experimental ultrasound, aPDT (antimicrobial photodynamic therapy) and bioactive glasses on the removal, decontamination and remineralization of dentin caries lesions. A biological model created with a duo species biofilm (Streptococcus mutans and Lactobacillus acidophilus) was used for the development of a caries-like lesion over the dentin for 7 days. Bovine dentin specimens (4 × 4 × 2 mm) were randomized according to the following caries removal techniques: bur (BUR) or ultrasound (ULT), decontamination (with or without aPDT) and remineralization materials (45S5 or F18 bioactive glasses). The following different groups were investigated: caries lesion (control); sound dentin (control); BUR; BUR + aPDT; ULT; ULT + aPDT; BUR + 45S5, BUR + F18; ULT + 45S5; ULT + F18; BUR + aPDT + 45S5; BUR + aPDT + F18; ULT + aPDT + 45S5; and ULT + aPDT + F18. Transverse microradiography (TMR), cross-sectional microhardness (CSH), FT-Raman spectroscopy and confocal microscopy (CLSM) were performed. A two-way ANOVA and Tukey's test were used (α = 0.05). (3) Results: The TMR revealed a lesion depth of 213.9 ± 49.5 μm and a mineral loss of 4929.3% vol.μm. The CSH increases as a function of depth, regardless of the group (p < 0.05). Removal with BUR (24.40-63.03 KHN) has a greater CSH than ULT (20.01-47.53 KHN; p < 0.05). aPDT did not affect the CSH (p > 0.05). No difference was observed between 45S5 or F18 (p > 0.05), but a change was observed for ULT (p > 0.05). The FT-Raman shows no differences for the phosphate (p > 0.05), but a difference is observed for the carbonate and C-H bonds. The CLSM images show that aPDT effectively inactivates residual bacteria. A combination of ULT, aPDT and bioactive glasses can be a promising minimally invasive treatment.

Effect of anaerobic or/and microaerophilic atmosphere on microcosm biofilm formation and tooth demineralization

OBJECTIVE

Microcosm biofilms can reproduce the complexity of a dental biofilm. However, different forms of cultivation have been used. The impact of the culture atmosphere on the development of microcosm biofilms and their potential to cause tooth demineralization has not yet been deeply studied. This study analyzes the effects of three experimental cultivation models (microaerophile vs. anaerobiosis vs. experimental mixed) on the colony-forming units (CFU) of the cariogenic microorganisms and tooth demineralization.

METHODOLOGY

90 bovine enamel and 90 dentin specimens were distributed into different atmospheres: 1) microaerophilia (5 days, 5% CO2); 2) anaerobiosis (5 days, jar); 3) mixed (2 days microaerophilia and 3 days anaerobiosis), which were treated with 0.12% chlorhexidine (positive control - CHX) or Phosphate-Buffered Saline (negative control - PBS) (n=15). Human saliva and McBain's saliva containing 0.2% sucrose were used for microcosm biofilm formation, for 5 days. From the second day to the end of the experiment, the specimens were treated with CHX or PBS (1x1 min/day). Colony-forming units (CFU) were counted, and tooth demineralization was analyzed using transverse microradiography (TMR). Data were subjected to two-way ANOVA and Tukey's or Sidak's test (p<0.05).

RESULTS

CHX was able to reduce total microorganism's CFU compared to PBS (differences of 0.3-1.48 log10 CFU/mL), except for anaerobiosis and microaerophilia in enamel and dentin biofilm, respectively. In the case of dentin, no effect of CHX on Lactobacillus spp. was observed. CHX significantly reduced enamel demineralization compared to PBS (78% and 22% reductions for enamel and dentin, respectively). Enamel mineral loss did not differ when compared with the other atmospheres; however, the enamel lesion depth was greater under anaerobiosis. Dentin mineral loss was lower under anaerobiosis when compared with the other atmospheres.

CONCLUSION

The type of atmosphere has, in general, little influence on the cariogenic ability of the microcosm biofilm.

Effects of BlueM® against Streptococcus mutans biofilm and its virulence gene expression

This study evaluated the antimicrobial capacity of BlueM® mouthwash against the bacterium Streptococcus mutans and its influence on gbpA gene expression as well as its cytotoxic effect on fibroblast cells. BlueM® showed antimicrobial activity, with MIC and MBC values of 0.005% and 0.01%, respectively. The MBIC was 6.25% for S. mutans. CFU count and confocal microscopy revealed significant effect of BlueM® on S. mutans biofilm pre-formed on dentin surfaces. Interestingly, the analysis of gbpA gene expression indicated a decrease in gene expression after 15 min of treatment with BlueM® at a concentration of 25%. Moreover, BlueM® exhibited low levels of cytotoxicity. In conclusion, our results showed the antimicrobial effectiveness of BlueM® against S. mutans, its ability to modulate the expression of the gbpA gene and its low cytotoxicity. This study supports the therapeutic potential of BlueM® as an alternative agent for the control of oral biofilm.

Polymethyl methacrylate resin containing ε-poly-L-lysine and 2-methacryloyloxyethyl phosphorylcholine with antimicrobial effects

STATEMENT OF PROBLEM

Polymethyl methacrylate (PMMA) is commonly used in dentistry, including as a denture base material. However, the colonization of a PMMA surface by microbial microorganisms could increase the risk of oral diseases such as denture stomatitis and gingivitis. The development of PMMA with antibacterial properties should improve its clinical application, but whether adding ε-poly-L-lysine (ε-PL) and 2-methacryloyloxyethyl phosphorylcholine (MPC) provides antimicrobial effects is unclear.

PURPOSE

This in vitro study aimed to develop a novel antibacterial PMMA resin containing the natural nontoxic antibacterial agent ε-PL and the protein repellent agent MPC. The mechanical properties, protein repellency, and antimicrobial activities of the resin were then evaluated.

MATERIAL AND METHODS

Different mass fractions of ε-PL and MPC were mixed into PMMA as the experimental groups, with unaltered PMMA as the control group. The flexural strength (n=10) and surface roughness (n=6) of the resulting mixtures were measured to determine their mechanical properties. The antiprotein properties were measured by using the micro bicinchoninic acid method (n=6). The antimicrobial effect of the resin was assessed using live/dead staining (n=6) and methyltransferase (MTT) assays (n=10). According to the variance homogeneity and normal distribution results, 1-way analysis of variance followed by the Tukey honestly significant difference test or the Welch test and the Games-Howell test were used (α=.05 for all tests).

RESULTS

No significant differences were found in the flexural strength values and surface roughness of the specimens containing 1.5% MPC and 1.5% ε-PL compared with those of the control (P>.05). The addition of ε-PL to the PMMA resin alone significantly increased its bactericidal properties (P<.05). Adding both ε-PL and MPC further increased the antibacterial activity of the PMMA resin without increasing protein adhesion more than in the control group.

CONCLUSIONS

The incorporation of both ε-PL and MPC into PMMA improved its antibacterial capacity without affecting its mechanical properties and did not increase protein adhesion. Therefore, the novel PMMA fabricated in this study shows promise for dental applications.

Biofilm reactor calibration for in vitro investigation of composite biodegradation

Introduction: The majority of biodegradation studies of composite materials use simplified models of microbial biofilm despite the apparent diversity of the oral microbiota. The use of in vitro systems of “artificial mouth” design is a step towards clarifying the synergistic effect that microbial plaque and human saliva have on composite degradation.

Aim: Establishment of functional parameters for in vitro reproduction of oral biofilms via biofilm reactor systems.

Materials and methods: The CDC Biofilm Reactor system consists of eight polypropylene sticks. The rod cover and the retaining plates are mounted in a 1-dm glass cylinder with an outlet side opening. The laboratory bioreactor has a working volume of 340 ml. The device is equipped with a four-blade magnetic stirrer. The system also includes gauging appliances and executive mechanisms for controlling and adjusting the basic parameters of the process.

Results: Determination of the operating volume of the reactor is performed prior to the experiment along with the time of reach and stabilization of the set temperature in the design which is 60 min at 120 rpm. A mathematical model is used to calculate the rate of delivery of growth medium - 11 millilitres per minute. The bioreactor is sterilized by 0.3% neomycin solution for 24 hours. Prior to the experiment the system is cleansed (via passage) with sterile water for 60 minutes.

Conclusions: The pre-calibration of a bioreactor system allows specification and refinement of its working parameters, thus engaging for accurate reproduction of the environmental conditions in the oral cavity.

Bacteria in the cavity-restoration interface after varying periods of clinical service - SEM description of distribution and 16S rRNA gene sequence identification of isolates

OBJECTIVES

To use extracted human teeth with amalgam (n = 26) or GIC (n = 3) restorations in service up to 20 years to evaluate microbiota at the cavity/restoration interface by SEM or culture.

MATERIALS AND METHODS

Extracted teeth with intracoronal restorations (n = 20) of known history (2-20 years) were fixed, split, and prepared for SEM to ascertain the pattern and structure of bacterial aggregates on cavity and restoration surfaces. Another 9 teeth were anaerobically decontaminated, split and sampled (cavity/restorations), and cultured (anaerobically, aerobically); recovered isolates were identified by 16S rRNA gene sequencing.

RESULTS

SEM showed rods, cocci, and filaments in 11/20 teeth (55%) on cavity and corresponding restoration surfaces; 4/20 (20%) on neither surface; 1/20 (5%) on just cavity; and 4/20 (20%) on just restoration. Microbial growth extended from marginal openings into the deeper interfacial microspace to varying extents but was not always evident. Restoration size or age did not predict bacterial presence. Bacteria-free surfaces (cavity/amalgam) showed possible calcification. Cultivation yielded 160 isolates, mainly Gram-positive (86%) and facultative (81%); and morphotypes of rods (43%), cocci (36%), and cocco-bacilli (18%) belonging to Actinobacteria (45%) and Firmicutes (50%). The most frequent genera were Staphylococcus, Streptococcus, Actinomyces, and Lactobacillus. Biofilms on cavity and restoration appeared independent of each other.

CONCLUSIONS

Cavity and amalgam surfaces were independently colonised and some not. The penetration of microbiota into marginal gaps varied; resembled root caries and was dominated by Gram-positive species.

CLINICAL RELEVANCE

Marginal gaps around restorations are unavoidable but are not always colonised by bacteria after long-term clinical service. Calcification of biofilms in the restorative interface may prevent further colonisation. The viable microbiota in the restorative interface resembled root caries and may be subject to ecological fluxes of activity and arrest and therefore preventative management.

Characterization of polymethylmethacrylate microspheres loaded with silver and doxycycline for dental materials applications

OBJECTIVES

The manufacturing of polymethylmethacrylate(PMMA) microspheres loaded with doxycycline(DOX) and/or silver sulfate(Ag₂SO₄) to be incorporated into glass ionomer cement(GIC).

METHODS

PMMA microspheres were manufactured with Ag₂SO₄(1-5%) and/or DOX(5-15%). Particle size, encapsulation efficiency and drug release were measured by light microscope, ICP, and HPLC. Microspheres were added to a dental GIC(20%w/w). Drug release and DTS were investigated. Minimum inhibitory concentration and antibacterial effects of PMMA microspheres into GIC materials were tested.

RESULTS

The median diameter of 50 µm was obtained for microspheres. DOX was encapsulated at an efficiency of 8.3% using a theoretical loading of 15%DOX + 5%Ag₂SO₄. The Ag₂SO₄ encapsulation efficiency was 0.63% using a theoretical loading of 5%AgSO₄. All groups showed burst release within the first day and continued released up to 15 days, with 60-83% of DOX and approximately 30% of silver. For GIC, approximately 15% of DOX and 0.18% of silver were released in a 7-day period. Microbiological results showed an antimicrobial effect against S. mutans when the lead formulation of microspheres was added. The DTS was reduced by the inclusion of microspheres.

SIGNIFICANCE

PMMA microspheres containing DOX and Ag₂SO₄ offer a sustained antimicrobial activity for dental applications and promising potential for the biomedical field.

A critical analysis of research methods and experimental models to study intracanal medicaments

In order to ensure predictable decontamination of the root canal system, chemo-mechanical preparation of the root canal space is sometimes supplemented with the use of intracanal medication. As microbial control of the root canal space is fundamental to the resolution of apical periodontitis, root canal disinfection strategies haven been researched intensively. The use of intracanal medication as a supplementary step to the chemo-mechanical preparation of the root canal space is one of them. Because of the costs and limitations of clinical research it is relevant and common practice to first evaluate alternative or new root canal disinfection modalities in laboratory studies. This involves the simulation of a root canal infection in a laboratory model, on which different disinfection strategies can be tested. When modelling the infected root canal, different levels of infection can be discriminated: suspended bacteria, microbial biofilms and infected dentine. This review describes the experimental models associated with these infection levels and critically appraises their value and methodological details. Suggestions for relevant research methods and experimental models are given, as well as some good practices for laboratory-based microbiological studies.

Mucoadhesive controlled-release formulations containing morin for the control of oral biofilms

This study aimed to evaluate the antimicrobial and anti-biofilm activity of morin on polymicrobial biofilms and its cytotoxicity in controlled-release films and tablets based on gellan gum. Polymicrobial biofilms were formed from saliva for 48 h under an intermittent exposure regime to 1% sucrose and in contact with films or tablets of gellan gum containing 2 mg of morin each. Acidogenicity, bacterial viability, dry weight and insoluble extracellular polysaccharides from biofilms were evaluated. The cytotoxicity of morin was evaluated in oral keratinocytes. Morin released from the systems reduced the viability of all the microbial groups evaluated, as well as the dry weight and insoluble polysaccharide concentration in the matrix and promoted the control of acidogenicity when compared with the control group without the substance. Morin was cytotoxic only at the highest concentration evaluated. In conclusion, morin is an effective agent and shows antimicrobial and anti-biofilm activity against polymicrobial biofilms.

Remineralizing efficacy of fluoride in the presence of oral microcosm biofilms

OBJECTIVES

The oral biofilm structure or composition can affect the penetration of remineralizing agents. Therefore, this study evaluated the remineralizing efficacy of fluoride using a pH-cycling model with oral microcosm biofilms.

METHODS

Artificial carious lesions were formed in 80 bovine incisors. The pH-cycling conditions with or without oral microcosm biofilms were applied to 40 specimens each. The pH-cycling scheme was repeated for 12 days. Fluorescence loss (ΔF,%) of early carious lesions was measured for all specimens using a quantitative light-induced fluorescence-digital camera, before and after fluoride application. Biofilms on specimens were further analyzed for red fluorescence intensity (red/green ratios) and colony-forming unit counts. The effects of pH-cycling conditions and treatments on changes in ΔF (ΔΔF) and the effects of interactions between factors were analyzed using two-way analysis of variance.

RESULTS

The fluoride-treated group with oral biofilms had an approximately 0.89-fold lower ΔΔF than the fluoride-treated group without oral biofilms (p < 0.0001). When oral biofilms were absent, the fluoride-treated group showed a 1.31-fold greater ΔΔF compared to that in the distilled water-treated group (p < 0.0001). When oral biofilms were present, the fluoride-treated group showed a 1.14-fold greater ΔΔF compared to that in the distilled water-treated group; however, this difference was not statistically significant.

CONCLUSIONS

There was a significant difference in fluoride remineralizing efficacy based on the presence of biofilms on early carious lesions. Therefore, fluoride remineralization assessment in the absence of oral biofilms could lead to an overestimation of efficacy.

CLINICAL SIGNIFICANCE

Fluoride application might not have a robust remineralization effect on early carious lesions in the presence of a mature biofilm on the tooth surface.

Challenges with Wound Infection Models in Drug Development

Wound research is an evolving science trying to unfold the complex untold mechanisms behind the wound healing cascade. In particular, interest is growing regarding the role of microorganisms in both acute and chronic wound healing. Microbial burden plays an important role in the persistence of chronic wounds, ultimately resulting in delayed wound healing. It is therefore important for clinicians to understand the evolution of infection science and its various etiologies. Therefore, to understand the role of bacterial biofilm in chronic wound pathogenesis, various in vitro and in vivo models are required to investigate biofilms in wound-like settings. Infection models should be refined comprising an important signet of biofilms. These models are eminent for translational research to obtain data for designing an improved wound care formulation. However, all the existing models possess limitations and do not fit properly in the model frame for developing wound care agents. Among various impediments, one of the major drawbacks of such models is that the wound they possess does not mimic the wound a human develops. Therefore, a novel wound infection model is required which can imitate the human wounds. This review article mainly discusses various in vitro and in vivo models showing microbial colonization, their advantages and challenges. Apart from these models, there are also present ex vivo wound infection models, but this review mainly focused on various in vitro and in vivo models available for studying wound infection in controlled conditions. This information might be useful in designing an ideal wound infection model for developing an effective wound healing formulation.

Endogenous nitric oxide-generating surfaces via polydopamine-copper coatings for preventing biofilm dispersal and promoting microbial killing

INTRODUCTION

Peri-implantitis is a bacterially induced inflammatory disease which affects the hard and soft tissues around a dental implant. Microbial biofilm formation is an important causative factor in peri-implantitis. The aim of this study is to develop an effective multifunctional surface coating for antimicrobial property and to counteract oral biofilm-associated infections via a single polydopamine copper coating (PDAM@Cu) on titanium implant surface to regulate endogenous nitric oxide (NO) generation.

METHODS

PDAM@Cu coatings were made with different concentrations of CuCl₂ on titanium surfaces with a simple dip coating technique. Coatings were characterised to evaluate Cu concentrations as well as NO release rates from the coatings. Further, salivary biofilms were made on the coatings using Brain Heart Infusion (BHI) media in an anaerobic chamber. Biofilms were prepared with three different mixtures, one of which was saliva only, the second had an addition of sheep's blood, and the third was prepared with NO donors S-nitrosoglutathione (GSNO) and L-glutathione (GSH) in the mixture of saliva and blood to evaluate the effects of endogenously produced NO on biofilms. The effectiveness of coated surfaces on biofilms were assessed using four different methods, namely, crystal violet assay, scanning electron microscopy imaging, 2,3-bis (2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium hydroxide (XTT) metabolic assay, and live/dead staining.

RESULTS

NO release rates could be controlled with different Cu concentration in PDAM@Cu coatings. NO generated from the PDAM@Cu coatings effectively induced dispersal of biofilms shown by the reduction in biofilm biomass as well as reduced biofilm attachment in samples prepared with blood and NO donors. Cu ions released from the PDAM@Cu coatings resulted in killing of the dispersed bacteria, which was evidenced by the live/dead cell staining and reduced metabolic activity noted from the XTT assay. In contrast, samples prepared with saliva showed no significant reduction in biofilms, indicating the important effect of endogenously generated NO on biofilm dispersal.

CONCLUSION

In conclusion, PDAM@Cu coatings with NO generating surfaces have a dual anti-biofilm function, with a synergistic effect on biofilm dispersal from regulated NO generation and bactericidal effects from Cu ions from the coatings.

The dual anti-caries effect of carboxymethyl chitosan nanogel loaded with chimeric lysin ClyR and amorphous calcium phosphate

In this study, we evaluated the anti-biofilm and anti-demineralization abilities of a novel material, CMC-ClyR-ACP nanogel, designed by loading the chimeric lysin ClyR and amorphous calcium phosphate (ACP) into a nanocarrier material carboxymethyl chitosan (CMC), in a demineralization model. Dynamic light scattering, transmission electron microscopy, and Fourier transmission infrared spectroscopy showed that CMC-ClyR-ACP nanogel was synthesized successfully. Enamel samples prepared from premolars were divided into five groups according to their treatments with: (i) double distilled water ddH₂ O, (ii) CMC-ACP, (iii) CMC-ClyR-ACP, (iv) ClyR, or (v) 0.12% chlorhexidine. Streptococcus mutans was allowed to form biofilms on the teeth for two days before treatment procedures were carried out from day 3 to day 6. The relative biofilm viability analyzed by Cell Counting Kit-8 showed that it was significantly lower (at 55.7%) for CMC-ClyR-ACP than seen for ddH₂ O (89.9%), which was consistent with result of confocal laser scanning microscopy. The percentage surface hardness loss of CMC-ClyR-ACP (29.2%) was significantly lower than that of CMC-ACP (51.0%) and ClyR (58.7%) alone, and there was no significant difference between CMC-ClyR-ACP and chlorhexidine (26.9%), which was confirmed by scanning electron microscopy. Therefore, CMC-ClyR-ACP nanogel may be an effective strategy for the control of enamel demineralization.

Establishment of microcosm biofilm models that reproduce a cariogenic diet intake

Biofilms were developed from human saliva on bovine enamel discs in four experimental conditions to investigate dental caries development: feast and famine (M1), abundance and scarcity (M2), three meals daily (M3), and three meals plus two snacks daily (M4). The main difference between these models was the diet for microbial growth. The evaluations included verifying the pH of the spent culture media and analyzing the enamel discs for demineralization (microhardness and roughness) and biofilms (biomass, viable populations of mutans streptococci, and total microbiota). Two major behaviors were observed: M1 and M2 promoted an acidic environment, while M3 and M4 maintained pH values closer to neutral. The demineralization process was slower in the neutral groups but more pronounced in M3, while a greater increase in microbiota and biomass was observed over time for both neutral groups. Thus, the M3 model was better at mimicking the oral environment that leads to demineralization.

Characterization of polymicrobial biofilms obtained from saliva or carious lesions in dentin

This study aimed to compare the formation of polymicrobial biofilms using carious dentin or saliva as inoculum for application in in vitro microbiological studies on caries research. For biofilm growth, combined samples of infected dentin or saliva from three donors were used. The biofilms were grown on glass coverslips, under a regimen of intermittent exposure (6 h day^-1) to 1% sucrose for 4 days. Total bacterial loads, as well as specific aciduric bacteria and mutans streptococci loads were quantified and correlated with biofilm acidogenicity and susceptibility to chlorhexidine. The data were evaluated using the Student's-t, Mann Whitney and Kruskal-Wallis tests. The two biofilms showed similar microbial loads (total bacteria, aciduric bacteria and mutans streptococci) on day 4, and high acidogenicity after 48 h and were susceptible to chlorhexidine at different time intervals. In conclusion, both dentin and saliva can be used as an inoculum in in vitro studies of processes related to biofilm formation.

In vitro Synergy of Polyphenolic Extracts From Honey, Myrtle and Pomegranate Against Oral Pathogens, S. mutans and R. dentocariosa

The increasing incidence rate of oral diseases, the wide spread of antimicrobial resistance, and the adverse effects of conventional antibiotics mean alternative prevention and treatment options are needed to counteract oral pathogens. In this regard, our study aims to evaluate the antibacterial activity of polyphenolic extracts prepared from acacia honey, myrtle leaves, and pomegranate peel against cariogenic bacteria, such as Streptococcus mutans and Rothia dentocariosa. The chemical-physical parameters of acacia honey and the RP-HPLC polyphenolic profile of pomegranate peel extract have been previously described in our studies, while the characterization of myrtle extract, performed by HPLC analysis, is reported here. All the extracts were used singly and in binary combinations to highlight any synergistic effects. Moreover, the extracts were tested in association with amoxicillin to evaluate their ability to reduce the effective dose of this drug in vitro. The values of minimal inhibitory concentrations and minimal bactericidal concentrations have been used to quantitatively measure the antibacterial activity of the single extracts, while the fractional inhibitory concentration index has been considered as predictor of in vitro anticariogenic synergistic effects. Finally, a time-kill curve method allowed for the evaluation of the bactericidal efficacy of the combined extracts. The microbiological tests suggest that acacia honey, myrtle, and pomegranate extracts are able to inhibit the cariogenic bacteria, also with synergistic effects. This study provides useful and encouraging results for the use of natural extract combinations alone or in association with antibiotics (adjuvant therapy) as a valid alternative for the prevention and treatment of oral infectious diseases.

Microbial Etiology and Prevention of Dental Caries: Exploiting Natural Products to Inhibit Cariogenic Biofilms

Dental caries is one of the most common microbe-mediated oral diseases in human beings. At present, the accepted etiology of caries is based on a four-factor theory that includes oral microorganisms, oral environment, host, and time. Excessive exposure to dietary carbohydrates leads to the accumulation of acid-producing and acid-resistant microorganisms in the mouth. Dental caries is driven by dysbiosis of the dental biofilm adherent to the enamel surface. Effective preventive methods include inhibiting the cariogenic microorganisms, treatment with an anti-biofilm agent, and sugar intake control. The goal is to reduce the total amount of biofilm or the levels of specific pathogens. Natural products could be recommended for preventing dental caries, since they may possess fewer side effects in comparison with synthetic antimicrobials. Herein, the mechanisms of oral microbial community development and functional specialization are discussed. We highlight the application of widely explored natural products in the last five years for their ability to inhibit cariogenic microorganisms.

Development of a multispecies periodontal biofilm model within a stirred bioreactor

The objective of this work was to develop a subgingival biofilm model using a stirred bioreactor. Discs of bovine teeth were adapted to a stirred bioreactor filled with a culture medium containing bacterial species associated with periodontal health or disease. After anaerobic incubation, the biofilms growing on the substratum surfaces were collected and analyzed. The mean number of Colony-forming Units (CFUs) varied, but with no difference between 3 and 7 days of biofilm formation (p > 0.05). Scanning Electron Microscopy (SEM) analysis showed a uniform biofilm layer covering the cement layer of the root surface containing bacteria with diverse morphology. In checkerboard DNA-DNA hybridization, bacterial species were identified in both biofilms. In conclusion, a subgingival biofilm model was developed using a stirred bioreactor, allowing the in vitro reproduction of complex microbial communities. This is an advanced model that may be useful to mimic complex clinical periodontal biofilms.

Effects of a sub-minimum inhibitory concentration of chlorhexidine gluconate on the development of in vitro multi-species biofilms

Following antimicrobial administrations in oral environments, bacteria become exposed to a sub-minimum inhibitory concentration (sub-MIC), which can induce in vitro single-species biofilms. This study explored the effects of chlorhexidine gluconate (CHG) at a sub-MIC on in vitro multi-species biofilms comprising Streptococcus mutans, Streptococcus oralis and Actinomyces naeslundii. CHG at a sub-MIC was found to induce in vitro biofilm growth, although the bacterial growth was not significantly different from that in the control. The gene transcription related to S. mutans multi-species biofilm formation with CHG at a sub-MIC was significantly higher than that of the control, but this was not found in S. mutans single-species biofilms. The bio-volume of extracellular polysaccharides with CHG at a sub-MIC was significantly higher than that of the control. This suggests that CHG at a sub-MIC may promote the development of multi-species biofilms by affecting the gene transcription related to S. mutans biofilm formation.

A Multispecies Biofilm In Vitro Screening Model of Dental Caries for High-Throughput Susceptibility Testing

There is a current need to develop and optimize new therapeutics for the treatment of dental caries, but these efforts are limited by the relatively low throughput of relevant in vitro models. The aim of this work was to bridge the 96-well microtiter plate system with a relevant multispecies dental caries model that could be reproducibly grown to allow for the high-throughput screening of anti-biofilm therapies. Various media and inoculum concentrations were assessed using metabolic activity, biomass, viability, and acidity assays to determine the optimal laboratory-controlled conditions for a multispecies biofilm composed of Streptococcus gordonii, Streptococcus mutans, and Candida albicans. The selected model encompasses several of the known fundamental characteristics of dental caries-associated biofilms. The 1:1 RPMI:TSBYE 0.6% media supported the viability and biomass production of mono- and multispecies biofilms best. Kinetic studies over 48 h in 1:1 RPMI:TSBYE 0.6% demonstrated a stable biofilm phase between 10 and 48 h for all mono- and multispecies biofilms. The 1:1:0.1 S. gordonii: S. mutans: C. albicans multispecies biofilm in 1:1 RPMI:TSBYE 0.6% is an excellent choice for a high-throughput multispecies model of dental caries. This high-throughput multispecies model can be used for screening novel therapies and for better understanding the treatment effects on biofilm interactions and stability.

Comparison between static and semi-dynamic models for microcosm biofilm formation on dentin

OBJECTIVE

Microcosm biofilm has been applied to induce carious lesions in dentin. However, no study has been done to compare the impact of the type of model for providing nutrients to microcosm biofilm formation on dentin. This study compared the performance of two kinds of models (static and semi-dynamic) on the biofilm formation and the development of dentin carious lesions.

MATERIAL AND METHODS

In both models, biofilm was produced using inoculum from pooled human saliva mixed with McBain saliva for the first 8 h (5% CO2 and 37°C). Afterwards, for the static model, the samples were placed in 24-wells microplate containing McBain saliva with 0.2% sucrose, which was replaced at 24 h. In the semi-dynamic model, the samples were submitted to artificial mouth system with continuous flow of McBain saliva with 0.2% sucrose (0.15 ml/min, 37°C) for 10 h a day (for the other 14 h, no flow was applied, similarly to the static model). After 5 days, biofilm viability was measured by fluorescence and dentin demineralization by transverse microradiography.

RESULTS

Biofilm viability was significantly lower for the static compared with semi-dynamic model, while dentin demineralization was significantly higher for the first one (p<0.05). The static model was able to produce a higher number of typical subsurface lesions compared with the semi-dynamic model (p<0.05).

CONCLUSIONS

The type of model (static and semi-dynamic) applied in the microcosm biofilm may have influence on it's viability and the severity/profile of dentin carious lesions.

CPP-ACP Promotes SnF2 Efficacy in a Polymicrobial Caries Model

Dental caries is associated with plaque dysbiosis, leading to an increase in the proportions of acidogenic and aciduric bacteria at the expense of alkali-generating commensal species. Stannous fluoride (SnF₂) slows the progression of caries by remineralization of early lesions but has also been suggested to inhibit glycolysis of aciduric bacteria. Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) promotes fluoride remineralization by acting as a salivary biomimetic that releases bioavailable calcium and phosphate ions, and the peptide complex has also been suggested to modify plaque composition. We developed a polymicrobial biofilm model of caries using 6 bacterial species representative of supragingival plaque that were cultured on sound human enamel and pulsed with sucrose 4 times a day to produce a high cariogenic challenge. We used this model to explore the mechanisms of action of SnF₂ and CPP-ACP. Bacterial species in the biofilms were enumerated with 16S rRNA gene sequence analyses, and mineral loss and lesion formation were determined in the enamel directly under the polymicrobial biofilms via transverse microradiography. The model tested the twice-daily addition of SnF₂, CPP-ACP, or both. SnF₂ treatment reduced demineralization by 50% and had a slight effect on the composition of the polymicrobial biofilm. CPP-ACP treatment caused a similar inhibition of enamel demineralization (50%), a decrease in Actinomyces naeslundii and Lactobacillus casei abundance, and an increase in Streptococcus sanguinis and Fusobacterium nucleatum abundance in the polymicrobial biofilm. A combination of SnF₂ and CPP-ACP resulted in a greater suppression of the acidogenic and aciduric bacteria and a significant 72% inhibition of enamel demineralization.

Characterisation of a sucrose-independent in vitro biofilm model of supragingival plaque

OBJECTIVES

Sugar consumption has been decreasing in Japan, suggesting higher rates of sucrose-independent supragingival plaque formation. For developing an in vitro biofilm model of sucrose-independent supragingival plaque, this study aimed to investigate the compositions and functions on contributing to cariogenicity in comparison with sucrose-dependent biofilm.

MATERIALS AND METHODS

An in vitro multispecies biofilm containing Actinomyces naeslundii, Streptococcus gordonii, S. mutans, Veillonella parvula and Fusobacterium nucleatum was formed on 24-well plates in the absence or presence of 1% sucrose. Compositions were assessed by plate culture, scanning electron microscopy and confocal laser scanning microscopy after fluorescent in situ hybridisation or labelling of extracellular polymeric substances (EPS). Functions were assessed by acidogenicity, adherence strength and sensitivities to anticaries agents.

RESULTS

Although both biofilms exhibited a Streptococcus predominant bacterial composition, there were differences in bacterial and EPS compositions; in particular, little glucan EPS was observed in sucrose-independent biofilm. Compared with sucrose-dependent biofilm, acidogenicity, adherence strength and antimicrobial resistance of sucrose-independent biofilm were only slightly lower. However, dextranase degradation was substantially lower in sucrose-independent biofilm.

CONCLUSION

Our findings suggest that sucrose-independent biofilm may have cariogenicity as with sucrose-dependent biofilm. These in vitro models can help further elucidate plaque-induced caries aetiology and develop new anticaries agents.

In vitro biofilm models to study dental caries: a systematic review

The aim of this systematic review is to characterize and discuss key methodological aspects of in vitro biofilm models for caries-related research and to verify the reproducibility and dose-response of models considering the response to anti-caries and/or antimicrobial substances. Inclusion criteria were divided into Part I (PI): an in vitro biofilm model that produces a cariogenic biofilm and/or caries-like lesions and allows pH fluctuations; and Part II (PII): models showing an effect of anti-caries and/or antimicrobial substances. Within PI, 72.9% consisted of dynamic biofilm models, while 27.1% consisted of batch models. Within PII, 75.5% corresponded to dynamic models, whereas 24.5% corresponded to batch models. Respectively, 20.4 and 14.3% of the studies reported dose-response validations and reproducibility, and 32.7% were classified as having a high risk of bias. Several in vitro biofilm models are available for caries-related research; however, most models lack validation by dose-response and reproducibility experiments for each proposed protocol.

Dental Biofilm and Laboratory Microbial Culture Models for Cariology Research

Dental caries form through a complex interaction over time among dental plaque, fermentable carbohydrate, and host factors (including teeth and saliva). As a key factor, dental plaque or biofilm substantially influence the characteristic of the carious lesions. Laboratory microbial culture models are often used because they provide a controllable and constant environment for cariology research. Moreover, they do not have ethical problems associated with clinical studies. The design of the microbial culture model varies from simple to sophisticated according to the purpose of the investigation. Each model is a compromise between the reality of the oral cavity and the simplification of the model. Researchers, however, can still obtain meaningful and useful results from the models they select. Laboratory microbial culture models can be categorized into a closed system and an open system. Models in the closed system have a finite supply of nutrients, and are also simple and cost-effective. Models in the open system enabled the supply of a fresh culture medium and the removal of metabolites and spent culture liquid simultaneously. They provide better regulation of the biofilm growth rate than the models in the closed system. This review paper gives an overview of the dental plaque biofilm and laboratory microbial culture models used for cariology research.