Amperometric sensor based on multi-walled carbon nanotube and poly (Bromocresol purple) modified carbon paste electrode for the sensitive determination of L-tyrosine in food and biological samples

Exploring nanoarchitectonics and optical properties of PAA-ZnO@BCP wide-band-gap organic semiconductors

This work reports the formation of polyacrylic acid (PAA)-zinc oxide (ZnO)-bromocresol purple (BCP), (PAA-ZnO@ (0.00-0.01) BCP wide-bandgap organic semiconductors deposited onto glass substrates via a sol-gel polymerization process. These semiconductor films were deposited on glass substrates using a spin coating and then dried at 60 °C. The PAA-ZnO film appeared to be of amorphous phase, and films loaded with BCP revealed semicrystalline behavior. The surface of the films exhibited adherence and extended grains. The hydrogen bonds formed between PAA-ZnO and the BCP dye within the PAA-ZnO@BCP films was performed using FTIR-spectroscopy. The prepared nanocomposites demonstrate an indirect band transition which is affected slightly by adding ZnO and BCP dye. Optical parameters such as the absorption coefficient, the refractive index, the dielectric constant, optical conductivity, optical depth, and optical electronegativity of the prepared nanocomposites were studied as functions of incident light energy (wavelength). The PAA carbonyl group n-π* transition and BCP aromatic ring π-π* transitions were detected at about 285 (for all samples) and 432 nm (for BCP loaded samples), respectively. The superior photoluminescence characteristics observed in the BCP/PAA-Zn films excited with a wavelength of 250 nm indicated the successful loading of the BCP dye during the self-aggregation of the PAA-Zn film.

The colorful world of sulfonephthaleins: Current applications in analytical chemistry for "old but gold" molecules

Sulfonephthaleins represent one of the most common and widely employed reactive dyes in analytical chemistry, thanks to their stability, low-cost, well-visible colors, reactivity and possibilities of chemical modification. Despite being first proposed in 1916, nowadays, these molecules play a fundamental role in biological and medical applications, environmental analyses, food quality monitoring and other fields, with a particular focus on low-cost and disposable devices or methods for practical applications. Since up to our knowledge, no reviews or book chapters focused explicitly on sulfonephthaleins have ever been published, in this review, we will briefly describe sulfonephthaleins history, their acid-base properties will be discussed, and the most recent applications in different fields will be presented, focusing on the last ten years literature (2014-2023). Finally, safety and environmental issues will be briefly discussed, despite being quite controversial.

Conducting dyes as electro-active monomers and polymers for detecting analytes in biological and environmental samples

Currently, electrochemical sensors are regarded as an efficient tool for the biological and environmental sensing. Electrochemical sensors, such as voltammetric, amperometric, and impedimetric sensors, have gained great attention due to their simplicity, sensitivity, and selectivity. The performance of these electrochemical sensors could be enhanced by surface engineered nano/micro structured materials with conducting dyes/redox species. In this review, a great focus has been put on the redox-active dyes because of their electronic, optical, electrochromic, and conductivity properties. The mechanisms of oxidation and subsequent polymerization of different redox-active dyes at the surface of electrodes have been studied. Additionally, their role in catalyzing the oxidation or reduction of the target analytes at the surfaces of electrodes has also been highlighted. The redox-active dyes were used as electrochemical probes for detecting various analytes in biological and environmental samples. Overall, redox-active dyes are considered promising conducting polymers for the assessment of many analytes such as drugs, pesticides, surfactants, and heavy metal ions.

Electroanalytical biosensor based on GOx/FCA/PEG-modified SWCNT electrode for determination of glucose

This paper describes a simple electrochemical sensing platform based on single-walled carbon nanotube (SWCNT) electrodes for glucose detection. The device fabrication using O2-plasma treatment allows precision and uniformity for the construction of three SWCNT electrodes on the flexible plastic substrate. Glucose assay can be simply accomplished by introducing a glucose sample into the fabricated biosensor. The marked electrocatalytic and biocompatible properties of biosensors based on SWCNT electrodes with the incorporation of ferrocenecarboxylic acid and polyethylene glycol enable effective amperometric measurement of glucose at a low oxidation potential (0.3 V) with low interferences from coexisting species. The device shows efficient electroanalytical performances with high sensitivity (5.5 μA·mM−1·cm−2), good reproducibility (CV less than 3%), and long-term stability (over a month). A linear range of response was found from 0 to 10 mM of glucose with a fast response time of 10 s. This attractive electroanalytical device based on GOx/FCA/PEG/SWCNT electrodes offers a promising system to facilitate a new approach for diverse biosensors and electrochemical devices.

Biomarkers for Early Diagnosis of Ovarian Carcinoma

The leading cause of gynecological cancer-related morbidity and mortality is ovarian cancer (OC), which is dubbed a silent killer. Currently, OC is a target of intense biomarker research, because it is often not discovered until the disease is advanced. The goal of OC research is to develop effective tests using biomarkers that can detect the disease at the earliest stages, which would eventually decrease the mortality, thereby preventing recurrence. Therefore, there is a pressing need to revisit the existing biomarkers to recognize the potential biomarkers that can lead to efficient predictors for the OC diagnosis. This Perspective covers an update on the currently available biomarkers used in the triaging of OC to gain certain insights into the potential role of these biomarkers and their estimation that are crucial to the understanding of neoplasm progression, diagnostics, and therapy.

Bromocresol purple in the processes of cation-anionic interactions in aqueous solutions: UV-Vis spectroscopy and computer simulation of dissimilar association

The formation of associates between single- or double-charged anions of bromocresol purple (3,3'-dimethyl-5,5'-dibromophenolsulfonephthalein) and single-charged cations of cyanines (quinaldine blue, quinaldine red) has been investigated. The equilibrium constants of the association have been determined on the basis of UV-Vis spectroscopy data. The energy of the cation-anion interaction (the standard enthalpy of formation of ions and associates), as well as the probable structure of associates, were established using the PM7 semiempirical method. The presented results can be useful in the development of new spectroscopic methods for the detection of organic additives in water (e.g. acetone) due to the spectral properties of dissimilar associates.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

High performance electrochemical method for simultaneous determination dopamine, serotonin, and tryptophan by ZrO2-CuO co-doped CeO2 modified carbon paste electrode

In this research, a paste containing ZrO₂-CuO-CeO₂ ternary nanocomposite and graphene (Gr) was used in constructing a carbon paste sensor for monitoring biomolecules including dopamine (Dop), serotonin (Ser) and tryptophan (Trp). The scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) were utilized for ZrO₂-CuO-CeO₂ ternary nanocomposite characterization. The obtained data show that, the ZrO2-CuO-CeO₂/Gr and synergetic effect of using these three-metal oxide nanoparticles, could effectively improve the electron transfer kinetic and exhibit a high electrocatalytic activity, making it serve as a powerful tool for biomolecules analysis. The differential pulse (DP) and cycle voltammetry (CV) methods were applied for investigating electrochemical treatment of the analytes. In comparison to all of the previous voltammetric reports, this research has the lowest detection limit and widest linear range. The calibration curves in the optimum conditions were linear over the range of 0.008-7.2 and 7.2-185 μM for Dop, 0.008-7.9 and 7.9-205 μM for Ser and 0.009-8.6 and 8.6-194 μM for Trp. The calculated limit of detection (LOD) was 3.09, 3.49 and 5.32 nM for Dop, Ser and Trp, respectively. The applicability of this sensing device was tested by monitoring Dop, Ser and Trp in the human urine and plasma samples. The recovery percentage of the analysis in the real samples was between 95.6 and 104.74; also, the data of determination of Dop, Ser and Trp with ZrO₂-CuO-CeO₂/Gr/CPE was well close to HPLC data. The obtained result demonstrates that the ZrO₂-CuO-CeO₂/Gr/CPE has good selectivity, stability, reproducibility, and repeatability, and can be used for the routine analysis of Dop, Ser and Trp.

Polyphenazine and polytriphenylmethane redox polymer/nanomaterial-based electrochemical sensors and biosensors: a review

In recent years, an increasing number of studies has demonstrated that redox polymers can be used in simple and effective electrochemical sensing platforms due to their fast electron transfer and electrocatalytic ability. To develop more sensitive and selective electrochemical (bio)sensors, the electrocatalytic properties of redox polymers and the electrical, mechanical, and catalytic properties of various nanomaterials are combined. This review aims to summarize and contribute to the development of (bio)sensors based on polyphenazine or polytriphenylmethane redox polymers combined with nanomaterials, including carbon-based nanomaterials, metal/metal oxide, and semiconductor nanoparticles. The synthesis, preparation, and modification of these nanocomposites is presented and the contribution of each material to the performance of (bio)sensor has been be examined. It is explained how the combined use of these redox polymers and nanomaterials as a sensing platform leads to improved analytical performance of the (bio)sensors. Finally, the analytical performance characteristics and practical applications of polyphenazine and polytriphenylmethane redox polymer/nanomaterial-based electrochemical (bio)sensors are compared and discussed.

Simultaneous Detection of Ascorbic Acid, Dopamine, and Uric Acid Using a Novel Electrochemical Sensor Based on Palladium Nanoparticles/Reduced Graphene Oxide Nanocomposite

A fresh strategy based on two-step electrochemical reduction for the fabrication of palladium nanoparticles/reduced oxide nanocomposite-modified glass carbon electrode (PdNPs/rGO/GCE) was established in this study. Field emission scanning electron microscopy (FESEM) images showed that spherical PdNPs were evenly distributed on the surface of rGO-modified electrode (rGO/GCE), and the introduction of PdNPs has no effect on the morphology of rGO. Electrochemical impedance spectroscopy (EIS) studies revealed that the conductivity of PdNPs/rGO/GCE was higher than that of rGO/GCE and bare GCE. The electrochemical performances of PdNPs/rGO/GCE sensor were investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry using ascorbic acid (AA), dopamine (DA), and uric acid (UA) as analytes. At the optimized conditions, wide linear ranges of 0.5–3.5 mM (R² = 0.99), 3–15 μM (R² = 0.99) and 15–42 μM (R² = 0.99), and 0.3–1.4 mM (R² = 0.99) towards AA, DA, and UA in ternary mixture were observed, respectively. In addition to superior anti-interference capability, fast response (≤5 s), excellent reproducibility, and good long-term stability were also given by this sensor. These results suggested that PdNPs/rGO/GCE is promising for the simultaneous detection of AA, DA, and UA in practical application.

A voltammetric sensor based on reduced graphene oxide-hemin-Ag nanocomposites for sensitive determination of tyrosine

A novel voltammetric sensor was designed and used for the determination of l-tyrosine (l-Tyr) by surface modification of a glassy carbon electrode with reduced graphene oxide-hemin-Ag (rGO-H-Ag) nanocomposites. The nanocomposites were synthesized by a facile one-pot hydrothermal method and characterized by means of transmission electron microscopy and Raman spectroscopy. The determination of l-Tyr was investigated by cyclic voltammetry and further quantified using differential pulse voltammetry. The results revealed a significant enhanced electrochemical oxidation effect for l-Tyr at the nanocomposites modified electrode. Two linear ranges from 0.1 to 100 μM and 100 to 1000 μM as well as a low detection limit of 30 nM (S/N = 3) were obtained. In addition, the sensor also demonstrated good selectivity, reproducibility and stability.

A novel electrochemical sensor for the sensitive determination of l-Tyr was designed with a rGO-H-Ag nanocomposite modified electrode.

Voltammetric Determination of Guaifenesin in Pharmaceuticals and Urine Samples Based on Poly(Bromocresol Purple) Modified Glassy Carbon Electrode

Introduction:

The electro-oxidation behavior of expectorant drug Guaifenesin (GUF) was studied on poly(bromocresol purple) modified Glassy Carbon Electrode (GCE) by Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV) methods.

Materials and Methods:

GCE was modified with electropolymerization of Bromocresol Purple (BP) monomer for sensitive determination of GUF with voltammetric methods. The oxidation process of GUF showed irreversible and diffusion controlled behavior. The linearity has been obtained in the range from 1.00 × 10-7 to 2.00 × 10-5 M with the limit of detection 3.658 × 10-9 M for DPV in 0.1 M phosphate buffer solution (PBS) at pH 3.0.

Results and Conclusion:

Fully validated differential pulse voltammetry was successfully applied for the determination of GUF in pharmaceutical dosage forms and urine samples obtained satisfying results.

Novel amperometric genosensor based on peptide nucleic acid (PNA) probes immobilized on carbon nanotubes-screen printed electrodes for the determination of trace levels of non-amplified DNA in genetically modified (GM) soy

A novel amperometric genosensor based on PNA probes covalently bound on the surface of Single Walled Carbon Nanotubes - Screen Printed Electrodes (SWCNT-SPEs) was developed and validated in samples of non-amplified genomic DNA extracted from genetically modified (GM)-Soy. The sandwich assay is based on a first recognition of a 20-mer portion of the target DNA by a complementary PNA Capture Probe (CP) and a second hybridization with a PNA Signalling Probe (SP), with a complementary sequence to a different portion of the target DNA. The SP was labelled with biotin to measure current signal by means of a final incubation of an Alkaline Phosphatase-streptavidin conjugate (ALP-Strp). The electrochemical detection was carried out using hydroquinone diphosphate (HQDP) as enzymatic substrate. The genoassay provided a linear range from 250 pM to 2.5 nM, LOD of 64 pM and LOQ of 215 pM Excellent selectivity towards one base mismatch (1-MM) or scrambled (SCR) sequences was obtained. A simple protocol for extraction and analysis of non-amplified soybean genomic DNA without sample treatment was developed and validated. Our study provides insight into how the outstanding recognition efficiency of PNAs can be combined with the unique properties of CNTs in terms of signal response enhancement for direct detection of genomic DNA samples at the level of interest without previous amplification.

Single-Walled Carbon Nanotubes as Enhancing Substrates for PNA-Based Amperometric Genosensors

A new amperometric sandwich-format genosensor has been implemented on single-walled carbon nanotubes screen printed electrodes (SWCNT-SPEs) and compared in terms of performance with analogous genoassays developed using the same methodology on non-nanostructured glassy carbon platforms (GC-SPE). The working principle of the genosensors is based on the covalent immobilization of Peptide Nucleic Acid (PNA) capture probes (CP) on the electrode surface, carried out through the carboxylic functions present on SWCNT-SPEs (carboxylated SWCNT) or electrochemically induced on GC-SPEs. The sequence of the CP was complementary to a 20-mer portion of the target DNA; a second biotin-tagged PNA signalling probe (SP), with sequence complementary to a different contiguous portion of the target DNA, was used to obtain a sandwich hybrid with an Alkaline Phosphatase-streptavidin conjugate (ALP-Strp). Comparison of the responses obtained from the SWCNT-SPEs with those produced from the non-nanostructured substrates evidenced the remarkable enhancement effect given by the nanostructured electrode platforms, achieved both in terms of loading capability of PNA probes and amplification of the electron transfer phenomena exploited for the signal transduction, giving rise to more than four-fold higher sensitivity when using SWCNT-SPEs. The nanostructured substrate allowed to reach limit of detection (LOD) of 71 pM and limit of quantitation (LOQ) of 256 pM, while the corresponding values obtained with GC-SPEs were 430 pM and 1.43 nM, respectively.

Effect of GO nanosheets on spectrophotometric determination of tyrosine in urine and serum using nitrosonaphthol

Here, we aimed to use graphene oxide to improve the selectivity and sensitivity of Tyr determination via the reaction with 1-nitroso-2-naphthol as a selective reagent of Tyr. The reaction between Tyr and 1-nitroso-2-naphthol in absence and presence of GO was studied spectrophotometrically. Different parameters such as concentrations, temperature, incubation time were optimized. The obtained data showed that the maximum absorbance was achieved by using 2 mL of 0.03% 1-nitroso-2-naphthol at temperature 60 °C for 10 min. On the basis of calibration curve of various concentrations of Tyr in the presence of 20 μg mL^-1 GO, the limit of detection was 6.4 × 10^-6 M (1.15 μg mL^-1), where in absence of GO was 1.1 × 10^-5 M (19.9 μg mL^-1). The selectivity of Tyr in presence of other amino acids and phenols was studied with and without GO. The data obtained revealed that the selectivity of Tyr in presence of GO with respect to some amino acids and phenols was improved. The proposed method has been applied for the determination of Tyr in urine and serum samples. Therefore, GO is a powerful catalytic surface for the sensitive and selective determination of Try in biological fluids.

A dual ammonia-responsive sponge sensor: preparation, transition mechanism and sensitivity

PDMS-PU (polydimethylsiloxane-polyurethane) sponge decorated with In(OH)3 (indium hydroxide) and BCP (bromocresol purple) particles is shown to be a room-temperature ammonia sensor with high sensitivity and excellent reproducibility; it can accomplish real-time detection and monitoring of ammonia in the surrounding environment. The superhydrophobic and yellowish In(OH)3-BCP-TiO2-based ammonia-responsive (IBT-AR) sponge changes to a purple superhydrophilic one when exposed to ammonia. Notably, after reacting with ammonia, the sponge can recover its original wettability and color after heating in air. The wettability, color and absorption signal of IBT-AR sponge have been measured for sensing ammonia using the water contact angle, macroscopic observation and UV-vis absorption spectrometry, respectively. The minimum ammonia concentrations that can be detected by the sponge wettability, color and absorption signal are 0.5%, 1.4 ppm and 50 ppb, respectively. This kind of sponge with smart wettability and color is a promising new ammonia detector.

Competitive amperometric immunosensor for determination of p53 protein in urine with carbon nanotubes/gold nanoparticles screen-printed electrodes: A potential rapid and noninvasive screening tool for early diagnosis of urinary tract carcinoma

Since p53 protein has become recognized biomarker for both diagnostic and therapeutic purposes in oncological diseases with particular relevance for bladder cancer, it is highly desirable to search for a novel sensing tool for detecting the patient's p53 level at the early stage. Here we report the first study on the development and validation of a novel disposable competitive amperometric immunosensor for determination of p53 protein at subnanomolar levels, based on p53 immobilization on gold nanoparticles/carbon nanotubes modified screen-printed carbon electrodes. The assay protocol requires the use of single anti-p53 mouse monoclonal antibody (DO-7 clone), able to recognize both wild-type and mutant p53. The developed immunosensor as well as the protocol of the electrochemical immunoassay were optimized by means of an experimental design procedure to assess the suitability of the device to be validated and applied for the determination of p53 in untreated and undiluted urine samples. It was found that the developed competitive immunodevice was able to achieve wide linear range detection of wild-type p53 from 20 pM to 10 nM with a low detection limit of 14 pM in synthetic urine samples, suggesting the sensor's capability of working in a complex sample matrix. The excellent performance results also in terms of selectivity, trueness and precision, coupled with the advantages of an easy preparation and low-cost assay in contrast to other methods which require very complex, time-consuming and costly nanostructured architectures, makes the developed competitive immunosensor an analytically robust diagnostic tool, valuable for implementation of screening and follow-up programs in patients with urologic malignancies.