Sandwich-like electrochemiluminescence aptasensor based on dual quenching effect from hemin-graphene nanosheet and enzymatic biocatalytic precipitation for sensitive detection of carcinoembryonic antigen

Dual II-scheme nanosheet-like Bi2S3/Bi2O3/Ag2S heterostructures for ultrasensitive PEC aptasensing of aflatoxin B1 coupled with catalytic signal amplification by dendritic nanorod-like Au@Pd@Pt nanozyme

As one of the most toxic chemical substances, aflatoxin B1 (AFB1) has a strong carcinogenic effect even at a trace level in human and animal, which severely threatens human health and even causes cancers. Therefore, ultrasensitive detection of AFB1 is of significant importance. For such analysis, dual II-scheme sheet-like Bi₂S₃/Bi₂O₃/Ag₂S heterostructures were prepared by the in-situ growth method, which exhibited high separation efficiency for the electron-hole (e^--h⁺) pairs, prominent stability, and high photoactivity. Moreover, the dendritic nanorod-like Au@Pd@Pt (Au@Pd@Pt DNRs) nanozyme was homely synthesized, whose peroxidase-like activity was scrupulously investigated by catalytical oxidation of diaminobenzidine (DAB) in the presence of H₂O₂. Integration by the aptasensing strategy, a photoelectrochemical (PEC) "signal-on" aptasensor was prepared, which exhibited a broader linear range of 0.5 pg mL^-1-100 ng mL^-1 with a lower limit of detection (LOD = 0.09 pg mL^-1, S/N = 3). This work provides a feasible strategy to develop advanced PEC biosensors for actual analysis of environmental pollutants.

Ultrasensitive Electrochemiluminescence Immunoassay Based on Signal Amplification of 0D Au-2D WS2 Nano-Hybrid Materials

In this study, we proposed a novel Ru(bpy)₃²⁺-Au-WS₂ nanocomposite (Ru-Au-WS₂ NCs) nano-hybrid electrochemiluminescence (ECL) probe for the highly sensitive detection of carcinoembryonic antigen (CEA). This system utilizes Au nanoparticles (Au NPs) as a bridge to graft the high-performance of a Ru(bpy)₃²⁺ ECL emitter and WS₂ nanosheet with excellent electrochemical performance into an ECL platform, which shows outstanding anodic ECL performance and biosensing platform due to the synergetic effect and biocompatibility of Au NPs and WS₂ nanosheet. Because the ECL intensity of Ru(bpy)₃²⁺ is sensitively affected by the antibody-antigen insulator, a preferable linear dependence was obtained in the concentration range of CEA from 1 pg·mL^-1 to 350 ng·mL^-1 with high selectivity (LOD of 0.3 pg·mL^-1, S/N = 3). Moreover, the ECL platform had good reproducibility and stability and exhibited excellent anti-interference performance in the detection process of CEA. We believe that the platform we have developed can expand the opportunities for the detection of additional high specificity-related antibodies/antigens and demonstrate broad prospects for disease diagnosis and biochemical research.

Electrochemical aptasensors for cancer diagnosis in biological fluids - A review

The tunability of SELEX procedure is an essential feature to supply bioaffinity receptors (aptamers) almost on demand for analytical and therapeutic purposes. This longstanding ambition is, however, not straightforward. Non-invasive cancer diagnosis, so called liquid biopsy, requires collection of body fluids with minimal or no sample pretreatment. In those raw matrices, aptamers must recognize minute amounts of biomarkers that are not unique entities but large sets of variants evolving with the disease stage. The susceptibility of aptasensors to assay conditions has driven the selection of aptamers to natural environments to ensure their optimum performance in clinical samples. We present herein a compilation of the SELEX procedures in natural milieus. By revising the electrochemical aptasensors applied to clinical samples for cancer diagnosis and tracing back to the original SELEX we analyze whether aptamers raised using these SELEX strategies are being incorporated to the diagnostic devices and how aptasensors are finding their way to a market dominated by antibody-based assays.

Electrochemical sandwich aptasensor for the carcinoembryonic antigen using graphene quantum dots, gold nanoparticles and nitrogen doped graphene modified electrode and exploiting the peroxidase-mimicking activity of a G-quadruplex DNAzyme

A sandwich-type electrochemical aptasensor has been constructed and applied for sensitive and selective detection of the carcinoembryonic antigen (CEA). The surface of a glassy carbon electrode (GCE) was first modified with nitrogen-doped graphene and then gold nanoparticles and graphene quantum dots electrodeposited on it to obtain an architecture of type GQD/AuNP/NG/GCE. In the next step, the CEA-binding aptamer was immobilized on the modified GCE. Hemin intercalates in the amino-modified hemin aptamer to form a hemin-G-quadruplex (hemin-G4) DNAzyme. The amino modified CEA aptamer II is connected to hemin-G4 by glutaraldehyde (GA) as a linker to produce CEAaptamerII/GA/hemin-G4 (=ApII/GA/DNAzyme). Through a sandwich mode, the ApII/GA/DNAzyme bioconjugates are captured on the modified GCE. Subsequently, the hemin-G4 acts as peroxidase-mimicking DNAzyme and rapidly catalyzes the electroreduction of hydrogen peroxide. The quantitative determination of CEA was achieved by differential pulse voltammetry, best at a working potential of around -0.27 V vs. Ag/AgCl. Under optimized conditions, the assay has a linear response in the 10.0 fg mL^-1 to 200.0 ng mL^-1 CEA concentration range and a lower detection limit of 3.2 fg mL^-1. Graphical abstract Schematic presentation of a sandwich-type electrochemical aptasensor based on nitrogen doped graphene (NG), gold nanoparticles (AuNPs) and graphene quantum dots (GQDs) modified glassy carbon electrode, and the hemin-G4 DNAzyme for femtomolar detection of the carcinoembryonic antigen.

Photoelectrochemical biosensor for CEA detection based on SnS2-GR with multiple quenching effects of Au@CuS-GR

A novel signal on-off type photoelectrochemical (PEC) biosensing system was designed for sensitive detection of carcinoembryonic antigen (CEA) based on tin disulfide nanosheets loaded on reduced graphene cxide (SnS₂-GR) as the photoactive material and gold nanoparticles coated on reduced graphene oxide-functionalized copper sulfide (Au@CuS-GR) for signal amplification. It's the first time for SnS₂-GR was exploited as a sensing matrix. Here, the photocurrent signals of SnS₂ were amplified attributed to the sensitization effect of graphene. As signal amplifier, Au@CuS-GR could quench the photocurrents of SnS₂-GR not only through the p-n type semiconductor quenching effect as well as the steric hindrance effect, but also as peroxidase mimetics to catalyze the oxidation of 4-Chloro-1-naphthol (4-CN) to produce insoluble product on the electrode surface. Based on the multiple signal amplification ability of Au@CuS-GR, CEA was detected sensitively with a linear range from 0.1 pg mL^-1 to 10 ng mL^-1 and limit of detection down to 59.9 fg mL^-1 (S/N = 3). Meanwhile, the PEC biosensor displayed excellent performance in the assay of human serum sample, showing good application prospects for various target analysis.

Graphene-based aptasensors: from molecule-interface interactions to sensor design and biomedical diagnostics

Graphene-based nanomaterials have been widely utilized to fabricate various biosensors for environmental monitoring, food safety, and biomedical diagnostics. The combination of aptamers with graphene for creating biofunctional nanocomposites improved the sensitivity and selectivity of fabricated biosensors due to the unique molecular recognition and biocompatibility of aptamers. In this review, we highlight recent advances in the design, fabrication, and biomedical sensing application of graphene-based aptasensors within the last five years (2013-current). The typical studies on the biomedical fluorescence, colorimetric, electrochemical, electrochemiluminescence, photoelectrochemical, electronic, and force-based sensing of DNA, proteins, enzymes, small molecules, ions, and others are demonstrated and discussed in detail. More attention is paid to a few key points such as the conjugation of aptamers with graphene materials, the fabrication strategies of sensor architectures, and the importance of aptamers on improving the sensing performances. It is expected that this work will provide preliminary and useful guidance for readers to understand the fabrication of graphene-based biosensors and the corresponding sensing mechanisms in one way, and in another way will be helpful to develop novel high performance aptasensors for biological analysis and detection.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Patchy gold coated Fe3O4 nanospheres with enhanced catalytic activity applied for paper-based bipolar electrode-electrochemiluminescence aptasensors

In this work, novel multifunctional patchy gold coated Fe₃O₄ hybrid nanoparticles (PG-Fe₃O₄ NPs) have been successfully synthesized in aqueous medium via a facile adsorption-reduction method. A rational formation mechanism has been proposed by monitoring the morphological evolution. The PG-Fe₃O₄ NPs retained the good magnetic property and exhibited excellent catalytical effeciency towards the electrochemical reduction of hydrogen peroxide. Chronoamperometric and amperometric experiments indicated a relatively high catalytic rate constant of 3.13 × 10⁵ M^-1 s^-1, a high sensitivity of 578.87 µA mM^-1 cm^-2 and a low Michaelis-Menten constant of 462 µM. Meanwhile, the introduction of patchy gold could help biofunctionalization via Au-S bond for different biodetection and biosensing purposes. Here, as an example, thiol-terminated aptamers were immobilized onto the patchy gold part as a signal probe to detect carcinoembryonic antigen (CEA). A related paper-based bipolar electrode-electrochemiluminescence (pBPE-ECL) aptasensor was fabricated as the low-cost, disposable and miniature platform. To improve the sensitivity, Au nanodendrites were electrodeposited at the BPE cathode as the matrix for Apt1 immobilization. This aptasensor showed a wide linear range of 0.1 pg mL^-1-15 ng mL^-1 with a low detection limit of 0.03 pg mL^-1, remaining competitive against other ones, and also demonstrating the PG-Fe₃O₄ NPs have promising potential for catalysis and bioassays.

Ultrasensitive supersandwich-type biosensor for enzyme-free amplified microRNA detection based on N-doped graphene/Au nanoparticles and hemin/G-quadruplexes

A simple, enzyme-free supersandwich-type biosensor is fabricated for the ultrasensitive detection of microRNAs (miRNAs) using N-doped graphene/Au nanoparticles (NG-AuNPs) and hemin/G-quadruplexes. In the proposed strategy, AuNPs are deposited on the surface of a MoSe₂ modified electrode to immobilize the thiol-modified hairpin probe through the strong Au-S bond. When the target miRNA is added, capture DNA hybridizes with it and unfolds its stem-and-loop structure. The NG-AuNP hybrids are the main amplification element and are modified by hybridization with assistance DNA and the terminus of capture DNA, resulting in the formation of the supersandwich structure. The assistance DNA is embedded into the hemin/G-quadruplex complexes in the presence of hemin and K⁺ to provide an exceptional current signal for the detection of miRNAs. Under the optimized experimental conditions, a detection limit of 0.17 fM is obtained with a linear range of 10 fM-1 nM. In addition, the present biosensor shows outstanding selectivity towards mismatched miRNAs. This biosensor platform successfully realized the combination of the signal amplification technique with the supersandwich structure, providing a promising approach for the detection of miRNA-21 in practical applications.

A novel potentiometric immunoassay for carcinoma antigen 15-3 by coupling enzymatic biocatalytic precipitation with a nanogold labelling strategy

Methods based on potentiometric measurement have been developed for immunoassays, but most exhibit low sensitivities and are unsuitable for early diagnosis of disease.