Experimental design for the optimization of copper biosorption from aqueous solution by Aspergillus terreus

Copper biosorption by Bacillus pumilus OQ931870 and Bacillus subtilis OQ931871 isolated from Wadi Nakheil, Red Sea, Egypt

BACKGROUND

Despite being necessary, copper is a toxic heavy metal that, at high concentrations, harms the life system. The parameters that affect the bioreduction and biosorption of copper are highly copper-resistant bacteria.

RESULTS

In this work, the ability of the bacterial biomass, isolated from black shale, Wadi Nakheil, Red Sea, Egypt, for Cu2+ attachment, was investigated. Two Cu2+ resistance Bacillus species were isolated; Bacillus pumilus OQ931870 and Bacillus subtilis OQ931871. The most tolerant bacterial isolate to Cu2+ was B. pumilus. Different factors on Cu2+ biosorption were analyzed to estimate the maximum conditions for Cu biosorption. The qmax for Cu2+ by B. pumilus and B. subtilis determined from the Langmuir adsorption isotherm was 11.876 and 19.88 mg. g-1, respectively. According to r2, the biosorption equilibrium isotherms close-fitting with Langmuir and Freundlich model isotherm. Temkin isotherm fitted better to the equilibrium data of B. pumilus and B. subtilis adsorption. Additionally, the Dubinin-Radushkevich (D-R) isotherm suggested that adsorption mechanism of Cu2+ is predominately physisorption.

CONCLUSION

Therefore, the present work indicated that the biomass of two bacterial strains is an effective adsorbent for Cu2+ removal from aqueous solutions.

Bioremediation of copper using indigenous fungi Aspergillus species isolated from an abandoned copper mine soil

Bioremediation of mining soils using metal tolerant fungi is widely considered as a promising cost-effective and ecofriendly approach. This study assessed the copper removal efficiency and bioaccumulation ability of the indigenous species Aspergillus hiratsukae LF1 and Aspergillus terreus LF2 isolated from the soils of an abandoned copper mine in Oman. Nutrient medium containing five different Cu (II) levels (0 - control, 100, 200, 300 and 500 mg/L) was employed for assessing both parameters. The removal efficiency from nutrient medium (100-500 mg Cu per L) ranged from 57% to 21% for A. hiratsukae LF1, and from 69% to 24% for A. terreus LF2. A. hiratsukae LF1 and A. terreus LF2 accumulated a maximum of 4.63 and 5.95 mg Cu/g,espectively, at 500 mg/L of Cu (II) concentration. The compositional analysis of extracellular polymeric substances excreted by both species revealed a hormetic response by A. hiratsukae LF1 at 100 mg/L; whereas increasing media Cu levels induced carbohydrates production in A. terreus LF2. These results hint at the involvement of carbohydrates in the Cu-tolerance mechanism of the latter. Copper accumulation in both species was further demonstrated through scanning electron microscopy and energy dispersive spectrometry. In line with the pertaining literature, our results are somewhat inconclusive concerning whether proteins or carbohydrates play a more pivotal role in copper complexation in both species; yet, FTIR analysis showed the participation of different functional groups in Cu sorption. Overall, although additional research is required to advance the knowledge about both Aspergillus species, our findings suggest that A. terreus LF2 presents greater promise for copper bioremediation due to enhanced tolerance and accumulation capacity.

Magnetosome yield characteristics modeling of acidithiobacillus ferrooxidans in airlift bioreactor using response surface methodology

Bacterial magnetosomes had been proved to have great application potential in medicine and biotechnology. The objective of the present study was to obtain high yield of magnetosomes from Acidithiobacillus ferrooxidans (A. ferrooxidans) BYM in an airlift bioreactor using response surface methodology (RSM). The magnetosomes from A. ferrooxidans BYM were characterized using a transmission electron microscope and scanning electron microscopy. The maximum magnetosome yield of 0.4267 mg/L was achieved at ventilation capacity of 3.6 L/min and gluconic acid concentration of 10 mmol/L at 25^oC. The correlation coefficient (R²) value of 0.8676 of the obtained model suggested a good correlation between the actual and predicted magnetosome yield. The confirmation experiment confirmed that the actual magnetosome yield of 0.391 mg/L obtained were in agreement with the predicted value of 0.398 mg/L. These results suggested that RSM can be employed to find out the optimum conditions for magnetosome formation in airlift bioreactor.

Cu(II) biosorption by living biofilms: Isothermal, chemical, physical and biological evaluation

Dissolved copper in stormwater runoff is a significant environmental problem. Biosorption of dissolved metals using microorganisms is known as a green, low-cost and efficient method. However, the role of live biological agents in the remediation of dissolved copper in Sustainable Drainage (SuDS) has not been reported. In this study, the effect of pH, initial concentration and temperature, on bacteria in different stages of biofilm development on a geotextile, along with Cu(II) removal efficiencies, were evaluated. Maximum Cu(II) removal efficiency (92%) was observed at pH 6. By decreasing the pH from 6 to 2, a log 5 reduction in bacteria was observed and Carboxyl groups transformed from -COO^- to -COOH. The maximum biosorption capacity (119 mg g^-1) was detected on day 1 of biofilm development, however, maximum removal efficiency (97%) was measured on day 21 of biofilm incubation. Exteracellular Polymeric Substance (EPS) showed a better protection of CFUs in more mature biofilms (day 21) with less than 0.1 log decrease when exposed to 200 mL^-1 Cu(II), whereas, biofilm on day 1 of incubation showed a 2 log reduction in CFUs number. Thermodynamic studies showed that the maximum Cu(II) biosorption capacity of biofilms, incubated for 7 days (117 mg g^-1) occurred at 35 °C. Thermodynamic and kinetic modelling of data revealed that a physical, feasible, spontaneous and exothermic process controlled the biosorption, with a diffusion process observed in external layers of the biofilm, fitting a pseudo-second order model. Equilibrium data modelling and high R² values of Langmuir model indicated that the biosorption took place by a monolayer on the living biofilm surface in all stages of biofilm development.

Recent Advances in Biosorption of Copper and Cobalt by Filamentous Fungi

Copper (Cu) and Cobalt (Co) are among the most toxic heavy metals from mining and other industrial activities. Both are known to pose serious environmental concerns, particularly to water resources, if not properly treated. In recent years several filamentous fungal strains have been isolated, identified and assessed for their heavy metal biosorption capacity for potential application in bioremediation of Cu and Co wastes. Despite the growing interest in heavy metal removal by filamentous fungi, their exploitation faces numerous challenges such as finding suitable candidates for biosorption. Based on current findings, various strains of filamentous fungi have high metal uptake capacity, particularly for Cu and Co. Several works indicate that Trichoderma, Penicillium, and Aspergillus species have higher Cu and Co biosorption capacity compared to other fungal species such as Geotrichum, Monilia, and Fusarium. It is believed that far more fungal species with even higher biosorption capability are yet to be isolated. Furthermore, the application of filamentous fungi for bioremediation is considered environmentally friendly, highly effective, reliable, and affordable, due to their low technology pre-requisites. In this review, we highlight the capacity of various identified filamentous fungal isolates for biosorption of copper and cobalt from various environments, as well as their future prospects.

Adsorption of indium by waste biomass of brown alga Ascophyllum nodosum

The biosorption capacities of dried meal and a waste product from the processing for biostimulant extract of Ascophyllum nodosum were evaluated as candidates for low-cost, effective biomaterials for the recovery of indium(III). The use of indium has significantly grown in the last decade, because of its utilization in hi-tech. Two formats were evaluated as biosorbents: waste-biomass, a residue derived from the alkaline extraction of a commercial, biostimulant product, and natural-biomass which was harvested, dried and milled as a commercial, "kelp meal" product. Two systems have been evaluated: ideal system with indium only, and double metal-system with indium and iron, where two different levels of iron were investigated. For both systems, the indium biosorption by the brown algal biomass was found to be pH-dependent, with an optimum at pH3. In the ideal system, indium adsorption was higher (maximum adsorptions of 48 mg/g for the processed, waste biomass and 63 mg/g for the natural biomass), than in the double metal-system where the maximum adsorption was with iron at 0.07 g/L. Good values of indium adsorption were demonstrated in both the ideal and double systems: there was competition between the iron and indium ions for the binding sites available in the A. nodosum-derived materials. Data suggested that the processed, waste biomass of the algae, could be a good biosorbent for its indium absorption properties. This had the double advantages of both recovery of indium (high economic importance), and also definition of a virtuous circular economic innovative strategy, whereby a waste becomes a valuable resource.

Nanostructured mesoporous silica: influence of the preparation conditions on the physical-surface properties for efficient organic dye uptake

A series of ordered mesoporous silica such as MCM-41, SBA-3 and SBA-15, in addition to silica micro- (SM) and nano- (SN) mesoporous particles, were prepared. The preparation conditions were found to greatly influence the physical-surface properties including morphological structure, porosity, particle size, aggregate average size, surface area, pore size, pore volume and zeta potential of the prepared silica, while the chemical structure, predicted from FT-IR spectra, and the diffraction patterns, predicted from wide-angle X-ray diffraction spectra, were identical. Surface areas of approximately 1500, 1027, 600, 552 and 317 m² g^-1, pore volumes of 0.93, 0.56, 0.82, 0.72 and 0.5 cm³ g^-1, radii of 2.48, 2.2, 5.66, 6.6 and 8.98 nm, average aggregate sizes of 56, 65.4, 220.9, 73, 61.1 and 261 nm and zeta potential values of -32.8, -46.1, -26.3, -31.4 and -25.9 mV were obtained for MCM-41, SBA-3, SBA-15, SN and SM, respectively. Methylene blue dye uptake capacity of the prepared silica types was investigated using the batch technique and, in addition, the most effective material was further studied by the column flow system. The kinetics and isotherms of the uptake process were studied. The morphological structure, surface area, pore radius and zeta potential values were the most correlated factors.

Sorption of copper onto low molecular weight chitosan derivative from aqueous solution

In this study, sorption of copper onto low molecular weight chitosan derivative was studied. Experimental parameters such as pH of the solution (A), temperature (B), dose of the sorbent (C), and concentration of solution (D) were considered. The statistical results indicated that the dose of sorbent (C) and Cu (II) concentration (D) influenced removal efficiency at 5% significance level. Also, some interactions such as ABCD, ACD, ABC and AC affected the removal process. The sorbent was characterized with FTIR, SEM and TG/DSC. Freundlich isotherm model was the best isotherm model. The kinetic study results correlated well with the pseudo-second-order model. The thermodynamic studies revealed that the nature of copper sorption was spontaneous and endothermic. Strong affinity of the sorbent for copper (II) was revealed by the Isothermal Titration Calorimetry (ITC) technique.

Optimization of the condition for adsorption of gallic acid by Aspergillus oryzae mycelia using Box-Behnken design

Fresh biomass of Aspergillus oryzae (A. oryzae) CGMCC5992 can effectively remove gallic acid from aqueous solution. To improve the removal rate of gallic acid, this study first identified the important factors affecting the removal rate of gallic acid with univariate analysis, and then used four-factor and three-level Box-Behnken design (BBD) with the removal rate of gallic acid as response value, to obtain the optimum conditions for the removal of gallic acid as follows: 6.95 h treatment time, pH 3.70, 7.07 g/L mycelium volume, and 120.64 mg/L initial concentration of gallic acid. Under such optimized condition, the removal rate of gallic acid approached 99.21 %. HPLC-MS analysis proved that the gallic acid in aqueous solution was completely removed by A. oryzae, rather than being metabolized into its derivatives. Scanning electron microscopy (SEM) indicated that the biomass morphology and surface structure of A. oryzae changed after the adsorption of gallic acid. Thus, the present study has provided an optimal condition for A. oryzae removal of gallic acid in water.

Preparation and characterization of chitosan/silver nanoparticle/copper nanoparticle/carbon nanotube multifunctional nano-composite for water treatment: heavy metals removal; kinetics, isotherms and competitive studies

A chitosan/Ag NP/Cu NP/CNT multifunctional composite has superior water treatment efficiency compared with bare chitosan and bi-composite systems.

Microfungi in highly copper-contaminated soils from an abandoned Fe-Cu sulphide mine: growth responses, tolerance and bioaccumulation

Copper is one of the most dangerous soil contaminants. Soils affected by high copper concentrations show low biodiversity and, above all, inadequate environmental quality. Microorganisms such as fungi can play a key role in metal-polluted ecosystems via colonization and decontamination. The study is devoted to characterize the microfungal community in highly Cu-contaminated bare soil from derelict Fe-Cu sulphide mines and to isolate microfungal strains able to tolerate and accumulate Cu. 11 Different taxa to be isolated has been isolated during two sampling campaigns (in Autumn and in Spring). Among these, Clonostachys rosea, Trichoderma harzianum, and Aspergillus alliaceus were tested at increasing Cu(II) concentrations and showed a Cu(II)-tolerance capability ranging from 100 to 400 mg L(-1). Moreover, the strains of T. harzianum and C. rosea presented a high Cu(II)-bioaccumulation capability, 19628 and 22,222 mg kg(-1), respectively. These microfungi may be fruitfully exploited in mycoremediation protocols.

Preparation of chitosan/poly(acrylic acid) magnetic composite microspheres and applications in the removal of copper(II) ions from aqueous solutions

In this current work, the magnetic composite microspheres (MCM), consisting of Fe(3)O(4) nanoparticles and poly(acrylic acid) (PAA) blended chitosan (CS), were prepared successfully by a simple method, co-precipitation of the compounds in alkaline solution. SEM, FTIR and TG techniques have been applied to investigate the structures of the MCM materials. The vibrating-sample magnetometer (VSM) measurement illustrated a paramagnetic property as well as a fast magnetic response, which indicated the significant separability of the MCM in the aqueous suspensions. Then, the MCM materials were employed as absorbents for removal of copper(II) (Cu(II)) ions from aqueous solutions. The fundamental adsorption behaviors of MCM were studied also. Experimental results revealed that the CS/PAA-MCM had greater adsorption capacity than CS-MCM, and PAA played an important role for the adsorption of Cu(II) ions. Moreover, the adsorption isotherms were all well described by the Langmuir model, while the adsorption kinetics followed the pseudo-second order equation. Furthermore, the adsorbent could be easily regenerated at lower pH and reused almost without any loss of adsorption capacity. On the contrary, the Cu(II) ions loaded CS-MCM and CS/PAA-MCM were stable enough at pH higher than 4.0, and both exhibited efficient phosphate removal with maximal uptakes around 63.0 and 108.0 mg Pg(-1), respectively.