Comparison of zero-valent iron and iron oxide nanoparticle stabilized alkyl polyglucoside phosphate foams for remediation of diesel-contaminated soils

Impact mechanisms of various surfactants on the biodegradation of phenanthrene in soil: Bioavailability and microbial community responses

The present study was conducted to systematically explore the mechanisms underlying the impact of various surfactants (CTAB, SDBS, Tween 80 and rhamnolipid) at different doses (10, 100 and 1000 mg/kg) on the biodegradation of a model polycyclic aromatic hydrocarbon (PAH) by indigenous soil microorganisms, focusing on bioavailability and community responses. The cationic surfactant CTAB inhibited the biodegradation of phenanthrene within the whole tested dosage range by decreasing its bioavailability and adversely affecting soil microbial communities. Appropriate doses of SDBS (1000 mg/kg), Tween 80 (100, 1000 mg/kg) and rhamnolipid at all amendment levels promoted the transformation of phenanthrene from the very slow desorption fraction (Fvslow) to bioavailable fractions (rapid and slow desorption fractions, Frapid and Fslow), assessed via Tenax extraction. However, only Tween 80 and rhamnolipid at these doses significantly improved both the rates and extents of phenanthrene biodegradation by 22.1-204.3 and 38.4-76.7 %, respectively, while 1000 mg/kg SDBS had little effect on phenanthrene removal. This was because the inhibitory effects of anionic surfactant SDBS, especially at high doses, on the abundance, diversity and activity of soil microbial communities surpassed the bioavailability enhancement in dominating biodegradation. In contrast, the nonionic surfactant Tween 80 and biosurfactant rhamnolipid enhanced the bioavailability of phenanthrene for degradation and also that to specific degrading bacterial genera, which stimulated their growth and increased the abundance of the related nidA degradation gene. Moreover, they promoted the total microbial/bacterial biomass, community diversity and polyphenol oxidase activity by providing available substrates and nutrients. These findings contribute to the design of suitable surfactant types and dosages for mitigating the environmental risk of PAHs and simultaneously benefiting microbial ecology in soil through bioremediation.

Surfactant foam injection for remediation of diesel-contaminated soil: A comprehensive study on the role of co-surfactant in foaming formulation enhancement

Aqueous foam injection is a promising technique for in-situ remediation of soil and aquifers contaminated by petroleum products. However, the application efficiency is strongly hindered by foam's instability upon contact with hydrocarbons. Addressing this, we propose a new binary surfactant mixture of Sodium Dodecyl Sulfate (SDS) and Cocamidopropyl Hydroxysultaine (CAHS). This study investigates CAHS's role as a co-surfactant in enhancing foam stability against antifoaming diesel oil under static and dynamic conditions. Using a dynamic foam analyzer (DFA-100), we assessed static foam's stability by monitoring decay profiles and bubble growth over time. The results revealed that the highest stability can be reached at a CAHS to SDS ratio of 50:50, increasing the half-life of the foam by 7.7 times. Remarkably, our analyses at bulk and bubble scales also elucidated the mechanisms behind the enhanced foam stability of the proposed binary surfactant mixture in the absence and presence of diesel. Additionally, in a 1D sand column, the SDS-CAHS mixture demonstrated more than twofold improvement of the Resistance Factor, attributed to the better survival of the lamellae due to the reduced rate of their destruction. This formulation also yielded a recovery improvement of >10 % compared to SDS foam. The significant improvements in stability and performance of the SDS-CAHS (50:50) mixture were credited to a robust pseudo-emulsion film formation, creating a higher oil entry barrier. This reinforcement and the surfactant molecules' synergistic interactions at the gas-liquid-oil interface significantly contributed to the overall effectiveness.

A narrative review of the synthesis, characterization, and applications of iron oxide nanoparticles

The significance of green synthesized nanomaterials with a uniform shape, reduced sizes, superior mechanical capabilities, phase microstructure, magnetic behavior, and superior performance cannot be overemphasized. Iron oxide nanoparticles (IONPs) are found within the size range of 1-100 nm in nanomaterials and have a diverse range of applications in fields such as biomedicine, wastewater purification, and environmental remediation. Nevertheless, the understanding of their fundamental material composition, chemical reactions, toxicological properties, and research methodologies is constrained and extensively elucidated during their practical implementation. The importance of producing IONPs using advanced nanofabrication techniques that exhibit strong potential for disease therapy, microbial pathogen control, and elimination of cancer cells is underscored by the adoption of the green synthesis approach. These IONPs can serve as viable alternatives for soil remediation and the elimination of environmental contaminants. Therefore, this paper presents a comprehensive analysis of the research conducted on different types of IONPs and IONP composite-based materials. It examines the synthesis methods and characterization techniques employed in these studies and also addresses the obstacles encountered in prior investigations with comparable objectives. A green engineering strategy was proposed for the synthesis, characterization, and application of IONPs and their composites with reduced environmental impact. Additionally, the influence of their phase structure, magnetic properties, biocompatibility, toxicity, milling time, nanoparticle size, and shape was also discussed. The study proposes the use of biological and physicochemical methods as a more viable alternative nanofabrication strategy that can mitigate the limitations imposed by the conventional methods of IONP synthesis.

Iron oxide nanoparticles in the soil environment: Adsorption, transformation, and environmental risk

Iron oxide nanoparticles (IONPs) have great application potential due to their multifunctional excellence properties, leading to the possibility of their release into soil environments. IONPs exhibit different adsorption properties toward environmental pollutants (e.g., heavy metals and organic compounds), thus the adsorption performance for various contaminants and the molecular interactions at the IONPs-pollutants interface are discussed. After solute adsorption, the change in the environmental behavior of IONPs is an important transformation process in the natural environments. The aggregation, aging process, and chemical/biological transformation of IONPs can be altered by soil solution chemistry, as well as by the presence of dissolved organic matter and microorganisms. Upon exposure to soil environments, IONPs have both positive and negative impacts on soil organisms (e.g., bacteria, plants, nematodes, and earthworms). Moreover, we compared the toxicity of IONPs alone to combined toxicity with environmental pollutants and pristine IONPs to aged IONPs, and the mechanisms of IONPs toxicity at the cellular level are also reviewed. Given the unanswered questions, future research should include prediction and design of IONPs, new characterization technology for monitoring IONPs transformation in soil ecosystems, and further refinement the environmental risk assessment of IONPs. This review will greatly enhance our knowledge of the performance and impact of IONPs in soil systems.

Study of a light hydrocarbon fraction spill migration that occurred in an area of the Mexican southeast using computational fluid dynamics

The present work aimed to study, predict and understand benzene migration that occurred during an industrial spill using numerical simulation by computational fluid dynamics. Advection, diffusion and adsorption were the main mechanisms considered that governed the spill incident. The incident occurred due to a fracture under a fuel oil storage tank. The tank was located on a hill 18 m high, and the initial value of benzene concentration (soil saturation) was 60 ppm. When the spill was discovered, samples in the affected zone were taken using an experimental design. Many samples showed a greater concentration of benzene than allowed by Mexican Official Standards (MOSs) (15 ppm). The concentrations found 100 m away from the spill were around 60 to 15 ppm. Due to the spill being under the tank, it was difficult to discover. The numerical simulation provided an estimate that the spill started around 2 years ago. The type of soil in the afflicted zone is rocky, and, consequently, it is difficult to estimate how long it will take to reach the concentration allowed by the MOSs, but the numerical simulation predicts that this concentration will be reached in 14 years. Experimental values of the spill contaminant concentration were statistically similar to the CFD estimated data (p < 0.05).

Applications of functional nanoparticle-stabilized surfactant foam in petroleum-contaminated soil remediation

Surfactant foam (SF) can be used to remediate petroleum-contaminated soil because of its easy transfer to inhomogeneous and low-permeability formations. Nanoparticles (NPs) not only stabilize SF under extreme conditions but also impart various functions, aiding the removal of petroleum contaminants. This review discusses the stabilization mechanisms of nanoparticle-stabilized SF (NP-SF) as well as the effects of NP size, chargeability, wettability, and NP-to-surfactant ratio on foam stability. SF stabilized by inert SiO₂ NPs is most commonly used to remediate soil contaminated with crude oil and diesel. Low dose of SF stabilized by nano zero-valent iron is cost-effective for treating soil contaminated with chlorinated organics and heavy metal ions. The efficiency and recyclability of Al₂O₃/Fe₃O₄ NPs in the remediation of diesel and crude oil contamination could be enhanced by applying a magnetic field. This review provides a theoretical basis and practical guidelines for developing functional NP-SF to improve the remediation of petroleum-contaminated soils. Future research should focus on the structural design of photocatalytic NPs and the application of catalytic NP-SF in soil remediation.

An Overview on the Treatment of Oil Pollutants in Soil Using Synthetic and Biological Surfactant Foam and Nanoparticles

Oil-contaminated soil is one of the most concerning problems due to its potential damage to human, animals, and the environment. Nanoparticles have effectively been used to degrade oil pollution in soil in the lab and in the field for a long time. In recent years, surfactant foam and nanoparticles have shown high removal of oil pollutants from contaminated soil. This review provides an overview on the remediation of oil pollutants in soil using nanoparticles, surfactant foams, and nanoparticle-stabilized surfactant foams. In particular, the fate and transport of oil compounds in the soil, the interaction of nanoparticles and surfactant foam, the removal mechanisms of nanoparticles and various surfactant foams, the effect of some factors (e.g., soil characteristics and amount, nanoparticle properties, surfactant concentration) on remediation efficiency, and some advantages and disadvantages of these methods are evaluated. Different nanoparticles and surfactant foam can be effectively utilized for treating oil compounds in contaminated soil. The treatment efficiency is dependent on many factors. Thus, optimizing these factors in each scenario is required to achieve a high remediation rate while not causing negative effects on humans, animals, and the environment. In the future, more research on the soil types, operating cost, posttreatment process, and recycling and reuse of surfactants and nanoparticles need to be conducted.

Assessment of bimetallic Zn/Fe0 nanoparticles stabilized Tween-80 and rhamnolipid foams for the remediation of diesel contaminated clay soil

Diesel contamination of soil due to oil spills, disposal of refinery waste, oil exploration constitutes a major environmental problem. This paper reports the remediation of diesel contaminated clay soil using Zn/Fe⁰ bimetallic nanoparticle stabilized Rhamnolipid (RMLP) and Tween-80 (TW-80) surfactant foams. Fe⁰, and Zn (x wt%)/Fe⁰ (x = 0.2, 2.0, and 10.0) bimetallic nanoparticles are synthesized by using sodium borohydride reduction method. The average particle size (from FESEM) is calculated to be 62, 57, 42 and 35 nm for the Fe⁰, Zn (0.2)/Fe⁰, Zn (2)/Fe⁰ and Zn (10)/Fe⁰ nanopowders, respectively. The highest foamability and foam stability of 109.6 and 108.5 mL, respectively are observed for the RMLP (12 mg/l) surfactant foam stabilized with 6 mg/l Zn (10)/Fe⁰ nanoparticles. The surface tension values reduce to the lowest value of 28.1 and 31.4 mN/m with the addition of 6 mg/l of Zn (10)/Fe⁰ powder in RMLP and TW-80 solutions of 12 mg/l, respectively. The maximum diesel removal efficiency of 83.8 and 59%, is achieved by RMLP (12 mg/l) foam stabilized by Zn (10)/Fe⁰ nanoparticles (6 mg/l) for the clay soil contaminated with 100 and 500 μl/g of diesel, respectively. The physicochemical properties of the nanoparticles are studied to explain the foam properties and the remediation behavior. These findings regarding the nanoparticle stabilized foams can offer a cost-effective environment friendly commercial solution for soil remediation in the future.

Utilization of a biosurfactant foam/nanoparticle mixture for treatment of oil pollutants in soil

Oil contamination has become a primary environmental concern due to increased exploration, production, and use. When oil enters the soil, it may attach or adsorb to soil particles and stay in the soil for an extended period, contaminating the soil and surrounding areas. Nanoparticles have been widely used for the treatment of organic pollutants in the soil. Surfactant foam has effectively been employed to remediate various soil contaminants or recover oil compounds. In this research, a mixture of biosurfactant foam/nanoparticle was utilized for remediation of oil-contaminated soil. The results demonstrated that the biosurfactant/nanoparticle mixture and nitrogen gas formed high-quality and stable foams. The foam stability depended on the foam quality, biosurfactant concentration, and nanoparticle dosage. The pressure gradient change in the soil column relied on the flowrate (N₂ gas + surfactant/nanoparticle mixture), foam quality, and biosurfactant concentration. The optimal conditions to obtain good quality and stable foams and high oil removal efficiency involved 1 vol% rhamnolipid, 1 wt% nanoparticle, and 1 mL/min flowrate. Biosurfactant foam/nanoparticle mixture was effectively used to remediate oil-contaminated soil, whereas the highest treatment efficiency was 67%, 59%, and 52% for rhamnolipid biosurfactant foam/nanoparticle, rhamnolipid biosurfactant/nanoparticle, and only rhamnolipid biosurfactant, respectively. The oil removal productivity decreased with the increase of flowrate due to the shorter contact time between the foam mixture and oil droplets. The breakthrough curves of oil pollutants in the soil column also suggested that the foam mixture's maximum oil treatment efficiency was higher than biosurfactant/nanoparticle suspension and only biosurfactant.

Remediation of Pb-diesel fuel co-contaminated soil using nano/bio process: subsequent use of nanoscale zero-valent iron and bioremediation approaches

The effectiveness of the nano/bio process was investigated as a remediation option for co-contaminated soils. Nano/bio process is a hybrid treatment method that may be defined as the use of nanoscale zero-valent iron (nZVI) and bioremediation approaches subsequently/concurrently. Different bioremediation approaches (bioattenuation, biostimulation, and/or bioaugmentation) were performed together with nZVI application to remediate Pb- and diesel fuel-spiked soils. Nutrient (N and P) and activated sludge amendment were made to realize biostimulation and bioaugmentation, respectively. The nZVI application decreased the total percentage of the most mobile and bioavailable soil Pb fractions (exchangeable and carbonate-bound) from 68.3 to 31.7%. The biodegradation levels of nZVI-applied co-contaminated soils were significantly higher than the soils without nZVI indicating the positive effect of the reduced mobility, bioavailability, and toxicity of Pb content. The use of nano/biostimulation or nano/bioaugmentation treatments resulted in higher than 60% total n-alkane degradation, whereas 89.5% degradation was obtained by using nano/biostimulation + bioaugmentation. Hydrocarbon-degrader strains belonging to phyla Actinobacteria, Proteobacteria, or Firmicutes were identified from samples subjected to nano/bio process and the strains from biostimulation and bioaugmentation treatments were different. These results indicate that the stress on the microbial population caused by the co-contamination might be subsided and the biodegradation of alkanes might be improved by using the nano/bio process.

Guidelines for surfactant selection to treat petroleum hydrocarbon-contaminated soils

The present study determined the most effective surfactants to remediate gasoline and diesel-contaminated soil integrating information from soil texture and soil organic matter. Different ranges for aliphatic and aromatic hydrocarbons (> C6-C8, > C8-C10, > C10-C12, > C12-C16, > C16-C21, and > C21-C35) in gasoline and diesel fuel were analyzed. This type of analysis has been investigated infrequently. Three types of soils (silty clay, silt loam, and loamy sand) and four surfactants (non-ionic: Brij 35 and Tween 80; anionic: SDBS and SDS) were used. The results indicated that the largest hydrocarbon desorption was 56% for silty clay soil (SDS), 59% for silt loam soil (SDBS), and 69% for loamy sand soil (SDS). Soils with large amounts of small particles showed the worst desorption efficiencies. Anionic surfactants removed more hydrocarbons than non-ionic surfactants. It was notable that preferential desorption on different hydrocarbon ranges was observed since aliphatic hydrocarbons and large ranges were the most recalcitrant compounds of gasoline and diesel fuel components. Unlike soil texture, natural organic matter concentration caused minor changes in the hydrocarbon removal rates. Based on these results, this study might be useful as a tool to select the most cost-effective surfactant knowing the soil texture and the size and chemical structure of the hydrocarbons present in a contaminated site.

Optimum conditions of zero-valent iron nanoparticle stabilized foam application for diesel-contaminated soil remediation involving three major soil types

Stability of foam, enhanced by nano zero-valent iron (nZVI) and its optimized constituents, may have significant potential for effective treatment of soil contaminated with diesel oil-a major environmental problem. The optimum diesel removal efficiency from distinct types of soil accomplished by the unique application of such foams as well as the optimum conditions of the foaming constituents have not been reported in literature so far. Hence, in this work, the removal of diesel contaminant from different soil types (desert, coastal, clay soil) is optimized, and the optimized results are reported for the first time, using response surface methodology (RSM), for alkylpolyglucoside phosphate (APG-Ph) foam, stabilized by nZVI. The effect of concentrations of APG-Ph (0.02, 0.04, 0.06, 0.08, and 0.1 volume %) and nZVI (2, 3, and 3.5 mg/l) on diesel removal efficacy from soil is studied using Box-Behnken design (BBD) of response surface methodology (RSM). Maximum diesel removal efficiency obtained at a concentration of 0.1 volume % APG-Ph foam with 3.5 mg/l nZVI for desert, coastal, and clay soil is 94.6, 95.3, and 57.5%, respectively. The optimum concentrations of APG-Ph and nZVI are found to be 0.98 volume % and 0.8 mg/l, respectively. Validation of this optimal condition experimentally results in highest removal efficiency of 98.3, 97.2, and 75.9% for desert, coastal, and clay soil respectively. This is in good agreement with the predicted values by RSM (98.67, 97.57, and 76.85%). The maximum diesel removal efficiency predicted at optimal concentration of APG-Ph and nZVI is significantly larger than the results reported in literature in last three years.

Surfactant-enhanced remediation of oil-contaminated soil and groundwater: A review

Oil leakage, which is inevitable in the process of extraction, processing, transportation and storage, seriously undermines the soil and groundwater environment. Surfactants can facilitate the migration and solution of oil contaminants from nonaqueous phase liquid (NAPL) or solid phase to water by reducing the (air/water) surface tension, (oil/water) interfacial tension and micellar solubilization. They can effectively enhance the hydrodynamic driven remediation technologies by improving the contact efficiency of contaminants and liquid remediation agents or microorganism, and have been widely used to enhance the remediation of oil-contaminated sites. This paper summarizes the characteristics of different types of surfactants such as nonionic, anionic, biological and mixed surfactants, their enhancements to the remediation of oil-contaminated soil and groundwater, and examines the factors influencing surfactant performance. The causes of tailing and rebound effects and the role of surfactants in suppressing them are also discussed. Laboratory researches and actual site remediation practices have shown that various types of surfactants offer diverse options. Biosurfactants and mixed surfactants are superior and worth attention among the surfactants. Using surfactant foams, adding shear-thinning polymers, and combining surfactants with in-situ chemical oxidation are effective ways to resolve tailing and rebound effects. The adsorption of surfactants on soils and aquifer sediments decreases remediation efficiency and may cause secondary pollution, Therefore the adsorption loss should be noticed and minimized.

Remediation of diesel-contaminated soil enhanced with firefighting foam application

During rescue operations related to the elimination of the effects of industrial accidents or natural disasters, extinguishing agents are used that affect the migration and transformation of contamination in the environment. Firefighting foam sprayed onto an oil spill slowly drains to an aqueous solution and penetrates the soil. The role of surfactants in the removal of petroleum derivatives is well known, but such extinguishing agents also contain solvents, preservatives, corrosion inhibitors and other ingredients that can reduce the beneficial effect of surfactants on soil remediation. The article presents the results of research on the remediation of soil contaminated with diesel fuel and enhanced with firefighting agents used to extinguish fires or remove oil spills on the road. The obtained results of biodegradation and leaching studies indicate differences in the efficiency of diesel fuel removal from soils. It was also found that Wet 1% reduces the amount of polycyclic aromatic hydrocarbons (PAHs) in the soil compared to oily samples not wetted with extinguishing solutions. Chromatographic analyses have shown both the hydrocarbons degradation and the possibility of their transformation into more hazardous compounds. The effectiveness of soil remediation depends on the chemical composition of the extinguishing agent used on the contaminated soil.

Effective exploitation of anionic, nonionic, and nanoparticle-stabilized surfactant foams for petroleum hydrocarbon contaminated soil remediation

Contaminated environments posed serious threats to the ecosystems and their living beings. Suitable preventive approaches should be adopted for effective remediation of contaminated environments to remove or lower their health and environmentally-related hazardous aspects. Petroleum or traces of petroleum contamination from oil fields and refineries to exposed soil in the form of gasoline, petrol, diesel, and used motor oil are a rich source of potential damage to the environment. Conventional ways of treatment and management of hydrocarbon are complicated, insufficient, and expensive. Herein, we reviewed a smart approach for the removal of petroleum source contamination from exposed soil using environment-friendly chemical surfactants and nanoscale surfactant system. The host/guest complexes formation of surfactants with the hydrocarbons (hydrophobic contaminants) of soil and water by the encapsulation mechanism of hydrophobes into the (micelles) a self-assembly aggregation of surfactants. Recently, surfactants stabilized by nanoparticles (NPs) acquired more importance and popularity over surfactant alone. The persistence of diverse hydrocarbon-based contaminants and the mechanisms of removal using pristine surfactants or NP-stabilized surfactant foams are discussed with suitable examples. In summary, herein, an effort has been made to present the notable potentialities of pristine surfactants and NP-stabilized surfactant foams to remediate the petroleum hydrocarbon contaminated soil for a greener and sustainable ecosystem.