Enhancement of mariculture wastewater treatment using moving bed biofilm reactors filled with modified biocarriers: Characterisation, process performance and microbial community evaluation

A review on the application of biochar as an innovative and sustainable biocarrier material in moving bed biofilm reactors for dye removal from environmental matrices

Dye decolorization through biological treatment techniques has been gaining momentum as it is based on suspended and attached growth biomass in both batch and continuous modes. Hence, this review focused on the contribution of moving bed biofilm reactors (MBBR) in dye removal. MBBR have been demonstrated to be an excellent technology for pollution extraction, load shock resistance, and equipment size and energy consumption reduction. The review went further to highlight different biocarrier materials for biofilm development this review identified biochar as an innovative and environmentally friendly material produced through the application of different kinds of reusable or recyclable wastes and biowastes. Biochar as a carbonized waste biomass could be a better competitor and environmentally friendly substitute to activated carbon given its lower mass costs. Biochar can be easily produced particularly in rural locations where there is an abundance of biomass-based trash. Given that circular bioeconomy lowers dependency on natural resources by turning organic wastes into an array of useful products, biochar empowers the creation of competitive goods. Thus, biochar was identified as a novel, cost-effective, and long-term management strategy since it brings about several essential benefits, including food security, climate change mitigation, biodiversity preservation, and sustainability improvement. This review concludes that integrating two treatment methods could greatly lead to better color, organic matter, and nutrients removal than a single biological MBBR treatment process.

A review of microbial nitrogen transformations and microbiome engineering for biological nitrogen removal under salinity stress

The osmotic stress caused by salinity exerts severe inhibition on the process of biological nitrogen removal (BNR), leading to the deterioration of biosystems and the discharge of nitrogen with saline wastewater. Feasible strategies to solve the bottleneck in saline wastewater treatment have attracted great attention, but relevant studies to improve nitrogen transformations and enhance the salt-tolerance of biosystems in terms of microbiome engineering have not been systematically reviewed and discussed. This work attempted to provide a more comprehensive explanation of both BNR and microbiome engineering approaches for saline wastewater treatment. The effect of salinity on conventional BNR pathways, nitrification-denitrification and anammox, was summarized at cellular and metabolic levels, including the nitrogen metabolic pathways, the functional microorganisms, and the inhibition threshold of salinity. Promising nitrogen transformations, such as heterotrophic nitrification-aerobic denitrification, ammonium assimilation and the coupling of conventional pathways, were introduced and compared based on advantages and challenges in detail. Strategies to improve the salt tolerance of biosystems were proposed and evaluated from the perspective of microbiome engineering. Finally, prospects of future investigation and applications on halophilic microbiomes in saline wastewater treatment were discussed.

Enhanced aquaculture wastewater treatment in a biofilm reactor filled with sponge/ferrous oxalate/biochar composite (Sponge-C2FeO4@NBC) biocarriers: Performance and mechanism

Fabricating low-cost and efficient biofilm carriers for moving bed biofilm reactors in wastewater treatment is crucial for achieving environmental sustainability. Herein, a novel sponge biocarrier doped with NaOH-loaded biochar and nano ferrous oxalate (sponge-C₂FeO₄@NBC) was prepared and evaluated for nitrogenous compounds removal from recirculating aquaculture systems (RAS) wastewater by stepwise increasing ammonium nitrogen (NH₄⁺-N) loading rates. The prepared NBC, sponge-C₂FeO₄@NBC, and matured biofilms were characterized using SEM, FTIR, BET, and N₂ adsorption-desorption techniques. The results reveal that the highest removal rates of NH₄⁺-N reached 99.28 ± 1.3% was yielded by the bioreactor filled with sponge-C₂FeO₄@NBC, with no obvious nitrite (NO₂^--N) accumulation in the final phase. The reactor packed with sponge-C₂FeO₄@NBC biocarrier had the highest relative abundance of functional microorganisms responsible for nitrogen metabolism than in the control reactor, confirmed from 16S rRNA gene sequencing analysis. Our study provides new insights into the newly developed biocarriers for enhancing RAS biofilters treatment performance in keeping water quality within the acceptable level for the rearing of aquatic species.

An overview of deploying membrane bioreactors in saline wastewater treatment from perspectives of microbial and treatment performance

The discharged saline wastewater has severely influenced the aquatic environment as the treatment performance of many wastewater treatment techniques is limited. In addition, the sources of saline wastewater are also plentiful from agricultural and various industrial fields such as food processing, tannery, pharmaceutical, etc. Although high salinity levels negatively impact the performance of both physicochemical and biological processes, membrane bioreactor (MBR) processes are considered as a potential technology to treat saline wastewater under different salinity levels depending on the adaption of the microbial community. Therefore, this study aims to systematically review the application of MBR widely used in the saline wastewater treatment from the perspectives of microbial structure and treatment efficiencies. At last, the concept of carbon dioxide capture and storage will be proposed for the MBR-treating saline wastewater technologies and considered toward the circular economy with the target of zero emission.

Anode modification of sediment microbial fuel cells (SMFC) towards bioremediating mariculture wastewater

Remediation of mariculture wastewater is of great practical importance. In this study, sediment microbial fuel cells (SMFCs) were adopted and carbon felt anodes were modified to enhance COD and ammonia removal in mariculture system. The results showed that the SMFC anode with 5 % (w/w) graphene oxide (GO) coating performed best in pollutants removal and electricity generation. The maximum power density approached 132 mW/m², nearly 4.5 times higher than the unmodified anode. The removal efficiency of COD and ammonia reached 82.1 % and 95.8 % respectively, both improved compared with the control and chemical modification. The modified anode effectively enriched the electrogenic Sulfurovum and Lactobacillus and thus led to a significant improvement in the electrochemical performance of SMFC. This study demonstrates the successful application of SMFCs with GO modified anodes in the in-situ removing pollutants and SMFCs present obvious remediation potential on the contaminated mariculture inhabitant.

Synergistic effect of chitosan-based sludge aggregates CS@NGS inoculum accelerated the start-up of biofilm reactor treating aquaculture effluent: Insights into performance, microbial characteristics, and functional genes

The moving bed bioreactor (MBBR) process has drawn more attention as a promising biological wastewater treatment process. Nevertheless, achieving quick start-up and microbial biofilm formation remains a significant challenge. Consequently, the present study investigated a novel chitosan-based natural sludge (CS@NGS) seeding strategy for the accelerated start-up of MBBR. Three identical bioreactors were employed; the first bioreactor was without sludge seed as the control (BR1), the second was inoculated only with sludge (BR2), and the third was inoculated with CS@NGS according to the proposed seeding method (BR3). All bioreactors were utilised to treat simulated recirculating aquaculture systems (RAS) effluent. Resultantly, the CS@NGS shortened the start-up period from over twenty to seven days due to the enhanced initial microbial adhesion and biofilm formation. Under optimal conditions, the ammonium removal in BR3 approached 100%, which was relatively higher than BR2 (96.35 ± 1.12%) and BR1 (92.56 ± 2.17%). Moreover, a low nitrite accumulation was exhibited in the effluents, approximately ≤0.03 mg L^-1. The process performance correlated positively with core bacteria from the genera Nakamurella, Hyphomicrobium, Nitrospira, Paenarthrobacter, Rhodococcus, and Stenotrophobacter. The quantitative polymerase chain reaction (qPCR) results demonstrated that the CS@NGS enhanced the expressions of amoA, nxrB, nirK, nirS, narG, and napA nitrogen metabolism-related functional genes to varying degrees. The present study findings can assist the rapid start-up of aquaculture biofilters utilised to solve high nitrite and ammonia accumulation in recirculated water from industrial RAS.

Mitigation of hazards and risks of emerging pollutants through innovative treatment techniques of post methanated distillery effluent - A review

Distillery wastewater has high biological and chemical oxygen demand and requires additional treatment before it can be safely discharged into receiving water. It is usually processed through a biomethanation digester and the end product is the post-methanated distillery effluent (PMDE). Research have shown that PMDE released by molasses-based distilleries is a hazardous effluent that can cause harm to the biota and the environment; it contains elevated amount of total dissolved solids (TDS), total suspended solids (TSS) and excess levels of persistent organic compounds (POPs), heavy metals, phenolic compounds, and salts. The practice of wastewater reuse for irrigation in many water scarce countries necessitates the proper treatment of PMDE before it is discharged into receiving water. Convention methods have been in practice for decades, but innovative technologies are needed to enhance the efficiency of PMDE treatment. Advance physical treatment such as membrane separation technology using graphene, ion-exchange and ultrafiltration membranes; chemical treatment such as advanced oxidation methods, electrocoagulation and photocatalytic technologies; biological treatment such as microbial and enzymatic treatment; and hybrid treatment such as microbial-fuel cell (MFC), genetically modified organisms (GMO) and constructed wetland technologies, are promising new methods to improve the quality of PMDE. This review provides insight into current accomplishments evaluates their suitability and discusses future developments in the detoxification of PMDE. The consolidated knowledge will help to develop a better management for the safe disposal and the reuse of PMDE wastewater.

Exploiting Biofilm Characteristics to Enhance Biological Nutrient Removal in Wastewater Treatment Plants

Biological treatments are integral processes in wastewater treatment plants (WWTPs). They can be carried out using sludge or biofilm processes. Although the sludge process is effective for biological wastewater systems, it has some drawbacks that make it undesirable. Hence, biofilm processes have gained popularity, since they address the drawbacks of sludge treatments, such as the high rates of sludge production. Although biofilms have been reported to be essential for wastewater, few studies have reviewed the different ways in which the biofilm properties can be explored, especially for the benefit of wastewater treatment. Thus, this review explores the properties of biofilms that can be exploited to enhance biological wastewater systems. In this review, it is revealed that various biofilm properties, such as the extracellular polymeric substances (EPS), quorum sensing (Qs), and acylated homoserine lactones (AHLs), can be enhanced as a sustainable and cost-effective strategy to enhance the biofilm. Moreover, the exploitation of other biofilm properties such as the SOS, which is only reported in the medical field, with no literature reporting it in the context of wastewater treatment, is also recommended to improve the biofilm technology for wastewater treatment processes. Additionally, this review further elaborates on ways that these properties can be exploited to advance biofilm wastewater treatment systems. A special emphasis is placed on exploiting these properties in simultaneous nitrification and denitrification and biological phosphorus removal processes, which have been reported to be the most sensitive processes in biological wastewater treatment.

A Study of a Composite Biofilm Reactor for the Treatment of Mariculture Wastewater: Performance and Microbial Communities

Mariculture wastewater is one of the main sources of saline wastewater. This study used a waterfall aeration biofilm reactor combined with a sequencing batch reactor (WABR-SBR) to treat simulated mariculture sewage. Despite the high inhibition by salinity, the reactor maintained a high removal efficiency for organic matter and ammonium nitrogen. The ammonia nitrogen removal rate was greater than 99%, while that for nitrite, which is extremely toxic to farmed animals, was greater than 80%. Fourier transform infrared spectroscopy and scanning electron microscopy showed that salinity affected the surface structure and composition of biofilms, which became compact and secreted more solute to resist the impact of salinity. High throughput 16S rRNA sequencing revealed that the main phyla in the biofilms were Actinobacteria, Proteobacteria, Firmicutes, and Bacteroidetes. Metagenomic annotation of genes further indicated nitrogen metabolism pathways under high salinity. The conclusions of this study can provide a theoretical foundation for the biological treatment of high-salt wastewater and provide a technical reference for further application of the WABR-SBR composite system.

Impact of carbon/nitrogen ratio on the performance and microbial community of sequencing batch biofilm reactor treating synthetic mariculture wastewater

The differences of cultured organism species, aquaculture model and supervisor mode lead to different carbon/nitrogen ratios in mariculture wastewater. Therefore, the performance, microbial community and enzymatic activity of sequencing batch biofilm reactor were compared in treating synthetic mariculture wastewater at different chemical oxygen demand/nitrogen (COD/N) ratios. Compared with COD/N ratio of 6, the ammonia-oxidizing rate and nitrite-oxidizing rate at COD/N ratio of 5, 4 and 3 increased by 3.66 % and 3.08 %, 11.19 % and 14.95 %, and 24.50 % and 32.54 %, respectively. Similarly, the ammonia monooxygenase and nitrite oxidoreductase activities increased by 3.50 % and 6.76 %, 11.09 % and 16.22 %, and 25.43 % and 39.19 % at COD/N ratio at 5, 4 and 3, respectively. However, the denitrifying rate and denitrification enzymatic activity declined with the decrease of C/N ratio from 6 to 3. The production, protein content and polysaccharide content of loosely bound extracellular polymeric substances (LB-EPS) and tightly bound EPS (TB-EPS) reduced with the decrease of COD/N ratio from 6 to 3. The abundance of nitrifying genera increased with the decrease of COD/N ratio from 6 to 3, whereas most of denitrification genera displayed a decreasing trend. The microbial co-occurrence pattern, keystone taxa and significant difference were altered with the decrease of COD/N ratio. Among the keystone taxa, Thauera, Denitromonas, Nitrosomonas and Denitratisoma had a close link with nitrogen transformation. The present results can provide some theoretical basis for evaluating the effect of carbon/nitrogen ratio on the nitrogen removal of biological wastewater treatment systems.

Single-stage production of miscanthus hydrochar at low severity conditions and application as adsorbent of copper and ammonium ions

In the framework of bio-circular economy, miscanthus biomass was valorized through a single-stage, low severity hydrothermal carbonization process. The produced hydrochars were characterized using elemental and spectroscopic methodologies. It was determined that as the temperature increased so did the C content (47.9 and 68.9% for the samples prepared at 180 and 260 °C, respectively), whereas the O content decreased (from 44.2 to 25.5%, respectively). The adsorption behaviour of the hydrochars was investigated in the adsorption of Cu²⁺ and NH₄⁺ and MIS-180 was determined as the optimum sample, achieving q_max values of 310 and 71 mg g^-1, respectively. Isotherm and kinetic analysis indicated the higher number of O-containing functional groups of MIS-180 as the main reason for its higher adsorption capacities. Furthermore, Cu²⁺ adsorption followed the 2nd-order kinetic model, whereas NH₄⁺ adsorption followed the 1st-order kinetic model, due to the different mechanisms involved, inner-sphere and outer-sphere complex formation, respectively.

Application of Floating TiO2 Photocatalyst for Methylene Blue Decomposition and Salmonella typhimurium Inactivation

The growing level of wastewater as well as pollution of freshwater by various bacteria are essential worldwide issues which have to be solved. In this contribution, nanocrystalline anatase TiO2 films deposited by magnetron sputtering on high-density polystyrene (HDPE) beads were applied as floating photocatalysts for Salmonella typhimurium bacterial inactivation in water for the first time. Additionally, the photocatalytic degradation of methylene blue dye in the presence of HDPE beads with TiO2 film under UV-B irradiation was investigated. The suitability to adopt such floating photocatalyst structures for practical applications was tested in cycling experiments. The detailed surface morphology, crystal structure, elemental mapping, surface chemical composition and bond analysis of deposited TiO2 films were investigated by scanning electron microscope, X-ray diffractometer and X-ray photoelectron spectroscope techniques. The bacterial viability as well as MB decomposition experiments showed promising results by demonstrating that 6% of bacterial colonies were formed after the first run and only about 1% after the next four runs, which is an appropriate outcome for practical applications. NPN uptake results showed that the permeability of the outer membrane was significantly increased as well.