A review of pesticides sorption in biochar from maize, rice, and wheat residues: Current status and challenges for soil application

Agricultural biomass/waste-based materials could be a potential adsorption-type remediation contributor to environmental pollution induced by pesticides-A critical review

The widespread use of pesticides that are inevitable to keep the production of food grains brings serious environmental pollution problems. Turning agricultural biomass/wastes into materials addressing the issues of pesticide contaminants is a feasible strategy to realize the reuse of wastes. Several works summarized the current applications of agricultural biomass/waste materials in the remediation of environmental pollutants. However, few studies systematically take the pesticides as an unitary target pollutant. This critical review comprehensively described the remediation effects of crop-derived waste (cereal crops, cash crops) and animal-derived waste materials on pesticide pollution. Adsorption is considered a superior and highlighted effect between pesticides and materials. The review generalized the sources, preparation, characterization, condition optimization, removal efficiency and influencing factors analysis of agricultural biomass/waste materials. Our work mainly emphasized the promising results in lab experiments, which helps to clarify the current application status of these materials in the field of pesticide remediation. In the meantime, rigorous pros and cons of the materials guide to understand the research trends more comprehensively. Overall, we hope to achieve a large-scale use of agricultural biomass/wastes.

Engineered lignocellulosic based biochar to remove endocrine-disrupting chemicals: Assessment of binding mechanism

The safety and health of aquatic organisms and humans are threatened by the increasing presence of pollutants in the environment. Endocrine disrupting chemicals are common pollutants which affect the function of endocrine and causes adverse effects on human health. These chemicals can disrupt metabolic processes by interacting with hormone receptors upon consumptions by humans or aquatic species. Several studies have reported the presence of endocrine disrupting chemicals in waterbodies, food, air and soil. These chemicals are associated with increasing occurrence of obesity, metabolic disorders, reproductive abnormalities, autism, cancer, epigenetic variation and cardiovascular risk. Conventional treatment processes are expensive, not environment friendly and unable to achieve complete removal of these harmful chemicals. In recent years, biochar from different sources has gained a considerable interest due to their adsorption efficiency with porous structure and large surface areas. biochar derived from lignocellulosic biomass are widely used as sustainable catalysts in soil remediation, carbon sequestration, removal of organic and inorganic pollutants and wastewater treatment. This review conceptualizes the production techniques of biochar from lignocellulosic biomass and explores the functionalization and interaction of biochar with endocrine-disrupting chemicals. This review also identifies the further needs of research. Overall, the environmental and health risks of endocrine-disrupting chemicals can be dealt with by biochar produced from lignocellulosic biomass as a sustainable and prominent approach.

Mechanisms of adsorption and functionalization of biochar for pesticides: A review

Agricultural production relies heavily on pesticides. However, factors like inefficient application, pesticide resistance, and environmental conditions reduce their effective utilization in agriculture. Subsequently, pesticides transfer into the soil, adversely affecting its physicochemical properties, microbial populations, and enzyme activities. Different pesticides interacting can lead to combined toxicity, posing risks to non-target organisms, biodiversity, and organism-environment interactions. Pesticide exposure may cause both acute and chronic effects on human health. Biochar, with its high specific surface area and porosity, offers numerous adsorption sites. Its stability, eco-friendliness, and superior adsorption capabilities render it an excellent choice. As a versatile material, biochar finds use in agriculture, environmental management, industry, energy, and medicine. Added to soil, biochar helps absorb or degrade pesticides in contaminated areas, enhancing soil microbial activity. Current research primarily focuses on biochar produced via direct pyrolysis for pesticide adsorption. Studies on functionalized biochar for this purpose are relatively scarce. This review examines biochar's pesticide absorption properties, its characteristics, formation mechanisms, environmental impact, and delves into adsorption mechanisms, functionalization methods, and their prospects and limitations.

Post-sorption of Cd, Pb, and Zn onto peat, compost, and biochar: Short-term effects of ecotoxicity and bioaccessibility

Contamination by potentially toxic metals and metalloids (PTMs) has become a significant health and environmental issue worldwide. Sorption has emerged as one of the most prominent strategies for remediating both soil and water contamination. New sorbents are being developed to provide economically viable and environmentally sound alternatives, in alignment with the principles of the Sustainable Development Goals. This research aimed to assess the potential effects on human health and environmental toxicity following the sorption of cadmium (Cd), lead (Pb), and zinc (Zn) using peat, compost, and biochar as sorbents. The peat was collected in Brazil, a country with a tropical climate, while the compost and biochar were produced from the organic fraction of municipal solid waste (OFMSW). In terms of bioaccessibility, the results showed the following order: compost < biochar < peat for Pb, and compost < peat < biochar for Cd and Zn. There was a significant growth inhibition for Eruca sativa and Zea mays exposed to increasing concentrations of PTMs treated with peat and compost. The presence of contaminants played a decisive role on immobilization of neonates of Ceriodaphnia silvestrii after treatments with compost and, especially, peat. However, the biochar addition rate caused a significant influence on the outcomes of ecotoxicity across all tested species. Although the samples treated with biochar exhibited lower residual concentrations of PTMs than those treated with compost and peat, the inherent toxicity of biochar might be attributed to the material itself. The exposure to residual PTM concentrations post-desorption caused ecotoxic effects on tested species, emphasizing the need to assess PTM desorption potential. Peat, compost, and biochar are promising alternatives for the sorption of PTMs, but the addition rates must be properly adjusted to avoid the occurrence of undesirable ecotoxicological effects. This research offers valuable insights for sustainable environmental management and protection by thoroughly investigating the impacts of different sorbents and contaminants on aquatic and terrestrial ecosystems.

When biochar is involved in rhizosphere dissipation and plant absorption of pesticides: A meta-analysis

Clarifying the influences of biochar input on the rhizosphere dissipation and plant absorption of pesticides is a crucial prerequisite for utilizing biochar in the restoration of pesticide-contaminated soils. Nevertheless, the application of biochar to pesticide-contaminated soils does not always achieve consistent results on the rhizosphere dissipation and plant absorption of pesticides. Under the new situation of vigorously promoting the application of biochar in soil management and carbon sequestration, a timely review is needed to further understand the key factors affecting biochar remediation of pesticide-contaminated soil. In this study, a meta-analysis was conducted utilizing variables from three dimensions of biochar, remediation treatment, and pesticide/plant type. The pesticide residues in soil and the pesticide uptake by plant were used as response variables. Biochar with high adsorption capacity can impede the dissipation of pesticides in soil and mitigate their absorption by plants. The specific surface area of biochar and the type of pesticide are critical factors that affect pesticide residues in soil and plant uptake, respectively. Applying biochar with high adsorption capacity, based on specific dosages and soil characteristics, is recommended for the remediation of continuously cultivated soil contaminated with pesticides. This article aims to provide a valuable reference and understanding for the application of biochar-based soil remediation technology and the treatment of pesticide pollution in soil.

Remediation of pesticides contaminated water using biowastes-derived carbon rich biochar

The competition impact and feedstock type on the removal of water pesticides using biochar have not yet been sufficiently investigated. Therefore, here we investigated the potentiality of three different biochars (BCs) derived from rice husk (RHB), date pit (DPB), and sugarcane bagasse (SBB) biowastes for the simultaneous removal of ten pesticides from water in a competitive adsorption system. The BCs structural characterization and morphology were investigated by XRD, FTIR spectroscopy and SEM analysis. The potential adsorption mechanisms have been investigated using various isothermal and kinetic models. RHB showed the highest removal percentages (61% for atrazine/dimethoate and 97.6% for diuron/chlorfenvinphos) followed by DPB (56% for atrazine/dimethoate and 95.4% for diuron/chlorpyrifos) and then SBB (60.8% for atrazine/dimethoate and 90.8% for chlorpyrifos/malathion). The higher adsorption capacity of RHB and DPB than SBB can be due to their high total pore volume and specific surface area (SSA). Langmuir model described well the sorption data (R2 = 0.99). Adsorption equilibrium was achieved after 60 min for RHB, and 120 min for both DPB and SBB. The optimum adsorbent dose (g/L) was 10 for RHB and 4 for DPB and SBB. The removal efficiency of pesticides was enhanced by decreasing pH from 9 to 5 by RHB and to 3 by DPB and SBB. XRD and FTIR spectroscopy confirmed that BCs contain some active adsorption groups and metal oxides such as MgO, SiO, Al2O3, CaO, and TiO2 that can play an effective role in the pesticides sorption. BET-N2 adsorption analysis demonstrated that the BC pore size contributes significantly to pesticide adsorption. These findings indicate that RHB, DPB, and SBB have ability for adsorption of water pesticides even under acidic conditions. Therefore, the rice husk, date pit, and sugarcane bagasse biowastes could be pyrolyzed and reused as effective and low-cost sorbents for elimination of hazardous substances such as pesticides in the aqueous environments.

2-Methyl-4-chlorophenoxyacetic acid (MCPA) sorption and desorption as a function of biochar properties and pyrolysis temperature

2-Methyl-4-chlorophenoxyacetic acid (MCPA) is a highly mobile herbicide that is frequently detected in global potable water sources. One potential mitigation strategy is the sorption on biochar to limit harm to unidentified targets. However, irreversible sorption could restrict bioefficacy thereby compromising its usefulness as a vital crop herbicide. This research evaluated the effect of pyrolysis temperatures (350, 500 and 800°C) on three feedstocks; poultry manure, rice hulls and wood pellets, particularly to examine effects on the magnitude and reversibility of MCPA sorption. Sorption increased with pyrolysis temperature from 350 to 800°C. Sorption and desorption coefficients were strongly corelated with each other (R2 = 0.99; P < .05). Poultry manure and rice hulls pyrolyzed at 800°C exhibited irreversible sorption while for wood pellets at 800°C desorption was concentration dependent. At higher concentrations some desorption was observed (36% at 50 ppm) but was reduced at lower concentrations (1-3% at < 5 ppm). Desorption decreased with increasing pyrolysis temperature. Sorption data were analyzed with Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherm models. Freundlich isotherms were better predictors of MCPA sorption (R2 ranging from 0.78 to 0.99). Poultry manure and rice hulls when pyrolyzed at higher temperatures (500 and 800°C) could be used for remediation efforts (such as spills or water filtration), due to the lack of desorption observed. On the other hand, un-pyrolyzed feedstocks or biochars created at 350°C could perform superior for direct field applications to limit indirect losses including runoff and leaching, since these materials also possess the ability to release MCPA subsequently to potentially allow herbicidal action.

Application of hollow fiber-protected liquid-phase microextraction combined with GC-MS in determining Endrin, Chlordane, and Dieldrin in rice samples

This paper introduces a novel and minimized sample preparation technique based on hollow fiber-protected liquid-phase microextraction that can be used in joint with gas chromatography-mass spectrometry (GC-MS) detection to extract three organochlorine pesticides-Endrin, Chlordane, and Dieldrin-from rice samples. To that end, a single-walled carbon nanotube (SWCNT) and a proper ionic liquid (IL) were ultrasonically dispersed and injected into the lumen of hollow fiber as the extraction phase for preconcentrating and extracting the target analytes from the rice samples. The effects of the type of nanoparticles, ILs, and desorption solvent on the efficiency of extracting the analytes were investigated based on the one-factor-at-a-time (OFAT) approach. In addition, other parameters influencing the extraction procedure were optimized using an experimental design that decreased the number of experiments, reagent consumption, and costs. Under optimized conditions, the limits of detection and quantification in determining mentioned pesticides varied between 0.019-0.029 and 0.064-0.098 ng mL-1, respectively. The calibration graphs to measure Endrin, Chlordane, and Dieldrin were linear over the concentration range of 0.064-13.2, 0.098-16.7, and 0.092-11.4 ng mL-1, respectively. The relative standard deviations for inter-day and intra-day analysis were below 7.06 and 4.75% for the triplicate determination of three organochlorine pesticides. Besides, the relative recoveries and standard deviations of Endrin, Chlordane, and Dieldrin for analyzing several Iranian rice samples were between 86.0-92.9% and 4.5-5.8%, respectively. The results were compared with other similar works in literature, proving that the proposed method is efficient and useful for routine monitoring of organochlorine compounds in food samples.

Validation and Simultaneous Monitoring of 311 Pesticide Residues in Loamy Sand Agricultural Soils by LC-MS/MS and GC-MS/MS, Combined with QuEChERS-Based Extraction

Soil can be contaminated by pesticide residues through agricultural practices, by direct application or through spray-drift in cultivations. The dissipation of those chemicals in the soil may pose risks to the environment and human health. A simple and sensitive multi-residue analytical method was optimized and validated for the simultaneous determination of 311 active substances of pesticides in agricultural soils. The method involves sample preparation with QuEChERS-based extraction, and determination of the analytes with a combination of GC-MS/MS and LC-MS/MS techniques. Calibration plots were linear for both detectors over the range of five concentration levels, using matrix-matched calibration standards. The obtained recoveries from fortified-soil samples ranged from 70 to 119% and from 72.6 to 119% for GC-MS/MS and LC-MS/MS, respectively, while precision values were <20% in all cases. As regards the matrix effect (ME), signal suppression was observed in the liquid chromatography (LC)-amenable compounds, which was further estimated to be negligible. The gas chromatography (GC)-amenable compounds showed enhancement in the chromatographic response estimated as medium or strong ME. The calibrated limit of quantification (LOQ) value was 0.01 μg g^-1 dry weight for most of the analytes, while the corresponding calculated limit of determination (LOD) value was 0.003 μg g^-1 d.w. The proposed method was subsequently applied to agricultural soils from Greece, and positive determinations were obtained, among which were non-authorized compounds. The results indicate that the developed multi-residue method is fit for the purpose of analyzing low levels of pesticides in soil, according to EU requirements.

Dissipation kinetics of chlorpyrifos and 3,5,6 trichloro-2-pyridinol under vegetation of different aromatic grasses: Linkage with enzyme kinetics and microbial community of soil

The dissipation of chlorpyrifos (CP) and its hydrolytic metabolite 3,5,6-trichloro-2-pyridinol (TCP) in the soil is crucial for safe agriculture. However, there is still lacking relevant information about its dissipation under different vegetation for remediation purposes. In the present study, evaluation of dissipation of CP and TCP in non-planted and planted soil with different cultivars of three types of aromatic grass viz Cymbopogon martinii (Roxb. Wats), Cymbopogon flexuosus, and Chrysopogon zizaniodes (L.) Nash was examined in light of soil enzyme kinetics, microbial communities, and root exudation. Results revealed that the dissipation of CP was well-fitted into a single first-order exponential model (SFO). A significant reduction in the half-life (DT₅₀) of CP was observed in planted soil (30-63 days) than in non-planted soil (95 days). The presence of TCP in all soil samples was observed. The three types of the inhibitory effect of CP i.e. linear mixed inhibition (increase in enzyme-substrate affinity (Km) and decrease in enzyme pool (Vmax), un-competitive inhibition (decrease in Km and Vmax), and simple competitive inhibition were observed on soil enzymes involved in mineralization of carbon, nitrogen, phosphorus, and sulfur. The improvement in the enzyme pool (Vmax) was observed in planted soil. Streptomyces, Clostridium, Kaistobacter, Planctomyces, and Bacillus were the dominant genera in CP stress soil. CP contamination in soil demonstrated a reduction of richness in microbial diversity and enhancement of functional gene family related to cellular process, metabolism, genetic, and environmental information processing. Among all the cultivars, C. flexuosus cultivars demonstrated a higher dissipation rate of CP along with more root exudation.

Enhanced gaseous acetone adsorption on montmorillonite by ball milling generated Si-OH and interlayer under synergistic modification with H2O2 and tetramethylammonium bromide

Montmorillonite (Mt) is a potential adsorbent for volatile organic vapor removal from contaminated soils because of its rich reserves and porous nature, but its inertia surface property has limited its application for polar compounds. In this study, modifications of Mt were carried out by high energy ball milling with H₂O₂ and tetramethylammonium bromide (TMAB) to obtain adsorbents with both high porosity and abundant Si-OH groups (BHTMt). The microporous structure produced by TMAB insertion as well as the silanol (Si-OH) groups formed by H₂O₂ oxidation improved the adsorption of acetone by the modified material. The adsorption capacity of BHTMt for acetone was increased by 80% compared to the original Mt. The effect of H₂O₂ dosage on the adsorption performance for gaseous acetone was investigated by dynamic adsorption experiments. The adsorption kinetic results demonstrated that the adsorption of acetone by the modified material was subject to both physical and chemical adsorption. Density functional theory calculations indicated that there was no obvious interaction between TMAB and acetone, and the materials adsorbed acetone mainly through hydrogen bonding interaction of Si-OH as well as pore filling effects.

Biochar amendment improves growth and the essential oil quality and quantity of peppermint (Mentha × piperita L.) grown under waste water and reduces environmental contamination from waste water disposal

The reuse of waste water (WW) in agriculture is challenging as a potential strategy for sustainable agriculture development. However, its high content of heavy metals may cause damage to ecosystems. The property of biochar (BC) to minimize heavy metals accumulation into the soil was studied taking as a case study peppermint (Mentha x piperita L., Lamiaceae) irrigated with WW. Application of BC and WW, separately, promoted height, shoot number, crown diameter, internode length, leaf number, leaf length, leaf width, fresh (FW) and dry aerial parts weights (DW), root FW and root DW of peppermint. Also an increment in canopy diameter was observed. BC application considerably increased N, Mg, Mn, Fe and Zn, while WW increased N, P, K and Fe levels. Irrigation of peppermint with WW led to an increase of chlorophyll (Chl) a, Chl b, Chl a+b, carotenoids, anthocyanins, photosynthetic rate, transpiration, stomatal conductance, relative water content (RWC), and crop yield. On the other hand, BC application led to a decrease of Cd and Pb accumulation in plants. BC and WW application, separately, increased the essential oil content, the total phenol content, and the antioxidant capacity. Regardless of BC levels, irrigation of plants with WW decreased the percentage of menthone, menthofuran, isomenthone and pulegone in the essential oil, and increased the percentage of menthol and carvone. Similarly, BC application raised the percentage of menthol, and decreased that of pulegone. Overall, the application of BC in the culture medium is able to decrease the heavy metal concentration and improves the essential oil quality and quantity of peppermint under WW irrigation.

Effective Usage of Biochar and Microorganisms for the Removal of Heavy Metal Ions and Pesticides

The bioremediation of heavy metal ions and pesticides is both cost-effective and environmentally friendly. Microbial remediation is considered superior to conventional abiotic remediation processes, due to its cost-effectiveness, decrement of biological and chemical sludge, selectivity toward specific metal ions, and high removal efficiency in dilute effluents. Immobilization technology using biochar as a carrier is one important approach for advancing microbial remediation. This article provides an overview of biochar-based materials, including their design and production strategies, physicochemical properties, and applications as adsorbents and support for microorganisms. Microorganisms that can cope with the various heavy metal ions and/or pesticides that enter the environment are also outlined in this review. Pesticide and heavy metal bioremediation can be influenced by microbial activity, pollutant bioavailability, and environmental factors, such as pH and temperature. Furthermore, by elucidating the interaction mechanisms, this paper summarizes the microbe-mediated remediation of heavy metals and pesticides. In this review, we also compile and discuss those works focusing on the study of various bioremediation strategies utilizing biochar and microorganisms and how the immobilized bacteria on biochar contribute to the improvement of bioremediation strategies. There is also a summary of the sources and harmful effects of pesticides and heavy metals. Finally, based on the research described above, this study outlines the future scope of this field.

Environmental fate and efficiency of bispyribac‑sodium in rice soils under conventional and alternative production systems affected by fresh and aged biochar amendment

Irrigation and tillage practice alternatives to conventional flooding production, with or without organic amendments, are attracting great interest to adapt rice cultivation to climate change. However, they can alter the behaviour of pesticides and their efficiency against weeds. A two-year field experiment was conducted to investigate how the environmental fate and the weed control efficiency (WCE) of bispyribac‑sodium (BS) were influenced by biochar produced from holm oak prunings (BHO) testing both the fresh and the aged effects. The treatments were: flooding irrigation and tillage (FT), sprinkler irrigation and tillage (ST), sprinkler irrigation and no-tillage (SNT), and the corresponding homologues with BHO addition (FT-BHO, ST-BHO, and SNT-BHO, respectively). Fresh BHO amendment decreased the sorption of BS onto the soil in all treatments, while, after aging, it also decreased sorption in FT-BHO (1.3-fold) but increased it in SNT-BHO and ST-BHO (1.1-fold). BHO addition reduced BS persistence under non-flooding and flooding incubation conditions, except for FT under the former condition for which t_1/2 increased ≈1.5-fold in both years. The addition of BHO led to a decrease in BS leaching from 58.3 % and 44.6 % and from 70.4 % and 58.1 % in ST and FT to 50.1 % and 38.3 % and 63.6 % and 50.3 % in the homologue amended soils for the fresh and aged years, respectively. While fresh BHO addition decreased the WCE of BS in SNT-BHO, ST-BHO, and FT-BHO on average by a factor of 1.5, with aged BHO there was only such a decrease (by a factor of 1.4) in FT-BHO. The use of BHO could be effective for reducing water contamination by BS in flooding or sprinkler irrigation rice farming as long as conventional tillage is used. But it may also contribute to greatly reducing the herbicide's efficiency, although with time to allow aging, this reduction would only persist under conventional flooding production.

Combined remediation effects of biochar and organic fertilizer on immobilization and dissipation of neonicotinoids in soils

Neonicotinoid (NEO) pesticides have become a potential risk to ecological safety and human health after application. The combined use of biochar and organic fertilizer (OF) is a promising approach to reduce pesticide adverse effects and improve soil fertility in agricultural soils. However, the combined remediation effects of biochar and OF on immobilization and dissipation of NEOs in soils have not previously been systematically investigated. In this study, biochars derived from peanut shell prepared at low/high pyrolysis temperatures (PS400 and PS900) were combined with composted chicken manure (CCM) as an example for OF to remediate contaminated soils toward six typical NEOs, nitenpyram (NIT), thiamethoxam (THIA), clothianidin (CLO), imidacloprid (IMI), acetamiprid (ACE), thiacloprid (THI). Results shown that both biochars and CCM were effective in improving soil sorption capacity and immobilization efficiency. The Freundlich affinity parameters (K_f) of NEOs in soils increased 7.2-12.0 times after the combined remediation of biochar and CCM, and the K_f of six NEOs had negative correlation with their lipophilicity (p < 0.05), which followed by THI > ACE ≈ IMI > CLO > THIA > NIT. Meanwhile, NEOs-abiotic degradation was accelerated by biochar, CCM and their combined addition by adjusting soil pH and stimulating hydrolysis action. Biotic degradation was dominant in NEOs dissipation processes in amended soils, and the contribution ratios of biotic degradation (CR_bio) were in the range of 25.4-99.0%. The combined use of biochar and CCM selectively stimulated the relative abundance of NEOs-degraders, which simplified abiotic degradation of -NO₂-containing NEOs (viz., NIT, THIA, CLO, and IMI), but inhibited -C≡N-containing NEOs (viz., ACE and THI). The combined remediation provided a strategy for immobilizing NEOs and facilitating dissipation of -NO₂-containing NEOs in soils. The results in this study provide valuable information for policymakers and decision-makers to choose appropriate soil remediation approaches with respect to the NEO types.

Sorption and post-sorption performances of Cd, Pb and Zn onto peat, compost and biochar

The development of waste-derived sorbents to immobilize potentially toxic elements (PTEs) is a promising strategy, contributing to the achievement of sustainable development goals (SDGs). Therefore, this study aimed to assess the sorption performance of cadmium (Cd), lead (Pb) and zinc (Zn), comparing sorbents derived from organic fraction of municipal solid waste (composts and biochars) with peat. The physicochemical characterization, equilibrium of sorption, post-sorption analyzes and bioaccessibility were investigated. Results showed that the sorbents have distinct characteristics; however, each material have their particularities favorable to sorption. For instance, peat and composts have the highest cation exchange capacity (800-1100 mmol_c kg^-1), while biochar produced at 700 °C has the highest specific surface area (91.21 m² g^-1). The sorption equilibrium data revealed the actual sorption capacity and was well explained by the Freundlich and Langmuir isotherms and, in some cases, by the Dubinin-Radushkevich model. Post-sorption analyzes indicated the occurrence of several sorption mechanisms, driven by the physicochemical properties. Electrostatic interaction stood out for peat and compost. The FTIR spectrum for peat proved the complexation with oxygenated functional groups. The composts showed variations in the released cations (e.g. Ca²⁺ and K⁺), indicating cation exchange. Differently, for biochars, the XRD patterns showed that precipitation or coprecipitation seems to be one of the main mechanisms, especially for Cd and Pb. Regarding human bioaccessibility, the results of the gastric phase simulation (pH∼1.20) revealed lower percentages of Pb (33-81%) than Cd (91-99%) or Zn (82-99%), especially for the highest concentrations. Nevertheless, in numerical terms, all bioaccessible concentrations inspire care. In conclusion, among the sorbents, composts and biochars presented the best sorption performances and, therefore, have great potential for environmental applications. Furthermore, the bioaccessibility findings indicate that these assays, still little used in experiments with sorbents, are an important tool that should be better explored in the assessment of the environmental risk associated with contamination.

Microbially inoculated chars strongly reduce the mobility of alachlor and pentachlorobenzene in an alluvial sediment

The objective of this study was to investigate the transport behavior of two organic and persistent contaminants (alachlor and pentachlorobenzene) on Danube alluvial sediment in the absence and in the presence of microbially inoculated biochar produced at 400 °C and three hydrochars produced at 180, 200, and 220 °C. Stainless steel columns were used for the sorption experiments in nonequilibrium conditions. Obtained results were modeled using the advective-dispersive equation under nonequilibrium conditions. Transport of these compounds through the alluvial sediment column showed that the retention time increased with increasing molecular hydrophobicity. Inoculated biochar increases the retardation of both compounds: twofold for pentachlorobenzene compared with alachlor as a consequence of a higher hydrophobicity. Obtained results indicate that the highest biodegradation coefficient was observed for pentachlorobenzene (λ = 10) in alluvial sediment with addition of an inoculated hydrochar, which is assumed to be a consequence of biosorption. Moreover, all experiments on the columns indicate that the addition of inoculated chars yields a significantly higher R_d coefficient for pentachlorobenzene than for alachlor. Bacterial counts increased in all of the column experiments, which indicates the successful adaptation of microorganisms to experimental conditions and their potential for the removal of a large number of organic pollutants. Thus, addition of inoculated chars to contaminated sediments has the potential as a remediation technique to inhibit the leaching of pollutants to groundwaters. Integr Environ Assess Manag 2022;00:1-10. © 2022 SETAC.

Enhancement of Disease Control Efficacy of Chemical Fungicides Combined with Plant Resistance Inducer 2,3-Butanediol against Turfgrass Fungal Diseases

Turfgrass, the most widely grown ornamental crop, is severely affected by fungal pathogens including Sclerotinia homoeocarpa, Rhizoctonia solani, and Magnaporthe poae. At present, turfgrass fungal disease management predominantly relies on synthetic fungicide treatments. However, the extensive application of fungicides to the soil increases residual detection frequency, raising concerns for the environment and human health. The bacterial volatile compound, 2,3-butanediol (BDO), was found to induce plant resistance. In this study, we evaluated the disease control efficacy of a combination of stereoisomers of 2,3-BDO and commercial fungicides against turfgrass fungal diseases in both growth room and fields. In the growth room experiment, the combination of 0.9% 2R,3R-BDO (levo) soluble liquid (SL) formulation and 9% 2R,3S-BDO (meso) SL with half concentration of fungicides significantly increased the disease control efficacy against dollar spot and summer patch disease when compared to the half concentration of fungicide alone. In field experiments, the disease control efficiency of levo 0.9% and meso 9% SL, in combination with a fungicide, was confirmed against dollar spot and large patch disease. Additionally, the induction of defense-related genes involved in the salicylic acid and jasmonic acid/ethylene signaling pathways and reactive oxygen species detoxification-related genes under Clarireedia sp. infection was confirmed with levo 0.9% and meso 9% SL treatment in creeping bentgrass. Our findings suggest that 2,3-BDO isomer formulations can be combined with chemical fungicides as a new integrated tool to control Clarireedia sp. infection in turfgrass, thereby reducing the use of chemical fungicides.

Biochar in environmental friendly fertilizers - Prospects of development products and technologies

According to the circular economy concept, the production of fertilizers should be closed in a loop, which prevents excessive emissions and harmful effects to the environment. Biological wastes are problematic to collect and transport. They undergo a biological transformation that causes greenhouse gases emission and sanitary hazards. Biomass sources used for organic or organo-mineral fertilizers must be free of pathogens and rich in macro and microelements. Solid residues can be processed thermally. Biochar is a carbon produced by biomass pyrolysis without oxygen presence and has been used for many years to improve soil quality and enhance the efficiency of fertilization. There are many research works on the use of biochar in fertilization. This study is also extended by the latest developments and technologies from the patent database (recent year) and biochar-based fertilizers market. To the best of our knowledge, there is no such review currently available in scientific databases. Based on the collected data, the best method of biochar management was proposed - soil application. Biochar applied to soil has several advantages: it improves soil structure and its sorption capacity, enhances soil-nutrient retention and water-holding capacity, immobilizes contaminants from soil (sorption), reduces greenhouse gas emissions and soil nutrient leaching losses while stimulating the growth of a plant.

Rice straw biochar in combination with farmyard manure mitigates bromoxynil toxicity in wheat (Triticum aestivum L.)

Herbicide residues in agriculture commodities are a serious threat for human health and crop production. We investigated the efficient utilization of rice straw biochar and farmyard manure as organic amendments in mitigating the bromoxynil residues in leaves, grain, husk and root tissues of wheat plants. Growth and yield of wheat plants were also examined under field conditions through a 02-year field experiment. The experiment was set up using two wheat cultivars (Faisalabad-08 and Galaxy-2013) as main plot factors and different formulations of biochar and farmyard manure as sub-plot factors in a randomized complete Block design (split plot arrangement) with 03 replications. Different formulations of biochar (BC) and farmyard manure (FYM) i.e., 100 BC: 00 FYM, 75 BC: 25 FYM, 50 BC: 50 FYM, 25 BC: 75 FYM, 00 BC: 100 FYM and 00 BC: 00 FYM as control were prepared and mixed with soil (2% m/m) at the time of sowing. The wheat crop was sprayed with recommended dose (Buctril Super 60 EC, 825 mL ha^-1) of bromoxynil 40 days after sowing of the crop. Grain, husk, and root samples were collected at maturity while leave samples were taken 10 days after the herbicide application. Results revealed that the organic amendments significantly reduced the bromoxynil concentration in different tissues of wheat plant besides increasing the growth and yield of plants. The highest concentration of bromoxynil residues was found in control treatment whereas; sole biochar (100 BC:00 FYM) reduced the herbicide residues up to 78% in grain and husk of wheat, 40% in leaves and 64% in root tissues along with 41-44% increase in the grain yield. So, rice straw biochar along with farmyard manure could be considered as a promising option for mitigating the residual herbicide issues in the crop plants along with increase in the yield of wheat crop.

Degradation mechanism of montmorillonite-enhanced antibiotic wastewater: performance, antibiotic resistance genes, microbial communities, and functional metabolism

The effective degradation of Sulfamethoxazole (SMX) is of great importance to alleviate environmental pollution. In this study, the degradation capacity of an ordinary sequencing batch activated sludge system (SBR) and montmorillonite (MMT) system was compared for their ability to degrade different concentrations of SMX. Compared with SBR system, the MMT system exhibited higher stability and degradation capacity. The changes in the composition of tightly bound extracellular polymeric substances (TB-EPS) were likely key to the observed stability of the system. High concentrations of SMX inhibited the degradation performance of SBR. MMT-supplemented reduced the generation of antibiotic resistance genes (ARGs). Thauera is a gene that is able to degrade SMX, and its abundance in MMT system reached 7.84%. As potential hosts of ARGs, the proportions of Paenarthrobacter and Caldilineacea were significantly correlated with sulfonamide resistance genes (sul1 and sul2). Overall, MMT-supplemented system was found to be a favorable method of treating antibiotic.

Effects of Biochar-Based Fertilizers on Energy Characteristics and Growth of Black Locust Seedlings

To understand ecological and energy problems in the karst area of Guizhou, China, the effects of using biochar-based fertilizers on the energy characteristics of different species of black locust were studied. To determine the most suitable species and the best rational application method of biochar, an outdoor pot experiment was performed using three species of black locust (White-flowered locust (W), Hong-sen locust (S), and Large-leaf fast-growing locust (L)). There were six treatments: control (CK), MF, RH2MF, RH4MF, W2MF, and W4MF (M—compost; F—NPK fertilizer; RH—rice husk biochar; and W—wood biochar), where the numbers represented the mass ratio of biochar to soil. Biochar-based fertilizers had significant effects on the total organic carbon (TOC), total nitrogen (TN), total potassium (TK), branch gross calorific values (GCV), and ash removal calorific values (AFCV) of seedlings. RH4MF had the best overall values. Different species had significant effects in all indicators (except for TN); the effect on S was better than that of W and L. Principal component analysis showed that RH4MF-S had the highest comprehensive scores. In summary, Hong-sen locust (S) was a high-quality energy species and RH4MF may be used as fertilization for energy forest development. This study provides a reference for future long-term energy forest research in this area.