Leveraging the potential of silver nanoparticles-based materials towards sustainable water treatment

Plant-Based Synthesis, characterization Approaches, Applications and Toxicity of Silver Nanoparticles: A Comprehensive Review

The development of an environmentally benign method for the synthesis of nanoparticles has been facilitated by green chemistry. "Green synthesis" uses a range of biological elements like microbes, plants, and other biodegradable materials to produce NPs. Active biomolecules that are secreted by natural strains and present in the plant extracts serve as both reducing and capping/stabilizing agents. Microorganisms' intracellular enzymes can reduce metal ions, which explains how NPs might potentially nucleate. Plant-based synthesis of nanomaterials is particularly promising owing to abundant resources, simplicity of synthesis, and low cost. Silver nanoparticles (AgNPs) are attracting great attention in the research community due to their wide variety of applications in chemistry, food technology, microbiology, and biomedicine. Recent years have seen a large amount of research on the bio-genic synthesis of AgNPs employing biomaterials like plant extract and bacteria as reducing agents. Herein we discuss a thorough overview of the plant-based synthesis of silver nanoparticles (AgNPs), characterization approaches, applications, and toxicity. The review covers the green chemistry and nanotechnology elements of producing AgNPs, including a thorough discussion of the plant extract mediated synthesis, detailed formation mechanism, and a well-balanced emphasis on hazards and advantages. Based on current developments, the optimisation strategies, applications, and interdisciplinary characteristics are also covered in detail.

Polydopamine/chitosan hydrogels-functionalized polyurethane foams in situ decorated with silver nanoparticles for water disinfection

A new facile route to decorate polyurethane foams (PUF) with dense and uniform silver nanoparticles (AgNPs) to ensure efficient and long-term water disinfection is proposed. The antibacterial sponge was fabricated by sequential treatment with chitosan hydrogels grafting, polydopamine (PDA) coating, and finally in situ growth of AgNPs on the surface of substrate. The morphologies, chemical composition, crystalline nature, mechanical property, and swelling capacity of the composite were characterized. Its silver release behavior and bactericidal performances against Escherichia coli (E. coli) were evaluated. Results show that the composite demonstrated higher mechanical strength (compression strength, 51.34 kPa) and a rapid swelling rate with an equilibrium swelling ratio of 18.2 g/g. It possessed a higher loading amount of AgNPs (35.87 mg/g) than that of PUF@Ag (8.21 mg/g) and restricted the cumulative silver release of below 0.05% after 24-h immersion in water. Besides, it presented efficient bactericidal activity with complete reduction of E. coli with 10 min of contact time. The strong bactericidal action was probably governed by strengthening the contact between AgNPs immobilized on the substrate and bacteria cells. Furthermore, the composite demonstrated exceptional reusability for five cycles and exhibited a superior processing capacity in the flow test. Finally, the composite could effectively disinfect the natural water sample like a river in 30 min under real conditions.

Light-mediated biosynthesis of size-tuned silver nanoparticles using Saccharomyces cerevisiae extract

Bio-based production of silver nanoparticles represents a sustainable alternative to commercially applied physicochemical manufacturing approaches and provides qualitatively highly valuable nanomaterials due to their narrow size dispersity, high stability and biocompatibility with broad application potentials. The intrinsic features of nanoparticles depend on size and shape, whereby the controlled synthesis is a challenging necessity. In the present study, the biosynthesis of size-tuned silver nanoparticles based on cell-free extracts of Saccharomyces cerevisiae DSM 1333 was investigated. Single parameter optimization strategies in phases of cultivation, extraction, and synthesis were performed to modify the nanoparticle scale and yield. Visible light was exploited as a tool in nanoparticle production. The influence of white light on the biosynthesis of silver nanoparticles was determined by using novel LED systems with the exposition of varying irradiation intensities and simultaneous performance of control experiments in the dark. Characterization of the resulting nanomaterials by spectrophotometric analysis, dynamic light scattering, scanning electron microscopy, and energy dispersive X-ray spectroscopy, revealed spherical silver nanoparticles with controlled, light-mediated size shifts in markedly increased quantities. Matching of irradiated and non-irradiated reaction mixtures mirrored the enormous functionality of photon input and the high sensitivity of the biosynthesis process. The silver nanoparticle yields increased by more than 90% with irradiation at 1.0 ± 0.2 mW cm - 2 and the reduction of particle dimensions was achieved with significant shifts of size-specific absorption maxima from 440 to 410 nm, corresponding to particle sizes of 130 nm and 100 nm, respectively. White light emerged as an excellent tool for nano-manufacturing with advantageous effects for modulating unique particle properties.

Application of Engineered Nanomaterials as Nanocatalysts in Catalytic Ozonation: A Review

Given the growing scarcity of water and the continuous increase in emerging pollutants detected in water bodies, there is an imperative need to develop new, more effective, and sustainable treatments for wastewater. Advanced oxidation processes (AOPs) are considered a competitive technology for water treatment. Specifically, ozonation has received notable attention as a promising approach for degrading organic pollutants in wastewater. However, different groups of pollutants are hardly degradable via single ozonation. With continuous development, it has been shown that using engineered nanomaterials as nanocatalysts in catalytic ozonation can increase efficiency by turning this process into a low-selective AOP for pollutant degradation. Nanocatalysts promote ozone decomposition and form active free radicals responsible for increasing the degradation and mineralization of pollutants. This work reviews the performances of different nanomaterials as homogeneous and heterogeneous nanocatalysts in catalytic ozonation. This review focuses on applying metal- and carbon-based engineered nanomaterials as nanocatalysts in catalytic ozonation and on identifying the main future directions for using this type of AOP toward wastewater treatment.

Sustainable fabrication of dimorphic plant derived ZnO nanoparticles and exploration of their biomedical and environmental potentialities

Although, different plant species were utilized for the fabrication of polymorphic, hexagonal, spherical, and nanoflower ZnO NPs with various diameters, few studies succeeded in synthesizing small diameter ZnO nanorods from plant extract at ambient temperature. This work sought to pioneer the ZnO NPs fabrication from the aqueous extract of a Mediterranean salt marsh plant species Limoniastrum monopetalum (L.) Boiss. and assess the role of temperature in the fabrication process. Various techniques have been used to evaluate the quality and physicochemical characteristics of ZnO NPs. Ultraviolet-visible spectroscopy (UV-VIS) was used as the primary test for formation confirmation. TEM analysis confirmed the formation of two different shapes of ZnO NPs, nano-rods and near hexagonal NPs at varying reaction temperatures. The nano-rods were about 25.3 and 297.9 nm in diameter and in length, respectively while hexagonal NPs were about 29.3 nm. The UV-VIS absorption spectra of the two forms of ZnO NPs produced were 370 and 365 nm for nano-rods and hexagonal NPs, respectively. FT-IR analysis showed Zn-O stretching at 642 cm-1 and XRD confirmed the crystalline structure of the produced ZnO NPs. Thermogravimetric analysis; TGA was also used to confirm the thermal stability of ZnO NPs. The anti-tumor activities of the two prepared ZnO NPs forms were investigated by the MTT assay, which revealed an effective dose-dependent cytotoxic effect on A-431 cell lines. Both forms displayed considerable antioxidant potential, particularly the rod-shaped ZnO NPs, with an IC50 of 148.43 µg mL-1. The rod-shaped ZnO NPs were superior candidates for destroying skin cancer, with IC50 of 93.88 ± 1 µg mL-1 ZnO NPs. Thus, rod-shaped ZnO NPs are promising, highly biocompatible candidate for biological and biomedical applications. Furthermore, both shapes of phyto-synthesized NPs demonstrated effective antimicrobial activity against various pathogens. The outcomes highlight the potential of phyto-synthesized ZnO NPs as an eco-friendly alternative for water and wastewater disinfection.

Photocatalytic degradation of parabens: A comprehensive meta-analysis investigating the environmental remediation potential of emerging pollutant

The increasing prevalence of paraben compounds in the environment has given rise to concerns regarding their detrimental impacts on both ecosystems and human health. Over the past few decades, photocatalytic reactions have drawn significant attention as a method to accelerate the otherwise slow degradation of these pollutants. The current study aims to evaluate the current efficacy of the photocatalytic method for degrading parabens in aqueous solutions. An extensive literature review and bibliometric analysis were conducted to identify key research trends and influential areas in the field of photocatalytic paraben degradation. Studies were screened based on the predetermined inclusion and exclusion criteria, which led to 13 studies that were identified as being appropriate for the meta-analysis using the random effects model. Furthermore, experimental parameters such as pH, paraben initial concentration, catalyst dosage, light intensity, and contact time have been reported to have key impacts on the performance of the photocatalytic degradation process. A comprehensive quantitative assessment of these parameters was carried out in this work. Overall, photocatalytic techniques could eliminate parabens with an average degradation efficiency of >80 %. The findings of the Egger's test and the Begg's test were statistically not significant suggesting potential publication bias was not observed. This review provides a holistic understanding of the photocatalytic degradation of parabens and is anticipated to encourage more widespread adoption of photocatalytic procedures as a suitable method for the elimination of parabens from aqueous solutions, opening new avenues for future research in this direction.

Photocatalytic activity of silver nanoparticles@cellulose nanocomposites, from pistachio husk, in the toxic azo commercial dye degradation

In this work, an over-the-counter commercial dye, containing direct blue 151 in its composition, which is also discarded without any environmental regulation, was efficiency photodegraded using a green chemistry-synthesized nanocomposites type silver nanoparticles (AgNPs) supported on pistachio husk (PH). The green synthesis (GS) of the nanocomposites was carried out using the Anemopsis californica leaf extract (ExAc) as a reducing-stabilizing agent (AgNPs/ExAc-PH), for the first time. The presence of AgNPs on the nanocomposite surface was corroborated by field emission transmission electron microscope (FE-TEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The synthesized AgNPs/ExAc-PH has a bimodal size of 24 and 25 nm (4.86 % each) and a 0.72 % of AgNPs on its surface. AgNPs were adhered to the PH surface, through secondary bonds between the Ag and the cellulose of the PH. The optimum conditions, for efficient photocatalytic degradation, were 5 mg of nanocomposite, 3.18 × 10-2 M of NaBH4, natural sunlight, and stirring; this results in a photodegradation efficiency of 100 % almost instantaneously. Furthermore, it was shown that the dye degradation process is primarily due to the photocatalytic degradation of the dye, which occurs almost instantaneously.

Green synthesis of Ag nanoparticle supported on graphene oxide for efficient nitrite sensing in a water sample

Water is essential for conserving biodiversity, ecology, and human health, but because of population growth and declining clean water supplies, wastewater must be treated to meet demand. Nitrite is one of the contaminants in wastewater that is well-known. It is crucial to identify nitrite since it can be fatal to humans in excessive doses. Utilizing a straightforward and effective electrochemical sensor, nitrite in actual water samples may be determined electrochemically. The sensor is created by coating the surface of a GC electrode with a thin layer of graphene oxide (GO), followed by a coating of silver nanoparticles. The modified electrode reached a linear detection range of 1-400 µM. thus, the activity of the electrode was investigated at different pH values ranging from 4 to 10 to cover acidic to highly basic environments. However, the electrode recorded limit of detection (LOD) is equal to 0.084, 0.090, and 0.055 µM for pH 4, 7, and 10, respectively. Additionally, the electrode activity was utilized in tap water and wastewater that the LOD reported as 0.16 and 0.157 µM for tape water and wastewater, respectively.

Enhanced antibacterial properties and magnetic removal of Fe3O4/fenugreek seed gum/silver nanocomposites for water treatment

This study reports the synthesis, characterization, and antibacterial activity of a novel Fe3O4 nanocomposite coated with fenugreek seed gums and silver nanoparticles (AgNPs). To enhance the antibacterial properties of AgNPs and overcome the limitations of conventional methods for the production of three-component nanocomposites, a layer of natural polymer was used. Fenugreek seed gums (FSG) were used to coat Fe3O4 NPs to prevent their decomposition and to facilitate the release of silver nanoparticles in aqueous media. The Fe3O4/FSG/Ag nanocomposites were characterized and then the antibacterial activity of the nanocomposites was evaluated against two gram-negative and two gram-positive bacteria and compared with Fe3O4, Fe3O4/FSG, FSG, and AgNO3. The results showed that the Fe3O4/FSG/Ag nanocomposites had higher antibacterial activity than the other samples and could be easily removed from treated water by a powerful magnet without causing pollution in the environment. Overall, these findings suggest that the Fe3O4/FSG/Ag nanocomposites have potential applications in water treatment for their improved antibacterial properties and ease of removal.

Green and Sustainable Membranes: A review

Membranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers from some drawbacks, e.g., toxicity and fouling of contaminants, which makes the synthesis of green and sustainable membranes indeed safety-threatening. Typically, sustainability, non-toxicity, performance optimization, and commercialization are concerns centered on manufacturing green synthesized membranes. Thus, critical issues related to toxicity, biosafety, and mechanistic aspects of green-synthesized nano-membranes have to be systematically and comprehensively reviewed and discussed. Herein we evaluate various aspects of green nano-membranes in terms of their synthesis, characterization, recycling, and commercialization aspects. Nanomaterials intended for nano-membrane development are classified in view of their chemistry/synthesis, advantages, and limitations. Indeed, attaining prominent adsorption capacity and selectivity in green-synthesized nano-membranes requires multi-objective optimization of a number of materials and manufacturing parameters. In addition, the efficacy and removal performance of green nano-membranes are analyzed theoretically and experimentally to provide researchers and manufacturers with a comprehensive image of green nano-membrane efficiency under real environmental conditions.

Cost effective porous areca nut carbon nanospheres for adsorptive removal of dyes and their binary mixtures

Novel porous nanospheres from areca nuts (ACNPs) were synthesized via one-step pyrolysis without the use of any chemical treatment and the materials were used as adsorbents for the removal of cationic methylene blue (MB) and anionic methyl orange (MO) as well as their binary mixtures. Around, 6-7 tonnes of areca nut biowaste is generated every year which are then burnt due to their slow rate of decomposition resulting in higher carbon footprints. Biosorbents are generally a preferable alternative for dye adsorption but involve chemical modification for surface enhancement and complex sample treatment. In this work, ACNPs, were investigated for their efficiency in the raw form and were characterized by SEM, EDS, FTIR, XRD, and BET techniques before and after subjecting to the dye adsorption studies. The BET analysis of the adsorbents showed a high specific surface area of 693.8 m²/g when prepared at 1000 °C, while the N₂ adsorption-desorption plot showed type-IV isotherm, suggesting the microporous nature of the carbon matrix. Batch equilibrium studies showed the removal efficiency of >95% for both the dyes and their binary mixtures under the optimum conditions of 0.15 g/L dosage, 10 μM concentration and contact time of 70 min. Due to the synergistic effects of the binary dyes, higher removal efficiency of MB compared to MO was observed in the binary mixture. Adsorption results were tested using Langmuir, Freundlich, Temkin, Redlich-Peterson, and Elovich isotherms to assess the best fit of the models. The q_m value of MB was found to be 97.37 mg/g, while that of MO was 71.22 mg/g which is higher compared to individual dye components having lower values of 86.12 mg/g and 50.35 mg/g, respectively. Extended Langmuir and Jain and Snoeyink isotherms were used for binary data interpretation. The kinetic results showed good agreement with the Pseudo-second order equation, indicating internal diffusion. The possible mechanism involved electrostatic and ᴨ-ᴨ interactions between the dye molecules and ACNPs. This approach is comprehensible and cost effective and can be utilized for dye removal in textile industries.

Silver Nanoparticles for Waste Water Management

Rapidly increasing industrialisation has human needs, but the consequences have added to the environmental harm. The pollution caused by several industries, including the dye industries, generates a large volume of wastewater containing dyes and hazardous chemicals that drains industrial effluents. The growing demand for readily available water, as well as the problem of polluted organic waste in reservoirs and streams, is a critical challenge for proper and sustainable development. Remediation has resulted in the need for an appropriate alternative to clear up the implications. Nanotechnology is an efficient and effective path to improve wastewater treatment/remediation. The effective surface properties and chemical activity of nanoparticles give them a better chance to remove or degrade the dye material from wastewater treatment. AgNPs (silver nanoparticles) are an efficient nanoparticle for the treatment of dye effluent that have been explored in many studies. The antimicrobial activity of AgNPs against several pathogens is well-recognised in the health and agriculture sectors. This review article summarises the applications of nanosilver-based particles in the dye removal/degradation process, effective water management strategies, and the field of agriculture.

Kaolin-Supported Silver Nanoparticles as an Effective Catalyst for the Removal of Methylene Blue Dye from Aqueous Solutions

Water contamination by organic dyes has become a reason for severe environmental pollution and has been threatening the aquatic ecosystem. In this study, kaolin-supported silver nanoparticle (Ag-NP) composites were synthesized by a facile two-step adsorption-reduction method through the reduction of silver ions adsorbed onto locally available, inexpensive, and easily pretreated kaolin surfaces by using sodium borohydride (NaBH₄) for the catalytic degradation of methylene blue (MB) dye in aqueous solution. The morphology, structure, surface area, and interaction of the synthesized materials were investigated by scanning electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller, and Fourier transform infrared spectroscopy, respectively. Characterization results showed the successful growth of Ag-NPs on the kaolin surface. To understand the catalytic degradation performance of the catalyst, batch experiments were carried out using MB dye as a model dye. The catalytic reduction tests confirmed the importance of Ag-NPs and the high catalytic activities of the synthesized Ag-NPs/kaolin composite toward MB dye reduction. The degradation results indicated that the increased Ag-NP content on the kaolin surface through repeating cycles could effectively enhance the removal of MB dye from an aqueous solution. The kinetic analysis of the MB dye degradation of the catalyst has fitted the pseudo-first-order kinetic model. More than 97% removal efficiency was still present after five reuse cycles, demonstrating exceptional stability and reusability of the composite. In conclusion, the Ag-NPs supported kaolin (Ag-NPs/kaolin) composite was found to be a promising catalyst for the excellent catalytic activity to reduce a model dye MB from the aqueous solution in the presence of NaBH₄ with catalytic efficiency higher than 97% and a reduction rate constant, k _red, higher than 0.86 min^-1.

Wastewater treatment with nanomaterials for the future: A state-of-the-art review

Aquatic and terrestrial ecosystems are both threatened by toxic wastewater. The unique properties of nanomaterials are currently being studied thoroughly for treating sewage. Nanomaterials also have the advantage of being capable of removing organic matter, fungi, and viruses from wastewater. Advanced oxidation processes are used in nanomaterials to treat wastewater. Additionally, nanomaterials have a large effective area of contact due to their tiny dimensions. The adsorption and reactivity of nanomaterials are strong. Wastewater treatment would benefit from the development of nanomaterial technology. Second, the paper provides a comprehensive analysis of the unique characteristics of nanomaterials in wastewater treatment, their proper use, and their prospects. In addition to focusing on their economic feasibility, since limited forms of nanomaterials have been manufactured, it is also necessary to consider their feasibility in terms of their technical results. According to this study, the significant adsorption area, excellent chemical reaction, and electrical conductivity of nanoparticles (NPs) contribute to the successful treatment of wastewater.

Non-medicinal parts of safflower (bud and stem) mediated sustainable green synthesis of silver nanoparticles under ultrasonication: optimization, characterization, antioxidant, antibacterial and anticancer potential

The flower of safflower is widely used in Chinese herbal preparations and the non-medicinal parts have been applied to develop a sustainable green method, where AgNPs were generated using a mixture of leaf and stem after 12 h of incubation in the dark. In this study, we intend to improve the efficiency of the reduction reaction and optimize this green method by selecting other non-medicinal parts, such as the bud and the pure stem, evaluating the biosynthesis parameters and harnessing the assistance of ultrasonication. Visual observation and UV-vis spectroscopy confirmed that both safflower stem (SS) and bud (SB) mediated AgNPs (SS-AgNPs and SB-AgNPs, respectively) could be produced rapidly over time under ultrasonication. An alkaline solution could accelerate the formation of SS-AgNPs and SB-AgNPs with greater surface loads. SS-AgNPs and SB-AgNPs of small size could be obtained at pH 8.0 and 10.0, respectively. Large concentrations of SS and SB extract are also beneficial for forming AgNPs of small size. It is in acid and neutral solutions that monodispersed SS-AgNPs and SB-AgNPs can be generated. Characterization of selectively synthesized SS-AgNPs and SB-AgNPs demonstrated their spherical shape with the actual size below 30 nm covered by anions. Both SS-AgNPs and SB-AgNPs exhibited potent antioxidant and antibacterial activity. The MIC values of SS-AgNPs for S. aureus and E. coli were 12.5 and 25.0 μg mL^-1, respectively, slightly superior to SB-AgNPs. In an in vitro anticancer assay, both kinds of AgNPs show potent toxicity action against the SW620 cell line with IC₅₀ values of 5.4 and 10.6 μg mL^-1, respectively. However, only SS-AgNPs reveal an inhibitory action against the HeLa cell line, where the IC₅₀ is found to be 26.8 μg mL^-1. These results provide experimental proof that the assistance of ultrasonication and adjusting the process parameters are efficient methods for promoting the reduction reaction, and both SS and SB mediated AgNPs could serve as a promising antioxidant, antibacterial and anticancer agents.

Eco-Friendly Green Synthesis of Rubropunctatin Functionalized Silver Nanoparticles and Evaluation of Antibacterial Activity

In order to solve the problems of rubropunctatin insoluble in water and its low bioavailability, and explore the synthesis method of green silver nanoparticles, rubropunctatin was used as reducing agent and blocking agent, rubropunctatin-functionalized silver nanoparticles (R-AgNPs) were successfully synthesized. The distinctive absorption peak at 410 nm confirmed the formation of R-AgNPs. Zeta potential measurement showed excellent stability of R-AgNPs with negative values of -29.81 ± 0.37 mV. The results of TEM and XRD showed that the prepared R-AgNPs were round, well dispersed and crystallized with average particle size of 13.54 ± 0.42 nm. FT-IR and XPS studies show that functional groups are involved in R-AgNPs synthesis. The antibacterial activity of R-AgNPs was compared with commercial silver nanoparticles (AgNPs) by microdilution method. The results showed that R-AgNPs (MIC 7.81 μg/mL) has stronger antibacterial activity than commercial AgNPs. The bacteria morphology was observed by the live and dead (SYTO 9/PI) staining assay and SEM showed that the antibacterial effect of R-AgNPs was caused by the destruction of the bacterial cell membrane. Cytotoxicity of rubropunctatin-functionalized silver nanoparticles and commercial silver nanoparticles on mouse fibroblast 3T3 cells was assessed by CCK-8 assay. The results showed that the toxicity of rubropunctatin-functionalized silver nanoparticles to 3T3 cells was lower than that of commercial silver nanoparticles. In summary, synthesis of silver nanoparticles using rubropunctatin is a green synthesis method, and R-AgNPs is a potential antibacterial agent.