Simultaneous Fe(III) reduction and ammonia oxidation process in Anammox sludge

Biogeochemical cycles of iron: Processes, mechanisms, and environmental implications

The iron (Fe) biogeochemical cycle is critical for abiotic and biological environmental processes that overlap spatially and may compete with each other. The development of modern molecular biology technologies promoted the understanding of the electron transport mechanisms of Fe-cycling-related microorganisms. Recent studies have revealed a novel pathway for microaerophilic ferrous iron (Fe(II))-oxidizers in extracellular Fe(II) oxidation. In addition, OmcS, OmcZ, and OmcE nanowires on the cell surface have been shown to promote electron transfer between microorganisms and their environment. These processes affect the fate of pollutants in directly or indirectly ways, such as greenhouse gas emissions. In this review, these advances and the environmental implications of the Fe cycle process were discussed, with a particular focus on the mechanisms of intracellular or extracellular electron transport in microorganisms.

Novel insights into Feammox coupled with the NDFO: A critical review

Ammonium oxidation coupled with Fe(III) reduction, known as Feammox, and nitrate-dependent ferrous oxidation (NDFO) are two processes that can be synergistically achieved through the Fe(III)/Fe(II) cycle. This integrated approach enables the simultaneous removal of ammonia nitrogen (NH4+-N) and nitrate nitrogen (NO3--N) from wastewater, representing a novel method for complete nitrogen removal. This study presents a systematic and exhaustive examination of the Feammox-NDFO coupled process. An initial thorough exploration of the underlying mechanisms behind the coupling process is conducted, highlighting how the Fe(III)/Fe(II) cycle enables the concurrent occurrence of these reactions. Further, the functional microorganisms associated with and playing a crucial role in the Feammox-NDFO process are summarized. Next, the key influencing factors that govern the efficiency of the Feammox-NDFO process are explored. These include parameters such as pH, temperature, carbon source, iron source, nitrogen source, and various electron shuttles that may mediate electron transfer. Understanding the impact of these factors is essential for optimizing the process. The most recent trends and endeavors on the Feammox-NDFO coupling technology in wastewater treatment applications are also examined. This includes examining both laboratory-scale studies and field trials, highlighting their successes and challenges. Finally, an outlook is presented regarding the future advancement of the Feammox-NDFO technology. Areas of improvement and novel strategies that could further enhance the efficiency of simultaneous nitrogen removal from the iron cycle are discussed. In summary, this study aspires to offer a thorough comprehension of the Feammox-NDFO coupled process, with a focus on its mechanisms, influencing factors, applications, and prospects. It is anticipated to yield invaluable insights for the advancement of process optimization, thus sparking fresh ideas and strategies aimed at accomplishing the thorough elimination of nitrogen from wastewater via the iron cycle.

Magnetite addition reduces nitrite requirement for efficient anaerobic ammonium oxidation by facilitating mutualism of ANAMMOX and FEAMMOX bacteria

Partial nitrification (PN) is crucial for anaerobic ammonium oxidation (ANAMMOX), but faces challenges such as high energy demands and process control. Recent research has highlighted additives like magnetite as potential alternatives to conventional electron acceptors (O₂ and NO₂-) for enhancing ammonium (NH4+) oxidation with lower energy consumption. This study investigated the effect of adding 50 mg/L of magnetite to ANAMMOX reactors, resulting in improved nitrogen (N) removal efficiency. The magnetite-added ANAMMOX (M-ANA) reactor yielded N removal efficiencies of 71 %, 66 %, and 57 % for NH4+:NO2- molar ratios of 1:1.3, 1:0.8, and 1:0.5, respectively. The M-ANA reactor operated under a 0.5 mol lower NO2- concentration achieved similar performance to the control ANAMMOX (C-ANA) reactor operated with a theoretical amount of NO2-. Moreover, the M-ANA reactor showed the potential to remove NH4+ by 56 % without any NO2- supplementation. Metagenomic analysis showed that the addition of magnetite significantly improved the relative abundance of microorganisms involved in the FEAMMOX reaction, such as Fimbriimonas ginsengisoli and Pseudomonas stutzeri. It also facilitated positive mutualism between ANAMMOX and FEAMMOX reactions. In addition, M-ANA granules exhibited a dense and compact structure compared with C-ANA, and the presence of magnetite facilitated the formation of resilient granules. Notably, the useful protein (Heme C) concentration and specific microbial activity in the M-ANA reactor were 1.3 and 2.2 times higher than those in the C-ANA reactor. Overall, the results demonstrate that an appropriate amount of magnetite can enhance the N removal efficiency while reducing the energy input requirements and associated carbon emissions. These findings can guide the future development of carbon- and energy-neutral N removal processes.

Enhancing total nitrogen removal in constructed wetlands: A Comparative study of iron ore and biochar amendments

Efficient nitrogen removal in constructed wetlands (CWs) remains challenging when treating agricultural runoff with a low carbon-to-nitrogen ratio (C/N). However, using biochar, iron ore, and FeCl3-modified biochar (Fe-BC) as amendments could potentially improve total nitrogen (TN) removal efficiency in CWs, but the underlying mechanisms associated with adding these substrates are unclear. In this study, five CWs: quartz sand constructed wetland (Control), biochar constructed wetland, Fe-BC constructed wetland, iron ore constructed wetland, and iron ore + biochar constructed wetland, were built to compare their treatment performance. The rhizosphere microbial community compositions and their co-occurrence networks were analyzed to reveal the underlying mechanisms driving their treatment performance. The results showed that iron ore was the most efficient amendment, although all treatments increased TN removal efficiency in the CWs. Ammonia-oxidizing, heterotrophic denitrifying, nitrate-dependent anaerobic ferrous oxidizing (NAFO), and Feammox bacteria abundance was higher in the iron ore system and led to the simultaneous removal of NH4+-N, NO3--N, and NO2--N. Visual representations of the co-occurrence networks further revealed that there was an increase in cooperative mutualism (the high proportion of positive links) and more complex interactions among genera related to the nitrogen and iron cycle (especially ammonia-oxidizing bacteria, heterotrophic denitrifying bacteria, NAFO bacteria, and Feammox bacteria) in the iron ore system, which ultimately contributed to the highest TN removal efficiency. This study provides critical insights into how different iron ore or biochar substrates could be used to treat agricultural runoff in CWs.

Ultrasmall Mn-doped iron oxide nanoparticles with dual hepatobiliary and renal clearances for T1 MR liver imaging

Although magnetic nanoparticles demonstrate significant potential as magnetic resonance imaging (MRI) contrast agents, their negative contrasts, liver accumulation, and limited excretion hinder their application. Herein, we developed ultrasmall Mn-doped iron oxide nanoparticles (UMIOs) with distinct advantages as T1 MRI contrast agents. Exceptionally small particle sizes (ca. 2 nm) and magnetization values (5 emu gMn+Fe-1) of UMIOs provided optimal T1 contrast effects with an ideally low r2/r1 value of ∼1. Furthermore, the use of Mn as a dopant facilitated hepatocyte uptake of the particles, allowing liver imaging. In animal studies, UMIOs exhibited significantly enhanced contrasts for sequential T1 imaging of blood vessels and the liver, distinguishing them from conventional magnetic nanoparticles. UMIOs were systematically cleared via dual hepatobiliary and renal excretion pathways, highlighting their safety profile. These characteristics imply substantial potential of UMIOs as T1 contrast agents for the accurate diagnosis of liver diseases.

Microbially driven Fe-N cycle: Intrinsic mechanisms, enhancement, and perspectives

The iron‑nitrogen (FeN) cycle driven by microbes has great potential for treating wastewater. Fe is a metal that is frequently present in the environment and one of the crucial trace elements needed by microbes. Due to its synergistic role in the microbial N removal process, Fe goes much beyond the essential nutritional needs of microorganisms. Investigating the mechanisms behind the linked Fe-N cycle driven by microbes is crucial. The Fe-N cycle is frequently connected with anaerobic ammonia oxidation (anammox), nitrification, denitrification, dissimilatory nitrate reduction to ammonium (DNRA), Feammox, and simultaneous nitrification denitrification (SND), etc. Although the main mechanisms of Fe-mediated biological N removal may vary depending on the valence state of the Fe, their similar transformation pathways may provide information on the study of certain element-microbial interactions. This review offers a thorough analysis of the facilitation effect and influence of Fe on the removal of nitrogenous pollutants in various biological N removal processes and summarizes the ideal Fe dosing. Additionally, the synergistic mechanisms of Fe and microbial synergistic N removal process are elaborated, covering four aspects: enzyme activity, electron transfer, microbial extracellular polymeric substances (EPS) secretion, and microbial community interactions. The methods to improve biological N removal based on the intrinsic mechanism were also discussed, with the aim of thoroughly understanding the biological mechanisms of Fe in the microbial N removal process and providing a reference and thinking for employing Fe to promote microbial N removal in practical applications.

Performance of pilot-scale membrane aerated biofilm reactors integrated with anoxic nano-biotechnological reactor for domestic wastewater treatment

Membrane-aerated biofilm reactors (MABRs) have aroused increasing attention due to their excellent performance in treating wastewater, where the membranes behave as bio-carriers for microorganisms and bubbleless air diffusers. The MABR technology has not been fully commercialized due to reactor design and low total nitrogen (TN) removal efficiency at short hydraulic retention times (HRT). In this study, a hybrid system of MABR 1 integrated with an anoxic nano-biotechnological reactor filled with Granulated Nanoscale Oxyhydroxides of Fe (GNOF) media was evaluated to assess the improvement in nitrogen removal performance at 12, 10, and 4 h of HRTs. At the same time, another MABR (MABR 2) was operated individually at 12, 10, 8, 6, 4, and 2 h of HRTs to assess the influence of HRT on nitrogen removal performance. An enhancement in removal performance was reported in the hybrid MABR-GNOF, achieving the highest removal efficiencies of 74.3 ± 3.1% for ammonium nitrogen (NH₄⁺-N), 69.8 ± 2.1% for total nitrogen (TN), and 90.9 ± 1.7% for chemical oxygen demand (COD), at 12 h HRT. The hybrid MABR-GNOF system attained 18% higher nitrogen removal than the MABR-only system at 12 h of HRT. A simultaneous anoxic nitrification-denitrification and COD oxidation might be developed for the removal of COD, NH₄⁺-N, and TN from domestic wastewater by using GNOF as an electron acceptor in the hybrid MABR-GNOF unit. The findings in this study confirmed the possibility of integration of GNOF and MABR on a pilot scale and are promising for the application of this hybrid system on a full scale.

Electrochemical removal of ammonium nitrogen in high efficiency and N2 selectivity using non-noble single-atomic iron catalyst

Ammonia nitrogen (NH₄⁺-N) is a ubiquitous environmental pollutant, especially in offshore aquaculture systems. Electrochemical oxidation is very promising to remove NH₄⁺-N, but suffers from the use of precious metals anodes. In this work, a robust and cheap electrocatalyst, iron single-atoms distributed in nitrogen-doped carbon (Fe-SAs/N-C), was developed for electrochemical removal of NH₄⁺-N from in wastewater containing chloride. The Fe-SAs/N-C catalyst exhibited superior activity than that of iron nanoparticles loaded carbon (Fe-NPs/N-C), unmodified carbon and conventional Ti/IrO₂-TiO₂-RuO₂ electrodes. And high removal efficiency (> 99%) could be achieved as well as high N₂ selectivity (99.5%) at low current density. Further experiments and density functional theory (DFT) calculations demonstrated the indispensable role of single-atom iron in the promoted generation of chloride derived species for efficient removal of NH₄⁺-N. This study provides promising inexpensive catalysts for NH₄⁺-N removal in aquaculture wastewater.

New insight and enhancement mechanisms for Feammox process by electron shuttles in wastewater treatment - A systematic review

Ammonium oxidation coupled to Fe(III) reduction (Feammox) is a newly discovered iron-nitrogen cycle process of microbial catalyzed NH₄⁺ oxidation coupled with iron reduction. Fe(III) often exists in the form of insoluble iron minerals resulting in reduced microbial availability and low efficiency of Feammox. Electron shuttles(ESs) can be reversibly oxidized and reduced which has the potential to improve Feammox efficiency. This review summarizes the discovery process, electron transfer mechanism, influencing factors and driven microorganisms of Feammox, ang expounds the possibility and potential mechanism of ESs to enhance Feammox efficiency. Based on an in-depth analysis of the current research situation of Feammox for nitrogen removal, the knowledge gaps and future research directions including how to apply ESs enhanced Feammox to promote nitrogen removal in practical wastewater treatment have been highlighted. This review can provide new ideas for the engineering application research of Feammox and strong theoretical support for its development.

Simultaneous removal of COD and NH4+-N from domestic sewage by a single-stage up-flow anaerobic biological filter based on Feammox

In recent years, Feammox has made it possible to remove NH₄⁺-N under anaerobic conditions; however, its application in practical wastewater treatment processes has not been extensively reported. In this study, an up-flow anaerobic biological filter based on limonite (Lim-UAF) was developed to facilitate long-term and stable treatment of domestic sewage. Lim-UAF achieved the highest removal efficiency of chemical oxygen demand (COD) and NH₄⁺-N at a hydraulic retention time (HRT) of 24 h (Stage II). Specifically, the COD and NH₄⁺-N content decreased from 240.8 and 30.0 mg/L to about 7.5 and 0.35 mg/L, respectively. To analyze the potential nitrogen removal mechanism, the Lim-UAF was divided into three layers according to the height of the reactor. The results showed that COD and NH₄⁺-N removal had remarkable characteristics in Lim-UAF. More than 55.0% of influent COD was removed in the lower layer (0-30 cm) of Lim-UAF, while 60.2% of NH₄⁺-N was removed in the middle layer (30-60 cm). Microbial community analysis showed that the community structure in the middle and upper layers (60-90 cm) was relatively similar, but quite different from that of the lower layer. Heterotrophic bacteria were dominant in the lower layer, whereas iron-reducing and iron-oxidizing bacteria were enriched in the upper and middle layers. The formation of secondary minerals (siderite and Fe(OH)₃) indicated that the Fe(III)/Fe(II) redox cycle occurred in Lim-UAF, which was triggered by the Feammox and NDFO processes. In summary, limonite was used to develop a single-stage wastewater treatment process for simultaneously removing organic matter and NH₄⁺-N, which has excellent application prospects in domestic sewage treatment.

Low strength wastewater anammox start-up and stable operation by inoculating sponge-iron sludge: Cooperation of biological iron and iron bacteria

The application of anaerobic ammonium oxidation (Anammox) technology in low-strength wastewater treatment still faces difficult in-situ start-ups and unstable operations. Sponge-iron sludge (R1) was used as a novel inoculum to provide a promising solution. Conventional activated sludge (R0) was used as the control. However, little is known about the feasibility and performance during the start-up and operation of Anammox combined with biological iron and iron bacteria in an iron sludge system. Anammox was successfully started both in R1 (87 days) and R0 (89 days) with a low-strength influent (with a nitrogen loading rate (NLR) of 43.64 ± 0.41 g N/(m3⋅d)). During long-term operation, the R0 nevertheless produced higher nitrates (9.7 ± 0.1 mg/L) than expected. In contrast, R1 presented no excess nitrate production (2.1 ± 0.06 mg/L). The total inorganic nitrogen (TIN) removal efficiency increased from 78.2 ± 7.1% in R0 to 86.1 ± 4.3% in R1. The iron sludge in R1 was divided equally into three parts and three different nitrogen-feeding methods were used over the 34 days of operation, as follows: first using a mixture of ammonium (27.15 ± 1.0 mg/L) and nitrite (32.7 ± 1.7 mg/L), then only ammonium (27.15 ± 1.0 mg/L) and lastly only nitrite (32.7 ± 1.7 mg/L) as the influent. R1 was a coupled system composed of Anammox, Feammox, and NOx--dependent Fe(II) oxidation (NDFO). The contribution of Feammox and NDFO to TIN removal was 27.1 ± 1.2% and 31.9 ± 0.7%. However, Anammox was the primary nitrogen transformation pathway. X-ray diffraction (XRD) analysis shows that iron hydroxide (Fe(OH)3) and iron oxide hydroxide (FeOOH) were generated in R1. The produced Fe(OH)3 and FeOOH were capable of participating in Feammox and formed a Fe(II)/Fe(III) cycle which further removed nitrogen. Therefore, a highly stable and impressive nitrogen removal performance was demonstrated in the iron sludge Anammox system under the cooperation of biological iron and iron bacteria. The study considered the enrichment of norank_c_OM190, Desulfuromonas, and Thiobacillus and their contribution to the Anammox, Feammox, and NDFO processes, respectively. This study provides a new perspective for the start-up and stable operation of low-strength wastewater Anammox engineering applications.

Recent progress in applications of Feammox technology for nitrogen removal from wastewaters: A review

Feammox process is crucial for the global nitrogen cycle and has great potentials for the treatment of low COD/NH₄⁺-N wastewaters. This work provides a systematic and comprehensive overview of the Feammox process. Specifically, underlying mechanisms and functional microbes mediating the Feammox process are summarized in detail. And key influencing factors including pH, temperature, dissolved oxygen, organic carbon, source of Fe(III) as well as various electron shuttles are discussed. Additionally, recent development trends and attempts of the Feammox technology in wastewater treatment applications are reviewed, and perspectives for future development are presented. A thorough review of the recent progress in Feammox process is expected to provide valuable information for further process optimization, which is helpful to achieve a more economical operation and better nitrogen removal performance in future field applications.

Evidence for the occurrence of Feammox coupled with nitrate-dependent Fe(II) oxidation in natural enrichment cultures

Feammox is a newly discovered process of anaerobic ammonium oxidation driven by Fe(III) reduction. Nitrate-dependent Fe(II) oxidation (NDFO) is the coupling of Fe(II) oxidation and nitrate reduction to produce N₂ under anaerobic conditions. It has not been reported whether the coupling of the two reactions exists in natural enrichment. In this study, enrichment culture experiments were carrired out to prove the occurrence of Feammox with NDFO. The results indicated that the nitrogen and iron cycle were formed during natural enrichment cultures, including Fe(III) reduction and NH₄⁺-N was oxidation to NO₃^--N, NO₂^--N and N₂, Fe(III) and Fe(II) were cyclically formed, and Fe(II) was oxidized with NO₃^--N reduced to N₂. The removal efficiencies of ammonium nitrogen and total nitrogen in the incubation were about 92.9% and 20% respectively. Organic carbon experiments indicate that sodium acetate can promote the initial NO₃^--N removal and a low concentration of organic carbon limited the NDFO process because iron-oxidizing bacteria are mixotrophic microorganisms. The added 9,10-anthraquinone-2,6-disulfonate (AQDS) in the later stage can promote NDFO to remove nitrate, thereby increasing the TN removal efficiency to 50%. ¹⁵N-isotope tracer incubations provided direct evidence for the occurrence of Feammox coupled to NDFO, with rates producing ³⁰N₂ of Feammox (0.024-0.0288 mg N·L^-1·d^-1) and NDFO (0.0465-0.0833 mg N·L^-1·d^-1) in three groups (Wetland/Wheat soil/Sediment). 16S rRNA sequencing further demonstrated that Pseudomonas, Rhodanobacter, Acinetobacter and Thermomonas were the dominant generas among the enrichment cultures, and these bacteria belonged to FeOB and FeRB, which may further promote Feammox coupled to NDFO in the cultivation system.

Phylogenomic Evidence for the Origin of Obligate Anaerobic Anammox Bacteria Around the Great Oxidation Event

The anaerobic ammonium oxidation (anammox) bacteria can transform ammonium and nitrite to dinitrogen gas, and this obligate anaerobic process accounts for up to half of the global nitrogen loss in surface environments. Yet its origin and evolution, which may give important insights into the biogeochemistry of early Earth, remain enigmatic. Here, we performed a comprehensive phylogenomic and molecular clock analysis of anammox bacteria within the phylum Planctomycetes. After accommodating the uncertainties and factors influencing time estimates, which include implementing both a traditional cyanobacteria-based and a recently developed mitochondria-based molecular dating approach, we estimated a consistent origin of anammox bacteria at early Proterozoic and most likely around the so-called Great Oxidation Event (GOE; 2.32-2.5 Ga) which fundamentally changed global biogeochemical cycles. We further showed that during the origin of anammox bacteria, genes involved in oxidative stress adaptation, bioenergetics, and anammox granules formation were recruited, which might have contributed to their survival on an increasingly oxic Earth. Our findings suggest the rising levels of atmospheric oxygen, which made nitrite increasingly available, was a potential driving force for the emergence of anammox bacteria. This is one of the first studies that link the GOE to the evolution of obligate anaerobic bacteria.

Achieving Ammonium Removal Through Anammox-Derived Feammox With Low Demand of Fe(III)

Feammox-based nitrogen removal technology can reduce energy consumption by aeration and emission of carbon dioxide. However, the huge theoretical demand for Fe(III) becomes a challenge for the further development of Feammox. This study investigated an anammox-derived Feammox process with an intermittent dosage of Fe2O3 and proposed a novel approach to reduce the Fe(III) consumption. The results showed that anammox genera Candidatus Brocadia and Candidatus Kuenenia in the seed anammox sludge significantly decreased after cultivation. The formation of N2 was the dominating pathway in Feammox while that of nitrite and nitrate could be neglected. Batch tests showed that specific Feammox activity of ammonium oxidation was 1.14–9.98 mg N/(g VSS·d). The maximum removal efficiency of ammonium reached 52.3% in the bioreactor with a low dosage of Fe(III) which was only 5.8% of the theoretical demand in Feammox. The removal of ammonium was mainly achieved through Feammox, while partial nitrification/anammox also played a role due to the non-power and unintentional oxygen leakage. The super-low oxygen also responded to the low demand of Fe(III) in the bioreactor because it could trigger the cycle of Fe(III)/Fe(II) by coupling Feammox and chemical oxidation of Fe(II) to Fe(III). Therefore, anammox-derived Feammox can achieve the removal of ammonium with low Fe(III) demand at super-low oxygen.

Use of sponge iron dosing in baffled subsurface-flow constructed wetlands for treatment of wastewater treatment plant effluents during autumn and winter

Sponge iron (SI) is widely used in water treatment. As effluents from wastewater treatment plant (WWTP) require advanced treatment methodology, three forms of constructed wetlands (CWs): wetlands with sponge iron (SI), copper sulfate modified sponge iron (Cu/SI), and sponge iron coupled with solid carbon sources (C/SI), have been investigated in this paper for the removal effects of organic matter and nutrients in WWTP effluents, and the corresponding mechanisms have been analyzed. The results showed the effect of baffled subsurface-flow constructed wetland (BSFCW) with SI dosing to purify the WWTP effluents after the stable operation. The water flow of this BSFCW is the repeated combination of upward flow and downward flow, which can provide a longer treatment pathway and microbial exposure time. The average removal rates of total inorganic nitrogen (TIN) were 27.80%, 30.17%, and 44.83%, and the average removal rates of chemical oxygen demand (COD) were 19.96%, 23.73%, and 18.38%. The average removal rates of total phosphorus (TP) were 85.94%, 82.14%, and 83.95%. Cu/SI improved the dissolution of iron, C/SI improved denitrification, and a winter indoor temperature retention measure was adopted to increase the effectiveness of wetland treatment during the winter months. After comprehensively analyzing X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and two-dimensional numerical simulation diagrams, a plausible conjecture that microbes use electrons from SI for autotrophic denitrification is presented. Moreover, the stress effect of wetlands dosed with SI on plants decreased stepwise along the course since C/SI used on wetlands had less impact on plant stress.

Removal of microcystin (MC-LR) in constructed wetlands integrated with microbial fuel cells: Efficiency, bioelectricity generation and microbial response

Microcystins (MCs) pollution caused by cyanobacteria harmful blooms (CHBs) has posed short- and long-term risks to aquatic ecosystems and public health. Constructed wetlands (CWs) have been verified as an effective technology for eutrophication but the removal performance for MCs did not achieve an acceptable level. CWs integrated with microbial fuel cell (MFC-CWs) were developed to intensify the nutrient and Microcystin-LR (MC-LR) removal efficiencies in this study. The results indicated that closed-circuit MFC-CWs (T1) exhibited a better NO₃^--N, NH₄⁺-N, TP and MC-LR removal efficiency compared to that of open-circuit MFC-CWs (CK, i.e., traditional CWs). Therein, a MC-LR removal efficiency of greater than 95% was observed in both trials in T1. The addition of sponge iron to the anode layer of MFC-CWs (T2) improved only the NO₃^--N removal and efficiency bioelectricity generation performance compared to T1, and the average effluent MC-LR concentration of T2 (1.14 μg/L) was still higher than the provisional limit concentration (1.0 μg/L). The microbial community diversity of T1 and T2 was simplified compared to CK. The relative abundance of Sphingomonadaceae possessing the degradation capability for MCs increased in T1, which contributed to the higher MC-LR removal efficiency compared to CK and T2. While the relative abundance of electrochemically active bacteria (EAB) (i.e., Desulfuromonadaceae and Desulfomicrobiaceae) in the anode of T2 was promoted by the addition of sponge iron. Overall, this study suggests that integrating MFC into CWs provides a feasible intensification strategy for eutrophication and MCs pollution control.

Effects and mechanisms of constructed wetlands with different substrates on N2O emission in wastewater treatment

Nitrous oxide (N₂O) emissions from constructed wetlands (CWs) are accompanying problems and have attracted much attention in recent years. CWs filled with different substrates (gravel, biochar, zeolite, and pyrite) were constructed to investigate the nitrogen removal performance and N₂O emissions, which named C-CWs, B-CWs, Z-CWs, and P-CWs, respectively. C-CWs showed the poorest nitrogen removal performance in all CWs. Although B-CWs exhibited the highest fluxes of N₂O emissions, the percentage of N₂O emissions in nitrogen removal (0.15%) was smaller than that of C-CWs (0.18%). In addition, microbiological analysis showed that compared with C-CWs, CWs filled with biochar, zeolite, and pyrite had higher abundance of nitrifying and denitrifying microorganisms and lower abundance of N₂O producing bacteria. In conclusion, biochar, zeolite, and pyrite were more favorable kinds of substrate than the conventional substrates of gravel for the nitrogen removal and reduction of N₂O emissions from CWs.

Insight of bacteria and archaea in Feammox community enriched from different soils

Anaerobic ammonium oxidation coupled to Fe(III) reduction, known as Feammox, is a newly discovered nitrogen-cycling process, which serves an important role in the pathways of nitrogen loss in the environment. However, the specific types of microorganisms involved in Feammox currently remain unclear. In this study, we selected two groups of soil samples (paddy and mine), from considerably different habitats in South China, to acclimate Feammox colonies. The Paddy Group had a shorter lag period than the Mine Group, while the ammonium transformation rate was nearly equal in both groups in the mature period. The emergence of the Feammox activity was found to be associated with the increased abundance of iron-reducing bacteria, especially Clostridium_sensu_stricto_12, Desulfitobacterium, Thermoanaerobaculum, Anaeromyxobacter and Geobacter. Ammonium oxidizing archaea and methanogens were dominant among the known archaea. These findings extend our knowledge of the microbial community composition of the potential Feammox microbes from soils under different environmental conditions, which broadens our understanding of this important Fe/N transformation process.

Novel biotechnologies for nitrogen removal and their coupling with gas emissions abatement in wastewater treatment facilities

Wastewaters contaminated with nitrogenous pollutants, derived from anthropogenic activities, have exacerbated our ecosystems sparking environmental problems, such as eutrophication and acidification of water reservoirs, emission of greenhouse gases, death of aquatic organisms, among others. Wastewater treatment facilities (WWTF) combining nitrification and denitrification, and lately partial nitrification coupled to anaerobic ammonium oxidation (anammox), have traditionally been applied for the removal of nitrogen from wastewaters. The present work provides a comprehensive review of the recent biotechnologies developed in which nitrogen-removing processes are relevant for the treatment of both wastewaters and gas emissions. These novel processes include the anammox process with alternative electron acceptors, such as sulfate (sulfammox), ferric iron (feammox), and anodes in microbial electrolysis cells (anodic anammox). New technologies that couple nitrate/nitrite reduction with the oxidation of methane, H₂S, volatile methyl siloxanes, and other volatile organic compounds are also described. The potential of these processes for (i) minimizing greenhouse gas emissions from WWTF, (ii) biogas purification, and (iii) air pollution control is critically discussed considering the factors that might trigger N₂O release during nitrate/nitrite reduction. Moreover, this review provides a discussion on the main challenges to tackle towards the consolidation of these novel biotechnologies.

A promising destiny for Feammox: From biogeochemical ammonium oxidation to wastewater treatment

Ammonium is one of the most common forms of nitrogen that exists in wastewater, and it can cause severe pollution when it is discharged without treatment. New technologies must be developed to effectively remove ammonium because conventional nitrification-denitrification methods are limited by the lack of organic carbon. Anaerobic ammonium oxidation coupled to Fe(III) reduction is known as Feammox, and is a recently discovered nitrogen cycling process. Feammox can proceed under autotrophic or anaerobic conditions and effectively transforms ammonium to stable, innocuous dinitrogen gas, using the ferric iron as an electron acceptor. This method is cost-effective, environmentally friendly, and conducive to joint application with other nitrogen removal reactions in low-C/N municipal wastewater treatments. This review provides a comprehensive survey of Feammox mechanistic investigations and presents studies regarding the functional microorganism colonies. The potential for Feammox to be applied for the removal of nitrogen from various polluted water sources and the combination of the Feammox process with other frontier environmental technologies are also discussed. In addition, future perspectives for removing ammonium using Feammox are presented.

The effects of magnetite on anammox performance: Phenomena to mechanisms

Low temperature is adverse to anaerobic ammonium oxidation (anammox) reaction while proper Fe addition can enhance anammox performance. Therefore, batch assays were conducted to investigate the potential effects of magnetite (100 μm, 20 μm and 200 nm) on anammox performance which were achieved from the reactor operated at 10-25 °C. After 3 runs, the results indicated that nano-scale magnetite improved the nitrogen elimination significantly. The specific anammox activity (SAA) of the group with nano-magnetite amendments was greater than the other groups after 3 runs (13.5, 12.9, 14.3, 15.4 and 15.7 mgTN/(gVSS·h)), reaching 18.0 mgTN/(gVSS·h). The distribution of magnetite in the granules were then analyzed using X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS). The results indicated that nano-magnetite was more feasible to attached to the surface of the granules which might accelerate the release of Fe(II) or Fe(III) to enhance anammox performance.

Anammox Bacteria Are Potentially Involved in Anaerobic Ammonium Oxidation Coupled to Iron(III) Reduction in the Wastewater Treatment System

Anaerobic ammonium oxidation coupled to nitrite reduction (termed as Anammox) was demonstrated as an efficient pathway to remove nitrogen from a wastewater treatment system. Recently, anaerobic ammonium oxidation was also identified to be linked to iron(III) reduction (termed Feammox) with dinitrogen, nitrite, or nitrate as end-product, reporting to enhance nitrogen removal from the wastewater treatment system. However, little is known about the role of Anammox bacteria in the Feammox process. Here, slurry from wastewater reactor amended with ferrihydrite was employed to investigate activity of Anammox bacteria in the Feammox process using the ¹⁵N isotopic tracing technique combined with 16S rRNA gene amplicon sequencing. A significantly positive relationship between rates of ¹⁵N₂ production and iron(III) reduction indicated the occurrence of Feammox during incubation. Relative abundances of Anammox bacteria including Brocadia, Kuenenia, Jettenia, and unclassified Brocadiaceae were detected with low relative abundances, whereas Geobacteraceae dominated in the treatment throughout the incubation. ¹⁵N₂ production rates significantly positively correlated with relative abundances of Geobacter, unclassified Geobacteraceae, and Anammox bacteria, revealing their contribution to nitrogen generation via Feammox. Overall, these findings suggested Anammox bacteria or cooperation between Anammox bacteria and iron(III) reducers serves a potential role in Feammox process.

Effect of Fe3+ on the sludge properties and microbial community structure in a lab-scale A2O process

During biological wastewater treatment, ferric salt (Fe³⁺) usually serves as an inorganic flocculant to improve the agglomeration and sedimentation of suspended solids, and thus the removal efficiency of pollutants to meet the increasing strictly regulated wastewater discharge standards. In this study, we investigated the effects of Fe³⁺ on the removal efficiencies of pollutants, sludge properties, dominant flora and metabolic pathways of bacterial community in a classical anaerobic-anoxic-oxic (A²O) process. The results showed that a Fe³⁺ concentration lower than 10 mg·L^-1 could improve the removal efficiencies of chemical oxygen demand (COD) and total nitrogen (TN), while an inhibition effect was exerted at concentration higher than 10 mg·L^-1. The maximum removal efficiencies of COD and TN were 97% and 89%, respectively, under the critical Fe³⁺ concentration of 10 mg·L^-1. Total phosphorous (TP) removal was constantly positively correlated with Fe³⁺ concentration, due to the enhanced adsorption of phosphorus on activated sludge with the increase of surface roughness. Thauera displayed the highest relative abundance, and certain bacteria in Proteobacteria, Dehloromonas and Candidatus-Competibacter exhibited good adaptability to high concentration of Fe³⁺. In the context of metabolic collaterals, the most abundant functional gene families were identified to be Carbohydrate Metabolism, Amino Acid Metabolism, Cell Motility, Membrane Transport, and Replication and Repair. This study provides an extensive mechanistic insight into the impact of Fe³⁺ on the A²O process, which is of fundamental significance to exploit the contributions of inorganic salts to biological wastewater treatment.

An evolving view on biogeochemical cycling of iron

Biogeochemical cycling of iron is crucial to many environmental processes, such as ocean productivity, carbon storage, greenhouse gas emissions and the fate of nutrients, toxic metals and metalloids. Knowledge of the underlying processes involved in iron cycling has accelerated in recent years along with appreciation of the complex network of biotic and abiotic reactions dictating the speciation, mobility and reactivity of iron in the environment. Recent studies have provided insights into novel processes in the biogeochemical iron cycle such as microbial ammonium oxidation and methane oxidation coupled to Fe(III) reduction. They have also revealed that processes in the biogeochemical iron cycle spatially overlap and may compete with each other, and that oxidation and reduction of iron occur cyclically or simultaneously in many environments. This Review discusses these advances with particular focus on their environmental consequences, including the formation of greenhouse gases and the fate of nutrients and contaminants.

Biostimulation of a marine anammox bacteria-dominated bioprocess by Co(II) to treat nitrogen-rich, saline wastewater

The biostimulation of a marine anammox bacteria (MAB)-dominated bioprocess with Co(II) was studied in a sequencing batch reactor (SBR) treating nitrogen-rich saline wastewater at 15 °C. The low Co(II) load of 0.0015 kgCo²⁺_added/(m^3.d) had little effect on the removal of nitrogen. The nitrite removal rate (NRR), ammonia removal rate (ARR), and specific anammox activity (SAA) reached 0.73 kg/(m³·d), 0.59 kg/(m³·d), and 0.23 kg/(kg·d), respectively, under the Co(II) load of 0.009 kgCo²⁺_added/(m^3.d). However, the loadings of Co(II) at 0.024-0.03 kgCo²⁺_added/(m^3.d) negatively affected the activity of MAB. Besides, the values of ΔNO₂^--N/ΔNH₄⁺-N (1.15-1.29) were lower than the theoretical ratio values (around 1.32) likely because of the marine commamox process. The removal of nitrogen from nitrogen-rich saline wastewater was achieved by the synergy between Candidatus Scalindua (27.11%) and Candidatus Kuenenia (9.55%). The nitrogen removal with Co(II) addition could be well described by a modified Logistic model.

Using modern low-oxygen marine ecosystems to understand the nitrogen cycle of the Paleo- and Mesoproterozoic oceans

During the productive Paleoproterozoic (2.4-1.8 Ga) and less productive Mesoproterozoic (1.8-1.0 Ga), the ocean was suboxic to anoxic and multicellular organisms had not yet evolved. Here, we link geologic information about the Proterozoic ocean to microbial processes in modern low-oxygen systems. High iron concentrations and rates of Fe cycling in the Proterozoic are the largest differences from modern oxygen-deficient zones. In anoxic waters, which composed most of the Paleoproterozoic and ~40% of the Mesoproterozoic ocean, nitrogen cycling dominated. Rates of N₂ production by denitrification and anammox were likely linked to sinking organic matter fluxes and in situ primary productivity under anoxic conditions. Additionally autotrophic denitrifiers could have used reduced iron or methane. 50% of the Mesoproterozoic ocean may have been suboxic, promoting nitrification and metal oxidation in the suboxic water and N₂ O and N₂ production by partial and complete denitrification in anoxic zones in organic aggregates. Sulfidic conditions may have composed ~10% of the Mesoproterozoic ocean focused along continental margins. Due to low nitrate concentrations in offshore regions, anammox bacteria likely dominated N₂ production immediately above sulfidic zones, but in coastal regions, higher nitrate concentrations probably promoted complete S-oxidizing autotrophic denitrification at the sulfide interface.

Performance, microbial community and inhibition kinetics of long-term Cu2+ stress on an air-lift nitritation reactor with self-recirculation

Biological nitrogen removal process could be affected due to the presence of heavy metals owing to their toxicity and accumulation in the sludge. In this study, the impact of Cu²⁺ shock on a long-term nitritation operation was investigated in an air-lift reactor with self-recirculation. Both the dynamics of microbial community and inhibition kinetics under Cu²⁺ stress were ascertained. The results showed that Cu²⁺ exerted severe inhibition on nitritation performance of an air-lift reactor (ALR) at 25 mg/L. The corresponding NH₄⁺-N removal efficiency decreased to below 50%, which was mainly due to the variation of microbial community structure, especially the inhibition of nitrifiers like Nitrosomonas (the relative abundance decreased from 30% to 1% after Cu²⁺ inhibition). Kinetic parameters were obtained and compared after fitting the Haldane model. The long-term Cu²⁺ stress on the ALR aggravated the ammonium affinity and the resistance to substrate self-inhibition of the nitritation sludge, but reduced the resistance to Cu²⁺ inhibition. Furthermore, Cu²⁺ acted as uncompetitive inhibitor on nitritation process. Our results provide new insights into the nitritation characteristics under long-term Cu²⁺ stress.

Low temperature advanced nitrogen and sulfate removal from landfill leachate by nitrite-anammox and sulfate-anammox

Under anaerobic conditions, ammonium (NH₄⁺) can react with nitrite (NO₂^-) and sulfate (SO₄^2-), termed nitrite-anammox (NirAnammox) and sulfate-anammox (Sulfammox), respectively. However, how to remove NH₄⁺ and SO₄^2- together from leachate is unclear. In this study, NirAnammox and Sulfammox cooperatively achieved nitrogen and sulfate removal from leachate using a biological process at low temperature (14-15 °C). NH₄⁺, total nitrogen (TN), and SO₄^2- concentrations in the influent were 610-700, 670-900, 1870-1920 mg/L, respectively, and 10 ± 1, 35 ± 3, and 897.7 ± 10 mg/L, respectively, in the effluent. Sulfammox, and NirAnammox (including partial nitrification) removed 44.2% and 35.46% of the NH₄⁺, respectively. Therefore, because leachate contains high concentrations of NH₄⁺ and SO₄^2-, NirAnammox and Sulfammox can easily occur together, with nitrogen removal by Sulfammox being more than NirAnammox. The relative abundance of dominant bacteria of the Sulfammox were 10-20 times that of Candidatus Kuenenia (NirAnammox) in each reactor. Organic matter negatively affected NirAnammox, but not Sulfammox. Dissolved oxygen negatively affected both.

Promoting the nitrogen removal of anammox process by Fe-C micro-electrolysis

In this study, a process that combines iron-carbon micro-electrolysis (IC-ME) with the anammox process was successfully established for promoting nitrogen removal, especially the removal of nitrate by-product. Compared with the conventional anammox process, the average total nitrogen removal efficiency of the combined system increased from 64.6% to 90.2% and 83.8% when the system was effectively operated for 4 days (Phase 2) and 13 days (Phase 3), respectively. In this combined system, IC-ME played a dual role: 1) converting the nitrate to ammonia as the nitrogen substrate for further degradation, and 2) producing Fe²⁺, Fe³⁺ and H₂ for the nitrogen removal processes of NH₄⁺ oxidation with Fe³⁺ reduction (Feammox), nitrate-dependent Fe²⁺ oxidation (NDFO), and denitrification, in addition to the anammox process. Microbial analysis using 16S rRNA high-throughput sequencing revealed Candidatus Kuenenia and Candidatus Brocadia as the major anammox genera, accounting for 1.01% and 0.15%, respectively.

Simultaneous removal of ammonia and nitrate by coupled S0-driven autotrophic denitrification and Anammox process in fluorine-containing semiconductor wastewater

To achieve the simultaneous removal of NH₄⁺-N and NO₃^--N in F^--containing semiconductor wastewater by coupled S⁰-driven autotrophic denitrification and Anammox process, the effect of variable F^- concentration on the Anammox process was investigated by batch experiments. The denitrifying ammonium oxidation (Deamox) reactor was then started-up to explore the feasibility of the coupling of Anammox and sulfur autotrophic denitrification (SADN) for the treatment of semiconductor wastewater. Short-term variation of F^- concentration has an obviously effect on the activity of Anammox sludge, but didn't affect the nitrogen conversion rate. The activity of Anammox obviously decreased after long-term operation of the Deamox reactor when influent F^- concentrations reached 552 mg/L. The sensitivity of Anammox bacteria to F^- concentration is stronger than that of SADN bacteria. Total nitrogen removal efficiency of 98% and total nitrogen removal rate of 4.11 kg/(m³·d) were achieved in the Deamox reactor, when the F^- was pre-treated by calcium ions. Moreover, the high-throughput 16S rRNA gene sequence analysis indicated that variation in F^- concentrations could influence the structure and functional of microbial communities in the Deamox process. Candidatus Kuenenia, Thiobacillus and Sulfurimonas were main functional bacteria that achieved symbiotic.

Overcoming challenges in mainstream Anammox applications: Utilization of nanoscale zero valent iron (nZVI)

Although Anammox process is a proven technology for sidestream nitrogen removal, the process faces challenges for mainstream applications in sewage treatment plants (STPs). The aim of this study was to investigate the effect of zero valent iron nanoparticles (nZVI) on process performance to eliminate confronts for mainstream applications. An SBR (sequencing batch reactor) system was fed with various nZVI concentrations (0.04-5000 ppb) within 310 days of operation. Ammonium (NH₄⁺-N) and nitrite (NO₂^--N) removal rates showed 58% increase in daily measurements and 73% increase in instant measurements. Specific Anammox Activity (SAA) was noticeably higher on the days the system was exposed to nZVI compared to the unexposed days. EPS secretion, which enhances granulation of Anammox bacteria was favored by nZVI. Despite lower sludge retention time (SRT) values, the fraction of Anammox bacteria in total bacteria reached to 91-92% implying a boosting effect of nZVI on growth rate of Anammox bacteria. High Resolution Melting (HRM) analyses showed that four distinct clades were present in the reactor.

New directions in biological nitrogen removal and recovery from wastewater

This review summarizes strategies for biological nitrogen removal (BNR) and recovery from wastewater. The most commonly used BNR technology nitrification/denitrification is also the most energy intensive, even though there are lower energy options, including nitritation/denitritation and more efficient partial nitritation/Anammox; the latter is well demonstrated for side-stream treatment and progressing toward mainstream applications. Nitrogen recovery can be done through cell assimilation with phototrophs, but bottlenecks with solids separation and space requirements limit applications to tertiary treatment. Whereas, microbial electrochemical cells are energy efficient at recovering nitrogen from side streams, but not capable of achieving low effluent levels. The combined strengths of these emerging approaches will improve wastewater nitrogen removal by reducing energy consumption, minimizing effluent nitrogen, and maximizing nitrogen recovery.

The hunt for the most-wanted chemolithoautotrophic spookmicrobes

Microorganisms are the drivers of biogeochemical methane and nitrogen cycles. Essential roles of chemolithoautotrophic microorganisms in these cycles were predicted long before their identification. Dedicated enrichment procedures, metagenomics surveys and single-cell technologies have enabled the identification of several new groups of most-wanted spookmicrobes, including novel methoxydotrophic methanogens that produce methane from methylated coal compounds and acetoclastic 'Candidatus Methanothrix paradoxum', which is active in oxic soils. The resultant energy-rich methane can be oxidized via a suite of electron acceptors. Recently, 'Candidatus Methanoperedens nitroreducens' ANME-2d archaea and 'Candidatus Methylomirabilis oxyfera' bacteria were enriched on nitrate and nitrite under anoxic conditions with methane as an electron donor. Although 'Candidatus Methanoperedens nitroreducens' and other ANME archaea can use iron citrate as an electron acceptor in batch experiments, the quest for anaerobic methane oxidizers that grow via iron reduction continues. In recent years, the nitrogen cycle has been expanded by the discovery of various ammonium-oxidizing prokaryotes, including ammonium-oxidizing archaea, versatile anaerobic ammonium-oxidizing (anammox) bacteria and complete ammonium-oxidizing (comammox) Nitrospira bacteria. Several biogeochemical studies have indicated that ammonium conversion occurs under iron-reducing conditions, but thus far no microorganism has been identified. Ultimately, iron-reducing and sulfate-dependent ammonium-oxidizing microorganisms await discovery.