In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

Non-radical activation of persulfate with Bi2O3/BiO1.3I0.4 for efficient degradation of propranolol under visible light

Non-radical activation of persulfate (PS) by photocatalysts is an effective approach for removing organic pollutants from aqueous environments. In this study, a novel Bi2O3/BiO1.3I0.4 heterojunction was synthesized using a facile solvothermal approach and used for the first time for non-radical activation of PS to degrade propranolol (PRO) in the presence of visible light. The findings found that the degradation rate of PRO in the Bi2O3/BiO1.3I0.4/PS system was significantly increased from 19% to more than 90% within 90 min compared to the Bi2O3/BiO1.3I0.4 system. This indicated that the composite system exerted an excellent synergistic effect between the photocatalyst and the persulfate-based oxygenation. Quenching tests and electron paramagnetic resonance demonstrated that the non-radical pathway with singlet oxygen as the active species played a major role in the photocatalytic process. The existence of photo-generated holes during the reaction could also be directly involved in the oxidation of pollutants. Meanwhile, a possible PRO degradation pathway was also proposed. Furthermore, the impacts of pH, humic acid and common anions on the PRO degradation by the Bi2O3/BiO1.3I0.4/PS were explored, and the system's stability and reusability were also studied. This study exhibits a highly productive catalyst for PS activation via a non-radical pathway and provides a new idea for the degradation of PRO.

Preparation of O-g-C3N4 nanowires/Bi2O2CO3 porous plate composite photocatalysts for the efficient degradation of tetracycline hydrochloride in wastewater

Both g-C3N4 and Bi2O2CO3 are good photocatalysts for the removal of antibiotic pollutants, but their morphological modulation and catalytic performance need to be further improved. In this study, the calcination-hydrothermal method is used to prepare a O-g-C3N4@Bi2O2CO3 (CN@BCO) composite photocatalyst from dicyandiamide and bismuth nitrate. The prepared catalyst is characterized through various methods, including X-ray diffraction (XRD) and transmission electron microscopy (TEM). Further, the effects of different parameters, such as catalyst concentration and initial pH of the reaction solution, on its photocatalytic activity are investigated. The results show that the CN@BCO sample achieves an optimal degradation rate of 98.1% for tetracycline hydrochloride (TCH) with a concentration of 20 mg/L and a removal rate of 69.4% for total organic carbon (TOC) at 40 min. The quenching experiments show that ·O2-, h+, and ·OH participate in the photocatalytic process, with ·O2- being the most dominant active species. The toxicity of the predicted TCH degradation intermediates is analyzed using Toxicity Estimation Software Tool (TEST). Overall, the CN@BCO composite exhibits excellent photocatalytic performance, making it a promising candidate for environmental purification and wastewater treatment.

Multifunctional photocatalyst of graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals derived from lichen for efficient photodegradation of tetracycline and methyl blue

We propose a feasible and economical method of constructing biomass-based multifunctional photocatalysts with excellent adsorption performance and high photodegradation abilities toward tetracycline (TC) and methyl blue (MB) under visible light. A series of novel hybrids of porous graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals (denoted as Fe2O3/Fe3O4@C) were derived from lichen doped with different dosages of Fe3+ by calcination at 700°C under a N2 atmosphere. The Fe2O3/Fe3O4@C hybrids exhibited nanoflake-like shapes, mesoporous structures, and efficient visible light harvesting, thus indicating enhanced adsorption ability and photoactivity toward pollutants. The formed Fe2O3/Fe3O4 heterojunction improved the separation efficiency and inhibited the recombination of photogenerated carriers, whereas the carbon network improved the transfer of photogenerated electrons. Under optimised conditions, the Fe2O3/Fe3O4@C-1 hybrid demonstrated enhanced photodegradation efficiencies of 96.4% for TC and 100% for MB under visible light. In addition, electron spin resonance and trapping measurements were performed to identify active species and determine the photocatalytic mechanism toward pollutants. •O2- and •OH were the active species involved, playing critical roles in the TC and MB photodegradation processes. In addition, a bacterium test revealed that the products of TC degradation by Fe2O3/Fe3O4@C-1 showed low biological toxicity. This work provides a promising preparation strategy or biomass-based photocatalysts for application in environmental pollutant treatment.

Growth of Ag/g-C3N4 nanocomposites on nickel foam to enhance photocatalytic degradation of formaldehyde under visible light

Formaldehyde is a pollutant that significantly affects the indoor air quality. However, conventional remediation approaches can be challenging to deal with low-concentration formaldehyde in an indoor environment. In this study, Photocatalysts of Ag/graphitic carbon nitride (g-C3N4)/Ni with 3D reticulated coral structure were prepared by thermal polymerization and liquid phase photo-deposition, using nickel foam (NF) as the carrier. Experiments demonstrated that when the Ag concentration was 3%, and the relative humidity was 60%, the Ni/Ag/g-C3N4 showed the maximum degradation rate of formaldehyde at 90.19% under visible light irradiation, and the formaldehyde concentration after degradation was lower than the Hygienic standard stated by the Chinese Government. The porous structure of Ni/Ag/g-C3N4 and the formation of Schottky junctions promoted the Adsorption efficiency and degradation of formaldehyde, while the nickel foam carrier effectively promoted the desorption of degradation products. Meanwhile, the degradation rate was only reduced by 3.4% after 16 recycles, the three-dimensional porous structure extended the lifetime of the photocatalyst. This study provides a new strategy for the degradation of indoor formaldehyde at low concentrations.

Fabricating a 3D floating porous PDMS - Ag/AgBr decorated g-C3N4 nanocomposite sponge as a re-usable visible light photocatalyst

In this study, polymeric graphitic carbon nitride (g-C3N4) semiconductors was synthesized via a thermal condensation method. Subsequently, Ag/AgBr nanoparticles with varying ratios were decorated onto the g-C3N4 surface using the water/oil emulsion method. The resulting nanocomposites were characterized using XRD for phase identification and structural analysis, HR-TEM and SEM&EDAX for morphological structure, particle size, and elemental composition analysis, and XPS for investigating the chemical state and electronic structure. The impact of Ag/AgBr content on the optical properties of g-C3N4 were also studied such as (optical bandgap (Eg), refractive index (n), extinction coefficient (k), optical conductivity (σopt) and dielectric function (ε*)), Electrochemical impedance spectroscopy (EIS), PL spectroscopy and Chrono-amperometric investigations were conducted to assess the charge transfer capabilities and long-term durability of the prepared nanocomposites. The results revealed a reduction in Ag/AgBr particle size with an increase in g-C3N4 content, accompanied by a decrease in the optical bandgap from 2.444 eV to 2.393 eV. Furthermore, the nanocomposites exhibited enhanced degradation efficiencies of RhB dye, with the highest tested content of Ag/AgBr achieving 100% degradation after 120 min of irradiation. However, the challenge of catalyst separation after the degradation process remained. To address this issue, we developed a novel approach by impregnating Ag/AgBr@g-C3N4 photocatalyst onto a floating porous sponge using a simple sugar-template technique, offering potential as a reusable photocatalyst material. Furthermore, the 3D PDMS - Ag/AgBr@g-C3N4 photocatalyst was evaluated and found to maintain nearly the same photocatalytic efficiency for up to 5 consecutive cycles.

Synthesis and characterization of Black Au nanoparticles deposited over g-C3N4 nanosheets: enhanced photocatalytic degradation of methylene blue

Black AuNPs, prepared by a facile seeding growth method under ambient conditions, displayed efficient broadband absorption of the incident light over the entire visible and near-infrared regions of the solar spectrum. The spherical black AuNPs with the size of 2-4 nm were deposited over mesoporous g-C3N4 nanosheets. Novel black AuNPs/g-C3N4 plasmonic photocatalysts were used to remove methylene blue (MB) dye from an aqueous solution. The degradation efficiency for the optimal coupling of 1.3 wt.% black AuNPs with g-C3N4 (1.2 g) was found to be 85% within 60 min under visible light irradiation. The calculated kinetic constant was 0.0186 min-1 which was 6.4 and 2.9 times greater than those for g-C3N4 and AuNPs/g-C3N4 nanocomposite, respectively. The excellent potential in photocatalysis was attributed to the synergistic interactions of the g-C3N4 conduction band and the localized surface plasmon resonance effect of black AuNPs. These properties were responsible for the generation of high-energy electrons, a negative shift in the Fermi level of black AuNPs, and the migration of charge carriers. This work studied a new insight into black gold nanoparticles via the design of a visible-light-driven photocatalyst and provided a perspective on valuable photo-related applications such as water treatment.

A novel Z-type heterojunction Bi3O4Cl/Bi4O5I2 photocatalytic composite with broad-spectrum antibacterial activity and degradation properties

At present, the sustainable development of humans is facing health problems and ecological imbalance caused by environmental pollution. To solve the bacteria, antibiotics and other pollutants in wastewater, Bi3O4Cl and Bi4O5I2 with appropriate bandgap width were selected to prepare Z-type heterojunction Bi3O4Cl/Bi4O5I2 photocatalytic materials by calcination method. Under LED light, the best sample Bi3O4Cl/Bi4O5I2-4 could completely inactivate Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in 30 min, Bacillus subtilis (B. subtilis) and Pseudomonas aeruginosa (P. aeruginosa) in 20 min, and degrade 70.6% of tetracycline (TC) and 97.4% of Rhodamine B (RhB). Photocurrent and electrochemical impedance tests (EIS) confirmed the high photocurrent response and low charge transfer resistance in the Bi3O4Cl/Bi4O5I2. The photocatalytic antibacterial and degradation mechanism of Z-type Bi3O4Cl/Bi4O5I2 heterojunction was verified by capture experiments. Thus, this study provides a compact and efficient photocatalyst with broad-spectrum antibacterial activity and degradation properties.

Boron-doped graphene quantum dot/bismuth molybdate composite photocatalysts for efficient photocatalytic nitrogen fixation reactions

Bismuth molybdate (BMO) is a promising visible-driven photocatalyst and constructing heterojunctions in BMO-based materials is an effective way to enhance photocatalytic performance. In this study, boron-doped graphene quantum dots (BGQDs) were synthesized by one-step pyrolysis and carbonization, followed by the preparation of bismuth molybdate/boron-doped graphene quantum dots (BGQDs/BMO) heterojunction photocatalysts using in-situ growth method. The introduction of BGQDs significantly improved the photocatalytic nitrogen fixation activity under the irradiation of visible light and without scavengers. The highest NH3 yield was achieved with BGQDs/BMO-10, which was 3.48 times higher than pure phase BMO. This improvement was due to the formation of Z-scheme heterojunctions between BGQDs and BMO with the synergistic mechanism of interfacial charge transport and the generation of more protons. This study provides useful guidance for enhancing the visible-light nitrogen fixation performance of BMO materials.

Efficient removal of 3,6-dichlorocarbazole with Fe0-activated peroxymonosulfate: performance, intermediates and mechanism

Nowadays, polyhalogenated carbazoles (PHCZs) are a major pollutant that has recently sparked widespread concern. In this work, peroxymonosulfate (PMS) was activated by zero valent iron (Fe⁰) to remove 3,6-dichlorocarbazole (3,6-CCZ). First, the key parameters influencing 3,6-CCZ degradation (PMS dosage, Fe⁰ dosage, initial pH, temperature and co-existing ions) were determined. Under the determined optimum conditions, the removal rate of 3,6-CCZ reached 100% within 1.5 h. Sulfate radicals (SO₄·^-), hydroxyl radicals (OH·), and singlet oxygen (¹O₂) generated in the reaction were directly identified with 0.1 M 5,5-dimethyl-1-pyrrolidine N-oxide (DMPO) by in-situ electron paramagnetic resonance (EPR) and indirectly identified by radical quenching experiments. The main reactive oxygen species (ROS) were different from most reported hydroxyl radicals (OH·) and sulfate radicals (SO₄·^-). In this study, it was found that OH· and ¹O₂ play a major role. Then, fresh and reacted Fe⁰ were characterized by XRD, SEM, and XPS. Iron corrosion products such as Fe₂O₃, Fe₃O₄, and FeOOH were generated. Finally, 3,6-CCZ degradation intermediates were identified by GC-MS and its degradation pathway was speculated. The intermediate pathway confirmed the combined action of (OH·) and (¹O₂) in 3,6-CCZ removal. This study provides new insight into the activation mechanism of Fe⁰-activated PMS and the removal mechanism of 3,6-CCZ.Highlights Fe⁰ is a long-lasting and efficient catalyst of PMS for the degradation of 3,6-CCZ.The key parameters influencing 3,6-CCZ degradation were determined.The degradation pathways of 3,6-CCZ were inferred.OH· and ¹O₂ were the main ROS in Fe⁰-activated PMS system.

Facile synthesis of NiAl2O4/g-C3N4 composite for efficient photocatalytic degradation of tetracycline

Designing high-efficiency photocatalysts responsive to visible light is important for the degradation of antibiotics in water. Heterojunction engineering is undoubtedly an effective strategy to improve the photocatalytic performance. In this work, spinel-type metal oxides (NiAl₂O₄, NAO) are synthesized by a simple sol-gel and calcination process. After compounding graphitic carbon nitride (g-C₃N₄), NAO/g-C₃N₄ heterojunction is obtained, which then is used as the photocatalyst for tetracycline hydrochloride (TC). The effects of photocatalyst dosage, the initial concentration of TC, and solution pH on photodegradation performance are systematically studied. The removal rate of TC on NAO/g-C₃N₄ reach up to ∼90% after visible light irradiation for 2 hr and the degradation rate constant is ∼7 times, and ∼32 times higher than that of pure NAO and g-C₃N₄. The significantly improved photocatalytic activity can be attributed to the synergistic effect between well matched energy levels in NAO/g-C₃N₄ heterojunctions, improvement of interfacial charge transfer, and enhancement of visible light absorption. This study provides a way for the synthesis of efficient photocatalysts and an economic strategy for removing antibiotics contamination in water.

Construction of Waste Chalk Powder into mpg-C3N4-CaSO4 as an Efficient Photocatalyst for Dye Degradation under UV-Vis Light and Sunlight

In this article, we present the synthesis of calcium sulfate nanoparticles (CaSO₄ NPs) from waste chalk powder by the calcination method. These CaSO₄ NPs were utilized for the construction of a mesoporous graphitic carbon nitride-calcium sulfate (mpg-C₃N₄-CaSO₄) photocatalyst. Synthesized materials were confirmed by several characterization techniques. The photocatalytic performance of the synthesized samples was tested by the degradation of methylene blue (MB) in the presence of both UV-vis light and sunlight. The efficiency of photocatalytic degradation of MB dye using the optimized mpg-C₃N₄-CaSO₄-2 composite reached 91% within 90 min in the presence of UV-vis light with superb photostability and recyclability after five runs compared to individual mpg-C₃N₄ and CaSO₄ NPs and reached 95% within 120 min under sunlight. Histotoxicological studies on fish liver and ovary indicated that the dye containing the solution damaged the structure of the liver and ovary tissues, whereas the photodegraded solution of MB was found to be less toxic and caused negligible alterations in their typical structure similar to the control group.

Bismuth-Rich Co/Ni Bimetallic Metal-Organic Frameworks as Photocatalysts toward Efficient Removal of Organic Contaminants under Environmental Conditions

Active photocatalysts with an efficiency of 99% were prepared for the degradation of the industrial dye, methylene blue (MB), under visible light irradiation. These photocatalysts comprised Co/Ni-metal-organic frameworks (MOFs), to which bismuth oxyiodide (BiOI) was added as a filler to prepare Co/Ni-MOF@BiOI composites. The composites exhibited remarkable photocatalytic degradation of MB in aqueous solutions. The effects of various parameters, including the pH, reaction time, catalyst dose, and MB concentration, on the photocatalytic activity of the prepared catalysts were also evaluated. We believe that these composites are promising photocatalysts for the removal of MB from aqueous solutions under visible light.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

In-situ-reduced synthesis of cyano group modified g-C3N4/CaCO3 composite with highly enhanced photocatalytic activity for nicotine elimination

Graphite carbon nitride has many excellent properties as a two-dimensional semiconductor material so that it has a wide application prospect in the field of photocatalysis. However, the traditional problems such as high recombination rate of photogenerated carriers limit its application. In this work, we introduce nitrogen deficiency into g-C₃N₄ to solve this problem a simple and safe in-situ reduction method. g-C₃N₄/CaCO₃ was obtained by a simple and safe one-step calcination method with industrial-grade micron particles CaCO₃. Cyano group modification was in-situ reduced during the thermal polymerization process, which would change the internal electronic structure of g-C₃N₄. The successful combination of g-C₃N₄ and CaCO₃ and the introduction of cyanide have been proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometer. The formation of the cyano group, an electron-absorbing group, promotes the effective separation of photogenic electron hole pairs and inhibits the recombination of photogenic carriers. These advantages result in the generation of more •O₂^- and ¹O₂ in the catalytic system, which increases the photocatalytic efficiency of nicotine degradation by ten times. Furthermore, the degradation process of nicotine has been studied in this work to provide a basis for the degradation of nicotine organic pollutants in the air.

One-step preparation of MoOx/ZnS/ZnO composite and its excellent performance in piezocatalytic degradation of Rhodamine B under ultrasonic vibration

This paper synthesized a new type of ternary piezoelectric catalyst MoO_x/ZnS/ZnO (MZZ) by a one-step method. The catalytic degradation of Rhodamine B (RhB) solution (10 µg/g, pH = 7.0) shows that the composite catalyst has excellent piezoelectric catalytic activity under ultrasonic vibration (40 kHz). The piezoelectric degradation rate of the optimal sample reached 0.054 min^-1, which was about 2.5 times that of pure ZnO. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electrochemical impedance spectroscopy (EIS) technologies were used to analyze the structure, morphology, and interface charge transfer properties of the MZZ piezocatalysts. The results showed that the composite catalyst may have a core-shell structure. ZnS is coated on the surface of ZnO, while MoO_x adheres to the surface of ZnS. This structure endowed MZZ larger specific surface area than ZnO, which benefits the RhB adsorption. More importantly, the formed heterojunction structure between ZnS and ZnO promotes the separation of positive and negative charges induced by the piezoelectric effect. MoO_x species may act as a charge trap to further promote more carriers to participate in the reaction. In addition, MoO_x may also be beneficial in adsorbing dyes. Active species capture experiments show that superoxide radicals and holes are the main active species in piezoelectric catalytic reactions on MZZ catalysts.

Enhanced photocatalytic degradation of tetracycline by a H2O2-assisted Bi3NbO7/Bi2Sn2O7 composite under visible light

A Z-scheme BNO/BSO composite photocatalyst has been successfully prepared using an in situ solvothermal method. The phase component, microstructure and optical properties of the as-prepared samples were characterized using X-ray diffractometry, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence spectroscopy and other means. The photocatalytic performance of the BNO/BSO composite was evaluated via the degradation of the typical antibiotic tetracycline (TC) under hydrogen peroxide assistance and visible light irradiation. The "cata + H₂O₂ + vis" system shows the best photocatalytic activity, and its apparent rate constant reaches 0.03164 min^-1, which is 4.9 times and 5.7 times that of the "cata + vis" system and the "cata + H₂O₂" system, respectively. Compared with pristine that of BSO alone, the reaction rate constant of the 15% BNO/BSO composite increases 1.8 times. The enhanced photocatalytic activity is attributed to the construction of a unique Z-scheme-type heterojunction, which effectively suppresses the recombination of electron-hole pairs. In addition, the addition of H₂O₂ promotes the generation of more active species. Moreover, a possible photocatalytic degradation mechanism is also further proposed.

Regulation and photocatalytic degradation mechanism of a hydroxyl modified UiO-66 type metal organic framework

Photocatalytic performance can be effectively improved by modifying the functional groups on the organic ligands of metal organic frameworks (MOFs). Herein, the hydroxyl-modified UiO-66 type MOF: UIO-66-2OH(2,3), was successfully synthesized by the method of ligand exchange by the 2,3-dihydroxyterephthalic acid and UIO-66 as raw materials. The mechanism of photocatalytic degradation of methylene blue (MB) by UIO-66-2OH(2,3) shows that the hydroxyl functional group on the organic ligand regulates its electronegativity and expands its light absorption range. The decomposition of MB is carried out in multiple steps under the oxidation of the hydroxyl radical (˙OH). This research result shows the direction for guiding the synthesis of efficient photocatalysts and clarifying the light absorption of MOFs regulated by hydroxyl functional groups.

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Graphitic carbon nitride (g-C₃N₄), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C₃N₄ is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C₃N₄ are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO₂ reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C₃N₄-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C₃N₄, including the fabrication, modification, and application in energy and environmental sustainability.

Selected dechlorination of triclosan by high-performance g-C3N4/Bi2MoO6 composites: Mechanisms and pathways

Environmental-friendly and efficient strategies for triclosan (TCS) removal have received more attention. Influenced by COVID-19, a large amount of TCS contaminants were accumulated in medical and domestic wastewater discharges. In this study, a unique g-C₃N₄/Bi₂MoO₆ heterostructure was fabricated and optimized by a novel and simple method for superb photocatalytic dechlorination of TCS into 2-phenoxyphenol (2-PP) under visible light irradiation. The as-prepared samples were characterized and analyzed by XRD, BET, SEM, XPS, etc. The rationally designed g-C₃N₄/Bi₂MoO₆ (4:6) catalyst exhibited notably photocatalytic activity in that more than 95.5% of TCS was transformed at 180 min, which was 3.6 times higher than that of pure g-C₃N₄ powder. This catalyst promotes efficient photocatalytic electron-hole separation for efficient dechlorination by photocatalytic reduction. The samples exhibited high recyclable ability and the dechlorination pathway was clear. The results of Density Functional Theory calculations displayed the TCS dechlorination selectivity has different mechanisms and hydrogen substitution may be more favorable than hydrogen abstraction in the TCS dechlorination hydrogen transfer process. This work will provide an experimental and theoretical basis for designing high-performance photocatalysts to construct the systems of efficient and safe visible photocatalytic reduction of aromatic chlorinated pollutants, such as TCS in dechlorinated waters.

A novel NiO/BaTiO3 heterojunction for piezocatalytic water purification under ultrasonic vibration

This work designed and prepared a novel heterojunction composite NiO/BaTiO₃ through a method of photodeposition and used it in piezocatalytic dye removal for the first time. Results of the piezocatalytic test indicated that the NiO/BaTiO₃ composite presented superior efficiency and stability in the RhB degradation under the vibration of ultrasonic waves. The best NiO/BaTiO₃ sample synthesized under light irradiation for 2 h displayed an RhB degradation rate of 2.41 h^-1, which was 6.3 times faster than that of pure BaTiO₃. By optimizing the piezocatalytic reaction conditions, the degradation rate constant of NiO/BaTiO₃ can further reach 4.14 h^-1 A variety of systematic characterizations were executed to determine the reason for the excellent piezocatalytic performance of NiO/BaTiO₃. The band potentials of NiO and BaTiO₃ are found to coincide, and at their contact interface, they may create a type-II p-n heterojunction structure. Driven by the potential difference and the built-in electric field, piezoelectrically enriched charge carriers can migrate between NiO and BaTiO₃, resulting in improved efficiency in charge separation and an increase in the piezoelectric catalytic performance. This study may provide a potential composite catalyst and a promising idea for the design of highly efficient catalysts in the field of piezoelectric catalysis.

Facile preparation of visible light-sensitive layered g-C3N4 for photocatalytic removal of organic pollutants

The graphite-phase carbon nitride (g-C₃N₄) photocatalytic materials were prepared by one-step calcination method to degrade methylene blue (MB) and potassium butyl xanthate (PBX) under visible light irradiation. The prepared g-C₃N₄ photocatalytic materials were investigated in detail by various characterizations, and the experiments showed that the graphitic phase carbon nitride photocatalytic materials were successfully prepared by the one-step calcination method. The material possesses excellent optical properties and strong visible light absorption, thus achieving photocatalytic degradation of MB and PBX. The catalyst dosage, pH, the initial concentration of pollutants have important effects on photocatalytic activity of MB and PBX. The photocatalytic degradation efficiency was 98.99% for MB and 96.83% for PBX under the optimal conditions (catalyst dosage, initial pollutant concentration and pH value were 500 mg L^-1, 20 mg L^-1 and 7, respevtively). The photocatalytic mechanisms on MB and PBX were elucidated. ·OH was the key specie for MB, while ·O₂^- was the key specie for PBX. This study advances the development of photocatalytic technology for mineral wastewater.

Enhanced photocatalytic performance over PANI/NH2-MIL-101(Fe) with tight interfacial contact

Constructing a suitable heterojunction structure while maintaining a tight interface to promote the separation of photogenerated electrons is of great significance for improving the photocatalytic activity. In this paper, a new PANI/NH₂-MIL-101(Fe) II-scheme heterojunction was prepared by a hydrothermal method. PANI with a porous structure was firstly obtained by the template method, and then PANI fragments were loaded on the surface of NH₂-MIL-101(Fe) crystals under hydrothermal conditions to obtain a PANI/NH₂-MIL-101(Fe) photocatalyst. The photocatalytic degradation of TC under simulated sunlight can reach 90% within an hour, and the maximum hydrogen evolution rate is 7040 μmol g^-1 h^-1 under visible light. The enhanced catalytic performance of PANI/NH₂-MIL-101(Fe) was attributed to the appropriate matching of the VB and CB of PANI and NH₂-MIL-101(Fe), and secondly, the coordination bonds formed between PANI and NH₂-MIL-101(Fe) provided a channel for charge separation and transfer. Finally, a possible mechanism of the photocatalytic system was proposed through a free radical capture experiment and characterization analysis. More importantly, the experiment proved that the heterojunction formed by PANI and NH₂-MIL-101(Fe) can achieve the effect of complementing each other, which provides a feasible idea and method for the design of efficient heterojunction photocatalysts.

Few-layered Bi4O5I2 nanosheets enclosed by {1 0-1} facets with oxygen vacancies for highly-efficient removal of water contaminants

Few-layered Bi₄O₅I₂ nanosheets (FL-Bi₄O₅I₂) were synthesized by intergrowth with Bi₂O₂CO₃ under room temperature. The photoactivity of FL-Bi₄O₅I₂ was 2.5 and 9.5 times higher than that of Bi₄O₅I₂ nanoflakes (NF-Bi₄O₅I₂, about 30 nm thickness) and standard visible-light-driven N-TiO₂, respectively. Moreover, FL-Bi₄O₅I₂ exhibited a wide pH application range (3.0 - 10.0) and excellent photostability. The characterization results showed FL-Bi₄O₅I₂ was consisted of 5 - 8 layers with thickness of 4 - 7 nm and enclosed by {1 0 - 1} facets. The ultrathin characteristics could accelerate the charge transfer to the surface due to the shortened transport distance. Compared to NF-Bi₄O₅I₂, surface oxygen vacancies and the more negative CB potential were formed on FL-Bi₄O₅I₂. The photogenerated electrons were confirmed to be captured by surface oxygen vacancies to effectively reduce surface adsorbed O₂ into HO₂^•/O₂^•-, leaving more h⁺ to oxidize organic pollutants. This process was further facilitated by the more negative CB potential of FL-Bi₄O₅I₂, resulting in the highly efficient removal of pollutants.

Facile assembly and excellent elimination behavior of porous BiOBr-g-C3N4 heterojunctions for organic pollutants

Photocatalysis can be an effective technique for eliminating organic contaminants from water. In this study, BiOBr flower-spheres coupled with porous graphite carbon nitride (g-C₃N₄) were synthesized by controlling the dosage of cetyltrimethylammonium bromide (CTAB). Various characterization techniques were then applied to elucidate the structure-performance relationships of the resulting heterojunction photocatalysts in degrading organic dyes. Experimental results established an optimal molar ratio for KBr to CTAB of 5:1. Benefiting from a remarkable porous structure and tight coupling between porous g-C₃N₄ and BiOBr, the optimal BiOBr-g-C₃N₄(2%) exhibited enhanced visible light absorption capability and promoted the separation of photoinduced carriers. Total removal efficiency for rhodamine B (RhB, 25.0 mL, 20.0 mg L^-1) reached 87% within 30 min in the presence of BiOBr-g-C₃N₄(2%) (20.0 mg) (i.e., 1.51 μmol (g_{photocatalyst} min)^-1), which is superior to the performance of BiOBr (72%) (i.e., 1.25 μmol (g_{photocatalyst} min)^-1), g-C₃N₄ (21%) (i.e., 0.37 μmol (g_{photocatalyst} min)^-1). Furthermore, the photocatalytic reaction rate constant over the optimal heterojunction was 0.034 min^-1, which is significantly larger than those of porous g-C3N4 (0.003 min^-1) and BiOBr (0.015 min^-1). Moreover, this type II heterojunction showed good universality for other organic dyes (such as methyl violet, methylene blue, and crystal violet), highlighting a promising potential role in the elimination of environmental pollutants.

Designing Z-scheme AgIO4 nanorod embedded with Bi2S3 nanoflakes for expeditious visible light photodegradation of congo red and rhodamine B

The present study describes the enhanced photodegradation of organic pollutant dyes, congo red (CR) and rhodamine B (RhB) dyes under visible light irradiation. AgIO₄ nanorods decorated on Bi₂S₃ nanoflakes in various proportions were synthesized via sono-chemical route wherein the deposition of varying amounts of AgIO₄ on Bi₂S₃ plays a pivotal role in improving the photodegradation ability. The characterization of the as-synthesized nanohybrids was assessed by XRD, UV-vis DRS, PL, EIS, ESR, FT-IR, XPS, HR-TEM, FE-SEM, N₂ adsorption and desorption techniques. The effect of initial CR and RhB dye concentration, reaction pH and usage of nanohybrid concentration were investigated where 30%-AgIO₄/Bi₂S₃ exhibited excellent visible light photodegradation of 95.58% for CR and 96.11% for RhB dyes at 140 min and 100 min respectively. The superoxide (•O^2-) and hydroxyl radicals (•OH) played predominant role in the photodegradation of CR and RhB which is experimentally confirmed by radical trapping experiments. Also, the photocatalysts exhibited good photo stability and excellent reusability. The TOC analysis confirmed the complete mineralization of CR and RhB dyes by the nanohybrid and the formation of possible intermediate and degradation pathway was delineated based on GC/MS analysis. The outstanding photodegradation performance were ascribed to the Z-scheme charge transfer path, which effectively promotes the separation and transfer of e^-/h⁺ pairs, resulting in a strong redox activity of the accumulated charge to decompose organic dyes during the degradation reaction. The study suggested that the nanohybrid can be utilized for the removal of organic pollutants from the contaminated water bodies.

Broad Spectral Response Z-Scheme Three-Dimensional Ordered Macroporous Carbon Quantum Dots/TiO2/g-C3N4 Composite for Boosting Photocatalysis

Photocatalytic degradation technology is one of the effective protocols to solve environmental problems. TiO₂ has always been favored for its photostability and low cost. However, the insufficient photocatalytic activity of TiO₂ limits its application due to the severe recombination of photogenerated electrons and holes and a narrow light response range. Therefore, 3DTCN, a TiO₂/g-C₃N₄ composite with a three-dimensional ordered macroporous structure was prepared by a colloidal crystal template technique to form a heterojunction for inhibiting the photogenerated electron-hole recombination. On 3DTCN, carbon quantum dots (CQDs) were loaded by impregnation to obtain x % CQDs/3DTCN with a broad spectral response to light. The physical and chemical properties of samples were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), high-resolution-TEM, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis, photoluminescence spectroscopy, and ultraviolet-visible diffuse reflectance spectroscopy. The photocatalytic activity was evaluated via degrading the rhodamine B (RhB) dye, and the degradation efficiency of 1% CQDs/3DTCN (98%) was found to be much higher than that of 3DTCN (42%) in 80 min under simulated sunlight irradiation. Furthermore, it also possessed excellent durability. Meanwhile, the sample also showed an outstanding photoelectric property. Finally, the proposed mechanism of the composites had been mainly analyzed by density functional theory calculations. This work thus provides an idea to form a 3D structure heterojunction and further improve the photocatalytic activity.

Peroxymonosulfate activated by photocatalytic fuel cell with g-C3N4/BiOI/Ti photoanode to enhance rhodamine B degradation and electricity generation

The development of traditional photocatalytic fuel cell (PFC) is severely hindered by poor visible-light response and limited reaction space. In this study, a visible-light responsive PFC with g-C₃N₄/BiOI/Ti photoanode was proposed and applied to activate peroxymonosulfate (PMS) to degrade rhodamine B. The degradation rate, maximum power density and maximum photocurrent density of the PMS/PFC system were respectively 95.39%, 103.87 μW cm^-2 and 0.62 mA cm^-2, which was respectively 1.28, 2.18, and 1.98 times that of PFC. The excellent performance is attributed to the production of more reactive oxygen species and the extension of the reaction space range after the activation of PMS. The activation pathway of PMS and charge transfer pathway of the photoanode were discussed in detail, and it was proposed that PMS was activated by Z-scheme heterojunction g-C₃N₄/BiOI/Ti photoanode.

New and highly efficient Ultra-thin g-C3N4/FeOCl nanocomposites as photo-Fenton catalysts for pollutants degradation and antibacterial effect under visible light

The photo-Fenton reaction was widely used in the removal of pollutants in waste water, which makes it exhibit great potential in the field of environmental remediation. Hence, it is crucial to explore a new efficient and stable photo-Fenton catalyst driven by visible light. In this work, a simple two-step calcination method was used to synthesize sheet-like stacked Ultra-thin g-C₃N₄/FeOCl (CNF) materials. The morphology, composition, photo-Fenton performance, and antibacterial properties were systematically analyzed. Research results exhibited that the synthesized CNF catalysts showed enhanced visible light absorption capacity and excellent photo-Fenton performance. Compared with FeOCl alone, CNF displayed stronger degradation ability for rhodamine B (RhB) and could achieve 97% degradation within 9 min, which was about 10 times that of pure FeOCl. At the same time, the composite catalysts exhibited excellent antibacterial effects under photo-Fenton conditions. The antibacterial rate of CNF composite catalyst under photo-Fenton conditions can reach almost 99%, which was 3 times that of photocatalysis alone and 2 times that of Fenton alone. The heterojunction formed between Ultra-thin g-C₃N₄ and FeOCl promoted the separation of e^- and h⁺. Simultaneously, the presence of e^- promoted the cycle of Fe³⁺ and Fe²⁺ in FeOCl, thereby promoting the generation of hydroxyl radicals (OH) from H₂O₂ and improving the photo-Fenton activity to achieve the effect of degrading pollutants and antibacterial. The photo-Fenton catalysis and degradation mechanism were analyzed in detail. This work provided a theoretical basis for the application of CNF material in the removal of wastewater.

Fabrication and characterization of a TiBs@MCN cable-like photocatalyst with high photocatalytic performance under visible light irradiation

A cable-like photocatalyst, TiBs@MCN, with a larger specific surface area and higher visible-light photocatalytic activity, is successfully fabricated by an in situ hydrothermal self-assembly approach.