Degradation of dissolved organic matter in effluent of municipal wastewater plant by a combined tidal and subsurface flow constructed wetland

The evolution of a typical plateau lake from macrophyte to algae leads to the imbalance of nutrient retention

Long-term anthropogenic nitrogen (N) and phosphorus (P) inputs have led to lake eutrophication and decreased environmental quality. However, the imbalance in nutrient cycling caused by ecosystem transformation during lake eutrophication is still unclear. The N, P, organic matter (OM) and their extractable forms in the sediment core of Dianchi Lake were investigated. Combining ecological data and geochronological techniques, a coupling relationship between the evolution of lake ecosystems and nutrient retention was established. The results show that the evolution of lake ecosystems promotes the accumulation and mobilization of N and P in sediments, leading to an imbalance in nutrient cycling in the lake system. From the "macrophyte-dominated" period to the "algae-dominated" period, the accumulation rates of potential mobile N and P (PMN, PMP) in sediments have significantly increased, and the retention efficiency of total N and P (TN, TP) has decreased. The increased TN/TP ratio (5.38 ± 1.52 ‒ 10.19 ± 2.94) and PMN/PMP ratio (4.34 ± 0.41 ‒ 8.85 ± 4.16), as well as the reduced humic-like/protein-like ratio (H/P, 11.18 ± 4.43 ‒ 5.97 ± 3.67), indicated an imbalance in nutrient retention during sedimentary diagenesis. Our results show that eutrophication has resulted in the potential mobilization of N in sediments exceeding P, providing new insights for further understanding the nutrient cycle in the lake system and strengthening lake management.

Sediment organic matter properties facilitate understanding nitrogen transformation potentials in East African lakes

East African lakes include the most productive and alkaline lake group in the world. Yet, they generally receive fewer nutrient inputs than the densely populated subtropical and temperate lakes in the northern hemisphere. In these lakes with insufficient supplies of inorganic nitrogen, the mineralization of benthic organic matter can play an important role in driving the nutrient cycle and nitrogen loss. Using a suite of stable ¹⁵N isotope dilution and tracer techniques, we examined five main processes of the sediment nitrogen cycle in 16 lakes and reservoirs of Tanzania and Kenya, East Africa: gross nitrogen mineralization, ammonium immobilization, dissimilatory nitrate reduction to ammonium (DNRA), and the dinitrogen (N₂) production via denitrification and anaerobic ammonium oxidation (anammox). Gross nitrogen mineralization and ammonium immobilization showed the maximum values of 9.84 and 12.39 μmol N kg^-1 h^-1, respectively. Potential DNRA rates ranged from 0.22 to 8.15 μmol N kg^-1 h^-1 and accounted for 10 %-74 % (average 25 %) of the total dissimilatory nitrate reduction. Potential nitrate reduction rates in most lakes were dominated by denitrification with a contribution of 26 %-85 % and a mean of 65 %. We further found that the sediment nitrogen transformations were driven mainly by benthic organic matter properties and water column phosphate concentrations, reflecting microbial metabolic responses to the changing carbon and nutrients availability. For instance, autochthonous production of protein-like organic matter attributed to active sediment nitrogen mineralization, DNRA, and denitrification. In contrast, the high degree of humification caused by the inputs of terrestrial humic-like substances slowed down the sediment nitrogen transformations. The contribution of DNRA to total dissimilatory nitrate reduction was significantly positively correlated to sediment C: N ratios. These results indicate that predictions of sediment N supply and loss in East African lakes can be improved by incorporating sediment organic matter properties.

Study of the effect of pyrite and alkali-modified rice husk substrates on enhancing nitrogen and phosphorus removals in constructed wetlands

The combined effects and respective advantages of using pyrite and alkali-modified rice husk (RH) were studied as substrates for nitrogen and phosphorus removal from constructed wetlands, and the effects of the carbon to nitrogen (C/N) ratio and the tidal flow mode on system performance were explored. The results showed that alkali-modified RH, which enhances heterotrophic denitrification, had far more advantages than pyrite, which enhances autotrophic denitrification, and alkali-modified RH can be used for the treatment of sewage containing low C/N ratios. At a C/N ratio of 1.5, the total nitrogen (TN) removal rates exceeded 95%. However, the removal efficiency of the system with only pyrite only reached 76.90% when the influent C/N ratio was 6. Pyrite achieved a total phosphorus (TP) removal 10-20% higher than that of the control group. The tidal flow CWs showed enhanced nitrification, and the NH₄⁺-N removal rates increased by approximately 10%, but the increase in dissolved oxygen (DO) was still insufficient to meet the needs of the systems, leading to limited TP removal. The combination of pyrite and alkali-modified RH was optimal for improving the ability of constructed wetlands to treat wastewaters, simultaneously removing nitrogen and phosphorus from sewage containing low C/N ratios. Combined with the tidal flow mode strategy, the use of pyrite and alkali-modified RH as substrates showed substantial advantages for improving water quality.

Knowledge Atlas on the Relationship between Water Management and Constructed Wetlands—A Bibliometric Analysis Based on CiteSpace

Water management is a crucial resource conservation challenge that mankind faces, and encouraging the creation of manmade wetlands with the goal of achieving long-term water management is the key to long-term urban development. To summarise and analyse the status of the research on the relationship between water management and constructed wetlands, this paper makes use of the advantages of the bibliometric visualization of CiteSpace to generate country/region maps and author-collaboration maps, and to analyse research hotspots and research dynamics by using keywords and literature co-citations based on 1248 pieces of related literature in the core collection in the Web of Science (WoS) database. The existing research shows that the research content and methods in the field of constructed-wetland and water-management research are constantly being enriched and deepened, including the research methods frequently used in constructed wetlands in water management and in the research content under concern, the functions and roles of constructed wetlands, the relevant measurement indicators of the purification impact of constructed wetlands on water bodies, and the types of water bodies treated by constructed wetlands in water management. We summarise the impact pathways of constructed wetlands on water management, as well as the impact factors of constructed wetlands under water-management objectives, by analysing the future concerns in the research field to provide references for research.

Enhancement of nitrogen removal and energy recovery from low C/N ratio sewage by multi-electrode electrochemical technology and tidal flow via siphon aeration

In view of the difficulty in denitrification of low C/N ratio wastewater, electrochemical technology with multiple electrodes and tidal flow method via siphon aeration were used to enhance the denitrification process. At the same time, because of the low phosphorus removal efficiency in traditional activated sludge process, the constructed wetland and microbial fuel cell (CW-MFC) reactor with dewatered alum sludge (DAS) as substrate were constructed. In addition, the REDOX conditions of the reactor were changed by siphon, which significantly improved the removal efficiency of N and P and the energy recovery capacity of the reactor. In the 172 d, the Tidal Flow Constructed Wetland-Microbial Fuel Cell (TF CW-MFC) had the highest removal efficiency of COD and total nitrogen (TN), which were 97.4% and 83.4%, respectively. Although the removal rate of total phosphorus (TP) by TF CW-MFC was lower than artificial aeration, it can still reached 89.0%. The removal effect of aromatic protein substances in water was also significant. The amount of electrons generated by the artificial aeration anode and the amount of oxygen generated by the cathode were not enough to match. The voltage of TF CW-MFC was significantly higher than artificial aeration, around 350 mV, and the maximum power density was 98.16 mW m^-3. In addition, MFC had an inhibitory effect on CW methane emissions. The analysis of the microbial community structure showed that most of the dominant bacteria of TF CW-MFC belonged to the Proteobacteria, Actinobacteria and Chloroflexi. These results showed that the TF CW-MFC technology as a zero-energy oxygen supply mode had high efficiency in the treatment of low C/N ratio wastewater and also had the environmental effect of reducing methane emissions. This study suggests that this green wastewater treatment technology has potential application value.

Systematically assess the advancing and limiting factors of using the multi-soil-layering system for treating rural sewage in China: From the economic, social, and environmental perspectives

Solving the problem of rural sewage is considered an essential task in China's rural revitalization strategy. Based on the yearbook data of sewage treatment in rural areas between 2014 and 2019, although the rate of sewage treatment in rural areas of China showed an upward trend, it was still below 35%, mainly due to the lack of suitable sewage treatment technologies. Here, we discuss the multi-soil-layering (MSL) system, which is an emerging technology suitable for rural sewage treatment. It was deemed to overcome the shortcomings of current biological and ecological treatment technologies, such as complex operation, large area, and high operating costs. We used system dynamics to evaluate the advancing and limiting factors of MSL application for rural sewage treatment from the social, environmental, and economic dimensions. The results illustrated a complete causal loop diagram in which essential variables and relationships were concentrated in the technology, operation and maintenance, and satisfaction of farmers. The efficiency of MSL is the key variable affecting the final decision of the MSL application. Overall, using MSL to treat rural sewage could be an option to improve the rural environment in China. However, the scientific technological model for MSL should be further explored. This review provides guidance on how to promote MSL systems in rural areas.

Exploring the fate of dissolved organic matter at the molecular level in the reactive electrochemical ceramic membrane system using fluorescence spectroscopy and FT-ICR MS

This research evaluated the performance of reactive electrochemical ceramic membrane (REM) in treating secondary effluent and investigated the fate of dissolved organic matter (DOM) at the molecular level. The role of adsorption, electrosorption, and oxidation in DOM removal was comprehensively elucidated based on fluorescence spectroscopy and high-resolution mass spectrometry (FT-ICR MS). Among the fluorescence components (C1-C3) in secondary effluent, microbial humic-like C2 showed fewer adsorption on the REM surface without applying an electrical potential. The electrosorption helped an enhanced uptake of all DOM components and transformed them onto the electrode surface. The fluorescence components and all three fractions (hydrophilic, transphilic, and hydrophobic) were rapidly degraded, and finished water with stable DOM was obtained. The leading degradation phenomena were the change of the unsaturated compounds to the aliphatic and transformation of large-sized molecules to medium and small-sized ones. Above 70% of the compounds in the secondary effluent acted as precursors, which were mineralized/degraded and transformed products were found on the REM surface and in the finished water. The compounds containing sulfur (CHOS) were easily and preferably degraded/mineralized, followed by the compounds containing nitrogen (CHON) and CHO. The oxidation of DOM led to the extensive formation of organo-chlorinated compounds, which contributed above 80% in products. Overall, the combination of fluorescence spectroscopy and FT-ICR MS provided unique behavior of DOM in the secondary effluent toward electro-oxidation in the REM system. These findings could help explore the potential of REM for different water matrices to project the possible composition of DOM in the finished water.

Dynamic Adsorption Characteristics of Phosphorus Using MBCQ

Biochar is a new type of adsorption material with excellent performance, but it has some problems, such as light texture, poor sedimentation, and difficult recovery, which limits its practical application. In this study, biochar microspheres (MBCQ) were prepared by the sol–gel method using powdery biochar from Hydrocotyle vulgaris as raw material and sodium alginate as a granular carrier. Experiments were performed to investigate the dynamic adsorption characteristics of phosphorus by MBCQ in the adsorption column and the influences of particle size, initial phosphorus concentration, flow rate, and column height on the breakthrough curve. The results showed that the static adsorption properties of different particles varied and that 3-millimeter particles were optimal. The breakthrough time positively correlated with column height and negatively correlated with initial phosphorus concentration, flow rate, and particle size. Flow velocity significantly impacted breakthrough time and length of mass transfer. The bed depth/service time model accurately predicted the relationship between breakthrough times and column heights. When ct/c0 = 0.6, the average relative deviation between predicted and measured values was the lowest. The Thomas model described the MBCQ adsorption process of Ph (R2 > 0.95), which indicated that diffusion in MBCQ adsorption was not a rate-limiting step.

Activation of Peroxymonosulfate Using Secondary Pyrolysis Oil-Based Drilling Cuttings Ash for Pollutant Removal

In this study, the utilization of secondary pyrolysis oil-based drilling cuttings ash (OBDCA-sp) to activate peroxymonosulfate (PMS) for pollutant removal was investigated. The chemical and physical properties of OBDCA-sp were explicitly analyzed via multiple characterization. The activation efficiency of OBDCA-sp for PMS was tested using humic acid (HA) as the target pollutant. 92% of HA and 52% of total organic carbon in solution could be removed using OBDCA-sp-activated PMS under optimal conditions: OBDCA-sp dosage at 4 g/L, PMS concentration at 4 mmol/L, HA concentration at 10 mg/L, and pH value at 7. After four cycles, 84% removal rate of HA could still be achieved using OBDCA-sp to activate PMS. The main catalysis elements for PMS activation in OBDCA were postulated to be Fe(III), Co(III), and Mn(III), based on X-ray photoelectron spectroscopy and X-ray diffraction results. The results of the quenching experiment indicated that SO4 •-, •OH, and 1O2 were the main reactive oxygen species (ROS) and that 1O2 was the dominant ROS in the HA removal process. Radical trapping experiments indicated the presence of SO4 •-, •OH, and 1O2 in the reaction system. This study presented a novel utilization path of OBDCA in the field of environmental remediation.