Study on adsorption of glyphosate (N-phosphonomethyl glycine) pesticide on MgAl-layered double hydroxides in aqueous solution

Facile and innovative application of surfactant-modified-zeolite from Austrian fly ash for glyphosate removal from water solution

This study highlights a pioneering approach in the development of an efficient, affordable, and economically feasible adsorbent specifically tailored for the removal of glyphosate (Gly) from contaminated water. To accomplish this objective, a low-cost and pure NaA Zeolite (NaAZ) was synthesized with 93% crystallinity from Austrian fly ash (AFA) as a precursor for the first-time. Taguchi design was employed to optimize critical parameters such as the SiO2/Al2O3 ratio, alkalinity concentration, time, and temperature. The cation exchange capacity (CEC) and external cation exchange capacity (ECEC) are determined as critical factors for the modification process. Subsequently, the pure NaAZ was modified with hexadecyl trimethyl ammonium chloride (HDTMAC), a cationic surfactant. The utilization of surfactant-modified zeolite (SMZ) for Gly removal demonstrates its innovative application in this field, highlighting its enhanced adsorption capacity and optimized surface properties. The AFA, NaAZ, and SMZ were characterized using analytical techniques including XRD, XRF, FTIR-ATR, SEM, TGA, BET, CHNSO analyzer and ICP-OES. The adsorbent exhibited effective Gly removal through its pH-dependent charge properties (pH 2-10), with an optimized pH 6 facilitating a significant electrostatic interaction between the adsorbent and Gly. SMZ demonstrated remarkable adsorption capacity and removal efficacy, surpassing most reported adsorbents with values of 769.23 mg/g and 98.92% respectively. Our study demonstrates the significant advantage of the SMZ, with a low leaching concentration of only 6 ppm after 60 days, ensuring environmental safety, long-term stability, and public health considerations. The kinetics of the adsorption process was well described by the pseudo-second order and the Freundlich isotherm. Pore diffusion and H-bonding were postulated to be involved in physisorption, whereas electrophilic interactions led to chemisorption type of adsorption. Consequently, SMZ provides a practical significance, broad applicability and promising solution for Gly removal, facilitating sustainable water treatment.

Ferrihydrite-loaded water hyacinth-derived biochar for efficient removal of glyphosate from aqueous solution

Ferrihydrite-loaded water hyacinth-derived biochar (FH/WHBC) was prepared by in-situ precipitation method to treat glyphosate-containing wastewater. The adsorption properties and mechanism, and actual application potential were deeply studied. Results showed that the adsorption performance of FH/WHBC was closely related with the precipitation pH condition, and the adsorbent prepared at pH 5.0 possessed the highest adsorption capacity of 116.8 mg/g for glyphosate. The isothermal and kinetic experiments showed that the adsorption of glyphosate was consistent with Langmuir model, and the adsorption process was rapid and could be achieved within 30 min. The prepared FH/WHBC was more suitable for application under high acidity environment, and could maintain the great adsorption performances in the presence of most co-existing ions. Besides, it also possessed a good regenerability. Under dynamic condition, the adsorption performance of FH/WHBC was not affected even at high flow rate and high glyphosate concentration. Furthermore, the FH/WHBC can keep excellent removal efficiency for glyphosate in wastewater treatment, and the concentration of glyphosate can be reduced to 0.06 mg·L^-1, which was lower than the groundwater quality of class II mandated in China. Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) characterization indicated that the adsorption of glyphosate on FH/WHBC was mainly accomplished through electrostatic adsorption and the formation of inner-sphere complexes. In brief, the prepared sorbent FH/WHBC was expected to be used in the treatment of industrial glyphosate wastewater.

Layered Double Hydroxide Materials: A Review on Their Preparation, Characterization, and Applications

Layered double hydroxides (LDHs), a type of synthetic clay with assorted potential applications, are deliberated upon in view of their specific properties, such as adsorbent-specific behavior, biocompatibility, fire-retardant capacity, and catalytic and anion exchange properties, among others. LDHs are materials with two-dimensional morphology, high porosity, and exceptionally tunable and exchangeable anionic particles with sensible interlayer spaces. The remarkable feature of LDHs is their flexibility in maintaining the interlayer spaces endowing them with the capacity to accommodate a variety of ionic species, suitable for many applications. Herein, some synthetic methodologies, general characterizations, and applications of LDHs are summarized, encompassing their broader appliances as a remarkable material to serve society and address several problems viz. removal of pollutants and fabrication of sensors and materials with multifaceted useful applications in the medical, electrochemical, catalytic, and agricultural fields, among others.

Engineered Sericin-Tagged Layered Double Hydroxides for Combined Delivery of Pemetrexed and ZnO Quantum Dots as Biocompatible Cancer Nanotheranostics

Despite extensive progress in the field of cancer nanotheranostics, clinical development of biocompatible theranostic nanomedicine remains a formidable challenge. Herein, we engineered biocompatible silk-sericin-tagged inorganic nanohybrids for efficient treatment and imaging of cancer cells. The developed nanocarriers are anticipated to overcome the premature release of the chemotherapeutic drug pemetrexed (PMX), enhance the colloidal stability of layered double hydroxides (LDHs), and maintain the luminescence properties of ZnO quantum dots (QDs). Materials and Methods: PMX-intercalated LDHs were modified with sericin and coupled to ZnO QDs for therapy and imaging of breast cancer cells. Results: The optimized nanomedicine demonstrated a sustained release profile of PMX, and high cytotoxicity against MDA-MB-231 cells compared to free PMX. In addition, high cellular uptake of the engineered nanocarriers into MDA-MB-231 breast cancer cells was accomplished. Conclusions: Conclusively, the LDH-sericin nanohybrids loaded with PMX and conjugated to ZnO QDs offered a promising cancer theranostic nanomedicine.

Effective Removal of Glyphosate from Aqueous Systems Using Synthesized PEG-Coated Calcium Peroxide Nanoparticles: Kinetics Study, H2O2 Release Performance and Degradation Pathways

Glyphosate (N-phosphonomethyl glycine) is a non-selective, broad-spectrum organophosphate herbicide. Its omnipresent application with large quantity has made glyphosate as a problematic contaminant in water. Therefore, an effective technology is urgently required to remove glyphosate and its metabolites from water. In this study, calcium peroxide nanoparticles (nCPs) were functioned as an oxidant to produce sufficient hydroxyl free radicals (·OH) with the presence of Fe²⁺ as a catalyst using a Fenton-based system. The nCPs with small particle size (40.88 nm) and high surface area (28.09 m²/g) were successfully synthesized via a co-precipitation method. The synthesized nCPs were characterized using transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), Brunauer-Emmett-Teller analysis (BET), dynamic light scattering (DLS), and field emission scanning electron microscopy (FESEM) techniques. Under the given conditions (pH = 3.0, initial nCPs dosage = 0.2 g, Ca²⁺/Fe²⁺ molar ratio = 6, the initial glyphosate concentration = 50 mg/L, RT), 99.60% total phosphorus (TP) removal and 75.10% chemical oxygen demand (COD) removal were achieved within 75 min. The degradation process fitted with the Behnajady-Modirshahla-Ghanbery (BMG) kinetics model. The H₂O₂ release performance and proposed degradation pathways were also reported. The results demonstrated that calcium peroxide nanoparticles are an efficient oxidant for glyphosate removal from aqueous systems.

Surface Plasmon Resonance Imaging Sensor for Detection of Photolytically and Photocatalytically Degraded Glyphosate

Glyphosate is one of the most widely used pesticides, which, together with its primary metabolite aminomethylphosphonic acid, remains present in the environment. Many technologies have been developed to reduce glyphosate amounts in water. Among them, heterogeneous photocatalysis with titanium dioxide as a commonly used photocatalyst achieves high removal efficiency. Nevertheless, glyphosate is often converted to organic intermediates during its degradation. The detection of degraded glyphosate and emerging products is, therefore, an important element of research in terms of disposal methods. Attention is being paid to new sensors enabling the fast detection of glyphosate and its degradation products, which would allow the monitoring of its removal process in real time. The surface plasmon resonance imaging (SPRi) method is a promising technique for sensing emerging pollutants in water. The aim of this work was to design, create, and test an SPRi biosensor suitable for the detection of glyphosate during photolytic and photocatalytic experiments focused on its degradation. Cytochrome P450 and TiO₂ were selected as the detection molecules. We developed a sensor for the detection of the target molecules with a low molecular weight for monitoring the process of glyphosate degradation, which could be applied in a flow-through arrangement and thus detect changes taking place in real-time. We believe that SPRi sensing could be widely used in the study of xenobiotic removal from surface water or wastewater.

Multifaceted potential applicability of hydrotalcite-type anionic clays from green chemistry to environmental sustainability

Hydrotalcite-like anionic clays (HTs) also known as Layered double hydroxides (LDHs) have been developed as multifunctional materials in numerous applications related to catalysis, adsorption, and ion-exchange processes. These materials constitute an important class of ionic lamellar solid clays of Brucite-like structure which comprise of consecutive layers of divalent and trivalent metal cations with charge balancing anions and water molecules in interlayer space. These materials have received increasing attention in research due to their interesting properties namely layered structure, ease of preparation, flexible tunability, ability to intercalate different types of anions, electronic properties, high thermal stability, high biocompatibility, and easy biodegradation. Moreover, HTs/LDHs have unique tailorable and tuneable characteristics such as both acidic and basic sites, anion exchange capability, surface area, basal spacing, memory effect, and also exhibit high exchange capacities, which makes them versatile materials for a wide range of applications and extended their horizons to diverse areas of science and technology. This study enlightens the various rational researches related to the synthetic methods and features focusing on synthesis and/or fabrication with other hybrids and their applications. The diverse applications (namely catalyst, adsorbent to toxic chemicals, agrochemicals management, non-toxic flame retardants, and recycling of plastics) of these multifunctional materials related to a clean and sustainable environment were also summarized.

Efficient removal of glyphosate from aqueous solutions by adsorption on Mg-Al-layered double oxides: thermodynamic, kinetic, and mechanistic investigation

Up to 90% of glyphosate was removed in 40 min by a 2:1 Mg2Al-layered double oxide (LDO) at pH 10, and the adsorption kinetics fitted a pseudo-second-order law. The adsorption isotherms were type L, and the Langmuir model best fitted the experimental data, with qmax of 158.22 μg/mg at 25 °C. The intraparticle diffusion model suggested that the adsorption process is dependent on the thickness and formation of the film at the solution/solid interface. The XRD results excluded the intercalation of glyphosate anions, and FTIR along with solid-state 13C and 31P MAS NMR confirmed that the glyphosate anions interact through the carboxylate and/or phosphonate moieties, both in end-on and side-on modes to the LDO surface. Glyphosate removal was also investigated in the presence of different anionic species, and simultaneous adsorption showed that carbonate and phosphate ions strongly influence glyphosate removal.

Glyphosate Pollution Treatment and Microbial Degradation Alternatives, a Review

Glyphosate is a broad-spectrum herbicide extensively used worldwide to eliminate weeds in agricultural areas. Since its market introduction in the 70's, the levels of glyphosate agricultural use have increased, mainly due to the introduction of glyphosate-resistant transgenic crops in the 90's. Glyphosate presence in the environment causes pollution, and recent findings have proposed that glyphosate exposure causes adverse effects in different organisms, including humans. In 2015, glyphosate was classified as a probable carcinogen chemical, and several other human health effects have been documented since. Environmental pollution and human health threats derived from glyphosate intensive use require the development of alternatives for its elimination and proper treatment. Bioremediation has been proposed as a suitable alternative for the treatment of glyphosate-related pollution, and several microorganisms have great potential for the biodegradation of this herbicide. The present review highlights the environmental and human health impacts related to glyphosate pollution, the proposed alternatives for its elimination through physicochemical and biological approaches, and recent studies related to glyphosate biodegradation by bacteria and fungi are also reviewed. Microbial remediation strategies have great potential for glyphosate elimination, however, additional studies are needed to characterize the mechanisms employed by the microorganisms to counteract the adverse effects generated by the glyphosate exposure.

Degradation of glyphosate in water by the application of surface corona discharges

Glyphosate (GLP) is one of the most widely applied herbicides, and is found ubiquitously in the environment. The removal of glyphosate from waste water and soil is challenging and can be achieved with chemical or biological methods, which, nevertheless, suffer from different disadvantages. The application of a physical plasma for the removal of GLP in water was examined by the application of surface corona discharges in a wire-to-cylinder setup filled with argon. The plasma was ignited at the liquid surface without any additives. By applying a photometric method, GLP was detected after derivatisation with fluorenyl methoxycarbonyl chloride, whereas phosphate was determined with ammonium molybdate. A GLP degradation rate of 90.8% could be achieved within a treatment time of 30 minutes with an estimated energy efficiency of 0.32 g/kWh.

Using Post-graphene 2D Materials to Detect and Remove Pesticides: Recent Advances and Future Recommendations

Detection and removal of pesticides have become increasingly imperative as the widespread production and use of pesticides severely contaminate soil and groundwater and cause serious problems to non-target species such as human and animals. Recently, new two-dimensional materials beyond graphene (e.g., transition metal dichalcogenides, layered double hydroxides), called post-graphene two-dimensional materials (pg-2DMs), have exhibited promising potentials in detecting and removing pesticides due to their unique physiochemical attributes such as high photocatalytic activity and large specific surface area. This review summarizes the recent advances of utilizing pg-2DMs to detect, degrade and adsorb pesticides (e.g., thiobencarb, methyl parathion, paraquat). The current gaps and future prospects of this field are discussed as well.

Synthesis of nickel-iron layered double hydroxide via topochemical approach: Enhanced surface charge density for rapid hexavalent chromium removal

Hexavalent chromium (Cr(VI)) is considered to be a potential metal contaminant because of its toxicity and carcinogenicity. In this work, the surface charge density of nickel-iron layered double hydroxide (NiFe LDH) is tuned through iron valence change to improve the performance in adsorption of Cr(VI). The addition of iron divalent in the precursor enhances the surface positivity and reducibility of Fe²⁺-NiFe LDH, resulting in a nearly 150% Cr(VI) maximum adsorption capacity improvement. The increase of hydroxyl groups and charge density on the surface of NiFe LDH is due to the topological chemical transition from Ni²⁺-Fe²⁺ LDH to Ni²⁺-Fe³⁺ LDH. The adsorption of Cr(VI) onto Fe²⁺-NiFe LDH prepared via topochemical approach is highly pH-dependent. The adsorption dynamics and isotherms results may be clearly elucidated by the pseudo-second-order model and Langmuir isotherm model. Electrostatic attraction, interlayer anion exchange and adsorption-coupled reduction are proven to be the main Cr(VI) removal mechanisms for Fe²⁺-NiFe LDH. This finding demonstrates that Fe²⁺-NiFe LDH adsorbents have potential application for efficient removal of Cr(VI) pollutants.

Effect of Preparation Methods on the Adsorption of Glyphosate by Calcined Ca-Al Hydrotalcite

Calcined Ca-Al hydrotalcites were prepared by the clean method (Ca-LDO-1) and traditional co-precipitation method (Ca-LDO-2), respectively. The effect of the preparation method on the adsorption of glyphosate by calcined Ca-Al hydrotalcites was investigated. The adsorbents were also characterized by X-ray diffraction (XRD), thermogravimetric (TG) analysis, inductively coupled plasma optical emission spectroscopy (ICP-OES), and low-temperature N2 adsorption-desorption, respectively. Compared with Ca-LDO-2, Ca-LDO-1 had higher specific surface area and pore volume, which caused it to show better adsorption performance and reusability for the adsorbing of glyphosate. In addition, the kinetics and thermodynamics of the adsorption of glyphosate by Ca-LDO-1 were studied. The results showed that it was more consistent with the pseudo-second-order kinetic equation and Langmuir isotherm equation.

A new strategy for the adsorption and removal of fenitrothion from real samples by active-extruded MOF (AE-MOF UiO-66) as an adsorbent

The adsorption and removal of hazardous materials such as fenitrothion by adsorbents with high adsorption capacities and easy separation from sample solutions are highly desirable.

Treatment technologies and degradation pathways of glyphosate: A critical review

Glyphosate is one of the most widely used post-emergence broad-spectrum herbicides in the world. This molecule has been frequently detected in aqueous environment and can cause adverse effects to plants, animals, microorganisms, and humans. This review offers a comparative assessment of current treatment methods (physical, biological, and advanced oxidation process) for glyphosate wastewaters, considering their advantages and drawbacks. As for other molecules, adsorption does not destroy glyphosate. It can be used before other processes, if glyphosate concentrations are very high, or after, to decrease the final concentration of glyphosate and its by-products. Most of biological and oxidation processes can destroy glyphosate molecules, leading to by-products (the main ones being AMAP and sarcosine) that can be or not affected by these processes. This point is of major importance to control process efficiency. That is the reason why a specific focus on glyphosate degradation pathways by biological treatment or different advanced oxidation processes is proposed. However, one process is usually not efficient enough to reach the required standards. Therefore, the combination of processes (for instance biological and oxidation ones) seems to be high-performance technologies for the treatment of glyphosate-containing wastewater, due to their potential to overcome some drawbacks of each individual process. Finally, this review provides indications for future work for different treatment processes to increase their performances and gives some insights into the treatment of glyphosate or other organic contaminants in wastewater.

Development of α- and γ-Fe2O3 decorated graphene oxides for glyphosate removal from water

In this study, the proposed adsorbent composed of graphene oxide (GO) functionalized by magnetic nanoparticles of iron oxide (α-γ-Fe2O3) was obtained by a simple ultrasonication process. This new material was used for the removal of glyphosate in water. The nanoparticulated iron oxide used was synthesized by means of a modified sol-gel method, which does not use organic solvents. The adsorbent material (GO-α-γ-Fe2O3) obtained was characterized by magnetic measurements, and it can be proved that it has superparamagnetic properties, allowing fast and efficient magnetic separation. The equilibrium time for the adsorption of glyphosate when using GO-α-γ-Fe2O3 was 2 hours and the maximum removal was 92% at 15°C, with a maximum adsorption capacity of 46.8 mg g-1. Langmuir model and pseudo-second-order kinetic model correlated satisfactorily to the experimental data. The thermodynamic parameters showed that the adsorption of glyphosate on GO-α-γ-Fe2O3 was spontaneous, exothermic and thermodynamically favorable at temperature of 15-45°C. Thus the adsorbent material GO-α-γ-Fe2O3 proposed in this study is considered a good candidate to be used in the removal of glyphosate from aqueous solutions, presenting high adsorption capacity, low cost and magnetic properties that facilitate the separation of the adsorbent material.

Water-Stable Nanoscale Zirconium-Based Metal-Organic Frameworks for the Effective Removal of Glyphosate from Aqueous Media

Two water-stable zirconium-based metal-organic frameworks (MOFs) (NU-1000 and UiO-67) have been synthesized in various size scales (100-2000 nm) for the adsorptive removal of glyphosate from the aqueous media. Both NU-1000 and UiO-67 possess a three-dimensional structure; NU-1000 consists of triangular micropores and wide mesoporous channels (31 Å), whereas UiO-67 has cage-like pores [octahedral (16 Å) and tetrahedral (14 Å) cages]. NU-1000 comprises Zr6(μ3-O)4(μ3-OH)4(H2O)4(OH)4, and UiO-67 contains Zr6O4(OH)4 as secondary building units. These units act as Lewis acid nodes and can interact with the Lewis base phosphate group of the glyphosate. The time taken for reaching equilibrium is found to be reduced considerably as the size of the MOF decreases. The smaller the particle size, the lesser is the diffusion barrier for the analyte, which enhances the interaction between Lewis acidic metal nodes and the Lewis basic center of the glyphosate molecule. NU-1000 was found to be better compared to UiO-67, both in terms of efficiency and reusability. This might be due to the larger pore diameters of the NU-1000. Theoretical calculations revealed that the interaction energy of glyphosate with the nodes of NU-1000 is higher (-37.63 KJ mol-1) compared to UiO-67 (-17.37 KJ mol-1), which might be the possible reason for the higher efficiency of NU-1000.

Modification of zeolite 4A for use as an adsorbent for glyphosate and as an antibacterial agent for water

The aim of this work was to design a low cost adsorbent for efficient and selective removal of glyphosate from water at neutral pH conditions. For this purpose, zeolite 4A, a locally abundant and cheap mineral material, was ion-exchanged with Cu2+ to produce Cu-zeolite 4A. The FTIR results revealed that the modification has no important effect on chemical structure of zeolite 4A. After modification, highly crystalline zeolite 4A was converted to amorphous Cu-zeolite 4A according to XRD studies. The SEM images showed spherical-like particles with porous surfaces for Cu-zeolite 4A compared to cubic particles with smooth surfaces for zeolite 4A. Adsorption equilibrium data were well fitted with non-linear forms of Langmuir, Freundlich and Temkin isotherms. The maximum adsorption capacity for Cu-zeolite 4A was calculated to be 112.7 mg g-1 based on the Langmuir model. The adsorption of glyphosate by the modified adsorbent had fast kinetics fitted both pseudo-first-order and pseudo-second-order models. A mechanism based on chemical adsorption was proposed for the removal process. The modified adsorbent had a good selectivity to glyphosate over natural waters common cations and anions. It also showed desired regeneration ability as an important feature for practical uses. The potential use of the developed material as antibacterial agent for water disinfection filters was also investigated by MIC method. Relatively strong antibacterial activity was observed for Cu-zeolite 4A against Gram-positive and Gram-negative model bacteria while zeolite 4A had no antibacterial properties. No release of Cu2+ to aqueous solutions was detected as unique feature of the developed material.

Solid base catalysts derived from Ca–Al–X (X = F−, Cl− and Br−) layered double hydroxides for methanolysis of propylene carbonate

The Ca–Al and Ca–Al–X (X = F⁻, Cl⁻ and Br⁻) catalysts were prepared via thermal decomposition of Ca–Al layered double hydroxides (LDHs), and tested for methanolysis of propylene carbonate (PC) to produce dimethyl carbonate (DMC). The catalytic performance of these catalysts increased in the order of Ca–Al–Br⁻ < Ca–Al < Ca–Al–Cl⁻ < Ca–Al–F⁻, which was consistent with the strong basicity of these materials. The recyclability test results showed that the addition of Al and halogens (F⁻, Cl⁻ and Br⁻) not only stabilized the CaO but also improved the recyclability of the catalysts. Particularly, the Ca–Al–F⁻ catalyst exerted the highest stability after 10 recycles. These catalysts have an important value for the exploitation of DMC synthesis by transesterification of PC with methanol.

The CA-F⁻ catalyst modified with Al³⁺ and F⁻ was highly active and recyclable for dimethyl carbonate synthesis.

Metal-Organic Frameworks Constructed from a New Thiophene-Functionalized Dicarboxylate: Luminescence Sensing and Pesticide Removal

A family of thiophene-based metal-organic frameworks (MOFs), [Zn(L)(BBI)·(H₂O)₂] (1) (BBI = 1,1'-(1,4-butanediyl)bis(imidazole)) and [Cd(L)(TPOM)_0.75]·xS (2) (TPOM = tetrakis(4-pyridyloxy-methylene) methane, S represents noncoordinated solvent molecules) was constructed by employing a new linear thiophene-functionalized dicarboxylic acid (benzo-(1,2;4,5)-bis(thiophene-2'-carboxylic acid, H₂L) to assemble with d¹⁰ ions in the presence of a flexible ancillary ligand under solvothermal conditions, which exhibit diverse structures. Most strikingly, both compounds 1 and 2 could be efficient luminescent sensory materials that are highly selective and sensitive to environmental contaminants, especially for Hg(II), Cu(II), Cr(VI), and salicylaldehyde, and yet remain unaffected by other molecules that may coexit. Furthermore, this is the first report on MOF-based sensors capable of recyclable detection of Hg(II), Cr(VI), and salicylaldehyde so far. The luminescent sensing mechanism was studied in detail as well. In addition, compound 2 is one of the rare examples of high-performance MOFs trapping 2,4-dichlorophenol from the wasted methanol solution.

Evaluation of various glyphosate concentrations on DNA damage in human Raji cells and its impact on cytotoxicity

Glyphosate is a highly used active compound in agriculturally based pesticides. The literature regarding the toxicity of glyphosate to human cells has been highly inconsistent. We studied the resulting DNA damage and cytotoxicity of various glyphosate concentrations on human cells to evaluate DNA damaging potential. Utilizing human Raji cells, DNA damage was quantified using the comet assay, while cytotoxicity was further analyzed using MTT viability assays. Several glyphosate concentrations were assessed, ranging from 15 mM to 0.1 μM. We found that glyphosate treatment is lethal to Raji cells at concentrations above 10 mM, yet has no cytotoxic effects at concentrations at or below 100 μM. Treatment concentrations of 1 mM and 5 mM induce statistically significant DNA damage to Raji cells following 30-60 min of treatment, however, cells show a slow recovery from initial damage and cell viability is unaffected after 2 h. At these same concentrations, cells treated with additional compound did not recover and maintained high levels of DNA damage. While the cytotoxicity of glyphosate appears to be minimal for physiologically relevant concentrations, the compound has a definitive cytotoxic nature in human cells at high concentrations. Our data also suggests a mammalian metabolic pathway for the degradation of glyphosate may be present.

Surfactant-modified montmorillonite as a nanosized adsorbent for removal of an insecticide: kinetic and isotherm studies

Surfactant-modified montmorillonites (MMT) were prepared using trimethyloctylammonium bromide (TMOAB) and employed as a nanosized adsorbent to remove diazinon from aqueous solutions. The prepared adsorbent was characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The dependence of removal efficiency on initial diazinon concentration, amount of adsorbent, pH of the solution and ionic strength was investigated. The affinity sequence for ion adsorption on TMOAB/MMT was in the order: without anion> sodium carbonate> sodium bicarbonate> sodium sulphate> sodium chloride. The adsorption kinetic and isotherm were best fit by a pseudo-second-order kinetic and Langmuir isotherm models, respectively.

Effective adsorption and enhanced removal of organophosphorus pesticides from aqueous solution by Zr-based MOFs of UiO-67

Though many efforts have been devoted to the adsorptive removal of hazardous materials of organophosphorus pesticides (OPs), it is still highly desirable to develop novel adsorbents with high adsorption capacities. In the current work, the removal of two representative OPs, glyphosate (GP) and glufosinate (GF), was investigated by the exceptionally stable Zr-based MOFs of UiO-67. The abundant Zr-OH groups, resulting from the missing-linker induced terminal hydroxyl groups and the inherent bridging ones in Zr-O clusters of UiO-67 particles, served as natural anchorages for efficient GP and GF capture in relation with their high affinity toward phosphoric groups in OPs. The correlation between the most significant parameters such as contact time, OPs concentration, adsorbent dose, pH, as well as ionic strength with the adsorption capacities was optimized, and the effects of these parameters on the removal efficiency of GP and GF from the polluted aqueous solution were investigated. The adsorption of GP on UiO-67 was faster than that of GF, and a pseudo-second-order rate equation effectively described the uptake kinetics. The Langmuir model exhibited a better fit to adsorption isotherm than the Freundlich model. Thanks to the strong affinity and adequate pore size, the adsorption capacities in UiO-67 approached as high as 3.18 mmol (537 mg) g(-1) for GP and 1.98 mmol (360 mg) g(-1) for GF, which were much higher than those of many other reported adsorbents. The excellent adsorption characteristics of the current adsorbents toward OPs were preserved in a wide pH window and high concentration of the background electrolytes. These prefigured the promising potentials of UiO-67 as novel adsorbent for the efficient removal of OPs from aqueous solution.

The use of BMED for glyphosate recovery from glyphosate neutralization liquor in view of zero discharge

Alkaline glyphosate neutralization liquors containing a high salinity pose a severe environmental pollution problem by the pesticide industry. However, there is a high potential for glyphosate recovery due to the high concentration of glyphosate in the neutralization liquors. In the study, a three-compartment bipolar membrane electrodialysis (BMED) process was applied on pilot scale for the recovery of glyphosate and the production of base/acid with high concentration in view of zero discharge of wastewater. The experimental results demonstrate that BMED can remove 99.0% of NaCl from the feed solution and transform this fraction into HCl and NaOH with high concentration and purity. This is recycled for the hydrolysis reaction of the intermediate product generated by the means of the Mannich reaction of paraformaldehyde, glycine and dimethylphosphite catalyzed by triethylamine in the presence of HCl and reclamation of the triethylamine catalyst during the production process of glyphosate. The recovery of glyphosate in the feed solution was over 96%, which is acceptable for industrial production. The current efficiency for producing NaOH with a concentration of 2.0 mol L(-1) is above 67% and the corresponding energy consumption is 2.97 kWh kg(-1) at a current density of 60 mA cm(-2). The current efficiency increases and energy consumption decreases as the current density decreases, to 87.13% and 2.37 kWh kg(-1), respectively, at a current density of 30 mA cm(-2). Thus, BMED has a high potential for desalination of glyphosate neutralization liquor and glyphosate recovery, aiming at zero discharge and resource recycling in industrial application.

Preparation and adsorption performance of MnO2/PAC composite towards aqueous glyphosate

Glyphosate (N-phosphonomethylglycine (PMG)) is the organophosphate herbicide most widely used in the world, and industrial production of PMG generates large quantities of wastewater. A manganese dioxide-coated powdered activated carbon (MnO2/PAC) composite was synthesized and investigated for the adsorption of PMG from wastewater. The results of scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectrometry (EDAX) revealed that MnO2 was formed on the surface of the carbon during the modification process. Batch adsorption results showed that the optimal pH for glyphosate adsorption on MnO2/PAC was 3.0. In the range 0.01(-1) molL(-1), glyphosate removal by MnO2/PAC decreased with an increase in ionic strength. Among the coexistent anions, only phosphate showed significant inhibition of PMG removal due to competitive complexation. Batch studies revealed that MnO2/PAC could reach a maximum PMG adsorption capacity of 283 mg g(-1). The Langmuir equilibrium model was found to be suitable for describing PMG sorption, and kinetic studies revealed that adsorption followed second-order rate kinetics. It was also proved that the adsorbed PMG could be effectively desorbed from MnO2/PAC in 1.0 molL(-1) NaOH. All of these results implied that the MnO2/PAC composite may be used as an effective adsorbent for recycling PMG from wastewater.

Photocatalytic mineralization of glyphosate in a small-scale plug flow simulation reactor by UV/TiO2

The present work involves the photocatalytic mineralization of glyphosate on a plug flow reactor by UV/TiO(2). The effect of catalyst loading shows an optimal value (0.4 g L(-1)) which is necessary to mineralize glyphosate. The kinetic rate of glyphosate mineralization decreases with the increasing initial concentration of glyphosate, and the data can be described using the first-order model. An alkaline environment is conducive to glyphosate mineralization. The mineralization efficiency increases with elevated flow rate to 114 mL min(-1), which is followed by a decrease with a further increase in flow rate due to the reduction of the residence time. The presence of external oxidants (K(2)S(2)O(8), H(2)O(2) and KBrO(3)) and photosencitizer (humic acid) can significantly enhance glyphosate mineralization. Photocatalysis oxidation ability of the three studied oxidants decrease in the order of: S(2)O(8)(2-) > BrO(3)(-) > H(2)O(2). Finally, the Langmuir-Hinshelwood (L-H) model was used to rationalize the mechanisms of reactions occurring on TiO(2) surfaces and L-H model constants were also determined.

Adsorption of glyphosate on resin supported by hydrated iron oxide: equilibrium and kinetic studies

Hydrated iron oxide supported on resin (D301) was prepared as a new sorbent for the removal of glyphosate from wastewater. Batch adsorption studies were performed on glyphosate aqueous solutions with different initial glyphosate concentrations and temperatures. Experimental data were analyzed using the Langmuir and Freundlich isotherms, and the adsorption data were best fit to the Langmuir isotherm model. The thermodynamic parameters AG, AH, and AS also were calculated for the adsorption processes. Adsorption rate constants were determined using the pseudo-first-order and pseudo-second-order rate equations and Kannan-Sundaram intraparticle diffusion models. Adsorption of glyphosate clearly followed the pseudo-second-order model and was controlled by both film diffusion and intraparticle diffusion.

Removal of pesticides from water and wastewater by different adsorbents: a review

In this review article, the use of various low-cost adsorbents for the removal of pesticides from water and wastewater has been reviewed. Pesticides may appear as pollutants in water sources, having undesirable impacts to human health because of their toxicity, carcinogenicity, and mutagenicity or causing aesthetic problems such as taste and odors. These pesticides pollute the water stream and it can be removed very effectively using different low-cost adsorbents. It is evident from a literature survey of about 191 recently published papers that low-cost adsorbents have demonstrated outstanding removal capabilities for pesticides.