Interaction of surfactant-modified zeolites and phosphate accumulating bacteria

Control of phosphorus release from sediment by iron/aluminum co-modified zeolite: efficiency, mechanism, and response of microbial communities in sediment

The efficiency of iron/aluminum co-modified zeolite (FeAl-Z) covering and amendment for controlling the internal loading of phosphorus (P) from sediment to the overlying water (OW) and its controlling mechanism were explored. The response of the composition of sedimentary microbial communities in sediment and their function to the FeAl-Z capping and amendment was also examined. FeAl-Z showed good removal performance for phosphate in aqueous solution. The maximum phosphate adsorption quantity for FeAl-Z at pH 7 attained 11.2 mg P/g. The release of sediment endogenous phosphorus to OW can be successfully restrained by the FeAl-Z covering and amendment, and the suppression ability of FeAl-Z covering was stronger than that of FeAl-Z amendment. Under the capping or amendment condition, FeAl-Z can effectively inactivate the labile phosphorus measured by diffusion gradient in thin film (DGT-LP) in the overlying water and surface sediment. The added FeAl-Z transformed redox-sensitive phosphorus (BD-P) to metal oxide-bound phosphorus (NaOH-IP) and residual phosphorus (Res-P) in sediment, which increased the stability of inorganic phosphorus in the sediment. The passivation of soluble reactive phosphorus (SRP) and DGT-LP in the surface sediment by FeAl-Z significantly contributed to the inhibition of sediment endogenous phosphorus release to OW by the FeAl-Z capping, and the passivation of SRP, DGT-LP and mobile phosphorus in the surface sediment played a pivotal role in the control of sediment internal phosphorus release by the FeAl-Z amendment. The FeAl-Z amendment and capping did not increase the liberation risk of Fe from sediment, and the microorganisms in the sediments under the conditions of FeAl-Z amendment and covering still can perform good ecological functions. Results of this research demonstrate that FeAl-Z capping has high application potential in the control of phosphorus transfer from sediment to OW.

Control of phosphorus release from sediment by hydrous zirconium oxide combined with calcite, bentonite and zeolite

This study investigated the effectiveness and mechanism for the control of internal phosphorus (P) liberation from sediment by hydrous zirconium oxide (HZrO₂) combined with calcite, bentonite and zeolite. The results suggested that coexisting calcite, calcium-modified bentonite (CaBT) and calcium-modified zeolite (CaZ) all had the ability to promote the adsorption of phosphate (PO₄^3-) onto HZrO₂. The mechanisms of PO₄^3- elimination by HZrO₂/calcite mixture involved the adsorption of PO₄^3- on calcite, the precipitation of PO₄^3- with Ca²⁺, and the inner-sphere complexation of PO₄^3- with HZrO₂. The amendment of sediment with HZrO₂/calcite, HZrO₂/CaBT or HZrO₂/CaZ mixture can effectively prevent the sedimentary P release, and the immobilization of mobile P in the sediment and the uptake of dissolved reactive P (DRP) from the interstitial water by the amendment material played a key role in the control of P release from sediment by the combined amendment. Capping sediment with HZrO₂/calcite, HZrO₂/CaBT or HZrO₂/CaZ mixture also can effectively intercept sediment P release, and the formation of P static layer attributed to the uptake of interstitial water DRP and DGT (diffusive gradient in thin-films)-unstable P in the upper sediment by the capping material was a key to the inhibition of sedimentary P migration into the overlying water by the combined capping. The great majority of P immobilized by the HZrO₂/calcite, HZrO₂/CaBT or HZrO₂/CaZ combined covering layer is stable P and it has a low re-releasing risk under dissolved oxygen-deficit and pH 5-9 condition. The stability of P bound by the combined covering layer was larger than that by the single HZrO₂ covering layer. The results of this research show that the combined use of HZrO₂ and calcite, HZrO₂ and CaBT, or HZrO₂ and CaZ as a capping material has great potential in the reduction of sediment P loading.

Influence of the Type and the Amount of Surfactant in Phillipsite on Adsorption of Diclofenac Sodium

Modified phillipsite samples were prepared with two different amounts (monolayer and bilayer coverage) of surfactants octadecyldimethylbenzylammonium chloride (O) and dodecylamine (D). Composites were characterized by Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR–ATR), thermal analysis and determination of zeta potential, and subsequently tested for removal of diclofenac sodium (DCF). Drug adsorption experiments were performed under different initial DCF concentrations and different contact times. In order to investigate the influence of the chemical structure of surfactants used for modification of phillipsite on the preparation and properties of composites and DCF adsorption, experimental data were compared with previously published results on DCF adsorption by composites containing phillipsite and the same amounts of surfactants cetylpyridinium chloride (C) and Arquad®2HT-75 (A). DCF adsorption isotherms for O and D composites showed a better fit with the Langmuir model with maximum adsorption capacities between 12.3 and 38.4 mg/g and are similar to those for C and A composites, while kinetics run followed a pseudo-second-order model. Composites containing either benzyl or pyridine functional groups showed higher adsorption of DCF, implying that surfactant structure has a significant impact on drug adsorption. Drug adsorption onto O, D, C and A composites was also confirmed by FTIR–ATR spectroscopy and zeta potential measurements.

Application of Surfactant Modified Natural Zeolites for the Removal of Salicylic Acid-A Contaminant of Emerging Concern

This work aimed to test composites (surfactant modified zeolites prepared by treatment of natural zeolites—clinoptilolite (IZ CLI) and/or phillipsite (PHIL75)-rich tuffs with two different amounts of cationic surfactants: cetylpyridinium chloride (CPyCl) and Arquad^® 2HT-75 (ARQ)) for the adsorption of salicylic acid (SA)—a common contaminant of emerging concern. Adsorption of SA was studied at different initial drug concentrations (in the range of 2–100 mg/L) in water solution. The Langmuir isotherm model showed the highest adsorption was achieved by bilayer composite of IZ CLI and CPyCl—around 11 mg/g. Kinetic runs were performed by using the initial drug concentration of 20 mg/L in the time interval from 0 to 75 min and pseudo-second order had good correlation with experimental data. The influence of the four different temperatures on the SA adsorption was also investigated and thermodynamic parameters suggested that the adsorption drug onto composites is an exothermic and nonspontaneous process, followed by the decrease of randomness at the solid/liquid interface during the adsorption. Zeta potential and Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) had been performed for the characterization of composites after adsorption of SA confirming the presence of the drug at composite surfaces.

Removal of non-steroidal anti-inflammatory drugs from water by zeolite-rich composites: The interference of inorganic anions on the ibuprofen and naproxen adsorption

Composites of two natural zeolites - clinoptilolite and phillipsite, and cationic surfactants (cetylpyridinium chloride and Arquad® 2HT-75) were tested for the removal of two emerging contaminants - ibuprofen and naproxen. For each zeolite-rich rock, two different modifications of the zeolitic surfaces were prepared (monolayer and bilayer surfactant coverage). The influence of the initial drug concentrations and contact time on adsorption of these drugs was followed in buffer solution. The Langmuir model showed the highest adsorption capacity for the composite characterized by a bilayered surfactant at the clinoptilolite surface: 19.7 mg/g and 16.1 mg/g for ibuprofen and naproxen, respectively. Also, to simulate real systems, drug adsorption isotherms were conducted in natural water (Grindstone creek water - Columbia, Missouri, USA) by using the best performing adsorbent; in this case, a slight decrease of drug adsorption was recorded. Kinetic runs were performed in distilled water as well as in the presence of ions such as sulfates and bicarbonates; also, in this case, the interfering agents defined an adsorption decrease for bilayer composites.

Combined use of calcium nitrate, zeolite, and anion exchange resin for controlling phosphorus and nitrogen release from sediment and for overcoming disadvantage of calcium nitrate addition technology

Ca(NO₃)₂ addition has proved to have a high potential to immobilize internal phosphorus (P) in sediments; however, it cannot effectively stop the release of ammonium-nitrogen (NH₄⁺-N) from sediments into overlying waters (OL-waters). Additionally, the addition of Ca(NO₃)₂ alone has high risk of nitrate-nitrogen (NO₃^--N) releasing into OL-waters. To overcome the shortcoming of the Ca(NO₃)₂ addition method, we reported an integrated method, i.e., a combined method based on Ca(NO₃)₂ injection, zeolite capping, and anion exchange resin (AERN)-contained floating system suspending (Ca(NO₃)₂/zeolite/AERN). The effectiveness and mechanism of the Ca(NO₃)₂/zeolite/AERN method for simultaneously controlling the release of soluble reactive P (SRP) and NH₄⁺-N were investigated, and the NO₃^--N releasing risk of this method was evaluated. It was found that the joint use of Ca(NO₃)₂ injection, zeolite capping, and AERN-contained floating system suspending not only could effectively suppress the release of SRP and NH₄⁺-N from sediments into OL-waters simultaneously, but also had much less risk of NO₃^--N releasing into OL-waters as compared to the single Ca(NO₃)₂ injection method and the combined Ca(NO₃)₂/zeolite method. The inhibition of the reductive dissolution of the P-bound Fe(III) oxides/hydroxides by the presence of nitrate and the adsorption of ammonium on the zeolite played very important roles in the interception of SRP and NH₄⁺-N releasing into OL-waters by the Ca(NO₃)₂/zeolite/AERN method. After the sediment remediation using the Ca(NO₃)₂/zeolite/AERN approach, the increase in the content of residual P in the sediment layer of 0-50 mm, the decrease of mobile P in the sediment layer of 0-10 mm, and the increased NH₄⁺-N adsorption capacity for the sediment layer of 0-10 mm would be conductive to the interception of SRP and NH₄⁺-N liberation in the long run. Results of this research suggest a promising application potential of the Ca(NO₃)₂/zeolite/AERN method in the simultaneous control of the release of SRP and NH₄⁺-N from sediments.

Simultaneous control of nitrogen and phosphorus release from sediments using iron-modified zeolite as capping and amendment materials

The use of zeolite as a geo-engineering tool has a high potential to control nitrogen (N) release from sediments, but its efficiency for controlling sedimentary phosphorus (P) release still need to be further increased. To address this issue, this work synthesized an iron-modified zeolite (IM-Z) by coating iron onto the surface of natural zeolite (NAT-Z) and then the as-obtained IM-Z was utilized as a geo-engineering material to block the upward mobilization of N and P from sediments to the overlying water. The efficiencies of IM-Z covering and amendment to prevent the liberation of N and P from sediments were evaluated, and the controlling mechanism was explored. Capping and amendment with IM-Z not only resulted in the tremendous reduction of the levels of ammonium-N (NH₄⁺-N) and reactive soluble P (RSP) in the overlying water, but also led to the decrease of the contents of NH₄⁺-N and RSP in the pore water. More importantly, sediment capping and amendment with IM-Z resulted in the formation of a static layer in the upper sediment directly below the sediment-water interface, with very low concentration of RSP in the pore water. In addition, IM-Z capping and addition effectively immobilized the diffusive gradients in thin films (DGT)-labile P in the overlying water and sediment. Furthermore, the decrease of the DGT-labile Fe concentrations in the overlying water as well as the top sediment were also observed after IM-Z capping and addition. Nearly 70% of P bound by IM-Z is stable and difficult to be released back into the overlying water under common pH and anoxic conditions. The adsorption of pore water NH₄⁺-N on IM-Z, the immobilization of pore water RSP and DGT-labile P by IM-Z and the uptake of DGT-labile Fe on IM-Z played a significant role in the simultaneous control of NH₄⁺-N and RSP liberation. Compared to NAT-Z, the efficiency of IM-Z to block the liberation of sedimentary P was higher. Results of this study demonstrate that IM-Z is suitable for use in the simultaneous interception of the upward transportation of NH₄⁺-N and RSP from sediments into the overlying water.

Removal behaviors and mechanisms of orthophosphate and pyrophosphate by calcined dolomite with ferric chloride assistance

Phosphate is one of the main contaminations in water, so an effective method of decreasing or removing phosphate is needed. The main purpose of this paper is to synthesize CaFe-LDHs and MgFe-LDHs from the mixture of calcined dolomite and ferric chloride to remove orthophosphate and pyrophosphate. The study showed that removal of orthophosphate was attributed to the precipitation by Ca²⁺ and adsorption by MgFe-LDHs, where the former played a main role. As for pyrophosphate, it was mainly removed by precipitation at the initial pyrophosphate concentration ranging from 3.228 to 17.04 mmol/L. When the initial concentrations became relatively higher, the removal efficiency of pyrophosphate decreased because the complexation effects by Fe³⁺, Ca²⁺ and Mg²⁺ took place.

Revealing the effect of preparation parameters on zeolite adsorption performance for low and medium concentrations of ammonium

The effect of preparation parameters on the performance of zeolite for ammonium (20-300 mg N/L) adsorption from simulated wastewater is reported. It was found that the ratios of Na₂O/SiO₂ and Si/Al had a more important influence than crystallization time on zeolite adsorption properties. Relatively low Na₂O/SiO₂ ratios were beneficial for fabrication of zeolites with high proportions of micropore area and volume, which led to the surface adsorption mechanism being dominated by surface free energy and pore effects. However, with decreasing Si/Al ratios, the effect of ion-exchange was more prominent due to the high negative surface potential of zeolite. In addition, the concentration of weak acid sites on the zeolites was increased with lower ratios of Na₂O/SiO₂ and Si/Al, which may promote ammonium removal. Therefore, the most effective zeolite for ammonium removal, which was fabricated at Na₂O/SiO₂ = 1.375, Si/Al = 4 and crystallization time of 48 hr, exhibited the cooperative effects of adsorption, ion-exchange and a large amount of weak acid sites. The maximum ammonium adsorption capacity (35.06 ± 0.98 mg/g) and the removal efficiency (94.44% ± 4.00%) were obtained at the dosage of 4.0 g/L zeolite NaX at ammonium concentrations of 300 mg N/L and 20 mg N/L, respectively. The Freundlich isotherm and pseudo-first-order kinetics models provided excellent fitting for the ammonium adsorption process. In addition, zeolite NaX showed about 1.23-3.2 times the ammonium adsorption capacity of clinoptilolite. The stable and efficient reusability of zeolite NaX after five regeneration cycles demonstrated that this adsorbent has considerable potential for practical industrial applications.

Performance of surfactant-modified *BEA-type zeolite nanosponges for the removal of nitrate in contaminated water: Effect of the external surface

Hierarchical *BEA-type nanosponges zeolite with a high external surface area (116 m².g^-1) and small crystal size, synthesized in the presence of a dual-porogenic organic compound, were modified with a cationic surfactant (HDTMA⁺Br^-: hexadecyltrimethyl ammonium bromide) in order to create a new anion exchanger system: the surfactant-modified zeolite nanosponges (SMZ_NS). For comparison, two other surfactant-modified *BEA-type zeolite materials, SMZ_MC and SMZ_NC, were obtained by modifying the synthesized conventional micron-size microcrytals and nanocrystals *BEA-type zeolite with HDTMA⁺Br^-, respectively. Textural and structural properties were determined for the three prepared materials using N₂ adsorption/desorption analysis, XRD, SEM, and TEM. Nitrate adsorption isotherms were drawn in a large concentration range [0.8-24.2 mmol.L^-1] and fitted with Langmuir isotherm model. The maximum nitrate removal capacity (1338 mmol.Kg^-1/83 mg.g^-1) was obtained for SMZ_NS material. This value is the highest ever observed for nitrate removal using surfactant-modified zeolite. The nitrate removal kinetics were fitted with the pseudo second-order model for both materials SMZ_NS and SMZ_NC.

Potential of Zeolite and Algae in Biomass Immobilization

The interest in utilizing algae for wastewater treatment has been increased due to many advantages. Algae-wastewater treatment system offers a cost-efficient and environmentally friendly alternative to conventional treatment processes such as electrocoagulation and flocculation. In this biosystem, algae can assimilate nutrients in the wastewater for their growth and simultaneously capture the carbon dioxide from the atmosphere during photosynthesis resulting in a decrease in the greenhouse gaseousness. Furthermore, the algal biomass obtained from the treatment process could be further converted to produce high value-added products. However, the recovery of free suspended algae from the treated effluent is one of the most important challenges during the treatment process as the current methods such as centrifugation and filtration are faced with the high cost. Immobilization of algae is a suitable approach to overcome the harvesting issue. However, there are some drawbacks with the common immobilization carriers such as alginate and polyacrylamide related to low stability and toxicity, respectively. Hence, it is necessary to apply a new carrier without the mentioned problems. One of the carriers that can be a suitable candidate for the immobilization is zeolite. To date, various types of zeolite have been used for the immobilization of cells of bacteria and yeast. If there is any possibility to apply them for the immobilization of algae, it needs to be considered in further studies. This article reviews cell immobilization technique, biomass immobilization onto zeolites, and algal immobilization with their applications. Furthermore, the potential application of zeolite as an ideal carrier for algal immobilization has been discussed.

Natural and surfactant modified zeolites: A review of their applications for water remediation with a focus on surfactant desorption and toxicity towards microorganisms

The objective of this review is to highlight the need for further investigation of microbial toxicity caused by desorption of surfactant from Surfactant Modified Zeolite (SMZ). SMZ is a low cost, versatile permeable reactive media which has the potential to treat multiple classes of contaminants. With this combination of characteristics, SMZ has significant potential to enhance water and wastewater treatment processes. Surfactant desorption has been identified as a potential issue for the ongoing usability of SMZ. Few studies have investigated the toxicity of surfactants used in zeolite modification towards microorganisms and fewer have drawn linkages between surfactant desorption and surfactant toxicity. This review provides an overview of natural zeolite chemistry, characteristics and practical applications. The chemistry of commonly used surfactants is outlined, along with the kinetics that drive their adsorption to the zeolite surface. Methodologies to characterise this surfactant loading are also described. Applications of SMZ in water remediation are highlighted, giving focus to applications which deal with biological pollutants and where microorganisms play a role in the remediation process. Studies that have identified surfactant desorption from SMZ are outlined. Finally, the toxicity of a commonly used cationic surfactant towards microorganisms is discussed. This review highlights the potential for surfactant to desorb from the zeolite surface and the need for further research into the toxicity of this desorbed surfactant towards microorganisms, including pathogens and environmental microbes.

Dye removal of AR27 with enhanced degradation and power generation in a microbial fuel cell using bioanode of treated clinoptilolite-modified graphite felt

This work studied the performance of a laboratory-scale microbial fuel cell (MFC) using a bioanode that consisted of treated clinoptilolite fine powder coated onto graphite felt (TC-MGF). The results were compared with another similar MFC that used a bare graphite felt (BGF) bioanode. The anode surfaces provided active sites for the adhesion of the bacterial consortium (NAR-2) and the biodegradation of mono azo dye C.I. Acid Red 27. As a result, bioelectricity was generated in both MFCs. A 98% decolourisation rate was achieved using the TC-MGF bioanode under a fed-batch operation mode. Maximum power densities for BGF and TC-MGF bioanodes were 458.8 ± 5.0 and 940.3 ± 4.2 mW m^-2, respectively. GC-MS analyses showed that the dye was readily degraded in the presence of the TC-MGF bioanode. The MFC using the TC-MGF bioanode showed a stable biofilm with no biomass leached out for more than 300 h operation. In general, MFC performance was substantially improved by the fabricated TC-MGF bioanode. It was also found that the TC-MGF bioanode with the stable biofilm presented the nature of exopolysaccharide (EPS) structure, which is suitable for the biodegradation of the azo dye. In fact, the EPS facilitated the shuttling of electrons to the bioanode for the generation of bioelectricity.

Simultaneous removal of ammonium and nitrate by HDTMA-modified zeolite

In this study, surfactant (hexadecyltrimethylammonium, HDTMA) modified zeolite (clinoptilolite) (SMZ) was used for simultaneous removal of ammonium and nitrate in wastewater, and the sorption properties of SMZ were determined. Results showed that natural clinoptilolite had good affinity for ammonium, but low sorption ability for nitrate, and the ammonium sorption process was well described by the pseudo-second order kinetic model. The SMZ had a significant enhancement on nitrate sorption and could simultaneously remove ammonium and nitrate at specific conditions, with removal efficiency up to 93.6% and 81.8%, respectively. The sorption process fitted well with the Langmuir isotherm. Orthogonal experiments showed that ammonium concentration was the most important factor for ammonium sorption on SMZ. However, surfactant loading was the major factor for nitrate sorption. Meanwhile, phosphate did not interfere with nitrate removal. Semi-empirical quantum mechanics molecular simulation indicated that electrostatic attraction existed between HDTMA and nitrate. Results of this study demonstrated that SMZs may have great potential for removing cations and anions simultaneously in the aquatic environment.

Immobilization of phosphorus from water and sediment using zirconium-modified zeolites

Adding sorbents to sediments has been suggested as an effective technology for contaminated sediment remediation. In this study, a zirconium-modified zeolite (ZrMZ) was prepared, characterized, and used as a sediment amendment to control phosphorus (P) release from eutrophic lake sediments. The efficiency of ZrMZ in immobilizing P from water and sediments was investigated through a series of experiments. The phosphate adsorption capacity for ZrMZ decreased with increasing water pH. The adsorption of phosphate on ZrMZ followed a pseudo-second-order kinetic model. The equilibrium adsorption data of phosphate on ZrMZ could be well described by the Langmuir isotherm model with a maximum monolayer adsorption capacity of 10.2 mg P/g at pH 7 and 25 °C. Sequential extraction of P from the phosphate-adsorbed ZrMZ suggested that most of P bound by ZrMZ existed as the NaOH extractable P (NaOH-P) and residual P (Res-P) and was unlikely to be released under natural pH and reducing conditions. The addition of ZrMZ into sediments reduced the inorganic P activity in the sediments by transforming bicarbonate-dithionite extractable P (BD-P) to NaOH-P and Res-P. The contents of bioavailable P such as water-soluble P (WS-P), NaHCO3 extractable P (Olsen-P), and algal available P (AAP) in sediments reduced after the sediments were mixed with ZrMZ, making P in the sediments more stable. The addition of ZrMZ into sediments significantly reduced the releasing flux of P from the sediments to the water column under different conditions. Results of this study indicate that the ZrMZ is a promising sediment amendment for controlling the internal P loading of lake sediments.

Studies of anions sorption on natural zeolites

This work presents results of FT-IR spectroscopic studies of anions-chromate, phosphate and arsenate - sorbed from aqueous solutions (different concentrations of anions) on zeolites. The sorption has been conducted on natural zeolites from different structural groups, i.e. chabazite, mordenite, ferrierite and clinoptilolite. The Na-forms of sorbents were exchanged with hexadecyltrimethylammonium cations (HDTMA(+)) and organo-zeolites were obtained. External cation exchange capacities (ECEC) of organo-zeolites were measured. Their values are 17mmol/100g for chabazite, 4mmol/100g for mordenite and ferrierite and 10mmol/100g for clinoptilolite. The used initial inputs of HDTMA correspond to 100% and 200% ECEC of the minerals. Organo-modificated sorbents were subsequently used for immobilization of mentioned anions. It was proven that aforementioned anions' sorption causes changes in IR spectra of the HDTMA-zeolites. These alterations are dependent on the kind of anions that were sorbed. In all cases, variations are due to bands corresponding to the characteristic Si-O(Si,Al) vibrations (occurring in alumino- and silicooxygen tetrahedra building spatial framework of zeolites). Alkylammonium surfactant vibrations have also been observed. Systematic changes in the spectra connected with the anion concentration in the initial solution have been revealed. The amounts of sorbed CrO4(2-), AsO4(3-) and PO4(3-) ions were calculated from the difference between their concentrations in solutions before (initial concentration) and after (equilibrium concentration) sorption experiments. Concentrations of anions were determined by spectrophotometric method.

Tailored zeolites for the removal of metal oxyanions: overcoming intrinsic limitations of zeolites

This review aims to present a global view of the efforts conducted to convert zeolites into efficient supports for the removal of heavy metal oxyanions. Despite lacking affinity for these species, due to inherent charge repulsion between zeolite framework and anionic species, zeolites have still received considerable attention from the scientific community, since their versatility allowed tailoring them to answer specific requirements. Different processes for the removal and recovery of toxic metals based on zeolites have been presented. These processes resort to modification of the zeolite surface to allow direct adsorption of oxyanions, or by combination with reducing agents for oxyanions that allow ion-exchange with the converted species by the zeolite itself. In order to testify zeolite versatility, as well as covering the wide array of physicochemical constraints that oxyanions offer, chromium and arsenic oxyanions were selected as model compounds for a review of treatment/remediation strategies, based on zeolite modification.

Resistance of bioparticles formed of phosphate-accumulating bacteria and zeolite to harsh environmental conditions

Extreme environmental conditions, such as pH fluctuations, high concentrations of toxicants or grazing of protozoa, can potentially be found in wastewater treatment systems. This study was carried out to provide specific evidence on how 'bioparticles' can resist these conditions. The term 'bioparticle' is used to describe a particle comprising natural zeolitized tuff with a developed biofilm of the phosphate-accumulating bacterial species, Acinetobacter junii, on the surface. The bacteria in the biofilm were protected from the negative influence of extremely low pH, high concentrations of benzalkonium-chloride and grazing by Paramecium caudatum and Euplotes affinis, even under conditions that caused complete eradication of planktonic bacteria. During an incubation of 24 h, the biofilms were maintained and bacteria detached from the bioparticles, thus bioaugmenting the wastewater. The bioparticles provided a safe environment for the survival of bacteria in harsh environmental conditions and could be used for successful bioaugmentation in wastewater treatment plants.

Short-cut nitrification in biological aerated filters with modified zeolite and nitrifying sludge

Autotrophic domestication for short-cut nitrification (SCN) and microorganism immobilization was carried out in a lab-scale biological aerated filters (BAFs) system with activated sludge. Zeolite was chosen as fillings and modified to enlarge the specific surface and to remove toxic metal ions. After thirty-day domestication and immobilization, the NH4(+)-N removal capacity increased to 76.51 mg/g dry sludge (DS) and the ratio of NO2(-)-N converted from NH4(+)-N reached to 91.2% finally. The analysis of growth kinetics indicated that free ammonia should be the key factor for SCN. The abundance variation of nitrifiers, measured by qPCR, showed that AOB was enriched successfully and NOB was washed out. The results also showed that modified zeolite should be more beneficial to the specific immobilization of AOB than natural zeolite. The shift in the community structure of AOB during the domestication by DGGE profile was investigated.

Antibacterial activity of heavy metal-loaded natural zeolite

The antibacterial activity of natural zeolitized tuffs containing 2.60wt.% Cu(2+), 1.47 Zn(2+) or 0.52 Ni(2+) were tested. Antibacterial activities of the zeolites against Escherichia coli and Staphylococcus aureus were tested after 1h and 24h of exposure to 1g of the zeolite in 100mL of three different media, namely Luria Bertani, synthetic wastewater and secondary effluent wastewater. The antibacterial activities of the zeolites in Luria Bertani medium were significantly lower than those in the other media and negatively correlated with the chemical oxygen demand of the media. The Ni-loaded zeolite showed high leaching of Ni(2+) (3.44-9.13wt.% of the Ni(2+) loaded) and weak antibacterial activity in the effluent water. Since Cu-loaded zeolite did not leach Cu(2+) and the leaching of Zn(2+) from Zn-loaded zeolite was low (1.07-1.61wt.% of the Zn(2+) loaded), the strong antibacterial activity classified the Cu- and Zn-loaded zeolite as promising antibacterial materials for disinfection of secondary effluent water.

Adsorption of tannic acid from aqueous solution onto surfactant-modified zeolite

Surfactant-modified zeolites (SMZs) with various loadings of cetylpyridinium bromide (CPB) were used as adsorbents to remove tannic acid (TA) from aqueous solution. The TA adsorption efficiencies for natural zeolite and various SMZs were compared. SMZ presented higher TA adsorption efficiency than natural zeolite, and SMZ with higher loading amount of CPB exhibited higher TA adsorption efficiency. The adsorption of TA onto SMZ as a function of contact time, initial adsorbate concentration, temperature, ionic strength, coexisting Cu(II) and solution pH was investigated. The adsorbents before and after adsorption were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. The adsorption kinetics of TA onto SMZ with CPB bilayer coverage (SMZ-CBC) followed a pseudo-second-order model. The equilibrium adsorption data of TA onto SMZ-CBC were well represented by Langmuir, Redlich-Peterson and Sips isotherm models. The calculated thermodynamic parameters indicated that TA adsorption onto SMZ-CBC was spontaneous and exothermic. The TA adsorption capacity for SMZ-CBC slightly decreased with increasing ionic strength but significantly increased with increasing Cu(II) concentration. The TA adsorption capacity for SMZ-CBC was relatively high at solution pH 4.0-7.0, and decreased with an increase in solution pH from 7.0 to 8.5. The mechanisms controlling TA adsorption onto SMZ-CBC at solution pH 5.5 include electrostatic attraction, hydrogen bonding and organic partitioning.

Selective immobilization of Acinetobacter junii on the natural zeolitized tuff in municipal wastewater

The immobilization of desired bacteria onto material was usually performed in synthetic media. The aim of this study was to test the immobilization of phosphate (P)-accumulating bacteria Acinetobacter junii onto natural zeolitized tuff (NZ) in the raw or sterilized municipal wastewater containing the common bacteria Escherichia coli and Enterococcus faecalis and the performance of immobilized A. junii in the same type of wastewater. In the sterilized wastewater which contained the mixture of A. junii, E. coli and E. faecalis, the A. junii was selectively immobilized onto NZ in significantly higher numbers than E. coli and E. faecalis. The A. junii added in the form of bioparticles to the wastewater containing E. coli and E. faecalis, multiplied and removed P from wastewater. The P removal from wastewater was a function of biomass of P-accumulating bacteria and not the amount of NZ or bioparticles used. The performance of A. junii was significantly better in membrane filtered than in autoclaved wastewater. The experiments that were performed in raw non sterilized wastewater showed that A. junii can be successfully immobilized onto NZ in competition with natively present heterotrophic bacteria, retain its metabolic activity and successfully remove P from such water, which makes this technology feasible from biotechnological aspect.

Removal of nitrate from aqueous solution using cetylpyridinium bromide (CPB) modified zeolite as adsorbent

Surfactant modified zeolites (SMZ) with different coverage types were prepared by loading the cetylpyridinium bromide (CPB) onto the surface of the natural zeolites. The adsorption behavior of nitrate on SMZ was investigated. Natural zeolite and SMZ with monolayer CPB coverage were inefficient for the removal of nitrate from aqueous solution. However, SMZ with patchy bilayer or bilayer CPB coverage was efficient in nitrate removal, and the nitrate adsorption capacity of SMZ increased with its CPB loading. For typical SMZ with bilayer CPB coverage, the nitrate adsorption process was well described by the pseudo-second-order kinetic model, and the experimental isotherm data fitted well with the Langmuir, Freundlich and Dubinin-Redushkevich isotherm models. Thermodynamic parameters such as Gibbs free energy change, enthalpy change and entropy change were calculated and the results showed that the adsorption of nitrate on SMZ was spontaneous and exothermic in nature. The presence of competing anions such as chloride, sulfate and bicarbonate ions slightly reduced the nitrate adsorption efficiency. Anionic exchange and electrostatic interaction were proven to be the main mechanisms that govern the adsorption of nitrate on SMZ.

On the zinc sorption by the Serbian natural clinoptilolite and the disinfecting ability and phosphate affinity of the exhausted sorbent

The Serbian natural zeolite is moderately effective in removing the zinc(II) ions from aqueous solutions. At 298 K the sorption capacity varies from 13 to 26% for the initial Zn(II) solution concentration of 100 and 600 mg Zndm(-3), respectively. The sorption isotherm at 298-338 K is best represented by the Langmuir model and the sorption kinetics by the pseudo-second-order model. The sorption involves a combination of film diffusion, intra-particle diffusion, and a chemical cation-exchange between the Na(+) ions of clinoptilolite and Zn(2+) ions. The sorption was found to be endothermic and spontaneous in the 298-338 K range. The exhausted sorbent can remove phosphate ions and it exhibits an excellent antibacterial activity towards Acinetobacter junii. By dehydration at about 500 °C it transforms to a ZnO-containing product featuring nano-sized wurtzite ZnO particles widespread over the clinoptilolite surface.

Evaluation of sediment capping with active barrier systems (ABS) using calcite/zeolite mixtures to simultaneously manage phosphorus and ammonium release

The efficiency and mechanism of sediment capping with an active barrier system (ABS) using calcite/zeolite mixtures to simultaneously prevent phosphorus (P) and ammonium (NH(4)(+)) release from eutrophic lake sediments under anaerobic conditions was investigated through a series of batch and sediment incubation experiments. For this, natural calcite and various zeolites (natural, NaCl-pretreated and CaCl(2)-pretreated zeolites) were applied. Batch tests showed that the calcite was efficient for the removal of phosphate in aqueous solution and the zeolite was an efficient adsorbent for the removal of NH(4)(+) from aqueous solution. Sediment incubation experiments showed that the P and NH(4)(+) fluxes from the anaerobic sediments were significantly reduced by the ABS using the mixture of calcite and natural zeolite. Higher calcite dosage was found to be favorable for the prevention of P release from the sediments using the ABS. For controlling the P release from the sediments, the mixture of calcite and CaCl(2)-pretreated zeolite as a capping material was more efficient than that of calcite and natural zeolite, whereas the mixture of calcite and NaCl-pretreated zeolite was less efficient than that of calcite and natural zeolite. Batch and sediment incubation experiments proved that the zeolite as a component of the ABS using the mixture of calcite and CaCl(2)-pretreated zeolite has a dual function: (i) preventing NH(4)(+) release from the sediments; and (ii) supplying Ca(2+) through a Ca(2+)/NH(4)(+) exchange to improve the ability of the capping material to immobilize P release from the sediments.

Requirement of Acinetobacter junii for magnesium, calcium and potassium ions

The goal of this study was to determine the concentrations of Mg, Ca and K ions required for the formation of metabolically active population of phosphate (P)-accumulating bacterium Acinetobacter junii. The availability of Mg, Ca and K originating from natural minerals in the conditions of severe shortage of these cations was tested. In the case of shortage of Mg, Ca and K ions in wastewater the P removal was absent due to the decay of A. junii. In the cases of Mg or K shortage in wastewater the P removal was negligible due to the decay of A. junii, while Ca was not essential for the examined bacterium. The minimal required concentrations of Mg and K in synthetic wastewater were 0.64 mg Mg/mg P and 0.50 mg K/mg P. The natural zeolitized tuffs and bentonite, either in Mg, Ca or K form, successfully replaced the lack of Mg, Ca, K and trace metals in wastewater. The requirement of A. junii for examined cations was in the order: Mg>K>Ca.