A laboratory feasibility study on a new electrokinetic nutrient injection pattern and bioremediation of phenanthrene in a clayey soil

Hybrid and enhanced electrokinetic system for soil remediation from heavy metals and organic matter

The electrokinetic (EK) process has been proposed for soil decontamination from heavy metals and organic matter. The advantages of the EK process include the low operating energy, suitability for fine-grained soil decontamination, and no need for excavation. During the last three decades, enhanced and hybrid EK systems were developed and tested for improving the efficiency of contaminants removal from soils. Chemically enhanced-EK processes exhibited excellent efficiency in removing contaminants by controlling the soil pH or the chemical reaction of contaminants. EK hybrid systems were tested to overcome environmental hurdles or technical drawbacks of decontamination technologies. Hybridization of the EK process with phytoremediation, bioremediation, or reactive filter media (RFM) improved the remediation process performance by capturing contaminants or facilitating biological agents' movement in the soil. Also, EK process coupling with solar energy was proposed to treat off-grid contaminated soils or reduce the EK energy requirements. This study reviews recent advancements in the enhancement and hybrid EK systems for soil remediation and the type of contaminants targeted by the process. The study also covered the impact of operating parameters, imperfect pollution separation, and differences in the physicochemical characteristics and microstructure of soil/sediment on the EK performance. Finally, a comparison between various remediation processes was presented to highlight the pros and cons of these technologies.

Construction of an effective method combining in situ capping with electric field-enhanced biodegradation for treating PAH-contaminated soil at abandoned coking sites

The simultaneous application of in situ capping and electro-enhanced biodegradation may be a suitable method for ensuring the feasibility and safety of reusing abandoned coking sites. However, the capping layer type and applied electric field pattern may affect the efficiency of sequestering and removing pollutants. This study investigated changes in electric current, soil moisture content and pH, polycyclic aromatic hydrocarbon (PAH) concentration, bacterial number, and microbial community structure and metabolic function during soil remediation at abandoned coking plant sites under different applied electric field patterns and barrier types. The results indicated that polarity-reversal electric field was more conducive to maintaining electric current, soil properties, resulting in higher microbial number, community diversity, and functional gene abundance. At 21d, the mean PAH concentrations in contaminated soil, the capping layer's clean soil and barrier were 78.79, 7.56, and 1.57 mg kg-1 lower than those with a unidirectional electric field, respectively. The mean degradation rate of PAHs in the bio-barrier was 10.12 % higher than that in the C-Fe barrier. In the experiment combining a polarity-reversal electric field and a bio-barrier, the mean PAH concentrations in contaminated soil and the capping layer were 706.68 and 27.15 mg kg-1 lower than those in other experiments, respectively, and no PAHs were detected in the clean soil, demonstrating that the combination of the polarity-reversal electric field and the bio-barrier was effective in treating soil at abandoned coking plant sites. The established method of combining in situ capping with electro-enhanced biodegradation will provide technical support for the treatment and reuse of heavily PAH-contaminated soil at abandoned coking plant sites.

Effect of electric fields strength on soil factors and microorganisms during electro-bioremediation of benzo[a]pyrene-contaminated soil

Electro-bioremediation is a promising technology for remediating soils contaminated with polycyclic aromatic hydrocarbons (PAHs). However, the resulting electrokinetic effects and electrochemical reactions may inevitably cause changes in soil factors and microorganism, thereby reducing the remediation efficiency. To avoid negative effect of electric field on soil and microbes and maximize microbial degradability, it is necessary to select a suitable electric field. In this study, artificial benzo [a]pyrene (BaP)-contaminated soil was selected as the object of remediation. Changes in soil factors and microorganisms were investigated under the voltage of 1.0, 2.0, and 2.5 V cm-1 using chemical analysis, real-time PCR, and high-throughput sequencing. The results revealed noticeable changes in soil factors (pH, moisture, electrical conductivity [EC], and BaP concentration) and microbes (PAHs ring-hydroxylating dioxygenase [PAHs-RHDα] gene and bacterial community) after the application of electric field. The degree of change was related to the electric field strength, with a suitable strength being more conducive to BaP removal. At 70 d, the highest mean extent of BaP removal and PAHs-RHDα gene copies were observed in EK2.0 + BIO, reaching 3.37 and 109.62 times those in BIO, respectively, indicating that the voltage of 2.0 V cm-1 was the most suitable for soil microbial growth and metabolism. Changes in soil factors caused by electric fields can affect microbial activity and community composition. Redundancy analysis revealed that soil pH and moisture had the most significant effects on microbial community composition (P < 0.05). The purpose of this study was to determine the appropriate electric field that could be used for electro-bioremediation of PAH-contaminated soil by evaluating the effects of electric fields on soil factors and microbial communities. This study also provides a reference for efficiency enhancement and successful application of electro-bioremediation of soil contaminated with PAHs.

An overview of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils

The global problem of petroleum contamination in soils seriously threatens environmental safety and human health. Current studies have successfully demonstrated the feasibility of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils due to their easy implementation, environmental benignity, and enhanced removal efficiency compared to bioremediation. This paper reviewed recent progress and development associated with bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils. The working principles, removal efficiencies, affecting factors, and constraints of the two technologies were thoroughly summarized and discussed. The potentials, challenges, and future perspectives were also deliberated to shed light on how to overcome the barriers and realize widespread implementation on large scales of these two technologies.

Treatment of PAHs contaminated soil in abandoned industrial site using combined method of improved in situ capping and electrokinetic enhanced-bioremediation

In situ capping and bioremediation are common technologies for treating contaminated soil at industrial sites. However, these two technologies have some shortcomings for treating soil heavily contaminated with organic matter, such as the limited adsorption in capping layer and the low biodegradation efficiency. This study proposed the method of an improved in situ capping combined with electrokinetic enhanced-bioremediation, and investigated its feasibility for treating heavily polycyclic aromatic hydrocarbons (PAHs) contaminated soil at an abandoned industrial site. By analyzing the changes in soil properties, PAHs concentration, and microbial community in experiments with voltages of 0, 0.8, 1.2, and 1.6 V cm^-1, it was found that improved in situ capping could effectively sequester PAHs migration by adsorption and biodegradation, and electric field could enhance PAHs removal from contaminated soil and bio-barrier. In the experiments with electric field, soil environment under the voltage of 1.2 V cm^-1 was more favorable for the growth and metabolism of microorganisms, and the residual PAHs concentrations (19.47 ± 0.76 mg kg^-1 and 619.38 ± 20.05 mg kg^-1) in the bio-barrier and contaminated soil of experiment with 1.2 V cm^-1 were the lowest, which indicated that optimization of the electric field conditions could lead to better effects.

Desorbing of decabromodiphenyl ether in low permeability soil and the remediation potential of enhanced electrokinetic

In this study, desorption kinetic was determined for decabromodiphenyl ether (BDE209) in a low permeability soil, and the remediation potential of hydroxypropyl-β-cyclodextrin (HPCD) enhanced electrokinetic (EK) technique was investigated. The results indicated that the release rate of BDE209 in slowly and very slowly desorbing process was accounted for 31% and 68% in the whole desorption process, respectively. The final desorption rate of BDE209 was 20.7% after 70 h treatment with 5% HPCD in an ideal solution reaction system (without electric field). However, the removal efficiency of BDE209 in section S5 (near anode) of EK1 and EK2 had reached 22% and 20% after 14 days treatment, respectively. Thus it can be assumed that the interaction between BDE209 (on soil particles) and HPCD had been promoted under the electric field. A higher cumulative EOF did not remove more BDE209 with HPCD as facilitating agent, which might due to the low viscosity of HPCD and it did not react completely with BDE209 in soils. In addition, the removal efficiency of BDE209 in section S5 of CK1 and CK2 (without HPCD) had reached 6% and 10%, respectively, which might attribute to the desorption promoting effect of the uniform electric field on hydrophobic organic contaminants. In summary, it is feasible to use the EK to remove BDE209 in low permeability soils using HPCD as solubilizing agent, and the technique key is maintaining sufficient EOF and ensuring the contact reaction efficiency between HPCD and BDE209 synchronously.

Process-based modeling of electrokinetic-enhanced bioremediation of chlorinated ethenes

This study presents a process-based modeling analysis of electrokinetic-enhanced bioremediation (EK-Bio) to illuminate the complex interactions between physical, electrostatic and biogeochemical processes occurring during the application of this remediation technique. The features of the proposed model include: (i) multidimensional electrokinetic transport in saturated porous media by electromigration and electroosmosis, (ii) charge interactions, (iii) degradation kinetics, (iv) microbial populations dynamics of indigenous and specialized exogenous degraders, (v) mass transfer limitations, and (vi) geochemical reactions. A scenario modeling investigation is presented, which was inspired by an EK-Bio pilot application conducted in a clayey aquitard at the Skuldelev site (Denmark) contaminated by chlorinated ethenes. Lactate and specialized degraders are delivered under conservative and reactive transport conditions. In the considered setup, transport of lactate using electrokinetics results in more than fourfold increase in the distribution efficiency with respect to a diffusion-only scenario. Moreover, EK transport by electromigration and electroosmosis yields fluxes at least two orders of magnitude larger than diffusive fluxes. Quantitative metrics are also defined and used to assess the amendment distribution and the enhanced contaminant biodegradation in the different conservative and reactive transport scenarios.

In situ groundwater remediation with bioelectrochemical systems: A critical review and future perspectives

Groundwater contamination is an ever-growing environmental issue that has attracted much and undiminished attention for the past half century. Groundwater contamination may originate from both anthropogenic (e.g., hydrocarbons) and natural compounds (e.g., nitrate and arsenic); to tackle the removal of these contaminants, different technologies have been developed and implemented. Recently, bioelectrochemical systems (BES) have emerged as a potential treatment for groundwater contamination, with reported in situ applications that showed promising results. Nitrate and hydrocarbons (toluene, phenanthrene, benzene, BTEX and light PAHs) have been successfully removed, due to the interaction of microbial metabolism with poised electrodes, in addition to physical migration due to the electric field generated in a BES. The selection of proper BESs relies on several factors and problems, such as the complexity of groundwater and subsoil environment, scale-up issues, and energy requirements that need to be accounted for. Modeling efforts could help predict case scenarios and select a proper design and approach, while BES-based biosensing could help monitoring remediation processes. In this review, we critically analyze in situ BES applications for groundwater remediation, focusing in particular on different proposed setups, and we identify and discuss the existing research gaps in the field.

Pilot-scale electro-bioremediation of heavily PAH-contaminated soil from an abandoned coking plant site

This study presents a systematic pilot-scale study on removal of PAHs from the abandoned site of Shenyang former Coking Plant in China (total PAH concentration of 5635.60 mg kg^-1 in soil). Three treatments, including the control treatment (without inoculation and electric field), bioremediation (with inoculation), and the electro-bioremediation (with inoculation and electric field), were conducted with a treatment time of 182 days to assess their PAH-removal efficiency. All the treatments were conducted from May to October under natural conditions. Results show that electro-bioremediation enhanced the removal of total PAHs, especially high-ring (>3 rings) PAHs. At 182 days, the degradation extents of total and 4-6-ring PAHs reached 69.1% and 65.9%, respectively, under electro-bioremediation (29.3% and 44.4% higher, respectively, than those under bioremediation alone). After electro-bioremediation, the total toxicity equivalent concentrations of total PAHs and 4-, 5- and 6-ring PAHs reduced 49.0%, 63.7%, 48.2% and 30.1%, respectively. These results indicate that electro-bioremediation not only effectively removed the PAHs but also reduced the health risks of soil in an abandoned coking plant site. In addition, electro-bioremediation with polarity reversal could maintain uniform soil pH, the degradation extent of PAHs and soil microorganism numbers at all sites. The environmental conditions, such as temperature and rainfall, had little influence on the process of electro-bioremediation. These findings suggest that electro-bioremediation may be applied for field-scale remediation of heavily PAH-contaminated soil in abandoned coking plant sites.

A review of electrokinetically enhanced bioremediation technologies for PHs

Since the early 1980's there have been several different strategies designed and applied to the remediation of subsurface environment including physical, chemical and biological approaches. They have had varying degrees of success in remediating contaminants from subsurface soils and groundwater. The objective of this review is to examine the range of technologies for the remediation of contaminants, particularly petroleum hydrocarbons, in subsurfaces with a specific focus on bioremediation and electrokinetic remediation. Further, this review examines the efficiency of remediation carried out by combining bioremediation and electrokinetic remediation. Surfactants, which are slowly becoming the selected chemicals for mobilizing contaminants, are also considered in this review. The current knowledge gaps of these technologies and techniques identified which could lead to development of more efficient ways of utilizing these technologies or development of a completely new technology.

Simulation tests of in situ groundwater denitrification with aquifer-buried biocathodes

Bioelectrochemical systems (BES) application was proposed for a variety of specific uses, due to these systems’ characteristics: electrodes can act as virtually inexhaustible electron acceptors/donors, offering a growth-support surface for microorganisms, and stimulating naturally-occurring microbial degradation activities. In situ, groundwater denitrification therefore seems to be a potential candidate for their use. In this study, buried biocathodes were operated in laboratory settings for the simulation of in situ groundwater denitrification. Two alternative configurations were tested: biocathode buried in sand, and biocathode buried in gravel. A control test with a biocathode in absence of sand/gravel was also performed. In all the cases, biocathodes were driven by power supply or potentiostat to guarantee a steady electron flux to the cathode. The presence of sand and gravel strongly influenced the denitrification process: in both configurations, accumulation of intermediate N-forms was detected, suggesting that the denitrification process was only partially achieved. In addition, a significant decrease (in the 20–36% range) in nitrate removal rates was measured in sand and gravel setups compared to the control reactor; this issue could be attributed to lack of recirculation that limited contact between substrate and electrode-adherent biofilm. Biocathodes buried in gravel obtained better results than those buried in sand due to the lower packing of the medium. The results of this study suggest that, in order to achieve successful in situ treatment, special design of submerged-biocathodic BESs is necessary.

An overview of electrokinetic soil flushing and its effect on bioremediation of hydrocarbon contaminated soil

Combination of electrokinetic soil flushing and bioremediation (EKSF-Bio) technology has attracted many researchers attention in the last few decades. Electrokinetic is used to increase biodegradation rate of microorganisms in soil pores. Therefore, it is necessary to use solubilizing agents such as surfactants that can improve biodegradation process. This paper describes the basic understanding and recent development associated with electrokinetic soil flushing, bioremediation, and its combination as innovative hybrid solution for treating hydrocarbon contaminated soil. Surfactant has been widely used in many studies and practical applications in remediation of hydrocarbon contaminant, but specific review about those combination technology cannot be found. Surfactants and other flushing/solubilizing agents have significant effects to increase hydrocarbon remediation efficiency. Thus, this paper is expected to provide clear information about fundamental interaction between electrokinetic, flushing agents and bioremediation, principal factors, and an inspiration for ongoing and future research benefit.

Distribution of ion contents and microorganisms during the electro-bioremediation of petroleum-contaminated saline soil

This study investigated the distribution of ion contents and microorganisms during the electro-bioremediation (EK-Bio) of petroleum-contaminated saline soil. The results showed that soil ions tend to accumulate around the electrodes, and the concentration was correlated with the distance from the electrodes. The average soil ion content was 7.92 g/kg around the electrodes (site A) and 0.55 g/kg at the furthest distance from the electrodes (site B) after 112 days of treatment, while the initial average content was 3.92 g/kg. Smooth linear (R² = 0.98) loss of soil ions was observed at site C, which was closer to the electrodes than site B, and had a final average soil ion content of 1.96 g/kg. The dehydrogenase activity was much higher in EK-Bio test soil than in the Bio test soil after 28 days of treatment, and followed the order: site C > site B > site A. However, the soil dehydrogenase activity dropped continuously when the soil ion reached very high and low concentrations at sites A and B. The soil microbial community varied in sample sites that had different ion contents, and the soil microbial diversity followed the order: site C > site B > site A. The applied electric field clearly enhanced the biodegradation efficiency for soil petroleum contaminants. However, the biodegradation promotion effects were weakening in soils where the ion contents were extremely high and low (sites A and B). These results can provide useful information for EK-Bioremediation of organic-contaminated saline soil.

Coupling electrokinetics with microbial biodegradation enhances the removal of cycloparaffinic hydrocarbons in soils

An innovative approach that couples electrokinetics with microbial degradation to breakdown cycloparaffinic hydrocarbons in soils is described. Soils were spiked with cyclododecane, used as a model pollutant, at approximately 1000mgkg^-1. A mixture of petroleum-utilizing bacteria was added to achieve about 10⁶-10⁷ CFUg^-1. Then, three treatments were applied for 25 days: (1) no electric field, control; (2) a constant voltage gradient of 1.3Vcm^-1 in one direction; and (3) the same electric field, but with periodical switching of polarity. The degradation pathway of cyclododecane was not changed by the electric field, but the dynamic processes were remarkably enhanced, especially when the electric field was periodically switched. After 25 days, 79.9% and 87.0% of the cyclododecane was degraded in tests 2 and 3, respectively; both much higher than the 61.5% degraded in test 1. Analysis of the intermediate products strongly indicated that the competitive advantage of the electric field was the increase in ring-breaking of cyclododecane, resulting in greater concentrations of linear substances that were more susceptible to microbial attack, that is, β-oxidation. The conditions near the cathode were more favorable for the growth and metabolism of microorganisms, which also enhanced β-oxidation of the linear alkanoic acids. Therefore, when the electric field polarity was periodically switched, the functions of both the anode and cathode electrodes were applied across the whole soil cell, further increasing the degradation efficiency.

A review of combinations of electrokinetic applications

Anthropogenic activities contaminate many lands and underground waters with dangerous materials. Although polluted soils occupy small parts of the land, the risk they pose to plants, animals, humans, and groundwater is too high. Remediation technologies have been used for many years in order to mitigate pollution or remove pollutants from soils. However, there are some deficiencies in the remediation in complex site conditions such as low permeability and complex composition of some clays or heterogeneous subsurface conditions. Electrokinetic is an effective method in which electrodes are embedded in polluted soil, usually vertically but in some cases horizontally, and a low direct current voltage gradient is applied between the electrodes. The electric gradient initiates movement of contaminants by electromigration (charged chemical movement), electro-osmosis (movement of fluid), electrolysis (chemical reactions due to the electric field), and diffusion. However, sites that are contaminated with heavy metals or mixed contaminants (e.g. a combination of organic compounds with heavy metals and/or radionuclides) are difficult to remediate. There is no technology that can achieve the best results, but combining electrokinetic with other remediation methods, such as bioremediation and geosynthetics, promises to be the most effective method so far. This review focuses on the factors that affect electrokinetic remediation and the state-of-the-art methods that can be combined with electrokinetic.

Review of chemical and electrokinetic remediation of PCBs contaminated soils and sediments

Polychlorinated biphenyls (PCBs) are manmade organic compounds, and pollution due to PCBs has been a global environmental problem because of their persistence, long-range atmospheric transport and bioaccumulation. Many physical, chemical and biological technologies have been utilized to remediate PCBs contaminated soils and sediments, and there are some emerging new technologies and combined methods that may provide cost-effective alternatives to the existing remediation practice. This review provides a general overview on the recent developments in chemical treatment and electrokinetic remediation (EK) technologies related to PCBs remediation. In particular, four technologies including photocatalytic degradation of PCBs combined with soil washing, Fe-based reductive dechlorination, advanced oxidation process, and EK/integrated EK technology (e.g., EK coupled with chemical oxidation, nanotechnology and bioremediation) are reviewed in detail. We focus on the fundamental principles and governing factors of chemical technologies, and EK/integrated EK technologies. Comparative analysis of these technologies including their major advantages and disadvantages is summarized. The existing problems and future prospects of these technologies regarding PCBs remediation are further highlighted.

Effect of electric field on the performance of soil electro-bioremediation with a periodic polarity reversal strategy

In this work, it is studied the effect of the electric fields (within the range 0.0-1.5 V cm(-1)) on the performance of electrobioremediation with polarity reversal, using a bench scale plant with diesel-spiked kaolinite with 14-d long tests. Results obtained show that the periodic changes in the polarity of the electric field results in a more efficient treatment as compared with the single electro-bioremediation process, and it does not require the addition of a buffer to keep the pH within a suitable range. The soil heating was not very important and it did not cause a change in the temperature of the soil up to values incompatible with the life of microorganisms. Low values of water transported by the electro-osmosis process were attained with this strategy. After only 14 d of treatment, by using the highest electric field studied in this work (1.5 V cm(-1)), up to 35.40% of the diesel added at the beginning of the test was removed, value much higher than the 10.5% obtained by the single bioremediation technology in the same period.

Combination of bioremediation and electrokinetics for the in-situ treatment of diesel polluted soil: A comparison of strategies

The aim of this work is to compare different strategies based on electrokinetic soil flushing and bioremediation for the remediation of diesel-polluted soil. Four options were tested at the laboratory scale: single bioremediation (Bio), performed as a control test; a direct combination of electrokinetic soil flushing and biological technologies (EKSF-Bio); EKSF-Bio with daily polarity reversal of the electric field (PR-EKSF-Bio); and a combination of electrokinetic soil flushing and a permeable reactive biological barrier (EKSF-BioPRB). Four batch experiments of 14 days duration were carried out for comparing technologies at room temperature with an electric field of 1.0 V cm(-1) (in EKSF). A diesel degrading microbial consortium was used. The experimental procedure and some specific details, such as the flushing fluids used, varied depending on the strategy. When using the EKSF-Bio option, a high buffer concentration was required to control the pH, causing soil heating, which negatively affected the biological growth and thus the diesel removal. The PR-EKSF-Bio and the EKSF-BioPRB options attained suitable operating conditions and improved the transport processes for biological growth. Polarity reversal was an efficient option for pH, moisture and temperature control. Homogeneous microbial growth was observed, and approximately 20% of the diesel was removed. The BioPRB option was not as efficient as PR-EKSF-Bio in controlling the operating conditions, but the central biobarrier protected the biological activity. Microbial growth was observed not only in the biobarrier but also in a large portion of the soil, and 29% of the diesel was removed in the short remediation test.

Electro-assisted groundwater bioremediation: fundamentals, challenges and future perspectives

Bioremediation is envisaged as an important way to abate groundwater contamination, but the need for chemical addition and limited bioavailability of electron donors/acceptors or contaminants hamper its application. As a promising means to enhance such processes, electrochemical system has drawn considerable attention, as it offers distinct advantages in terms of environmental benignity, controllability and treatment efficiency. Meanwhile, there are also potential risks and considerable engineering challenges for its practical application. This review provides a first comprehensive introduction of this emerging technology, discusses its potential applications and current challenges, identifies the knowledge gaps, and outlooks the future opportunities to bring it to field application. The need for a better understanding on the microbiology under electrochemical stimulation and the future requirements on process monitoring, modeling and evaluation protocols and field investigations are highlighted.

ELECTROBIORREMEDIACIÓN DE UN SUELO CON UNA CONTAMINACIÓN ANTIGUA DE HIDROCARBURO

<p>La electrobiorremediación es la técnica híbrida que suma los efectos de la electrorremediación a la degradación bacteriana de diferentes contaminantes. El objetivo de este estudio fue utilizar esta técnica para aumentar la biodisponibilidad de los hidrocarburos presentes en un suelo con contaminación antigua y su eliminación. El experimento duró 63 días y se realizó en una cuba de vidrio con tres compartimentos comunicados por puentes salinos de buffer fosfato que permitieron establecer la diferencia de voltaje y mantener el pH del suelo en valores óptimos para la vida bacteriana. Se determinaron: pH,  humedad, hidrocarburos totales del petróleo (TPH) y bacterias. Los resultados mostraron una disminución de los hidrocarburos siendo la región del cátodo la que mejor eliminó los hidrocarburos, con solo el 9,4<ins cite="mailto:ABC" datetime="2014-12-16T08:04"> </ins>% y 5,46<ins cite="mailto:ABC" datetime="2014-12-16T08:04"> </ins>% de los hidrocarburos alcanos y poliaromáticos; en la celda control estos valores fueron del 15,28 y 14,4<ins cite="mailto:ABC" datetime="2014-12-16T08:05"> </ins><del cite="mailto:ABC" datetime="2014-12-16T08:05"></del>% respectivamente, mientras que el centro fue el lugar que menor degradación presentó quedando el 19,49<ins cite="mailto:ABC" datetime="2014-12-16T08:05"> </ins>% y el 17<ins cite="mailto:ABC" datetime="2014-12-16T08:05">,</ins><del cite="mailto:ABC" datetime="2014-12-16T08:05"></del>88<ins cite="mailto:ABC" datetime="2014-12-16T08:05"> </ins>% de los hidrocarburos alcanos y PAH. Concluimos que los resultados de laboratorio indican la posibilidad de incrementar la biodegradación en suelos con tratamientos biológicos previos.</p><p><strong>ABSTRACT</strong></p><p>Electrobioremediation (EKB) is a hybrid technique that combines bioremediation with electrokinetics. EKB uses bioremediation to degrade hydrocarbon contaminants and EK to mobilize them. The aim of this study was to use a technique for increasing the bioavailability of the hydrocarbons in soil pollution. The 63-day experiment was conducted in a three compartment glass vial connected by three salt bridges of phosphate buffer that established a voltage difference and maintained soil pH optimum for bacterial life value. pH, moisture, total petroleum hydrocarbons (TPH) and bacteria were determined. The results showed a decrease in hydrocarbon, the best results were close to the cathode,  where  only 9.4<ins cite="mailto:ABC" datetime="2014-12-16T08:05"> </ins>% and 5.46<ins cite="mailto:ABC" datetime="2014-12-16T08:05"> </ins>% of alkanes and polyaromatic hydrocarbons were left. In the control cell these values were 15.28 and 14.4<ins cite="mailto:ABC" datetime="2014-12-16T08:05"> </ins>% respectively, while the center generated less degradation with 19.49<ins cite="mailto:ABC" datetime="2014-12-16T08:06"> </ins>% and 17.88<ins cite="mailto:ABC" datetime="2014-12-16T08:06"> %</ins><del cite="mailto:ABC" datetime="2014-12-16T08:06"></del>of alkanes and PAH hydrocarbons left. We conclude that the results from the laboratory study indicated that this technique gives the possibility of increasing biodegradation in soils with previous biological treatments.</p>

Feasibility of electrokinetic oxygen supply for soil bioremediation purposes

This paper studies the possibility of providing oxygen to a soil by an electrokinetic technique, so that the method could be used in future aerobic polluted soil bioremediation treatments. The oxygen was generated from the anodic reaction of water electrolysis and transported to the soil in a laboratory-scale electrokinetic cell. Two variables were tested: the soil texture and the voltage gradient. The technique was tested in two artificial soils (clay and sand) and later in a real silty soil, and three voltage gradients were used: 0.0 (control), 0.5, and 1.0 V cm(-1). It was observed that these two variables strongly influenced the results. Oxygen transport into the soil was only available in the silty and sandy soils by oxygen diffusion, obtaining high dissolved oxygen concentrations, between 4 and 9 mg L(-1), useful for possible aerobic biodegradation processes, while transport was not possible in fine-grained soils such as clay. Electro-osmotic flow did not contribute to the transport of oxygen, and an increase in voltage gradients produced higher oxygen transfer rates. However, only a minimum fraction of the electrolytically generated oxygen was efficiently used, and the maximum oxygen transport rate observed, approximately 1.4 mgO2 L(-1)d(-1), was rather low, so this technique could be only tested in slow in-situ biostimulation processes for organics removal from polluted soils.

Biological permeable reactive barriers coupled with electrokinetic soil flushing for the treatment of diesel-polluted clay soil

Removal of diesel from spiked kaolin has been studied in the laboratory using coupled electrokinetic soil flushing (EKSF) and bioremediation through an innovative biological permeable reactive barriers (Bio-PRBs) positioned between electrode wells. The results show that this technology is efficient in the removal of pollutants and allows the soil to maintain the appropriate conditions for microorganism growth in terms of pH, temperature, and nutrients. At the same time, EKSF was demonstrated to be a very interesting technology for transporting pollutants, microorganisms and nutrients, although results indicate that careful management is necessary to avoid the depletion of nutrients, which are effectively transported by electro-migration. After two weeks of operation, 30% of pollutants are removed and energy consumption is under 70 kWh m(-3). Main fluxes (electroosmosis and evaporation) and changes in the most relevant parameters (nutrients, diesel, microorganisms, surfactants, moisture conductivity and pH) during treatment and in a complete post-study analysis are studied to give a comprehensive description of the most relevant processes occurring in the soil (pollutant transport and biodegradation).

Effect of electrokinetics on biodesulfurization of the model oil by Rhodococcus erythropolis PTCC1767 and Bacillus subtilis DSMZ 3256

Biodesulfurization of the model oil using Rhodococcus erythropolis PTCC1767 (R. erythropolis) and Bacillus subtilis DSMZ 3256 (B. subtilis) strains assisted by applying electrokinetic was investigated as a novel method for desulfurization. The yield of biodesulfurization is low because it takes long time to be completed. Electrokinetic reduces the process time and accelerates degradation of the sulfur compounds. A mixture of normal hexadecane with 10mM dibenzotiophene (DBT) was employed as the model oil. The biodesulfurization experiments were initially performed. The results represented 34% and 62% DBT conversions after 1 and 6 days by R. erythropolis and the biodesulfurization yields were 11% and 36%, respectively. However, the DBT conversions for B. subtilis strain after 1 and 6 days were 31% and 55% and the biodesulfurization yields were 9% and 31%, respectively. The electrokinetic biodesulfurization experiments were studied at different current densities and the optimum current density was selected. According to the results, DBT conversion and biodesulfurization yield for R. erythropolis after 3 days were 76% and 39%, respectively, at the current density of 7.5 mA/cm(2). At the same conditions, the DBT conversion and biodesulfurization yield for B. subtilis were 71% and 37%, respectively. The experimental results indicate that the electrokinetic significantly reduces the biodesulfurization time. The combination of electrokinetic and biodesulfurization has the potential to obtain 'zero sulfur' products.

Electrokinetic-enhanced bioremediation of organic contaminants: a review of processes and environmental applications

There is current interest in finding sustainable remediation technologies for the removal of contaminants from soil and groundwater. This review focuses on the combination of electrokinetics, the use of an electric potential to move organic and inorganic compounds, or charged particles/organisms in the subsurface independent of hydraulic conductivity; and bioremediation, the destruction of organic contaminants or attenuation of inorganic compounds by the activity of microorganisms in situ or ex situ. The objective of the review is to examine the state of knowledge on electrokinetic bioremediation and critically evaluate factors which affect the up-scaling of laboratory and bench-scale research to field-scale application. It discusses the mechanisms of electrokinetic bioremediation in the subsurface environment at different micro and macroscales, the influence of environmental processes on electrokinetic phenomena and the design options available for application to the field scale. The review also presents results from a modelling exercise to illustrate the effectiveness of electrokinetics on the supply electron acceptors to a plume scale scenario where these are limiting. Current research needs include analysis of electrokinetic bioremediation in more representative environmental settings, such as those in physically heterogeneous systems in order to gain a greater understanding of the controlling mechanisms on both electrokinetics and bioremediation in those scenarios.

Electrokinetic remediation of organochlorines in soil: enhancement techniques and integration with other remediation technologies

Electrokinetic remediation has been increasingly used in soils and other matrices for numerous contaminants such as inorganic, organic, radionuclides, explosives and their mixtures. Several strategies were tested to improve this technology effectiveness, namely techniques to solubilize contaminants, control soil pH and also couple electrokinetics with other remediation technologies. This review focus in the experimental work carried out in organochlorines soil electroremediation, aiming to systemize useful information to researchers in this field. It is not possible to clearly state what technique is the best, since experimental approaches and targeted contaminants are different. Further research is needed in the application of some of the reviewed techniques. Also a number of technical and environmental issues will require evaluation for full-scale application. Removal efficiencies reported in real contaminated soils are much lower than the ones obtained with spiked kaolinite, showing the influence of other factors like aging of the contamination and adsorption to soil particles, resulting in important challenges when transferring technologies into the field.

A review on techniques to enhance electrochemical remediation of contaminated soils

Electrochemical remediation is a promising remediation technology for soils contaminated with inorganic, organic, and mixed contaminants. A direct-current electric field is imposed on the contaminated soil to extract the contaminants by the combined mechanisms of electroosmosis, electromigration, and/or electrophoresis. The technology is particularly effective in fine-grained soils of low hydraulic conductivity and large specific surface area. However, the effectiveness of the technology may be diminished by sorption of contaminants on soil particle surfaces and various effects induced by the hydrogen ions and hydroxide ions generated at the electrodes. Various enhancement techniques have been developed to tackle these diminishing effects. A comprehensive review of these techniques is given in this paper with a view to providing useful information to researchers and practitioners in this field.