Self-assembled mesoporous γ-Al2O3 spherical nanoparticles and their efficiency for the removal of arsenic from water

A review on arsenic pollution, toxicity, health risks, and management strategies using nanoremediation approaches

OBJECTIVES

Over 50 countries are affected by arsenic contamination. The problem is becoming worse as the number of affected people increases and new sites are reported globally.

CONTENT

Various human activities have increased arsenic pollution, notably in both terrestrial and aquatic environments. Contamination of our water and soil by arsenic poses a threat to our environment and natural resources. Arsenic poisoning harms several physiological systems and may cause cancer and death. Excessive exposure may cause toxic build-up in human and animal tissues. Arsenic-exposed people had different skin lesion shapes and were vulnerable to extra arsenic-induced illness risks. So far, research shows that varying susceptibility plays a role in arsenic-induced diseases. Several studies have revealed that arsenic is a toxin that reduces metabolic activities. Diverse remediation approaches are being developed to control arsenic in surrounding environments.

SUMMARY AND OUTLOOK

A sustainable clean-up technique (nanoremediation) is required to restore natural equilibrium. More research is therefore required to better understand the biogeochemical processes involved in removing arsenic from soils and waters.

Arsenite oxidation and adsorptive arsenic removal from contaminated water: a review

Arsenic poisoning of groundwater is one of the most critical environmental hazards on Earth. Therefore, the practical and proper treatment of arsenic in water requires more attention to ensure safe drinking water. The World Health Organization (WHO) sets guidelines for 10 μg/L of arsenic in drinking water, and direct long-term exposure to arsenic in drinking water beyond this value causes severe health hazards to individuals. Numerous studies have confirmed the adverse effects of arsenic after long-term consumption of arsenic-contaminated water. Here, technologies for the remediation of arsenic from water are highlighted for the purpose of understanding the need for a single-point solution for the treatment of As(III)-contaminated water. As(III) species are neutral at neutral pH; the solution requires transformation technology for its complete removal. In this critical review, emphasis was placed on single-step technologies with multiple functions to remediate arsenic from water.

Predicting the removal efficiency of pharmaceutical and personal care products using heated metal oxides as adsorbents based on their physicochemical characteristics

Pharmaceutical and personal care products (PPCPs) are emerging pollutants that are commonly found in the environment and exist predominantly in nondegradable forms. Several attempts have been made to remove PPCPs via conventional wastewater treatment processes; however, these processes have limitations, such as high costs and insufficient removal efficiencies. Adsorption is a promising alternative for removing PPCPs because it is inexpensive, highly reusable, and easy to operate. Therefore, this study aims to determine the contributing characteristics that can be used to predict the adsorption behaviour of PPCPs based on their physicochemical properties, with heated metal oxide adsorbents (HMOAs). HAOP (heated aluminium oxide particles) and HIOP (heated iron oxide particles) with particle sizes below 38 μm were used. Results from the Brunauer-Emmett-Teller (BET) analysis show that HIOP has higher surface area and smaller pore size (113.7 ± 26.3 m2/g and 5.4 ± 1.8 nm) than HAOP (14.5 ± 0.6 m2/g and 18.6 ± 3.1 nm), which suggest that HIOP would show superior adsorption rates compared to HAOP. The adsorption mechanism is identified based on three major physicochemical properties of PPCPs: molecular weight (M.W.), octanol-water partition coefficient (log Kow), and acid dissociation constant (pKa). The results suggest that the most dominant factor that contributes to the adsorption of PPCPs on to HMOAs is the M.W., where the larger the molecular size, the better the adsorption efficiency. The tests conducted with varying log Kow values revealed that the hydrophilicity of the adsorbent influences the adsorption performance. It was found that HIOP exhibits better removal efficiencies with hydrophilic PPCPs (up to 83%) than with hydrophobic PPCPs (48%), while HAOP exhibits better removal efficiencies with hydrophobic PPCPs (86%) than with hydrophilic PPCPs, with less than 10% removal. Unlike the M.W. and pKa values, the log Kow does not exhibit any visible trend. Therefore, the adsorption behaviour can be predicted with the M.W. and pKa values of the PPCPs, when HAOP and HIOP are used as adsorbents.

Hybrid PET Track-Etched Membranes Grafted by Well-Defined Poly(2-(dimethylamino)ethyl methacrylate) Brushes and Loaded with Silver Nanoparticles for the Removal of As(III)

Nanoporous track-etched membranes (TeM) are promising materials as adsorbents to remove toxic pollutants, but control over the pore diameter and density in addition to precise functionalization of nanochannels is crucial for controlling the surface area and efficiency of TeMs. This study reported the synthesis of functionalized PET TeMs as high-capacity sorbents for the removal of trivalent arsenic, As(III), which is more mobile and about 60 times more toxic than As(V). Nanochannels of PET-TeMs were functionalized by UV-initiated reversible addition fragmentation chain transfer (RAFT)-mediated grafting of 2-(dimethyamino)ethyl methacrylate (DMAEMA), allowing precise control of the degree of grafting and graft lengths within the nanochannels. Ag NPs were then loaded onto PDMAEMA-g-PET to provide a hybrid sorbent for As(III) removal. The As(III) removal efficiency of Ag@PDMAEMA-g-PET, PDMAEMA-g-PET, and pristine PET TeM was compared by adsorption kinetics studies at various pH and sorption times. The adsorption of As(III) by Ag@DMAEMA-g-PET and DMAEMA-g-PET TeMs was found to follow the Freundlich mechanism and a pseudo-second-order kinetic model. After 10 h, As(III) removal efficiencies were 85.6% and 56% for Ag@PDMAEMA-g-PET and PDMAEMA-g-PET, respectively, while PET template had a very low arsenic sorption capacity of 17.5% at optimal pH of 4.0, indicating that both PDMAEMA grafting and Ag-NPs loading significantly increased the As(III) removal capacity of PET-TeMs.

Rapid purification of As(III) in water using iron-manganese composite oxide coupled with sulfite: Importance of the SO5•- radicals

Manganese (Mn)-containing composite metal adsorbents are very effective at removing arsenite (As(III)) from contaminated water, however, the low removal speed and oxidation efficiency have limited their further application. In this study, a nonhomogeneous catalytic oxidation-adsorption system was constructed by coupling iron-manganese composite oxide (FeMnO_x) with sulfite (S(IV)) to enhance the recovery of oxidative capacity and accelerate the removal of As(III). Experimental results showed that the FeMnO_x/S(IV) system decreased the As(III) concentration from 1079 to <10 µg/L within 10 min and almost completely oxidized As(III) to As(V). In contrast, FeMnO_x alone removed only 82.4% of As(III) within 30 min, and 60.0% of the adsorbed As(III) was not oxidized. Meanwhile, the adsorption capacity of FeMnO_x/S(IV) system for As(III) was considerably higher than that of the only-FeMnO_x system (76.5 > 46.3 mg/g). The efficient and fast As(III) removal was attributed to the SO₅^•- radical generated by S(IV) acting as the driving force for the redox cycle between As(III) and Mn(II/III/IV). Several environmental factors (e.g., solution pH and inorganic anions) and the reusability and practicality of FeMnO_x were systematically investigated, and the results further confirmed the superiority of the FeMnO_x/S(IV) system in As(III) removal. In particular, the proposed FeMnO_x nanocellulose aerogel effectively purified arsenic-contaminated groundwater using a fixed-bed column. Thus, FeMnO_x-S(IV) coupling is very promising for the purification of arsenic-contaminated water bodies.

Ordered Mesoporous Alumina with Tunable Morphologies and Pore Sizes for CO2 Capture and Dye Separation

We describe a versatile and scalable strategy toward long-range and periodically ordered mesoporous alumina (Al₂O₃) structures by evaporation-induced self-assembly of a structure-directing ABA triblock copolymer (F127) mixed with aluminum tri-sec-butoxide-derived sol additive. We found that the separate preparation of the alkoxide sol-gel reaction before mixing with the block copolymer enabled access to a relatively unexplored parameter space of copolymer-to-additive composition, acid-to-metal molar ratio, and solvent, yielding ordered mesophases of two-dimensional (2D) lamellar, hexagonal cylinder, and 3D cage-like cubic lattices, as well as multiscale hierarchical ordered structures from spinodal decomposition-induced macro- and mesophase separation. Thermal annealing in air at 900 °C yielded well-ordered mesoporous crystalline γ-Al₂O₃ structures and hierarchically porous γ-Al₂O₃ with 3D interconnected macroscale and ordered mesoscale pore networks. The ordered Al₂O₃ structures exhibited tunable pore sizes in three different length scales, <2 nm (micropore), 2-11 nm (mesopore), and 1-5 μm (macropore), as well as high surface areas and pore volumes of up to 305 m²/g and 0.33 cm³/g, respectively. Moreover, the resultant mesoporous Al₂O₃ demonstrated enhanced adsorption capacities of carbon dioxide and Congo red dye. Such hierarchically ordered mesoporous Al₂O₃ are well-suited for green environmental solutions and urban sustainability applications, for example, high-temperature solid adsorbents and catalyst supports for carbon dioxide sequestration, fuel cells, and wastewater separation treatments.

Evaluation of Fe-Mg Binary Oxide for As (III) Adsorption-Synthesis, Characterization and Kinetic Modelling

Nanotechnology has received much attention in treating contaminated waters. In the present study, a facile co-precipitation method was employed to synthesize a novel iron and magnesium based binary metal oxide using a stoichiometrically fixed amount of FeNO₃·9H₂O and MgNO₃·6H₂O in a proportion of molar concentration 1:1 and was later evaluated in removing As (III) from contaminated waters. Characterization of the prepared nanomaterial was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDAX) and ultraviolet–visible spectrophotometry (UV-VIS). Experimental studies on batch scale were carried out, examining the effect of varying initial concentrations of metal, adsorbent dosage, application time and initial pH on removal efficiency. Arsenic removal increased on increasing adsorbent dosage (0.1–1 g/L) but trend reversed on increasing initial arsenic concentration attaining q_max of 263.20 mg/g. Adsorption was quite efficient in pH range 4–8. Freundlich fitted better for adsorption isotherm along with following Pseudo-2nd order kinetics. The reusability and effect of co-existing ions on arsenic adsorption, namely SO₄²⁻, CO₃²⁻ and PO₄³⁻ were also explored with reusability in 1st and 2nd cycles attained adsorptive removal up to 77% and 64% respectively. The prepared nano-adsorbent showed promising results in terms of high arsenic uptake (q_max of 263.20 mg/g) along with facile and cost-effective synthesis. Thus, the co-precipitation technique used in this work is a simple one step procedure without any use of any precursor as compared to most of the other procedures used for synthesis.

Advanced application of nano-technological and biological processes as well as mitigation options for arsenic removal

Arsenic (As) removal is a huge challenge, since several million people are potentially exposed (>10 μg/L World Health Organization guideline limit) through As contaminated drinking water worldwide. Review attempts to address the present situation of As removal, considering key topics on nano-technological and biological process and current progress and future perspectives of possible mitigation options have been evaluated. Different physical, chemical and biological methods are available to remove As from contaminated water/soil/wastes, where removal efficiency mainly depends on absorbent type, initial adsorbate concentration, speciation and interfering species. Oxidation is an important pretreatment step in As removal, which is generally achieved by several media such as O₂/O₃, HClO, KMnO₄ and H₂O₂. The Fe-based-nanomaterials (α/β/γ-FeOOH, Fe₂O₃/Fe₃O₄-γ-Fe₂O₃), Fe-based-composite-compounds, activated-Al₂O₃, HFO, Fe-Al₂O₃, Fe₂O₃-impregnated-graphene-aerogel, iron-doped-TiO₂, aerogel-based- CeTiO₂, and iron-oxide-coated-manganese are effective to remove As from contaminated water. Biological processes (phytoremediation/microbiological) are effective and ecofriendly for As removal from water and/or soil environment. Microorganisms remove As from water, sediments and soil by metabolism, detoxification, oxidation-reduction, bio-adsorption, bio-precipitation, and volatilization processes. Ecofriendly As mitigation options can be achieved by utilizing an alternative As-safe-aquifer, surface-water or rainwater-harvesting. Application of hybrid (biological with chemical and physical process) and Best-Available-Technologies (BAT) can be the most effective As removal strategy to remediate As contaminated environments.

Sorption behavior of 6:2 chlorinated polyfluorinated ether sulfonate (F-53B) on four kinds of nano-materials

6:2 chlorinated polyfluorinated ether sulfonate (with the trade name F-53B, a substitute for PFOS) is one type of Per- and polyfluoroalkyl substances (PFASs), which is widely used as a chromium mist inhibitor in China. It has been found in environment commonly. In this study, the sorption behavior of F-53B on four kinds of nano-materials: alumina nanopowder (ANP), alumina nanowires (ANW), hydrophilic bentonite nanoclay (HBNC) and surface modified nanoclay (SMNC) were investigated. The kinetics results indicated that the sorption of F-53B on four nano-materials reached equilibrium within 2 h and the sorption process were fitted better by the pseudo-second-order kinetic model than the pseudo-first-order kinetic model. The thermodynamic study showed that the sorption of F-53B on nano-materials were exothermic and spontaneous. As the increase of temperature, the maximum sorption capacity of ANP, ANW, HBNC, SMNC increased, and reached 868.75, 91.35, 5.15, 2465.09 μg/g at 25 °C, respectively. The surface modified nanoclay (SMNC) was better than the others for removing F-53B from aquatic environment. To investigate the effects of pH and ion strength, the particle size and zeta potential of sorbents at different pH and ion strength were measured by Dynamic Light Scattering (DLS), and concluded that the sorption mechanism of F-53B on two kinds of nanoalumina mainly included electrostatic attraction and agglomeration effects, while hydrophobic interaction played an important role on the sorption of F-53B on nanoclay. This study revealed the sorption behavior and mechanism of F-53B on four kinds of nano-materials, and the results provided theoretical support for removing F-53B from electroplating wastewater with nano-materials.

Arsenic adsorbent derived from the ferromanganese slag

Arsenic-contaminated groundwater has a severe negative impact on the health of living beings. Groundwater majorly contains arsenite (As(III)) as well as arsenate (As(V)). Among these two, the arsenite species are more carcinogenic, mobile, and lethal. Hence, it is more difficult to remove by conventional water treatment methods. Ferromanganese slag, waste generated from steel industries, has been utilized in this study for the development of arsenic adsorbent. A chemical treatment method is applied to the ferromanganese slag to prepare efficient arsenic adsorbent, and it is easy to scale up. An adsorbent with the capacity for simultaneous oxidation of As(III) and adsorption of total arsenic species can be efficient for arsenic decontamination. X-ray photoelectron spectroscopy and X-ray absorption near edge spectra techniques prove the As(III) oxidation capability of the developed material is about 70 ± 5% based on initial As(III) concentration. The adsorbent not only oxidizes the As(III) species but also adsorbs both the arsenic species. The Langmuir isotherm model estimates the maximum adsorption capacities at the equilibrium concentration of 10 μg/L are 1.010 ± 0.004 mg/g and 1.614 ± 0.006 mg/g for As(III) and As(V), respectively. The rate of adsorption of As(III) was higher compared to the As(V), which was confirmed by the pseudo-second-order kinetic model. Therefore, the treated water quality meets the World Health Organization and Indian drinking water standards.

Understanding of NOx storage property of impregnated Ba species after crystallization of mesoporous alumina powders

The regulation of automobile exhaust gas, especially that concerning hazardous nitrogen oxide (called as NOx) becomes stricter year-by-year, which should be urgently corresponded for cleaning the NOx containing emission. According to surface affinity of γ-alumina to metal catalysts and its thermal stability, crystalline γ-alumina has been frequently utilized as catalyst supports showing relatively high specific surface area. From the viewpoint, we consider that highly porous alumina powders prepared using amphiphilic organic molecules are potential as such a catalyst support for improving NOx removing property. In this study, we report surface property of the mesoporous alumina powders against NOx molecules after crystallizing to its γ-phase and NOx storage property after impregnation of barium (Ba) acetate in the mesopores. Adsorption of NO with O₂ on mesoporous γ-alumina powders without Ba species were more likely to be bridging bidentate than chelating bidentate nitrates (NO₃^-) with comparing to commercially available γ-alumina powders. After impregnating the Ba species, admitted NO molecules were oxidized with enough O₂ and stored very strongly as ionic nitrate (NO₃^-) onto the Ba species even after heating at 500 °C. This preliminary study is helpful for designing mesoporous deNOx catalysts combined with unique storage/adsorption property.

Polymer Nanocomposite-based Coatings for Corrosion Protection

Corrosion of metals induces enormous loss of material performance and increase of cost, which has been a common and intractable issue that needs to be addressed urgently. Coating technology has been acknowledged to be the most economic and efficient approach to retard the metal corrosion. For several decades, polymers have been recognized as an effective anticorrosion coating material in both industries and scientific communities, as they demonstrate good barrier properties, ease of altering properties and massive production. Nanomaterials show distinctively different physical and chemical properties compared with their bulk counterparts, which have been considered as highly promising functional materials in various applications, impacting virtually all the fields of science and technologies. Recently, the introduction of nanomaterials with various properties into polymer matrix to form a polymer nanocomposite has been devoted to improve anticorrosive ability of polymer coatings. In this review article, we highlight the recent advances and synopsis of these high-performance polymer nanocomposites as anticorrosive coating materials. We expect that this work could be helpful for the researchers who are interested in the development of functional nanomaterials and advanced corrosion protection technology.

Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

The shortage of water resources and increasingly serious water pollution have driven the development of high-efficiency water treatment technology. Among a variety of technologies, adsorption is widely used in environmental remediation. As a class of typical adsorbents, metal oxides have been developed for a long time and continued to attract widespread attention, since they have unique physicochemical properties, including abundant surface active sites, high chemical stability, and adjustable shape and size. In this review, the basic principles of the adsorption process will be first elucidated, including affecting factors, evaluation index, adsorption mechanisms, and common kinetic and isotherm models. Then, the adsorption properties of several typical metal oxides, and key parameters affecting the adsorption performance such as particle/pore size, morphology, functionalization and modification, supports and calcination temperature will be discussed, as well as their application in the removal of various inorganic and organic contaminants. In addition, desorption and recycling of the spent adsorbent are summarized. Finally, the future development of metal oxide based adsorbents is also discussed.

As(V) removal using biochar produced from an agricultural waste and prediction of removal efficiency using multiple regression analysis

Arsenic contamination in drinking water is a matter of concern for many countries. An efficient and low-cost solution for this hazard is essentially needed on urgent basis. Therefore, in this study, banana pith (an agricultural waste) was used for biochar production and later it was modified with iron and applied for arsenic adsorption from aqueous solution. Produced biochar was characterized for proximate, ultimate, and surface analyses. Interestingly, after iron impregnation, the surface area of biochar increased (31.59 m²/g) by nearly 8 times. Morphological analysis showed that iron particles firmly held within the pores after impregnation. Arsenate (As(V)) adsorption behavior of iron-impregnated banana pith biochar was evaluated through a batch study by considering various parameters like dose, concentration, pH, temperature, and competing anions. Compared to impregnated biochar, raw biomass and its biochar showed a lesser affinity for arsenate in aqueous solution. The adsorption isotherm of As(V) on banana pith biochar was covered in the temperature range of 298 to 318 K, and kinetic data of adsorption was experimentally generated at 298 K. Langmuir model for the sorption isotherms and pseudo-second-order kinetic model for the sorption kinetics represented the experimental data. The thermodynamic study showed negative Gibb's free energy (- 46.88 kJ/mol at 298 K, - 48.58 kJ/mol at 308 K, - 50.73 kJ/mol at 318 K) that suggested spontaneity of the adsorption process. Negative enthalpy (ΔH° = - 10.55 kJ/mol) showed exothermic nature of adsorption of arsenic, while negative entropy (ΔS° = 0.123 kJ/mol.K) suggested enthalpy-driven adsorption process. Mechanism of arsenic adsorption onto iron-impregnated banana pith biochar has also been discussed in detail. Based on the experimental observation, a predictive model for arsenate removal has been developed in this study. The findings of the present study elucidated that iron-impregnated banana pith biochar can be used as a low-cost adsorbing material for As(V) from aqueous solutions.

Citric Acid Tunes the Formation of Antimicrobial Melanin-Like Nanostructures

Nature has provided a valuable source of inspiration for developing high performance multifunctional materials. Particularly, catechol-containing amino acid l-3,4-dihydroxyphenylalanine (l-DOPA) has aroused the interest to design hybrid multifunctional materials with superior adhesive ability. DOPA oxidative polymerization mediated by either melanogenic enzymes or an alkaline environment involving catechol intermolecular cross-linking, ultimately leads to melanin oligomers. Recently, relevant studies disclosed the ability of Ti-based nanostructures to tune melanin's supramolecular structure during its formation, starting from melanogenic precursors, thus improving both antioxidant and antimicrobial properties. In this work, we propose a novel biomimetic approach to design hybrid DOPA melanin-like nanostructures through a hydrothermal synthesis opportunely modified by using citric acid to control hydrolysis and condensation reactions of titanium alkoxide precursors. UV-Vis and Electron paramagnetic resonance (EPR) spectroscopic evidences highlighted the key role of citrate-Ti(IV) and DOPA-Ti(IV) complexes in controlling DOPA polymerization, which specifically occurred during the hydrothermal step, mediating and tuning its conversion to melanin-like oligomers. Trasmission electron microscopy (TEM) images proved the efficacy of the proposed synthesis approach in tuning the formation of nanosized globular nanostructures, with high biocide performances. The obtained findings could provide strategic guidelines to set up biomimetic processes, exploiting the catechol-metal complex to obtain hybrid melanin-like nanosystems with optimized multifunctional behavior.

Glycerol-mediated synthesis of nanoscale zerovalent iron and its application for the simultaneous reduction of nitrate and alachlor

NZVI has long been used for the remediation of different groundwater contaminants but their tendency to get oxidized easily has always been a barrier to their reductive ability. In this work, we have made an attempt to enhance the aerobic stability of the nanoparticles by synthesizing them in a medium consisting of a viscous solvent, glycerol, and water. The XRD analysis of the nanoparticles reveals that the particles prepared in the presence of glycerol have a very thin coating of iron oxides on the outer surface of the nanoparticles in comparison with those prepared in the aqueous medium. These nanoparticles were applied for the simultaneous reduction of two groundwater contaminants, nitrate ions, and alachlor, which is an herbicide. Stock solutions of these two contaminants were prepared and then they were mixed in varying amounts and were treated by different doses of the nanoparticle. The optimized dose of the nanoparticles obtained for almost 97% removal of both the contaminants is 2.05 g/L. The studies showed that increasing the concentration of either of the contaminants while the other one was kept fixed led to a decrease in the removal efficiency. The studies conducted to see the effect of pH variation showed that the best removal can be achieved when the pH is 3 or even less than it, showing that acidic pH leads to higher removal values. Such nanoparticles which can be prepared easily at low-cost and can simultaneously act upon different contaminants are highly desired.

Nanomaterials for the Removal of Heavy Metals from Wastewater

Removal of contaminants in wastewater, such as heavy metals, has become a severe problem in the world. Numerous technologies have been developed to deal with this problem. As an emerging technology, nanotechnology has been gaining increasing interest and many nanomaterials have been developed to remove heavy metals from polluted water, due to their excellent features resulting from the nanometer effect. In this work, novel nanomaterials, including carbon-based nanomaterials, zero-valent metal, metal-oxide based nanomaterials, and nanocomposites, and their applications for the removal of heavy metal ions from wastewater were systematically reviewed. Their efficiency, limitations, and advantages were compared and discussed. Furthermore, the promising perspective of nanomaterials in environmental applications was also discussed and potential directions for future work were suggested.

Facile synthesis of ZrO2 coated BiOCl0.5I0.5 for photocatalytic oxidation-adsorption of As(III) under visible light irradiation

ZrO₂ modified BiOCl_0.5I_0.5 composites (ZBCI), synthesized via a facile precipitation method at room temperature, were utilized to photocatalytically oxidize and adsorb arsenite from water under visible light irradiation. The composites were well characterized by using various techniques. With visible light irradiation, 5 mg L^-1 of As(III) could be completely removed by ZBCI (0.25 g L^-1) in 90 min. Particularly, we found that ZBCI composites not only could oxidize As(III) into As(V) with visible light irradiation, but also could effectively capture the generated As(V), leading to the negligible residual As(III) or As(V) in aqueous solutions after 90 min treatment. In the fabricated composites, ZrO₂ acted as the main adsorption sites while BiOCl_0.5I_0.5 served as the primary photocatalysis center. Because of the heterostructure of ZBCI, e^- generated by BiOCl_0.5I_0.5 would be transferred to ZrO₂ and inhibited e^--h⁺ recombination rate, contributing to the improved photocatalytic efficiency. ZBCI could effectively remove As(III) over a broad range of pH from 3 to 11. Chloride and nitrate did not obviously affect the photocatalytic As(III) removal, while sulfate and phosphate yet reduced the capture of As(III). Moreover, ZBCI composites exhibited high photocatalytic As(III) removal efficiency during the fourth reused cycles. The facile synthesized ZBCI could be employed to capture and oxidize As(III) from water.

Green synthesis of mesoporous γ-Al2O3 from coal fly ash with simultaneous on-site utilization of CO2

Mesoporous Al₂O₃ with crystalline framework walls has expanded all over the world due to the various potential applications especially in catalysis. Here, we develop a green and facile approach for the conversion of coal fly ash (CFA) into ordered mesoporous γ-Al₂O₃. The practical and promising lime-sinter method was comprehensively studied for the extraction of aluminum from CFA as a first step. The extraction efficiency of aluminum could reach up to 87.42%, through calcining with CaCO₃ at 1390°C for 1 h and then dissolving in Na₂CO₃ solution at 70°C for 0.5 h. Combined with the urgent demand for CO₂ emission reduction, simulated purified flue gas was introduced to precipitate the Al(OH)₃ precursors without structure-directing agents for just 1 h, followed by calcining at only 400°C or 550°C. A series of characterizations were conducted to discuss the effect of precipitation temperature and calcination temperature, resulting the superior product (Al₂O₃-65/550) with high surface area (230.3 m² g^-1), crystalline γ-Al₂O₃ phase and ordered mesostructure. This proposed strategy, integrating the on-site recycling of CFA and utilization of CO₂, appears to be promising for scalable production of mesoporous γ-Al₂O₃.

Hybrid functionalized chitosan-Al2O3@SiO2 composite for enhanced Cr(VI) adsorption

In this study, we prepared a novel hybrid functionalized chitosan-Al₂O₃@SiO₂ composite (FCAS) for removing hexavalent chromium [Cr(VI)] from aqueous system. Spectroscopic studies like Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive spectroscope (EDS) were characterized. The effects such as dosage of adsorbent, pH, contact time and initial Cr(VI) concentration were evaluated. It has been illustrated that a wide acidic condition in the pH range of 2-6 was conducive to Cr(VI) adsorption and only 10 min was required to reach about 80% adsorption. Also, the adsorption properties of prepared adsorbent such as kinetics, thermodynamics and isotherms were comprehensively studied. Additionally, the adsorption capacity barely declined even after five cycles. Studies found that FCAS with characteristics of high performance of adsorption rate and capacity and better reusability would be a potential adsorbent for wastewater treatment.

Advanced Nanomaterials for the Removal of Chemical Substances and Microbes From Contaminated and Waste Water

The development of cost-effective, efficient and stable materials helps to provide the affordable solutions to get safe and fresh water to increasing population with health guidelines of emerging contaminants. Nanomaterials (NMs)-based techniques involve the design, synthesis, manipulation, characterization and exploitation of materials for adsorption and separation of target species from the contaminated and waste water. NMs show better adsorption capacity and catalytic for number chemical species and microbes because of their small size and large surface area that favors the purification and treatment of waste or contaminated environmental water. Here, we present the chemical properties, adsorption/removal mechanism and applications of advanced NMs such as magnetic nanoparticles (MNPs), carbon nanotubes (CNTs), graphene and graphene oxide (GO), titanium oxide (TiO2), silica (SiO2), silver (Ag), gold (Au) NPs and zeolites in effective and efficient removal of toxic metal ions, organic and inorganic chemical substances and disease-causing microbes from contaminated and wastewater.

The global menace of arsenic and its conventional remediation - A critical review

Arsenic is a ubiquitous element found in the earth crust with a varying concentration in the earth soil and water. Arsenic has always been under the scanner due to its toxicity in human beings. Contamination of arsenic in drinking water, which generally finds its source from arsenic-containing aquifers; has severely threatened billions of people all over the world. Arsenic poisoning is worse in Bangladesh where As(III) is abundant in waters of tube wells. Natural occurrence of arsenic in groundwater could result from both, oxidative and reductive dissolution. Geothermally heated water has the potential to liberate arsenic from surrounding rocks. Inorganic arsenic has been found to have more toxicity than the organic forms of arsenic. MMA and DMA are now been considered as the organic arsenic compounds having the potential to impair DNA and that is why MMA and DMA are considered as carcinogens. Endless efforts of researchers have elucidated the source, behavior of arsenic in various parts of the environment, mechanism of toxicity and various remediation processes; although, there are lots of areas still to be addressed. In this article, attempts have been made to lay bare an overview of geochemistry, toxicity and current removal techniques of arsenic together.

Morphology evolution of single-crystalline hematite nanocrystals: magnetically recoverable nanocatalysts for enhanced facet-driven photoredox activity

We have developed a new green chemical approach for the shape-controlled synthesis of single-crystalline hematite nanocrystals in aqueous medium. FESEM, HRTEM and SAED techniques were used to determine the morphology and crystallographic orientations of each nanocrystal and its exposed facets. PXRD and HRTEM techniques revealed that the nanocrystals are single crystalline in nature; twins and stacking faults were not detected in these nanocrystals. The structural, vibrational, and electronic spectra of these nanocrystals were highly dependent on their shape. Different shaped hematite nanocrystals with distinct crystallographic planes have been synthesized under similar reaction conditions, which can be desired as a model for the purpose of properties comparison with the nanocrystals prepared under different reaction conditions. Here we investigated the photocatalytic performance of these different shaped-nanocrystals for methyl orange degradation in the presence of white light (λ > 420 nm). In this study, we found that the density of surface Fe(3+) ions in particular facets was the key factor for the photocatalytic activity and was higher on the bitruncated-dodecahedron shape nanocrystals by coexposed {104}, {100} and {001} facets, attributing to higher catalytic activity. The catalytic activity of different exposed facet nanocrystals were as follows: {104} + {100} + {001} (bitruncated-dodecahedron) > {101} + {001} (bitruncated-octahedron) > {001} + {110} (nanorods) > {012} (nanocuboid) which provided the direct evidence of exposed facet-driven photocatalytic activity. The nanocrystals were easily recoverable using an external magnet and reused at least six times without significant loss of its catalytic activity.

A property-performance correlation and mass transfer study of As(v) adsorption on three mesoporous aluminas

The order of long-range atomic arrangement obviously decreases in the order MA3 > MA2 > MA1 and is inversely correlated with the adsorption abilities of these aluminas. Therefore, strongly disordered atomic arrangements enhance the As(v) uptake abilities of these aluminas.

Magnetic memory effect in self-assembled nickel ferrite nanoparticles having mesoscopic void spaces

We report a novel approach for fabricating nanocrystalline and mesoporous nickel ferrite nanoparticles of ca. 5–9 nm size and it showed interesting memory effect as a consequence of interparticle interaction of self-assembled nanoparticles.

Fabrication of hierarchically mesoporous CuO nanostructures and their role as heterogenous catalysts and sensors

Tween-80 templated mesoporous CuO (mpCuO) nanostructures were explored via a facile, environmentally friendly and scalable sol–gel route for heterogeneous catalysis and sensor technology.

Comparison of Fe-Al-modified natural materials by an electrochemical method and chemical precipitation for the adsorption of F- and As(V)

The adsorption of fluoride and arsenic ions by modified natural materials may have an impact on the removal of F- and As(V) from waters. In this work, a zeolitic material and pozzolan (commonly known as pumicite) were modified with aluminium an iron by an electrochemical method and chemical precipitation, respectively. The adsorbents were characterized by X-ray diffraction, scanning electron microscopy with energy X-ray disperse spectroscopy analysis and the point of zero charge (pHzpc). F- and As(V) adsorption properties of both materials were investigated. Adsorption kinetic data were best fitted to pseudo-second-order model and equilibrium data to the Langmuir isotherm model. The highest F- and As(V) sorption capacities were obtained for modified zeolitic (0.866 mg/g) and pozzolan (3.35 mg/g) materials, respectively, with initial F- or As(V) concentrations of 10 mg/L. It was found that the unmodified materials did not show either adsorption of F- ions or As(V), which indicated that Al and Fe in the adsorbents are responsible for the adsorption of these ions. In general, both modified materials show similar capacities for the adsorption of F- and As(V).

Mesoporous BaTiO₃@SBA-15 derived via solid state reaction and its excellent adsorption efficiency for the removal of hexavalent chromium from water

We report the synthesis of a barium-titanate/mesoporous silica nanocomposite material BaTiO3@SBA-15 via aerosol assisted solid state reaction using SBA-15 as a hard template. Hexavalent chromium is one of the most harmful contaminants of industrial waste-water. We have used BaTiO3@SBA-15 nanocomposite as an adsorbent for the removal of chromium(vi)-contaminated water and it showed an adsorption capacity of 98.2 wt% within only 40 min contact time in a batch reactor. This mesoporous composite has retained this excellent adsorption efficiency of hexavalent chromium for several repetitive cycles, suggesting its future potential for the remediation of water contaminated with Cr(vi).

Arsenic removal by nanoparticles: a review

Contamination of natural waters with arsenic, which is both toxic and carcinogenic, is widespread. Among various technologies that have been employed for arsenic removal from water, such as coagulation, filtration, membrane separation, ion exchange, etc., adsorption offers many advantages including simple and stable operation, easy handling of waste, absence of added reagents, compact facilities, and generally lower operation cost, but the need for technological innovation for water purification is gaining attention worldwide. Nanotechnology is considered to play a crucial role in providing clean and affordable water to meet human demands. This review presents an overview of nanoparticles and nanobased adsorbents and its efficiencies in arsenic removal from water. The paper highlights the application of nanomaterials and their properties, mechanisms, and advantages over conventional adsorbents for arsenic removal from contaminated water.

Arsenic contamination, consequences and remediation techniques: a review

The exposure to low or high concentrations of arsenic (As), either due to the direct consumption of As contaminated drinking water, or indirectly through daily intake of As contaminated food may be fatal to the human health. Arsenic contamination in drinking water threatens more than 150 millions peoples all over the world. Around 110 millions of those peoples live in 10 countries in South and South-East Asia: Bangladesh, Cambodia, China, India, Laos, Myanmar, Nepal, Pakistan, Taiwan and Vietnam. Therefore, treatment of As contaminated water and soil could be the only effective option to minimize the health hazard. Therefore, keeping in view the above facts, an attempt has been made in this paper to review As contamination, its effect on human health and various conventional and advance technologies which are being used for the removal of As from soil and water.