Possible role of laccase from Fusarium incarnatum UC-14 in bioremediation of Bisphenol A using reverse micelles system

Enhanced biocatalytic laccase production using agricultural waste in solid-state fermentation by Aspergillus oryzae for p-chlorophenol degradation

Agricultural residues are one of the most cost-effective and readily accessible carbon resources for producing commercially significant enzymes. Several enzymes have been used in different industries like pharmaceuticals, foods, textiles, and dyes that can be generated by various species of microbes found in waste from agriculture. The current research investigated laccase production by Aspergillus oryzae utilizing agricultural wastes. Physical and chemical properties, including pH, temperature, sucrose, yeast extract, and copper sulfate levels, were optimized. The utilization of the response surface methodology along with the centralized composite design method, which assesses multiple media parameters and utilizes a two-level experimental approach, aids in determining the variable and its significance in increasing production quality. The centralized composite design enhancement showed that the optimal conditions for highest laccase activity (623.16 U/mL) were pH 7.0, temperature 25 °C, corn cobs as substrate, sucrose (2.0 %), yeast extract (1.0 %), and copper sulfate (0.1 mM) level. The laccase enzyme was optimized using various pH, temperature, metal ions, and inhibitors combinations. The extracted laccase enzyme maximum activity was attained at pH 6.0 and 40 °C. The inclusion of divalent ions can enhance laccase activity, while the use of various inhibitors decreases laccase activity. Under various pH circumstances, the Aspergillus oryzae laccase enzyme can successfully degrade p-chlorophenol. The present study describes statistically validated optimal methodologies for enhancing laccase synthesis, leading to a laccase production technique that is simultaneously highly efficient and economically profitable, with possible use of p-chlorophenol degradation.

A novel univariate interpolation and bivariate regression hybrid method application to biodegradation of bisphenol A diglycidyl ether using laccases from Geobacillus stearothermophilus and Geobacillus thermoparafinivorans strains

Bisphenol A diglycidyl ether (BADGE), a derivative of the well-known endocrine disruptor Bisphenol A (BPA), is a potential threat to long-term environmental health due to its prevalence as a micropollutant. This study addresses the previously unexplored area of BADGE toxicity and removal. We investigated, for the first time, the biodegradation potential of laccase isolated from Geobacillus thermophilic bacteria against BADGE. The laccase-mediated degradation process was optimized using a combination of response surface methodology (RSM) and machine learning models. Degradation of BADGE was analyzed by various techniques, including UV-Vis spectrophotometry, high-performance liquid chromatography (HPLC), Fourier transform infrared (FTIR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS). Laccase from Geobacillus stearothermophilus strain MB600 achieved a degradation rate of 93.28% within 30 min, while laccase from Geobacillus thermoparafinivorans strain MB606 reached 94% degradation within 90 min. RSM analysis predicted the optimal degradation conditions to be 60 min reaction time, 80°C temperature, and pH 4.5. Furthermore, CB-Dock simulations revealed good binding interactions between laccase enzymes and BADGE, with an initial binding mode selected for a cavity size of 263 and a Vina score of -5.5, which confirmed the observed biodegradation potential of laccase. These findings highlight the biocatalytic potential of laccases derived from thermophilic Geobacillus strains, notably MB600, for enzymatic decontamination of BADGE-contaminated environments.

UVB light influence on the laccase enzyme catalytic activity in reverse micelles and in homogeneous aqueous medium

Laccase is a versatile enzyme widely used for the oxidation of environmental contaminants and exhibits great potential in many others applications; however, it undergoes photo-degradation when irradiated with UVB light. The photo-stability of this biomolecule can be improved by immobilization in different encapsulation media and reverse micelles have been employed with this purpose. The laccase activity using syringaldazine as substrate has been studied in the absence and in the presence of reverse micelles of 0.15 M of sodium 1,4-bis (2-ethylhexyl) sulfosuccinate (AOT) in isooctane at W₀ ([H₂O]/[AOT]) = 30, before and after irradiation of the enzyme with UVB light. The kinetic parameters, i.e., Michaelis-Menten constant (K_M), catalytic constant (k_CAT), and catalytic efficiency (k_CAT/K_M), were determined by spectroscopic measurements in the micellar system and in homogeneous aqueous medium. The distribution of the substrate in two pseudo-phases (micelle and organic solvent) was taking into account in the kinetic parameters' determinations. The results obtained indicate that the nano-aggregate system confers a solubilization media in the water core of the micelle, both for the enzyme and the substrate, in which the catalytic function of the enzyme is preserved. On the other hand, in homogeneous aqueous medium k_CAT/K_M value, it is reduced by ~50% after UVB irradiation of the enzyme, while in micellar medium, less than 10% of the activity was affected. This mean that the enzyme achieves a considerably photo-protection when it is irradiated with UVB light in reverse micelles as compared with the homogeneous aqueous medium. This phenomenon can be mainly due to the confinement of the biomolecule inside the micelle. Physical properties of the nano-environment could affect photochemical reactions.

Purification and biochemical characterization of two laccase isoenzymes isolated from Trichoderma harzianum S7113 and its application for bisphenol A degradation

Two laccase isoenzymes (LacA and LacB) were isolated from a novel Trichoderma harzianum S7113 isolate employing ammonium sulfate precipitation, Sephadex G100, and DEAE Sepharose ion exchange chromatography. The molecular weights of the purified LacA and LacB laccases were estimated to be 63 and 48 kDa, respectively. The two isoenzymes had their optimum activities at the same temperature (50 °C), but at slightly different pH values (pH 3.0 for LacA and pH 2.5 for LacB). LacA and LacB had the same thermal stability at 40 °C and pH stability at pH 9.0. The two isoenzymes also showed a high level of specific activity toward ABTS, where the K_m values of LacA and LacB were 0.100 and 0.065 mM, whereas their V_max values were 0.603 and 0.182 µmol min^-1, respectively. LacA and LacB catalytic activity was stimulated by Mg²⁺, Zn²⁺, K⁺, and Ni²⁺, whereas it was inhibited by Hg²⁺ and Pb²⁺, β-mercaptoethanol, EDTA, and SDS, and completely inhibited by sodium azide. Our findings indicate that purified laccase has a promising capacity for bisphenol A (BPA) bioremediation across a broad pH range. This finding opens up new opportunities for the commercialization of this technique in a variety of biotechnology-based applications, particularly for removing endocrine chemicals from the environment.

Bisphenol A in the environment and recent advances in biodegradation by fungi

Bisphenol A (BPA) is a compound used in the manufacture of a wide variety of everyday materials that, when released into the environment, causes multiple detrimental effects on humans and other organisms. The reason for this review is to provide an overview of the presence, distribution, and concentration of BPA in water, soil, sediment, and air, as well as the process of release and migration, biomagnification, and exposure mechanisms that cause various toxic effects in humans. Therefore, it is important to seek efficient and economic strategies that allow its removal from the environment and prevent it from reaching humans through food chains. Likewise, the main removal techniques are analyzed, focusing on biological treatments, particularly the most recent advances in the degradation of BPA in different environmental matrices through the use of ligninolytic fungi, non-ligninolytic fungi and yeasts, as well as the possible routes of metabolic processes that allow their biotransformation or biodegradation due to their efficient extracellular enzyme systems. This review supports the importance of the application of new biotechnological tools for the degradation of BPA.

Laccase immobilized on amino-functionalized magnetic Fe3O4-SiO2 core-shell material for 2,4-dichlorophenol removal

In this study, an amino-functionalized magnetic silica microsphere material (Fe₃O₄-SiO₂-NH₂) was prepared. Using glutaraldehyde as a cross-linking agent, Trametes versicolor laccase was adsorbed-covalently bonded and immobilized on the material to prepare Laccase @ Fe₃O₄-SiO₂. In addition, the materials were characterized and analysed by SEM, TEM, XRD, FT-IR and VSM. Finally, the thermal inactivation dynamics of immobilized laccase in polar/non-polar/toxic systems and the adsorption and degradation of 2,4-DCP were studied. The results showed that Laccase @ Fe₃O₄-SiO₂ under the optimal conditions (pH 6, temperature 65°C, initial concentration of 2,4-DCP 10 mg/L), the removal rate was as high as 81.6%. Moreover, compared with free laccase, immobilized laccase had good tolerance under low pH and high-temperature conditions, and storage stability was also greatly improved. After repeated use for 7 times, Laccase @ Fe₃O₄-SiO₂ can still maintain 59% removal rate of 2,4-DCP, which gives it the potential for industrial applications.

Enhanced periphyton biodegradation of endocrine disrupting hormones and microplastic: Intrinsic reaction mechanism, influential humic acid and microbial community structure elucidation

Endocrine-disrupting compounds (EDCs), as well as microplastics, have drawn global attention due to their presence in the aquatic ecosystem and persistence in wastewater treatment plants (WWTPs). In the present study, for simultaneous bio-removal of two EDCs, 17α-ethinylestradiol (EE2), bisphenol A (BPA), and a microplastic, polypropylene (PP) four kinds of periphytic biofilms were employed. Additionally, the effect of humic acid (HA) on the removal efficacy of these biofilms was evaluated. It was observed that EE2 and BPA (0.2 mg L^-1 each) were completely (∼100%) removed within 36 days of treatment; and the biodegradation of EE2, BPA, and PP was significantly enhanced in the presence of HA. Biodegradation of EE2 and BPA was evaluated through Ultra-high performance liquid chromatography (UHPLC), and Gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) was used to determine the mechanism of degradation. Gel permeation chromatography (GPC) and SEM had validated the biodegradation of PP (5.2-14.7%). MiSeqsequencing showed that the community structure of natural biofilm changed after the addition of HA, as well as after the addition of EDCs and PP. This change in community structure might be a key factor regarding variable biodegradation percentages. The present study revealed the potential of periphytic biofilms for the simultaneous removal of pollutants of different chemical natures, thus provides a promising new method for wastewater treatment applications.

Biodiversity and biocatalyst activity of culturable hydrocarbonoclastic fungi isolated from Marac-Moruga mud volcano in South Trinidad

Mud volcanoes (MVs) are visible signs of oil and gas reserves present deep beneath land and sea. The Marac MV in Trinidad is the only MV associated with natural hydrocarbon seeps. Petrogenic polyaromatic hydrocarbons (PAHs) in its sediments must undergo biogeochemical cycles of detoxification as they can enter the water table and aquifers threatening ecosystems and biota. Recurrent hydrocarbon seep activity of MVs consolidates the growth of hydrocarbonoclastic fungal communities. Fungi possess advantageous metabolic and ecophysiological features for remediation but are underexplored compared to bacteria. Additionally, indigenous fungi are more efficient at PAH detoxification than commercial/foreign counterparts and remediation strategies remain site-specific. Few studies have focused on hydrocarbonoclastic fungal incidence and potential in MVs, an aspect that has not been explored in Trinidad. This study determined the unique biodiversity of culturable fungi from the Marac MV capable of metabolizing PAHs in vitro and investigated their extracellular peroxidase activity to utilize different substrates ergo their extracellular oxidoreductase activity (> 50% of the strains decolourized of methylene blue dye). Dothideomycetes and Eurotiomycetes (89% combined incidence) were predominantly isolated. ITS rDNA sequence cluster analysis confirmed strain identities. 18 indigenous hydrocarbonoclastic strains not previously reported in the literature and some of which were biosurfactant-producing, were identified. Intra-strain variability was apparent for PAH utilization, oil-tolerance and hydroxylase substrate specificity. Comparatively high levels of extracellular protein were detected for strains that demonstrated low substrate specificity. Halotolerant strains were also recovered which indicated marine-mixed substrata of the MV as a result of deep sea conduits. This work highlighted novel MV fungal strains as potential bioremediators and biocatalysts with a broad industrial applications.

Bioremediation of phenolic pollutant bisphenol A using optimized reverse micelles system of Trametes versicolor laccase in non-aqueous environment

In recent times, there is increased public interest and indeed strong movement against the use of Bisphenol A (4,4'-(propane-2,2,-diphenol)) due to its endocrine disrupting properties. In the present study, biotransformation of Bisphenol A (BPA) was accomplished using Trametes versicolor laccase (E.C. 1.10.3.2) enzyme. The enzyme was entrapped in reverse micelles comprising of bis(2-ethylhexyl) sulfosuccinate sodium salt (AOT) and 2,2,4-trimethylpentane (isooctane) for non-aqueous catalysis considering hydrophobicity of BPA. Screening of various parameters that may affect micellar system was carried out using Plackett-Burman experimental design and central composite design (Design Expert 11). According to Design Expert actual concentration of different variables was 0.55, 150 (Wo 30), 0.0035 mM and 175 µg/ml for Mg⁺²ions, Hydration ratio (Wo), 2,6-dimethoxyphenol (2,6 DMP, substrate) and laccase, respectively, at 40 °C and pH 4.5. Under these conditions laccase activity in reverse micelles was increased two folds as compared to unoptimized micellar system. It was evident that the reverse micelles diameter was linearly proportionated to the amount of laccase enzyme incorporated. BPA bioremediation mediated by laccase in non-aqueous environment was found to be 84% in 8 h of treatment. Biotransformation of BPA was monitored using GC-MS. BPA degraded products, such as BPA-O-catechol and 4,4 (Ethane 2-oxy 2-ol) diphenol were identified indicating transformation by oxidation.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02842-4.

Effect of UVB solar irradiation on Laccase enzyme: evaluation of the photooxidation process and its impact over the enzymatic activity for pollutants bioremediation

The multi-copper Laccase enzyme corresponds to one of the most investigated oxidoreductases for potential uses in xenobiotic bioremediation. In this work, we have investigated the photo-degradation process of Laccase from Trametesversicolor induced by UVB light and the influence on its activity over selected substrates. Laccase undergoes photo-degradation when irradiated with UVB light, and the process depends on the presence of oxygen in the medium. With the kinetic data obtained from stationary and time resolved measurements, a photo-degradation mechanism of auto-sensitization was proposed for the enzyme. Laccase generates singlet oxygen, by UVB light absorption, and this reactive oxygen species can trigger the photo-oxidation of susceptible amino acids residues present in the protein structure. The catalytic activity of Laccase was evaluated before and after UVB photolysis over hydroxy-aromatic compounds and substituted phenols which represent potential pollutants. The dye bromothymol blue, the antibiotic rifampicin and the model compound syringaldazine, were selected as substrates. The values of the kinetic parameters determined in our experiments indicate that the photo-oxidative process of Laccase has a very negative impact on its overall catalytic function. Despite this, we have not found evidence of structural damage by SDS-PAGE and circular dichroism experiments, which indicate that the enzyme retained its secondary structure. We believe that, given the importance of Laccase in environmental bioremediation, the information found about the stability of this kind of biomolecule exposed to UV solar irradiation may be relevant in the technological design and/or optimization of decontamination strategies.

Degradation of several polycyclic aromatic hydrocarbons by laccase in reverse micelle system

Remediation of polycyclic aromatic hydrocarbons (PAHs) in oily sludge has become the focus of attention. UV spectrophotometer analysis showed that four types of PAHs were found in sample, which including phenanthrene, anthracene, benzo(a)anthracene and benzo(b)fluoranthene. In order to degrade PAH effectively, the laccase reverse micelles system was proposed. The system protects laccase from being affected by organic phase. Reverse micelles were prepared by using isooctane to simulate oil. The optimum water content W₀ was 10 by measuring the electrical conductivity of the system. Under this condition, the effects of pH, temperature and ionic strength on the degradation rate of PAHs were investigated. Also, compared with that of non-immobilized laccase, the ratio between the secondary structures of laccase under different conditions was studied. The results showed that the highest laccase activity was obtained at pH 4.2 and 30 °C with 60 mmol/L KCl. Meanwhile, the structure of α-helix accounts for the largest proportion, and the ratio of α-helix in the laccase secondary structure in the laccase-reverse micelle system was higher than that of the non-immobilized one under this condition. Finally, predicting the reactive site of the degradation of polycyclic aromatic hydrocarbons was simulated by ORCA (Version 4.2.0). The application in oily sludge was further conducted. This study provides an effective method and basis for the degradation of PAHs in oily sludge.

Biodegradation of the endocrine disrupter 4-t-octylphenol by the non-ligninolytic fungus Fusarium falciforme RRK20: Process optimization, estrogenicity assessment, metabolite identification and proposed pathways

4-t-octylphenol (4-t-OP), a well-known endocrine disrupting compound, is frequently found in various environmental compartments at levels that may cause adverse effects to the ecosystem and public health. To date, most of the studies that investigate microbial transformations of 4-t-OP have focused on the process mediated by bacteria, ligninolytic fungi, or microbial consortia. There is no report on the complete degradation mechanism of 4-t-OP by non-ligninolytic fungi. In this study, we conducted laboratory experiments to explore and characterize the non-ligninolytic fungal strain Fusarium falciforme RRK20 to degrade 4-t-OP. Using the response surface methodology, the initial biomass concentration and temperature were the factors identified to be more influential on the efficiency of the biodegradation process as compared with pH. Under the optimized conditions (i.e., 28 °C, pH 6.5 with an initial inoculum density of 0.6 g L^-1), 25 mg L^-1 4-t-OP served as sole carbon source was completely depleted within a 14-d incubation; addition of low dosage of glucose was shown to significantly accelerate 4-t-OP degradation. The yeast estrogenic screening assay further confirmed the loss of estrogenic activity during the biodegradation process, though a longer incubation period was required for complete removal of estrogenicity. Metabolites identified by LC-MS/MS revealed that strain RRK20 might degrade 4-t-OP as sole energy source via alkyl chain oxidation and aromatic ring hydroxylation pathways. Together, these results not only suggest the potential use of non-ligninolytic fungi like strain RRK20 in remediation of 4-t-OP contaminated environments but may also improve our understanding of the environmental fate of 4-t-OP.

Application of experimental designs and response surface methods in screening and optimization of reverse micellar extraction

Reverse micellar extraction (RME) has emerged as a versatile and efficient tool for downstream processing (DSP) of various biomolecules, including structural proteins and enzymes, due to the substantial advantages over conventional DSP methods. However, the RME system is a complex dependency of several parameters that influences the overall selectivity and performance of the RME system, hence this justifies the need for optimization to obtain higher possible extraction results. For the last two decades, many experimental design strategies for screening and optimization of RME have been described in literature. The objective of this article is to review the use of different experimental designs and response surface methodologies that are currently used to screen and optimize the RME system for various types of biomolecules. Overall, this review provides the rationale for the selection of appropriate screening or optimization techniques for the parameters associated with both forward and backward extraction during the RME of biomolecules.

Biocontrol of Aspergillus and Fusarium Mycotoxins in Africa: Benefits and Limitations

Fungal contamination and the consequent mycotoxin production is a hindrance to food and feed safety, international trade and human and animal health. In Africa, fungal contamination by Fusarium and Aspergillus is heightened by tropical climatic conditions that create a suitable environment for pre- and postharvest mycotoxin production. The biocontrol of Fusarium and its associated fusariotoxins has stagnated at laboratory and experimental levels with species of Trichoderma, Bacillus and atoxigenic Fusarium being tested as the most promising candidates. Hitherto, there is no impetus to upscale for field use owing to the inconsistent results of these agents. Non-aflatoxigenic strains of Aspergillus have been developed to create biocontrol formulations by outcompeting the aflatoxigenic strains, thus thwarting aflatoxins on the target produce by 70% to 90%. Questions have been raised on their ability to produce other mycotoxins like cyclopiazonic acid, to potentially exchange genetic material and to become aflatoxigenic with consequent deleterious effects on other organisms and environments. Other biocontrol approaches to mitigate aflatoxins include the use of lactic acid bacteria and yeast species which have demonstrated the ability to prevent the growth of Aspergillus flavus and consequent toxin production under laboratory conditions. Nevertheless, these strategies seem to be ineffective under field conditions. The efficacy of biological agents is normally dependent on environmental factors, formulations' safety to non-target hosts and the ecological impact. Biocontrol agents can only be effectively evaluated after long-term use, causing a never-ending debate on the use of live organisms as a remedy to pests and diseases over the use of chemicals. Biocontrol should be used in conjunction with good agricultural practices coupled with good postharvest management to significantly reduce mycotoxins in the African continent.

Spore cells from BPA degrading bacteria Bacillus sp. GZB displaying high laccase activity and stability for BPA degradation

Laccase has been applied extensively as a biocatalyst to remove different organic pollutants. This study characterized a spore-laccase from the bisphenol A (BPA)-degrading strain Bacillus sp. GZB. The spore-laccase was encoded with 513 amino acids, containing spore coat protein A (CotA). It showed optimal activity at 70 °C and pH = 7.2 in presence of 2, 6-dimethoxyphenol. At 60 °C, optimal activity was also seen at pH = 3.0 and pH = 6.8 with 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonate) and syringaldazine, respectively. The spore-laccase was stable at high temperature, at acidic to alkaline pH values, and in the presence of different organic solvents. Spore-laccase activity was increased by introducing Cu²⁺, Mg²⁺, and Na⁺, but was strongly inhibited by Fe²⁺, Ag⁺, l-cysteine, dithiothreitol, and NaN₃. The cotA gene was cloned and expressed in E. coli BL21 (DE3); the purified protein was estimated as having a molecular weight of ~63 kDa. Different synthetic dyes and BPA were effectively decolorized or degraded both by the spore laccase and recombinant laccase. When BPA oxidation was catalyzed using laccase, there was an initial formation of phenoxy radicals and further oxidation or CC bond cleavage of the radicals produced different organic acids. Detailed reaction pathways were developed based on nine identified intermediates. The acute toxicity decreased gradually during BPA degradation by laccase. This study is the first report about a genus of Bacillus that can produce a highly active and stable laccase to degrade BPA.

Facile preparation of microscale hydrogel particles for high efficiency adsorption of bisphenol A from aqueous solution

Hydrogel microparticles (HMPs) were synthesized via reverse emulsion/UV light polymerization and employed as adsorbents for removing bisphenol A (BPA) from aqueous solution. Results demonstrated the smooth surface of HMPs, with particle size ranging from 137 to 535 μm. Functional groups, including -OH, C-O, C=O, and C-H, are all involved in BPA adsorption confirmed by FTIR. Effect of solution pH, contact time, and initial BPA concentration on adsorption process was examined. The adsorption capacity was found pH independent below pH 8.0 and decreased when pH values greater than 8.0. The maximum adsorption capacity of the HMPs for BPA was 174.77 mg/g. The adsorption process achieved an equilibrium state within 30 min by the pseudo-second-order kinetic rather than the other kinetic models and was fitted well with the Freundlich linear isotherm model. Also, the obtained isotherms reflected the formation of S-type isotherm curve according to Giles's classification. The BPA loaded on the HMPs could be totally regenerated by methanol/dimethylsulfoxide and can be used for five cycles maintaining 100% of adsorption capacity. When the HMPs were applied for the treatment of spiked real surface water, excellent results were also achieved indicating the high efficiency and potential of the adsorbent.

Degradation of bisphenol A and acute toxicity reduction by different thermo-tolerant ascomycete strains isolated from arid soils

Four different laccase-producing strains were isolated from arid soils and used for bisphenol A (BPA) degradation. These strains were identified as Chaetomium strumarium G5I, Thielavia arenaria CH9, Thielavia arenaria HJ22 and Thielavia arenaria SM1(III) by internal transcribed spacer 5.8 S rDNA analysis. Residual BPA was evaluated by HPLC analysis during 48 h of incubation. A complete removal of BPA was observed by the whole cell fungal cultures within different times, depending on each strain. C. strumarium G5I was the most efficient degrader, showing 100% of removal within 8 h of incubation. The degradation of BPA was accompanied by the production of laccase and dye decolorizing peroxidase (DyP) under degradation conditions. The presence of aminobenzotriazole (ABT) as an inhibitor of cytochrome P450s monooxygenases (CYP) demonstrated a slight decrease in BPA removal rate, suggesting the effective contribution of CYP in the conversion. The great involvement of laccase in BPA transformation together with cell-associated enzymes, such as CYP, was supported by the identification of hydroxylated metabolites by ultra-high performance liquid chromatography-mass spectroscopy (UHPLC-MS). The metabolic pathway of BPA transformation was proposed based on the detected metabolites. The acute toxicity of BPA and its products was investigated and showed a significant reduction, except for T. arenaria SM1(III) that did not caused reduction of toxicity (IC₅₀ < 8%), possibly due to the presence of toxic metabolites. The results of the present study point out the potential application of the isolated ascomycetes in pollutant removal processes, especially C. strumarium G5I as an efficient degrader of BPA.

Mineralization of high concentrations of the endocrine disruptor dibutyl phthalate by Fusarium culmorum

Dibutyl phthalate (DBP) is a widely used plasticizer, whose presence in the environment as a pollutant raises concern because of its endocrine-disrupting toxicity. Growth kinetics, glucose uptake, biodegradation constant of DBP (k), half-life of DBP biodegradation (t_1/2) and percentage of removal efficiency (%E) were evaluated for Fusarium culmorum grown on media containing glucose and different concentrations of DBP (500 and 1000 mg/l). Intermediate compounds of biodegraded DBP were identified by GC-MS and a novel DBP biodegradation pathway was proposed on the basis of the intermolecular flow of electrons of the intermediates identified using quantum chemical modeling. F. culmorum degraded 99% of both 1000 and 500 mg of DBP/l after an incubation period of 168 and 228 h, respectively. %E was 99.5 and 99.3 for 1000 and 500 mg of DBP/l, respectively. The k was 0.0164 and 0.0231 h^-1 for 500 and 1000 mg of DBP/l, respectively. DBP was fully metabolized to fumaric and malic acids, which are compounds that enter into the Krebs cycle. F. culmorum has a promising ability for bioremediation of environments polluted with DBP because it efficiently degrades DBP and uses high concentrations of this compound as carbon and energy source.

Flavonoid-rich agro-industrial residues for enhanced bacterial laccase production by submerged and solid-state fermentation

Laccases have potential applications in industrial, biotechnological, and environmental set ups. Development of cost effective and efficient production technologies has gained significant attention in recent years. To enhance the laccase production from Rheinheimera sp. (Gram negative) using submerged fermentation (SmF) and from Lysinibacillus sp. (Gram positive) using solid-state fermentation (SSF), the inducing effect of various flavonoid-rich agro-industrial residues was investigated. Peels of citrus fruits, soybean meal, tofu dreg, lignin monomers, and lingo-cellulosic waste, used tea leaves and peels of onion and kiwi, paper, and dying industry effluents were tested as inducers. In SmF, 0.1% of soybean meal, tofu dreg, and powdered orange peel were best, enhancing the laccase production 2.57-, 2.11-, and 2.05-fold, respectively. In SSF, 10 mg (w/w) of used tata acti green tea leaves per 5 g of wheat bran, 1% pulp and paper industry effluent (agro based), and 1% wine made from Sygium cumini enhanced the laccase production 2.69-, 2.61-, and 2.09-fold, respectively. These results suggest the utilization of these flavonoid and phenolic-rich waste materials to be potential enhancers of industrially important laccase production.

Simultaneous production of laccase and degradation of bisphenol A with Trametes versicolor cultivated on agricultural wastes

Solid state fermentation with Trametes versicolor was carried out on agricultural wastes containing bisphenol A (BPA). It was found that BPA degradation was along with the occurrence of laccase production, and wheat bran and corn straw were identified as suitable mixed substrates for laccase production. In the process of BPA degradation with T. versicolor, laccase activity increased rapidly at the 6th-10th day after inoculation. Moreover, BPA can enhance the production of laccase. After 10 days of fermentation, degradation rate of BPA exceeded 90% without the usage of mediators ABTS and acetosyringone at pH 4.0-8.0. In addition, metal ions did not affect the BPA degradation with T. versicolor. In vitro, the optimum pH range of BPA degradation with laccase was in the acidic region with the optimal performance of pH 5.0. Metal ions Cu²⁺, Zn²⁺, and Co²⁺ showed little effect on BPA degradation. However, Fe³⁺ and Fe²⁺ substantially inhibited the BPA degradation. Natural mediator acetosyringone showed optimum enhancement on BPA degradation. Greater than 90% of the estrogenic activity of BPA was removed by T. versicolor and its laccase. Compared to in vitro degradation with laccase, this study shows that the process of simultaneous laccase production and BPA degradation with T. versicolor was more advantageous since BPA can enhance the laccase production, mediators were unnecessary, degradation rate was not affected by metal ions, and the applicable pH range was broader. This study concludes that T. versicolor and laccase have great potential to treat industrial wastewater containing BPA.

Micellar Enzymology- Chemistry and Applications

Enzymes in aqueous environment usually deal with purified enzyme preparations isolated from living matter which does not mimic real catalytic properties in vivo. Interaction of enzymes in nature takes place with different surfaces composed from lipid membranes or they get incorporated into biomembranes. Although Water is not a dominating component in the cytoplasm but plays a structural role by participating in the formation of biocatalytic complexes like glycoproteins. Water is needed to keep biocatalyst in active confirmation and hence plays very crucial role in biocatalytic reactions, activity and stability so that it can be used for various applications. This review focuses on composition, preparation properties and parameters which influence enzymes in reverse micelles and application of micellar enzymology to study protein chemistry, shifting equilibrium of various reactions, to recover various products by partition chromatography and bioremediation of chlorophenolic environmental pollutants.

Degradation of di(2-ethyl hexyl) phthalate by Fusarium culmorum: Kinetics, enzymatic activities and biodegradation pathway based on quantum chemical modelingpathway based on quantum chemical modeling

Di(2-ethylhexyl) phthalate (DEHP) is a plasticizer widely used in the manufacture of plastics, and it is an environmental contaminant. The specific growth rate (μ), maximum biomass (Xmax), biodegradation constant of DEHP (k), half-life (t1/2) of DEHP biodegradation and removal efficiency of DEHP, esterase and laccase specific activities, and enzymatic yield parameters were evaluated for Fusarium culmorum grown on media containing glucose and different concentrations of DEHP (0, 500 and 1000mg/L). The greatest μ and the largest Xmax occurred in media supplemented with 1000mg of DEHP/L. F. culmorum degraded 95% of the highest amount of DEHP tested (1000mg/L) within 60h of growth. The k and t1/2 were 0.024h(-1) and 28h, respectively, for both DEHP concentrations. The removal efficiency of DEHP was 99.8% and 99.9% for 1000 and 500mg/L, respectively. Much higher specific esterase activity than specific laccase activity was observed in all media tested. The compounds of biodegradation of DEHP were identified by GC-MS. A DEHP biodegradation pathway by F. culmorum was proposed on the basis of the intermolecular flow of electrons of the identified intermediate compounds using quantum chemical modeling. DEHP was fully metabolized by F. culmorum with butanediol as the final product. This fungus offers great potential in bioremediation of environments polluted with DEHP.

Diverse Metabolic Capacities of Fungi for Bioremediation

Bioremediation refers to cost-effective and environment-friendly method for converting the toxic, recalcitrant pollutants into environmentally benign products through the action of various biological treatments. Fungi play a major role in bioremediation owing to their robust morphology and diverse metabolic capacity. The review focuses on different fungal groups from a variety of habitats with their role in bioremediation of different toxic and recalcitrant compounds; persistent organic pollutants, textile dyes, effluents from textile, bleached kraft pulp, leather tanning industries, petroleum, polyaromatic hydrocarbons, pharmaceuticals and personal care products, and pesticides. Bioremediation of toxic organics by fungi is the most sustainable and green route for cleanup of contaminated sites and we discuss the multiple modes employed by fungi for detoxification of different toxic and recalcitrant compounds including prominent fungal enzymes viz., catalases, laccases, peroxidases and cyrochrome P450 monooxygeneses. We have also discussed the recent advances in enzyme engineering and genomics and research being carried out to trace the less understood bioremediation pathways.

Removal of phenol and bisphenol-A catalyzed by laccase in aqueous solution

BACKGROUND

Elimination of hazardous phenolic compounds using laccases has gained attention during recent decades. The present study was designed to evaluate the ability of the purified laccase from Paraconiothyrium variabile (PvL) for elimination of phenol and the endocrine disrupting chemical bisphenol A. Effect of laccase activity, pH, and temperature on the enzymatic removal of the mentioned pollutants were also investigated.

RESULTS

After 30 min treatment of the applied phenolic pollutants in the presence of PvL (5 U/mL), 80% of phenol and 59.7% of bisphenol A was removed. Increasing of laccase activity enhanced the removal percentage of both pollutants. The acidic pH of 5 was found to be the best pH for elimination of both phenol and bisphenol A. Increasing of reaction temperature up to 50°C enhanced the removal percentage of phenol and bisphenol A to 96.3% and 88.3%, respectively.

CONCLUSIONS

To sum up, the present work introduced the purified laccase of P. variabile as an efficient biocatalyst for removal of one of the most hazardous endocrine disruptor bisphenol A.

Microwave assisted synthesis, crystal structure and modelling of cytotoxic dehydroacetic acid enamine: a natural alkaloid from Fusarium incarnatum (HKI0504)

Synthesis and modelling of DHA enamine, its co-crystal structure is presents four-molecules clusters joined by π-stacking like masonry walls.