Different nanostructured In₂O₃ for photocatalytic decomposition of perfluorooctanoic acid (PFOA)

A review on the advancement in photocatalytic degradation of poly/perfluoroalkyl substances in water: Insights into the mechanisms and structure-function relationship

Poly/perfluoroalkyl substances (PFAS) are persistent organic pollutants and ubiquitous in aquatic environment, which are hazardous to organisms and human health. Several countries and regions have taken actions to regulate or limit the production and emission of some PFAS. Even though a series of water treatment technologies have been developed for removal of PFAS to eliminate their potential adverse effects, the removal and degradation performance are usually unsatisfactory. Photocatalytic degradation of PFAS is considered as one of the most effective approaches due to the mild operation conditions and environmental friendliness. This review systematically summarized the recent advances in photocatalytic degradation of PFAS based on heterogeneous photocatalysts, including TiO2-, Ga2O3-, In2O3-, ZnO-, Bi-based, and others. Overall, two mainly degradation mechanisms were involved, including photo-oxidation (involving the holes and oxidative radicals) and photo-reduction types (by e- and reductive radicals). The band structures of the photocatalysts, degradation pathways, structure-function relationship, and impacting factors were further discussed to elucidate the essential reasons for the enhanced degradation of PFAS. Furthermore, the review identified the major knowledge gaps to solve the issues of photocatalysis in real application. This paper also propounded several strategies to promote the design and optimization of high-efficient photocatalysts, and meet the challenges to remove PFAS through photodegradation technologies.

Innovative techniques for combating a common enemy forever chemicals: A comprehensive approach to mitigating per- and polyfluoroalkyl substances (PFAS) contamination

The pervasive presence of per and polyfluoroalkyl substances (PFAS), commonly referred to as "forever chemicals," in water systems poses a significant threat to both the environment and public health. PFAS are persistent organic pollutants that are incredibly resistant to degradation and have a tendency to accumulate in the environment, resulting in long-term contamination issues. This comprehensive review delves into the primary impacts of PFAS on both the environment and human health while also delving into advanced techniques aimed at addressing these concerns. The focus is on exploring the efficacy, practicality, and sustainability of these methods. The review outlines several key methods, such as advanced oxidation processes, novel materials adsorption, bioremediation, membrane filtration, and in-situ chemical oxidation, and evaluates their effectiveness in addressing PFAS contamination. By conducting a comparative analysis of these techniques, the study aims to provide a thorough understanding of current PFAS remediation technologies, as well as offer insights into integrated approaches for managing these persistent pollutants effectively. While acknowledging the high efficiency of adsorption and membrane filtration in reducing persistent organic pollutants due to their relatively low cost, versatility, and wide applicability, the review suggests that the integration of these methods could result in an overall enhancement of removal performance. Additionally, the study emphasizes the need for researcher attention in key areas and underscores the necessity of collaboration between researchers, industry, and regulatory authorities to address this complex challenge.

Synergistic Photocatalysis by α-MoO3 Nanostructures and SWCNT Nanocomposites for Efficient Cross-Linking and Oxidative Degradation of Polystyrene Nanoplastics

Nanoplastics (NPs) generated from plastic debris weathering pose a significant threat to ecosystems. The ubiquity of plastics driven by their advantageous physical properties, necessitates the development of efficient degradation and removal methods. Polystyrene (PS), a common and hazardous aquatic NP is a long-chain hydrocarbon with alternating phenyl groups. This study investigates the photooxidative degradation of PS NPs under UV light irradiation using synthesized MoO3 nanoflakes, nanobelts, and MoO3/SWCNT nanocomposites. Raman spectroscopy, X-ray diffraction, atomic force microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray, Brunauer-Emmett-Teller, and UV-vis spectroscopy were employed to characterize the photocatalyst. Field emission scanning electron microscopy was used to visualize morphological changes in the spherical PS NPs upon interaction with the photocatalysts. MoO3 nanoflakes acting as a photocatalyst under UV irradiation for 24 h achieved an impressive degradation efficiency exceeding 19%. This treatment significantly reduced the average diameter of PS NPs from 220 to 178 nm. Notably, even higher degradation efficiencies were observed with MoO3 nanobelts and nanocomposites as a complete change in the spherical morphology of PS NPs is observed. Fourier transform infrared spectroscopy elucidated the chemical transformations of PS during degradation. The observed changes in PS NPs structure due to photocatalytic oxidation at different time intervals indicate a promising approach.

Acid-Base Cascades in Zeotype Single Crystal for Sugar Conversion

The chemically catalyzed production of fructose syrup from high concentrations of glucose is crucial for the food industry and biorefining. In this work, a single crystal catalyst was synthesized via protective desilication of zeolite while incorporating indium. Glucose was isomerized in methanol at concentrations as high as 33 wt % before being hydrolyzed with water. The final fructose production was 54.9 %, with 89.1 % selectivity and 93.3 % sugar recovery, the highest isomerization rate at the highest concentration ever reported. Indium was present in the single-crystal catalyst as oxide nanoparticles and boundary framework atoms, and it achieved intelligent cooperation in the production of fructose syrup in methanol by catalyzing isomerization and selective glycosidation, minimizing degradation due to fructose accumulation and eliminating side reactions. This study contributed to the advancement of the industrial practice of chemically catalyzed glucose isomerization.

Unveiling nano-empowered catalytic mechanisms for PFAS sensing, removal and destruction in water

Per- and polyfluoroalkyl substances (PFAS) are organofluorine compounds used to manufacture various industrial and consumer goods. Due to their excellent physical and thermal stability ascribed to the strong CF bond, these are ubiquitously present globally and difficult to remediate. Extensive toxicological and epidemiological studies have confirmed these substances to cause adverse health effects. With the increasing literature on the environmental impact of PFAS, the regulations and research have also expanded. Researchers worldwide are working on the detection and remediation of PFAS. Many methods have been developed for their sensing, removal, and destruction. Amongst these methods, nanotechnology has emerged as a sustainable and affordable solution due to its tunable surface properties, high sorption capacities, and excellent reactivities. This review comprehensively discusses the recently developed nanoengineered materials used for detecting, sequestering, and destroying PFAS from aqueous matrices. Innovative designs of nanocomposites and their efficiency for the sensing, removal, and degradation of these persistent pollutants are reviewed, and key insights are analyzed. The mechanistic details and evidence available to support the cleavage of the CF bond during the treatment of PFAS in water are critically examined. Moreover, it highlights the challenges during PFAS quantification and analysis, including the analysis of intermediates in transitioning nanotechnologies from the laboratory to the field.

Photocatalysts for chemical-free PFOA degradation - What we know and where we go from here?

Perfluorooctanoic acid (PFOA) is a toxic and recalcitrant perfluoroalkyl substance commonly detected in the environment. Its low concentration challenges the development of effective degradation techniques, which demands intensive chemical and energy consumption. The recent stringent health advisories and the upgrowth and advances in photocatalytic technologies claim the need to evaluate and compare the state-of-the-art. Among these systems, chemical-free photocatalysis emerges as a cost-effective and sustainable solution for PFOA degradation and potentially other perfluorinated carboxylic acids. This review (I) classifies the state-of-the-art of chemical-free photocatalysts for PFOA degradation in families of materials (Ti, Fe, In, Ga, Bi, Si, and BN), (II) describes the evolution of catalysts, identifies and discusses the strategies to enhance their performance, (III) proposes a simplified cost evaluation tool for simple techno-economical analysis of the materials; (IV) compares the features of the catalysts expanding the classic degradation focus to other essential parameters, and (V) identifies current research gaps and future research opportunities to enhance the photocatalyst performance. We aim that this critical review will assist researchers and practitioners to develop rational photocatalyst designs and identify research gaps for green and effective PFAS degradation.

Photodegradation and photocatalysis of per- and polyfluoroalkyl substances (PFAS): A review of recent progress

Per- and polyfluoroalkyl substances (PFAS) are oxidatively recalcitrant organic synthetic compounds. PFAS are an exceptional group of chemicals that have significant physical characteristics due to the presence of the most electronegative element (i.e., fluorine). PFAS persist in the environment, bioaccumulate, and have been linked to toxicological impacts. Epidemiological and toxicity studies have shown that PFAS pose environmental and health risks, requiring their complete elimination from the environment. Various separation technologies, including adsorption with activated carbon or ion exchange resin; nanofiltration; reverse osmosis; and destruction methods (e.g., sonolysis, thermally induced reduction, and photocatalytic dissociation) have been evaluated to remove PFAS from drinking water supplies. In this review, we will comprehensively summarize previous reports on the photodegradation of PFAS with a special focus on photocatalysis. Additionally, challenges associated with these approaches along with perspectives on the state-of-the-art approaches will be discussed. Finally, the photocatalytic defluorination mechanism of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) following complete mineralization will also be examined in detail.

rh-In2O3 Nanoparticles for Efficient Photocatalytic Degradation of Rifampin

Photodegradation, a widely accepted and promising technology, has gained significant attention for addressing the escalating concerns of environmental deterioration. In this article, rhombohedral corundum-type In2O3 nanocrystals were obtained from the transformation of InOOH via a simple calcining process. Under ultraviolet light irradiation, they showed higher photocatalytic activity in the decomposition of rifampin compared to that of the cubic phase In2O3 and P25-TiO2. Furthermore, the probable pathway and the feasible mechanism for the degradation of rifampin were also deeply explored and discussed.

Research Updates on the Mechanism and Influencing Factors of the Photocatalytic Degradation of Perfluorooctanoic Acid (PFOA) in Water Environments

Perfluorooctanoic acid is ubiquitous in water bodies and is detrimental to the health of organisms. Effectively removing perfluorooctanoic acid (PFOA), a persistent organic pollutant, has been a hot topic around the world. With traditional physical, chemical, and biological methods, it is difficult to effectively and completely remove PFOA, the costs are high, and it is easy to cause secondary pollution. There are difficulties in applying some technologies. Therefore, more efficient and green degradation technologies have been sought. Photochemical degradation has been shown to be a low-cost, efficient, and sustainable technique for PFOA removal from water. Photocatalytic degradation technology offers great potential and prospects for the efficient degradation of PFOA. Most studies on PFOA have been conducted under ideal laboratory conditions at concentrations that are higher than those detected in real wastewater. This paper summarizes the research status of the photo-oxidative degradation of PFOA, and it summarizes the mechanism and kinetics of PFOA degradation in different systems, as well as the influence of key factors on the photo-oxidative degradation and defluoridation process, such as system pH, photocatalyst concentration, etc. PFOA photodegradation technology's existing problems and future work directions are also presented. This review provides a useful reference for future research on PFOA pollution control technology.

A review on superior advanced oxidation and photocatalytic degradation techniques for perfluorooctanoic acid (PFOA) elimination from wastewater

Perfluorooctanoic acid (PFOA) has been identified as the most toxic specie of the family of perfluorinated carboxylic acids (PFCAs). It has been widely distributed and frequently detected in environmental wastewater. The compound's unique features such as inherent stability, rigidity, and resistance to harsh chemical and thermal conditions, due to its multiple and strong C-F bonds have resulted in its resistance to conventional wastewater remediations. Photolysis and bioremediation methods have been proven to be inefficient in their elimination, hence this article presents intensive literature studies and summarized findings reported on the application of advanced oxidation processes (AOPs) and photocatalytic degradation techniques as the best alternatives for the PFOA elimination from wastewater. Techniques of persulfate, photo-Fenton, electrochemical, photoelectrochemical and photocatalytic degradation have been explored and their mechanisms for the degradation and defluorination of the PFOA have been demonstrated. The major advantage of AOPs techniques has been centralized on the generation of active radicals such as sulfate (SO₄^•-) hydroxyl (•OH). While for the photocatalytic process, photogenerated species (electron (e) and holes (h ⁺ _vb)) initiated the process. These active radicals and photogenerated species possessed potentiality to attack the PFOA molecule and caused the cleavage of the C-C and C-F bonds, resulting in its efficient degradation. Shorter-chain PFCAs have been identified as the major intermediates detected and the final stage entails its complete mineralization to carbon dioxide (CO₂) and fluoride ion (F^-). The prospects and challenges associated with the outlined techniques have been highlighted for better understanding of the subject matter for the PFOA elimination from real wastewaters.

Insight into the key role of oxygen dopants over ball-milled boron nitride for efficient degradation of PFOS alternative 6:2 fluorotelomer sulfonic acid

6:2 Fluorotelomer sulfonic acid (6:2 FTS) has been identified as an alternative to perfluorooctane sulfonic acid but has been proven to cause potential threats to humans and the environment. In this study, boron nitride (BN) photocatalysis was explored for 6:2 FTS degradation with 100% removal (k_obs=1.8 h^-1) and desulfurization rate of 100% as well as the defluorination rate of 57.3%. The superior performance of BN was primarily related to oxygen dopants defects (O-dopants). In addition, O-dopants contribution was confirmed by ball-milled BN (B-BN), which introduced more O-dopants and exhibited an increased 6:2 FTS degradation rate of 2.88 h^-1. The decomposition of 6:2 FTS was attributed to holes (h⁺), hydroxyl radicals (•OH), and superoxide (•O₂-) and proceeded via two pathways, the hydrogen abstraction from ethyl carbons by •OH and the C-S bond activation by h⁺ and •OH. To the best of our knowledge, this is the first study demonstrating that h⁺, •OH, and •O₂^- played significant roles in the heterogeneous photocatalytic degradation of 6:2 FTS.

Photocatalysis of aqueous PFOA by common catalysts of In2O3, Ga2O3, TiO2, CeO2 and CdS: influence factors and mechanistic insights

Gallium oxide (Ga₂O₃), titanium dioxide (TiO₂), cerium dioxide (CeO₂), indium oxide (In₂O₃) and cadmium sulfide (CdS) were commonly used under UV light as photocatalysis system for the pollutants' degradation. In this study, these five catalysts were applied for the photodegradation of perfluorooctanoic acid (PFOA), a well-known perfluoroalkyl substance (PFAS). As a result, the PFOA photodegradation performance was sequenced as: Ga₂O₃ > TiO₂ > CeO₂ > In₂O₃ > CdS. To further explain the photocatalysis mechanism, the effects of initial pH, photon energy and band gap were evaluated. The initial pH of 3 ± 0.2 hinders the catalytic reaction of CdS, resulting in low degradation of PFOA, while it has no significant effect on Ga₂O₃, TiO₂, CeO₂ and In₂O₃. In addition, quantum yield was sequenced as TiO₂ > CeO₂ > Ga₂O₃ > In₂O₃, which may not be the main factor determining the degradation effect. Notably, the band gap energy from large to narrow was as: Ga₂O₃ > TiO₂ > CeO₂ > In₂O₃ > CdS, which exactly matched their degradation performance.

Adsorption of persistent organic pollutants (POPs) from the aqueous environment by nano-adsorbents: A review

The intensification of urbanisation and industrial activities significantly exacerbates the distribution of toxic contaminations into the aqueous environment. Persistent organic pollutants (POPs) have received considerable attention in the past few decades because of their persistence, long-distance migration, potential bioaccumulation, latent toxicity for humans and wildlife. There is no doubt that POPs cause serious effects on the global ecosystem. Therefore, it is necessary to develop a simple, safe and sustainable approach to remove POPs from water bodies. Among other conventional techniques, the adsorption process has proven to be a more effective method for eliminating POPs and to a larger extent meet discharge regulations. Nanomaterials can effectively adsorb POPs from aqueous solutions. For most POPs, a >70% adsorptive removal efficiency was achieved. The major mechanisms for POPS uptake by nano-adsorbents includes electrostatic interaction, hydrophobic (van der Waals, π-π and electron donor-acceptor) interaction and hydrogen bonding. Nano-adsorbent can sustain a >90% POPs adsorptive removal for about 3 cycles and reuseable for up to 10 cycles. Challenges around adsorbent ecotoxicity and safe disposal were also discussed. The present review evaluated recent research outcomes on nanomaterials that are employed to remove POPs in water systems.

Removal of PFASs from water by carbon-based composite photocatalysis with adsorption and catalytic properties: A review

Per- and polyfluoroalkyl substances (PFASs) are a class of persistent organic pollutants widely distributed in aquatic environments. The adsorption and photocatalytic methods have been widely used to remove PFASs in water because of their respective advantages. Still, they have apparent defects when used alone. Therefore, the adsorption and photocatalytic technologies are combined through suitable preparation methods, and the excellent properties of the two are used to synergize the treatment of organic pollutants. This strategy of "concentrating" pollutants and then degrading them in a centralized manner plays an essential role in removing trace PFASs. Nevertheless, a review focusing on this kind of adsorption photocatalyst system is lacking. This review will fill this gap and provide a reference for developing a carbon-based composite photocatalyst. Firstly, different carbon-based composite photocatalysts are reviewed in detail, focusing on the differences in various composite materials' excellent adsorption and catalytic properties. Secondly, the factors influencing the removal effect of carbon-based composite photocatalysts are discussed. Thirdly, the removal mechanism of carbon-based composite photocatalysts is summarized in detail. The removal process involves two steps: adsorption and photodegradation. The adsorption process involves multiple cooperative adsorption mechanisms, and photocatalytic degradation includes oxidative and reductive degradation. Fourthly, the comparison of adsorption-photocatalysis with common treatment techniques (including removal rate, range of adaptation, cost, and the possibility of expanding application) is summarized. Finally, the prospects of carbon-based composite photocatalysts for repairing PFASs are given by evaluating the performance of different composites.

Facile Synthesis and Environmental Applications of Noble Metal-Based Catalytic Membrane Reactors

Noble metal nanoparticle-loaded catalytic membrane reactors (CMRs) have emerged as a promising method for water decontamination. In this study, we proposed a convenient and green strategy to prepare gold nanoparticle (Au NPs)-loaded CMRs. First, the redox-active substrate membrane (CNT-MoS2) composed of carbon nanotube (CNT) and molybdenum disulfide (MoS2) was prepared by an impregnation method. Water-diluted Au(III) precursor (HAuCl4) was then spontaneously adsorbed on the CNT-MoS2 membrane only through filtration and reduced into Au(0) nanoparticles in situ, which involved a “adsorption–reduction” process between Au(III) and MoS2. The constructed CNT-MoS2@Au membrane demonstrated excellent catalytic activity and stability, where a complete 4-nitrophenol transformation can be obtained within a hydraulic residence time of <3.0 s. In addition, thanks to the electroactivity of CNT networks, the as-designed CMR could also be applied to the electrocatalytic reduction of bromate (>90%) at an applied voltage of −1 V. More importantly, by changing the precursors, one could further obtain the other noble metal-based CMR (e.g., CNT-MoS2@Pd) with superior (electro)catalytic activity. This study provided new insights for the rational design of high-performance CMRs toward various environmental applications.

Concentrate and degrade PFOA with a photo-regenerable composite of In-doped TNTs@AC

"Concentrate-and-degrade" is an effective strategy to promote mass transfer and degradation of pollutants in photocatalytic systems, yet suitable and cost-effective photocatalysts are required to practice the new concept. In this study, we doped a post-transition metal of Indium (In) on a novel composite adsorptive photocatalyst, activated carbon-supported titanate nanotubes (TNTs@AC), to effectively degrade perfluorooctanoic acid (PFOA). In/TNTs@AC exhibited both excellent PFOA adsorption (>99% in 30 min) and photodegradation (>99% in 4 h) under optimal conditions (25 °C, pH 7, 1 atm, 1 g/L catalyst, 0.1 mg/L PFOA, 254 nm). The heterojunction structure of the composite facilitated a cooperative adsorption mode of PFOA, i.e., binding of the carboxylic head group of PFOA to the metal oxide and attachment of the hydrophobic tail to AC. The resulting side-on adsorption mode facilitates the electron (e^‒) transfer from the carboxylic head to the photogenerated hole (h⁺), which was the major oxidant verified by scavenger tests. Furthermore, the presence of In enables direct electron transfer and facilitates the subsequent stepwise defluorination. Finally, In/TNTs@AC was amenable to repeated uses in four consecutive adsorption-photodegradation runs. The findings showed that adsorptive photocatalysts can be prepared by hybridization of carbon and photoactive semiconductors and the enabled "concentrate-and-degrade" strategy is promising for the removal and degradation of trace levels of PFOA from polluted waters.

Recent progress and challenges on the removal of per- and poly-fluoroalkyl substances (PFAS) from contaminated soil and water

Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.

Design of nanomaterials for the removal of per- and poly-fluoroalkyl substances (PFAS) in water: Strategies, mechanisms, challenges, and opportunities

Due to their persistent and pervasive distribution and their adverse effects on human health, the removal of per- and polyfluoroalkyl substances (PFAS) from the environment has been the focus of current research. Recent studies have shown that engineered nanomaterials provide great opportunities for their removal by chemical, physical and electrochemical adsorption methods, or as photo- or electrocatalysts that promote their degradation. This review summarizes and discusses the performance of recently reported nanomaterials towards PFAS removal in water treatment applications. We discuss the performance, mechanisms, and PFAS removal conditions of a variety of nanomaterials, including carbon-based, non-metal, single-metal, and multi-metal nanomaterials. We show that nanotechnology provides significant opportunities for PFAS remediation and further nanomaterial development can provide solutions for the removal of PFAS from the environment. We also provide an overview of the current challenges.

Emerging technologies for PFOS/PFOA degradation and removal: A review

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) are highly recalcitrant anthropogenic chemicals that are ubiquitously present in the environment and are harmful to humans. Typical water and wastewater treatment processes (coagulation, flocculation, sedimentation, and filtration) are proven to be largely ineffective, while adsorption with granular activated carbon (GAC) has been the chief option to capture them from aqueous sources followed by incineration. However, this process is time-consuming, and produces additional solid waste and air pollution. Treatment methods for PFOS and PFOA generally follow two routes: (1) removal from source and reduce the risk; (2) degradation. Emerging technologies focusing on degradation are critically reviewed in this contribution. Various processes such as bioremediation, electrocoagulation, foam fractionation, sonolysis, photocatalysis, mechanochemical, electrochemical degradation, beams of electron and plasma have been developed and studied in the past decade to address PFAS crisis. The underlying mechanisms of these PFAS degradation methods have been categorized. Two main challenges have been identified, namely complexity in large scale operation and the release of toxic byproducts. Based on the literature survey, we have provided a strength-weakness-opportunity-threat (SWOT) analysis and quantitative rating on their efficiency, environmental impact and technology readiness.

Application of Hydrothermal Alkaline Treatment for Destruction of Per- and Polyfluoroalkyl Substances in Contaminated Groundwater and Soil

Hydrothermal alkaline treatment (HALT) can effectively degrade per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foam (AFFF). However, information is lacking regarding the treatment of PFASs in actual groundwater and soil from AFFF-impacted sites, especially for complex soil matrices. Given the lack of studies on direct soil treatment for PFAS destruction, we herein applied HALT to two groundwater samples and three soil samples from AFFF-impacted sites and characterized the destruction of PFASs using high-resolution mass spectrometry. Results showed that the 148 PFASs identified in all collected field samples, including 10 cationic, 98 anionic, and 40 zwitterionic PFASs, were mostly degraded to nondetectable levels within 90 min when treated with 5 M NaOH at 350 °C. The near-complete defluorination, as evidenced by fluoride release measurements, confirmed the complete destruction of PFASs. While many structures, including perfluoroalkyl carboxylic acids and polyfluorinated substances, were readily degraded, perfluoroalkyl sulfonates (PFSAs, C_nF_2n+1-SO₃^-), most notably with short chain lengths (n = 3-5), were more recalcitrant. Rates of PFSA destruction in groundwater samples were similar to those measured in laboratory water solutions, but reactions in soil were slow, presumably due to base-neutralizing properties of the soil. Further, the degradation of PFASs in groundwaters and soils was found to be a function of reaction temperature, NaOH concentration, and reaction time. These findings have important implications for the remediation of AFFF-impacted sites.

Degradation of perfluoroalkyl substances using UV/Fe0 system with and without the presence of oxygen

The wide presence of per- and poly-fluoroalkyl substances (PFAS) in the environment is a global concern, thus their degradation is an imminent task. In this study, oxidative and/or reductive degradation of three representative PFAS - perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluorooctane sulfonate (PFOS) was achieved using nanoscale zero-valent iron (Fe⁰ NPs) under ultraviolet (UV) light, both with and without the presence of oxygen. Higher degradation and defluorination rates were obtained for a longer chain PFNA compared to PFOA, and a higher removal of PFAS was achieved without the presence of O₂ compared to that with O₂. The degradation followed first-order reaction kinetics, and obtained the highest rates of 97.6, >99.9, and 98.5% without the presence of O₂ for PFOA, PFNA, and PFOS, respectively. The degradation rates increased with an increase in the nanoparticle concentrations in the range of 1-100 mg/L. In addition to fluoride ions, shorter chain perfluorocarboxylic acids (PFCAs) were detected as the main intermediates during PFAS degradation; PFHpS and 6:2 FTS were also detected during PFOS degradation. Hydroxyl radicals (·OH) and superoxide radicals (·O₂^-) were not involved in the degradation of PFOA, but likely involved in the degradation of PFOS. Emerging contaminants PFAS degradation using the UV/Fe⁰ system is a cost-effective technology owing to the low cost and recyclability of Fe⁰ nanomaterials, low energy consumption in the system, and its capability to degrade PFAS both with and without the presence of oxygen. This technology can be potentially applied to treat PFAS-contaminated waters in the environment.

Effective Breaking of the Fluorocarbon Chain by the Interface Bi2O2X···PFOA Complex Strategy via Coordinated Se on Construction of the Internal Photogenerated Carrier Pathway

The destruction of perfluorooctanoic acid (PFOA) from outside was inhibited by the "barrel spiral" barrier, but the construction of the photocatalyst-PFOA complex provided a direct attack on photogenerated reactive species (RSs). Here, we investigated the bridging ability of bismuth oxychalcogenide (Bi₂O₂X) for constructing an effective photocarrier pathway to PFOA. The experimental results and DFT calculations showed that a more intense internal access of Bi₂O₂Se was built via the terminal carboxylate tail, and the weaker electrostatic interaction of Bi-Se bonds helped realize the smaller band gap and slower recombination of photocarriers, thereby inhibiting the invalid annihilation of holes with H₂O and facilitating the transformation of electrons to O₂^-•. The pseudo-first-order rate coefficient (k_obs) was 2 and 4 times higher than Bi₂O₂S and TiO₂, respectively, showing the outstanding photocatalytic activity of Bi₂O₂Se. A broad pH (4-8) adaptability of Bi₂O₂Se was observed for defluorination, especially in alkali condition. This new understanding may inspire the development of Se-coordinated catalysts.

Occurrence and removal of poly/perfluoroalkyl substances (PFAS) in municipal and industrial wastewater treatment plants

The presence of poly- and perfluoroalkyl substances (PFAS) has caused serious problems for drinking water supplies especially at intake locations close to PFAS manufacturing facilities, wastewater treatment plants (WWTPs), and sites where PFAS-containing firefighting foam was regularly used. Although monitoring is increasing, knowledge on PFAS occurrences particularly in municipal and industrial effluents is still relatively low. Even though the production of C8-based PFAS has been phased out, they are still being detected at many WWTPs. Emerging PFAS such as GenX and F-53B are also beginning to be reported in aquatic environments. This paper presents a broad review and discussion on the occurrence of PFAS in municipal and industrial wastewater which appear to be their main sources. Carbon adsorption and ion exchange are currently used treatment technologies for PFAS removal. However, these methods have been reported to be ineffective for the removal of short-chain PFAS. Several pioneering treatment technologies, such as electrooxidation, ultrasound, and plasma have been reported for PFAS degradation. Nevertheless, in-depth research should be performed for the applicability of emerging technologies for real-world applications. This paper examines different technologies and helps to understand the research needs to improve the development of treatment processes for PFAS in wastewater streams.

Remediation and mineralization processes for per- and polyfluoroalkyl substances (PFAS) in water: A review

Per- and polyfluoroalkyl substances (PFAS) are synthetic organic molecules used to manufacture various consumer and industrials products. In PFAS, the CF bond is stable, which renders these compounds chemically stable and prevents their breakdown. Several PFAS treatment processes such as adsorption, photolysis and photocatalysis, bioremediation, sonolysis, electrochemical oxidation, etc., have been explored and are being developed. The present review article has critically summarized degradative technologies and provides in-depth knowledge of photodegradation, electrochemical degradation, chemical oxidation, and reduction mineralization mechanism. Also, novel non-degradative technologies, including nano-adsorbents, natural and surface-modified clay minerals/zeolites, calixarene-based polymers, and molecularly imprinted polymers and adsorbents derived from biomaterials are discussed in detail. Of these novel approaches photocatalysis combined with membrane filtration or electrochemical oxidation via a treatment train approach shows promising results in removing PFAS in natural waters. The photocatalytic mineralization mechanism of PFOA is discussed, leading to recommendations for future research on novel remediation strategies for removing PFAS from water.

Light-Induced Advanced Oxidation Processes as PFAS Remediation Methods: A Review

PFAS substances, which have been under investigation in recent years, are certainly some of the most critical emerging contaminants. Their presence in drinking water, correlated with diseases, is consistently being confirmed by scientific studies in the academic and health sectors. With the aim of developing new technologies to mitigate the water contamination problem, research activity based on advanced oxidation processes for PFAS dealkylation and subsequent mineralization is active. While UV radiation could be directly employed for decontamination, there are nevertheless considerable problems regarding its use, even from a large-scale perspective. In contrast, the use of cheap, robust, and green photocatalytic materials active under near UV-visible radiation shows interesting prospects. In this paper we take stock of the health problems related to PFAS, and then provide an update on strategies based on the use of photocatalysts and the latest findings regarding reaction mechanisms. Finally, we detail some brief considerations in relation to the economic aspects of possible solutions.

Molecular-Level Insights on the Facet-Dependent Degradation of Perfluorooctanoic Acid

Perfluorooctanoic acid (PFOA) has raised significant health concerns due to its high ecotoxicological risks and difficulties in removal by conventional water treatment process. Previous studies have demonstrated that photocatalytic techniques exhibit great potential in PFOA removal. However, the underlying mechanism of the degradation process has not been fully understood, particularly the contribution of the facet effects of catalysts. In this study, a combination of experiments and first-principles calculations were conducted to shed light on the facet-dependence of the interfacial interactions and oxidation during the PFOA degradation process. We proved that the interfacial interaction was essential in initiating the hole-dominated degradation process, and the {110}_R3̅c facet of hexagonal In₂O₃ features the strongest interaction with PFOA. The overall defluorination rate was mainly controlled by the hole-dominated oxidation processes under UV irradiation, which were further attributed to the electronic structures and reaction site distributions of different In₂O₃ surfaces. This study provides molecular-level insights on the facet-dependent PFOA catalytic degradation process, which can guide the rational design of photocatalysts to achieve superior decontamination efficiency.

Novel magnetically retrievable In2O3/MoS2/Fe3O4 nanocomposite materials for enhanced photocatalytic performance

The current work involves synthesis of hybrid nanomaterial of In2O3/MoS2/Fe3O4 and their applications as photocatalysts for disintegration of esomeprazole under visible light illumination. The data emerged from various analyses testified to the successful construction of the desired nano-scaled hybrid photocatalyst. Tauc plot gave the band gap of In2O3/MoS2/Fe3O4 to be ~ 2.15 eV. Synergistic effects of the integrant components enabled efficacious photocatalytic performances of the nanocomposite. The nanohybrid photocatalyst In2O3/MoS2/Fe3O4 showed photodecomposition up to ~ 92.92% within 50 min. The current work realizes its objective of constructing metal oxide based hybrid nano-photocatalyst supported on MoS2 sheets for activity in the visible spectrum, which displayed remarkable capacity of disintegrating emerging persistent organic contaminants and are magnetically recoverable.

Hydrothermal Alkaline Treatment for Destruction of Per- and Polyfluoroalkyl Substances in Aqueous Film-Forming Foam

The widespread use of aqueous film-forming foam (AFFF) for firefighting activities (e.g., fire training to extinguish fuel-based fires at aircraft facilities) has led to extensive groundwater and soil contamination by per- and polyfluoroalkyl substances (PFASs) that are highly recalcitrant to destruction using conventional treatment technologies. This study reports on the hydrothermal alkaline treatment of diverse PFASs present in AFFFs. Quantitative and semiquantitative high-resolution mass spectrometry analyses of PFASs demonstrate a rapid degradation of all 109 PFASs identified in two AFFFs (sulfonate- and fluorotelomer-based formulations) in water amended with an alkali (e.g., 1-5 M NaOH) at near-critical temperature and pressure (350 °C, 16.5 MPa). This includes per- and polyfluoroalkyl acids and a range of acid precursors. Most PFASs were degraded to nondetectable levels within 15 min, and the most recalcitrant perfluoroalkyl sulfonates were degraded within 30 min when treated with 5 M NaOH. ¹⁹F NMR spectroscopic analysis and fluoride ion analysis confirm the near-complete defluorination of PFASs in both dilute and concentrated AFFF mixtures, and no stable volatile organofluorine species were detected in reactor headspace gases by the gas chromatography-mass spectrometry analysis. These findings indicate a significant potential for application of hydrothermal treatment technologies to manage PFAS waste streams, including on-site treatment of unused AFFF chemical stockpiles, investigation-derived wastes, and concentrated source zone materials.

Catalysis on Nanostructured Indium Tin Oxide Surface for Fast and Inexpensive Probing of Antibodies during Pandemics

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a global threat to human health and the economy. Society needs inexpensive, fast, and accurate quantitative diagnostic tools. Here, we report a new approach using a solid-state biosensor to measure antibodies, which does not require functionalization, unlike conventional biosensors. A nanostructured semiconductor surface with catalytic properties was used as a transducer for rapid immobilization and measurement of the antibody. The transducer response was based on solid-state electronics properties. The changes on the surface of the semiconductor induced changes in the direct current (DC) surface resistivity. This was a result of a catalytic chemical reaction on that surface. This new low-cost approach reduced the response time of the measurement significantly, and it required only a very small amount of sample on the microliter scale.

Transition metal ion-doped In2O3 nanocubes: investigation of their photocatalytic degradation activity under sunlight

The objective of this work was to study the effect of transition metal ion doping (1 wt% of Mn, Fe, Co, Ni, and Cu) in indium oxide (In₂O₃) on its photocatalytic activity to degrade organic dyes, which are considered potential environment pollutants. The transition metal ion-doped In₂O₃ nanocube photocatalyst was prepared via the hydrothermal method. After understanding the thermal behavior of the as-prepared sample (In(OH)₃), it was calcined at 400 °C for 3 h to obtain In₂O₃. The In₂O₃ was systematically investigated via FESEM, X-ray diffraction, Raman spectroscopy and UV-vis absorption analysis. Microstructure analysis by FESEM showed that the In₂O₃ was formed as nanocubes. These nanocubes were formed in a single phase with a cubic crystal structure, while their crystallite size increased from 11 nm to 19 nm when doped with 1 wt% of transition metals, including Mn, Fe, Co, Ni and Cu. The band gap energy for pure In₂O₃ was determined to be 3 eV, and that for the metal ion-doped In₂O₃ showed a slight decrease to the lowest value of 2.94 eV. The photoluminescence (PL) decay lifetime was found to be in the range of 28.56 ns to 33.89 ns. Photocatalytic experiments were conducted for the degradation of methylene blue (MB) dye under sunlight irradiation in the presence of the In₂O₃ nanocubes. Among the five metal ion-doped samples, the Ni ion-doped In₂O₃ photocatalyst exhibited the highest degradation efficiency of 98% in 270 min of sunlight exposure. The high performance of Ni-In₂O₃ is due to its highest PL lifetime of 33.89 ns. The complete route for the degradation of MB dye was revealed by identifying the intermediates.

Decomposition of highly persistent perfluorooctanoic acid by hollow Bi/BiOI1-xFx: Synergistic effects of surface plasmon resonance and modified band structures

Perfluorooctanoic acid (PFOA) is highly stable due to the strong CF bond and extremely difficult to be removed by conventional photocatalysts. In this study, Bi doped BiOI_1-xF_x solid solutions with hollow microsphere structure were prepared through a facile one-step hydrothermal method. Compared with pure BiOI and BiOF, the band gap of the Bi/BiOI_1-xF_x solid solutions was significantly reduced, thus promoting the visible light absorbance. The cavity structure of the BiOI_1-xF_x solid solutions enhanced the surface areas and active sites for reaction. The local electromagnetic field dominated by surface plasmon resonance (SPR) effect of Bi metal on the surface favored the separation of the photoinduced charge pairs. As a consequence, Bi/BiOI_0.8F_0.2 (x = 0.20, the doping amount of fluorine was 20 %) composite displayed the best photocatalytic performance for decomposing PFOA, and 40 mg/L PFOA could be removed within 2 h illumination. The degradation rate constant (k = 0.0375 min^-1) of PFOA by Bi/BiOI_0.8F_0.2 was about tenfold of that by pure BiOI and BiOF. Superoxide radical (·O₂-) predominated in the degradation of PFOA by Bi/BiOI_0.8F_0.2, and the possible degradation pathway of PFOA by Bi/BiOI_0.8F_0.2 was proposed. This work provides a highly efficient catalyst for the practical application in removal of highly persistent PFOA.

Photo enhanced degradation of polyfluoroalkyl and perfluoroalkyl substances

The increase in the presence of highly recalcitrant poly- and per- fluoroalkyl substances (PFAS) in the environment, plant tissues and animals continues to pose serious health concerns. Several treatment methods such as physical, biological and chemical processes have been explored to deal with these compounds. Current trends have shown that the destructive treatment processes, which offer degradation and mineralization of PFASs, are the most desirable process among researchers and policy makers. This article, therefore, reviews the degradation and defluorination processes, their efficiencies and the degradation mechanism of photon-based processes. It shows that high degradation and defluorination efficiency of PFASs could be achieved by photon driven processes such as photolysis, photochemical, photocatalysis and photoreduction. The efficiency of these processes is greatly influenced by the nature of light and the reactive radical generated in the system. The limitation of these processes, however, include the long reaction time required and the use of anoxic reaction conditions, which are not obtainable at ambient conditions.

Photochemical decomposition of perfluorochemicals in contaminated water

Perfluorochemicals (PFCs) are a set of chemicals containing C-F bonds, which are concerned due to their bioaccumulation property, persistent and toxicological properties. Photocatalytic approaches have been widely studied for the effective removal of PFCs due to the mild operation conditions. This review aims to provide a comprehensive and up-to-date summary on the homogenous and heterogeneous photocatalytic processes for PFCs removal. Specifically, the homogenous photocatalytic methods for remediating PFCs are firstly discussed, including generation of hydrated electrons (e_aq^‒) and its performance and mechanisms for photo-reductive destruction of PFCs, the active species responsible for photo-oxidative degradation of PFCs and the corresponding mechanisms, and metal-ion-mediated (Fe(III) mainly used) processes for the remediation of PFCs. The influences of molecular structures of PFCs and water matrix, such as dissolved oxygen, humic acid, nitrate, chloride on the homogenous photocatalytic degradation of PFCs are also discussed. For heterogeneous photocatalytic processes, various semiconductor photocatalysts used for the decomposition of perfluorooctanoic acid (PFOA) are then discussed in terms of their specific properties benefiting photocatalytic performances. The preparation methods for optimizing the performance of photocatalysts are also overviewed. Moreover, the photo-oxidative and photo-reductive pathways are summarized for remediating PFOA in the presences of different semiconductor photocatalysts, including active species responsible for the degradation. We finally put forward several key perspectives for the photocatalytic removal of PFCs to promote its practical application in PFCs-containing wastewater treatment, including the treatment of PFCs degradation products such as fluoride ion, and the development of noble-metal free photocatalysts that could efficiently remove PFCs under solar light irradiation.

A concentrate-and-destroy technique for degradation of perfluorooctanoic acid in water using a new adsorptive photocatalyst

Per- and polyfluoroalkyl substances (PFAS) have emerged as a major concern in aquatic systems worldwide due to their widespread applications and health concerns. Perfluorooctanoic acid (PFOA) is one of the most-detected PFAS. Yet, a cost-effective technology has been lacking for the degradation of PFAS due to their resistance to conventional treatment processes. To address this challenge, we prepared a novel adsorptive photocatalyst, referred to Fe/TNTs@AC, based on low-cost commercial activated carbon (AC) and TiO₂. The composite material exhibited synergistic adsorption and photocatalytic activity and enabled a novel "concentrate-&-destroy" strategy for rapid and complete degradation of PFOA in water. Fe/TNTs@AC was able to adsorb PFOA within a few minutes, thereby effectively concentrating the target contaminant on the photoactive sites. Subsequently, Fe/TNTs@AC was able to degrade >90% of PFOA that was preconcentrated on the solid in 4 h under UV irradiation (254 nm, 21 mW cm^‒2), of which 62% was completely mineralized to F^-. The efficient photodegradation also regenerated Fe/TNTs@AC, eliminating the need for expensive chemical regenerants, and after six cycles of adsorption/photodegradation, the material showed no significant drop in adsorption capacity or photocatalytic activity. Simulations based on the density functional theory (DFT) revealed that Fe/TNTs@AC adsorbs PFOA in the side-on parallel mode, facilitating the subsequent photocatalytic degradation of PFOA. According to the DFT analysis, scavenger tests, and analysis of degradation intermediates, PFOA decomposition is initiated by direct hole oxidation, which activates the molecule and leads to a series of decarboxylation, C-F bond cleavage, and chain shortening reactions. The innovative "concentrate-&-destroy" strategy may significantly advance conventional adsorption or photochemical treatment of PFAS-contaminated water and holds the potential to degrade PFOA, and potentially other PFAS, more cost-effectively.

Recent advances in the removal of persistent organic pollutants (POPs) using multifunctional materials:a review

Persistent organic pollutants (POPs) have gained heightened attentions in recent years owing to their persistent property and hazard influence on wild life and human beings. Removal of POPs using varieties of multifunctional materials have shown a promising prospect compared with conventional treatments. Herein, three main categories, including thermal degradation, electrochemical remediation, as well as photocatalytic degradation with the use of diverse catalytic materials, especially the recently developed prominent ones were comprehensively reviewed. Kinetic analysis and underlying mechanism for various POPs degradation processes were addressed in detail. The review also systematically documented how catalytic performance was dramatically affected by the nature of the material itself, the structure of target pollutants, reaction conditions and treatment techniques. Moreover, the future challenges and prospects of POPs degradation by means of multiple multifunctional materials were outlined accordingly. Knowing this is of immense significance to enhance our understanding of POPs remediation procedures and promote the development of novel multifunctional materials.

Environmental factors affecting degradation of perfluorooctanoic acid (PFOA) by In2O3 nanoparticles

Nanophotocatalysts have shown great potential for degrading poly- and perfluorinated substances (PFAS). In light of the fact that most of these catalysts were studied in pure water, this study was designed to elucidate effects from common environmental factors on decomposing and defluorinating perfluorooctanoic acid (PFOA) by In₂O₃ nanoparticles. Results from this work demonstrated that among the seven parameters, pH, sulfate, chloride, H₂O₂, In₂O₃ dose, NOM and O₂, the first four had statistically significant negative effects on PFOA degradation. Since PFOA is a strong acid, the best condition leading to the highest PFOA removal was identified for two pH ranges. When pH was between 4 and 8, the optimal condition was: pH = 4.2; sulfate = 5.00 mg/L; chloride = 20.43 mg/L; H₂O₂ = 0 mmol/L. Under this condition, PFOA decomposition and defluorination were 55.22 and 23.56%, respectively. When pH was between 2 and 6, the optimal condition was: pH = 2; sulfate = 5.00 mg/L; chloride = 27.31 mg/L; H₂O₂ = 0 mmol/L. With this condition, the modeled PFOA decomposition was 97.59% with a defluorination of approximately 100%. These predicted results were all confirmed by experimental data. Thus, In₂O₃ nanoparticles can be used for degrading PFOA in aqueous solutions. This approach works best when the target contaminated water contains low concentrations of NOM, sulfate and chloride and at a low pH.

Facile fabrication of silver iodide/graphitic carbon nitride nanocomposites by notable photo-catalytic performance through sunlight and antimicrobial activity

Silver iodide/graphitic carbon nitride nanocomposites have been successfully fabricated through sonication-assisted deposition-precipitation route at room temperature and hydrothermal method. Varied mass ratios and preparation processes can modify the structure, purity, shape, and scale of specimens. The purity of the product was confirmed by Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray crystallography. The morphology and size of specimens could be observed with transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The bandgap was evaluated around 2.82 eV for pure g-C₃N₄. The bandgap has reduced to 2.70 eV by increasing the quantity of silver iodide in the nanocomposites. The photocatalytic activity of AgI/C₃N₄ has been studied over the destruction of rhodamine B (RhB) and methyl orange (MO) through visible radiation due to their suitable bandgap. The as-prepared AgI/C₃N₄ nanocomposites photocatalyst revealed better photocatalytic behavior than the genuine AgI and C₃N₄ which ascribed to synergic impacts at the interconnection of C₃N₄ and AgI. Furthermore, these nanocomposites have great potential for being a great antibacterial agent.

Improved photocatalysis of perfluorooctanoic acid in water and wastewater by Ga2O3/UV system assisted by peroxymonosulfate

Perfluorooctanoic acid (PFOA) has attracted considerable attention worldwide due to its widespread occurrence and environmental impacts. This research focused on the photocatalytic process for the treatment of PFOA in water and wastewater. Gallium oxide (Ga₂O₃) and peroxymonosulfate (PMS) were mixed directly in PFOA solution, which was irradiated under different light sources. The treatment system showed excellent performance that 100% PFOA was degraded within 90 min and 60 min under 254 nm and 185 nm UV irradiation, respectively. Moreover, the degradation efficacy was unaffected by initial PFOA concentration from 50 ng L^-1 to 50 mg L^-1. Acidic solution (pH 3) improved the degradation process. The quantum yield in the PMS/Ga₂O₃ system under UV light (254 nm) was estimated to be 0.009 mol E^-1. Scavengers such as tert-butanol (t-BuOH), disodium ethylenediaminetetraacetate (EDTA-Na₂) and benzoquinone (BQ) were added into PFOA solution to prove that sulfate radicals (SO₄^•-), superoxide radical (O₂^•-) and photogenerated electrons (e^-) were the main active species with strong redox ability for PFOA degradation in PMS/Ga₂O₃/UV system. Combined with the intermediates analysis, PFOA was degraded stepwise from long chain compound to shorter chain intermediates. In addition, PFOA in real wastewater exhibited similar degradation efficiency, together with 75-85% TOC removal by Ga₂O₃/PMS under 254 nm UV irradiation. Therefore, Ga₂O₃/PMS system was highly effective for PFOA photodegradation under UV irradiation, which has potential to be applied for the perfluoroalkyl substances (PFAS) treatment in water and wastewater.

Research progress on the removal of hazardous perfluorochemicals: A review

Perfluorinated substances are global and ubiquitous pollutants. The persistent organic pollution of perfluorochemicals (PFCs) have drawn attentions worldwide. In view of the current need for sustainable development, many researchers began to study the remediation techniques for PFCs. Due to its unique hydrophobic and oil-phobic characteristics, the requirements for the PFCs removal process are different, so that their remediation techniques are still under continuous exploration. Hence, this review summarized the removal behaviors of various PFCs on different materials which supply a good foundation for future investigations in this field. It is evident from previous literature that every remediation techniques for PFCs has its own advantages. Among various currently evaluated removal methods, adsorption seems to be one of the most commonly used and recognized techniques for PFCs pollution control. Other innovative and promising techniques, such as physical and/or chemical methods, have also been tested for their effectiveness in removing perfluorinated compounds.

Photocatalytic defluorination of perfluorooctanoic acid by surface defective BiOCl: Fast microwave solvothermal synthesis and photocatalytic mechanisms

There is an urgent need for developing cost-effective methods for the treatment of perfluorooctanoic acid (PFOA) due to its global emergence and potential risks. In this study, taking surface-defective BiOCl as an example, a strategy of surface oxygen vacancy modulation was used to promote the photocatalytic defluorination efficiency of PFOA under simulated sunlight irradiation. The defective BiOCl was fabricated by a fast microwave solvothermal method, which was found to induce more surface oxygen vacancies than conventional solvothermal and precipitation methods. As a result, the as-prepared BiOCl showed significantly enhanced defluorination efficiency, which was 2.7 and 33.8 times higher than that of BiOCl fabricated by conventional solvothermal and precipitation methods, respectively. Mechanistic studies indicated that the defluorination of PFOA follows a direct hole (h⁺) oxidation pathway with the aid of •OH, while the oxygen vacancies not only promote charge separation but also facilitate the intimate contact between the photocatalyst surface and PFOA by coordinating with its terminal carboxylate group in a bidentate or bridging mode. This work will provide a general strategy of oxygen vacancy modulation by microwave-assisted methods for efficient photocatalytic defluorination of PFOA in the environment using sunlight as the energy source.

Perfluorooctanoic acid exposure induces apoptosis in SMMC-7721 hepatocellular cancer cells

To better understand the toxicological activities of perfluorooctanoic acid (PFOA), we examined the effects of PFOA on apoptosis and its molecular mechanism in SMMC-7721 hepatoma cells. Cell viability was evaluated by MTT assay and apoptosis was determined by flow cytometry. Western blot and quantitative real-time PCR were used to examine the protein and gene expressions of Bax and Bcl-2. Our results showed that PFOA inhibited SMMC-7721 cell growth and induced apoptosis. PFOA treatment increased Bax expression and increased Bcl-2 expression at both gene and protein levels. Our study demonstrated that PFOA had toxic effects on SMMC-7721 cells, such as inhibiting cell proliferation and inducing apoptosis. Furthermore, we showed that PFOA-mediated induction of apoptosis involved inducing Bax and decreasing Bcl-2 expression as a molecular mechanism of its toxicological effects.

Nanotechnology in remediation of water contaminated by poly- and perfluoroalkyl substances: A review

This article gives an overview of nanotechnologies applied in remediation of water contaminated by poly- and perfluoroalkyl substances (PFASs). The use of engineered nanomaterials (ENMs) in physical sorption and photochemical reactions offers a promising solution in PFAS removal because of the high surface area and the associated high reactivities of the ENMs. Modification of carbon nanotubes (CNTs) (e.g., oxidation, applying electrochemical assistance) significantly improves their adsorption rate and capacity for PFASs removal and opens a new door for use of CNTs in environmental remediation. Modified nanosized iron oxides with high adsorption capacity and magnetic property have also been demonstrated to be ideal sorbents for PFASs with great recyclability and thus provide an excellent alternative for PFAS removal under various conditions. Literature shows that PFOA, which is one of the most common PFASs detected at contaminated sites, can be effectively decomposed in the presence of either TiO₂-based, Ga₂O₃-based, or In₂O₃-based nano-photocatalysts under UV irradiation. The decomposition abilities and mechanisms of different nano-photocatalysts are reviewed and compared in this paper. Particularly, the nanosized In₂O₃ photocatalysts have the best potential in PFOA decomposition and the decomposition performance is closely related to the specific surface area and the amount of photogenerated holes on the surfaces of In₂O₃ nanostructures. In addition to detailed review of the published studies, future prospects of using nanotechnology for PFAS remediation are also discussed in this article.