Optimized removal of antibiotic drugs from aqueous solutions using single, double and multi-walled carbon nanotubes

Polydopamine coating for enhanced electrostatic adsorption of methylene blue by multiwalled carbon nanotubes in alkaline environments

The removal of dye molecules in alkaline environments is an issue that should receive increased attention. In this study, the interaction mechanism between polydopamine-modified multiwalled carbon nanotubes (P-MWCNTs) and multiwalled carbon nanotubes (MWCNTs) with the cationic dye methylene blue (MB) in alkaline environments was explained in depth by adsorption, spectroscopy, and density functional theory (DFT). The mechanism of action and dominant forces between the adsorbent and adsorbate were analyzed graphically by introducing energy decomposition analysis (EDA) and an independent gradient model (IGM) into the DFT calculations. In addition, the force distribution was investigated through an isosurface. Moreover, batch adsorption studies were conducted to evaluate the performance of MWCNTs and P-MWCNTs for MB removal in alkaline environments. The maximum MB adsorption capacities of the MWCNTs and P-MWCNTs in solution were 113.3 mg‧g-1 and 230.4 mg‧g-1, respectively, at pH 9. The IGM and EDA showed that the better adsorption capacity of the P-MWCNTs originated from the enhancement of the electrostatic effect by the proton dissociation of polydopamine. Moreover, the adsorption of MB by MWCNTs and P-MWCNTs in alkaline environments was governed by dispersion and electrostatic effects, respectively. Through this study, it is hoped that progress will be made in the use of DFT to explore the mechanism of adsorbent-adsorbate interactions.

Optimizing removal of antiretroviral drugs from tertiary wastewater using chlorination and AI-based prediction with response surface methodology

Chemical and pharmaceutical chemicals found in water sources create substantial risks to human health and the environment. The presence of pharmaceutical contaminants in water can cause antibiotic resistance development, toxicity to aquatic organisms, and endocrine disruption. Hence, the elimination of chemicals and other contaminants from wastewater prior to its release is a burgeoning concern in the domains of engineering and science. The use of treatment technologies in wastewater treatment plants can remove pharmaceutical contaminants through the oxidation process. However, many traditional wastewater treatment plants lack the advanced monitoring tools required to detect low concentrations of pharmaceuticals. Without the ability to detect these compounds, it's challenging to treat them effectively. The goal of this study was to use Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) algorithms to model and improve how Nevirapine and Efavirenz break down in different chlorination conditions. The RSM analysis revealed statistically significant models (F-values: Nevirapine, pH-t: 108.15, T-t: 76.55, ICC-t: 110.84), indicating a strong correlation between operational parameters (pH, temperature, and initial chlorine concentration) and degradation behavior. The ANN model accurately predicted the degradation of both Nevirapine and Efavirenz under various chlorination conditions, as confirmed by analyzing actual-predicted graphs, residual plots, and Mean Squared Error (MSE) values. The ANN model using ICC-t achieved the highest MOD value of 31.31 % for Nevirapine. The ANN model based on ICC-t yielded a maximum MOD value of 16.06 % for Efavirenz. These findings provide valuable insights into optimizing chlorination processes for better removal of these pharmaceutical contaminants from water.

Tetracycline (TC) removal from wastewater with activated carbon (AC) obtained from waste grape marc: activated carbon characterization and adsorption mechanism

In this study, activated carbons were obtained from grape marc for tetracycline removal from wastewater. Activated carbons were obtained by subjecting them to pyrolysis at 300, 500, and 700 °C, respectively, and the effect of pyrolysis temperature on activated carbons was investigated. The physicochemical and surface properties of the activated carbons were evaluated by SEM, FTIR, XRD, elemental analysis, N2 adsorption/desorption isothermal, thermal gravimetric (TG) and derivative thermogravimetric (DTG), and BET surface area analysis. When the BET surface areas were examined, it was found that 4.25 m2/g for activated carbon was produced at 300 °C, 44.23 m2/g for activated carbon obtained at 500 °C and 44.23 m2/g at 700 °C, which showed that the BET surface areas increased with increasing pyrolysis temperatures. The pore volumes of the synthesized activated carbons were 0.0037 cm3/g, 0.023 cm3/g, and 0.305 cm3/g for pyrolysis temperatures of 300, 500, and 700 °C, respectively, while the average pore size was found to be 8.02 nm, 9.45 nm, and 10.29 nm, respectively. A better adsorption capacity was observed due to the decrease in oxygen-rich functional groups with increasing pyrolysis temperature. It was observed that the activated carbon obtained from grape skins can easily treat hazardous wastewater containing tetracycline due to its high carbon content and surface functional groups. It was also shown that the activated carbon synthesized in this study has a higher pore volume despite its low surface area compared to the studies in the literature. Thanks to the high pore volume and surface active groups, a successful tetracycline removal was achieved.

A sustainable and highly efficient fossil-free carbon from olive stones for emerging contaminants removal from different water matrices

The olive stone is a large waste product of the olive oil extraction industry. The present study investigates developing activated carbon from olive stone waste (OSAC) to remove pharmaceuticals from water. Different temperatures and olive stone: KOH ratios were studied. The OSAC produced at 750 °C and 1:3 ratio was found to have the highest porosity and surface area and was tested in the adsorption process. Diclofenac and ciprofloxacin were selected as model contaminants. The adsorption process was optimized with regards to OSAC dosage, pH, temperature, and initial concentration of adsorbate. The OSAC was found to be effective for a wide pH range (2-11) with an optimum dosage of 1 g/L at 25 °C. The pharmaceuticals were almost completely removed in 75 min. The adsorption was endothermic and followed first-order kinetics with physical mechanisms such as electrostatic possibly being the main driver. The optimum conditions were applied to test the removal of diclofenac and ciprofloxacin in synthetic water, lake water (Lake Balaton, Hungary) and secondary wastewater for seven cycles. There was little difference between the removal of the tested water matrices highlighting the potency of OSAC as an adsorbent for pharmaceutical removal in industrial applications. The removal dropped from >99% for the first cycle to 20-30% for the seventh cycle.

Comprehensive investigation of isotherm, RSM, and ANN modeling of CO2 capture by multi-walled carbon nanotube

Chemical vapor deposition was used to produce multi-walled carbon nanotubes (MWCNTs), which were modified by Fe-Ni/AC catalysts to enhance CO2 adsorption. In this study, a new realm of possibilities and potential advancements in CO2 capture technology is unveiled through the unique combination of cutting-edge modeling techniques and utilization of the recently synthesized Fe-Ni/AC catalyst adsorbent. SEM, BET, and FTIR were used to analyze their structure and morphology. The surface area of MWCNT was found to be 240 m2/g, but after modification, it was reduced to 11 m2/g. The modified MWCNT showed increased adsorption capacity with higher pressure and lower temperature, due to the introduction of new adsorption sites and favorable interactions at lower temperatures. At 25 °C and 10 bar, it reached a maximum adsorption capacity of 424.08 mg/g. The optimal values of the pressure, time, and temperature parameters were achieved at 7 bar, 2646 S and 313 K. The Freundlich and Hill models had the highest correlation with the experimental data. The Second-Order and Fractional Order kinetic models fit the adsorption results well. The adsorption process was found to be exothermic and spontaneous. The modified MWCNT has the potential for efficient gas adsorption in fields like gas storage or separation. The regenerated M-MWCNT adsorbent demonstrated the ability to be reused multiple times for the CO2 adsorption process, as evidenced by the study. In this study, a feed-forward MLP artificial neural network model was created using a back-propagation training approach to predict CO2 adsorption. The most suitable and efficient MLP network structure, selected for optimization, consisted of two hidden layers with 25 and 10 neurons, respectively. This network was trained using the Levenberg-Marquardt backpropagation algorithm. An MLP artificial neural network model was created, with a minimum MSE performance of 0.0004247 and an R2 value of 0.99904, indicating its accuracy. The experiment also utilized the blank spreadsheet design within the framework of response surface methodology to predict CO2 adsorption. The proximity between the Predicted R2 value of 0.8899 and the Adjusted R2 value of 0.9016, with a difference of less than 0.2, indicates a high level of similarity. This suggests that the model is exceptionally reliable in its ability to predict future observations, highlighting its robustness.

Removal of oxytetracycline from wastewater by biochar modified with biosynthesized iron oxide nanoparticles and carbon nanotubes: Modification performance and adsorption mechanism

The pollution problem of oxytetracycline (OTC) from wastewater becomes more serious, so an efficient, economical, and green adsorption material is urgently explored. In this study, the multilayer porous biochar (OBC) was prepared by coupling carbon nanotubes with iron oxide nanoparticles synthesized by Aquabacterium sp. XL4 to modify corncobs under medium temperature (600 °C) conditions. The adsorption capacity of OBC could reach 72.59 mg g-1 after preparation and operation parameters were optimized. In addition, various adsorption models suggested that OTC removal resulted from the combined effect of chemisorption, multilayer interaction, and disordered diffusion. Meanwhile, the OBC was fully characterized and exhibited a large specific surface area (237.51 m2 g-1), abundant functional groups, stable crystal structure, high graphitization, and mild magnetic properties (0.8 emu g-1). The OTC removal mechanisms mainly included electrostatic interactions, ligand exchange, π-π bonding reactions, hydrogen bonds, and complexation. pH and coexistence substance experiments revealed that the OBC possesses a wide pH adaptation range and excellent anti-interference ability. Finally, the safety and reusability of OBC were confirmed by repeated experiments. In summary, OBC as a biosynthetic material shows considerable potential for application in the field of purifying new pollution from wastewater.

Review on lignocellulose valorization for nanocarbon and its composites: Starting from laboratory studies to business application

This study concerns a scoping and literature review of nanocarbon and its composites with details on specific propositions, including nanocarbon history, nanocarbon types, and lignocellulose nanocarbon types, properties, applications, toxicity, regulation, and business model for commercialization. The review brings novelties, comprehensively expounding on laboratory studies and industrial applications of biomass or lignocellulose materials-derived nanocarbon and its composites. Since its first discovery in the form of Buckyball in 1985, nanocarbon has brought interest to scientists and industries for applications. From the previous studies, it is discovered that many types of nanocarbon are sourced from lignocellulose materials. With their excellent properties of nanomaterials, nanocarbon has been harnessed for such as reinforcing and filler agents for nanocomposites or direct use of individual nanocarbon for specific purposes. However, the toxicological properties of nanocarbon have delivered a level of concern in its use and application. In addition, with the radically growing increase in the use of nanocarbon, policies have been enacted in several countries that rule on the use of nanocarbon. The business model for the commercialization of lignocellulose-based nanocarbon was also proposed in this study. This study can showcase the importance of both individual nanocarbon and nanocarbon-based composites for industrial implementations by considering their synthesis, properties, application, country legislations/regulations, and business model. The studies also can be the major references for researchers to partner with industries and governments in investing in lignocellulose-sourced nanocarbon potential research, development, and policies.

Remediation of pharmaceutical pollutants using graphene-based materials - A review on operating conditions, mechanism and toxicology

Graphene is a high surface area special carbon compound with exceptional biological, electronic and mechanical properties. Graphene-based materials are potential components used in water treatment on different modes and processes. Ibuprofen and ciprofloxacin are two commonly found pharmaceutical contaminants discharged into water bodies from industrial, domestic and hospital sources. Their concentration levels in water bodies are reported in the range of 1 μg/L to 6.5 mg/L and 0.050-100 μg/L respectively. Their toxic effects pose very high risk to the inhabiting organisms. Their ability to resist biodegradation and capacity to bioaccumulate makes the conventional methods less effective in removal. In the present article, treatment of these compounds via three methods, adsorption, photocatalytic degradation and electro-fenton reactions using graphene-based materials along with the methods adopted for synthesis and treatment are reviewed. The uptakes obtained by graphene-derived adsorbents are presented along with the optimal operating conditions. Studies reported complete removal of ibuprofen from wastewater was achieved at 7 pH for 60 min using graphene membrane as adsorbent and uptake of 99% of ciprofloxacin was exhibited for graphene nanoplates/boron nitrate aerogel at a pH of 7 and 60 min. The reduced graphene oxide surface exhibits higher affinity to light adsorption which leads to the formation of photo generated electrons. The future perspectives for improved applications of graphene-based materials and the research gap currently existing are highlighted.

Carbon-Based Materials as Effective Adsorbents for the Removal of Pharmaceutical Compounds from Aqueous Solution

Antibiotics are emerging water pollutants that have attracted significant attention from the scientific community. Antibiotics are generally released via hospital effluents, industrial production waste, animal manure, and irrigated agricultural land. Antibiotic residues can harm all living organisms, with the most detrimental consequence being the generation of antibiotic-resistant microorganisms, commonly known as “superbugs.” Antimicrobial resistance is a concern to the healthcare community as it complicates the treatment of infections. Thus, the development of effective and economical technologies to remove antibiotics from the environment is necessary. Adsorption is a promising technology owing to its effectiveness and high operational feasibility, and carbon-based adsorbents are primitive materials that are particularly suited for antibiotic adsorption. Herein, an overview of the current state of antibiotic pollution will be summarised, including the adverse effects of different antibiotics and challenges associated with antibiotic removal. The adsorption behaviours of tetracycline (TC), quinolone, penicillin, and macrolides on carbon-based adsorbents (i.e., activated carbon, carbon nanotubes, and graphene-based materials) are reviewed. The interactions between antibiotics and carbon-based adsorbents, adsorption mechanism, and adsorption behaviour under different conditions are emphasised. In addition, the limitations of adsorption technology are highlighted to direct future research.

Sensitivity Analysis with the Monte Carlo Method and Prediction of Atenolol Removal Using Modified Multiwalled Carbon Nanotubes Based on the Response Surface Method: Isotherm and Kinetics Studies

Atenolol (ATN) is a β-blocker drug extensively used to treat arrhythmias and high blood pressure. Because the human body cannot metabolize it completely, this drug has been commonly found in many environmental matrices. In the present study, the response surface method (RSM) was used for adsorption prediction of ATN on modified multiwalled carbon nanotubes (M-MWCNTs) by NaOCl and ultrasonic. The sensitivity analysis was done by the Monte Carlo method. Sensitivity analysis was performed to determine the effective parameter by the Monte Carlo simulator. Statistical analysis of variance (ANOVA) was performed by using the nonlinear second-order model of RSM. The influential parameters including contact time (min), adsorbent dosage (g/L), pH, and the initial concentration (mg/L) of ATN were investigated, and optimal conditions were determined. Kinetic of ATN adsorption on M-MWCNTs was evaluated using pseudo-first, pseudo-second-order, and intraparticle diffusion models. Equilibrium isotherms for this system were analyzed by the ISOFIT software. As per our result, optimum conditions in the adsorption experiments were pH 7, 60 min of contact time, 0.5 mg/L ATN initial concentration, and 150 mg/L adsorbent dose. In terms of ATN removal efficiency, coefficients of R2 and adjusted R2 were 0.999 and 0.998, respectively. Sensitivity analysis also showed that contact time has the greatest effect on increasing the removal of ATN. Pseudo-first-order (R2 value of 0.99) was the best kinetic model for the adsorption of ATN, and for isotherm, BET (AICC value of 3.27) was the best model that fit the experimental data. According to the obtained results from sensitive analysis, time was the most important parameter, and after that, the adsorbent dose and pH affect positively on ATN removal efficiency. It can be concluded that the modified multiwalled carbon nanotubes can be applied as one of the best adsorbents to remove ATN from the aqueous solution.

Multiwalled Carbon Nanotubes Promote Bacterial Conjugative Plasmid Transfer

Multiwalled carbon nanotubes (MWCNTs) regularly enter aquatic environments due to their ubiquity in consumer products and engineering applications. However, the effects of MWCNT pollution on the environmental microbiome are poorly understood. Here, we evaluated whether these carbon nanoparticles can elevate the spread of antimicrobial resistance by promoting bacterial plasmid transfer, which has previously been observed for copper nanomaterials with antimicrobial properties as well as for microplastics. Through a combination of experimental liquid mating assays between Pseudomonas putida donor and recipient strains with plasmid pKJK5::gfpmut3b and mathematical modeling, we here demonstrate that the presence of MWCNTs leads to increased plasmid transfer rates in a concentration-dependent manner. The percentage of transconjugants per recipient significantly increased from 0.21 ± 0.04% in absence to 0.41 ± 0.09% at 10 mg L-1 MWCNTs. Similar trends were observed when using an Escherichia coli donor hosting plasmid pB10. The identified mechanism underlying the observed dynamics was the agglomeration of MWCNTs. A significantly increased number of particles with >6 μm diameter was detected in the presence of MWCNTs, which can in turn provide novel surfaces for bacterial interactions between donor and recipient cells after colonization. Fluorescence microscopy confirmed that MWCNT agglomerates were indeed covered in biofilms that contained donor bacteria as well as elevated numbers of green fluorescent transconjugant cells containing the plasmid. Consequently, MWCNTs provide bacteria with novel surfaces for intense cell-to-cell interactions in biofilms and can promote bacterial plasmid transfer, hence potentially elevating the spread of antimicrobial resistance. IMPORTANCE In recent decades, the use of carbon nanoparticles, especially multiwalled carbon nanotubes (MWCNTs), in a variety of products and engineering applications has been growing exponentially. As a result, MWCNT pollution into environmental compartments has been increasing. We here demonstrate that the exposure to MWCNTs can affect bacterial plasmid transfer rates in aquatic environments, an important process connected to the spread of antimicrobial resistance genes in microbial communities. This is mechanistically explained by the ability of MWCNTs to form bigger agglomerates, hence providing novel surfaces for bacterial interactions. Consequently, increasing pollution with MWCNTs has the potential to elevate the ongoing spread of antimicrobial resistance, a major threat to human health in the 21st century.

Critical review on adsorptive removal of antibiotics: Present situation, challenges and future perspective

This review gives a proper dedicated understanding of the contamination level, sources, and biological dangers related with different classes of antibiotics in consumable water. The literature on the adsorption of antibiotics is relatively uncommon and developments are still under progression, especially for adsorbents other than activated carbon. Also, adsorption technique has already been applied vastly for water treatment. Notwithstanding significant progressions, designed natural wastewater treatment frameworks are just bearably effective (48-77%) in the expulsion of antibiotics. Hence, the compilation of available literature especially for antibiotic adsorption was much needed. Moreover, the conventional adsorbents have some limitations of their own. In this study, the main focus was laid on unconventional adsorbents such as Biochar, Biopolymers, Carbon Nanotubes, Clays, Metal-Organic Frameworks, Microalgae and some miscellaneous adsorbents. The mechanism of adsorption by the unconventional adsorbents includes electrostatic interactions, π-π bonding, weak Van der Waal forces, H-bonding and surface complexation, which was similar to that of conventional adsorbents and hence these unconventional adsorbents can easily replace the costlier conventional adsorbents with even better adsorption efficiency. This paper also briefly discussed the thermodynamics, adsorption equilibrium; isotherm and kinetics of adsorption. This review paper seizes the critical advances of adsorption phenomenon at various interfaces and lays the foundation for current scenario associated with further progress. Besides, this study would help in understanding the antibiotic adsorption, cost estimation and future goals that will attract the young the researchers of this field.

Treatment technologies to mitigate the harmful effects of recalcitrant fluoroquinolone antibiotics on the environ- ment and human health

Antibiotic proliferation in the environment and their persistent nature is an issue of global concern as they induce antibiotic resistance threatening both human health and the ecosystem. Antibiotics have therefore been categorized as emerging pollutants. Fluoroquinolone (FQs) antibiotics are an emerging class of contaminants that are used extensively in human and veterinary medicine. The recalcitrant nature of fluoroquinolones has led to their presence in wastewater, effluents and water bodies. Even at a low concentration, FQs can stimulate antibacterial resistance. The main sources of FQ contamination include waste from pharmaceutical manufacturing industries, hospitals and households that ultimately reaches the wastewater treatment plants (WWTPs). The conventional WWTPs are unable to completely remove FQs due to their chemical stability. Therefore, the development and implementation of more efficient, economical, convenient treatment and removal technologies are needed to adequately address the issue. This review provides an overview of the technologies available for the removal of fluoroquinolone antibiotics from wastewater including adsorptive removal, advanced oxidation processes, removal using non-carbon based nanomaterials, microbial degradation and enzymatic degradation. Each treatment technology is discussed on its merits and limitations and a comparative view is presented on the choice of an advanced treatment process for future studies and implementation. A discussion on the commercialization potential and eco-friendliness of each technology is also included in the review. The importance of metabolite identification and their residual toxicity determination has been emphasized. The last section of the review provides an overview of the policy interventions and regulatory frameworks that aid in retrofitting antibiotics as a central key focus contaminant and thereby defining the discharge limits for antibiotics and establishing safe manufacturing practices.

Recent innovations of nanotechnology in water treatment: A comprehensive review

Environmental pollution from organic and inorganic pollutants poses a threat to the ecosystem. Pollutant's prevalence and persistence have increased significantly in recent years. In order to enhance the quality of naturally accessible water to a level suitable for human consumption, a number of techniques have been employed. In this context, the use of cutting-edge nanotechnology to classical process engineering paves the way for technical encroachments in advanced water and wastewater technology. Nanotechnology has the potential to ameliorate the quality, availability, and viability of water supplies in the long run by facilitating reuse, recycling and remediation of water. The promising role of nanotechnology in wastewater remediation is highlighted in this paper, which also covers current advancements in nanotechnology-mediated remediation systems. Moreover, nano-based materials such as nano-adsorbents, photocatalysts, nano-metals and nanomembranes are discussed in this review of recent breakthroughs in nanotechnologies for water contaminant remediation.

Carbon-based adsorbents for fluoroquinolone removal from water and wastewater: A critical review

This review summarizes the adsorptive removal of Fluoroquinolones (FQ) from water and wastewater. The influence of different physicochemical parameters on the adsorptive removal of FQ-based compounds is detailed. Further, the mechanisms involved in the adsorption of FQ-based antibiotics on various adsorbents are succinctly described. As the first of its kind, this paper emphasizes the performance of each adsorbent for FQ-type antibiotic removal based on partition coefficients of the adsorbents that is a more sensitive parameter than adsorption capacity for comparing the performances of adsorbents under various adsorbate concentrations and heterogeneous environmental conditions. It was found that π-π electron donor-acceptor interactions, electrostatic interactions, and pore-filling were the most prominent mechanisms for FQ adsorption by carbon and clay-based adsorbents. Among all the categories of adsorbents reviewed, graphene showed the highest performance for the removal of FQ antibiotics from water and wastewater. Based on the current state of knowledge, this review fills the gap through methodolically understanding the mechanism for further improvement of FQ antibiotics adsorption performance from water and wastewater.

Coating magnetite alters the mechanisms and site energy for sulfonamide antibiotic sorption on biochar

Magnetite-coating biochar (MBC) is a promising remediator for antibiotic contamination. Accurate models describing the sorption affinity are required to better understand the role of minerals. In this study, the presence of magnetite led to the improvements of oxygen-containing groups (i.e. C˭O) and regulation of π-systems within BC. Based on Dubinin-Ashtakhov (DA) model, the differences of site energy (E_m) and sorption heterogeneity (σ_e*) led to the variances between sorption capacities of sulfonamides (SAs). The positive correlations between E_m and the oxygen content or pore volume of MBCs indicated that π-π interactions, H-bonding, and pore-filling may act as the high energy sites. Moreover, σ_e* was related to the distribution of magnetite on BC and their porosities. These results suggested that compared to BCs, the coating minerals improved the π-interaction assisted H-bonding and proton configuration of antibiotic when sorbing on MBC. The negative correlations between the E_m of different SAs with their molecular sizes and solubilities resulted from steric effects and competition with water, which further confirmed the proposed high energy sites on MBCs. This study provided the insightful information of site energy distribution and understanding of fate and transport of organic pollutants on BC when the iron minerals were embedded or coated.

Adsorption characteristics of chloramphenicol onto powdered activated carbon and its desorption performance by ultrasound

In this work, the adsorption characteristics, including adsorption kinetic, isotherm and thermodynamics of chloramphenicol (CAP) onto powdered activated carbon (PAC), were carried out, and the feasibility of using ultrasound to regenerate saturated PAC in aqueous solution was evaluated. The adsorption results demonstrated that the adsorption mechanism was a complex process including surface adsorption, external liquid membrane diffusion and intraparticle diffusion as well, and the adsorption process was endothermic and non-spontaneous. The optimal conditions for PAC regeneration were as follows: acoustic density of 0.36 W/mL, saturated carbon dosage of 1.0 g/L and pH value of 10.36. The analysis of thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FTIR), Brunauer-Emmett-Teller (BET) surface area, pore size distribution and scanning electron microscopy (SEM) of PAC samples revealed that ultrasound mainly acted on surface functionalities, meso-pores and macro-pores of PAC through hydroxyl radical oxidization, high-pressure shock waves and high-speed microjets due to cavitation effect. This study highlighted that ultrasound could be efficiently desorbing CAP from saturated PAC. Practical applications of this method for PAC regeneration with complex natural matrices under environmentally realistic conditions were conducted and the adsorption capacity of the regenerated PAC decreased.

Carboxylated cellulose nanofiber/montmorillonite nanocomposite for the removal of levofloxacin hydrochloride antibiotic from aqueous solutions

Herein, we report the facile two-step synthesis of an effective carboxylated cellulose nanofiber/montmorillonite nanocomposite (CMNFs-MMT) adsorbent for levofloxacin hydrochloride (Levo-HCl). CMNFs-MMT was characterized using scanning electron microscopy, energy dispersive X-ray spectrometry, Brunauer-Emmett-Teller measurements, X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. Based on the central composite design, the effects of various factors on the removal of Levo-HCl by the CMNFs-MMT were explored, wherein the effect of pH was the most significant. To gain a clearer perspective on the adsorption process of Levo-HCl onto CMNFs-MMT, the adsorption kinetics and isotherms were also measured, revealing that the reaction is pseudo-second-order and the Sips models provide the best fit with experimental data. Comparing the adsorption in pure water with the removal in river water, the rate of river water removal (90.37%) was slightly lower than that of pure water (93.97%) when adsorption equilibrium was reached, confirming that CMNFs-MMT is not easily influenced by environmental conditions. Reusability experiments indicate that CMNFs-MMT can maintain a certain adsorption capacity for Levo-HCl after six uses. Overall, this work indicates that CMNFs-MMT is an effective adsorbent for eliminating Levo-HCl from aqueous media in future engineering applications.

Adsorption, desorption and coadsorption behaviors of sulfamerazine, Pb(II) and benzoic acid on carbon nanotubes and nano-silica

In this study, nano-silica (Nano-SiO₂), oxidized (O-CNTs) and graphitized multi-walled carbon nanotubes (G-CNTs) were applied as model adsorbents to study the adsorption, desorption and coadsorption behaviors of sulfamerazine (SMR), Pb(II) and benzoic acid (BA). The results showed that charge assisted H-bond (CAHB) formation played an important role in adsorption of SMR and BA on O-riched nanomaterials. The adsorption capacities of Pb(II) on CNTs were 21.46- 26.77 times higher than that on Nano-SiO₂, which was mainly attributed to surface complexation and cation-π interaction. The fraction of Pb²⁺ adsorbed in the inside channel of CNTs should not be ignored. In coexisting systems, the absolute sorption inhibition of the SMR (ΔQ_e^SMR) was compared with the amount of competitor adsorbed. Competitive sorption was observed as indicated by adding Pb(II) decreased adsorption of SMR on Nano-SiO₂ (ΔQ_e^SMR > 0), but hardly affected SMR adsorption on CNTs (ΔQ_e^SMR ≈ 0) which was attributed to cation-π interaction. In addition, CAHB formed between SMR and Nano-SiO₂ (ΔpK_a ≈ 4.34) was weaker than that formed between SMR and O-CNTs (ΔpK_a ≈ 3.15), which also consequently resulted in stronger competition of Pb(II) to SMR on Nano-SiO₂ than that on O-CNTs. Moreover, coexisting BA increased adsorption of SMR on Nano-SiO₂ and G-CNTs (ΔQ_e^SMR < 0), but did not result in an apparent competition on SMR adsorption by O-CNTs (ΔQ_e^SMR ≈ 0). These results emphasize that the environmental behaviors of a certain pollutant should be assessed carefully by considering the presence of other pollutants.

Adsorptive removal of apramycin antibiotic from aqueous solutions using Tween 80-and Triton X-100 modified clinoptilolite: experimental and fixed-bed modeling investigations

This study examined the performance of natural clinoptilolite (NC) modified with two surfactants of Triton X-100 (NC-Triton) and Tween 80 (NC-Tween) on apramycin (APR) adsorption from wastewater in batch and continues systems. The optimum pH, contact time, adsorbent dosage, and temperature were achieved. The findings revealed that the sorption was best described using the Langmuir isotherm compared to other isotherms. The maximum adsorption capacity of NC-Triton was greater than NC and NC-Tween. The lumped method was applied to solve the fixed-bed equations; predict breakthrough curve; determine axial dispersion coefficient and overall mass transfer coefficient parameters; and compare theoretical results with experimental results. Good fitness of experimental data with kinetic models of intra-particle diffusion, pseudo-first-order/liquid film diffusion and pseudo-second-order for NC, NC-Tween and NC-Triton, respectively, indicated that they were more suitable than the other models. Endothermic and spontaneous processes were resulted from positive enthalpy and negative Gibbs free energy changes, respectively.

Developments in the Application of Nanomaterials for Water Treatment and Their Impact on the Environment

Nanotechnology is an uppermost priority area of research in several nations presently because of its enormous capability and financial impact. One of the most promising environmental utilizations of nanotechnology has been in water treatment and remediation where various nanomaterials can purify water by means of several mechanisms inclusive of the adsorption of dyes, heavy metals, and other pollutants, inactivation and removal of pathogens, and conversion of harmful materials into less harmful compounds. To achieve this, nanomaterials have been generated in several shapes, integrated to form different composites and functionalized with active components. Additionally, the nanomaterials have been added to membranes that can assist to improve the water treatment efficiency. In this paper, we have discussed the advantages of nanomaterials in applications such as adsorbents (removal of dyes, heavy metals, pharmaceuticals, and organic contaminants from water), membrane materials, catalytic utilization, and microbial decontamination. We discuss the different carbon-based nanomaterials (carbon nanotubes, graphene, graphene oxide, fullerenes, etc.), and metal and metal-oxide based nanomaterials (zinc-oxide, titanium dioxide, nano zerovalent iron, etc.) for the water treatment application. It can be noted that the nanomaterials have the ability for improving the environmental remediation system. The examination of different studies confirmed that out of the various nanomaterials, graphene and its derivatives (e.g., reduced graphene oxide, graphene oxide, graphene-based metals, and graphene-based metal oxides) with huge surface area and increased purity, outstanding environmental compatibility and selectivity, display high absorption capability as they trap electrons, avoiding their recombination. Additionally, we discussed the negative impacts of nanomaterials such as membrane damage and cell damage to the living beings in the aqueous environment. Acknowledgment of the possible benefits and inadvertent hazards of nanomaterials to the environment is important for pursuing their future advancement.

Facile Fabrication of Flocculent Magnesium Silicate for the Adsorption of Oxytetracycline

The discharge of antibiotics and the potential threat to organisms posed by this have received increasing attention. In this work, flocculent magnesium silicate (FMS) was fabricated by a facile hydrothermal and freeze-drying process, and its adsorption behavior for antibiotic oxytetracycline (OTC) was investigated. FMS presented a sepiolite-type structure and the alkaline solution promoted its hydroxylation. A hierarchical pore structure ranging from micropores to macropores and a high specific surface area of 660 m2/g were exhibited. FMS exhibited a higher adsorption amount in neutral solution than in acidic or alkaline conditions as the physicochemical properties of FMS and OTC were significantly affected by the pH. Adsorption isotherm could be well-described by the Langmuir model, and the calculated saturated adsorption capacity was as high as 265 mg/g. Adsorption kinetics followed the pseudo-second-order kinetic model, and the adsorption rate-controlling step was intraparticle diffusion. Thermodynamic parameters indicated that the adsorption was a spontaneous physicochemical reaction. After five cycles, around 91% of the adsorption performance was still maintained, demonstrating the excellent reusability of FMS. The sepiolite-type FMS fabricated in this work could be applied to remove OTC from wastewater.

Occurrence of pharmaceuticals in aquatic environments: A review and potential impacts in South Africa

The carbon footprint of pharmaceuticals through manufacturing, distribution, the incineration of unwanted pharmaceuticals as well as the packaging of pharmaceutical waste is an emerging and enormous challenge. Pharmaceuticals are major contributors to water pollution in aquatic environments that include surface water and groundwater. These pollutants arise not only from waste products but also from pharmaceutical products that have not been properly disposed of. The continuous exposure to unspecified sub-therapeutic doses of antibiotics presents risks to humans and other animals. Due to their extensive use and incomplete elimination, antibiotics have been detected in various environmental waters. The persistence of antibiotics in the environment and chronic exposure of organisms to these chemical stressors has also proven to have ecotoxicological effects. The prevailing emergence of antimicrobial resistance amongst bacteria is an area of primary concern, especially with regard to the release of antibiotics into the environment. Resistance is the acquired ability of bacterial populations to render an antibiotic ineffective as a result of a change in bacterial DNA which occurs when bacteria are subjected to an antibiotic concentration that will not kill them. A sub-lethal concentration possibly exerts a selective pressure that can result in the development of antimicrobial resistance in bacteria. It is clear that there is a need for extensive research to improve regulations and guidance on pharmaceutical waste management, pharmaceutical take-back programmes and consumer awareness.

Synergic removal of tetracycline using hydrophilic three-dimensional nitrogen-doped porous carbon embedded with copper oxide nanoparticles by coupling adsorption and photocatalytic oxidation processes

Adsorption and photocatalytic oxidation are promising technologies for eliminating antibiotics (e.g. tetracycline) in aquatic environments. However, traditional powdery nanomaterials are limited by drawbacks of difficult separation and lack of synergistic function, which do not conform to the practical demand. Herein, we developed a simple one-step gelation-pyrolysis route to fabricate hydrophilic three-dimensional (3D) porous photocatalytic adsorbent, in which CuO nanoparticles are uniformly and firmly embedded in nitrogen-doped (N-doped) porous carbon frameworks. The obtained N-doped carbon/CuO bulky composites exhibited excellent ability to adsorb tetracycline hydrochloride (TC), which was subsequently photo-oxidized under visible light. Their hydrophilic nature favors the adsorption processes toward TC, with a maximum adsorption capacity reaching 25.03 mg∙g^-1. In addition, >94.4% of TC molecules could be photo-degraded in 4 h with good cycling efficiency after three consecutive tests. Finally, a reaction scheme for removal process of TC was proposed. The obtained 3D porous N-doped carbon/CuO nanocomposites show great promise for efficient removal of antibiotics in aqueous solution by synergistically utilizing adsorption and photocatalytic oxidation processes.

Effect of the adsorption pH and temperature on the parameters of the Brouers-Sotolongo models

The goal of the present paper was to elucidate if-and how-the parameters of the Brouers-Sotolongo fractal (BSf) (n,α) kinetic model (α and τ_C) on the one hand, and of the generalised Brouers-Sotolongo (GBS) isotherm model (a and b) on the other hand, are correlated with adsorption pH and temperature. For that purpose, adsorption of aqueous solutions of two common dyes, methylene blue (MB) and methyl orange (MO) was carried out on four activated carbons (ACs) at three temperatures (25, 35 and 50 °C) and three pH (2.5, 5 and 8). Adsorption kinetics and isotherms were measured, and the corresponding curves were best fitted with specific forms of the aforementioned models, and corresponding to equations known as BSf (1,α) kinetic and Brouers-Gaspard isotherm models. Correlations between all model parameters and adsorption conditions were found, bringing some information about the adsorbate-adsorbent interaction.

A novel fluorometric aptasensor based on carbon nanocomposite for sensitive detection of Escherichia coli O157:H7 in milk

Escherichia coli O157:H7 is an extremely serious foodborne pathogen accounting for a vast number of hospitalizations. In this system, a simple, rapid, and safe compound method was developed based on carbonyl iron powder (CIP) and multiwalled carbon nanotubes (MWCNT). Then, the CIP@MWCNT-based aptasensor was constructed by strong π-stacking between nanocomposite and aptamer, single-strand DNA, causing fluorescent quenching of the dye-labeled aptamer. The restoration of dye fluorescence could be achieved when aptamer came off the surface of the CIP@MWCNT nanocomposite due to the presence of target bacteria. To the best of our knowledge, this fabrication of magnetic carbon nanotubes without irritating and corrosive reagents is described for the first time. The sensing platform was also an improvement on the conventional formation of the aptasensor between carbon materials and DNA aptamer. The nanocomposite was verified by diverse characterization of zeta potential, Fourier-transform infrared spectroscopy, transmission electron microscopy, and energy dispersive x-ray analysis. The CIP@MWCNT-based aptasensor was an effective nanoplatform for quantitative detection of E. coli O157:H7, and was measured to have high specificity, good reproducibility, and strong stability. The aptasensor's capacity to quantify E. coli O157:H7 was as low as 7.15 × 10³ cfu/mL in pure culture. The detection limit of E. coli O157:H7 was 3.15 × 10² cfu/mL in contaminated milk after 1 h of pre-incubation. Hence, the developed assay is a new possibility for effective synthesis of nanocomposites and sensitive tests of foodborne pathogens in the dairy industry.

A comprehensive study on the application of FeNi3@SiO2@ZnO magnetic nanocomposites as a novel photo-catalyst for degradation of tamoxifen in the presence of simulated sunlight

Pharmaceutical compounds at trace concentrations are found in the environment, especially in drinking water and food, posing significant negative effects on humans as well as on animals. This paper aimed to examine the diagnostic catalytic properties and efficacy of a novel synthesized photocatalyst, namely FeNi₃@SiO₂@ZnO magnetic nanocomposite, for the removal of tamoxifen (TMX) from wastewater under simulated sunlight. According to the results, it was found that TMX was completely degraded operating under optimized conditions (i.e. pH = 7, catalyst dose = 0.01 g/L, initial TMX concentration = 20 mg/L and reaction time = 60 min). The reaction kinetics of TMX degradation followed a pseudo-first order kinetics model. The final by-products from the TMX photodegradation were water, carbon dioxide, acetic acid, nitroacetic acid methyl ester, 2-methyl-2-pentenal, and 4-methyl-2-pentanol. In addition, the synthesized photocatalyst could successfully performed five consecutive photodegradation cycles. The obtained results revealed that the synthesized FeNi₃@SiO₂@ZnO magnetic nanocomposite holds a great potential to be applied as a photocatalyst for the degradation of TMX on an industrial scale.

Molecular Interpretation of Pharmaceuticals’ Adsorption on Carbon Nanomaterials: Theory Meets Experiments

The ability of carbon-based nanomaterials (CNM) to interact with a variety of pharmaceutical drugs can be exploited in many applications. In particular, they have been studied both as carriers for in vivo drug delivery and as sorbents for the treatment of water polluted by pharmaceuticals. In recent years, the large number of experimental studies was also assisted by computational work as a tool to provide understanding at molecular level of structural and thermodynamic aspects of adsorption processes. Quantum mechanical methods, especially based on density functional theory (DFT) and classical molecular dynamics (MD) simulations were mainly applied to study adsorption/release of various drugs. This review aims to compare results obtained by theory and experiments, focusing on the adsorption of three classes of compounds: (i) simple organic model molecules; (ii) antimicrobials; (iii) cytostatics. Generally, a good agreement between experimental data (e.g. energies of adsorption, spectroscopic properties, adsorption isotherms, type of interactions, emerged from this review) and theoretical results can be reached, provided that a selection of the correct level of theory is performed. Computational studies are shown to be a valuable tool for investigating such systems and ultimately provide useful insights to guide CNMs materials development and design.

Adsorption of Sulfamethazine Drug onto the Modified Derivatives of Carbon Nanotubes at Different pH

The sulfamethazine drug interaction with carbon nanotubes was investigated with the aim of improving the adsorption capacity of the adsorptive materials. Experiments were performed to clarify how the molecular environment affects the adsorption process. Single-walled carbon nanotubes have a higher removal efficiency of sulfamethazine than pristine or functionalized multi-walled carbon nanotubes. Although the presence of cyclodextrin molecules improves the solubility of sulfamethazine, it reduces the adsorption capacity of the carbon nanotube towards the sulfamethazine drug and, therefore, inhibits the removal of these antibiotic pollutants from waters by carbon nanotubes.

Adsorption capacity of different types of carbon nanotubes towards metronidazole and dimetridazole antibiotics from aqueous solutions: effect of morphology and surface chemistry

The effect of surface chemistry and morphology of carbon nanotubes (CNTs) on their adsorption capacity towards dimetridazole (DTZ) and metronidazole (MNZ) antibiotics from water solutions was investigated in this work. The CNTs studied were single-walled carbon nanotubes (SWCNTs), CNTs doped with nitrogen (N-CNTs), multiwalled CNTs (MWCNTs), and MWCNTs functionalized with carboxylic groups (MWCNT-COOH). The experimental adsorption equilibrium data were best interpreted with the Redlich-Peterson (R-P) isotherm model. At T of 25 °C and pH of 7, the capacities of adsorption decreased as follows: SWCNT > MWCNT > N-CNT ≈ MWCNT-COOH, and the maximum capacities of SWCNT towards MNZ and DTZ were 101 mg/g and 84 mg/g, correspondingly. The SWCNT had the highest adsorption capacity because SWCNT presented the largest surface area, and was the only nanomaterial with a basic surface. The adsorption of both antibiotics on the CNTs was predominantly ascribed to the π-π stacking. The basic groups promoted the π-π stacking interactions and favored the adsorption capacity towards MNZ and DTZ. The capacity of SWCNT for adsorbing MNZ was lessening substantially by reducing the pH from 11 to 2, and the electrostatic interactions caused this trend. The Sheindorf-Rebuhn-Sheintuch adsorption model interpreted the data for the competitive adsorption of DTZ and MNZ on SWCNT adequately.

Tuning tetracycline removal from aqueous solution onto activated 2:1 layered clay mineral: Characterization, sorption and mechanistic studies

Water pollution due to emerging contaminants (especially pharmaceuticals) is a major environmental threat which results in the development of antibiotic-resistant bacteria/resistance genes in the aquatic environment. Therefore, robust and cost-effective methods are required to address this problem. In this study, thermal activation was opted for the modification of natural bentonite clay (BC) and utilized to investigate the adsorptive removal of tetracycline (TC) from aqueous solution. The physicochemical surface properties of the raw and modified bentonite samples were also investigated. The BET analysis revealed that the thermally activated bentonite (TB) has better properties than BC. The surface area of TB was found to be more than two-fold higher compared to that of BC. The FTIR spectra exhibited the existence of AlOH, SiO and SiOSi functional groups in the samples, confirming the presence of hydrated aluminosilicate in the clay. The effects of various operating parameters were analyzed via optimization studies. The maximum monolayer adsorption capacity estimated by Langmuir model was found to be 156.7 and 388.1 mg g^-1 for BC and TB, respectively. Furthermore, fixed-bed column studies were performed to get insights into the adsorption behavior of TB in a dynamic system. The mechanism of TC adsorption by TB was successfully explored.

Removal of Pharmaceutical Contaminants in Wastewater Using Nanomaterials: A Comprehensive Review

BACKGROUND

The limitless presence of pharmaceutical contaminants in discharged wastewater has emerged as a threat to aquatic species and humans. Their presence in drinking water has although raised substantial concerns, very little is known about the fate and ecological impacts of these pollutants. As a result, these pollutants are inevitably introduced to our food chain at trace concentrations. Unfortunately, the conventional wastewater treatment techniques are unable to treat pharmaceuticals completely with practical limitations. The focus has now been shifted towards nanotechnology for the successful remediation of these persistent pollutants. Thus, the current review specifically focuses on providing readers brief yet sharp insights into applications of various nanomaterials for the removal of pharmaceutical contaminants.

METHODS

An exhaustive collection of bibliographic database was done with articles having high impact and citations in relevant research domains. An in-depth analysis of screened papers was done through standard tools. Studies were categorized according to the use of nanoscale materials as nano-adsorbents (graphene, carbon nanotubes), nanophotocatalysts (metal, metal oxide), nano-filtration, and ozonation for promising alternative technologies for the efficient removal of recalcitrant contaminants.

RESULTS

A total of 365 research articles were selected. The contemporary advancements in the field of nanomaterials for drinking and wastewater treatment have been thoroughly analyzed along with their future perspectives.

CONCLUSION

The recommendations provided in this article will be useful to adopt novel strategies for on-site removal of the emerging contaminants in pharmaceutical effluents and related industries.

Structural design of magnetic biosorbents for the removal of ciprofloxacin from water

Magnetic biosorbents with specific morphological and molecular structure (PMCCs) were designed for the removal of ciprofloxacin (CIP) from water. Radical polymerization method was applied to immobilize the designed polymer brushes onto core-shell shaped magnetic microspheres to fabricate PMCCs. PMCCs exhibited a maximum adsorption capacity of 527.93 mg·g^-1, which is much higher than reported adsorbents, owing to the complete stretch of polymer brushes and increased active sites as well as enhanced interaction. The investigation on the adsorption behavior of PMCCs for CIP manifested that CIP adsorption well fitted the Langmuir isotherm model and pseudo-second-order kinetic model. The calculated thermodynamic parameters suggested that CIP adsorption onto PMCCs was spontaneous and exothermic. Further recycling experiments showed a loss of less than 20% in the CIP adsorption capacity after five times, demonstrating the reusability of the as-designed biosorbents.

Advances in the application, toxicity and degradation of carbon nanomaterials in environment: A review

Carbon nanomaterials (CNMs) are novel nanomaterials with excellent physicochemical properties, which are widely used in biomedicine, energy and sensing. Besides, CNMs also play an important role in environmental pollution control, which can absorb heavy metals, antibiotics and harmful gases. However, CNMs are inevitably entering the environment while they are rapidly developing. They are harmful to living organisms in the environment and are difficult to degrade under natural conditions. Here, we systematically describe the toxicity of carbon nanotubes (CNTs), graphene (GRA) and C₆₀ to cells, animals, humans, and microorganisms. According to the current research results, the toxicity mechanism is summarized, including oxidative stress response, mechanical damage and effects on biological enzymes. In addition, according to the latest research progress, we focus on the two major degradation methods of chemical degradation and biodegradation of CNTs, GRA and C₆₀. Meanwhile, the reaction conditions and degradation mechanisms of degradation are respectively stated. Moreover, we have prospects for the limitations of CNM degradation under non-experimental conditions and their potential application.

A critical review on organic micropollutants contamination in wastewater and removal through carbon nanotubes

The prevalence of organic micropollutants (OMPs) in various environmental compartments is posing a serious health risks to all kinds of lives on the planet. The levels of OMPs such as polyaromatic hydrocarbons, antibiotics, pesticides, contraceptive medicines, and personal care products in water bodies are increasing with each passing day. It is an urgent need of time to limit the release of OMPs into the environment, and to remove the prevailing OMPs for sustainable environmental management. The majority of the conventional means of water decontamination are either inefficient or expensive. However, due to nanosize, high surface area, and hollow and layered structure, carbon nanotubes (CNTs) serve as excellent sorbents for the removal of a diverse range of OMPs. The occurrence of emerging OMPs and their detrimental effects on human and animal health are collected and discussed in this review. The characteristics and efficacy of various CNTs (pristine and modified) for the efficient removal of different OMPs, and the removal mechanisms have been reviewed and discussed. The literature demonstrated that adsorption of OMPs onto CNTs is very complicated and rely on multiple factors including the properties of adsorbent and the adsorbate as well as solution chemistry. It was found that H-bonding, electrostatic interactions, van der Waals forces, hydrophobic interactions, H-π bongs, and π-π interactions were the major mechanisms responsible for the adsorption of OMPs onto various kinds of CNTs. Despite of higher affinities for OMPs, hydrophobicity and higher costs restrain the practical application of CNTs for wastewater treatment on large scale. However, continuous production may lead to the development of cost-effective, efficient and eco-friendly CTNs technology for wastewater treatments in future.

Insight to aspirin sorption behavior on carbon nanotubes from aqueous solution: Thermodynamics, kinetics, influence of functionalization and solution parameters

The chronic exposure to the pharmaceuticals and personal care products contaminants in water represent a serious public health problem to man and animal. We studied the removal of aspirin (Asp) as an example to these hazardous materials from an aqueous solution using functionalized (FMCNT) and pristine multiwall carbon nanotubes (PMCNT). The characterization of synthetic sorbents was examined with scanning electron energy-dispersive microscopy and transmission electron microscopy. The effects of adsorption time, sorbent mass, solution pH, ionic strength, and temperature were optimized. The functionalization increased the surface area from 151 to 181 m² g^-1. Consequently, the adsorption capacity increased from 41 mg g^-1 to 58 mg g^-1 for PMCNT and FMCNT, respectively. The results showed that the adsorption kinetic follows the pseudo-second-order model with very good agreement. Whereas, the adsorption mechanism study showed a partial agreement with the liquid-film diffusion model on PMCNT and FMCNT at 25 °C and 35 °C, respectively, with acceptable linear regression coefficients. The adsorption isotherm results revealed that the adsorption fits the Freundlich model. The thermodynamic study revealed that, Asp adsorption on both sorbents is exothermic, spontaneous and favorable. FMCNT showed relatively high removal efficiency when compared with the PMCNT when used for most of the conditions investigated.

Using Magnetic Multiwalled Carbon Nanotubes as Modified QuEChERS Adsorbent for Simultaneous Determination of Multiple Mycotoxins in Grains by UPLC-MS/MS

The simultaneous detection of multiple mycotoxins is important due to the increased toxic effects of combined mycotoxins in grains. In this research, a combination of modified QuEChERS with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was used for simultaneous detection of 20 mycotoxins in grains. A series of different types of magnetic (Fe₃O₄) nanoparticles modified with multiwalled carbon nanotubes (Fe₃O₄-MWCNTs) were designed as modified QuEChERS adsorbents for facile and efficient purification and for target interferences removal in the matrices. When there is an external magnetic field, the proposed modified QuEChERS method uses a shorter pretreatment time compared with the traditional QuEChERS method, which makes it possible to conduct high-throughput analyses. To optimize the QuEChERS process, the extraction solvent and the type and amount of the Fe₃O₄-MWCNTs were investigated. Under optimal conditions, the method was validated and showed satisfactory linearity (r² ≥ 0.9965), good recovery (73.5-112.9%), good precision (1.3-12.7%), and excellent sensitivity (ranging from 0.0021 to 5.4457 ng g^-1), which indicates that this method can be used for detecting multiple mycotoxins in real samples.

Carbon-based materials as adsorbent for antibiotics removal: Mechanisms and influencing factors

With the development of the removal of organic pollutants in the soil and water environment, antibiotics have been considered as emerging pollutants and received considerable attention among the scientific community. Thus, there is a need for an effective, economical, fast, operational feasible and environmental-friendly technology to remove antibiotics. Adsorption technology would be one of the most promising option on the basis that it best meets the criteria we set out above. From the most primitive activated carbon to the most innovative modified biochar, carbon-based materials have played a significant role in the adsorption process of antibiotics all the time. This paper reviews the adsorption behavior of some representative antibiotics (e.g., chloramphenicols, sulfonamides, tetracyclines, flouroquinolones) over various carbonaceous materials (i.e., activated carbon, carbon nanotubes, graphene, and biochar). Nevertheless, in addition to the structural characteristics and adsorption capacities of carbon-based materials, a special emphasis was placed on the underlying adsorption mechanisms and roles of different influencing factors in the adsorption process. Moreover, the knowledge gaps and research challenges have been highlighted, including design and optimization of the carbonaceous materials for antibiotics adsorption.

Facile fabrication of hierarchical porous ZIF-8 for enhanced adsorption of antibiotics

Aiming for improve mass transfer rate of antibiotics adsorption from water, a strategy of building larger pores (>2 nm) in microporous MOFs has been put forward. However, most of reported approaches are complicated and inefficient. Herein, a facile one-spot approach to fabricate hierarchical porous Zeolitic Imidazolate Framework-8 (HpZIF-8) was developed, where poly(diallyldimethylammonium chloride) (PDDA) was selected as structure-directing agent to modulate the growth of microporous ZIF-8 (mZIF-8). The final products with meso- and macropores exhibit hierarchical porosity. The mechanism was a two-step process: First, crystal nucleus aggregated initiated by electrostatic interaction between cationic PDDA and deprotonated 2-MI anions. Second, Ostwald ripening process and orientated growth occurred with further growth of crystals. For removing Tetracycline Hydrochloride (TH) and Chloramphenicol (CP) from water, hierarchical porous HpZIF-8-10(D) (D = 1.0, 1.5, 2.0) showed larger adsorption capacity than mZIF-8-10 despite of decreased BET surface area, which could be attributed to novel hierarchical porous structures. The adsorption kinetics and isotherms of TH and CP by HpZIF-8-10(1.5) were analyzed. The strategy present here may provide new thoughts for designing more abundant MOF structures and further expand their application range.

Efficient removal of sulfamerazine (SMR) by ozonation in acetic acid solution after enrichment SMR from water using granular activated carbon

Sulfamerazine (SMR) as a persistent organic pollutant in waste streams is of growing environmental concern. This study explores the extraction SMR from water into an acetic acid (AA) solution using granular activated carbon (GAC), and removal of SMR by ozonation in AA solution. Systematic experiments have shown that GAC can be used as an adsorbent to transfer sulfamerazine from water to AA solution. SMR removal efficiency is 99.5% in 10% AA aqueous solution, which is better than in water. The removal rate of SMR in the AA solution decreased as the initial molar ratio of SMR and O3 increased. The removal rate of SMR decreased with Fe3+ present in the reactive system. The removal of SMR is dominated by indirect ozonation in water, while the SMR removal is an effect of both direct and indirect ozonation in AA solution. It is a very efficient process for the degradation of SMR in micro polluted water when using combined GAC adsorption-desorption in AA solution and ozonation of the resulting solution.

Daptomycin adsorption on magnetic ultra-fine wood-based biochars from water: Kinetics, isotherms, and mechanism studies

The adsorption of a new antibiotic, daptomycin, on two magnetic ultra-fine wood-based biochars were investigated in detail using batch experiments. The adsorbent materials was prepared by ball milling method, which was characterized by laser particle size analyzer, elemental analyzer, ICP-OES, VSM, BET, TG-DTG, FTIR and SEM. Furthermore, the effects of most important variables in the adsorption process, including solution pH, contact time, initial concentration and temperatures were investigated. The results exhibited that the adsorption of daptomycin was highly pH-dependent, and the capacity decreased with increasing pH. The adsorption process follows pseudo-first order and pseudo-second order models, analysis indicated that their adsorption was dominantly by physisorption. Equilibrium data were fitted well with Freundlich isotherm model, implying a multilayer adsorption. Thermodynamic parameters demonstrated that the adsorption was spontaneous, endothermic and increased randomness process. Mechanism study suggested the boundary layer diffusion was the rate limiting step.

An Overview of the Recent Progress in the Synthesis and Applications of Carbon Nanotubes

Carbon nanotubes (CNTs) are known as nano-architectured allotropes of carbon, having graphene sheets that are wrapped forming a cylindrical shape. Rolling of graphene sheets in different ways makes CNTs either metals or narrow-band semiconductors. Over the years, researchers have devoted much attention to understanding the intriguing properties CNTs. They exhibit some unusual properties like a high degree of stiffness, a large length-to-diameter ratio, and exceptional resilience, and for this reason, they are used in a variety of applications. These properties can be manipulated by controlling the diameter, chirality, wall nature, and length of CNTs which are in turn, synthesis procedure-dependent. In this review article, various synthesis methods for the production of CNTs are thoroughly elaborated. Several characterization methods are also described in the paper. The applications of CNTs in various technologically important fields are discussed in detail. Finally, future prospects of CNTs are outlined in view of their commercial applications.

Engineering nanomaterials for water and wastewater treatment: review of classifications, properties and applications

Based on their characteristics and applicability, a new category of NMs is proposed for water and wastewater treatment.