Efficient photocatalytic degradation of tetrabromodiphenyl ethers and simultaneous hydrogen production by TiO2-Cu2O composite films in N2 atmosphere: Influencing factors, kinetics and mechanism

20 years of polybrominated diphenyl ethers on toxicity assessments

Polybrominated diphenyl ethers (PBDEs) serve as brominated flame retardants which continue to receive considerable attention because of their persistence, bioaccumulation, and potential toxicity. Although PBDEs have been restricted and phased out, large amounts of commercial products containing PBDEs are still in use and discarded annually. Consequently, PBDEs added to products can be released into our surrounding environments, particularly in aquatic systems, thus posing great risks to human health. Many studies and reviews have described the possible toxic effects of PBDEs, while few studies have comprehensively summarized and analyzed the global trends of their toxicity assessment. Therefore, this study utilizes bibliometrics to evaluate the worldwide scientific output of PBDE toxicity and analyze the hotspots and future trends of this field. Firstly, the basic information including the most contributing countries/institutions, journals, co-citations, influential authors, and keywords involved in PBDE toxicity assessment will be visualized. Subsequently, the potential toxicity of PBDE exposure to diverse systems, such as endocrine, reproductive, neural, and gastrointestinal tract systems, and related toxic mechanisms will be discussed. Finally, we conclude this review by outlining the current challenges and future perspectives in environmentally relevant PBDE exposure, potential carriers for PBDE transport, the fate of PBDEs in the environment and human bodies, advanced stem cell-derived organoid models for toxicity assessment, and promising omics technologies for obtaining toxic mechanisms. This review is expected to offer systematical insights into PBDE toxicity assessments and facilitate the development of PBDE-based research.

Strategy for improvement of molecular oxygen activation capacity of PPECu by chlorine doping for water decontamination

The activation of molecular oxygen and generation of reactive oxygen species (ROS) play important roles in the efficient removal of contaminants from aqueous ecosystems. Herein, using a simple and rapid solvothermal process, we developed a chlorine-doped phenylethynylcopper (Cl/PPECu) photocatalyst and applied it to visible light degradation of sulfamethazine (SMT) in aqueous media. The Cl/PPECu was optimized to have a 2.52 times higher steady-state concentration of O2•- (3.62 × 10-5 M) and a 28.87 times higher degradation rate constant (0.2252 min-1) for SMT compared to pure PPECu. Further, the effectiveness of Cl/PPECu in treating sulfonamide antibiotics (SAs) in real water systems was verified through an investigation involving natural water bodies, SAs, and ambient sunlight. The energy band structure, DFT calculation and correlation heat map indicated that the addition of chlorine modulated the local electronic structure of PPECu, leading to an improvement in the electron-hole separation, enhanced the O2 activation, and promoted the generation of ROSs. This study not only puts forward innovative ideas for the eco-compatible remediation of environmental pollution using PPECu, but also sheds new light on the activation of oxygen through elemental doping.

Comparison of photocatalysis and photolysis of 2,2,4,4-tetrabromodiphenyl ether (BDE-47): Operational parameters, kinetic studies, and data validation using three modern machine learning models

Polybrominated diphenyl ethers (PBDEs) are halogenated organic compounds that are among the major pollutants of water, and there is an urgent need for their removal. This work compared the application of two techniques, i.e., photocatalytic reaction (PCR) and photolysis (PL), for 2,2,4,4- tetrabromodiphenyl ether (BDE-47) degradation. Although a limited degradation of BDE-47 was observed by photolysis (LED/N₂), photocatalytic oxidation by using TiO₂/LED/N₂ proved to be effective in the degradation of BDE-47. The use of a photocatalyst enhanced the extent of BDE-47 degradation by around 10% at optimum conditions in anaerobic systems. Experimental results were systematically validated through modeling with three new and powerful Machine Learning (ML) approaches, including Gradient Boosted Decision Tree (GBDT), Artificial Neural Network (ANN), and Symbolic Regression (SBR). Four statistical criteria (Coefficient of Determination (R²), Root Mean Square Error (RMSE), Average Relative Error (ARER), and Absolute Error (ABER)) were calculated for model validation. Among the applied models, the developed GBDT was the desirable model for predicting the remaining concentration (Ce) of BDE-47 for both processes. Total Organic Carbon (TOC) and Chemical Oxygen Demand (COD) results confirmed that BDE-47 mineralization required additional time than its degradation in both PCR and PL systems. The kinetic study demonstrated that BDE-47 degradation for both processes followed the pseudo-first-order form of the Langmuir-Hinshelwood (L-H) model. More importantly, the calculated electrical energy consumption of photolysis was shown to be ten percent higher than that for photocatalysis, possibly due to the higher irradiation time required in direct photolysis, which in turn increases electricity consumption. This study is useful in proposing a feasible and promising treatment process for the degradation of BDE-47.

Applications and perspectives of quaternized cellulose, chitin and chitosan: A review

Recently, increasing attention has been paid to natural polysaccharides for their low cost, biocompatibility and biodegradability. Quaternization is a modification method to improve the solubility and antibacterial ability of natural polysaccharides. Water-soluble derivatives of cellulose, chitin and chitosan offer the prospect of diverse applications in a wide range of fields, such as antibacterial products, drug delivery, wound healing, sewage treatment and ion exchange membranes. By combining the inherent properties of cellulose, chitin and chitosan with the inherent properties of the quaternary ammonium groups, new products with multiple functions and properties can be obtained. In this review, we summarized the research progress in the applications of quaternized cellulose, chitin and chitosan in recent five years. Moreover, ubiquitous challenges and personal perspectives on the further development of this promising field are also discussed.

Chemical reductive technologies for the debromination of polybrominated diphenyl ethers: A review

Polybrominated diphenyl ethers (PBDEs) are widely used as brominated flame retardants, which had attracted amounts of attention due to their harmful characteristics of high toxicity, environmental persistence and potential bioaccumulation. Many chemical reductive debromination technologies have been developed for the debromination of PBDEs, including photolysis, photocatalysis, electrocatalysis, zero-valent metal reduction, chemically catalytic reduction and mechanochemical method. This review aims to provide information about the degradation thermodynamics and kinetics of PBDEs and summarize the degradation mechanisms in various systems. According to the comparative analysis, the rapid debromination to generate bromine-free products in an electron-transfer process, of which photocatalysis is a representative one, is found to be relatively difficult, because the degradation rate of PBDEs depended on the Br-rich phenyl ring with the lowest unoccupied molecular orbital (LUMO) localization. On the contrary, the complete debromination occurs easily in other systems with active hydrogen atoms as the main reactive species, such as chemically catalytic reduction systems. The review provides the knowledge on the chemical reductive technique of PBDEs, which would greatly help not only clarify the degradation mechanism but also design the more efficient system for the rapid and deep debromination of PBDEs in the future.

Current progress in degradation and removal methods of polybrominated diphenyl ethers from water and soil: A review

The widespread of polybrominated diphenyl ethers (PBDEs) in the environment has caused rising concerns, and it is an urgent endeavor to find a proper way for PBDEs remediation. Various techniques such as adsorption, hydrothermal and thermal treatment, photolysis, photocatalytic degradation, reductive debromination, advanced oxidation processes (AOPs) and biological degradation have been developed for PBDEs decontamination. A comprehensive review of different PBDEs remediation techniques is urgently needed. This work focused on the environmental source and occurrence of PBDEs, their removal and degradation methods from water and soil, and prospects for PBDEs remediation techniques. According to the up-to-date literature obtained from Web of Science, it could be concluded that (i) photocatalysis and photocatalytic degradation is the most widely reported method for PBDEs remediation, (ii) BDE-47 and BDE-209 are the most investigated PBDE congeners, (iii) considering the recalcitrance nature of PBDEs and more toxic intermediates could be generated because of incomplete degradation, the combination of different techniques is the most potential solution for PBDEs removal, (iv) further researches about the development of novel and effective PBDEs remediation techniques are still needed. This review provides the latest knowledge on PBDEs remediation techniques, as well as future research needs according to the up-to-date literature.

Efficient removal of 2,2',4,4'-tetrabromodiphenyl ether with a Z-scheme Cu2O-(rGO-TiO2) photocatalyst under sunlight irradiation

Z-scheme Cu₂O-(rGO-TiO₂) photocatalyst was successfully synthesized via a simple three-step approach for 2,2',4,4'-tretrabromodiphenyl ether (BDE47) reductive removal under simulated solar irradiation. Unlike the traditional heterojunction, the addition of reduced graphene oxide (rGO) enhanced the redox ability of Cu₂O-TiO₂ by increasing charge transfer. When modifying Cu₂O films by adding 1% rGO and coating with 70% TiO₂, the resulting Cu₂O-(rGO-TiO₂) exhibited the best photocatalytic activity for BDE47 removal. The charge transfers of Cu₂O-(rGO-TiO₂) were proven to follow a Z-scheme pathway through the electron paramagnetic resonance analysis. The degradation pathways of BDE47 were elucidated by identifying intermediate products via gas chromatography-mass spectrometry (GC-MS) and gas chromatography (GC). Photo-electrons (e^-) generated from the conduction band of Cu₂O and hydrogen protons (H⁰) reduced from H⁺ in water were the main contributing elements for the removal of BDE47, which response to the ortho and para debromination. Ortho-Br of BDE47 was attacked by e^- and BDE28 was the dominant debromination product on the first stage. Then e^- and H⁰ attacked ortho-Br and para-Br of BDE28 to form BDE15 and BDE8, respectively. The concentration of BDE8 was higher than that of BDE15, suggesting that H⁰ played the most important role on the second debromination stage. An effective Cu₂O-(rGO-TiO₂)-based Z-scheme system for BDE47 debromination was proposed in this study, which may contribute to the development of novel green technologies.

Recent Achievements in Development of TiO2-Based Composite Photocatalytic Materials for Solar Driven Water Purification and Water Splitting

Clean water and the increased use of renewable energy are considered to be two of the main goals in the effort to achieve a sustainable living environment. The fulfillment of these goals may include the use of solar-driven photocatalytic processes that are found to be quite effective in water purification, as well as hydrogen generation. H2 production by water splitting and photocatalytic degradation of organic pollutants in water both rely on the formation of electron/hole (e-/h+) pairs at a semiconducting material upon its excitation by light with sufficient photon energy. Most of the photocatalytic studies involve the use of TiO2 and well-suited model compounds, either as sacrificial agents or pollutants. However, the wider application of this technology requires the harvesting of a broader spectrum of solar irradiation and the suppression of the recombination of photogenerated charge carriers. These limitations can be overcome by the use of different strategies, among which the focus is put on the creation of heterojunctions with another narrow bandgap semiconductor, which can provide high response in the visible light region. In this review paper, we report the most recent advances in the application of TiO2 based heterojunction (semiconductor-semiconductor) composites for photocatalytic water treatment and water splitting. This review article is subdivided into two major parts, namely Photocatalytic water treatment and Photocatalytic water splitting, to give a thorough examination of all achieved progress. The first part provides an overview on photocatalytic degradation mechanism principles, followed by the most recent applications for photocatalytic degradation and mineralization of contaminants of emerging concern (CEC), such as pharmaceuticals and pesticides with a critical insight into removal mechanism, while the second part focuses on fabrication of TiO2-based heterojunctions with carbon-based materials, transition metal oxides, transition metal chalcogenides, and multiple composites that were made of three or more semiconductor materials for photocatalytic water splitting.

Highly enhanced photocatalytic H2 evolution of Cu2O microcube by coupling with TiO2 nanoparticles

A Cu₂O/TiO₂ p-n heterojunction composite was created via a facile, controllable, one-pot hydrothermal method based on cubic Cu₂O and TiO₂ nanoparticles in the presence of dioctyl sulfosuccinate sodium salt (AOT) surfactant. The TiO₂ nanoparticles with an average edge length of ∼10.1 nm were uniformly distributed on the crystal surface of a Cu₂O cube {100}. The photocatalytic performance of the composite was effectively tuned by controlling the amount of TiO₂. The Cu₂O/TiO₂ (60 wt%, labeled as CT-60) exhibits the highest enhanced photocatalytic activity in hydrogen production with H₂ evolution of 3002.5 μmol g^-1. The yield remained around 92.6% after three cycles. Hydrogen production of the CT-60 is 103 and 8.5 fold higher than the cubic Cu₂O and TiO₂ nanoparticles, respectively. The improvement in photocatalytic performance could be attributed to the formation of p-n heterojunction. Furthermore, the interface effect of Cu₂O and TiO₂ caused a broader absorbance in the visible-light region and the lower recombination of photogenerated electron-hole pairs. It is believed that the Cu₂O/TiO₂ p-n heterojunction composites could provide an alternative method to design highly efficient photocatalysts for solar energy.

Porous Eleocharis@MnPE Layered Hybrid for Synergistic Adsorption and Catalytic Biodegradation of Toxic Azo Dyes from Industrial Wastewater

The effective treatment of industrial wastewater to protect freshwater reserves for the survival of life is a primary focus of current research. Herein, a multicomponent Eleocharis-manganese peroxidase enzyme (Eleocharis@MnPE) layered hybrid with high surface area (1200 m²/m³), with a strong synergistic adsorption and catalytic biodegradation (SACB), has been developed through a facile method. A combination of outer porous (Eleocharis) and inner catalytically active (MnPE) components of the hybrid resulted in highly efficient SACB system, evidenced by high removal rate of 15 kg m^-3 day^-1 (100%) and complete degradation of toxic Orange II (OR) azo dye into nontoxic products (gases and weak acids). The Eleocharis@MnPE layered hybrid efficiently degraded both OR in synthetic wastewater and also other azo dyes (red, pink, and yellow dyes) present in three different textile industrial effluents. For the industrial effluents, these were evidenced by the color disappearance and reduction in biological oxygen demand (BOD), chemical oxygen demand (COD), and total organic carbon (TOC) of up to 97%, 92%, and 76%, respectively. Furthermore, reduced toxicity of treated wastewater was confirmed by decreased cell toxicity to 0.1%-1% and increased cell viability to 90%. We believe that designing a hybrid system with strong ability of SACB could be highly effective for industrial-scale treatment of wastewater.

Photocatalytic Hydrogen Evolution via Water Splitting: A Short Review

Photocatalytic H2 generation via water splitting is increasingly gaining attention as a viable alternative for improving the performance of H2 production for solar energy conversion. Many methods were developed to enhance photocatalyst efficiency, primarily by modifying its morphology, crystallization, and electrical properties. Here, we summarize recent achievements in the synthesis and application of various photocatalysts. The rational design of novel photocatalysts was achieved using various strategies, and the applications of novel materials for H2 production are displayed herein. Meanwhile, the challenges and prospects for the future development of H2-producing photocatalysts are also summarized.

Preparation and performance of Cu2O/TiO2 nanocomposite thin film and photocatalytic degradation of Rhodamine B

A constant current electrodeposition approach was employed to prepare Cu₂O/TiO₂ nanocomposite thin film. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Raman, ultraviolet visible light spectrophotometer (UV-Vis), and photoluminescence (PL) measurements were used to characterize and analyze the thin film microstructure, surface morphology, and photoelectric properties. The effect of annealing treatment on the thin film properties is discussed. The response surface methodology (RSM) was employed to optimize the Rhodamine B (RhB) photocatalytic degradation by thin films, and the quadratic multinomial mathematical model was established. The photocatalytic degradation process of RhB was also studied. The results indicate that the prepared Cu₂O thin film was of high purity, with a (111) crystal plane preferred orientation. The average particle diameter was approximately 100-200 nm, and the absorbing boundary was approximately 600 nm. After annealing treatment, the absorbing boundary and open-circuit voltage increased, and Cu₂O thin film exhibited an obvious absorbance response in the visible-light range. The established model has better fitness and higher reliability, and the R² value of established quadratic model is 0.9818. The optimal degradation conditions were obtained by RSM. Under optimum conditions, the RhB degradation rate could reach 98.4% in 3 h and the total organic carbon (TOC) removal rate was 48.2%. Recycling results reveal that RhB degradation rate can still reach 94.5% after eight cycles.

Synthesis of a TiO2–Cu2O composite catalyst with enhanced visible light photocatalytic activity for gas-phase toluene

(1) A TiO₂–Cu₂O photocatalyst composite was formed by the growth of Cu₂O on a TiO₂ nucleus. (2) A p–n heterojunction is formed at the junction of TiO₂ and Cu₂O and reduces the forbidden bandgap. (3) The degradation rate of 171.6 mg m⁻³ of gaseous toluene in visible light within 3 h is greatly improved by TiO₂–Cu₂O.