Multi-functional magnetic water purifier for disinfection and removal of dyes and metal ions with superior reusability

Synthesis, characterization, and reusability of novel nanobiocomposite of endophytic fungus Aspergillus flavus and magnetic nanoparticles (Fe3O4) with dye bioremediation potential

The incorrect disposal of textile dyes, such as Reactive Black 5 (RB5), causes several problems for living beings and the quality of the environment. Nanobiocomposites (NBC) produced from endophytic fungi (potentially remediation dyes-agents) and magnetic nanoparticles have high biotechnological potential due to their superparamagnetic behavior, which would allow their recovery through the magnetic field after the bioremediation process. This work aimed to obtain a new nanobiocomposite from the interaction of magnetite nanoparticles (Fe3O4) with the endophyte Aspergillus flavus (Af-CL-7) to evaluate its bioremediation capacity and to reduce the toxicity of RB5 and its reuse. Before obtaining the NBC, Af-CL-7 showed discoloration of RB5 and it was tolerant to all tested concentrations of this dye. The discovery of the nanobiocomposite textile dye bioremediator product presents a significant environmental advantage by addressing the issue of water pollution caused by textile dyes. The NBC called Af-Fe3O4 was successfully obtained with the magnetized endophyte, and their magnetic properties were verified by VSM analysis and by action of magnetic fields generated by Nd-Fe-B magnets SEM analyzes showed that the nanoparticles did not cause any damage to the hypha morphology, and TEM analyzes confirmed the presence of nanoparticles in the fungus wall and also inside the cell. The NBC Af-Fe3O4 and Af-CL-7 showed, respectively, 96.1% and 92.2% of RB5 discoloration in the first use, 91.1% e 86.2% of discoloration in the validation test, and 89.0% in NBC reuse. In the toxicological bioassay with Lactuca sativa seeds, NBC showed a positive reduction in the toxicity of RB5 after treatment, allowing the hypocotyl growth to be statistically similar to the control with water. Thus, we highlight the promising obtaining process of NBC that could be applied in bioremediation of contaminated waters, wherein the industrial economic cost will depend on the fermentation efficiency, biomass production and nanoparticle synthesis.

Porous pillararene-based polymer as adsorbent and solid disinfectant for water treatment

Pillararene polymers have been widely used as excellent adsorbents for water treatment, but pillararene polymers with ultra-high specific surface area and versatility are still rarely reported. Herein, a quaternary ammonium salt modified pillar [5] arene polymer, QPBP [5], with specific surface area of 1844 m2 g-1 was successfully synthesized. Since QPBP [5] has abundant different adsorption sites, it exhibits excellent performance for the simultaneously removal of organic pollutants with different charges from water. The selected three model pollutants, Rhodamine B (RhB, positively charged), Sulfamethazine (SMT, electrically neutral) and Fulvic acid (FA, negatively charged), could be rapidly and efficiently removed from water by QPBP [5] within 10 min, which are much faster than them by most of the reported adsorbents. RhB and SMT are mainly adsorbed through hydrophobic interactions with the QPBP [5] surface, while FA is mainly removed through ion exchange. In addition, QPBP [5] also showed excellent reusability and adsorption performance for the environmentally relevant concentration of pollutants. Furthermore, the quaternary ammonium groups on QPBP [5] makes it a solid disinfectant with excellent antibacterial properties. In conclusion, QPBP [5] is a promising multifunctional adsorbent for the treatment of complex pollutants in water.

Bioinspired Synthesis of Silver Nanoparticles for the Remediation of Toxic Pollutants and Enhanced Antibacterial Activity

This research presents a novel and environmentally friendly approach for the synthesis of multifunctional nanobiocomposites for the efficient removal of toxic heavy metal and dye, as well as the disinfection of wastewater microorganisms. The nanobiocomposites (KAC-CS-AgNPs) were prepared by incorporating photochemically generated silver nanoparticles (AgNPs) within a chitosan (CS)-modified, high-surface-area activated carbon derived from kenaf (KAC), using a unique self-activation method. The even distribution of AgNPs was visible in the scanning electron microscopy images and a Fourier transform infra red study demonstrated major absorption peaks. The experimental results revealed that KA-CS-AgNPs exhibited exceptional adsorption efficiency for copper (Cu²⁺), lead (Pb²⁺), and Congo Red dye (CR), and showed potent antibacterial activity against Staphylococcus aureus and Escherichia coli. The maximum adsorption capacity (mg g^-1) of KAC-CS-AgNPs was 71.5 for Cu²⁺, 72.3 for Pb²⁺, and 75.9 for CR, and the adsorption phenomena followed on the Freundlich and Langmuir isotherm models and the second-order kinetic model (R² > 0.99). KAC-CS-AgNPs also exhibited excellent reusability of up to four consecutive cycles with minor losses in adsorption ability. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The bacterial inactivation tests demonstrated that KAC-CS-AgNPs had a strong bactericidal effect on both E. coli and S. aureus, with MIC calculated for E. coli and S. aureus as 32 µg mL^-1 and 44 µg mL^-1, respectively. The synthesized bioinspired nanocomposite KAC-CS-AgNPs could be an innovative solution for effective and sustainable wastewater treatment and has great potential for commercial applications.

Dual-functional calcium alginate hydrogel beads for disinfection control and removal of dyes in water

For the decontamination of both pathogenic microorganism and toxic dye from wastewater, new type of materials should be exploited to fabricate more cost-effective, eco-friendly biosorbent. Herein, a promising hydrogel beads based on the incorporation of nano‑silver/diatomite into calcium alginate (named as Ag-DE@CAH) was designed to disinfect water and remove methylene blue (MB). Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM), etc. were utilized for characterization analysis. Compared with nano‑silver/diatomite (Ag-DE), the novel Ag-DE@CAH beads displayed a better sustained release profile for Ag⁺, and it noteworthy that the concentration of Ag⁺ in aqueous media is below the limit of the World Health Organization (WHO) standard (100 ppb) for a 30-days release experiment. It was found that Ag-DE@CAH beads exhibited better disinfection ability towards Escherichia coli (E. coli) than Staphylococcus aureus (S. aureus), and the maximum adsorption capacities of Ag-DE@CAH for MB was 128.21 mg/g. In addition, the as-prepared Ag-DE@CAH beads showed superior and reusable performance in the process of adsorption experiments for MB. Overall, the study indicates that the materials with both excellent disinfection and adsorption properties have potential application prospects for water purification.

Versatile 3D reduced graphene oxide/poly(amino-phosphonic acid) aerogel derived from waste acrylic fibers as an efficient adsorbent for water purification

The fabrication of multifunctional materials to remove soluble heavy metal ions and dyes, as well as insoluble oils from waste water is urgently required, yet remains a daunting challenge because of difficulty in controlling their structure and property to satisfy various demands. Herein, for the first time, novel 3D reduced graphene oxide/poly(amino-phosphonic acid) (PAPA) aerogels (rGO/PAPAs) with different PAPA content were developed by solvothermal reduction of the graphene oxide and cross-linking with PAPA chain, and subsequently employed as versatile adsorbent for the removal of complex pollutants such as Cr(III) ion, methylene blue (MB) dye and various kinds of organic solvents from water. Benefiting from the synergistic effect of the reduced graphene oxide (rGO) sheet and PAPA component, as well as its unique 3D structure, the resultant aerogel (rGO/PAPA-2) gained amphiphilic, ultralight, and multifunctional properties. Thus, it showed a fast adsorption rate (within 15 min) and high adsorption capacity (up to 327.1 mg/g) for Cr(III) ion at an optimal pH of 5.5 due to its unique 3D network structure with abundant amino-phosphonic acid functional groups. The uptake of Cr(III) by rGO/PAPA-2 was fitted well with the Langmuir isotherm and pseudo-second-order kinetic model. The adsorption mechanism of Cr(III) onto rGO/PAPA-2 can be attributed to electrostatic attraction and surface complexation with APA groups. In addition, the rGO/PAPA-2 displayed an excellent adsorption performance for MB (694.5 mg/g) and several organic solvents (83.2 to 254.3 g/g). Moreover, the rGO/PAPA-2 exhibited a good regeneration (around 99%) and satisfactory recovery abilities for the tested adsorbates. Notably, PAPA chains can be easily prepared from waste acrylic fibers, making it become a cost effective but versatile candidate to prepare new material. Therefore, this work provides a new design strategy to fabricate the rGO/PAPA-2 aerogel with great prospect for sophisticated industrial wastewater cleanup.

Characterizations and fluoride adsorption performance of wattle humus biosorbent

Considering the serious health effects of fluoride contamination, an environment friendly bioadsorbent was derived from wattle humus for fluoride removal by conventional thermal activation process. Analytical characterizations revealed that heterogeneous morphological textured wattle humus enabled remarkable adsorption capacity. XPS analysis substantiated that fluoride had been successfully adsorbed on to the carbonized wattle humus surface through chemisorption. Fluoride adsorption efficiency was systematically rationalized via batch adsorption studies. Experiments were performed at different initial fluoride concentration and scrutinized the impact of contact time (10-120 min), adsorbent dosage (0.5-2.5 g), pH (2.0-9.0), and interfering co-existing ions (SO₄^2-, NO₃^-, Cl^-, and HCO₃^-) on fluoride removal. Even at different adsorbate dosage (2-10 mg/L), 98% fluoride removal efficiency was achieved under pH > 6. The competitive anions do not interfere the wattle humus fluoride adsorption capacity. Moreover, the adsorption isotherms and kinetics studies inferred that monolayer and multilayer adsorption behavior by wattle humus leads to noticeable fluoride adsorption. Adsorbent regeneration test affirms that regenerated adsorbent found higher (>95%) fluoride removal efficiency even at five recycle runs.

Mechanistic understanding of highly selective adsorption of bisphenols on microporous-dominated nitrogen-doped framework carbon

Producing a desirable adsorbent for removing endocrine disrupting compounds (EDCs) from aqueous solutions remains a major challenge. In this work, microporous-dominated nitrogen-doped framework carbons (MNFCs, s means the calcination temperature) with high specific surface area, ultra-microporous structure, and high nitrogen-doping can be obtained by a direct calcination of ethylene diamine tetraacetic acid tetrasodium (EDTA-4Na) without aid of any catalyst and nitrogen source. MNFCs were applied adsorbents to remove bisphenols from aqueous solution. Batch experiments showed MNFC-750 had a large adsorption capacity for bisphenols from aqueous solutions (409 mg/g for bisphenol A, 364 mg/g for bisphenol F, and 521 mg/g for bisphenol S) along with short equilibrium time (30 min), and good stability and reusability. Using multiple characterizations and comparative experiments along with theoretical calculations, we discovered that: (1) nitrogen-doping can significantly boost the adsorption capacity; (2) adsorption sites are mainly the pyridinic-N instead of pyrrolic-N and graphitic-N; and (3) the adsorption mechanisms were mainly driven by Lewis acid-base interaction, hydrophobic interaction, π-π interaction and hydrogen bond interaction. These findings indicate that MNFCs present a promising potential for practical applications and shed light on the rational design of nitrogen doped carbon-based adsorbents for efficient pollutant removal.

Film-like bacterial cellulose/cyclodextrin oligomer composites with controllable structure for the removal of various persistent organic pollutants from water

The adsorptive removal of persistent organic pollutants (POPs) is reckoned as a simple, convenient, and practical technology, especially in decentralized systems and remote areas. For this purpose, it is important to design new adsorbents, with controllable structure and convenient shape, for the highly efficient removal of POPs. In this study, we describe a strategy for film-like water purifier, prepared by loading cyclodextrin (CD) oligomer onto the ultrafine nanofibers of 3D bacterial cellulose. The optimum product exhibits remarkable removal ability toward various target pollutants such as phenol, bisphenol A (BPA), glyphosate and 2,4-Dichlorophenol (2,4-DCP), with capacities higher than most adsorbents including porous carbon based materials reported previously. Moreover, our sample demonstrated stable adsorption ability over a broad pH range and under more complex water conditions, and more importantly excellent reusability. A rough cost analysis highlights the commercial potential of our sample. We reckon our study provides new insight for the design of adsorbent with high yet stable adsorption ability and controllable structure. Furthermore, the product can be used to treat actual sewage with its convenient film-like shape and excellent performance, which improves its potential in complex systems and large-scale applications.

Multifunctional β-Cyclodextrin Polymer for Simultaneous Removal of Natural Organic Matter and Organic Micropollutants and Detrimental Microorganisms from Water

Natural organic matter (NOM), organic micropollutants (OMPs), and detrimental microorganisms are three major pollutants that affect water quality. To remove these pollutants, a quaternary ammonium-functionalized β-cyclodextrin polymer (β-CDP) is successfully synthesized in the aqueous phase. The N₂ and CO₂ adsorption/desorption analysis showed that the polymer mainly contains ultra-micropores (<1 nm), with a Langmuir surface area of 89 m² g^-1. Two kinds of NOM, humic acid and fulvic acid, and five OMPs, 2-naphthol (2-NO), 3-phenylphenol (3-PH), 2,4,6-trichlorophenol (2,4,6-TCP), bisphenol A (BPA), and bisphenol S (BPS), were selected as model pollutants to study the performance of β-CDP and three kinds of commercial adsorbents, including granular activated carbon, DARCO-AC, and two resins, XAD-4 and D-201, were used for comparison. The polymer shows ultrarapid adsorption kinetics for the removal of these pollutants, with pseudo-second-order rate constants two to three orders of magnitude higher than that of the commercial activated carbon and resins. Due to the different adsorption sites of NOM and OMPs, β-CDP can simultaneously remove these pollutants without competitive adsorption. The maximum adsorption capacity of β-CDP for HA, FA, 2-NO, 3-PH, 2,4,6-TCP, BPA, and BPS based on the Langmuir model is 40, 166, 74, 101, 108, 103, and 117 mg g^-1, respectively. After use, the polymer can be easily regenerated at room temperature. In addition, β-CDP also showed excellent bactericidal properties due to the quaternary ammonium groups. At a concentration of 15 g L^-1, β-CDP can remove 98% of the tested Escherichia coli. Moreover, the synthesis of β-CDP is simple, green, and easy to industrialize. All of these findings indicate that β-CDP, as an ideal multifunctional material, presents potential for practical applications for water treatment and disinfection.

An all-in-one strategy for the adsorption of heavy metal ions and photodegradation of organic pollutants using steel slag-derived calcium silicate hydrate

Low-cost and high-performance materials or techniques that could synergistically remove inorganic heavy metals and organic pollutants in a simple manner are highly desired. Herein, we report a simple and facile strategy by converting poisonous heavy metals into photocatalyst for the in-situ photodegradation of organic pollutants employing steel slag-derived calcium silicate hydrate (CSH). The CSH was synthesized by alkali activation method and showed hierarchical structure and amorphous phase. And, the material exhibited excellent adsorption performance towards all selected heavy metals. After adsorption, the heavy metals were converted into the corresponding amorphous metal hydroxides on the surface of CSH. The resulting CSH-supported amorphous metal hydroxides can act as visible-light photocatalysts for the photodegradation of organic pollutants. The optimal results for the whole water purification route using CSH are > 100 mg/g adsorption capacity for Cu²⁺ and ˜63% / 8 h photodegradation efficiency for methylene blue under visible light. The total cost for the whole route is < 0.1 $/g pollutants, much lower than traditional technologies. The strategy using steel slag derived-CSH not only meets the requirements for high-performance and low-cost materials, but also resolves the challenging issues of developing an all-in-one treatment for heavy metal ions and organic pollutants, which will be of great significance to wastewater purification.

Highly effective remediation of Pb(II) and Hg(II) contaminated wastewater and soil by flower-like magnetic MoS2 nanohybrid

The efficient enrichment and remediation of heavy metals from realistic wastewater and contaminated soil containing large excess of competitive ions remains a daunting challenge by far. In the present study, flower-like molybdenum disulfide decorated with iron oxide nanoparticles (MoS₂/Fe₃O₄) is designed via a two-step hydrothermal method and mainly applied in the removal of Hg(II) and Pb(II) ions in aqueous environment. Exhaustive morphological, chemical and magnetic characterizations verify the successful formation of magnetic MoS₂/Fe₃O₄. Batch adsorption experiments show that the obtained MoS₂/Fe₃O₄ nanohybrid enables efficient capture of Hg(II) and Pb(II) ions, accompanied by ease-of-separation from solution by simply applying a magnet. In this respect, high adsorption capacities (263.6 mg g^-1 for Pb(II) and 428.9 mg g^-1 for Hg(II)) can be gained under optimized conditions (pH = 5.0; 298 K; nanohybrid dosage: 0.8 g L^-1 and the contact time: 180 min). In addition, the effects of different parameters such as initial Pb(II)/Hg(II) concentration (50-500 mg L^-1), temperature (298, 308 and 318 K) and co-existing ions (Zn(II), Cu(II), Cd(II) and Mg(II)) were systematically probed. The favorable adsorption capacity, selectivity and recyclability mainly originates from the strong Hg²⁺/Pb²⁺···S^2- bonding interactions. Practical application potential of magnetic MoS₂/Fe₃O₄ nanohybrid in realistic lead-acid battery industry wastewater and Pb(II)-contaminated soil is further explored, achieving promising results with high Pb(II) removal efficiency of 99.63% for wastewater and 57.15% for soil. Simple preparation, easy separation and high adsorption capacity would foster thus-designed sulfide-based nanohybrid a promising adsorbent for heavy metal removal from wastewater and contaminated soil.

Nano-engineered Adsorbent for the Removal of Dyes from Water: A Review

Background:

The huge quantity of wastewater, containing poisonous and hazardous dyes, is released by various industries which pollute water in direct and indirect ways. Most of the dyes are a dangerous class of water contaminants which have affected the environment drastically. Some dyes such as congo red, rhodamine B, methylene blue, methyl violet, and crystal violet are a serious threat to human beings.

Remediation Method:

Numerous methods are available for the removal of dyes from water. Adsorption, being a superior and eco-friendly technique, has advantage of eliminating organic dyes because of the availability of materials as adsorbents. The inexpensive nanomaterials are a more attractive choice for remediation of various dyes due to their unique properties and offer an adequate pathway to adsorb any organic dye from water to overcome its hazardous effects on human health.

Results:

In this review, we have discussed the latest literature related to various types of synthesis, characterization and uses as adsorbent for highly adsorptive removal capacity of nanoparticles for organic dyes.

Conclusion:

Adsorption technology provides an attractive pathway for further research and improvement in more efficient nanoparticles, with higher adsorption capacity, for numerous dyes to eliminate the dyes discharged from various industries and thus reduce the contamination of water. Therefore, nanocomposites may contribute to future prospective water treatment process.

Fe-Loaded MOF-545(Fe): Peroxidase-Like Activity for Dye Degradation Dyes and High Adsorption for the Removal of Dyes from Wastewater

Methods to remove dye pollutants with natural enzyme, like horseradish peroxidase (HRP), are still limited due to high costs and low stability levels. The development of such a method with similar enzymatic activity is important and could be helpful in wastewater disposal. A metal organic framework material, Fe-loaded MOF-545 (Fe), was synthesized in our study as a new way to remove dyes due to its peroxidase-like activity. The structural characterizations of Fe-loaded MOF-545(Fe) was investigated using scanning electron microscopy (SEM), UV-Vis absorption spectra, and X-ray diffraction (XRD). The peroxidase-like (POD-like) activity of Fe-loaded MOF-545(Fe) was investigated under different pH and temperature conditions. Because of the Fe added into the MOF-545 structure, the absorption of Fe-loaded MOF-545(Fe) for acid (anionic) dyes (methyl orange (MO)) was better than for basic (cationic) dyes (methylene blue (MB)). The Fe-loaded MOF-545(Fe) could give a significant color fading for MO and MB over a short time (about two hours) with peroxidase-like activity. The remarkable capacity of Fe-loaded MOF-545(Fe) to remove the MO or MB is due to not only physical adsorption, but also degradation of the MO and MB with POD-like activity. Therefore, Fe-loaded MOF-545(Fe) has significant potential regarding dye removal from wastewater.

Simultaneous removal of pollutants from water using nanoparticles: A shift from single pollutant control to multiple pollutant control

The steady increase in population, coupled with the rapid utilization of resources and continuous development of industry and agriculture has led to excess amounts of wastewater with changes in its composition, texture, complexity and toxicity due to the diverse range of pollutants being present in wastewater. The challenges faced by wastewater treatment today are mainly with the complexity of the wastewater as it complicates treatment processes by requiring a combination of technologies, thus resulting in longer treatment times and higher operational costs. Nanotechnology opens up a novel platform that is free from secondary pollution, inexpensive and an effective way to simultaneously remove multiple pollutants from wastewater. Currently, there are a number of studies that have presented a myriad of multi-purpose/multifunctional nanoparticles that simultaneously remove multiple pollutants in water. However, these studies have not been collated to review the direction that nanoparticle assisted wastewater treatment is heading towards. Hence, this critical review explores the feasibility and efficiency of simultaneous removal of co-existing/multiple pollutants in water using nanomaterials. The discussion begins with an introduction of different classes of pollutants and their toxicity followed by an overview and highlights of current research on multipollutant control in water using different nanomaterials as adsorbents, photocatalysts, disinfectants and microbicides. The analysis is concluded with a look at the current attempts being made towards commercialization of multipollutant control/multifunctional nanotechnology inventions. The review presents evidence of simultaneous removal of pathogenic microorganisms, inorganic and organic compound chemical pollutants using nanoparticles. Accordingly, not only is nanotechnology showcased as a promising and an environmentally-friendly way to solve the limitations of current and conventional centralised water and wastewater treatment facilities but is also presented as a good substitute or supplement in areas without those facilities.

Efficient Copper Removal from an Aqueous Anvironment using a Novel and Hybrid Nanoadsorbent Based on Derived-Polyethyleneimine Linked to Silica Magnetic Nanocomposites

Due to the extreme rise of sludge pollution with heavy metals (e.g. copper), the options for its disposal or treatment are decreasing. On the contrary, properly heavy metal-cleaned sludge can be used as an alternative sustainable energy and agriculture source. The aim of this study was to develop a novel nanoadsorbent, based on irreversibly linked amino-rich polymer onto previously silica-coated magnetic nanoparticles (MNPs) that can be applied efficiently for metal removal. MNPs were coated uniformly by 3 nm thick silica layer (core-shell structure), and were additionally modified with systematic covalent attachment of derived branched polyethyleneimine (bPEI). The formed structure of synthesized MNPs composite was confirmed with several analytical techniques. Importantly, nanoadsorbents exhibit high density of chelating amino groups and large magnetic force for easier separation. The importance of introduced bPEI, effect of pH, initial heavy metal concentration onto copper uptake efficiency and, further, nanoadsorbent regeneration, were studied and explained in detail. The adsorption isotherm was well fitted with Langmuir model, and the maximum adsorption capacity was shown to be 143 mg·g¹ for Cu2+. The reusability and superior properties of silica-coated MNPs functionalized with derived-bPEI for copper adsorption underlie its potential for the removal application from heavy metals contaminated sludge.

Synthesis of γ-alumina (Al2O3) nanoparticles and their potential for use as an adsorbent in the removal of methylene blue dye from industrial wastewater

Non-toxic nanomaterials have gained significant importance recently in the treatment of industrial wastewater that sometimes contains organic dyes such as methylene blue. We report here an easy approach for the synthesis of γ-alumina (Al₂O₃) nanoparticles via a method that incorporates the use of formamide and the non-ionic surfactant Tween-80. Together, formamide and Tween-80 serve as an effective precipitating agent and a convenient synthetic template, respectively, in directing the growth of the alumina nanoparticles. The morphology and structure of the nanoparticles were investigated by FT-IR, XRD, TGA, SEM, EDX, elemental mapping and TEM methods. The sizes of the nanoparticles are in the 30-50 nm range. The maximum pore size is 4.13 nm and the surface area is 112.9 m² g^-1 as determined by the Brunauer-Emmett-Teller (BET) method. The nanomaterials are excellent adsorbents for the cationic methylene blue dye from aqueous solution. The effects of pH, time, temperature and concentration on the adsorption have been examined and the adsorption capacity increased from 490 to 2210 mg g^-1 as the initial concentration was increased from 50 to 400 mg L^-1 under the following conditions: pH 9, 10 min reaction time, and 60 °C. The adsorption mechanism is considered to encompass electrostatic interactions in water between the Al₂O₃ nanoparticles and the cationic methylene blue dye. These readily made nanoparticles may well prove useful in both wastewater treatment and industrial catalysis.