Constructing Cd0.5Zn0.5S@ZIF-8 nanocomposites through self-assembly strategy to enhance Cr(VI) photocatalytic reduction

Metal organic framework anchored onto biowaste mediated carbon material (rGO) for remediation of chromium (VI) by the photocatalytic process

Groundwater contaminated with hexavalent chromium Cr(VI) causes serious health concerns for the ecosystem. In this study, a hybrid amino functionalized MOF@rGO nanocatalyst was produced by utilization of a biowaste mediated carbon material (reduced graphene oxide; rGO) and its surface was modified by in situ synthesis of a nanocrystalline, mixed ligand octahedral MOF containing iron metal and NH2 functional groups and the prepared composite was investigated for Cr (VI) removal. The photocatalytic degradation of Cr(VI) in aqueous solutions was carried out under UV irradiation. Using a batch mode system, the effect of numerous control variables was examined, and the process design and optimization were carried out by response surface methodology (RSM). The photocatalyst, NH2-MIL(53)-Fe@rGO, was intended to be a stable and highly effective nanocatalyst throughout the recycling tests. XRD, SEM, EDS, FTIR examinations were exploited to discover more about surface carbon embedded with MOF. 2 g/L of NH2-MIL-53(Fe)/rGO was utilized in degrading 200 mg/L of Cr(VI) in just 100 min, implying the selective efficacy of such a MOF-rGO nanocatalyst. Moreover, the Eg determinations well agreed with the predicted range of 2.7 eV, confirming its possibility to be exploited underneath visible light, via the Tauc plot. Thus, MOF anchored onto biowaste derived rGO photo-catalyst was successfully implemented in chromium degradation.

Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress

Metal-organic frameworks (MOFs) have emerged as highly promising adsorbents for removing heavy metals from wastewater due to their tunable structures, high surface areas, and exceptional adsorption capacities. This review meticulously examines and summarizes recent advancements in producing and utilizing MOF-based adsorbents for sequestering heavy metal ions from water. It begins by outlining and contrasting commonly employed methods for synthesizing MOFs, such as solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical. Rather than delving into the specifics of adsorption process parameters, the focus shifts to analyzing the adsorption capabilities and underlying mechanisms against critical metal(loid) ions like chromium, arsenic, lead, cadmium, and mercury under various environmental conditions. Additionally, this article discusses strategies to optimize MOF performance, scale-up production, and address environmental implications. The comprehensive review aims to enhance the understanding of MOF-based adsorption for heavy metal remediation and stimulate further research in this critical field. In brief, this review article presents a comprehensive overview of the contemporary information on MOFs as an effective adsorbent and the challenges being faced by these adsorbents for heavy metal mitigation (including stability, cost, environmental issues, and optimization), targeting to develop a vital reference for future MOF research.

A critical review on the separation of heavy metal(loid)s from the contaminated water using various agricultural wastes

Wastewater contamination with heavy metal(loids)s has become a worldwide environmental and public health problem due to their toxic and non-degradable nature. Different methods and technologies have been applied for water/wastewater treatment to mitigate heavy metal(loid)-induced toxicity threat to humans. Among various treatment methods, adsorption is considered the most attractive method because of its high ability and efficiency to remove contaminants from wastewater. Agricultural waste-based adsorbents have gained great attention because of high efficiency to heavy metal(loids)s removal from contaminated water. Chemically modified biosorbents can significantly enhance the stability and adsorption ability of the sorbents. The two mathematical models of sorption, Freundlich and Langmuir isotherm models, have mostly been studied. In kinetic modeling, pseudo-second-order model proved better in most of the studies compared to pseudo-first-order model. The ion exchange and electrostatic attraction are the main mechanisms for adsorption of heavy metal(loid)s on biosorbents. The regeneration has allowed various biosorbents to be recycled and reused up to 4-5 time. Most effective eluents used for regeneration are dilute acids. For practical perspective, biosorbent removal efficiency has been elucidated using various types of wastewater and economic analysis studies. Economic analysis of adsorption process using agricultural waste-based biosorbents proved this approach cheaper compared to traditional commercial adsorbents, such as chemically activated carbon. The review also highlights key research gaps to advance the scope and application of waste peels for the remediation of heavy metal(loid)s-contaminated wastewater.

Parameter Influence, Characterization and Adsorption Mechanism Studies of Alkaline-Hydrolyzed Garcinia kola Hull Particles for Cr(VI) Sequestration

Despite the regulations by The World Health Organization (WHO) on the permissible limit of chromium, many industries still discharge wastewater polluted with chromium into the environment irrationally. This poses a lot of risk to aquatic lives and humans because of its carcinogenic and toxic attributes. Thus, treatment of industrial wastewater polluted with chromium is highly imperative before its disposal. Nonetheless, the hulls generated from Garcinia kola in our various farmlands also causes environmental pollution when dumped unknowingly. In this present study, Garcinia kola hull particles (GK-HP) was hydrolyzed using NaOH and applied as adsorbent for Cr(VI) sequestration. The raw Garcinia kola hull particles (rGK-HP) and modified Garcinia kola hull particles (cMGK-HP) were characterized using Brunauer-Emmett-Teller (BET) method, scanning electron microscopy (SEM), powder X-ray diffractometry (XRD), Fourier-Transform-Infrared (FTIR), thermogravimetric analysis (TGA), energy dispersive spectroscopy (EDS) and point of zero charge (pHpzc). The influence of pH, adsorbent dose, contact time, temperature and adsorbate initial concentration on Cr(VI) sequestration were examined. The cMGK-HP was able to remove 96.25% of Cr(VI) from solution and proved to be effective than rGK-HP. The amount of Cr(VI) removed from solution decreased as the pH and adsorbate initial concentration were increased. However, the amount increased as the adsorbent dose, contact time and temperature were increased. Change in morphological structure, textural property, spectral peak, phase composition and adsorbents chemical composition before and after Cr(VI) sequestration from solution were proved by SEM, BET, FTIR, XRD, and EDS analyses respectively. The isotherm and kinetic studies suggest Cr(VI) adsorption on adsorbents' surface to be monolayer in nature and adsorption data to be well-fitted into pseudo second order model respectively. The cMGK-HP possessed excellent reusability attribute and high thermal stability as shown by TGA. In conclusion, cMGK-HP could effectively be used as an adsorbent for Cr(VI) sequestration from solution.

Robust and highly reactive membranes for continuous disposal of chemical warfare agents: Effects of nanostructure and functionality in MOF and nanochitin aerogel composites

Developing appropriate disposal of stockpiles of chemical warfare agents (CWAs) has gained significant attention as their lethal toxicity seriously harms humanity. In this study, a novel green-fabrication method with UiO-66 catalysts and amine-functionalized chitin nanofibers (ChNFs) was suggested to prepare durable and highly reactive membranes for decomposing chemical warfare agents (CWAs) in the continuous flow system. The strong interaction between ChNFs and the UiO-66 led to stable loading of the UiO-66 on the continuous nano-porous channel of the ChNF reactive membrane even with high loading of UiO-66 (70 wt% of UiO-66 in the ChNF substrate). In addition, the Brønsted base functionalities (-NH2 and -NHCOCH3) of the ChNF enhanced the catalytic activity and recyclability of the UiO-66. The resulting 70-ChNF composites can effectively decompose a nerve agent simulant (methyl paraoxon) even after 7 repeatable cycles, which has been not obtained in the previous UiO-66 catalyst. The ChNF/UiO-66 reactive membranes with 1 m2 of the area decomposed 130 g of CWAs within an hour in a continuous flow system. We believe these robust and highly reactive membranes can provide a sustainable and efficient solution for the massive CWA disposal and also contribute to the advancement of functional membrane material science.

Twin Zn1- x Cdx S Solid Solution: Highly Efficient Photocatalyst for Water Splitting

Twins in crystal defect, one of the significant factors affecting the physicochemical properties of semiconductor materials, are applied in catalytic conversion. Among the catalysts serving for photocatalytic water splitting, Zn1- x Cdx S has become a hot-point due to its adjustable energy band structure. Via limiting mass transport to control the release rate of anions/cations, twin Zn1- x Cdx S solid solution is prepared successfully, which lays a foundation for the construction of other twin crystals in the future. On twin Zn1- x Cdx S, water tends to be dissociated after being adsorbed by Zn2+ /Cd2+ at twin boundary, then the fast-moving electrons at twin boundary quickly combine with the protons already attached to S2- to form hydrogen. According to the theoretical calculation, not only the intracrystalline electron mobility, but also the extracrystalline capacity of water-adsorption/dissociation and proton-adsorption on the twin boundary are superior to those of the counterpart plane in defect-free phase. The synthetic twin Zn1- x Cdx S apparent quantum efficiency of photocatalysis water splitting for hydrogen reached 82.5% (λ = 420 nm). This research opens up an avenue to introduce twins in crystals and it hopes to shed some light on photocatalysis.

Conductive Polymer-Inorganic Polythiophene/Cd0.5Zn0.5S Heterojunction with Apace Charge Separation and Strong Light Absorption for Boosting Photocatalytic Activity

In order to utilize the synergistic effect between a conductive polymer and an inorganic semiconductor to efficaciously enhance charge transfer and solve the problem of unsatisfactory performance of a single photocatalyst, thiophene (Th) was polymerized on the Cd0.5Zn0.5S nanoparticle surface to prepare a conductive polymer-inorganic polythiophene/Cd0.5Zn0.5S (PTh/CZS) heterostructrue through a simple in situ oxidation polymerization for the first time. The as-prepared PTh/CZS heterostructures significantly improved photocatalytic TCH degradation and hydrogen production activities. Especially, the 15PTh/CZS sample exhibited the optimal hydrogen production rate (18.45 mmol g-1 h-1), which was 2.51 times higher than pure Cd0.5Zn0.5S nanoparticles. In addition, 15PTh/CZS also showed very fast and efficient photodegradation ability for degrading 88% of TCH in 25 min. Moreover, the degradation rate (0.06229 min-1) was five times more than that of Cd0.5Zn0.5S. The π-π* transition characteristics, high optical absorption coefficient, wide absorption wavelength of PTh, the tight contact interface, and synergistic effect of PTh and Cd0.5Zn0.5S efficiently boosted charge transfer rate and increased the light absorption of PTh/CZS photocatalysts, which greatly enhanced the photocatalytic abilities. Besides, the mechanism of improved photocatalytic activities for TCH degradation and H2 production was also carefully proposed. Undoubtedly, this work would provide new insights into coupling conductive polymers to inorganic photocatalysts for achieving multifunctional applications in the field of photocatalysis.

Efficient Cr(VI) sequestration from aqueous solution by chemically modified Garcinia kola hull particles: characterization, isotherm, kinetic, and thermodynamic studies

There is a need for the removal of hexavalent chromium from contaminated water prior to its discharge into the environment, as part of industrial effluents, due to its toxic nature. In this present study, an adsorbent prepared via chemical modification of Garcinia kola hull particles (GK-HP) using NaOH was applied for Cr(VI) sequestration from aqueous solution. Both the raw (rGK-HP) and chemically modified Garcinia kola hull particles (cMGK-HP) were characterized using BET, SEM, XRD, FTIR, TGA, and EDS. The effects of pH, contact time, adsorbent dose, adsorbate initial concentration, and temperature on Cr(VI) sequestration were examined. The adsorbent, cMGK-HP, proved to be more effective for the adsorption process than rGK-HP with 96.25% removal efficiency at a pH of 2, a contact time of 60 min, an adsorbent dose of 5 g/L, Cr(VI) initial concentration of 20 mg/L and a temperature of 40°C. Isotherm and kinetic studies showed experimental data to be well-fitted with Langmuir isotherm and follow the pseudo-second-order kinetic model. The thermodynamic study revealed adsorption nature to be feasible, occur via physisorption, spontaneous, and exothermic. Changes in morphological structure, textural property, spectral peak, phase composition, and chemical composition of adsorbents before and after Cr(VI) sequestration from solution were proved by SEM, BET, FTIR, XRD, and EDS analyses, respectively. cMGK-HP possessed excellent reusability attribute and high thermal stability as shown by TGA. In conclusion, the adsorption capacity of cMGK-HP is better than many other adsorbents generated from agrowastes used in previous studies for Cr(VI) removal.

Construction of UiO-66-NH2 decorated by MoS2 QDs as photocatalyst for rapid and effective visible-light driven Cr(VI) reduction

The photoactive metal-organic frameworks (MOFs) are good candidates for photocatalysts, but the quick electron-hole pairs recombination has greatly restricted the photocatalytic ability of MOFs. To improve the photoactivity of MOFs, MOFs-based composite materials have been extensively studied. Here, we successfully integrated MoS2 quantum dots (QDs) with UiO-66-NH2 for the first time under hydrothermal conditions. The as-prepared MoS2 QDs/UiO-66-NH2 (MS-U) had good visible light response ability (absorption edge at 445 nm), and charge separation and transfer ability, which lays the foundation for the photocatalytic Cr(VI) reduction. Photocatalytic studies revealed that MoS2 QDs-5/UiO-66-NH2 (MS-U-5) had superior Cr(VI) reduction activity than pure MoS2 QDs and UiO-66-NH2. MS-U-5 could remove 98% Cr(VI) at pH= 2 with visible light irradiation for 20 min, which is the fastest visible light driven Cr(VI) reduction rate among the reported MOFs-based composite photocatalysts without the presence of any cocatalysts or scavengers as far as we know. Importantly, MS-U-5 could be reused at least three times. In the end, the possible electron transfer path and mechanism of Cr(VI) reduction was also investigated.

A novel MIL-125(Ti)-based nanocomposite for enhanced adsorption and catalytic degradation of tetracycline hydrochloride: Synergetic mechanism of calcination and the nitrogen-containing reticulated surface layer

A multi-nitrogen conjugated organic molecule (TPE-2Py) was selected to surface modify the calcined MIL-125(Ti) to prepare a nanocomposite (TPE-2Py@DSMIL-125(Ti)) for adsorption and photodegradation of organic pollutant (tetracycline hydrochloride) under visible light. A novel reticulated surface layer was formed on the nanocomposite, and the adsorption capacity of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can reach 157.7 mg/g under neutral conditions, which is higher than that of most other reported materials. Kinetic and thermodynamic studies show that the adsorption is a spontaneous heat absorption process, dominated by chemisorption, in which electrostatic interaction, π-π conjugation and Ti-N covalent bonds played dominant roles. The photocatalytic study shows that the visible photo-degradation efficiency of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can further reach 89.1% after adsorption. Mechanism studies reveal that •O₂^- and h⁺ play a major role in the degradation process, and the separation and transfer rate of photo-generated carriers increase, improving its visible photocatalytic performance. This study revealed the relationship between the adsorption/photocatalytic properties of the nanocomposite and the structure of the molecular as well as the calcination, providing a convenient strategy to regulate the removal efficiency of MOFs materials towards organic pollutants. Furthermore, TPE-2Py@DSMIL-125(Ti) exhibits good reusability and even better removal efficiency for tetracycline hydrochloride in real water samples, indicating its sustainable treatment of pollutants in contaminated water.

Near- and Long-Range Electronic Modulation of Single Metal Sites to Boost CO2 Electrocatalytic Reduction

Tuning the electronic structure of the active center is effective to improve the intrinsic activity of single-atom catalysts but the realization of precise regulation remains challenging. Herein, a strategy of "synergistically near- and long-range regulation" is reported to effectively modulate the electronic structure of single-atom sites. ZnN₄ sites decorated with axial sulfur ligand in the first coordination and surrounded phosphorus atoms in the carbon matrix are successfully constructed in the hollow carbon supports (ZnN₄ S₁ /P-HC). ZnN₄ S₁ /P-HC exhibits excellent performance for CO₂ reduction reaction (CO₂ RR) with a Faraday efficiency of CO close to 100%. The coupling of the CO₂ RR with thermodynamically favorable hydrazine oxidation reaction to replace oxygen evolution reaction in a two-electrode electrolyzer can greatly lower the cell voltage by 0.92 V at a current density of 5 mA cm^-2 , theoretically saving 46% of energy consumption. Theoretical calculation reveals that the near-range regulation with axial thiophene-S ligand and long-range regulation with neighboring P atoms can synergistically lead to the increase of electron localization around the Zn sites, which strengthens the adsorption of *COOH intermediate and therefore boosts the CO₂ RR.

High hydrophobic ZIF-8@cellulose nanofibers/chitosan double network aerogel for oil adsorbent and oil/water separation

Ultralight aerogels with low bulk density, highly porous nature, and functional performance have received significant focus in the field of water pollution treatment. Here, high-crystallinity, large surface-aera metal frame-work (ZIF-8) was efficiently utilized to assist in the preparation of ultralight yet highly oil and organic solvent adsorption capacity, double-network cellulose nanofibers/chitosan-based aerogels through a physical entanglement and scalable freeze-drying approach. After chemical vapor deposition with methyltrimethoxysilane, a hydrophobic surface was obtained with a water contact angle of 132.6°. The synthetic ultralight aerogel had low density (15.87 mg/cm³) and high porosity (99.01 %). Moreover, the aerogel had a three-dimensional porous structure, which endowed it with high adsorption capacity (35.99 to 74.55 g/g) for organic solvent, and outstanding cyclic stability (>88 % of the adsorption capacity after 20 cycles). At the same time, aerogel removes oil from various oil/water mixtures by gravity alone and has excellent separation performance. This work holding excellent properties in terms of convenient, low-cost, scalability to manufacture environmentally friendly biomass-based materials for oily water pollution treatment.

Interspersing CdS nanodots into iodine vacancy-rich BiOI sphere for photocatalytic lignin valorization

Flower-like BiOI was decorated by CdS nanodots and followed by the introduction of iodine vacancies (V_I) for photocatalytic sodium lignosulfonate (SLS) valorization under visible light. The iodine vacancies could adjust the band configuration, strengthen the light absorption and act as electron traps, while the intimate contact between BiOI and CdS nanodots provides a high-speed channel for charge transfer. As a consequence, the photocatalytic performance of SLS conversion into value-added vanillin was greatly improved over CdS/BiOI-V_I compared with those of CdS, BiOI and CdS/BiOI. The highest yield of vanillin is 10.95 mg/g_SLS over CdS/BiOI-V_I, about 5, 8.7, 1.3 times those of CdS, BiOI, CdS/BiOI, respectively, and exceeding most related photocatalysts reported elsewhere. More significantly, as to the lignin from Masson pine and alkali lignin, the corresponding vanillin yield can reach 7.04 and 6.54 mg/g_lignin, respectively, under the same condition, which suggests the great potential and universality for photocatalytic lignin valorization over such CdS/BiOI-V_I heterostructure.

Constructing Z-scheme 1D/2D heterojunction of ZnIn2S4 nanosheets decorated WO3 nanorods to enhance Cr(VI) photocatalytic reduction and rhodamine B degradation

Photocatalysis has been vastly employed as a feasible and efficient strategy for the removal of environmental pollutants. In this study, a well-designed core-shell heterojunction of WO3 decorated with ZnIn2S4 nanosheets were fabricated under mild in-situ conditions, and fabricated processes were systematically investigated with different fabrication durations. The coupling of WO3 and ZnIn2S4 (ZIS) resulted in a Z-scheme mechanism for charge carrier transfer, holding the respective redox capacity. The as-prepared 1D/2D WO3@ZIS heterostructure displayed the highest removal efficiency within 30 min for 25 mg L-1 Cr(VI), 89.3 and 29.7 times higher than pure WO3 and ZnIn2S4. 1D/2D WO3@ZIS remained excellently stable after 5 cycling experiments. Moreover, 40 mg L-1 RhB could be degraded within 50 min. The broad and short photogenerated electron transportation path is guaranteed by the 1D/2D and Z-scheme charge separation mechanism. It efficiently prevented photo-generated charge carriers from recombination, resulting in a longer carrier lifespan and better photocurrent responses than that of pure ones. This photocatalytic system showed promising results and also provides a framework for an efficient system for photocatalysis with potential for environmental application.

Preparation of VCo-MOF@MXene composite catalyst and study on its removal of ciprofloxacin by catalytically activating peroxymonosulfate: Construction of ternary system and superoxide radical pathway

The synergistic effect between transition metal active centers and the generation of multiple removal pathways has a significant impact on the catalytic activation efficiency of peroxymonosulfate. In this work, a kind of composite catalyst was prepared by growing VCo-metal-organic frameworks (VCo-MOF) in-situ on the surface of Ti3C2Tx by a solvothermal method. The morphology and structure are characterized by Transmission Electron Microscope (TEM), Energy Dispersion Spectrum (EDS), Atomic Force Microscope (AFM), etc. Response surface methodology was used to optimize the experimental conditions. Only 5 mg catalyst can be used to effectively activate PMS and remove 96.14 % ciprofloxacin (CIP, 20 mg/L) within 30 min. The removal effect of catalyst on CIP in different actual water environment was explored. In addition, the fluorescence spectrum test also verified the effective removal of ciprofloxacin. V-Co-Ti ternary system provides a wealth of active sites for CIP removal. Cyclic voltammetry (CV) and lear sweep voltammetry (LSV) tests showed the existence of the electron transfer pathway. The results of density functional theory (DFT) calculation show that VCo-MOF@Ti3C2Tx has excellent adsorption and activation ability for PMS. At the same time, the hydrophilicity of the catalyst makes PMS more inclined to react with water molecules, which promotes the formation of a unique superoxide radical path.

Saiz P, Reizabal A, Wuttke S, Celaya-Azcoaga L, Valverde A, Fernández de Luis R. A State-of-the-Art of Metal-Organic Frameworks for Chromium Photoreduction vs. Photocatalytic Water Remediation

Hexavalent chromium (Cr(VI)) is a highly mobile cancerogenic and teratogenic heavy metal ion. Among the varied technologies applied today to address chromium water pollution, photocatalysis offers a rapid reduction of Cr(VI) to the less toxic Cr(III). In contrast to classic photocatalysts, Metal-Organic frameworks (MOFs) are porous semiconductors that can couple the Cr(VI) to Cr(III) photoreduction to the chromium species immobilization. In this minireview, we wish to discuss and analyze the state-of-the-art of MOFs for Cr(VI) detoxification and contextualizing it to the most recent advances and strategies of MOFs for photocatalysis purposes. The minireview has been structured in three sections: (i) a detailed discussion of the specific experimental techniques employed to characterize MOF photocatalysts, (ii) a description and identification of the key characteristics of MOFs for Cr(VI) photoreduction, and (iii) an outlook and perspective section in order to identify future trends.

Fe/Mn Bimetal-Doped ZIF-8-Coated Luminescent Nanoparticles with Up/Downconversion Dual-Mode Emission for Tumor Self-Enhanced NIR-II Imaging and Catalytic Therapy

ZIF-8, as an important photoresponsive metal-organic framework (MOF), holds great promise in the field of cancer theranostics owing to its versatile physiochemical properties. However, its photocatalytic anticancer application is still restricted because of the wide bandgap and specific response to ultraviolet light. Herein, we developed lanthanide-doped nanoparticles (LDNPs) coated with Fe/Mn bimetal-doped ZIF-8 (LDNPs@Fe/Mn-ZIF-8) for second near-infrared (NIR-II) imaging-guided synergistic photodynamic/chemodynamic therapy (PDT/CDT). The LDNPs were synthesized by encapsulating an optimal Yb³⁺/Ce³⁺-doped active shell on the NaErF₄:Tm core to achieve dual-mode red upconversion (UC) and NIR-II downconversion (DC) emission upon NIR laser irradiation. At the optimal doping concentration, the UC and DC NIR-II emission intensities of LDNPs were increased 30.2- and 13.2-fold above those of core nanoparticles, which endowed LDNPs@Fe/Mn-ZIF-8 with an outstanding capability to carry out UC-mediated PDT and NIR-II optical imaging. In addition, the dual doping of Fe²⁺/Mn²⁺ markedly decreased the bandgap of the ZIF-8 photosensitizer from 5.1 to 1.7 eV, expanding the excitation threshold of ZIF-8 to the visible light region (∼650 nm), which enabled Fe/Mn-ZIF-8 to be efficiently excited by UC photons to achieve photocatalytic-driven PDT. Furthermore, Fe²⁺/Mn²⁺ ions could be responsively released in the tumor microenvironment through degradation of Fe/Mn-ZIF-8, thereby producing hydroxyl radicals (·OH) by Fenton/Fenton-like reactions to realize CDT. Meanwhile, the degradation of Fe/Mn-ZIF-8 endowed the nanosystems with tumor self-enhanced NIR-II imaging function, providing precise guidance for CDT/PDT.

Layered Molybdenum (Meta)phosphate for Photoreduction of Hexavalent Chromium and Degradation of Methylene Blue under Sunlight Radiance

Noble metal, semiconductor, or metal-free nanomaterials have shown promising applicability as potential photocatalyst materials. A one-step process has been established for the synthesis of layered molybdenum (meta)phosphate [MoO₂(PO₃)₂] using a solvothermal method. The nanopowders were characterized by X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), photoluminescence spectroscopy (PL), surface area analysis (Brunauer-Emmett-Teller (BET)), electron spin resonance (ESR), and high-resolution transmission electron microscopy (HRTEM). Through this study, we demonstrate the use of MoO₂(PO₃)₂ as a photocatalyst for wastewater treatment. The photoreduction of toxic Cr⁶⁺ to Cr³⁺ by layered molybdenum (meta)phosphate is investigated using formic acid as a scavenger. This catalyst has also been used for photodegrading organic dyes like methylene blue. MoO₂(PO₃)₂ has been shown to complete photoreduction of toxic Cr⁶⁺ to Cr³⁺ in 6 min and achieved 78% degradation efficiency for methylene blue in 36 min. The reactive species trapping experiments revealed that the key active species like O₂ ^•-, ^•OH, and h⁺ can exist and play an important role in methylene blue photodegradation.

The enhanced photocatalytic sterilization of MOF-Based nanohybrid for rapid and portable therapy of bacteria-infected open wounds

Open wounds are prone to infection and difficult to heal, which even threatens the life of patients because bacterial infections can induce other lethal complications without prompt treatment. The commonly used antibiotics treatment for bacterial infections has been reported to cause globally bacterial resistance and even the occurrence of superbacteria. The highly effective and antibiotic-independent therapeutic strategies are urgently needed for treating various kinds of bacteria-infected diseases. In this work, we synthesized an eco-friendly nanohybrid material (ZnDMZ) consisting of a kind of biodegradable metal organic framework (MOF, ZIF-8) combined with Zn-doped MoS₂ (Zn–MoS₂) nanosheets, which exhibited great ability to kill bacteria and promote the healing of bacteria-infected wounds under 660 nm light irradiation. The underlying mechanism is that besides the local hyperthermia, the nanohybrid material exhibits enhanced photocatalytic performance than single component in it, i.e., it can also be excited by 660 nm light to produce more oxygen radical species (ROS) due to the following factors. On one hand, the Zn doping can reduce the work function and the band gap of MoS₂, which promotes the movement of photoexcited electrons to the surface of the material. On the other hand, the combination between Zn–MoS₂ and MOF induces the formation of a built-in electric field due to their work function difference, thus accelerating the separation of photoexcited electron-hole pairs. Because of the synergy of photocatalytic effect, photothermal effect and the released Zn ions, the synthesized ZnDMZ possessed a highly effective antibacterial efficacy of 99.9% against Staphylococcus aureus under 660 nm light irradiation for 20 min without cytotoxicity. In vivo tests showed that this nanohybrid material promoted the wound healing due to the released Zn ions. This nanohybrid will be promising for rapid and portable treatment of bacteria-infected open wounds in pathogenic bacteria contaminated environments.

•

MOF-based hybrid can promote the healing of bacteria-infected wounds with excellent biosafety.

•

Zn doping induced the reduction of work function and band gap of MoS₂.

•

Formation of a built-in electric field at the interface can accelerate the separation of carries at the interface.

•

MOF-based hybrids can effectively adsorb oxygen and produce more ROS.

Recent Progress in the Development of MOF-Based Photocatalysts for the Photoreduction of Cr(VI)

There has been a direct correlation between the rate of industrial development and the spread of pollution on Earth, particularly in the last century. The organic and inorganic pollutants generated from industrial activities have created serious risks to human life and the environment. The concept of sustainability has emerged to tackle the environmental issues in developing chemical-based industries. However, pollutants have continued to be discharged to water resources, and finding appropriate techniques for the removal and remedy of wastewater is in high demand. Chromium is one of the high-risk heavy metals in industrial wastewaters that should be removed via physical adsorption and/or transformed into less hazardous chemicals. Photocatalysis as a sustainable process has received considerable attention as it utilizes sunlight irradiation to remedy Cr^(VI) via a cost-effective process. Numerous photocatalytic systems have been developed up to now, but metal-organic frameworks (MOFs) have gained growing attention because of their unique versatilities and facile structural modulations. A variety of MOF-based photocatalysts have been widely employed for the photoreduction of Cr^(VI). Here, we review the recent progress in the design of MOF photocatalysts and summarize their performance in photoreduction reactions.

Cellulose-Derived Carbon Dot-Guided Growth of ZnIn2 S4 Nanosheets for Photocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran

Cellulose-derived carbon (CC) dot-directed growth of ZnIn₂ S₄ was achieved through hydrothermal treatment of carboxylated cellulose followed by in situ growth of ZnIn₂ S₄ nanosheets. The carbon dots inherited from carboxylated cellulose equip plenty of surface carboxyl groups, which induce the ionic interaction with Zn²⁺ and In³⁺ and the guided growth of ZnIn₂ S₄ . As a result, the nanosheets of ZnIn₂ S₄ are evenly and intimately grown on the small carbon dots, providing high-speed channels for charges transfer. In conjunction with the reinforced visible-light capture and good conductivity of carbon dots, the resultant CC/ZnIn₂ S₄ shows an outstanding photocatalytic activity. As a proof-of-concept, visible-light-driven 5-hydroxymethylfurfural oxidation into 2,5-diformylfuran was conducted. The evolution of 2,5-diformylfuran over the optimal CC/ZnIn₂ S₄ sample can reach ∼2980 μmol g^-1 , about 3.4 times that of pristine ZnIn₂ S₄ . Additionally, the apparent quantum yield could attain 3.4 % at a wavelength of 400 nm.

Design of noble metal-free CoTiO3/Zn0.5Cd0.5S heterostructure photocatalyst for selective synthesis offurfuraldehyde combined withH2production

The development of photocatalytic systems composed of earth-abundant metal-based catalysts for efficient production of clean fuel, H₂ as well as value-added chemicals is of significant importance towards sustainable generation of energy resources. Consequently, herein we report rational construction of Z-scheme CoTiO₃/xZn_0.5Cd_0.5S (x = 5 (S1), 10 (S2), 15 (S3) and 20 wt% (S4)) heterostructures featuring suitable band structure for efficient photocatalytic reduction of protons of water to H₂ combined with selective oxidation of furfuryl alcohol (biomass derivative) to a value-added product, furfuraldehyde. Electron microscopy analysis of heterostructure S2 revealed that Zn_0.5Cd_0.5S nanoparticles are decorated over the surface of CoTiO₃ microrods. The photocatalytic studies showed higher catalytic performance by S2, for selective oxidation of furfuryl alcohol to furfuraldehyde with 95% yield coupled with a H₂ generation rate of 1929 μmol g^-1h^-1 which is about 4-fold higher than that of pristine Zn_0.5Cd_0.5S. The enhanced catalytic performance of heterostructure S2 has been ascribed to synergistic interaction aided by the Z-scheme heterojunction formation between CoTiO₃ and Zn_0.5Cd_0.5S. Overall, this work demonstrates the application of noble metal-free photocatalyst for simultaneous production of H₂ and value-added chemical under mild and environment-friendly conditions.

Hollow CdS nanotubes with ZIF-8 as co-catalyst for enhanced photocatalytic activity

Designing high-efficiency heterojunction photocatalysts for water splitting is an intriguing prospect in energy conversion. Herein, we successfully fabricated a CdS/ZIF-8 heterojunction system through a facile wet-chemically method, in which ZIF-8 nanoparticles were in-situ adhered on hollow CdS nanotubes. Due to the well-matched band structure and intimate interface contact in CdS/ZIF-8 hybrid structure, the interfacial charge separation in the established system was tremendously boosted. As a consequence, the established CdS/ZIF-8 heterojunction exhibited the optimal photocatalytic hydrogen production performance (2.10 mmol·g^-1 L^-1), which was 35 times higher than pristine CdS (0.06 mmol·g^-1·L^-1). We believe this strategy will endow new insights for the development of novel photocatalysts.

Ag NPs decorated C-TiO2/Cd0.5Zn0.5S Z-scheme heterojunction for simultaneous RhB degradation and Cr(VI) reduction

In this study, heterojunction photocatalysts, XAg@C-TCZ, based on MOF-derived C-TiO₂ and Cd_0.5Zn_0.5S decorated with Ag nanoparticles (Ag NPs) were successfully synthesized through hydrothermal and calcination methods. The catalytic effectiveness of XAg@C-TCZ was evaluated by simultaneous photocatalytic degradation of rhodamine B (RhB) and reduction of Cr(VI) under simulated sunlight irradiation. The presence of the Z-scheme heterojunction was demonstrated through trapping experiments, X-ray photoelectron spectroscopy (XPS), time-resolved photoluminescence (PL) investigations, and electron spin resonance (ESR) spectroscopy. With an initial RhB and Cr(VI) concentration of 7 mg L^-1 and 5 mg L^-1, the catalyst 10Ag@C-TCZ achieved a simultaneous removal of 95.2% and 95.5% within 120 min, respectively. With the same catalyst, the degradation rate of RhB was 2.75 times higher and the reduction rate of Cr(VI) was 9.3 times higher compared to pure Cd_0.5Zn_0.5S. Total organic carbon (TOC) analysis confirmed the extent of mineralization of RhB, while the reduction of Cr(VI) was corroborated by XPS. Compared to pure RhB and Cr(VI) solutions, the reaction rates are smaller in the solution containing both contaminants, which is attributed to the competition for ·O₂^-. 10Ag@C-TCZ also exhibited a stable catalytic performance in tap water and lake water. This work provides a new perspective on the construction of heterojunctions with doped MOF derivatives for the purification of complex pollutant systems.

Amino-functionalized Ti-metal-organic framework decorated BiOI sphere for simultaneous elimination of Cr(VI) and tetracycline

A subtle flower-like MIL-125-NH₂@BiOI was fabricated by a facile solvothermal method for simultaneously eliminating Cr(VI)/tetracycline mixed pollutants under visible light. The strong interaction between amino in MIL-125-NH₂ and Bi³⁺ of BiOI promotes the formation of this unique inlaid structure and enables the favorable contact between MIL-125-NH₂ and BiOI, thus accelerating the transfer of charge carriers. Remarkably, MIL-125-NH₂@BiOI displays a superior activity compared with that of two monomers for the photocatalytic reduction of Cr(VI) and degradation of tetracycline. More significantly, the photocatalytic efficiency can be further boosted in the coexistence of Cr(VI) and tetracycline, which is 1.8 and 1.6 times that of single Cr(VI) and tetracycline, respectively. The synergistic effect between Cr(VI) reduction and tetracycline oxidative degradation can further facilitate the separation of photo-induced electrons and holes, resulting in the improved efficiencies in the Cr(VI)/tetracycline coexistent environment. This work sheds light on that MOF-based photocatalysts possess huge potential for practical environmental remediation.

Multifunctional carbon monoxide nanogenerator as immunogenic cell death drugs with enhanced antitumor immunity and antimetastatic effect

The limited effect of immune checkpoint blockade (ICB) immunotherapy is subjected to the immuno-suppressive tumor microenvironment (TME). It is still a challenge to reverse the immune-suppressive state in clinical cancer therapy. Immunogenic cell death (ICD) is a way for inducing the therapeutical tumor immune system. In this work, carbon monoxide (CO) gas therapy is used to boost antitumor immunity for tumor control, metastasis and recurrence prevention. Briefly, CO₂-g-C₃N₄-Au@ZIF-8@F127 (CCAZF) is proposed to integrate gas therapy and immunotherapy into a photocatalytic nanogenerator for overcoming the limitations of monotherapy. CCAZF exhibits a highly effective light-controllable release behavior of CO, which gradually aggravates the oxidative stress in tumor cells to induce ICD. With the induction of ICD, CO therapy enhances immune responses and enables efficient immune cells activated. When combined with ICB, CCAZF displays an enhanced immune effect, which mediates the regression of primary and distal tumors. This strategy of in-situ photocatalytic CO therapy furthest avoids the toxicity from CO leakage and provides a new method to design novel ICD inducers.

In situ growth of amino-functionalized ZIF-8 on bacterial cellulose foams for enhanced CO2 adsorption

Zeolitic imidazolate frameworks (ZIFs) hold great potential for carbon capture, while a major challenge for the practical application of ZIFs is the development of convenient three-dimensional bulk materials. Here, sustainable and biodegradable bacterial cellulose (BC) was used as the substrate for ZIF growth. Amino-functionalized ZIF-8 (ZIF-8-NH₂) was prepared within BC substrate via an in situ growth approach. ZIF crystals were wrapped uniformly over cellulose fibers and the chelating effect between metal (zinc) ions and hydroxyl groups makes the composites have high interface affinity and compatibility. The resulting foams presented a high CO₂ adsorption capacity of 1.63 mmol/g (25 °C, 1 bar). Moreover, ZIF-8-NH₂@BC foams are facile to be regenerated by heating at 80 °C. This work provides a new avenue to construct ZIF/cellulose composites for gas treatment applications.

Nickel hydroxide as a non-noble metal co-catalyst decorated on Cd0.5Zn0.5S solid solution for enhanced hydrogen evolution

The study of non-noble metal photocatalysts provides practical significance for hydrogen evolution applications. Herein, new Cd_0.5Zn_0.5S/Ni(OH)₂ catalysts were fabricated through simple hydrothermal and precipitation methods. The photocatalytic performance of the Cd_0.5Zn_0.5S/Ni(OH)₂ composites under visible light was significantly improved, which was attributed to the wider visible light absorption range and less recombination of electron–hole pairs. The composite with a Ni(OH)₂ content of 10% showed the best hydrogen evolution rate of 46.6 mmol g⁻¹ h⁻¹, which was almost 9 times higher than that of pristine Cd_0.5Zn_0.5S. The severe photo-corrosion of Cd_0.5Zn_0.5S was greatly improved, and the Cd_0.5Zn_0.5S/Ni(OH)₂ composite exhibited a very high hydrogen evolution rate after three repeated tests. The excellent photocatalytic performance was due to the non-noble metal Ni(OH)₂ co-catalyst. The excited electrons were transferred to the co-catalyst, which reduced electron–hole recombination. Moreover, the co-catalyst offered more sites for photocatalytic reactions. This study researched the mechanism of a co-catalyst composite, providing new possibilities for non-noble metal photocatalysts.

This study researched the mechanism of a co-catalyst composite, providing new possibilities for non-noble metal photocatalysts.

The photocatalytic reduction of U(VI) into U(IV) by ZIF-8/g-C3N4 composites at visible light

The development of new photocatalyst towards the highly efficient photo-reduction of U(VI) was highly desirable. In this study, ZIF-8/g-C₃N₄ photocatalyst was fabricated to photo-reduce U(VI) from aqueous solutions under different water chemistry. It is demonstrated that ZIF-8/g-C₃N₄ exhibited the fast-photocatalytic rate (completely photoreduction within 30 min), high photocatalytic activity (K_d > 10⁵ mL/g) and superior chemical stability (No significant decrease after fifth cycles). The photoreduction rate of U(VI) significantly decreased with increasing pH, H₂O₂ radicals and photo-generated electrons play an important role in U(VI) photoreduction by quenching experiments and ESR analysis. According to XPS and XANES analysis, adsorbed U(VI) was partly photo-reduced into U(IV) by ZIF-8/g-C₃N₄ photocatalyst. The highly efficient removal of U(VI) on ZIF-8/g-C₃N₄ photocatalyst was attributed to the synergistic effect of ZIF-8 and g-C₃N₄ photocatalyst. The present study may provide a new strategy to apply new photocatalyst for in-situ photoreduction of U(VI) in actual environmental remediation.

Simultaneously removal of Cr(VI) and Cd(II) from water using a flower-like primary battery nanosystem

In this study, a new flower-like primary battery nanosystem termed "Zn/CCP/ZIF-8" was prepared by depositing conductive carbon paint (CCP) and zeolitic imidazolate framework-8 (ZIF-8) on a zinc plate (Zn). Therein, CCP had good conductivity performance and adhesiveness, ZIF-8 and Zn/CCP/ZIF-8 possessed BET specific surface areas of 1909.5 and 1265.4 m²/g respectively. The results showed that the Zn/CCP/ZIF-8 nanosystem could effectively simultaneously adsorb hexavalent chromium (Cr(VI)) and bivalent cadmium (Cd(II)) from water. The system could promote the transfer of electrons from Zn to Cr(VI) and Cd(II) which were effectively reduced to trivalent chromium (Cr(III)) and cadmium (Cd), respectively. The resultant Zn/CCP/ZIF-8/Cr/Cd composite was then easily separated from water. The adsorption isotherm, kinetics, and thermodynamics of the prepared Zn/CCP/ZIF-8 for Cr(VI) and Cd(II) were investigated. An electrochemistry performance test proved that the Zn/CCP/ZIF-8 system was a primary battery. Notably, the Zn/CCP/ZIF-8 system substantially reduced the amounts of Cr(VI) and Cd(II) absorbed by zebrafish and water spinach, thus increasing food safety. The results of a rat test indicated that the Zn/CCP/ZIF-8 system possessed a high biosafety. This study provides a promising, eco-friendly, and facile method for the simultaneously treatment of Cr(VI) and Cd(II) contamination of water.