Transformation kinetics of cyclophosphamide and ifosfamide by ozone and hydroxyl radicals using continuous oxidant addition reactors

Recent progress in mineralization of emerging contaminants by advanced oxidation process: A review

Emerging contaminants are chemicals generated due to the usage of pesticide, endocrine disrupting compounds, pharmaceuticals, and personal care products and are liberated into the environment in trace quantities. The emerging contaminants eventually become a greater menace to living beings owing to their wide range and inhibitory action. To diminish these emerging contaminants from the environment, an Advanced Oxidation Process was considered as an efficient option. The Advanced Oxidation Process is an efficient method for mineralizing fractional or generous contaminants due to the generation of reactive species. The primary aim of this review paper is to provide a thorough knowledge on different Advanced Oxidation Process methods and to assess their mineralization efficacy of emerging contaminants. This study indicates the need for an integrated process for enhancing the treatment efficiency and overcoming the drawbacks of the individual Advanced Oxidation Process. Further, its application concerning technical and economic aspects is reviewed. Until now, most of the studies have been based on lab or pilot scale and do not represent the actual scenario of the emerging contaminant mineralization. Thus, the scaling up of the process was discussed, and the major challenges in large scale implementation were pointed out.

Guidance document on the impact of water treatment processes on residues of active substances or their metabolites in water abstracted for the production of drinking water

This guidance document provides a tiered framework for risk assessors and facilitates risk managers in making decisions concerning the approval of active substances (AS) that are chemicals in plant protection products (PPPs) and biocidal products, and authorisation of the products. Based on the approaches presented in this document, a conclusion can be drawn on the impact of water treatment processes on residues of the AS or its metabolites in surface water and/or groundwater abstracted for the production of drinking water, i.e. the formation of transformation products (TPs). This guidance enables the identification of actual public health concerns from exposure to harmful compounds generated during the processing of water for the production of drinking water, and it focuses on water treatment methods commonly used in the European Union (EU). The tiered framework determines whether residues from PPP use or residues from biocidal product use can be present in water at water abstraction locations. Approaches, including experimental methods, are described that can be used to assess whether harmful TPs may form during water treatment and, if so, how to assess the impact of exposure to these water treatment TPs (tTPs) and other residues including environmental TPs (eTPs) on human and domesticated animal health through the consumption of TPs via drinking water. The types of studies or information that would be required are described while avoiding vertebrate testing as much as possible. The framework integrates the use of weight-of-evidence and, when possible alternative (new approach) methods to avoid as far as possible the need for additional testing.

Study on the Use of Ozone Water as a Chemical Decontamination Agent for Antineoplastic Drugs in Clinical Settings

The exposure of healthcare workers to antineoplastic drugs in hospitals has been recognized to be harmful. To minimize the risk of exposure, the removal of these drugs from work environments, such as compounding facilities, has been recommended. In our previous paper, the degradation and inactivation efficacy of ozone water, which is being introduced into Japanese hospitals as a chemical decontamination agent, was reported for its effects on typical antineoplastic drugs (gemcitabine, irinotecan, paclitaxel). This article aims to further investigate the efficacy of ozone water for eight antineoplastic drugs to clarify its application limitations. A small amount (medicinal ingredient: typically ca. 1.5 μmol) of formulation containing 5-fluorouracil, pemetrexed, cisplatin, oxaliplatin, cyclophosphamide, ifosfamide, doxorubicin, or docetaxel was mixed with 50 mL of ozone water (~8 mg/L), and the resulting solutions were analyzed by high-performance liquid chromatography over time to observe the degradation. Consequently, the ozonation was overall effective for the degradation of the drugs, however this varied depending on the chemical structures of the drugs and additives in their formulations. In addition, after the parent drugs were completely degraded by the ozonation, the degradation mixtures were subjected to 1H nuclear magnetic resonance spectroscopy and evaluated for mutagenicity against Salmonella typhimurium strains and cytotoxicity against human cancer cells. The degradation mixtures of cisplatin and ifosfamide were mutagenic while those of the other drugs were non-mutagenic. Further, the ozonation resulted in clear decreases of cytotoxicity for 5-fluorouracil, oxaliplatin, and doxorubicin, but increases of cytotoxicity for pemetrexed, cisplatin, cyclophosphamide, and ifosfamide. These results suggest that the ozone water should be restrictedly used according to the situation of contamination in clinical settings because the ozonation enhances toxicity depending on the drug even if degradation is achieved.

Pharmaceutical Transformation Products Formed by Ozonation-Does Degradation Occur?

The efficiency of an advanced oxidation process (AOP) using direct and indirect ozonation for the removal of pharmaceutical residues from deliberately spiked deionized water was examined. Both direct and indirect ozonation demonstrated 34% to 100% removal of the parent compounds. However, based on the products' chemical structure and toxicity, we suggest that despite using accepted and affordable ozone and radical concentrations, the six parent compounds were not fully degraded, but merely transformed into 25 new intermediate products. The transformation products (TPs) differed slightly in structure but were mostly similar to their parent compounds in their persistence, stability and toxicity; a few of the TPs were found to be even more toxic than their parent compounds. Therefore, an additional treatment is required to improve and upgrade the traditional AOP toward degradation and removal of both parent compounds and their TPs for safer release into the environment.

Advanced oxidation processes: Performance, advantages, and scale-up of emerging technologies

Advanced oxidation processes (AOPs) are promising technologies for partial or complete mineralization of contaminants of emerging concern by highly reactive hydroxyl, hydroperoxyl, superoxide, and sulphate radicals. Detailed investigations and reviews have been reported for conventional AOP systems that have been installed in full-scale wastewater treatment plants. However, recent efforts have focused on the peroxymonosulphate, persulphate, catalytic ozonation, ultrasonication and hydrodynamic cavitation, gamma radiation, electrochemical oxidation, modified Fenton, and plasma-assisted AOPs. This critical review presents the detailed mechanisms of emerging AOP technologies, their performance for treatment of contaminants of emerging concern, the relative advantages and disadvantages of each technology, and the remaining challenges to scale-up and implementation. Among the evaluated technologies, the modified electrochemical oxidation, gamma radiation, and plasma-assisted systems demonstrated the greatest potential for successful and sustainable implementation in wastewater treatment due to their environmental safety, compatibility, and efficient transformation of contaminants of emerging concern by a variety of reactive species. The other emerging AOP systems were also promising, but additional scale-up trials and a deeper understanding of their reaction kinetics in complex wastewater matrices are necessary to determine the technical and economic feasibility of full-scale processes.

Treatment-driven removal efficiency, product formation, and toxicity evolution of antineoplastic agents: Current status and implications for water safety assessment

Antineoplastic compounds, designed for chemotherapeutic anticancer therapy, have become emerging contaminants of global concern over the past decade due to their ubiquitous occurrence, environmental persistence, and multiple adverse effects on aquatic ecosystems. Increasing efforts have been devoted to developing efficient strategies for remediating water containing these micropollutants. In this study, the physicochemical properties, natural attenuation, and chemical reactivity with aqueous oxidizing species of five antineoplastic drugs with the highest environmental prevalence (i.e., tamoxifen, cyclophosphamide, ifosfamide, 5-fluorouracil, and methotrexate) were summarized. The removal performance, transformation products (TPs) of varying structures, overall reaction pathways, and toxicity evolution during different treatments were evaluated and discussed. Additionally, the biodegradability and multi-endpoint toxicity of each TP were predicted using in silico QSAR software. Depending on their distinct inherent structures, the reactivity of the antineoplastics with oxidizing species varied, with hydroxyl radicals exhibiting unparalleled merits in rapid oxidation. Complete elimination of these contaminants was observed during oxidative treatments, but with inadequate mineralization. Notably, the increase in toxicity within multiple processes was determined based on both experimental bioassays and theoretical predictions. This may be attributed to the adverse effects induced by the large number of identified and unknown TPs individually and in combination. Together with the environmental persistence and low biodegradability of most TPs, these results necessitate the application of efficient post-treatments in conjunction with a more thorough water safety evaluation (e.g., using high-throughput screening) of the mixtures of treated water and wastewater.

New insights into transformation pathways of a mixture of cytostatic drugs using Polyester-TiO2 films: Identification of intermediates and toxicity assessment

The photocatalytic activity of two bio-based polymer photocatalysts [poly(ethylene terephthalate)-TiO₂ (PET-TiO₂) and poly(L-lactic acid)-graphene oxide-TiO₂ (PLLA-GO-TiO₂)] towards Tamoxifen (TAM), Cyclophosphamide (CP), Cytarabine (CYT) and 5-Fluorouracil (5-FLU) removal was explored and compared. The highest photocatalytic activity for the degradation of the cytostatic drugs was accomplished by PET-TiO₂. Among the contaminants, TAM was the most easily removed, requiring 90 min for complete elimination, while CP showed the highest resistance to photocatalysis, not being completely removed after 6 h. Liquid chromatography coupled with high-resolution mass spectrometry analysis was employed for the identification of several transformation products (TPs) and potential pathways were proposed. A total of seventy (70) TPs including thirty-four (34) novel ones detected in AOPs were identified. The ecotoxicity of the mixture of the cytostatic drugs and TPs formed during the photocatalytic treatment was evaluated using Daphnia magna assay and was associated with the occurrence of specific TPs during the treatment process. The follow-up ECOSAR (Ecological Structure Activity Relationship) analysis further elucidated that only minor chemical transformations, such as the hydroxylation or the oxidative opening of an aromatic ring system, could hamper the adverse effects of cytostatic drugs in aquatic species. Such a comparative study on the mixture toxicity of cytostatics and their TPs is presented for the first time.

Catalytic Oxidation Process for the Degradation of Synthetic Dyes: An Overview

Dyes are used in various industries as coloring agents. The discharge of dyes, specifically synthetic dyes, in wastewater represents a serious environmental problem and causes public health concerns. The implementation of regulations for wastewater discharge has forced research towards either the development of new processes or the improvement of available techniques to attain efficient degradation of dyes. Catalytic oxidation is one of the advanced oxidation processes (AOPs), based on the active radicals produced during the reaction in the presence of a catalyst. This paper reviews the problems of dyes and hydroxyl radical-based oxidation processes, including Fenton's process, non-iron metal catalysts, and the application of thin metal catalyst-coated tubular reactors in detail. In addition, the sulfate radical-based catalytic oxidation technique has also been described. This study also includes the effects of various operating parameters such as pH, temperature, the concentration of the oxidant, the initial concentration of dyes, and reaction time on the catalytic decomposition of dyes. Moreover, this paper analyzes the recent studies on catalytic oxidation processes. From the present study, it can be concluded that catalytic oxidation processes are very active and environmentally friendly methods for dye removal.