MIL-PVDF blend ultrafiltration membranes with ultrahigh MOF loading for simultaneous adsorption and catalytic oxidation of methylene blue

Effects of a dual functional filler, polyethersulfone-g-carboxymethyl chitosan@MWCNT, for enhanced antifouling and penetration performance of PES composite membranes

Ultrafiltration technology, separating water from impurities by the core membrane, is an effective strategy for treating wastewater to meet the ever-growing requirement of clean and drinking water. However, the similar nature of hydrophobic organic pollutants and the membrane surface leads to severe adsorption and aggregation, resulting unavoidable membrane degradation of penetration and rejection. The present study presents a novel block amphiphilic polymer, polyethersulfone-g-carboxymethyl chitosan@MWCNT (PES-g-CMC@MWCNT), which is synthesized by grafting hydrophobic polyethersulfone to hydrophilic carboxymethyl chitosan in order to suspend CMC in organic solution. A mixture of hydrophilic carboxymethyl chitosan and hydrophobic polymers (polyethersulfone), in which hydrophilic segments are bonded to hydrophobic segments, could provide hydrophilic groups, as well as gather and remain stable on membrane surfaces by their hydrophobic interaction for improved compatibility and durability. The resultant ultrafiltration membranes exhibit high water flux (198.10 L m-2·h-1), suitable hydrophilicity (64.77°), enhanced antifouling property (82.96%), while still maintains excellent rejection of bovine serum albumin (91.75%). There has also been an improvement in membrane cross-sectional morphology, resulting in more regular pores size (47.64 nm) and higher porosity (84.60%). These results indicate that amphiphilic polymer may be able to significantly promote antifouling and permeability of ultrafiltration membranes.

Efficient Dye Extraction from Wastewater Using Indium-MOF-Immobilized Polyvinylidene Fluoride Membranes with Selective Filtration for Enhanced Remediation

Industrial activities have led to releasing harmful substances into the environment, necessitating the elimination of these toxic compounds from wastewater. Organic dyes, commonly found in industrial effluents, pose a threat to ecosystems and human health. Conventional treatment methods often suffer from limitations such as high cost and poor efficiency. Metal-organic frameworks (MOFs) have emerged as promising materials for selective separation, including membrane filtration (MF). Mixed-matrix membranes (MMMs) combining MOFs with polymers offer improved filtration properties. In this study, MMMs were fabricated by incorporating synthesized In-MOF with a polyvinylidene fluoride (PVDF) polymer (In-MOF@PVDF MMMs) using the nonsolvent-induced phase separation process. The MMMs were evaluated for the MF of various organic dyes, achieving notable removal efficiencies. The membrane containing 20% In-MOF (M4) demonstrated exceptional performance, removing 99% of the methylene blue (MB) dye. Additionally, membrane M4 effectively filtered Azure A (AZA), Azure B (AZB), and toluidine blue O (TOLO) with a removal efficiency of 99%. However, for Rhodamine B (RHB) and methyl orange (MO), the removal efficiencies were slightly lower at 74 and 39%, respectively. Further, these membranes are utilized in selective dye filtration in the MB+/RHB+ and MB+/MO- systems, where the selectivity was found for MB. The isothermal and DFT studies revealed the membrane's behavior with dye mixtures, while water stability and regeneration studies confirmed its durability. Thus, these findings highlight the potential of In-MOF@PVDF MMMs for effective and selective dye removal in wastewater treatment applications.

MOF-Based Membranes for Remediated Application of Water Pollution

Membrane separation plays a crucial role in the current increasingly complex energy environment. Membranes prepared by metal-organic framework (MOF) materials usually possess unique advantages in common, such as uniform pore size, ultra-high porosity, enhanced selectivity and throughput, and excellent adsorption property, which have been contributed to the separation fields. In this comprehensive review, we summarize various designs and synthesized strategies of free-standing MOF and composite MOF-based membranes for water treatment. Special emphases are given not only on the effects of MOF on membrane performance, removal efficiencies, and elimination mechanisms, but also on the importance of MOF-based membranes for the applications of oily and micro-pollutant removal, adsorption, separation, and catalysis. The challenges and opportunities in the future for the industrial implementation of MOF-based membranes are also discussed.

Superior Removal of Vanadium(V) from Simulated Groundwater with a Fe-Based Metal-Organic Framework Immobilized on Cotton Fibers

A suitable adsorbent is essential in the process of removing hazardous vanadium(V) from actual groundwater. In this work, MIL-88A(Fe)/cotton (MC) was employed to eliminate V(V) from simulated vanadium-contaminated groundwater. The findings demonstrated that MC exhibited an exceptional performance in removing V(V), displaying a maximum adsorption capacity of 218.71 mg g-1. MC exhibits great promise as an adsorbent for V(V) elimination in an extensive pH range spanning 3 to 11. Even in the presence of high levels of competing ions such as Cl-, NO3-, and SO42-, MC demonstrated remarkable specificity in adsorbing V(V). The results of column experiments and co-occurring ions influence tests indicate that MC is a potential candidate for effectively treating actual vanadium-contaminated groundwater. The effluent could meet the vanadium content restriction of 50 μg L-1 required in China's drinking water sources. Regeneration of MC can be performed easily without experiencing significant capacity loss. The results obtained from this research indicate the promising potential of MC in mitigating vanadium pollution.

Smart and Multifunctional Materials Based on Electroactive Poly(vinylidene fluoride): Recent Advances and Opportunities in Sensors, Actuators, Energy, Environmental, and Biomedical Applications

From scientific and technological points of view, poly(vinylidene fluoride), PVDF, is one of the most exciting polymers due to its overall physicochemical characteristics. This polymer can crystalize into five crystalline phases and can be processed in the form of films, fibers, membranes, and specific microstructures, being the physical properties controllable over a wide range through appropriate chemical modifications. Moreover, PVDF-based materials are characterized by excellent chemical, mechanical, thermal, and radiation resistance, and for their outstanding electroactive properties, including high dielectric, piezoelectric, pyroelectric, and ferroelectric response, being the best among polymer systems and thus noteworthy for an increasing number of technologies. This review summarizes and critically discusses the latest advances in PVDF and its copolymers, composites, and blends, including their main characteristics and processability, together with their tailorability and implementation in areas including sensors, actuators, energy harvesting and storage devices, environmental membranes, microfluidic, tissue engineering, and antimicrobial applications. The main conclusions, challenges and future trends concerning materials and application areas are also presented.

Performances of Polymer-Dispersed Liquid Crystal Films for Smart Glass Applications

Polymer-dispersed liquid crystal (PDLC) film is an active smart film penetrating the market due to its unique functionalities. These functional characteristics include switchable tint capabilities, which shield building residents from the sun's harmful ultraviolet (UV) rays, improve energy-saving features, and produce higher cost-efficiency. Although PDLC films are promising in several applications, there is still ambiguity on the performance of PDLC films. Particularly, the sizing effects' (such as film thickness and area) correlation with visible light transmission (VLT), ultraviolet rejection (UVR), infrared rejection (IRR), light intensity, current consumption, and apparent power consumption is not well understood. Therefore, this study investigated the sizing effects of PDLC films, including the thickness effect on VLT, UVR, IRR, light intensity, and area influence on current and apparent power consumptions. The varying applied voltage effect on the light transmittance of the PDLC film was also effectively demonstrated. A 0.1 mm PDLC film was successfully presented as a cost-efficient film with optimal parameters. Consequently, this study paves the way for a clearer understanding of PDLC films (behavior and sizing effects) in implementing economic PDLC films for large-scale adoption in commercial and residential premises.

ZIF-67 blended PVDF membrane for improved Congo red removal and antifouling properties: A correlation establishment between morphological features and ultra-filtration parameters

Dye effluents from various sectors have constantly imperilled the environment and ecosystem. Nano-composite membrane technology incorporating metal-organic frameworks (MOFs) has shown tremendous potential for toxic pollutant remediation. This study details the impact of ZIF-67 MOF nanoparticles on the structural properties of polyvinylidene fluoride (PVDF) ultrafiltration membrane during the non-solvent induced phase separation (NIPS) process. In order to outline the properties that determine the performance parameters in a MOF-modified mixed matrix membrane, the corresponding changes in mean pore size (MPS), surface porosity, solvent viscosity, and hydrophilicity have been discussed with appropriate surface characterization analysis. The suitability of ZIF-67 as filler nanoparticles were established based on polymer compatibility, dispersibility, and water stability studies. The ZIF-67 incorporated PVDF mixed matrix membranes (MMM) showed 99.5% CR dye removal with 2.6 times DI water permeability than the neat. The flux recovery ratio (FRR) improved by 1.9 times and the membranes were found suitable for up to 5 filtration cycles. Based on the overall results, a correlation analysis between the MMM surface properties and membrane performance parameters were established to determine the key performance parameters. It was observed that in comparison to MPS, surface porosity was more correlated to J_d/J_w (r = 0.96) and FRR (r = 0.95).

Membrane-based nanoconfined heterogeneous catalysis for water purification: A critical review✰

Progress in heterogeneous advanced oxidation processes (AOPs) is hampered by several issues including mass transfer limitation, limited diffusion of short-lived reactive oxygen species (ROS), aggregation of nanocatalysts, and loss of nanocatalysts to treated water. These issues have been addressed in recent studies by executing the heterogeneous AOPs in confinement, especially in the nanopores of catalytic membranes. Under nanoconfinement (preferably at the length of less than 25 nm), the oxidant-nanocatalyst interaction, ROS-micropollutant interaction and diffusion of ROS have been observed to significantly improve, which results in enhanced ROS yield and mass transfer, improved reaction kinetics and reduced matrix effect as compared to conventional heterogenous AOP configuration. Given the significance of nanoconfinement effect, this study presents a critical review of the current status of membrane-based nanoconfined heterogeneous catalysis system for the first time. A succinct overview of the nanoconfinement concept in the context of membrane-based nanofluidic platforms is provided to elucidate the theoretical and experimental findings related to reaction kinetics, reaction mechanisms and molecule transport in membrane-based nanoconfined AOPs vs. conventional AOPs. In addition, strategies to construct membrane-based nanoconfined catalytic systems are explained along with conflicting arguments/opinions, which provides critical information on the viability of these strategies and future research directions. To show the desirability and applicability of membrane-based nanoconfined catalysis systems, performance governing factors including operating conditions and water matrix effect are particularly focused. Finally, this review presents a systematic account of the opportunities and technological constraints in the development of membrane-based nanoconfined catalytic platform to realize effective micropollutant elimination in water treatment.

In-situ photoreduction strategy for synthesis of silver nanoparticle-loaded PVDF ultrafiltration membrane with high antibacterial performance and stability

Ultrafiltration (UF) technology using polyvinylidene fluoride (PVDF) membrane has been widely applied to water and wastewater treatment due to its low cost and simple operation process. However, PVDF-based UF membrane always encountered the issue of membrane biofouling that greatly impacted the filtration performance. In this study, we prepare a silver nanoparticle (AgNP)-loaded PVDF (Ag/PVDF) UF membrane by an in-situ photoreduction method to mitigate the membrane biofouling. Different from the previously reported method, AgNPs were synthesized in-situ by a UV photoreduction process, in which Ag⁺ ions were reduced to zero-valent Ag nanoparticles by the photo-induced reducing radicals. Antibacterial experiments showed that the inhibition efficiency of Ag/PVDF membrane to Escherichia coli reached up to ~ 99% after antibacterial treatment for 24 h. In comparison with the pristine PVDF membrane, Ag/PVDF membrane possessed a lower water contact angle (83.7° vs. 38.1°), and its pure water flux increased by 23.7%, and a high bovine serum albumin (BSA) rejection efficiency was maintained. In addition, the high stability of the Ag/PVDF composite membrane was confirmed by the extremely low releasing amount of Ag. This study provides a novel strategy for the preparation of metal nanoparticle-incorporated Ag/PVDF ultrafiltration composite membrane showing favorable antibacterial performance and stability.

Hierarchically Structured Hybrid Membranes for Continuous Wastewater Treatment via the Integration of Adsorption and Membrane Ultrafiltration Mechanisms

Growing environmental concerns are stimulating researchers to develop more and more efficient materials for environmental remediation. Among them, polymer-based hierarchical structures, attained by properly combining certain starting components and processing techniques, represent an emerging trend in materials science and technology. In this work, graphene oxide (GO) and/or carbon nanotubes (CNTs) were integrated at different loading levels into poly (vinyl fluoride-co-hexafluoropropylene) (PVDF-co-HFP) and then electrospun to construct mats capable of treating water that is contaminated by methylene blue (MB). The materials, fully characterized from a morphological, physicochemical, and mechanical point of view, were proved to serve as membranes for vacuum-assisted dead-end membrane processes, relying on the synergy of two mechanisms, namely, pore sieving and adsorption. In particular, the nanocomposites containing 2 wt % of GO and CNTs gave the best performance, showing high flux (800 L × m^-2 h^-1) and excellent rejection (99%) and flux recovery ratios (93.3%), along with antifouling properties (irreversible and reversible fouling below 6% and 25%, respectively), and reusability. These outstanding outcomes were ascribed to the particular microstructure employed, which endowed polymeric membranes with high roughness, wettability, and mechanical robustness, these capabilities being imparted by the peculiar self-assembled network of GO and CNTs.

Reed Rhizome Residue-Based Activated Carbon Adsorption Ultrafiltration Membranes for Enhanced MB Removal

Novel adsorption ultrafiltration (ADUF) membrane was designed for the removal of methylene blue (MB) by introducing Chinese herbal waste-based activated carbon (AC) into the ultrafiltration membrane. We prepared AC particles from Chinese herbal medicine waste residue (reed rhizome residue) as a raw material by ZnCl₂ activation and introduced them into the ultrafiltration membrane by phase inversion to prepare a reed rhizome residue-based activated carbon adsorption ultrafiltration (RAC-ADUF) membrane. The RAC-ADUF-0.1 membrane was characterized by a series of physical structures and chemical properties, which showed that the prepared membrane has a more hydrophilic surface and high porosity. The RAC-ADUF-0.1 membrane showed an excellent pure water flux of 255.77 L·m^-2·h^-1 and a high bovine serum albumin rejection of 99.3%. The RAC-ADUF membranes also possessed excellent antifouling performance. Notably, the RAC-ADUF-0.1 membrane provides excellent removal of MB (99% retention) compared to conventional ultrafiltration membranes. The static adsorption capacity was up to 238.48 mg/g. The significant increase in dynamic adsorption capacity on the RAC-ADUF membrane is due to the three-dimensional distribution of RAC particles on the PSF membrane cross section, which provides more active sites and increases the contact time between RAC and MB. By fitting the adsorption kinetics and isothermal adsorption curves, the results showed that the pseudo-second-order kinetic model and the Langmuir isothermal model were more accurate in explaining the adsorption process. Further kinetic analysis showed that the adsorption process of MB molecules on RAC-ADUF membranes is controlled by both external mass transfer and intraparticle diffusion, with intraparticle diffusion playing a dominant role. In addition, the RAC-ADUF membrane exhibited outstanding adsorption and regeneration abilities, and the MB removal rate stayed at about 95% after 8 adsorption regeneration experiments. In conclusion, this study provides a new idea for the preparation strategy of an adsorption ultrafiltration membrane with high rejection and high permeability and the reuse of Chinese herbal medicine waste residue.

Nano/microplastics: Fragmentation, interaction with co-existing pollutants and their removal from wastewater using membrane processes

NANO: and microplastic (NP/MP) is one of the most challenging types of micropollutants, coming from either direct release or degradation of plastic items into ecosystems. NP/MP can adsorb hazardous pollutants (such as heavy metals and pharmaceutical compounds) and pathogens onto their surface that are consumed by humans, animals, and aquatic living organisms. This paper presents the interaction of NP/MP with other pollutants in the water environment and mechanisms involved to enable the ultimate fate of NP/MP as well as the effectiveness of metal-organic frame (MOF)-based membrane over conventional membrane processes for NP/MP removal. It is found that conventional membranes could remove MPs when their size is usually more than 1000 nm, but they are ineffective in removing NPs. These NPs have potentially greater health impacts due to their greater surface area. MOF-based membrane could effectively remove both NP and MP due to its large porous structure, high adsorption capacity, and low density. This paper also discusses some challenges associated with MOF-based membranes for NP/MP removal. Finally, we conclude a specific MOF-based ultrafiltration membrane (ED-MIL-101 (Cr)) that can potentially remove both negative and positive charged NP/MP from wastewater by electrostatic attraction and repulsion force with efficient water permeability.

Ganzoury M, Zhang N, de Lannoy CF. Nanocomposite Polymeric Membranes for Organic Micropollutant Removal: A Critical Review

The prevalence of organic micropollutants (OMPs) and their persistence in water supplies have raised serious concerns for drinking water safety and public health. Conventional water treatment technologies, including adsorption and biological treatment, are known to be insufficient in treating OMPs and have demonstrated poor selectivity toward a wide range of OMPs. Pressure-driven membrane filtration has the potential to remove many OMPs detected in water with high selectivity as a membrane's molecular weight cutoff (MWCO), surface charge, and hydrophilicity can be easily tailored to a targeted OMP's size, charge and octanol-water partition coefficient (Kow). Over the past 10 years, polymeric (nano)composite microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) membranes have been extensively synthesized and studied for their ability to remove OMPs. This review discusses the fate and transport of emerging OMPs in water, an assessment of conventional membrane-based technologies (NF, reverse osmosis (RO), forward osmosis (FO), membrane distillation (MD) and UF membrane-based hybrid processes) for their removal, and a comparison to the state-of-the-art nanoenabled membranes with enhanced selectivity toward specific OMPs in water. Nanoenabled membranes for OMP treatment are further discussed with respect to their permeabilities, enhanced properties, limitations, and future improvements.

Eco-friendly approach for efficient catalytic degradation of organic dyes through peroxymonosulfate activated with pistachio shell-derived biochar and activated carbon

This study introduces a simple method for the preparation of biochar (BCP) and activated carbon using pistachio (ACP) external hull as residual solid waste. Low-cost raw materials, biodegradable, recyclable and organic solid wastes are advantages of this method. Furthermore, complete degradation of methyl orange (MO) and methylene blue (MB) to H₂O and CO₂ as eco-friendly compounds in mild reaction condition occurs at a short time. Also, the effects of crucial parameters (temperature, time, catalyst dosage, initial dye and oxidant concentration, initial reaction pH level and radical scavengers), capability, adaptability, performance and reusability of ACP were also evaluated. The results displayed that dyes could be decomposed effectively by the PMS/ACP-800 system. Furthermore, the sulphate radical (SO4∙-) was a major active role in the degradation process, while hydroxyl radical (^•OH) played a minor role. Overall, ACP had yielded high degradation of MB and MO dyes; therefore, ACP-800 could be effectively and reliably applied in the treatment of industry effluents containing MB and MO dyes.

Novel Thin Film Nanocomposite Membranes Based on Chitosan Succinate Modified with Fe-BTC for Enhanced Pervaporation Dehydration of Isopropanol

The application of environmentally friendly and energy-efficient membrane processes allows improvement the ecological safety and sustainability of industrial production. However, the effective application of membrane processes requires novel high-performance thin film composite (TFC) membranes based on biopolymers to solve environmental problems. In this work for the first time novel thin film nanocomposite (TFN) membranes based on biopolymer chitosan succinate (ChS) modified with the metal organic framework iron 1,3,5-benzenetricarboxylate (Fe-BTC) were developed for enhanced pervaporation dehydration. The formation of a selective layer of TFN membranes on the porous membrane-support was carried out by two methods—dynamic technique and physical adsorption. The effect of the membrane formation method and Fe-BTC content in ChS layer on the structure and physicochemical properties of TFN membranes was investigated. The developed TFN ChS-based membranes were evaluated in the pervaporation dehydration of isopropanol (12–30 wt.% water). It was found that TFN ChS-Fe-BTC membranes prepared by two methods demonstrated improved permeation flux compared to the reference TFC ChS membrane. The best transport properties in pervaporation dehydration of isopropanol (12–30 wt.% water) were possessed by TFN membranes with 40 wt.% Fe-BTC prepared by dynamic technique (permeation flux 99–499 g m−2 h−1 and 99.99% water in permeate) and TFN membranes with 5 wt.% Fe-BTC developed by physical adsorption (permeation flux 180–701 g m−2 h−1 and 99.99% water in permeate).

Layer-by-layer coating of MIL-100(Fe) on a cotton fabric for purification of water-soluble dyes by the combined effect of adsorption and photocatalytic degradation

Efforts have been made for sustainable development of adsorbents to purify organic contaminants from wastewater. In this study, a MIL-100(Fe) based textile that acts as a reusable adsorbent and photocatalytic agent was developed by synthesizing MIL-100(Fe) onto a cotton fabric by the layer-by-layer (LBL) process using water-based solutions. As the number of LBL cycles increased, the add-on's of MIL-100(Fe) showed a drastic increase up to 8 cycles, then showed gradual increases with further treatments. The overall adsorption performance was enhanced with the increased MIL-100(Fe) add-on's, but the specific adsorption efficiency per unit mass of MIL-100(Fe) was reduced as the LBL cycles increased, implying the reduced average adsorption efficiency with a thicker coating. To examine the reusability of the adsorbent, desorption efficiency of RhB was measured. The desorption after the first-time adsorption was not efficient due to the strong binding inside the pores. For the later cycles of adsorption–desorption, desorption occurred more efficiently, probably because RhB molecules were adhered mostly at the outer surface of the MOF layer. Simultaneously, MIL-100(Fe)@cotton demonstrated the photocatalytic degradation performance against RhB in the presence of H₂O₂ by the Fenton reaction. With the combined effect of adsorption and photodegradation, the developed fabric attained 96% removal efficiency for RhB dissolved in water. This study demonstrates an environmentally responsible process of developing a MIL-100(Fe) coated fabric that is readily available for effective removal of organic foulants in water. This fabrication method can be applied as a scalable manufacturing of metal–organic framework-based photocatalytic adsorbent textiles.

A MIL-100(Fe)-based water purifying textile that functions by dual action of adsorption and photocatalytic activity is designed via a layer-by-layer process without using toxic organic solvents.

Recent Progress of Adsorptive Ultrafiltration Membranes in Water Treatment—A Mini Review

Adsorptive ultrafiltration mixed matrix membranes (MMMs) are a new strategy, developed in recent years, to remove harmful cations and small-molecule organics from wastewater and drinking water, which achieve ultrafiltration and adsorption functions in one unit and are considered to be among the promising technologies that have exhibited efficiency and competence in water reuse. This mini review concerns the research progress of adsorptive ultrafiltration MMMs for removing heavy metal ions and small-molecule organics. We firstly introduce the types and classifications of adsorptive ultrafiltration MMMs (their classifications can be established based on the type of the adsorbent used). Furthermore, we discuss the removal mechanism of adsorptive ultrafiltration MMMs, as well as summarizing the main fabrication techniques for adsorptive ultrafiltration membranes. In addition, we identified some of the issues and challenges of the practical application for adsorptive ultrafiltration.

Simultaneous preconcentration and pre-column derivatization for rapid analysis of nitrilotriacetic acid in environmental waters by high performance liquid chromatography

A simplified sample pretreatment procedure was developed for quantitative measurement of nitrilotriacetic acid (NTA) in environmental water. On the basis of coordination capacity between NTA and metal ions, aluminum-based metal organic framework (MOF, MIL-53(Al)) was adopted for the adsorption of NTA, followed by stripping with copper sulfate as the eluent. The adsorbed NTA was converted into Cu-NTA during the desorption process, which facilitated the ensuing measurement by high performance liquid chromatography (HPLC). A linear range within 0.10 - 10 mg L^-1 was achieved, along with a limit of detection (LOD, S/N=3, n=7) of 0.03 mg L^-1 and an enrichment factor of 10.4. The developed method was validated by the analysis of sea water, influent of wastewater treatment plant and industrial wastewater, with satisfactory recoveries (90.2 - 91.1%) obtained.

Iron-based metal-organic framework derived pyrolytic materials for effective Fenton-like catalysis: Performance, mechanisms and practicability

In this study, a new catalyst was fabricated by pyrolysis under nitrogen atmosphere with MIL-53(Fe) as the precursor, and was applied to catalyze Fenton-like process. Effects of calcination temperature and pH on decontamination performance, and stability of materials were investigated. Under optimal conditions (calcination temperature of 500 °C and pH of 5.0), the new Fenton-like system remained low iron leaching, and achieved high pseudo-first-order rate constant of 0.0251 min^-1 for bisphenol S (BPS) removal, which is much higher than those in MIL-53(Fe), and nano-Fe₃O₄ catalyzed Fenton-like systems. The superiority of the new catalyst for Fenton-like catalysis was attributed to high specific surface area, as well as formed Fe(II), coordinatively unsaturated iron center and the Fe-O/Fe-C compounds based on the analyses of characterizations. Furthermore, main active species for BPS degradation was identified as hydroxyl radicals, and total hydroxyl radical generation was determined by trapping experiments. The degradation pathways of BPS were also proposed by intermediates monitoring. Moreover, this catalyst showed good potential for practical application, according to the evaluation of reuse, different pollutants degradation, and BPS removal in real wastewater. We believe this study developed a new catalyst with high catalytic activity, high stability and wide application scope, and also sheds light on further development of metal-organic frameworks for Fenton-like catalysis.

Surface-Encapsulated Bismuth Molybdate-Layered Silicate Hybrids as Sorbents for Photocatalytic Filtration Membranes

Groundwater is being depleted globally at an average rate of more than one meter per year, during a period when more than a quarter of the human population has no access to potable water. Aside from overexploitation, freshwater security is also threatened by climate change and chemical pollution. The contamination of surface and groundwater by industrial substances is also undermining the vitality of ecosystems. It was previously shown that {100}-faceted Bi2MoO6-Laponite hybrids effectively bind and photodegrade molecular species, aiding in the decontamination of water. In this study, the encapsulation of Bi2MoO6-Laponite particles with the polymers butyl acrylate and styrene further enhanced adsorption of methylene blue by 31.4%, with a specific adsorption capacity of 192 μmol/g. The polymer-particle composites were deposited to form membranes and their efficacies in water filtration and photodegradation were examined. Among the different surface modifications examined, the highest dye sorption was obtained by butyl acrylate and styrene (3:2) with a 5 mol % cross-linker. This study provides a method for enhancing the molecular adsorption of composite particles used in membranes capable of multiple cycles of adsorption and photodegradation, advancing the application of such systems to water filtration.

Dye contaminated wastewater treatment through metal–organic framework (MOF) based materials

A complete discussion of MOFs and MOF composites such as MOF-based membranes, magnetic MOFs, and metal–organic gels (MOGs) used for dye removal along with their adsorption efficiency has been done.

Novel Mixed Matrix Membranes Based on Polymer of Intrinsic Microporosity PIM-1 Modified with Metal-Organic Frameworks for Removal of Heavy Metal Ions and Food Dyes by Nanofiltration

Nowadays, nanofiltration is widely used for water treatment due to its advantages, such as energy-saving, sustainability, high efficiency, and compact equipment. In the present work, novel nanofiltration membranes based on the polymer of intrinsic microporosity PIM-1 modified by metal-organic frameworks (MOFs)-MIL-140A and MIL-125-were developed to increase nanofiltration efficiency for the removal of heavy metal ions and dyes. The structural and physicochemical properties of the developed PIM-1 and PIM-1/MOFs membranes were studied by the spectroscopic technique (FTIR), microscopic methods (SEM and AFM), and contact angle measurement. Transport properties of the developed PIM-1 and PIM-1/MOFs membranes were evaluated in the nanofiltration of the model and real mixtures containing food dyes and heavy metal ions. It was found that the introduction of MOFs (MIL-140A and MIL-125) led to an increase in membrane permeability. It was demonstrated that the membranes could be used to remove and concentrate the food dyes and heavy metal ions from model and real mixtures.

Recent advances in metal-organic framework membranes for water treatment: A review

Among many separation membranes reported to date, the favorable polymer affinity and unique physio-chemical performances of metal-organic frameworks (MOFs) including ultra-high surface area, regular and highly controlled porosity have drawn widespread attention in industrial and academic communities. In this comprehensive review, the developmental timeline of MOF containing membranes for water treatment were clarified. The removal efficiencies, elimination mechanisms, as well as possible influencing factors of various MOF containing membranes that applied to water treatment were systematically summarized. The excellent removal performances of MOF containing membranes for various pollutants were determined by the size-exclusion, π-π stacking interaction, electrostatic interaction, hydrogen bonding and so on. Since the progress of engineered MOF containing membranes for practical wastewater treatment applications lags, we further analyzed the potential environmental application of MOF containing membranes from four aspects (stability of MOFs, antifouling performance of membranes, compatibility between MOF fillers and polymer matrix, dispersity of MOF nanoparticles in matrix), hoping to provide some meaningful insights.

Insights into enhanced removal of 1,2-dichloroethane by amorphous boron-enhanced Fenton system: Performances and mechanisms

In this study, amorphous boron was employed as a reductant in traditional Fenton system for the first time to accelerate the regeneration of Fe(II). The degradation of 1,2-dichloroethane (DCA) was only 40.0% in Fenton system, while in the presence of amorphous boron, it could reach to 93.0% in 60 min. HO• was demonstrated to be the major reactive oxygen species (ROSs) and responsible for DCA degradation. Further, the mechanism of amorphous boron-enhanced Fenton system was described as follows. With the addition of amorphous boron, the reduction process occurred on its surface and Fe(III) was regenerated to Fe(II) to further utilize H₂O₂ and produce more HO• for DCA removal. Meanwhile, amorphous boron was oxidized to B₂O₃ and a portion of H₃BO₃ leaching into the solution occurred. Both B₂O₃ and H₃BO₃ had no reactivity for Fe(III) reduction. Moreover, DCA could be entirely dechlorinated and mineralized to CO₂, Cl^- and H₂O. Vinyl chloride (VC) and dichloromethane (DCM) were the mainly intermediates in DCA degradation and two possible pathways were inferred. Eventually, the performance of DCA degradation in complex solution matrixes and for other contaminants removal were tested, demonstrating the broad-spectrum reactivity and superiority of amorphous boron-enhanced Fenton system in the remediation of contaminated groundwater.

Highly Efficient Removal for Methylene Blue and Cu2+ onto UiO-66 Metal-Organic Framework/Carboxylated Graphene Oxide-Incorporated Sodium Alginate Beads

Herein, we report a new metal-organic framework (MOF)-based composite beads adsorbent made via incorporating UiO-66 MOF, carboxylated graphene oxide (GOCOOH) into sodium alginate for efficient removal of methylene blue dye, and Cu2+ ions. The successful fabrication of the synthesized UiO-66/GOCOOH@SA composite beads was confirmed by means of X-ray diffraction, Fourier transform infrared, scanning electron microscopy, zeta potential, X-ray photoelectron spectroscopy analysis, and thermogravimetric analysis and BET measurement. The incorporation of both UiO-66 and GOCOOH into SA beads greatly increased their adsorption efficiency for the removal of both MB and Cu2+ with maximum adsorption capacities of 490.72 and 343.49 mg/g, respectively. The removal process of both MB and Cu2+ follows the pseudo-second-order model and Freundlich isotherm model. A plausible adsorption mechanism was discussed in detail. Regeneration tests clarified that the removal efficiencies toward both MB and Cu2+ remained higher than 87% after five cycles. These results reveal the potentiality of UiO-66/GOCOOH@SA beads as an excellent adsorbent.

Recyclable polyurethane foam loaded with carboxymethyl chitosan for adsorption of methylene blue

Novel composite foam (CMCTS-PUF-s) was prepared by immobilizing carboxymethyl chitosan (CMCTS) on polyurethane foam (PUF) in which amino groups in CMCTS reacted with isocyanate groups in polyurethane prepolymer. The adsorption capacity of the optimal composite foam (CMCTS-PUF-5) reached to 118.2 mg/g with 5% CMCTS loading. The removal rate to methylene blue (MB) was up to 97.1%, which was obviously higher than 18.9% of PUF. After recycling for five times, the removal rate still reached 83.2%, which strongly proved the excellent reusability of immobilizing CMCTS modified PUF. The characterization results of FTIR and TG showed that CMCTS was well loaded on PUF by covalent bond. The Young's modulus and tensile strength of CMCTS-PUF-5 were increased by 252% and 97% compared with that of PUF. MIP characterization result showed the porosity of CMCTS-PUF-5 was 73.99% and the pore sizes were mainly distributed between 50 and 150 µm, which provide sufficient diffusion channels and active sites for MB dyes. The adsorption kinetics and isotherm proved pseudo-second-order kinetic model and Langmuir isotherm model could well describe the adsorption process of CMCTS-PUF-5. Therefore, CMCTS-PUF-s presents excellent recoverability, high stability and attractive adsorption efficiency, shows the potential application in future treatment of dye wastewater.

Facile fabrication of bifunctional ZIF-L/cellulose composite membrane for efficient removal of tellurium and antibacterial effects

Fabrication of simple and efficient adsorbents is greatly vital to satisfy the requirements of removal of tellurium in wastewater treatment, yet remains challenging. Here, a facile and cost-effective strategy to develop ZIF-L coated self-crosslinking cellulose membrane (ZIF-L/SC membrane) for tellurium adsorption was presented. In-situ vertical growth of ZIF-L nanoplates with functional properties on membrane substrate is an available strategy, effectively remedying deficiency of pure nanosized sorbent in agglomeration problem and unhandy recovery. The SC membrane formed by strong hydrogen bonding among cellulose fibers is an excellent substrate, due to the favorable mechanical strength and abundant hydroxyl groups. The as-prepared ZIF-L/SC membrane shows advantageous morphology of large contact surface, fine thermal stability and eligible mechanical strength. The adsorption performance and possible mechanism of ZIF-L/SC membrane for Te (IV) were investigated by diverse characterization methods, showing admirable adsorption effect. Furthermore, the ZIF-L/SC membrane has excellent antibacterial properties, thus it is expected to deal with membrane fouling caused by microorganism breeding. Therefore, the bifunctional ZIF-L/SC membrane with excellent antibacterial activity is anticipated to be a promising candidate for efficient tellurium adsorbents, and simultaneously have potential in various fields in the future.

Cerium based UiO-66 MOF as a multipollutant adsorbent for universal water purification

Herein, we demonstrate the use of cerium (Ce)-UiO-66 metal organic framework (MOF) for the removal of a variety of potentially toxic pollutants. The Ce-UiO-66 MOF, with similar framework topologies to Zr-UiO-66, has not been explored for its adsorptive properties in water remediation. The replacement of Zr metal center with Ce yields a MOF that can be synthesized in shorter durations with lesser energy consumptions and with excellent multipollutant adsorption properties. Further, the Ce-UiO-66 MOF was also studied for its adsorption abilities in the binary component system. Interestingly, the adsorbent showed higher adsorption capacities in the presence of other pollutants. Removal studies for other potentially toxic anionic and cationic dyes showed that the Ce-UiO-66 MOF has a wide range of contaminant removal abilities. Investigations of individual adsorption capacities revealed that the Ce-UiO-66 MOF has a maximum adsorption capacity of 793.7 mg/g for congo red (CR), 110 mg/g for methylene blue (MB), 66.1 mg/g for fluoride (F^-), 30 mg/g for Cr⁶⁺ and 485.4 mg/g for the pharmaceutical waste diclofenac sodium (DCF). To imply the practical applications of the Ce-UiO-66 MOF we have also demonstrated an adaptable filter that could separate all the potentially toxic pollutants.

Prediction of the phenol removal capacity from water by adsorption on activated carbon

High-performance sulfonated polysulfone (SPSf) mixed-matrix membranes (MMMs) were fabricated via a nonsolvent-induced phase separation (NIPS) method using zeolitic imidazolate frameworks-67 (ZIF-67) as a crosslinker. Acid-base crosslinking occurred between the sulfonic acid groups of SPSf and the tertiary amine groups of the embedded ZIF-67, which improved the dispersion of ZIF-67 and simultaneously improved the membrane strzcture and permselectivity. The dispersion of ZIF-67 in the MMMs and the acid-base crosslinking reaction were verified by energy-dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The pore structure analysis of MMMs indicated that filling ZIF-67 into SPSf enhanced the average surface pore sizes, surface porosities and more micropore in cross-sections. The crossflow filtrations showed the MMMs have higher pure water fluxes (57 to 111 L m^-2 h^-1) than the SPSf membrane (55 L m^-2 h^-1) but also higher bovine serum albumin (BSA) rejection rate of 93.9-95.8%, a model protein foulant. The MMMs showed a higher water contact angle than the SPSf membrane due to the addition of hydrophobic ZIF-67 and acid-base crosslinking, and also maintained high thermal stability evidenced by the thermogravimetric analysis (TGA) results. At the optimal ZIF-67 concentration of 0.3 wt%, the water flux of the SPSf-Z67-0.3 membrane was 82 L m^-2 h^-1 with a high BSA rejection rate of 95.3% at 0.1 MPa and better antifouling performance (FRR = 70%).

Selective adsorption of malachite green (MG) and fuchsin acid (FA) by ZIF-67 hybridized polyvinylidene fluoride (PVDF) membranes

MOF/polymer hybrid membranes integrate the surface activity of MOFs and the advantages of PVDF membranes, and can be used as adsorption membranes in the efficient removal of target organics. In this work, a new hybrid membrane of ZIF-67/PVDF with varying ZIF-67 dosages has been fabricated through a facile mechanical blending followed by a lyotropic phase transition. Methods including field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), FT-IR analyses and surface hydrophobicity/hydrophilicity measurements are applied to characterize the structure, physicochemical properties and membrane performances. Two synthetic triarylmethane dyes, cationic malachite green (MG) and anionic fuchsin acid (FA), are chosen as the main adsorption targets to evaluate the adsorption capacities of the resulting ZIF-67/PVDF hybrid membranes. Interestingly, all of the ZIF-67/PVDF hybrid membranes exhibit distinctly favorable efficiencies and selectivities toward MG and FA compared to pristine PVDF, which proves the positive roles of ZIF-67 in the adsorption ability of the hybrid membranes. The adsorption conditions are optimized and the adsorption kinetics and thermodynamics are analysed to study the adsorption mechanism. The reusability and the structural stability of the hybrid membranes undergoing cyclic adsorption processes are also discussed. To the best of our knowledge, this is the first time that good adsorption capacities for MG and FA for these MOF/PVDF membranes have been reported. This work highlights the prospective applications of MOF/PVDF hybrid membranes in the rapid and effective removal of target organics in the treatment of waste water.

Novel Pervaporation Membranes Based on Biopolymer Sodium Alginate Modified by FeBTC for Isopropanol Dehydration

Modern society strives for the development of sustainable processes that are aimed at meeting human needs while preserving the environment. Membrane technologies satisfy all the principles of sustainability due to their advantages, such as cost-effectiveness, environmental friendliness, absence of additional reagents and ease of use compared to traditional separation methods. In the present work, novel green membranes based on sodium alginate (SA) modified by a FeBTC metal–organic framework were developed for isopropanol dehydration using a membrane process, pervaporation. Two kinds of SA-FeBTC membranes were developed: (1) untreated membranes and (2) cross-linked membranes with citric acid or phosphoric acid. The structural and physicochemical properties of the developed SA-FeBTC membranes were studied by spectroscopic techniques (FTIR and NMR), microscopic methods (SEM and AFM), thermogravimetric analysis and swelling experiments. The transport properties of developed SA-FeBTC membranes were studied in the pervaporation of water–isopropanol mixtures. Based on membrane transport properties, 15 wt % FeBTC was demonstrated to be the optimal content of the modifier in the SA matrix for the membrane performance. A membrane based on SA modified by 15 wt % FeBTC and cross-linked with citric acid possessed optimal transport properties for the pervaporation of the water–isopropanol mixture (12–100 wt % water): 174–1584 g/(m2 h) permeation flux and 99.99 wt % water content in the permeate.