Graphitic carbon nitride (g-C3N4) nanosheets functionalized composite membrane with self-cleaning and antibacterial performance

Construction of self-cleaning g-C3N4/Bi2MoO6/PVDF membrane and coupling with photo-Fenton-like reaction for sustainable removal of antibiotics in wastewater

Constructing a photocatalytic membrane and photo-Fenton reaction coupling system is a novel strategy to enhance the photocatalytic activity of the membrane and eliminate the problem of membrane contamination. Herein, a g-C3N4/Bi2MoO6/PVDF photocatalytic membrane was prepared using a tannic acid-assisted in-situ deposition method. The membrane was characterized by three advantages of photocatalytic, self-cleaning, and antibacterial properties. Under the photo-Fenton-like conditions, the membrane had superior photodegradation efficiency of 90.7% for tetracycline, one of the main antibiotic contaminants in the China's aquatic system. Moreover, the membrane had excellent photo-Fenton self-cleaning ability, its flux recovery rate was up to 96%-98% after the self-cleaning process. Photoluminescence spectra, diffuse UV-visible spectrum, transient photocurrent responses, and electrochemical AC impedance spectrum results show that the heterojunction structure formed by g-C3N4 and Bi2MoO6 could improve the separation efficiency of photogenerated electrons-hole pairs. Electron spin resonance spectroscopy confirmed the photo-electrons facilitated the formation of hydroxyl radical (·OH) in the existence of H2O2, which enhanced tetracycline degradation. Moreover, the superior photo-Fenton self-cleaning performance, which mainly relied on the active free radicals produced by the photo-Fenton-like membrane to remove dirt on the membrane surface or in the membrane pore channel. Our results may shed new light on the development of promising photocatalytic membrane systems by coupling with photo-Fenton-like processes, and facilitate their applications for wastewater treatment.

Zinc hexacyanoferrate/g-C3N4 nanocomposites with enhanced photothermal and photodynamic properties for rapid sterilization and wound healing

Photoactivated therapy has gradually emerged as a promising and rapid method for combating bacteria, aimed at overcoming the emergence of drug-resistant strains resulting from the inappropriate use of antibiotics and the subsequent health risks. In this work, we report the facile fabrication of Zn3[Fe(CN)6]/g-C3N4 nanocomposites (denoted as ZHF/g-C3N4) through the in-situ loading of zinc hexacyanoferrate nanospheres onto two-dimensional g-C3N4 sheets using a simple metal-organic frameworks construction method. The ZHF/g-C3N4 nanocomposite exhibits enhanced antibacterial activity through the synergistic combination of the excellent photothermal properties of ZHF and the photodynamic capabilities of g-C3N4. Under dual-light irradiation (420 nm + 808 nm NIR), the nanocomposites achieve remarkable bactericidal efficacy, eliminating 99.98% of Escherichia coli and 99.87% of Staphylococcus aureus within 10 minutes. Furthermore, in vivo animal experiments have demonstrated the outstanding capacity of the composite in promoting infected wound healing, achieving a remarkable wound closure rate of 99.22% after a 10-day treatment period. This study emphasizes the potential of the ZHF/g-C3N4 nanocomposite in effective antimicrobial applications, expanding the scope of synergistic photothermal/photodynamic therapy strategies.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Type I photodynamic antimicrobial therapy: Principles, progress, and future perspectives

The emergence of drug-resistant bacteria has significantly diminished the efficacy of existing antibiotics in the treatment of bacterial infections. Consequently, the need for finding a strategy capable of effectively combating bacterial infections has become increasingly urgent. Photodynamic therapy (PDT) is considered one of the most promising emerging antibacterial strategies due to its non-invasiveness, low adverse effect, and the fact that it does not lead to the development of drug resistance. However, bacteria at the infection sites often exist in the form of biofilm instead of the planktonic form, resulting in a hypoxic microenvironment. This phenomenon compromises the treatment outcome of oxygen-dependent type-II PDT. Compared to type-II PDT, type-I PDT is not constrained by the oxygen concentration in the infected tissues. Therefore, in the treatment of bacterial infections, type-I PDT exhibits significant advantages over type-II PDT. In this review, we first introduce the fundamental principles of type-I PDT in details, including its physicochemical properties and how it generates reactive oxygen species (ROS). Next, we explore several specific antimicrobial mechanisms utilized by type-I PDT and summarize the recent applications of type-I PDT in antimicrobial treatment. Finally, the limitations and future development directions of type-I photosensitizers are discussed. STATEMENT OF SIGNIFICANCE: The misuse and overuse of antibiotics have accelerated the development of bacterial resistance. To achieve the effective eradication of resistant bacteria, pathfinders have devised various treatment strategies. Among these strategies, type I photodynamic therapy has garnered considerable attention owing to its non-oxygen dependence. The utilization of non-oxygen-dependent photodynamic therapy not only enables the effective elimination of drug-resistant bacteria but also facilitates the successful eradication of hypoxic biofilms, which exhibits promising prospects for treating biofilm-associated infections. Based on the current research status, we anticipate that the novel type I photodynamic therapy agent can surmount the biofilm barrier, enabling efficient treatment of hypoxic biofilm infections.

A 2D carbon nitride-based electrochemical aptasensor with reverse amplification for highly sensitive detection of okadaic acid in shellfish

Okadaic acid (OA) is one of the main virulence factors of diarrheal shellfish toxins (DSP). It is of great significance to detect OA with an accurate, specific and cost-effective technique in the fields of seafood safety and water quality control. In this work, an electrochemical aptasensor with reverse amplification was developed for the sensitive detection of OA. A two-dimensional graphite-phase nanomaterial (carbon nitride) modified with an anti-OA aptamer and thionine (Th) was immobilized onto the surface of the electrochemical electrode as the sensitive element to capture target OA molecules. ssDNA-modified carbon nitride was used as the reverse amplification element by hybridizing with non-OA linked aptamers. The preparation of the electrochemical aptasensor was well characterized by Scanning Electron Microscopy (SEM), zeta potential detection, UV-Vis absorption, Brunner-Emmet-Teller (BET) measurements, and electrochemical measurements. The quantitative assessment of OA was achieved by differential pulse voltammetry (DPV). Experimental results indicated that this aptasensor showed a concentration-dependent response to OA with a good detection performance including in terms of selectivity, repeatability, reproducibility, and stability. It exhibited 100-fold selectivity between OA and other toxins including dinophysistoxins (DTX), pectenotoxins (PTX), and yessotoxins (YTX). In addition, it showed a much wider quantification range, which is 10-13 M-10-10 M (0.080-80.50 pg mL-1). The detection limit was as low as 10-13 M (0.080 pg mL-1). The aptasensor also successfully achieved significant practicality on real shellfish samples contaminated by OA. All these results demonstrated that the reverse amplification strategy for marine toxin detection may provide a label-free and rapid detection approach for portable applications in the fields of environmental monitoring and food security.

Engineering Atomic Ag1-N6 Sites with Enhanced Performance of Eradication Drug-Resistant Bacteria over Visible-Light-Driven Antibacterial Membrane

Utilizing visible light for water disinfection is a more convenient, safe, and practical alternative to ultraviolet-light sterilization. Herein, we developed silver (Ag) single-atom anchored g-C3N4 (P-CN) nanosheets (Ag1/CN) and then utilized a spin-coating method to fabricate the Ag1/CN-based-membrane for effective antibacterial performance in natural water and domestic wastewater. The incorporated Ag single atom formed a Ag1-N6 motif, which increased the charge density around the N atoms, resulting in a built-in electric field ∼17.2 times stronger than that of pure P-CN and optimizing the dynamics of reactive oxygen species (ROS) production. Additionally, the Ag1-N6 motif inhibited the release of Ag ions, ensuring good biocompatibility. Based on the first-principles calculation, the adsorption energy of O2 on the Ag1/CN (-0.32 eV) was lower than that of P-CN (-0.07 eV), indicating that loaded Ag single atom can lower the energy barrier for O2 activation, generating extra *OH radicals that cooperated with *O2- to effectively neutralize bacteria. As a result, the Ag1/CN powder-catalyst with the concentration of 30 ppm demonstrated a 99.9% antibacterial efficiency against drug-resistant bacteria (Escherichia coli, Staphylococcus aureus, kanamycin-resistant Escherichia coli, and methicillin-resistant Staphylococcus aureus) under visible-light irradiation for 4 h. This efficacy was 24.8 times higher than that of the P-CN powder catalyst. Moreover, the Ag1/CN-based-membrane can maintain a 99.9% bactericidal efficiency for natural water and domestic wastewater treatment using a homemade flow device, demonstrating its potential for water disinfection. Notably, the visible-light-driven antibacterial efficiency of the Ag1/CN catalyst outperformed the majority of the reported g-C3N4-based catalysts/membranes.

Modification of PAN electrospun nanofiber membranes with g-C3N4 nanotubes/carbon dots to enhance MBR performance

This study is dedicated to the enhancement of electrospun polyacrylonitrile (PAN) nanofiber membranes for their application in membrane bioreactor (MBR) processes. The improvement is achieved through the incorporation of graphitic carbon nitride nanotubes/carbon dots (g-C3N4 NT/CDs) and subsequent heat post-treatments at varying temperatures. Notably, the hot-pressing methodology effectively mitigates surface roughness and significantly reduces issues related to peeling during nanofiber experimentation. Our results demonstrate that the introduction of 0.5 wt% of g-C3N4 NT/CDs leads to a substantial enhancement in water flux. In particular, nanocomposite membranes subjected to hot-pressing at 90 °C for 10 min exhibited an impressive flux recovery ratio (FRR) of 70%. Furthermore, the heat-treated nanocomposite membranes exhibited remarkable antifouling properties and significantly reduced fouling rates when compared to their heat-treated bare counterparts. This study underscores the noteworthy potential of g-C3N4 NT/CDs-modified PAN nanofiber membranes to substantially elevate MBR performance, firmly positioning them as highly promising candidates for critical applications in the domains of water and wastewater treatment. However, it is imperative to underscore that the existing written material necessitates a comprehensive overhaul to align with the provided structural framework.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Fabrication of a Nanosized g-C3N4-Loaded Cellulose Microfiber Bundle to Induce Highly Efficient Water Treatment via Photodegradation

Graphite carbon nitride (g-C3N4) with a suitable structure and strong amine activity is designed and prepared to serve as a hydrogen bond donor for the microfibrilization of corncob cellulose to form a cellulose microfiber (CMF) bundle. Simultaneously, well-dispersed nanosized g-C3N4 is loaded into the bundle to form a photocatalyst for efficient photodegradation of rhodamine B (Rh B) in water. Under the optimal preparation conditions at 165 °C, 10 min, and 0.08 mol/L H2SO4, the yield of g-C3N4-functionalized cellulose microfibers (CMF-g-C3N4) reaches to the highest over 70%. The catalytic rate of CMF-g-C3N4 is 3.3 times larger than that of pure g-C3N4. The degradation rate of Rh B is maintained at over 90% in 10 cycles of photocatalytic degradation. The obtained CMF-g-C3N4 also has good thermal stability and mechanical properties. This research suggests a particularly simple way to transform cellulose into a highly efficient photocatalyst for water treatment.

Photocatalytic hydrogel film assisted forward osmosis (PFO) for water treatment: Sustainable performance and contaminant control

The integration of catalytic oxidation with forward osmosis (FO) holds promising potential to address two crucial challenges encountered by FO: fouling and unsustainable performance, but suitable approaches are still rare. Herein, we have successfully developed a photocatalysis-assisted forward osmosis (PFO) system. In the PFO, a self-made porous carbon nitride doped functional carbon nanotube photocatalytic hydrogel film (PCN@CNTM) was engaged in the FO process in an inventive way by simply sticking to the commercial FO membrane surface, preventing damage to the membrane from the catalyst's direct insertion and delaying the assault from the oxidation groups. PFO allowed organic pollutants to decompose in the feed solution (90%) and on the membrane surface, regulating the water chemical potential and giving the FO membrane antifouling properties. This resulted in sustainable water flux (11.8 LMH) with no significant membrane fouling in PFO, whereas in FO alone there was a significant fouling and flux drop (from 12.73 to 7.23 LMH in 4 h). Moreover, the expensive FO membrane was protected while the hydrogel film can be replaced on demand. The PFO exemplifies the concept of synergistic technology integration, presenting a new perspective on harnessing the strengths of distinct technologies in a mutually beneficial manner.

A CuS@g-C3N4 heterojunction endows scaffold with synergetic antibacterial effect

Graphitic carbon nitride (g-C3N4) had aroused tremendous attention in photodynamic antibacterial therapy due to its excellent energy band structure and appealing optical performance. Nevertheless, the superfast electron-hole recombination and dense biofilm formation abated its photodynamic antibacterial effect. To this end, a nanoheterojunction was synthesized via in-situ growing copper sulfide (CuS) on g-C3N4 (CuS@g-C3N4). On the one hand, CuS could form Fermi level difference with g-C3N4 to accelerate carrier transfer and thus facilitate electron-hole separation. On the other hand, CuS could respond near-infrared light to generate localized thermal to disrupt biofilm. Then the CuS@g-C3N4 nanoparticle was introduced into the poly-l-lactide (PLLA) scaffold. The photoelectrochemistry results demonstrated that the electron-hole separation efficiency was apparently enhanced and thereby brought an approximate sevenfold increase in reactive oxygen species (ROS) production. The thermal imaging indicated that the scaffold possesses a superior photothermal effect, which effectively eradicated the biofilm by disrupting its extracellular DNA and thereby facilitated to the entry of ROS. The entered ROS could effectively kill the bacteria by causing protein, K+, and nucleic acid leakage and glutathione consumption. As a consequence, the scaffold displayed an antibacterial rate of 97.2% and 98.5% against E. coli and S. aureus, respectively.

Antimicrobial Nanoparticles Mediated Prevention and Control of Membrane Biofouling in Water and Wastewater Treatment: Current Trends and Future Perspectives

Global water scarcity and water pollution necessitate wastewater reclamation for further use. As an alternative to conventional techniques, membrane technology is extensively used as an advanced method for water purification and wastewater treatment due to its selectivity, permeability, and efficient removal of pollutants. However, microbial biofouling is a major threat that deteriorates membrane performance and imparts operational challenges. It is a natural phenomenon caused by the undesirable colonization of microbes on membrane surfaces. The economic penalties associated with this menace are enormous. The traditional preventive measures are dominated by biocides, toxic chemicals, cleaners and antifouling surfaces, which are costly and often cause secondary pollution. Recent focus is thus being directed to promote inputs from nanotechnology to control and mitigate this major threat. Different anti-microbial nanomaterials can be effectively used to prevent the adhesion of microbes onto the membrane surfaces and eliminate microbial biofilms, to provide an economical and eco-friendly solution to biofouling. This review addresses the formation of microbial biofilms and biofouling in membrane operations. The potential of nanocomposite membranes in alleviating this problem and the challenges in commercialization are discussed. The antifouling mechanisms are also highlighted, which are not widely elucidated.

Robust self-cleaning membrane with superhydrophilicity and underwater superoleophobicity for oil-in-water separation

The discharge of oily wastewater has increased dramatically and will bring serious environmental problems. In this work, a self-cleaning and anti-fouling g-C₃N₄/TiO₂/PVDF composite membrane was fabricated via the layer-by-layer approach. The surface of as-prepared composite membrane displayed a superhydrophilic and underwater superoleophobic behavior under irradiation with visible light. Also, upon irradiation with visible light, the fabricated g-C₃N₄/TiO₂/PVDF composite membrane displayed enhanced permeation flux and improved oil removal efficiency as a result of the generation of hydroxyl free radicals during the photocatalytic filtration process. Significantly, irradiation with visible light remarkably improved reusability of the composite membrane by initiating photocatalytic decomposition of deposited oil foulants, which enabled removal of over 99.75% of oils, thus reaching a nearly 100% flux recovery ratio. Furthermore, the g-C₃N₄/TiO₂/PVDF composite membrane exhibited great anti-fouling behavior in photocatalysis-assisted filtration. The mechanistic study revealed that underwater superhydrophobicity and the generation of free hydroxyl radicals jointly contributed to membrane anti-fouling. The greatest advantages of this g-C₃N₄/TiO₂/PVDF composite membrane are that not only does it degrades the oil pollutants, but it also makes the membrane less vulnerable to fouling.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

A solar-driven degradation-evaporation strategy for membrane self-cleaning in the efficient separation of viscous crude oil/water emulsions

Membrane separation techniques are promising methods for effectively treating hazardous emulsified oily wastewater, but membrane fouling remains a serious challenge because the high viscosity and complex composition of crude oil make it easy to adhere to membranes and difficult to be removed by conventional physical or chemical cleaning means. Herein, a two-stage solar-driven (photo-Fenton degradation/evaporation) strategy was proposed to realize the self-cleaning of membranes fouled by viscous crude oil (>60,000 mPa s), wherein the photo-Fenton process helped to degrade the heavy components into light components, and all light components removed during the solar-driven evaporation process. A 1D/2D heterostructure membrane with photo-Fenton activity and anti-crude-oil-fouling performance was prepared via a facile self-assembly vacuum-assist method. The addition of rod-like g-C₃N₄ (RCN) increased the interlayer distance of α-FeOOH/porous g-C₃N₄ (FPCN) nanosheets, resulting in a high permeation flux. The FPCN-RCN membrane exhibited both high permeation flux of 779 ± 19 L m^-2h^-1bar^-1 and a separation efficiency of 99.4% for highly viscous crude oil-in-water emulsion. Importantly, the viscous crude oil fouled on the membrane was completely removed by the photo-Fenton degradation/solar-driven evaporation strategy, and the flux recovery rate of the membrane was ∼100%. Therefore, the FPCN-RCN membrane combined with the novel self-cleaning strategy exhibits great potential for practical emulsified oily wastewater treatment.

Ultrathin g-C3N4 composite Bi2WO6 embedded in PVDF UF membrane with enhanced permeability, anti-fouling performance and durability for efficient removal of atrazine

A novel Bi₂WO₆-g-C₃N₄/polyvinylidene fluoride (PVDF) composite ultrafiltration (UF) membrane (BWO-CN/PVDF) was prepared by microwave hydrothermal and immersion precipitation phase transformation method. The BWO-CN/PVDF-0.10 exhibited an outstanding photocatalytic removal rate of atrazine (ATZ) (97.65 %) under the simulated sunlight and enhanced permeate flux (1356.09 L·m^-2·h^-1). The multiple optical and electrochemical detection confirmed that combining ultrathin g-C₃N₄ and Bi₂WO₆ can increase carrier separation rate and prolong its lifetime. The quenching test revealed that h⁺ and ¹O₂ were the prominent reactive species. Additionally, after a 10-cycle photocatalytic process, the BWO-CN/PVDF membrane presented remarkable reusability and durability. And it showed excellent anti-fouling performance by filtering BSA, HA, SA, and Songhua River under simulated solar irradiation. The molecular dynamic (MD) simulation showed that the combination of g-C₃N₄ and Bi₂WO₆ can enhance the interaction between BWO-CN and PVDF. This work opens up a new idea for designing and constructing a highly efficient photocatalytic membrane for water treatment.

Dimensionality effects of g-C3N4 from wettability to solar light assisted self-cleaning and electrocatalytic oxygen evolution reaction

Unique interfacial properties of 2D materials make them more functional than their bulk counterparts in a catalytic application. In the present study, bulk and 2D graphitic carbon nitride nanosheet (bulk g-C₃N₄ and 2D-g-C₃N₄ NS) coated cotton fabrics and nickel foam electrode interfaces have been applied for solar light-driven self-cleaning of methyl orange (MO) dye and electrocatalytic oxygen evolution reaction (OER), respectively. Compared to bulk, 2D-g-C₃N₄ coated interfaces show higher surface roughness (1.094 > 0.803) and enhanced hydrophilicity (θ ∼ 32° < 62° for cotton fabric and θ ∼ 25° < 54° for Ni foam substrate) due to oxygen defect induction as confirmed from morphological (HR-TEM and AFM) and interfacial (XPS) characterizations. The self-remediation efficiencies for blank and bulk/2D-g-C₃N₄ coated cotton fabrics are estimated through colorimetric absorbance and average intensity changes. The self-cleaning efficiency for 2D-g-C₃N₄ NS coated cotton fabric is 87%, whereas the blank and bulk-coated fabric show 31% and 52% efficiency. Liquid Chromatography-Mass Spectrometry (LC-MS) analysis determines the reaction intermediates for MO cleaning. 2D-g-C₃N₄ shows lower overpotential (108 mV) and onset potential (1.30 V) vs. RHE for 10 mA cm^-2 OER current density in 0.1 M KOH. Also, the decreased charge transfer resistance (R_CT = 12 Ω) and lower Tafel's slope (24 mV dec^-1) of 2D-g-C₃N₄ make it the most efficient OER catalyst over bulk-g-C₃N₄ and state-of-the-art material RuO₂. The pseudocapacitance behavior of OER governs the kinetics of electrode-electrolyte interaction through the electrical double layer (EDL) mechanism. The 2D electrocatalyst demonstrates long-term stability (retention ∼94%) and efficacy compared to commercial electrocatalysts.

SERS-based recyclable immunoassay mediated by 1T-2H mixed-phase magnetic molybdenum disulfide probe and 2D graphitic carbon nitride substrate

Recently, non-metallic SERS-based immunoassay has attracted much attention due to its attractive chemical enhancement (CM), chemical stability, and biocompatibility. Herein, metallic (1T)-semiconductor (2H) mixed-phase magnetic molybdenum disulfide (MoS₂) was rationally developed and combined with two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) nanosheets to realize a SERS-based recyclable immunoassay of CA125. The Fe₃O₄ core promoted the reliable stacking of MoS₂ nanoflakes into a flower-like shape with fully-exposed active surface. Particularly, the existence of 1T phase facilitated a noble-metal-comparable SERS activity due to the high electron density-induced charge transfer process with elevated efficiency. Moreover, a conversion from bulk to 2D nanosheet was swimmingly achieved for g-C₃N₄ via acid etching, whose large surface area full of active electrons and functional groups triggered an enhancement factor (EF) of 7.8 × 10⁶. Based on a typical sandwich immunostructure, a limit of detection (LOD) as 4.96 × 10^-4 IU/mL was demonstrated for CA125 in a recyclable process. Finally, such an immunosensor was employed to analyze clinical samples, indicating its prodigious potentiality in the early recognition and monitoring of cancer.

Insights into engineered graphitic carbon nitride quantum dots for hazardous contaminants degradation in wastewater

Increased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C₃N₄) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C₃N₄ QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C₃N₄ QD-based materials. Furthermore, this review discusses the practical applications of g-C₃N₄ QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C₃N₄ QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C₃N₄ QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.

Emerging Graphitic Carbon Nitride-based Nanobiomaterials for Biological Applications

Graphitic carbon nitride (g-CN) based nanostructures are distinctive materials with unique compositional, structural, optical, and electronic properties with exceptional band structure, moderate surface area, and exceptional thermal and chemical stability. Because of these properties, g-CN based nanomaterials have shown promising applications and higher performance in the biological avenue. This review covers the state-of-the-art synthetic strategies used for the preparation of the materials, the basic structure, and a panorama of different optimization strategies leading to improved physicochemical properties responsible for the biological application. The following sections include the recent progress in the use of g-CN based nanobiomaterials for biosensors, bioimaging, photodynamic therapy, drug delivery, chemotherapy, and the antimicrobial segment. Furthermore, we have summarized the role and evaluation of biosafety and biocompatibility of the material. Finally, the unresolved issues, plausible challenges, current status, and future perspectives for the development and design of g-CN have been summarized and are expected to promote a clinical path for the medical sector and human well-being.

Facile Synthesis and Characterization of Cupric Oxide Loaded 2D Structure Graphitic Carbon Nitride (g-C3N4) Nanocomposite: In Vitro Anti-Bacterial and Fungal Interaction Studies

The active and inexpensive catalyst cupric oxide (CuO) loaded foliar fertilizer of graphitic carbon nitride (g-C3N4) is investigated for biological applications due to its low cost and easy synthesis. The synthesized CuO NPs, bulk g-C3N4, exfoliated g-C3N4, and different weight percentages of 30 wt%, 40 wt%, 50 wt%, 60 wt%, and 70 wt% CuO-loaded g-C3N4 are characterized using different analytical techniques, including powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and ultraviolet-visible spectroscopy. The nanocomposite of CuO NPs loaded g-C3N4 exhibits antibacterial activity against Gram-positive bacteria (Staphylococcus aureus and Streptococcus pyogenes) and Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). The 20 μg/mL of 70 wt% CuO/g-C3N4 nanocomposite showed an efficiency of 98% for Gram-positive bacteria, 80% for E. Coli, and 85% for P. aeruginosa. In the same way, since the 70 wt% CuO/g-C3N4 nanocomposite showed the best results for antibacterial activity, the same compound was evaluated for anti-fungal activity. For this purpose, the fungi Fusarium oxysporum and Trichoderma viride were used. The anti-fungal activity experiments were not conducted in the presence of sunlight, and no appreciable fungal inhibition was observed. As per the literature, the presence of the catalyst g-C3N4, without an external light source, reduces the fungal inhibition performance. Hence, in the future, some modifications in the experimental conditions should be considered to improve the anti-fungal activity.

Polyamide membranes with nanoscale ordered structures for fast permeation and highly selective ion-ion separation

Fast permeation and effective solute-solute separation provide the opportunities for sustainable water treatment, but they are hindered by ineffective membranes. We present here the construction of a nanofiltration membrane with fast permeation, high rejection, and precise Cl^-/SO₄^2- separation by spatial and temporal control of interfacial polymerization via graphitic carbon nitride (g-C₃N₄). The g-C₃N₄ nanosheet binds preferentially with piperazine and tiles the water-hexane interface as revealed by molecular dynamics studies, thus lowering the diffusion rate of PIP by one order of magnitude and restricting its diffusion pathways towards the hexane phase. As a result, membranes with nanoscale ordered hollow structure are created. Transport mechanism across the structure is clarified using computational fluid dynamics simulation. Increased surface area, lower thickness, and a hollow ordered structure are identified as the key contributors to the water permeance of 105 L m²·h^-1·bar^-1 with a Na₂SO₄ rejection of 99.4% and a Cl^-/SO₄^2- selectivity of 130, which is superior to state-of-the-art NF membranes. Our approach for tuning the membrane microstructure enables the development of ultra-permeability and excellent selectivity for ion-ion separation, water purification, desalination, and organics removal.

Simultaneous degradation and separation of antibiotics in sewage effluent by photocatalytic nanofiltration membrane in a continuous dynamic process

Bifunctional photocatalytic nanofiltration (PNF) membrane is increasingly concerned in practical micro-polluted water purification, but there are still several bottlenecks that inhibit its practicality. In this context, the feasibility of a novel metal-free and visible light-responsive surface-anchored PNF membrane for simultaneously removing target antibiotics in real sewage effluent in a continuous dynamic process was explored. The results showed that the optimal PNF-4 membrane was expectedly consisted of an inside tight sub-nanopore structured separation layer and an outside thinner, smoother, super hydrophilic mesoporous degradation layer, respectively. Consequently, the activated PNF-4 membrane could synergistically reduce trimethoprim and sulfamethoxazole concentrations to below two orders of magnitude, accompanying with almost constant high water permeability, suggesting that the hydrophilic modification of the mesoporous degradation layer basically offsets its inherent hydraulic resistance. Also, after repeating the fouling-physical rinsing process three times lasted for 78 h, only sporadic adherent contaminants remained onto the top surface, together with the minimal total and irreversible fouling ratios (as low as 7.2% and 1.2%, respectively), strongly demonstrated that PNF-4 membrane displayed good self-cleaning performance. Undoubtedly, this will significantly reduce its potential cleaning frequency and maintenance cost in long-term operation. Meanwhile, the acute and chronic biotoxicities of its permeate to Virbrio qinghaiensis sp. -67 were also reduced sharply to 2.22% and 0.45%, respectively. All of these evidences suggest that the dual functions of PNF-4 membrane are synergetic in an uninterrupted permeating process. It will provide useful insights for continuously enhancing the practicality and effectiveness of PNF membrane in actual micro-polluted water purification scenarios.

Synthesis and applications of graphitic carbon nitride (g-C3N4) based membranes for wastewater treatment: A critical review

Semiconducting membrane combined with nanomaterials is an auspicious combination that may successfully eliminate diverse waste products from water while consuming little energy and reducing pollution. Creating an inexpensive, steady, flexible, and diversified business material for membrane production is a critical challenge in membrane technology development. Because of its unusual structure and high catalytic activity, graphitic carbon nitride (g-C3N4) has come out as a viable material for membranes. Furthermore, their great durability, high permanency under challenging environments, and long-term use without decrease in flux are significant advantages. The advanced material techniques used to manage the molecular assembly of g-C3N4 for separation membrane were detailed in this review work. The progress in using g-C3N4-based membranes for water treatment has been detailed in this presentation. The review delivers an updated description of g-C3N4 based membranes and their separation functions and new ideas for future enhancements/adjustments to address their weaknesses in real-world situations. Finally, the ongoing problems and promising future research directions for g-C3N4-based membranes are discussed.

Silicon carbide catalytic ceramic membranes with nano-wire structure for enhanced anti-fouling performance

Membrane fouling is a critical challenge for current ceramic membranes, which suffer from low flux and insufficient removal. Development of self-cleaning catalytic ceramic membranes is promising to address this challenge. Herein, we design heterogeneous silicon carbide ceramic membranes featuring a novel structure of g-C₃N₄-decorated β-SiC nano-wire catalytic functional layer, which enables enhanced anti-fouling self-cleaning performance. At chemical harsh (alkaline or especially acidic) conditions, the nano-wire membrane exhibits catalysis-enhanced removal performance for organic contaminants. Unlike conventional particle-packing membrane structure, such a nano-wire network membrane structure has not only high porosity (56.1%), but exceptional water permeance (110 L·m^-2·h^-1·bar^-1) and removal (100%) of organic substance under simulated sunlight, outperforming state-of-the-art organic membranes and ceramic membranes. Superoxide radical (∙O₂^-) was experimentally confirmed to be major reactive species responsible for self-cleaning function. We also propose a catalytic mechanism model with radical formation pathway, enabled by the as-formed g-C₃N₄@β-SiC heterojunction structure with reduced electron-hole recombination. This work would provide new insights into not only rational design of next-generation ceramic membranes with self-cleaning function but also more applications of efficient treatment of refractory wastewaters containing degradable organic substances by using such membranes.

Synthesis and microwave absorption studies on 2D graphitic carbon nitride loaded polyaniline/polyvinyl alcohol nanocomposites

A light weight electromagnetic interference (EMI) shielding and microwave absorbing composite films has been developed by loading varying weight content of graphitic carbon nitride (g-C3N4) nanosheets and polyaniline (PANI) into polyvinyl alcohol (PVA) matrix. The prepared PVA/PANI/g-C3N4 (1%, 3%, 5%) composites has been subjected to FTIR, X-Ray powder diffraction, SEM, Thermal studies, Dielectric studies and electromagnetic shielding effectiveness (EMI SE) analysis. The PVA/PANI/g-C3N4 (1%, 3%, 5%) composites was discovered to have improved electrical conductivity, dielectric loss, and dielectric constant. It is observed from the SEM images that the sheet layers of g-C3N4 are wrapped by the polymer matrix and the morphology to PVA/PANI composite in the g-C3N4 indicates homogeneous blending of PVA/PANI without any phase separation and has porous in it. The PANI/g-C3N4 fractured surfaces present are smooth but irregular in appearance indicating good compatibility between the PVA and PANI matrices. The dielectric properties was found to increase on increasing the concentration of the g-C3N4 nanofiller and reached a maximum of 9.8 × 106 at 1 MHz for 3% g-C3N4 in PVA/PANI. The incorporation of g-C3N4 into PVA/PANI enhanced the conductivity and the 5% g-C3N4 loaded composite film exhibited a conductivity value of 0.043 S/cm at 1 MHz. The PVA/PANI/g-C3N4 (1%, 3%, 5%) composites exhibited potential EMI SE values ranging from 24 to 35 dB at 8.6 GHz and from 42 to 63 dB at 12.4 GHz, for instance the PVA/PANI/g-C3N4 5% composite showed highest value of 63 dB at 12.4 GHz. The PVA/PANI/g-C3N4 5% exhibits the maximum highest reflection loss 8 GHz–12 GHz in which the higher absorption of −36 dB is observed at 10.3 GHz of the X-band region.

Fast hydrogen purification through graphitic carbon nitride nanosheet membranes

Two-dimensional graphitic carbon nitride (g-C₃N₄) nanosheets are ideal candidates for membranes because of their intrinsic in-plane nanopores. However, non-selective defects formed by traditional top-down preparation and the unfavorable re-stacking hinder the application of these nanosheets in gas separation. Herein, we report lamellar g-C₃N₄ nanosheets as gas separation membranes with a disordered layer-stacking structure based on high quality g-C₃N₄ nanosheets through bottom-up synthesis. Thanks to fast and highly selective transport through the high-density sieving channels and the interlayer paths, the membranes, superior to state-of-the-art ones, exhibit high H₂ permeance of 1.3 × 10⁻⁶mol m⁻² s⁻¹ Pa⁻¹ with excellent selectivity for multiple gas mixtures. Notably, these membranes show excellent stability under harsh practice-relevant environments, such as temperature swings, wet atmosphere and long-term operation of more than 200 days. Therefore, such lamellar membranes with high quality g-C₃N₄ nanosheets hold great promise for gas separation applications.

In this work, lamellar graphitic carbon nitride nanosheet membranes are constructed for gas separation. Benefiting from their high-density intrinsic in-plane nanopores and broader permeable interlayer channels, the proposed membranes exhibit high H₂ permeance with good selectivity of multiple gas mixtures.

Colloidal nanomaterials for water quality improvement and monitoring

Water is the most important resource for all kind forms of live. It is a vital resource distributed unequally across different regions of the globe, with populations already living with water scarcity, a situation that is spreading due to the impact of climate change. The reversal of this tendency and the mitigation of its disastrous consequences is a global challenge posed to Humanity, with the scientific community assuming a major obligation for providing solutions based on scientific knowledge. This article reviews literature concerning the development of nanomaterials for water purification technologies, including collaborative scientific research carried out in our laboratory (nanoLAB@UA) framed by the general activities carried out at the CICECO-Aveiro Institute of Materials. Our research carried out in this specific context has been mainly focused on the synthesis and surface chemical modification of nanomaterials, typically of a colloidal nature, as well as on the evaluation of the relevant properties that arise from the envisaged applications of the materials. As such, the research reviewed here has been guided along three thematic lines: 1) magnetic nanosorbents for water treatment technologies, namely by using biocomposites and graphite-like nanoplatelets; 2) nanocomposites for photocatalysis (e.g., TiO2/Fe3O4 and POM supported graphene oxide photocatalysts; photoactive membranes) and 3) nanostructured substrates for contaminant detection using surface enhanced Raman scattering (SERS), namely polymers loaded with Ag/Au colloids and magneto-plasmonic nanostructures. This research is motivated by the firm believe that these nanomaterials have potential for contributing to the solution of environmental problems and, conversely, will not be part of the problem. Therefore, assessment of the impact of nanoengineered materials on eco-systems is important and research in this area has also been developed by collaborative projects involving experts in nanotoxicity. The above topics are reviewed here by presenting a brief conceptual framework together with illustrative case studies, in some cases with original research results, mainly focusing on the chemistry of the nanomaterials investigated for target applications. Finally, near-future developments in this research area are put in perspective, forecasting realistic solutions for the application of colloidal nanoparticles in water cleaning technologies.

Purifying water with silver nanoparticles (AgNPs)-incorporated membranes: Recent advancements and critical challenges

In the face of the growing global water crisis, membrane technology is a promising means of purifying water and wastewater. Silver nanoparticles (AgNPs) have been widely used to improve membrane performance, for antibiofouling, and to aid in photocatalytic degradation, thermal response, and electro-conductivity. However, several critical issues such as short antimicrobial periods, trade-off effects and silver inactivation seriously restrict the engineering application of AgNPs-incorporated membranes. In addition, there is controversy around the use of AgNPs given the toxic preparation process and environmental/biological risks. Hence, it is of great significance to summarize and analyze the recent developments and critical challenges in the use of AgNPs-incorporated membranes in water and wastewater treatment, and to propose potential solutions. We reviewed the different properties and functions of AgNPs and their corresponding applications in AgNPs-incorporated membranes. Recently, multifunctional, novel AgNP-incorporated membranes combined with other functional materials have been developed with high-performance. We further clarified the synergistic mechanisms between AgNPs and these novel nanomaterials and/or polymers, and elucidated their functions and roles in membrane separation. Finally, the critical challenges of AgNPs-incorporated membranes and the proposed solutions were outlined: i) Prolonging the antimicrobial cycle through long-term and controlled AgNPs release; ii) Overcoming the trade-off effect and organic fouling of the AgNPs-incorporated membranes; iii) Preparation of sustainable AgNPs-incorporated membranes; iv) Addressing biotoxicity induced by AgNPs; and v) Deactivation of AgNPs-incorporated membrane. Overall, this review provides a comprehensive discussion of the advancements and challenges of AgNPs-incorporated membranes and guides the development of more robust, multi-functional and sustainable AgNPs-incorporated membranes.

Development of Adsorptive Membranes for Selective Removal of Contaminants in Water

The presence of arsenic and ammonia in ground and surface waters has resulted in severe adverse effects to human health and the environment. Removal technologies for these contaminants include adsorption and membrane processes. However, materials with high selectivity and pressure stability still need to be developed. In this work, adsorbents and adsorptive membranes were prepared using nanostructured graphitic carbon nitride decorated with molecularly imprinted acrylate polymers templated for arsenate and ammonia. The developed adsorbent removed arsenate at a capacity and selectivity similar to commercial ion-exchange resins. Ammonia was removed at higher capacity than commercial ion exchange resins, but the adsorbent showed lower selectivity. Additionally, the prepared membranes removed more arsenate and ammonia than non-imprinted controls, even in competition with abundant ions in water. Further optimization is required to improve pressure stability and selectivity.

Nitrobenzene inarched carbon nitride nanotube drives efficient directional carriers separation for superior photocatalytic hydrogen production

Carbon nitride (g-C₃N₄) is aussichtsreich for photocatalytic hydrogen evolution, but its photocatalytic activity is not ideal due to the existence of photogenerated electrons and holes in the form of excitons. Herein, a novel nitrobenzene inarched g-C₃N₄ nanotube photocatalyst (CN-DNP) was firstly fabricated via a facial copolymerization method. The aromatic ring in nitrobenzene could enhance the conjugation of carbon nitride to promote electron delocalization. The nitro group enabled electrons to transfer from center to the both ends of g-C₃N₄ nanotube, which drove the separation of photogenerated electrons and holes more effectively. Compared with bulk g-C₃N₄ (CN), CN-DNP had narrower bandgap that can acquire adequate visible light harvesting and improve its photocatalytic performance. Consequently, CN-DNP0.1 displayed an excellent photocatalytic H₂ evolution of 2262.4 μmol g^-1h^-1, which was 11.2 folds higher than that of CN. This strategy provides a new guidance for constructing carbon nitride nanotube materials with carrier directional transfer to enhance the photocatalytic performance.

Color removal from wastewater using a synthetic high-performance antifouling GO-CPTMS@Pd-TKHPP/polyether sulfone nanofiltration membrane

Modified graphene oxide with 5,10,15,20-tetrakis-(4-hexyloxyphenyl)-porphyrin and palladium (II) (signified by GO-CPTMS@Pd-TKHPP) prepared as a novel antifouling polyether sulfone (PES) blended nanofiller membrane. The membrane efficiency has been analyzed such as pure water flux (PWF), hydrophilicity, and antifouling features. By increasing of modified graphene oxide percentage from 0 to 0.1 wt.% in the polymer matrix, the PWF was incremented from 14.35 to 37.33 kg/m2·h at 4 bar. The membrane flux recovery ratio (FRR) has been investigated by applying powdered milk solution; the FRR results indicated that the 0.1 wt.%-modified graphene oxide membrane showed a positive effect on fouling behavior with Rir and FRR value 8.24% and 91.76%, respectively. The nanofiltration membrane performance was assessed applying the Direct Red 16 dye rejection. It was demonstrated that the optimal membranes (0.1 wt.%-modified graphene oxide) had notable dye removal (99.58% rejection). The results are also verified by measuring the scanning electron microscopy (SEM), water contact angle (WCA), and atomic microscopy analysis (AFM).

Recent developments in architecturing the g-C3N4 based nanostructured photocatalysts: Synthesis, modifications and applications in water treatment

Water pollution is becoming an inevitable problem in today's world. Tons and tons of wastewater with hazardous pollutants are getting discharged into the clean water bodies every day. In this regard, photocatalytic environmental remediation using nanotechnology such as the use of organic, metal and non-metal based semiconductor photocatalysts for photodegradation of pollutants has gained enormous attention in the past few decades. This review is focused particularly on graphitic carbon nitride (g-C₃N₄) which is a cheap, metal-free, polymeric photoactive compound and it is used as a potential photocatalyst in wastewater treatment. Though, pristine g-C₃N₄ is a good photocatalyst, it has certain drawbacks such as poor visible light absorption capacity, quicker recombination of photoelectrons and holes, delayed mass and charge transfer, etc. As a result, the pristine g-C₃N₄ catalyst is modified into novel 0D, 1D, 2D and 3D morphologies such as nano-quantum dots, nanorods, nanotubes, nanowires, nanosheets, nanoflakes, nanospheres, nanoshells, etc. It was also tailored into novel composites along with various compounds through doping, metal deposition, heterojunction formation, etc., to enhance the photocatalytic property of pure g-C₃N₄. The modified catalysts showed promising photocatalytic performance such as degradation of majority of pollutants in the environment. It also showed excellent results in the removal or reduction of heavy metals. This review provides a detailed record of g-C₃N₄ and its diverse photocatalytic applications in the past years and it provides knowledge for the development of such similar novel compounds in the future.

Exfoliation method matters: The microstructure-dependent photoactivity of g-C3N4 nanosheets for water purification

Exfoliation of carbon nitride (g-C₃N₄) into an ultrathin nanostructure significantly improves its photoactivity. However, the effects of the exfoliation method on the microstructure and photocatalytic performance of g-C₃N₄ nanosheets remain largely unknown. Herein, several typical strategies, such as thermal, chemical, ultrasonic and one-step exfoliation, were applied to exfoliate g-C₃N₄ nanosheets for photocatalytic applications. A procedure capable of controlling the morphology, microstructure, light-absorption property, and visible light photoactivity of g-C₃N₄ nanosheets was attempted. We found that nanosheets prepared from one-step exfoliation present superior photocatalytic efficiency under visible light than those fabricated by thermal exfoliation and ultrasonic exfoliation. The kinetic constants for bisphenol A (BPA) photodegradation over these samples were determined to be 6.5, 4.5 and 2.3 times higher than bulk g-C₃N₄, respectively. For chemical exfoliation, excessive oxidation by H₂SO₄ can lead to the structural defects and deactivation of urea-derived g-C₃N₄ nanosheets. Carbon nitride nanosheets synthesized by one-step exfoliation exhibited high specific surface area, optimal band gap energy structure, and high charge separation efficiency, thereby increasing visible-light photoactivity. Enabling cost-effective production of ultrathin and robust g-C₃N₄ nanosheets, one-step exfoliation offers a potential strategy to exploit high-performance g-C₃N₄ for water purification applications.

Recent Advancement of the Current Aspects of g-C3 N4 for its Photocatalytic Applications in Sustainable Energy System

Being one of the foremost enticing and intriguing innovations, heterogeneous photocatalysis has also been used to effectively gather, transform, and conserve sustainable sun's radiation for the production of efficient and clean fossil energy as well as a wide range of ecological implications. The generation of solar fuel-based water splitting and CO₂ photoreduction is excellent for generating alternative resources and reducing global warming. Developing an inexpensive photocatalyst can effectively split water into hydrogen (H₂ ), oxygen (O₂ ) sources, and carbon dioxide (CO₂ ) into fuel sources, which is a crucial problem in photocatalysis. The metal-free g-C₃ N₄ photocatalyst has a high solar fuel generation potential. This review covers the most recent advancements in g-C₃ N₄ preparation, including innovative design concepts and new synthesis methods, and novel ideas for expanding the light absorption of pure g-C₃ N₄ for photocatalytic application. Similarly, the main issue concerning research and prospects in photocatalysts based g-C₃ N₄ was also discussed. The current dissertation provides an overview of comprehensive understanding of the exploitation of the extraordinary systemic and characteristics, as well as the fabrication processes and uses of g-C₃ N₄ .