Fireproofing of domestic upholstered furniture: Migration of flame retardants and potential risks

Tributyl phosphate can inhibit the feeding behavior of rotifers by altering the axoneme structure, neuronal coordination and energy supply required for motile cilia

Organophosphorus flame retardants (OPFRs) are frequently detected in aquatic environments and can potentially amplify the food chain, posing a potential risk to organisms. Marine invertebrates have primitive nervous systems to regulate behavior, but how they respond to OPFRs that are potentially neurotoxic substances is unclear. This study assessed changes in the feeding behavior of rotifer Brachionus plicatilis exposed to alkyl OPFRs tributyl phosphate (TnBP) (0.376 nM, 3.76 and 22.53 µM) to elucidate the mechanism of behavioral toxicity. TnBP at 22.53 μM reduced the ingestion and filtration rates of rotifers for Chlorella vulgaris and Phaeocystis globosa in a 24-h test and altered rotifer-P. globosa population dynamics in 15-d coculture. Ciliary beat frequency was also reduced, and the expression of genes encoding the cilia axoneme was downregulated. TnBP could inhibit rotifer acetylcholinesterase activity by binding this protein and reduce the expression of the exocytotic membrane protein syntaxin-4, suggesting a disorder in nervous regulation of cilia beat. Moreover, TnBP induced abnormal shape and dysfunction of mitochondria, which caused insufficient energy required for ciliary movement. This study revealed diverse neurotoxicity mechanisms of TnBP, particularly as a potentially competing acetylcholinesterase ligand for aquatic invertebrates. Our research also provides a meaningful reference for OPFR-induced behavioral toxicity assessments.

A biomimetic structured bio-based flame retardant coating on flexible polyurethane foam with low smoke release and antibacterial ability

Flexible polyurethane foam (FPUF) is widely used in our life, but it is inherent flammable. The demand for environmental-friendly multi-functional FPUF has been increasing rapidly in the last decade. In this work, a novel bio-based flame retardant coating was constructed by chemically reacting sodium alginate (OSA) and polydopamine (PDA) on the FPUF, followed by depositing nanorod-like β-FeOOH molecules through complexation reaction to form a biomimetic structure. The limiting oxygen index of the coated FPUF samples reached 25.5%. The peak heat release rate was reduced by 45.0%, and the smoke density of the coated sample was decreased by 69.1% compared to that of the control FPUF sample. It was proposed that the OSA-PDA-β-FeOOH decomposed during combustion to promote the formation of compact crosslinked char and released inert gases to dilute the combustible gases, and the β-FeOOH transferred to Fe₂O₃ to settled the smoke particles reducing the smoke release. Furthermore, the coating with shark skin like structure endowed FPUF antibacterial ability because of its good superoleophobicity underwater. This work provided a novel strategy to construct a biomimetic multifunctional coating on the FPUF.

The Effect of Selected Factors on the Strength of Stitches of Upholstery Faux Leather

With their properties, upholstery covering materials significantly influence the quality of upholstered products. These materials form the surface layer of upholstered furniture; any damage to this material is immediately visible to the user. We consider the stitches connecting the covering fabrics to be one of the critical points of the upholstered surface, therefore they must have the required strength. Faux leather is one of the most used upholstery materials. The main aim of the paper is to determine the effect of upholstery faux leather, stitch length, point needle, and needle size on the strength of the stitches and the seam efficiency. The results of the experiment proved the suitability of using a sewing needle LR for joining covering materials such as faux leathers. The highest force to seam a rupture in the joints was achieved in the direction of the warp yarns of the underlying layer of PU (Polyurethane) faux leather with a stitch length of 4 mm and needle type LR/90. The highest seam efficiency was achieved with seams in the direction of the weft yarns of the PVC (Polyvinyl chloride) faux leather underlying layer with a stitch length of 4 mm and needle type LR/90. If the underlying layer of faux leather is a fabric with canvas binding, a higher seam efficiency of joints is assumed.

Environmental, Health, and Legislation Considerations for Rational Design of Nonreactive Flame-Retardant Additives for Polymeric Materials: Future Perspectives

Increasing polymer usage has demanded functional additives that decrease fire hazards for end users. While traditional flame-retardant (FR) additives, such as halogenated, phosphorus, and metal hydroxides, greatly reduce flammability and associated fire hazards, research has continually exposed a litany of health and environmental safety concerns. This perspective aims to identify the key components of a successful FR additive and address material, environmental, and health concerns of existing additives. Legislation surrounding FRs and persistent organic pollutants is also discussed to highlight political perception that has resulted in the increased chemical regulations and subsequent banning of FR additives. Finally, future directions of this field regarding nonreactive additives, focusing on the use of bioinspired materials and transition metal chemistries to produce alternatives for polymers with efficacies surpassing traditional additives are presented.

Dermal uptake of chlorinated organophosphate flame retardants via contact with furniture fabrics; implications for human exposure

The chlorinated organophosphate flame retardants (Cl-PFRs): tris-(2-chloroethyl)-phosphate (TCEP), tris-(1-chloro-2-propyl)-phosphate (TCIPP) and tris-(1,3-dichloropropyl)-phosphate (TDCIPP), have been widely used in upholstered furniture despite their carcinogenic potential. Although Cl-PFRs are mainly added to furniture foam, they are present in the fabrics likely due to migration from the foam. While several studies have assessed human exposure to Cl-PFRs via different pathways, no information exists on dermal uptake of these chemicals through contact with fabrics. In the current study, dermal absorption of TCEP, TCIPP and TDCIPP from 3 UK domestic furniture fabrics was experimentally assessed for the first time using in vitro 3D-human skin equivalents (EpiSkin™) under different real-life exposure scenarios. Results revealed all 3 target Cl-PFRs were dermally bioavailable to varying degrees (3.5%-25.9% of exposure dose) following 24 h contact with the studied fabrics. Estimated permeability coefficients (K_P, cm h^-1) showed TCEP had the highest percutaneous penetration potential followed by TCIPP, then TDCIPP. Further investigation revealed human dermal uptake of Cl-PFRs can be influenced by several factors including: the specific physicochemical properties of the compound, the type of exposure matrix, the exposure dose and the degree of skin hydration at the point of contact. Exposure assessment revealed UK adults and toddlers can be exposed to 20.4 and 14.1 ng TCIPP/kg bw/day via contact with furniture fabrics in summer, which is higher than international average exposures via inhalation and dust ingestion for adults and dietary exposure for toddlers. Therefore, risk assessment studies for Cl-PFRs and future replacements should consider dermal contact with consumer products (e.g. furniture fabrics) as a potential significant human exposure pathway.

Study on the Influence of Selected Fabrics and Stitching on the Strength of Upholstery Covers

So far, no coherent and comprehensive method has been elaborated allowing investigation of tensile strength of upholstery seams dedicated to upholstered furniture. Producers of this type of furniture are interested in the assessment of the quality of upholstery material joints, which seems to be particularly important for ensuring the appropriate quality of products. Therefore, the objective of this research was to investigate the influence of the type of material used and the direction of the fabric cut on the strength of upholstery covers. Static tensile testing of selected upholstery fabric samples was performed, and an attempt was made to identify the most optimal fabric–seam joints. It was stated as a conclusion that the fabric tensile strength was the highest for Secret 10 fabric. In addition, the strength of upholstery covers is not influenced by the direction of the fabric die cut. For each fabric, a different configuration is preferable, as shown by results (Power 13: A-B, Secret 10: B-B, Soft 10: A-A). The method, implemented for upholstered furniture, allows for an objective assessment of the strength of upholstery covers and the selection of the most advantageous fabric–seam combination for future furniture designs.

Hormetic dose responses induced by organic flame retardants in aquatic animals: Occurrence and quantification

The organic flame retardants (OFRs) have attracted global concerns due to their potential toxicity and ubiquitous presence in the aquatic environment. Hormesis refers to a biphasic dose response, characterized by low-dose stimulation and high-dose inhibition. The present study provided substantial evidence for the widespread occurrence of OFRs-induced hormesis in aquatic animals, including 202 hormetic dose response relationships. The maximum stimulatory response (MAX) was commonly lower than 160% of the control response, with a combined value of 134%. Furthermore, the magnitude of MAX varied significantly among multiple factors and their interactions, such as chemical types and taxonomic groups. Moreover, the distance from the dose of MAX to the no-observed-adverse-effect-level (NOAEL) (NOAEL: MAX) was typically below 10-fold (median = 6-fold), while the width of the hormetic zone (from the lowest dose inducing hormesis to the NOAEL) was approximately 20-fold. Collectively, the quantitative features of OFRs-induced hormesis in aquatic animals were in accordance with the broader hormetic literature. In addition, the implications of hormetic dose response model for the risk assessment of OFRs were discussed. This study offered a novel insight for understanding the biological effects of low-to-high doses of OFRs on aquatic animals and assessing the potential risks of OFRs in the aquatic environment.

Enhancing the flame retardancy and UV resistance of polyamide 6 by introducing ternary supramolecular aggregates

An integrated multi-functional additive was fabricated by successively grafting melamine (MEL) and phytic acid (PhA) on multiwalled carbon-nanotubes (MWNCTs), and was then applied in PA6 to improve the flame retardancy and light aging resistance of the composite. The limit oxygen index of PA6 composite containing 7 wt% PhA-MEL-MWCNTs was increased to 26.4 from 21.0. The smoke and CO release were significantly reduced by 48% and 88% respectively, and the severe melt dripping of PA6 in burning was eliminated. It is proved that PhA-MEL-MWCNTs can absorb ultraviolet (UV) radiation, and hence significantly reduces the mechanical property loss of the PA6 composite after UV aging. The tensile strength of the aged PA6/7 wt%PhA-MEL-MWCNTs composite sample only decreased by 18.1%, which was significantly lower than the loss rate of the control aged PA6 sample (62.5%). This protocol provides a new opportunity for fabricating long-life flame retardant polyamide composites.

Assessment of gas-phase concentrations of organophosphate flame retardants at the material surface using a midget emission cell coupled to solid-phase microextraction

Actual methods for on-site measurement of gaseous concentrations of Semi-Volatile Organic Compounds (SVOCs) at the material surface (y⁰) are not yet sufficiently developed mainly due to sampling difficulties. These concentrations are the key data to improve knowledge about indoor sources and human exposure to SVOCs. To the end, a specific emission cell coupled to solid-phase microextraction (SPME) was developed. The main challenge with this method is calibration because of very low volatility of SVOCs and static sampling mode. In this study, a generating system of organophosphate flame retardants (OFRs) using polyurethane foam as source combined with an active sampling method with Tenax tubes was proposed as a novel calibration device for SPME-based method. The generating system delivered stable OFR concentrations after 190 h of operation with a variation not exceeding ±5%. It allowed to obtain robust calibrations for tris-(2-chloropropyl)-phosphate (TCPP) and tri-butyl-phosphate (TBP) measured with the emission cell coupled to SPME-based method, define the optimal sampling requirements and achieve reproducible and accurate measurements of y⁰ at μg.m^-3 level. TCPP and TBP gas-phase concentrations at the polyurethane foam surface (y⁰) were followed up over more 228 days under controlled temperature conditions. A high stability of these concentrations was observed showing that polyurethane foam acts as a stable and continuous source of organophosphate flame retardants indoors. This novel method should be useful for assessing the dynamic of emissions from indoor sources and potential exposure to SVOCs in indoor environments.

Preparation of Flame-Retardant Polyurethane and Its Applications in the Leather Industry

As a novel polymer, polyurethane (PU) has been widely applied in leather, synthetic leather, and textiles due to its excellent overall performance. Nevertheless, conventional PU is flammable and its combustion is accompanied by severe melting and dripping, which then generates hazardous fumes and gases. This defect limits PU applications in various fields, including the leather industry. Hence, the development of environmentally friendly, flame-retardant PU is of great significance both theoretically and practically. Currently, phosphorus-nitrogen (P-N) reactive flame-retardant is a hot topic in the field of flame-retardant PU. Based on this, the preparation and flame-retardant mechanism of flame-retardant PU, as well as the current status of flame-retardant PU in the leather industry were reviewed.

Inevitable human exposure to emissions of polybrominated diphenyl ethers: A perspective on potential health risks

Polybrominated diphenyl ethers (PBDEs) serve as flame retardants in many household materials such as electrical and electronic devices, furniture, textiles, plastics, and baby products. Though the use of PBDEs like penta-, octa- and deca-BDE greatly reduces the fire damage, indoor pollution by these toxic emissions is ever-growing. In fact, a boom in the global market projections of PBDEs threatens human health security. Therefore, efforts are made to minimize PBDEs pollution in USA and Europe by encouraging voluntary phasing out of the production or imposing compelled regulations through Stockholm Convention, but >500 kilotons of PBDEs still exist globally. Both 'environmental persistence' and 'bioaccumulation tendencies' are the hallmarks of PBDE toxicities; however, both these issues concerning household emissions of PBDEs have been least addressed theoretically or practically. Critical physiological functions, lipophilicity and toxicity, trophic transfer and tissue specificities are of utmost importance in the benefit/risk assessments of PBDEs. Since indoor debromination of deca-BDE often yields many products, a better understanding on their sorption propensity, environmental fate and human toxicities is critical in taking rigorous measures on the ever-growing global deca-BDE market. The data available in the literature on human toxicities of PBDEs have been validated following meta-analysis. In this direction, the intent of the present review was to provide a critical evaluation of the key aspects like compositional patterns/isomer ratios of PBDEs implicated in bioaccumulation, indoor PBDE emissions versus human exposure, secured technologies to deal with the toxic emissions, and human toxicity of PBDEs in relation to the number of bromine atoms. Finally, an emphasis has been made on the knowledge gaps and future research directions related to endurable flame retardants which could fit well into the benefit/risk strategy.

Polyimide-Based Foams: Fabrication and Multifunctional Applications

Because of their unique three-dimensional cellular structure and intrinsic properties, polyimide foam materials have bright prospects for development in multiple functional equipment, which arouses extensive concern. In this Spotlight on Applications, several typical fabrication methods of polyimide foams and the related synthesis mechanism have been systematically described. The advantages and disadvantages of the preparation methods have been compared with each other. Representative functions and the corresponding mechanism models have been concluded, which involve thermal, mechanical, sensing, electromagnetic, environmental, and electrical fields. In the end, the severe tasks and challenges of polyimide foam materials have been summarized, and their promising future development is worth expecting.