Novel nanocomposite derived from ZnO/CdS QDs embedded crosslinked chitosan: An efficient photocatalyst and effective antibacterial agent

Sustainable chitosan-based materials as heterogeneous catalyst for application in wastewater treatment and water purification: An up-to-date review

Water pollution is one of serious environmental issues due to the rapid development of industrial and agricultural sectors, and clean water resources have been receiving increasing attention. Recently, more and more studies have witnessed significant development of catalysts (metal oxides, metal sulfides, metal-organic frameworks, zero-valent metal, etc.) for wastewater treatment and water purification. Sustainable and clean catalysts immobilized into chitosan-based materials (Cat@CSbMs) are considered one of the most appealing subclasses of functional materials due to their high catalytic activity, high adsorption capacities, non-toxicity and relative stability. This review provides a summary of various upgrading renewable Cat@CSbMs (such as cocatalyst, photocatalyst, and Fenton-like reagent, etc.). As for engineering applications, further researches of Cat@CSbMs should focus on treating complex wastewater containing both heavy metals and organic pollutants, as well as developing continuous flow treatment methods for industrial wastewater using Cat@CSbMs. In conclusion, this review abridges the gap between different approaches for upgrading renewable and clean Cat@CSbMs and their future applications. This will contribute to the development of cleaner and sustainable Cat@CSbMs for wastewater treatment and water purification.

A comprehensive review on crosslinked network systems of zinc oxide-organic polymer composites

In recent years, the synergistic crosslinked networks formed by zinc oxide (ZnO) particles and organic polymers have gained significant attention. This importance is ascribed due to the valuable combination of low band gap containing ZnO particles with responsive behavior containing organic polymers. These properties of both ZnO and organic polymers make a suitable system of crosslinked ZnO-organic polymer composite (CZOPC) for various applications in the fields of biomedicine, catalysis, and environmental perspectives. The literature extensively provided the diverse morphologies and structures of CZOPC, and these architectural structures play a crucial role in determining their efficiency across various applications. Consequently, the careful design of CZOPC shapes tailored to specific purposes has become a focal point. This comprehensive review provides insights into the classifications, synthetic approaches, characterizations, and applications of ZnO particles decorated in organic polymers with crosslinked network. The exploration extends to the adsorption, environmental, catalytic, and biomedical applications of ZnO-organic polymer composites. Adopting a tutorial approach, the review systematically investigates and elucidates the applications of CZOPC with a comprehensive understanding of their diverse capabilities and uses.

Photochemical Strategies toward Precision Targeting against Multidrug-Resistant Bacterial Infections

Infectious diseases pose a serious threat and a substantial economic burden on global human and public health security, especially with the frequent emergence of multidrug-resistant (MDR) bacteria in clinical settings. In response to this urgent need, various photobased anti-infectious therapies have been reported lately. This Review explores and discusses several photochemical targeted antibacterial therapeutic strategies for addressing bacterial infections regardless of their antibiotic susceptibility. In contrast to conventional photobased therapies, these approaches facilitate precise targeting of pathogenic bacteria and/or infectious microenvironments, effectively minimizing toxicity to mammalian cells and surrounding healthy tissues. The highlighted therapies include photodynamic therapy, photocatalytic therapy, photothermal therapy, endogenous pigments-based photobleaching therapy, and polyphenols-based photo-oxidation therapy. This comprehensive exploration aims to offer updated information to facilitate the development of effective, convenient, safe, and alternative strategies to counter the growing threat of MDR bacteria in the future.

Zinc and sulfur functionalized biochar as a peroxydisulfate activator via deferred ultraviolet irradiation for tetracycline removal

To enhance the degradation of tetracycline class (TC) residuals of high-concentration from pharmaceutical wastewater, a novel zinc (Zn) and sulfur (S) functionalized biochar (SC-Zn), as a peroxydisulfate (PDS) activator, was prepared by two-step pyrolysis using ZnSO4 accumulated water-hyacinth. Results showed that the removal rate of 50, 150, and 250 mg per L TC reached 100%, 99.22% and 94.83% respectively, by the SC-Zn/PDS system at a dosage of 0.3 g per L SC-Zn and 1.2 mM PDS, via the deferred ultraviolet (UV) irradiation design. Such excellent performance for TC removal was due to the synergetic activation of PDS by the biochar activator and UV-irradiation with biochar as a responsive photocatalyst. The functionalization of the co-doped Zn and S endowed the biochar SC-Zn with a significantly enhanced catalytic performance, since Zn was inferred to be the dominant catalytic site for SO4˙- generation, while S played a key role in the synergism with Zn by acting as the primary adsorption site for the reaction substrates. The employed SC-Zn/PDS/UV system had excellent anti-interference under different environmental backgrounds, and compared with the removal rate of TC by adsorption of SC-Zn, the increasing rate in the SC-Zn/PDS/UV system (18.75%) was higher than the sum of the increases in the SC-Zn/PDS (9.87%) and SC-Zn/UV systems (3.34%), furtherly verifying the systematic superiority of this synergy effect. This study aimed to prepare a high-performance functionalized biochar activator and elucidate the rational design of deferred UV-irradiation of PDS activation to efficiently remove high-concentration antibiotic pollutants.

A review on chitosan/metal oxide nanocomposites for applications in environmental remediation

A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.

Research Progress of a Pesticide Polymer-Controlled Release System Based on Polysaccharides

In recent years, with the development of the nanomaterials discipline, many new pesticide drug-carrying systems-such as pesticide nano-metal particles, nano-metal oxides, and other drug-carrying materials-had been developed and applied to pesticide formulations. Although these new drug-loading systems are relatively friendly to the environment, the direct exposure of many metal nanoparticles to the environment will inevitably lead to potential effects. In response to these problems, organic nanomaterials have been rapidly developed due to their high-quality biodegradation and biocompatibility. Most of these organic nanomaterials were mainly polysaccharide materials, such as chitosan, carboxymethyl chitosan, sodium alginate, β-cyclodextrin, cellulose, starch, guar gum, etc. Some of these materials could be used to carry inorganic materials to develop a temperature- or pH-sensitive pesticide drug delivery system. Herein, the pesticide drug-carrying system developed based on polysaccharide materials, such as chitosan, was referred to as the pesticide polymer drug-carrying system based on polysaccharide materials. This kind of drug-loading system could be used to protect the pesticide molecules from harsh environments, such as pH, light, temperature, etc., and was used to develop the function of a sustained release, targeted release of pesticides in the intestine of insects, and achieve the goal of precise application, reduction, and efficiency of pesticides. In this review, the recent progress in the field of polysaccharide-based polymer drug delivery systems for pesticides has been discussed, and suggestions for future development were proposed based on the current situation.

Advanced bioremediation by an amalgamation of nanotechnology and modern artificial intelligence for efficient restoration of crude petroleum oil-contaminated sites: a prospective study

Crude petroleum oil spillage is becoming a global concern for environmental pollution and poses a severe threat to flora and fauna. Bioremediation is considered a clean, eco-friendly, and cost-effective process to achieve success among the several technologies adopted to mitigate fossil fuel pollution. However, due to the hydrophobic and recalcitrant nature of the oily components, they are not readily bioavailable to the biological components for the remediation process. In the last decade, nanoparticle-based restoration of oil-contaminated, owing to several attractive properties, has gained significant momentum. Thus, intertwining nano- and bioremediation can lead to a suitable technology termed 'nanobioremediation' expected to nullify bioremediation's drawbacks. Furthermore, artificial intelligence (AI), an advanced and sophisticated technique that utilizes digital brains or software to perform different tasks, may radically transfer the bioremediation process to develop an efficient, faster, robust, and more accurate method for rehabilitating oil-contaminated systems. The present review outlines the critical issues associated with the conventional bioremediation process. It analyses the significance of the nanobioremediation process in combination with AI to overcome such drawbacks of a traditional approach for efficiently remedying crude petroleum oil-contaminated sites.

The use of chitosan-based composites for environmental remediation: A review

The presence of hazardous pollutants in water sources as a result of industrial activities is a major environmental challenge that impedes the availability of safe drinking water. Adsorptive and photocatalytic degradative removal of various pollutants in wastewater have been recognized as cost-effective and energy-efficient strategies. In addition to its biological activity, chitosan and its derivatives are considered as promising materials for the removal of various pollutants. The abundance of hydroxyl and amino groups in the chitosan macromolecular structure results in a variety of concurrent pollutant's adsorption mechanisms. Furthermore, adding chitosan to photocatalysts increases the mass transfer while decreasing both the band gap energy and the amount of intermediates produced during photocatalytic processes, improving the overall photocatalytic efficiency. Herein, we have reviewed the current design and preparation of chitosan and its composites, as well as their applications for the removal of various pollutants by adsorption and photocatalysis processes. Effects of operating variables such as the pH, catalyst mass, contact time, light wavelength, initial pollutant's concentration, and catalyst recyclability, are discussed. Various kinetic and isotherm models are presented to elucidate the rates, and mechanisms of pollutant's removal, onto chitosan-based composites, and several case studies are presented. Additionally, the antibacterial activity of chitosan-based composites has been discussed. This review aims to provide a comprehensive and up-to-date overview of the applications of chitosan-based composites in wastewater treatment and put forward new insights for the development of highly effective chitosan-based adsorbents and photocatalysts. Finally, the main challenges and future directions in the field are discussed.

Synthesis of cuttlebone/ carbon quantum dots/nickel oxide nanocomposite for visible light photodegradation of malachite green used for environmental remediation

In recent years, the development of light-driven nanophotocatalysts has focused on efficiently eliminating organic pollutants. In this regard, the present work focuses on the photocatalytic removal of malachite green (MG) dye using cuttlebone powder (CB) modified with carbon quantum dots (CQDs)/nickel oxide (NiO) under visible light irradiation. Various techniques were used to characterize the proposed composite, including X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) images. The optical properties of the synthesized CB/CQDs/NiO were analyzed by UV-VIS visible spectroscopy. Using central composite design (CCD), several effective parameters, including pH, dye concentration, amount of photocatalyst, and temperature degradation efficiency, were optimized to achieve the optimal condition for photocatalytic activity of CB/CQDs/NiO. The Langmuir-Hinshelwood model was employed to model the kinetics of the degradation of the dye, the resulting K being 0.378 min^-1. The as synthesized nanocomposites could be efficiently removed from water by applying an external magnetic field. The test results indicate that the prepared CB/CQDs/NiO nanocomposite demonstrates excellent stability after four reaction cycles. Furthermore, the nanocomposite shows excellent photocatalytic activity, reducing 99.7% MGdye concentration within 12 min of visible light exposure.

Nanoplexes of ZnS quantum dot-poly-l-lysine/iron oxide nanoparticle-carboxymethylcellulose for photocatalytic degradation of dyes and antibacterial activity in wastewater treatment

The contamination and pollution of wastewater with a wide diversity of chemical, microbiological, and hazardous substances is a field of raising environmental concern. In this study, we developed, for the first time, new hybrid multifunctional nanoplexes composed of ZnS semiconductor quantum dots (ZnS QDs) chemically biofunctionalized with epsilon-poly-l-lysine (ɛPL) and coupled with magnetic iron oxide nanoparticles (MION, Fe₃O₄) stabilized by carboxymethylcellulose (CMC) for the photodegradation (ZnS) of organic molecules and antibacterial activity (ɛPL) with a potential of recovery by an external magnetic field (Fe₃O₄). These nanosystems, which were synthesized entirely through a green aqueous process, were comprehensively characterized regarding their physicochemical properties combined with spectroscopic and morphological features. The results demonstrated that supramolecular colloidal nanoplexes were formed owing to the strong cationic/anionic electrostatic interactions between the biomacromolecule capping ligands of the two nanoconjugates (i.e., polypeptide in ZnS@ɛPL and polysaccharide in Fe₃O₄@CMC). Moreover, these nanosystems showed photocatalytic degradation of methylene blue (MB) used as a model dye pollutant in water. Besides MB, methyl orange, congo red, and rhodamine dyes were also tested for selectivity investigation of the photodegradation by the nanoplexes. The antibacterial activity ascribed to the ɛPL biomolecule was confirmed against Gram-positive and Gram-negative bacteria, including drug-resistance field strains. Hence, it is envisioned that these novel green nanoplexes offer a new avenue of alternatives to be employed for reducing organic pollutants and inactivating pathogenic bacteria in water and wastewater treatment, benefiting from easy magnetic recovery.

Oxidized dextran-crosslinked ferrocene-chitosan-PEI composite porous material integrating adsorption and degradation to malachite green

Treating wastewater containing malachite green (MG) using porous materials with both adsorption and degradation functions have become a major challenge in achieving the carbon neutrality goal. Herein by incorporating the ferrocene (Fc) group as a Fenton active center, a novel composite porous material (DFc-CS-PEI) was prepared using chitosan (CS) and polyethyleneimine (PEI) as skeletons and oxidized dextran as a crosslinker. DFc-CS-PEI not only possesses satisfactory adsorption performance to MG but also excellent degradability in the presence of a minor amount of H₂O₂ (3.5 mmol/L) without any additional assistance, due to high specific surface area and active Fc group. The maximum adsorption capacity is ca. 177.73 ± 3.11 mg/g, outperforming most CS-based adsorbents. The removal efficiency of MG is significantly enhanced from 20 % to 90 % as DFc-CS-PEI and H₂O₂ coexist, due to ^·OH-dominated Fenton reaction, and remained in a wide pH range (2.0-7.0). Cl^- exhibits notable suppression on the degradation of MG because of quenching effects. Note that DFc-CS-PEI has a very small iron leaching (0.2 ± 0.015 mg/L), and can be rapidly recycled by simple water-washing, without any harmful chemicals and potential second pollution. Such versatility, high stability, and green recyclability make the as-prepared DFc-CS-PEI a promising porous material for the treatment of organic wastewater.

An overview of nanomaterial-based novel disinfection technologies for harmful microorganisms: Mechanism, synthesis, devices and application

Harmful microorganism (e.g., new coronavirus) based infection is the most important security concern in life sciences and healthcare. This article aims to provide a state-of-the-art review on the development of advanced technology based on nanomaterial disinfection/sterilization techniques (NDST) for the first time including the nanomaterial types, disinfection techniques, bactericidal devices, sterilization products, and application scenarios (i.e., water, air, medical healthcare), with particular brief account of bactericidal behaviors referring to varied systems. In this emerging research area spanning the years from 1998 to 2021, total of ~200 publications selected for the type of review paper and research articles were reviewed. Four typical functional materials (namely type of metal/metal oxides, S-based, C-based, and N-based) with their development progresses in disinfection/sterilization are summarized with a list of synthesis and design. Among them, the widely used silver nanoparticles (AgNPs) are considered as the most effective bacterial agents in the type of nanomaterials at present and has been reported for inactivation of viruses, fungi, protozoa. Some methodologies against (1) disinfection by-products (DBPs) in traditional sterilization, (2) noble metal nanoparticles (NPs) agglomeration and release, (3) toxic metal leaching, (4) solar spectral response broadening, and (5) photogenerated e^-/h⁺ pairs recombination are reviewed and discussed in this field, namely (1) alternative techniques and nanomaterials, (2) supporter anchoring effect, (3) nonmetal functional nanomaterials, (4) element doping, and (5) heterojunction constructing. The feasible strategies in the perspective of NDST are proposed to involve (1) non-noble metal disinfectors, (2) multi-functional nanomaterials, (3) multi-component nanocomposite innovation, and (4) hybrid techniques for disinfection/sterilization system. It is promising to achieve 100% bactericidal efficiency for 10⁸ CFU/mL within a short time of less than 30 min.

Biodegradable Nonwoven Materials with Antipathogenic Layer

Biopolymer composites have received increasing attention for their beneficial properties such as being biodegradable and having less influence to the environment. Biodegradability of materials has become a desired feature due to the growing problems connected with waste management. The aim of the paper is to emphasize the importance of biodegradable textile materials, especially nonwoven materials with an anti-pathogenic layer. The article refers to the definitions of biodegradation, degradation and composting processes, as well as presenting methods of testing biodegradability depending on the type of material. The study gives examples of biodegradation of textiles and presents examples of qualitative and quantitative methods used for testing antimicrobial activity of biodegradable nonwovens with an anti-pathogenic layer.

Efficient purification of wastewater by applying mechanical force and BaCO3/TiO2 and BaTiO3/TiO2 piezocatalysts

In typical advanced oxidation catalysis, a semiconductor should have a robust capacity to generate separated electron-hole pairs on a material's surface under irradiation of photons with energy more than the material's bandgap. However, rapid charge carrier recombination and low photon to current yield of semiconductor photocatalysts and low percentages of UV light in sunlight leads to a low level of photocatalytic efficiency for practical application. Mechanical energy is a natural energy that can be considered as a form of rich, clean and renewable energy which can be harvested by using piezoelectric materials. Here, we developed BaCO₃/TiO₂ and BaTiO₃/TiO₂ composites as mechanical harvesting materials to decontaminate pollutants. Results showed that BaCO₃ has a great effect on the piezocatalytic activity of products. The control sample (sample without Ba) only degraded 11.2% of Acid Red 151 (AR151) , while the sample containing Ba degraded 96.7% of AR151. Besides, the effects of several parameters, including the natural surfactant, reaction time and temperature, calcination, and ultrasonic power and pulse on the catalytic activity of the as-prepared piezocatalysts were studied. Results showed that it is possible to degrade 99.1% of AR151 by controlling ultrasonic parameters during 2 h of mechanical energy force.

Facile synthesis and characterization of chitosan/zinc oxide nanocomposite for enhanced antibacterial and photocatalytic activity

In this report, chitosan/zinc oxide (CS/ZnO) nanocomposite was synthesized using Sida acuta and assessed their antibacterial and photocatalytic properties. The formation of CS/ZnO nanocomposite was preliminary confirmed by colour change and UV-visible spectroscopy. The crystalline peaks related to CS and ZnO in CS/ZnO nanocomposite were demonstrated by XRD. Morphological analysis through FE-SEM and TEM showed a rod like appearance for ZnO NPs and agglomerated grains with rod shaped morphology was observed for the CS/ZnO nanocomposite. The peaks around 400-800 cm^-1 in the IR spectrum of nanocomposite indicated the vibrations of metal-oxygen (ZnO), whereas bands at 1659 cm^-1 and 1546 cm^-1 indicated the presence of amine groups, which confirms the CS in the synthesized CS/ZnO nanocomposite. The CS/ZnO nanocomposite exhibited remarkable growth inhibition activity against B. subtilis and E. coli with 22 ± 0.3 and 16.5 ± 0.5 mm zone of inhibitions. In addition, CS/ZnO nanocomposite treated cotton fabrics also exhibited antibacterial activity against B. subtilis and E. coli. Furthermore, the ZnO NPs and nanocomposite showed time depended photodegradation activity and revealed 76% and 91% decomposition of CR under sunlight irradiation. In conclusion, our study revealed that the functionalization of biopolymer CS to the inorganic ZnO enhances the bio and catalytic properties.

Facile Synthesis of ZnO Nanoparticles for the Photodegradation of Rhodamine-B

River pollution is a problem that is still very poorly handled. Industrial growth is the most significant contributor to produce this wastewater. The industry produces liquid waste such as dyes that do not meet handling standards because of the high cost. Photocatalyst is way better than other methods such as adsorption, coagulation, fluctuation, and others. However, there are still many shortcomings of the existing methods, such as high cost, high temperature, and dangerous by-products. This research seeks to provide a solution by synthesizing zinc oxide (ZnO) nanoparticles as a photocatalyst to reduce rhodamine B dye under visible light irradiation. ZnO nanoparticles were successfully synthesized through a simple sol-gel method in the form of a white powder by heating at a low temperature, 60°C. The XRD results show that the results have a diffraction peak that follows the standard ZnO with a hexagonal wurtzite crystal structure. According to the Scherrer equation, the crystal has a size of 22.61 nm. SEM analysis showed that the particle morphology and particle size were homogeneous with a spherical shape, ranging from 22-24 nm. Optimal ZnO photocatalytic activity at 90 minutes with an efficiency of 98.83%.

Carbon Dots as an Emergent Class of Antimicrobial Agents

Antimicrobial resistance is a recognized global challenge. Tools for bacterial detection can combat antimicrobial resistance by facilitating evidence-based antibiotic prescribing, thus avoiding their overprescription, which contributes to the spread of resistance. Unfortunately, traditional culture-based identification methods take at least a day, while emerging alternatives are limited by high cost and a requirement for skilled operators. Moreover, photodynamic inactivation of bacteria promoted by photosensitisers could be considered as one of the most promising strategies in the fight against multidrug resistance pathogens. In this context, carbon dots (CDs) have been identified as a promising class of photosensitiser nanomaterials for the specific detection and inactivation of different bacterial species. CDs possess exceptional and tuneable chemical and photoelectric properties that make them excellent candidates for antibacterial theranostic applications, such as great chemical stability, high water solubility, low toxicity and excellent biocompatibility. In this review, we will summarize the most recent advances on the use of CDs as antimicrobial agents, including the most commonly used methodologies for CD and CD/composites syntheses and their antibacterial properties in both in vitro and in vivo models developed in the last 3 years.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Recent progress in transition metal oxide/sulfide quantum dots-based nanocomposites for the removal of toxic organic pollutants

Water is an essential solvent that is extremely necessary for the survival of life. Water pollution due to the increased utilization of water for various processes, including domestic and industrial activities, poses a special threat that contaminates both surface and ground water. In recent years, advanced oxidation processes (AOPs) have been applied to deal with wastewater problems, which is a green method used to oxidize organic contaminants with strong oxidative radical species. Among the AOPs, photocatalytic technology is one of the most promising strategies for wastewater cleaning, which fulfills the aims of environmentally friendly and sustainable development. Owing to their unique electronic, optical, and structural properties, nanoscale semiconductors have received substantial interest as materials for AOPs, particularly inspired by their superb quantum confinement effects and large surface-area-to-volume ratio, which are essential for catalytic reaction kinetics. Recent advancements have revealed that semiconductor nanocrystals, known as quantum dots (QDs), are newly emerging zero-dimensional (0-D) nanomaterials, which have garnered much attention owing to their special physiochemical characteristics such as high conductivity, thermo-chemical and opto-mechanical stability, high adsorption coefficients, and, most importantly, their admirable recyclability. In this review, we provide a clear understanding of the importance of semiconductor QD-based nanocomposites in the degradation of organic pollutants, in addition to the mechanism involved in the reaction process. Following this, the enhancement of different materials, such as metal oxides and metal sulfide QD-based nanocomposites, is discussed in the context of combating environmental pollution.

Photocatalytic graphitic carbon nitride-chitosan composites for pathogenic biofilm control under visible light irradiation

Photocatalysis holds promise for inactivating environmental pathogens. Visible-light-responsive composites of carbon-doped graphitic carbon nitride and chitosan with high reactivity and processability were fabricated, and they can control pathogenic biofilms for environmental, food, biomedical, and building applications. The broad-spectrum biofilm inhibition and eradication of the photocatalytic composites against Staphylococcus epidermidis, Pseudomonas aeruginosa PAO1, and Escherichia coli O157: H7 under visible light irradiation were demonstrated. Extracellular polymeric substances in Escherichia coli O157: H7 biofilms were most resistant to photocatalytic oxidation, which led to reduced performance for biofilm removal. ¹O₂ produced by the composites was believed to dominate biofilm inactivation. Moreover, the composites exhibited excellent performance for inhibiting biofilm development in urine, highlighting the promise for inactivating environmental biofilms developed from multiple bacterial species. Our study provides fundamental insights into the development of new photocatalytic composites, and elucidates the mechanism of how the photocatalyst reacts with a microbiological system.

The cytotoxicity of core-shell or non-shell structure quantum dots and reflection on environmental friendly: A review

Quantum dots are widely applicated into bioindustry and research owing to its superior properties such as broad excitation spectra, narrow bandwidth emission spectra and high resistance to photo-bleaching. However, the toxicity of quantum dots should not be underestimated and aroused widespread concern. The surface properties and size of quantum dots are critical relevant properties on toxicity. Then, the core/shell structure becomes one common way to affect the activity of quantum dots such as enhance biocompatibility and stability. Except those toxicity it induced, the problem it brought into the environment such as the degradation of quantum dot similarly becomes a hot issue. This review initially took a brief scan of current research on the cytotoxicity of QDs and the mechanism behind that over the past five years. Mainly discussion concentrated on the diversity of structure on quantum dots whether played a key role on the cytotoxicty of quantum dots. It also discussed the role of different shells with metal or nonmetal cores and the influence on the environment.

Terephthalaldehyde as a good crosslinking agent in crosslinked chitosan hydrogel for the selective removal of anionic dyes

This work reports the selectivity and good adsorption performance for the removal of anionic dyes using an ultrasonic-synthesized terephthalaldehyde crosslinked chitosan hydrogel.

A simple strategy for selective photocatalysis degradation of organic dyes through selective adsorption enrichment by using a complex film of CdS and carboxylmethyl starch

Resource utilization of wastes through effective separation is a major challenge in the field of water and wastewater treatment. Photocatalytic degradation is a powerful water treatment technology but has no selectivity in degradation of various coexisting contaminants due to its strong oxidation. In this work, a complex film composed of CdS and carboxylmethyl starch (CdS/CMS) was designed and fabricated using in situ formation method. The morphology, composition, and optical property of this film were investigated in detail by various characterization methods. CdS was well distributed in the starch matrix, and the absorption wavelength of this film was still located in the visible light region. This starch-based complex film was used to remove various organic dyes [methylene blue (MB), crystal violet (CV), and rhodamine B (RhB)] from aqueous solutions by two consecutive processes of adsorption enrichment and photocatalysis degradation. 0.1 g of CdS/CMS film can remove approximately 86.72% of MB and 81.03% of CV in 120 min. CdS/CMS still exhibited evidently selective photocatalysis degradation of MB and CV in MB/RhB and CV/RhB binary systems, respectively, and had nearly no effect on RhB. The cationic groups on MB and CV can effectively interact with negatively carboxyl groups of CMS via electrostatic interactions, causing their good affinities; but the anionic groups on RhB had an electrostatic repulsion to the starch matrix. The considerably different affinities of various dyes to CMS triggered strong adsorption preferences and great selective degradation effectiveness. The selectivity of CdS/CMS could not be influenced by pH and some coexisting inorganic anions. Furthermore, this complex film did not require regeneration and could be reused directly with low removal capacity loss. Therefore, a new and simple strategy was provided to realize the effective separation and recovery of target contaminants in water by photocatalytic degradation technology.

Microwave Solvothermal Synthesis of Three-Dimensional Bi2MoO6 Microspheres with Enhanced Photocatalytic Activity

In this study, three-dimensional (3D) Bi₂MoO₆ microspheres were successfully fabricated by a facile, rapid, and mild microwave solvothermal strategy for the first time. The resultant 3D Bi₂MoO₆ microspheres exhibited superior adsorption capacity and photocatalytic efficiency in the degradation of the representative antibiotic ciprofloxacin under visible light, for which the reaction kinetic rate constant is 7.5 times as high as that of the as-synthesized zero-dimensional Bi₂MoO₆ nanoparticles. The 3D hierarchical porous structure and the high Brunauer-Emmett-Teller surface area providing abundant reactive sites mainly contributed to the enhanced photocatalytic activity. The results highlight the feasibility of 3D Bi₂MoO₆ microspheres as an efficient visible-light-responsive photocatalyst for antibiotic removal in an aqueous system.

Visible-light driven degradation of tetracycline hydrochloride and 2,4-dichlorophenol by film-like N-carbon@N-ZnO catalyst with three-dimensional interconnected nanofibrous structure

The emergence of more and more persistent organic molecules as contaminants in water simulates research towards the development of more advanced technologies, among which photocatalysis is a feasible choice. However, it is still challenging to design a photocatalyst that fulfills all the requirements for industrial application, i.e., active under visible-light irradiation, shape with handy convenience, highly uniform distribution of active sites, substrate with excellent electronic properties, etc. In this study, we report an attempt to solve these issues at once by designing a film-like photocatalyst with uniform distribution of nitrogen-doped ZnO nanoparticles along nitrogen-doped carbon ultrafine nanofibers with three-dimensional interconnected structure. Under visible-light irradiation, the product exhibited remarkable reactivity for the degradation of two model pollutants tetracycline hydrochloride and 2,4-dichlorophenol within 100 min. The cyclic experiments demonstrated only a slight loss (ca. 5 %) of reactivity after five consecutive photocatalytic reactions. We also investigated the detailed relationship between the structural features and the superior properties of this product, as well as the degradation mechanisms. The convenient shape of the product with excellent performances for the treatment of real polluted water increases its suitability for larger scale application. Our work provides a rational design of photocatalysts for environmental remediation.

Performance optimization of CdS precipitated graphene oxide/polyacrylic acid composite for efficient photodegradation of chlortetracycline

Here a CdS embedded poly acrylic acid (PAA)/graphene oxide (GO) polymeric composite was prepared for the efficient degradation of chlortetracycline (CTC) driven by visible light irradiation. The structure-activity relationship of GO/PAA-CdS was confirmed through the photocatalytic evaluation of a series of samples prepared by varying GO concentration, molar ratio of Cd:S and the amount of crosslinking agent. Through the composition, morphology, photoelectrochemical characterizations and degradation kinetic studies, it could be confirmed that the enhanced photocatalytic activity is attributed to the controlled growth of CdS nanoparticles by polymer net structure and effective electron transfer along GO nanosheets. The photodegradation of CTC was confirmed to be mainly governed by O₂^- and OH radicals generated from GO/PAA-CdS. The degradation intermediates of CTC were confirmed by LC-MS, and possible degradation pathways were proposed based on the prediction of radical attacking sites according to Fukui function values obtained through Density Functional Theory (DFT). Moreover, it was found that the catalytic activity of the photocatalyst was maintained after several cycles confirming the enhanced anti-photocorrosion of GO/PAA-CdS. This research provided an efficient approach by a novel photocatalyst for the removal of CTC from wastewater.

Synthesis and photocatalytic degradation activities of phosphorus containing ZnO microparticles under visible light irradiation for water treatment applications

A series of phosphorus containing ZnO (P-ZnO) photocatalysts with various percentages of phosphorus were successfully synthesized using the hydrothermal method. The structural, physical and optical properties of the obtained microparticles were investigated using diverse techniques such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible diffusion reflectance spectroscopy (UV-Vis DRS), photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and N₂ adsorption-desorption analysis. The photocatalytic activities of the pure and P-ZnO samples were evaluated for the degradation of Rhodamine B (RhB) under visible light irradiation. The parameters such as pH, catalyst dosage, contaminant concentration and effect of persulfate as an oxidant were studied. It was found that the P-ZnO1.8% photocatalyst could destroy 99% of RhB (5 ppm) in 180 min at pH = 7; furthermore, it degraded ∼100% of 5 and 10 ppm of the RhB pollutant in 120 and 180 min, respectively, only by adding 0.01 g of persulfate into the reaction solution. To determine the photocatalytic mechanism, 2-propanol, benzoquinone and EDTA were used and it was indicated that hydroxyl radicals, superoxide ions and holes, all had major roles in the photocatalytic degradation but the hydroxyl radical effect was the most significant. The phenol degradation was also investigated using the P-ZnO1.8% optimum photocatalyst which could destroy 53% of the phenol (5 ppm) in 180 min. According to the reusability test, it was proved that after 5 cycles, the catalyst activity was not highly changed and it was potentially capable of pollutant degradation.

Functionalized Gold and Silver Bimetallic Nanoparticles Using Deinococcus radiodurans Protein Extract Mediate Degradation of Toxic Dye Malachite Green

Background

Biodegradation of toxic organic dye using nanomaterial-based microbial biocatalyst is an ecofriendly and promising technique.

Materials and Methods

Here, we have investigated the novel properties of functionalized Au-Ag bimetallic nanoparticles using extremophilic Deinococcus radiodurans proteins (Drp-Au-AgNPs) and their degradation efficiency on the toxic triphenylmethane dye malachite green (MG).

Results and Discussion

The prepared Drp-Au-AgNPs with an average particle size of 149.8 nm were capped by proteins through groups including hydroxyl and amide. Drp-Au-AgNPs demonstrated greater degradation ability (83.68%) of MG than D. radiodurans cells and monometallic AuNPs. The major degradation product was identified as 4-(dimethylamino) benzophenone, which is less toxic than MG. The degradation of MG was mainly attributed to the capping proteins on Drp-Au-AgNPs. The bimetallic NPs could be reused and maintained MG degradation ability (>64%) after 2 cycles.

Conclusion

These results suggest that the easily prepared Drp-Au-AgNPs have potential applications as novel nanomedicine for MG detoxification, and nanomaterial for biotreatment of a toxic polyphenyl dye-containing wastewater.

Bridging and synergistic effect of the pyrochlore like Bi2Zr2O7 structure with robust CdCuS solid solution for durable photocatalytic removal of the organic pollutants

Herein, a strong redox ability photocatalyst of CdCuS solid solution composited with pyrochlore like Bi₂Zr₂O₇ has been fabricated by the simple hydrothermal method. The robust CdCuS solid solution materials perform the supporting role to the Bi₂Zr₂O₇ nano materials. The structural, optical, valence and vibrational states of the prepared heterostructure materials were analyzed using various characterization techniques. The photocatalytic activity of the as-synthesized Bi₂Zr₂O₇/CdCuS heterostructure has been verified under direct solar light and ambient conditions. The synthesized Bi₂Zr₂O₇/CdCuS nano combination exhibits a better photocatalytic activity for the removal of methylene blue and 4-nitrophenol organic probe molecules. The heterostructure formation between the samples is confirmed by HRTEM analysis. The improved rate of the photocatalytic reaction of the samples is attributed to the formation of heterostructures at the interface. The close interfacial contact between the two materials discloses the effective charge transfer, which leads to suppressed charge carrier recombination. The enhanced photo catalytic activity of redox-mediator-free-Bi₂Zr₂O₇/CdCuS heterostructure, possibly will be credited to the robust redox ability and the several charge transfer channels in the tight contact. The chief radicals produced in the catalytic reduction reaction have been predicted by the scavenger trapping methods and the results are discussed in detail. The obtained information from this study on Bi₂Zr₂O₇/CdCuS delivers some new visions for the design of active photocatalysts with multiple benefits.

Photocatalytic degradation mechanism for CdCuS solid solution supported pyrochlore like Bi₂Zr₂O₇.

Cytotoxicity, Antioxidant, Antibacterial, and Photocatalytic Activities of ZnO-CdS Powders

In this work, ZnO–CdS composite powders synthesized by a simple chemical precipitation method were thoroughly characterized. The morphological, structural, compositional, photocatalytical, and biological properties of the prepared composites were investigated in comparison with those of the pristine components and correlated with the CdS concentration. ZnO–CdS composites contain flower-like structures, their size being tuned by the CdS amount added during the chemical synthesis. The photocatalytic activity of the composites was analyzed under UV irradiation using powders impregnated with methylene blue; the tests confirming that the presence of CdS along the ZnO in composites can improve the dye discoloration. The biological properties such as antioxidant capacity, antibacterial activity, and cytotoxicity of the ZnO, CdS, and ZnO–CdS composites were evaluated. Thus, the obtained composites presented medium antioxidant effect, biocidal activity against Escherichia coli, and no toxicity (at concentrations less than 0.05 mg/mL for composites with a low CdS amount) for human fibroblast cells. Based on these results, such composites can be used as photocatalytic and/or biocidal additives for photoactive coatings, paints, or epoxy floors, which in their turn can provide a cleaner and healthier environment.

Antimicrobial Activity and Mechanism of Functionalized Quantum Dots

An essential characteristic of quantum dots (QDs) is their antimicrobial activity. Compared with conventional antibiotics, QDs not only possess photoluminescence properties for imaging and photodynamic therapy but also have high structural stability. To enhance their antimicrobial efficiency, QDs usually are functionalized by polymers, including poly(ethylene glycol), polyethyleneimine, and poly-l-lysine. Also, QDs conjugated with polymers, such as poly(vinylpyrrolidone) and polyvinylidene fluoride, are prepared as antimicrobial membranes. The main antimicrobial mechanisms of QDs are associated with inducing free radicals, disrupting cell walls/membranes, and arresting gene expression. The different mechanisms from traditional antibiotics allow QDs to play antimicrobial roles in multi-drug-resistant bacteria and fungi. Since the toxicity of the QDs on animal cells is relatively low, they have broad application in antimicrobial research as an effective alternative of traditional antibiotics.

Research progress of photocatalytic sterilization over semiconductors

With increasingly serious environmental issues, practical applications of semiconductor photocatalysts for environmental purification have attracted broad attention. Semiconductor photocatalysts for the disinfection of soil surfaces, air and water are of great interest.