1
|
Guembe-García M, Utzeri G, Valente AJM, Ibeas S, Trigo-López M, García JM, Vallejos S. Efficient extraction of textile dyes using reusable acrylic-based smart polymers. JOURNAL OF HAZARDOUS MATERIALS 2024; 476:135006. [PMID: 38941828 DOI: 10.1016/j.jhazmat.2024.135006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/22/2024] [Revised: 06/20/2024] [Accepted: 06/21/2024] [Indexed: 06/30/2024]
Abstract
Water pollution from industrial or household waste, containing dyes from the textile industry, poses a significant environmental challenge requiring immediate attention. In this study, we have developed a crosslinked-smart-polymer film based on 2-(dimethylamino)ethyl methacrylate copolymerized with other hydrophilic and hydrophobic commercial monomers, and its efficacy in removing 21 different textile dyes was assessed. The smart polymer effectively interacts with and adsorbs dyes, inducing a noticeable colour change. UV-Vis spectroscopy analysis confirmed a removal efficiency exceeding 90 % for anionic dyes, with external diffusion identified as the primary influencing factor on process kinetics, consistent with both pseudo-first-order kinetics and the Crank-Dual model. Isothermal studies revealed distinct adsorption behaviors, with indigo carmine adhering to a Freundlich isotherm while others conformed to the Langmuir model. Permeation and fluorescence analyses corroborated isotherm observations, verifying surface adsorption. Significantly, our proof-of-concept demonstrated the resilience of the smart-film to common fabric softeners and detergents without compromising adsorption capacity. Additionally, the material exhibited reusability (for at least 5 cycles), durability, and good thermal and mechanical properties, with T5 and T10 values of 265 °C and 342 °C, respectively, a Tg of 168 °C, and a water swelling percentage of 54.3 %, thus confirming its stability and suitability for industrial application. ENVIRONMENTAL IMPLICATION: Dyes released during laundry processes should be classified as "hazardous materials" owing to their significant toxicity towards aquatic organisms, with the potential to disrupt ecosystems and harm aquatic biodiversity. This paper discusses the development of a novel acrylic material in film form, engineered to extract toxic anionic dyes. This study directly contributes to mitigating the environmental impact associated with the fashion industry and the domestic use of textiles. It can be implemented on both an industrial and personal scale, thereby encouraging more sustainable practices and promoting collaborative citizen science efforts towards.
Collapse
Affiliation(s)
- Marta Guembe-García
- Departamento de Química, Facultad de Ciencias, Universidad de Burgos, Plaza Misael Bañuelos s/n, 09001 Burgos, Spain
| | - Gianluca Utzeri
- CQC-IMS, Department of Chemistry, University of Coimbra, 3004-535 Coimbra, Portugal
| | - Artur J M Valente
- CQC-IMS, Department of Chemistry, University of Coimbra, 3004-535 Coimbra, Portugal
| | - Saturnino Ibeas
- Departamento de Química, Facultad de Ciencias, Universidad de Burgos, Plaza Misael Bañuelos s/n, 09001 Burgos, Spain
| | - Miriam Trigo-López
- Departamento de Química, Facultad de Ciencias, Universidad de Burgos, Plaza Misael Bañuelos s/n, 09001 Burgos, Spain
| | - Jose Miguel García
- Departamento de Química, Facultad de Ciencias, Universidad de Burgos, Plaza Misael Bañuelos s/n, 09001 Burgos, Spain
| | - Saul Vallejos
- Departamento de Química, Facultad de Ciencias, Universidad de Burgos, Plaza Misael Bañuelos s/n, 09001 Burgos, Spain.
| |
Collapse
|
2
|
Wang J, Abbas SC, Li L, Walker CC, Ni Y, Cai Z. Cellulose Membranes: Synthesis and Applications for Water and Gas Separation and Purification. MEMBRANES 2024; 14:148. [PMID: 39057656 PMCID: PMC11279174 DOI: 10.3390/membranes14070148] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2024] [Revised: 06/21/2024] [Accepted: 06/24/2024] [Indexed: 07/28/2024]
Abstract
Membranes are a selective barrier that allows certain species (molecules and ions) to pass through while blocking others. Some rely on size exclusion, where larger molecules get stuck while smaller ones permeate through. Others use differences in charge or polarity to attract and repel specific species. Membranes can purify air and water by allowing only air and water molecules to pass through, while preventing contaminants such as microorganisms and particles, or to separate a target gas or vapor, such as H2 and CO2, from other gases. The higher the flux and selectivity, the better a material is for membranes. The desirable performance can be tuned through material type (polymers, ceramics, and biobased materials), microstructure (porosity and tortuosity), and surface chemistry. Most membranes are made from plastic from petroleum-based resources, contributing to global climate change and plastic pollution. Cellulose can be an alternative sustainable resource for making renewable membranes. Cellulose exists in plant cell walls as natural fibers, which can be broken down into smaller components such as cellulose fibrils, nanofibrils, nanocrystals, and cellulose macromolecules through mechanical and chemical processing. Membranes made from reassembling these particles and molecules have variable pore architecture, porosity, and separation properties and, therefore, have a wide range of applications in nano-, micro-, and ultrafiltration and forward osmosis. Despite their advantages, cellulose membranes face some challenges. Improving the selectivity of membranes for specific molecules often comes at the expense of permeability. The stability of cellulose membranes in harsh environments or under continuous operation needs further improvement. Research is ongoing to address these challenges and develop advanced cellulose membranes with enhanced performance. This article reviews the microstructures, fabrication methods, and potential applications of cellulose membranes, providing some critical insights into processing-structure-property relationships for current state-of-the-art cellulosic membranes that could be used to improve their performance.
Collapse
Affiliation(s)
- Jinwu Wang
- Forest Products Laboratory, U.S. Forest Service, 1 Gifford Pinchot Drive, Madison, WI 53726, USA
| | - Syed Comail Abbas
- Department of Chemical and Biological Engineering, University of Maine, 5737 Jenness Hall, Orono, ME 04469, USA
| | - Ling Li
- School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA
| | - Colleen C. Walker
- Process Development Center, University of Maine, 5737 Jenness Hall, Orono, ME 04469, USA
| | - Yonghao Ni
- Department of Chemical and Biological Engineering, University of Maine, 5737 Jenness Hall, Orono, ME 04469, USA
| | - Zhiyong Cai
- Forest Products Laboratory, U.S. Forest Service, 1 Gifford Pinchot Drive, Madison, WI 53726, USA
| |
Collapse
|
3
|
Zubair M, Yasir M, Ponnamma D, Mazhar H, Sedlarik V, Hawari AH, Al-Harthi MA, Al-Ejji M. Recent advances in nanocellulose-based two-dimensional nanostructured membranes for sustainable water purification: A review. Carbohydr Polym 2024; 329:121775. [PMID: 38286528 DOI: 10.1016/j.carbpol.2024.121775] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2023] [Revised: 12/02/2023] [Accepted: 01/01/2024] [Indexed: 01/31/2024]
Abstract
Nanocellulose (NC), a one-dimensional nanomaterial, is considered a sustainable material for water and wastewater purification because of its promising hydrophilic surface and mechanical characteristics. In this regard, nanostructured membranes comprising NC and two-dimensional (2D) nanomaterials emerged as advanced membranes for efficient and sustainable water purification. This article critically reviews the recent progress on NC-2D nanostructured membranes for water and wastewater treatment. The review highlights the main techniques employed to fabricate NC-2D nanostructured membranes. The physicochemical properties, including hydrophilicity, percent porosity, surface roughness, structure, and mechanical and thermal stability, are summarized. The key performance indicators such as permeability, rejection, long operation stability, antifouling, and interaction mechanisms are thoroughly discussed to evaluate the role of NC and 2D nanomaterials. Finally, summary points and future development work are highlighted to overcome the challenges for potential practical applications. This review contributes to the design and development of advanced membranes to solve growing water pollution concerns in a sustainable manner.
Collapse
Affiliation(s)
- Mukarram Zubair
- Department of Environmental Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam 31451, Saudi Arabia.
| | - Muhammad Yasir
- Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Třída Tomáše Bati 5678, 76001 Zlín, Czech Republic
| | - Deepalekshmi Ponnamma
- Materials Science and Technology Program, College of Arts and Sciences, Qatar University, P.O. Box 2713, Doha, Qatar
| | - Hassam Mazhar
- Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
| | - Vladimir Sedlarik
- Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Třída Tomáše Bati 5678, 76001 Zlín, Czech Republic
| | - Alaa H Hawari
- Department of Civil and Architectural Engineering, College of Engineering, Qatar University, P.O. Box 2713, Doha, Qatar
| | - Mamdouh Ahmed Al-Harthi
- Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia; Interdisciplinary Research Center for Refining & Advanced Chemicals, King Fahd University of Petroleum & Minerals, 31261, Dhahran, Saudi Arabia
| | - Maryam Al-Ejji
- Center for Advanced Materials, Qatar University, P.O. Box 2713, Doha, Qatar.
| |
Collapse
|
4
|
Norfarhana A, Ilyas R, Ngadi N, Dzarfan Othman MH. Innovative ionic liquid pretreatment followed by wet disk milling treatment provides enhanced properties of sugar palm nano-fibrillated cellulose. Heliyon 2024; 10:e27715. [PMID: 38509963 PMCID: PMC10951586 DOI: 10.1016/j.heliyon.2024.e27715] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2023] [Revised: 03/05/2024] [Accepted: 03/05/2024] [Indexed: 03/22/2024] Open
Abstract
In order to accommodate the increased demand for innovative materials, intensive research has focused on natural resources. In pursuit of advanced substances that exhibit functionality, sustainability, recyclability, and cost-effectiveness, the present work attempted an alternative study on cellulose nanofibers derived from sugar palm fiber. Leveraging an innovative approach involving ionic liquid (IL) pre-treatment, bleaching, and wet disc mill technique, nano-fibrillated cellulose (NFC) was successfully obtained from the sugar palm fiber source. Remarkably, 96.89% of nanofibers were extracted from the sugar palm fiber, demonstrating the process's efficacy and scalability. Further investigation revealed that the sugar palm nano-fibrillated cellulose (SPNFC) exhibited a surface area of 3.46 m2/g, indicating a significant interface for enhanced functionality. Additionally, the analysis unveiled an average pore size of 4.47 nm, affirming its suitability for various applications that necessitate precise filtration. Moreover, the surface charge densities of SPNFC were found to be -32.1 mV, offering opportunities for surface modification and enhanced interactions with various materials. The SPNFC exhibit remarkable thermal stability, enduring temperatures of up to 360.5 °C. Additionally, the isolation process is evident in a significant rise in the crystallinity index, escalating from 50.97% in raw fibers to 61.62% in SPNFC. These findings shed light on the vast potential and distinct features of SPNFC, opening the path for its application in a wide array of industries, including but not limited to advanced materials, biomedicine, and environmental engineering.
Collapse
Affiliation(s)
- A.S. Norfarhana
- Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
- Department of Petrochemical Engineering, Politeknik Tun Syed Nasir Syed Ismail, Pagoh Education Hub, 84600 Pagoh Muar Johor, Malaysia
| | - R.A. Ilyas
- Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
- Centre for Advanced Composite Materials (CACM), Universiti Teknologi Malaysia (UTM), Johor Bahru 81310, Johor, Malaysia
- Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia
- Centre of Excellence for Biomass Utilization, Universiti Malaysia Perlis, 02600, Arau, Perlis, Malaysia
| | - Norzita Ngadi
- Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
| | - Mohd Hafiz Dzarfan Othman
- Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
- Advanced Membrane Technology Research Centre (AMTEC), Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
| |
Collapse
|
5
|
Al-Gethami W, Qamar MA, Shariq M, Alaghaz ANMA, Farhan A, Areshi AA, Alnasir MH. Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review. RSC Adv 2024; 14:2804-2834. [PMID: 38234871 PMCID: PMC10792434 DOI: 10.1039/d3ra06501d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/23/2023] [Accepted: 12/19/2023] [Indexed: 01/19/2024] Open
Abstract
Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.
Collapse
Affiliation(s)
- Wafa Al-Gethami
- Chemistry Department, Faculty of Science, Taif University Al-Hawiah, PO Box 11099 Taif City Saudi Arabia
| | - Muhammad Azam Qamar
- Department of Chemistry, School of Science, University of Management and Technology Lahore 54770 Pakistan
| | - Mohammad Shariq
- Department of Physics, College of Science, Jazan University Jazan 45142 Saudi Arabia
| | | | - Ahmad Farhan
- Department of Chemistry, University of Agriculture Faisalabad Faisalabad 38040 Pakistan
| | - Ashwaq A Areshi
- Samtah General Hospital, Ministry of Health Jazan 86735 Saudi Arabia
| | - M Hisham Alnasir
- Department of Physics, RIPHAH International University Islamabad 44000 Pakistan
| |
Collapse
|
6
|
Yang H, Zheng H, Duan Y, Xu T, Xie H, Du H, Si C. Nanocellulose-graphene composites: Preparation and applications in flexible electronics. Int J Biol Macromol 2023; 253:126903. [PMID: 37714239 DOI: 10.1016/j.ijbiomac.2023.126903] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2023] [Revised: 08/18/2023] [Accepted: 09/12/2023] [Indexed: 09/17/2023]
Abstract
In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.
Collapse
Affiliation(s)
- Hongbin Yang
- State Key Laboratory of Biobased Fiber Manufacturing Technology, Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China
| | - Hongjun Zheng
- Department of Chemistry, Yale University, New Haven, CT 06520, USA
| | - Yaxin Duan
- State Key Laboratory of Biobased Fiber Manufacturing Technology, Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China
| | - Ting Xu
- State Key Laboratory of Biobased Fiber Manufacturing Technology, Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China.
| | - Hongxiang Xie
- State Key Laboratory of Biobased Fiber Manufacturing Technology, Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China.
| | - Haishun Du
- Department of Chemical Engineering, Auburn University, Auburn, AL 36849, USA.
| | - Chuanling Si
- State Key Laboratory of Biobased Fiber Manufacturing Technology, Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China; National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Nanjing Forestry University, Nanjing 210037, China.
| |
Collapse
|
7
|
Hu X, Song M, Li S, Chu Y, Zhang WX, Deng Z. TEMPO oxidized cellulose nanocrystal (TOCNC) scaffolded nanoscale zero-valent iron (nZVI) for enhanced chromium removal. CHEMOSPHERE 2023; 343:140212. [PMID: 37742762 DOI: 10.1016/j.chemosphere.2023.140212] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/25/2023] [Revised: 09/06/2023] [Accepted: 09/18/2023] [Indexed: 09/26/2023]
Abstract
The conventional carboxymethyl cellulose (CMC) stabilization hampered available active sites of adsorption and reduction, due to irregular shape of nanoscale zero-valent iron (nZVI) particles with augmented average size and passivated surface, leading to insufficient removal and poor resistance against complex environmental conditions. Herein, we presented (2,2,6,6-Tetramethylpiperidine-1-oxyl)-mediated (TEMPO-mediated) oxidation of cellulose nanocrystal (TOCNC) scaffolded nZVI (nZVI@TOCNC) with enhanced efficiency for chromium removal in comparison with CMC stabilized nZVI (nZVI@CMC). The anchoring of nZVI at the functional sites of TOCNC was initiated by liquid-phase chemical reduction method. The nZVI@TOCNC showed improved nZVI distribution with uniform particle size and thinner shell (∼1 nm). Characterizations using FT-IR, XPS and XRD demonstrated that bindings between TOCNC and nZVI were through hydrogen bonds, electrostatic attractions, coordination-covalent bonds and bidentate chelation. TOCNC with shorter branch-chain (-COC-) surrounding the nZVI could potentially form a porous and compact "mesh" to rigidly encapsulate nZVI, while CMC wrapped around nZVI in the way of traditional polymeric stabilizers. Thus, 0.5 g/L nZVI@TOCNC achieved 99.96% Cr (Ⅵ) removal efficiency (20 mg/L) at pH = 7 and the removal capacity were up to 55.86 mg/g. The nZVI@TOCNC consistently presented higher removal efficiency than nZVI@CMC under wide pH range (3-7). Cr (Ⅵ) was reduced to Cr (Ⅲ) by nZVI@TOCNC with deposition of CrxFe1-x (OH)3 and Cr2O3. The predominant mechanisms of removal probably consisted of electrostatic attractions, reduction, co-precipitation and surface complexation. The pseudo-second-order kinetic model well-fitted the sorption kinetic, indicating TOCNC scaffold stabilized nZVI for efficient reduction of Cr (Ⅵ) through multi-layer adsorption. As a template and delivery carrier, TOCNC shows promising potential to further improve the capability and practice of nZVI for in situ treatment of industrial waste water with heavy metal pollution.
Collapse
Affiliation(s)
- Xiaolei Hu
- State Key Laboratory for Pollution Control, School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China
| | - Mingyang Song
- Department of Energy, Environmental & Chemical Engineering, Washington University in St. Louis, St. Louis, Missouri, 63130, United States
| | - Shiyan Li
- State Key Laboratory for Pollution Control, School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China
| | - Yu Chu
- State Key Laboratory for Pollution Control, School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China
| | - Wei-Xian Zhang
- State Key Laboratory for Pollution Control, School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China
| | - Zilong Deng
- State Key Laboratory for Pollution Control, School of Environmental Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China.
| |
Collapse
|
8
|
Kong X, Zare N, Quchan Atigh ZB, Fayazi M, Karimi-Maleh H, Sadeghifar H, Yegya PK. Unveiling the interactions between biomaterials and heterocyclic dyes: A sustainable approach for wastewater treatment. CHEMOSPHERE 2023; 338:139625. [PMID: 37487979 DOI: 10.1016/j.chemosphere.2023.139625] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2023] [Revised: 06/29/2023] [Accepted: 07/21/2023] [Indexed: 07/26/2023]
Abstract
The present Review investigates the interactions between biomaterials and heterocyclic dyes, focusing on their potential application in sustainable wastewater treatment. Heterocyclic dyes are widely used in various industries, resulting in their widespread presence in wastewater, posing environmental challenges. This review explores the utilization of biomaterials as adsorbents for the removal of heterocyclic dyes from contaminated water sources. The interactions between biomaterials, such as cellulose, microfibrilated cellulose and lignin and different heterocyclic dyes are examined through reported experimental analysis and characterization techniques. The study evaluates the adsorption capacity, kinetics, and thermodynamics of the biomaterial-dye systems to elucidate the underlying mechanisms and optimize the treatment process. The review highlight the promising potential of biomaterial-based approaches for sustainable wastewater treatment, providing insights for the development of efficient and environmentally friendly dye removal technologies.
Collapse
Affiliation(s)
- Xiangyuan Kong
- Beijing Jiaotong University, Beijing, 100091, Beijing, China.
| | - Najmeh Zare
- School of Resources and Environment, University of Electronic Science and Technology of China, P.O. Box 611731, Xiyuan Ave, Chengdu, PR China
| | - Zahra Biglari Quchan Atigh
- School of Resources and Environment, University of Electronic Science and Technology of China, P.O. Box 611731, Xiyuan Ave, Chengdu, PR China
| | - Mahsa Fayazi
- School of Resources and Environment, University of Electronic Science and Technology of China, P.O. Box 611731, Xiyuan Ave, Chengdu, PR China
| | - Hassan Karimi-Maleh
- School of Resources and Environment, University of Electronic Science and Technology of China, P.O. Box 611731, Xiyuan Ave, Chengdu, PR China; School of Engineering, Lebanese American University, Byblos, Lebanon.
| | | | | |
Collapse
|
9
|
Hami SSBM, Affandi NDN, Indrie L, Tripa S, Harun AM, Ahmad MR. Enhancing Mechanical Properties and Flux of Nanofibre Membranes for Water Filtration. Polymers (Basel) 2023; 15:3281. [PMID: 37571175 PMCID: PMC10422239 DOI: 10.3390/polym15153281] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/19/2023] [Revised: 07/31/2023] [Accepted: 07/31/2023] [Indexed: 08/13/2023] Open
Abstract
Nanofibres have gained attention for their highly porous structure, narrow pore size, and high specific surface area. One of the most efficient techniques for producing nanofibres is electrospinning. These fibres are used in various fields, including water filtration. Although they possess the ability to filter various components, the fibres generally have low mechanical strength, which can mitigate their performance over time. To address this, studies have focused on enhancing nanofibre membrane strength for water filtration. Previous analyses show that the mechanical properties of nanofibre mats can be improved through solvent vapour treatment, thermal treatment, and chemical crosslinking. These treatments promote interfibre bonding, leading to the improvement of mechanical strength. However, excessive treatment alters nanofibre behaviour. Excessive heat exposure reduces interfibre bonding, while too much solvent vapour decreases pore size and mechanical strength. Thus, a comprehensive understanding of these post-treatments is crucial. This review examines post-treatments aiming to increase the mechanical strength of nanofibre mats, discussing their advantages and disadvantages. Understanding these treatments is essential for optimising nanofibre membrane performance in water filtration and other applications.
Collapse
Affiliation(s)
- Siddratul Sarah Binti Mohd Hami
- Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Selangor, Malaysia; (S.S.B.M.H.); (M.R.A.)
| | - Nor Dalila Nor Affandi
- Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Selangor, Malaysia; (S.S.B.M.H.); (M.R.A.)
| | - Liliana Indrie
- Department of Textiles, Leather and Industrial Management, Faculty of Energy Engineering and Industrial Management, University of Oradea, Universitatii Str. No. 1, 410087 Oradea, Romania;
| | - Simona Tripa
- Department of Textiles, Leather and Industrial Management, Faculty of Energy Engineering and Industrial Management, University of Oradea, Universitatii Str. No. 1, 410087 Oradea, Romania;
| | - Ahmad Mukifza Harun
- Nano Lab, Faculty Engineering, University Malaysia Sabah, Kota Kinabalu 88400, Sabah, Malaysia;
| | - Mohd Rozi Ahmad
- Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Selangor, Malaysia; (S.S.B.M.H.); (M.R.A.)
| |
Collapse
|
10
|
Development of polypropylene membranes grafted with nanocellulose to analyze organic pollutants in environmental waters using miniaturized passive samplers based on liquid-phase microextraction. Microchem J 2023. [DOI: 10.1016/j.microc.2023.108641] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/17/2023]
|
11
|
Zhang G, Chen G, Dong M, Nie J, Ma G. Multifunctional Bacterial Cellulose/Covalent Organic Framework Composite Membranes with Antifouling and Antibacterial Properties for Dye Separation. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37377346 DOI: 10.1021/acsami.3c05074] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/29/2023]
Abstract
Covalent organic frameworks (COFs) have a wide application prospect in wastewater treatment because of their unique structure and properties; however, the preparation of pure COF membranes remains a great challenge by reason of the insolubility and unprocessability of COF powders formed at high temperature and high pressure. In this study, a continuous and defect-free bacterial cellulose/covalent organic framework composite membrane was prepared by using bacterial cellulose (BC) and a porphyrin-based COF with their unique structures and hydrogen bonding forces. The dye rejection rate of this composite membrane toward methyl green and congo red was up to 99%, and the permeance was about 195 L m-2 h-1 bar-1. It showed excellent stability under different pH conditions, long-time filtration, and cyclic experimental conditions. In addition, the hydrophilicity and surface negativity of the BC/COF composite membrane made it have certain antifouling performance, and the flux recovery rate can reach 93.72%. More importantly, the composite membrane exhibited excellent antibacterial properties due to the doping of the porphyrin-based COF, and the survival rates of both Escherichia coli and Staphylococcus aureus were less than 1% after exposure to visible light. The self-supporting BC/COF composite membrane synthesized by this strategy also has outstanding antifouling and antibacterial properties, in addition to excellent dye separation effects, which greatly broaden the application of COF materials in water treatment.
Collapse
Affiliation(s)
- Guomeng Zhang
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
- Beijing Laboratory of Biomedical Materials, Key Laboratory of Biomedical Materials of Nature Macromolecules, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Guangkai Chen
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
- Beijing Laboratory of Biomedical Materials, Key Laboratory of Biomedical Materials of Nature Macromolecules, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Mei Dong
- School of Chemistry and Chemical Engineering, Ningxia University, Yinchuan 750021, P. R. China
| | - Jun Nie
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
- Beijing Laboratory of Biomedical Materials, Key Laboratory of Biomedical Materials of Nature Macromolecules, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Guiping Ma
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
- Beijing Laboratory of Biomedical Materials, Key Laboratory of Biomedical Materials of Nature Macromolecules, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| |
Collapse
|
12
|
El Shall FN, Al-Shemy MT, Dawwam GE. Multifunction smart nanocomposite film for food packaging based on carboxymethyl cellulose/Kombucha SCOBY/pomegranate anthocyanin pigment. Int J Biol Macromol 2023:125101. [PMID: 37245764 DOI: 10.1016/j.ijbiomac.2023.125101] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2023] [Revised: 04/26/2023] [Accepted: 05/23/2023] [Indexed: 05/30/2023]
Abstract
Active packing systems employed to preserve food quality have gone through chains of sustainable development processes, reflecting the growth in consumer awareness of high-quality foods in eco-friendly packaging. Consequently, this study aims to develop antioxidant, antimicrobial, UV-shielding, pH-sensitive, edible, and flexible films from composites of carboxymethyl cellulose (CMC), pomegranate anthocyanin extract (PAE), and various fractions (1-15 %) of bacterial cellulose from the Kombucha SCOBY (BC Kombucha). Various analytical tools such as ATR-FTIR, XRD, TGA, and TEM were utilized to investigate the physicochemical characterization of BC Kombucha and CMC-PAE/BC Kombucha films. The DDPH scavenging test demonstrated the efficiency of PAE as a matrix with potent antioxidant properties, both as a solution and enclosed in composite films. The fabricated films of CMC-PAE/BC Kombucha showed antimicrobial activities against many pathogenic Gram-negative (Pseudomonas aeruginosa, Salmonella sp., and Escherichia coli), Gram-positive (Listeria monocytogenes and Staphylococcus aureus) bacteria, and Candida albicans, ranging from a 20 to 30 mm inhibition zone. The CMC-PAE/BC Kombucha nanocomposite has additionally been utilized to pack red grapes and plums. The results illustrated that CMC-PAE/BC Kombucha nanocomposite can increase red grapes and plums' shelf lives by up to 25 days while maintaining the fruits' quality better than those left unpacked.
Collapse
Affiliation(s)
- Fatma N El Shall
- Dyeing, Printing and Textile Auxiliary Department, National Research Centre, 33 El-Bohouth St. (Former El-Tahrir St), P.O. 12622, Dokki, Giza, Egypt.
| | - Mona T Al-Shemy
- Cellulose and Paper Department, National Research Centre, 33 El-Bohouth St. (Former El-Tahrir St), P.O. 12622, Dokki, Giza, Egypt.
| | - Ghada E Dawwam
- Botany and Microbiology Department, Faculty of Science, Benha University, Benha, Egypt.
| |
Collapse
|
13
|
Bej S, Sarma H, Ghosh M, Banerjee P. Metal-organic frameworks/cellulose hybrids with their modern technological implementation towards water treatment. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 323:121278. [PMID: 36791948 DOI: 10.1016/j.envpol.2023.121278] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2022] [Revised: 01/23/2023] [Accepted: 02/11/2023] [Indexed: 06/18/2023]
Abstract
Metal-organic frameworks (MOFs) are amongst the most attractive porous polymeric networks with appealing properties. However, their inherent fragility, powder nature, low processibility, and handling present some exceptional challenges for high-tech commercial applications. Currently, economic and environmental concerns drive the development of some bioinspired polymeric matrices containing MOFs. As an artifact, the availability of previously unattainable properties is negotiated by conjugating cellulosic materials with crystalline MOFs. Thus, multi-dimensional organic-inorganic hybrid composites are formed with high electrical, optical, mechanical, and thermal features. These MOF/cellulose hybrids, known as CelloMOFs (cellulose MOFs), have remarkable mechanical properties with tunable porosities, specific surface area and accessible active sites, making them ideal for real-world troubleshooting applications such as wastewater treatment, chemical sensing, energy storage, and so on. In this review, current state-of-the-art strategic synthesis routes for fabrication of MOF/cellulose composites with a specific focus on CelloMOFs as a potential tool for mitigation of the targeted emerging water contaminants have been done under the same umbrella, which has previously been less explored. Streamlining discussions on general properties such as raw material selection, structural analysis of cellulose, availability of surface functional groups, cellulose-metal node interactions, cellulose charging, and so on have been emphasized, as has integration with robust MOFs. A better understanding of these fundamental properties is critical because they will have a significant impact on the performance of MOF/cellulose composites in a variety of applications. Furthermore, at the end of this review, the challenges and perspectives of using CelloMOFs have been discussed in a concise manner in order to improve their practical utility rather than just concept mapping.
Collapse
Affiliation(s)
- Sourav Bej
- Surface Engineering and Tribology Division, CSIR-Central Mechanical Engineering Research Institute (CMERI), Mahatma Gandhi Avenue, Durgapur, 713209, West Bengal, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, Uttar Pradesh, India
| | - Hemen Sarma
- Bioremediation Technology Group, Department of Botany, Bodoland University, Rangalikhata, Deborgaon, Kokrajhar (BTR), Assam, 783370, India.
| | - Meenakshi Ghosh
- Vidyasagar College for Women, 39 Sankar Ghosh Lane, Kolkata, 6, West Bengal, India
| | - Priyabrata Banerjee
- Surface Engineering and Tribology Division, CSIR-Central Mechanical Engineering Research Institute (CMERI), Mahatma Gandhi Avenue, Durgapur, 713209, West Bengal, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, Uttar Pradesh, India.
| |
Collapse
|
14
|
Aljlil S. A Mathematical Simulation of Copper and Nickel Ions Separation Using Prepared Nanocellulose Material. MEMBRANES 2023; 13:381. [PMID: 37103808 PMCID: PMC10146762 DOI: 10.3390/membranes13040381] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Revised: 03/19/2023] [Accepted: 03/24/2023] [Indexed: 06/19/2023]
Abstract
Environmental risks can arise from the existence of heavy metals in wastewater and their land disposal. To address this concern, a mathematical technique is introduced in this article that enables the anticipation of breakthrough curves and the imitation of copper and nickel ion separation onto nanocellulose in a fixed-bed system. The mathematical model is based on mass balances for copper and nickel and partial differential equations for pore diffusion in a fixed bed. The study evaluates the impact of experimental parameters such as bed height and initial concentration on the shape of the breakthrough curves. At 20 °C, the maximum adsorption capacities for copper and nickel ions on nanocellulose were 5.7 mg/g and 5 mg/g, respectively. The breakthrough point decreased with increasing solution concentration at higher bed heights, while at an initial concentration of 20 mg/L, the breakthrough point increased with bed height. The fixed-bed pore diffusion model showed excellent agreement with the experimental data. The use of this mathematical approach can help alleviate the environmental hazards that arise from the presence of heavy metals in wastewater. The study highlights the potential of nanocellulose as a material for membrane technology, which can effectively address these risks.
Collapse
Affiliation(s)
- Saad Aljlil
- Institute of Water Management & Treatment Technologies, King Abdulaziz City for Science and Technology (KACST), Riyadh 11442, Saudi Arabia
| |
Collapse
|
15
|
Kokol V, Kos M, Vivod V, Gunde-Cimerman N. Cationised Fibre-Based Cellulose Multi-Layer Membranes for Sterile and High-Flow Bacteria Retention and Inactivation. MEMBRANES 2023; 13:284. [PMID: 36984670 PMCID: PMC10059598 DOI: 10.3390/membranes13030284] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 02/10/2023] [Accepted: 02/21/2023] [Indexed: 06/18/2023]
Abstract
Low-cost, readily available, or even disposable membranes in water purification or downstream biopharma processes are becoming attractive alternatives to expensive polymeric columns or filters. In this article, the potential of microfiltration membranes prepared from differently orientated viscose fibre slivers, infused with ultrafine quaternised (qCNF) and amino-hydrophobised (aCNF) cellulose nanofibrils, were investigated for capturing and deactivating the bacteria from water during vacuum filtration. The morphology and capturing mechanism of the single- and multi-layer structured membranes were evaluated using microscopic imaging and colloidal particles. They were assessed for antibacterial efficacy and the retention of selected bacterial species (Escherichia coli, Staphylococcus aureus, Micrococcus luteus), differing in the cell envelope structure, hydrodynamic biovolume (shape and size) and their clustering. The aCNF increased biocidal efficacy significantly when compared to qCNF-integrated membrane, although the latter retained bacteria equally effectively by a thicker multi-layer structured membrane. The retention of bacterial cells occurred through electrostatic and hydrophobic interactions, as well as via interfibrous pore diffusion, depending on their physicochemical properties. For all bacterial strains, the highest retention (up to 100% or log 6 reduction) at >50 L/h∗bar∗m2 flow rate was achieved with a 4-layer gradient-structured membrane containing different aCNF content, thereby matching the performance of industrial polymeric filters used for removing bacteria.
Collapse
Affiliation(s)
- Vanja Kokol
- Faculty of Mechanical Engineering, Institute of Engineering Materials and Design, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia
| | - Monika Kos
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, 1000 Ljubljana, Slovenia
| | - Vera Vivod
- Faculty of Mechanical Engineering, Institute of Engineering Materials and Design, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia
| | - Nina Gunde-Cimerman
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, 1000 Ljubljana, Slovenia
| |
Collapse
|
16
|
Recent developments in GO/Cellulose based composites: Properties, synthesis, and its applications. POLYMER 2023. [DOI: 10.1016/j.polymer.2023.125786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/19/2023]
|
17
|
Kwon H, Park Y, Yang E, Bae TH. Graphene Oxide-Based Membranes Intercalated with an Aromatic Crosslinker for Low-Pressure Nanofiltration. MEMBRANES 2022; 12:966. [PMID: 36295725 PMCID: PMC9612350 DOI: 10.3390/membranes12100966] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/14/2022] [Revised: 09/27/2022] [Accepted: 09/28/2022] [Indexed: 06/16/2023]
Abstract
Graphene oxide (GO), a carbonaceous 2D nanomaterial, has received significant interest as a next-generation membrane building block. To fabricate high-performance membranes, an effective strategy involves stacking GO nanosheets in laminated structures, thereby creating unique nanochannel galleries. One outstanding merit of laminar GO membranes is that their permselectivity is readily tunable by tailoring the size of the nanochannels. Here, a high-performance GO-based nanofiltration membrane was developed by intercalating an aromatic crosslinker, α,α/-dichloro-p-xylene (DCX), between the layers in laminated GO nanosheets. Owing to the formation of strong covalent bonds between the crosslinker and the GO, the resulting GO laminate membrane exhibited outstanding structural stability. Furthermore, due to the precisely controlled and enlarged interlayer spacing distance of the developed DCX-intercalated GO membrane, it achieved an over two-fold enhancement in water permeability (11 ± 2 LMH bar-1) without sacrificing the rejection performance for divalent ions, contrary to the case with a pristine GO membrane.
Collapse
Affiliation(s)
- Hyuntak Kwon
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Korea
| | - Yongju Park
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Korea
| | - Euntae Yang
- Department of Marine Environmental Engineering, College of Marine Science, Gyeongsang National University, Tongyeong 53064, Korea
| | - Tae-Hyun Bae
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Korea
| |
Collapse
|
18
|
Xi J, Lou Y, Chu Y, Meng L, Wei H, Dai H, Xu Z, Xiao H, Wu W. High-flux bacterial cellulose ultrafiltration membrane with controllable pore structure. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130428] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
19
|
Trache D, Tarchoun AF, Abdelaziz A, Bessa W, Hussin MH, Brosse N, Thakur VK. Cellulose nanofibrils-graphene hybrids: recent advances in fabrication, properties, and applications. NANOSCALE 2022; 14:12515-12546. [PMID: 35983896 DOI: 10.1039/d2nr01967a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
With the fast-developing social economy and the acceleration of industrialization, seeking effective renewable, sustainable, and environmentally friendly resources that show promising properties is an urgent task and a crucial means to achieve sustainable progress in the face of the growing depletion of non-renewable resources and the deterioration of environmental issues. Cellulose nanofibrils (CNFs) are natural polymeric nanomaterials with excellent biocompatibility, biodegradability, good mechanical features, high strength, low density, high specific surface area, and tunable chemistry. Their combination with other nanomaterials, such as graphene derivatives (GNMs), has been demonstrated to be effective since they produce hybrids with outstanding physicochemical properties, tailorable functionality, and high performance. In this review, recent advances in the preparation, modification, and emerging application of CNFs/GNMs hybrids are described and discussed using the latest studies. First, the concise background of nanocellulose and graphene derivatives is provided, followed by the interfacial interactions between CNFs and GNMs. The different hybrids exhibit great promise in separation, adsorption, optics, flexible electronics, energy storage, thermal management, barrier and packaging, and electromagnetic shielding. The main challenges that inhibit the applicability of these hybrids are finally highlighted, and some perspectives for future research directions are provided.
Collapse
Affiliation(s)
- Djalal Trache
- Energetic Materials Laboratory, Teaching and Research Unit of Energetic Processes, Ecole Militaire Polytechnique, BP 17, Bordj El-Bahri, 16046, Algiers, Algeria.
| | - Ahmed Fouzi Tarchoun
- Energetic Propulsion Laboratory, Teaching and Research Unit of Energetic Processes, Ecole Militaire Polytechnique, BP 17, Bordj El-Bahri, 16046, Algiers, Algeria
| | - Amir Abdelaziz
- Energetic Materials Laboratory, Teaching and Research Unit of Energetic Processes, Ecole Militaire Polytechnique, BP 17, Bordj El-Bahri, 16046, Algiers, Algeria.
| | - Wissam Bessa
- Energetic Materials Laboratory, Teaching and Research Unit of Energetic Processes, Ecole Militaire Polytechnique, BP 17, Bordj El-Bahri, 16046, Algiers, Algeria.
| | - M Hazwan Hussin
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia
| | - Nicolas Brosse
- Laboratoire d'Etude et de Recherche sur le MAtériau Bois (LERMAB), Faculté des Sciences et Techniques, Université de Lorraine, Bld. des Aiguillettes, F-54500, Vandœuvre-lès-Nancy, France
| | - Vijay Kumar Thakur
- Biorefining and Advanced Materials Research Center, Scotland's Rural College (SRUC), Kings Buildings, Edinburgh EH9 3JG, UK
- School of Engineering, University of Petroleum and Energy Studies (UPES), Dehradun, 248007 Uttarakhand, India
- Centre for Research and Development, Chandigarh University, Mohali, 140413 Punjab, India
- Department of Biotechnology, Graphic Era Deemed to be University, Dehradun 248002, Uttarakhand, India
| |
Collapse
|
20
|
Norfarhana A, Ilyas R, Ngadi N. A review of nanocellulose adsorptive membrane as multifunctional wastewater treatment. Carbohydr Polym 2022; 291:119563. [DOI: 10.1016/j.carbpol.2022.119563] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2022] [Revised: 04/26/2022] [Accepted: 04/29/2022] [Indexed: 01/08/2023]
|
21
|
A Review of Properties of Nanocellulose, Its Synthesis, and Potential in Biomedical Applications. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12147090] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Cellulose is the most venerable and essential natural polymer on the planet and is drawing greater attention in the form of nanocellulose, considered an innovative and influential material in the biomedical field. Because of its exceptional physicochemical characteristics, biodegradability, biocompatibility, and high mechanical strength, nanocellulose attracts considerable scientific attention. Plants, algae, and microorganisms are some of the familiar sources of nanocellulose and are usually grouped as cellulose nanocrystal (CNC), cellulose nanofibril (CNF), and bacterial nanocellulose (BNC). The current review briefly highlights nanocellulose classification and its attractive properties. Further functionalization or chemical modifications enhance the effectiveness and biodegradability of nanocellulose. Nanocellulose-based composites, printing methods, and their potential applications in the biomedical field have also been introduced herein. Finally, the study is summarized with future prospects and challenges associated with the nanocellulose-based materials to promote studies resolving the current issues related to nanocellulose for tissue engineering applications.
Collapse
|
22
|
Al-Shemy MT, Al-Sayed A, Dacrory S. Fabrication of sodium alginate/graphene oxide/nanocrystalline cellulose scaffold for methylene blue adsorption: Kinetics and thermodynamics study. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.120825] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
23
|
Wang Q, Liu S, Liu J, Sun J, Zhang Z, Zhu Q. Sustainable cellulose nanomaterials for environmental remediation - Achieving clean air, water, and energy: A review. Carbohydr Polym 2022; 285:119251. [DOI: 10.1016/j.carbpol.2022.119251] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2021] [Revised: 02/09/2022] [Accepted: 02/09/2022] [Indexed: 01/09/2023]
|
24
|
Nanofiltration Performance of Glutaraldehyde Crosslinked Graphene Oxide-Cellulose Nanofiber Membrane. Chem Eng Res Des 2022. [DOI: 10.1016/j.cherd.2022.04.039] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
25
|
Das R, Lindström T, Sharma PR, Chi K, Hsiao BS. Nanocellulose for Sustainable Water Purification. Chem Rev 2022; 122:8936-9031. [PMID: 35330990 DOI: 10.1021/acs.chemrev.1c00683] [Citation(s) in RCA: 56] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.
Collapse
Affiliation(s)
- Rasel Das
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Tom Lindström
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States.,KTH Royal Institute of Technology, Stockholm 100 44, Sweden
| | - Priyanka R Sharma
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Kai Chi
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Benjamin S Hsiao
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| |
Collapse
|
26
|
Sadare OO, Yoro KO, Moothi K, Daramola MO. Lignocellulosic Biomass-Derived Nanocellulose Crystals as Fillers in Membranes for Water and Wastewater Treatment: A Review. MEMBRANES 2022; 12:membranes12030320. [PMID: 35323795 PMCID: PMC8951035 DOI: 10.3390/membranes12030320] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/07/2021] [Revised: 12/31/2021] [Accepted: 01/03/2022] [Indexed: 12/29/2022]
Abstract
The improvement of membrane applications for wastewater treatment has been a focal point of research in recent times, with a wide variety of efforts being made to enhance the performance, integrity and environmental friendliness of the existing membrane materials. Cellulose nanocrystals (CNCs) are sustainable nanomaterials derived from microorganisms and plants with promising potential in wastewater treatment. Cellulose nanomaterials offer a satisfactory alternative to other environmentally harmful nanomaterials. However, only a few review articles on this important field are available in the open literature, especially in membrane applications for wastewater treatment. This review briefly highlights the circular economy of waste lignocellulosic biomass and the isolation of CNCs from waste lignocellulosic biomass for membrane applications. The surface chemical functionalization technique for the preparation of CNC-based materials with the desired functional groups and properties is outlined. Recent uses of CNC-based materials in membrane applications for wastewater treatment are presented. In addition, the assessment of the environmental impacts of CNCs, cellulose extraction, the production techniques of cellulose products, cellulose product utilization, and their end-of-life disposal are briefly discussed. Furthermore, the challenges and prospects for the development of CNC from waste biomass for application in wastewater treatment are discussed extensively. Finally, this review unraveled some important perceptions on the prospects of CNC-based materials, especially in membrane applications for the treatment of wastewater.
Collapse
Affiliation(s)
- Olawumi O. Sadare
- Department of Chemical Engineering, Faculty of Engineering the Built Environment, Doornfontein Campus, University of Johannesburg, P.O. Box 17011, Johannesburg 2028, South Africa;
- Correspondence: ; Tel.: +27-843618562
| | - Kelvin O. Yoro
- Energy Technologies Area, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720, USA;
| | - Kapil Moothi
- Department of Chemical Engineering, Faculty of Engineering the Built Environment, Doornfontein Campus, University of Johannesburg, P.O. Box 17011, Johannesburg 2028, South Africa;
| | - Michael O. Daramola
- Department of Chemical Engineering, Faculty of Engineering, Built Environment and Information Technology, University of Pretoria, Hatfield, Pretoria 0028, South Africa;
| |
Collapse
|
27
|
Jaffar SS, Saallah S, Misson M, Siddiquee S, Roslan J, Saalah S, Lenggoro W. Recent Development and Environmental Applications of Nanocellulose-Based Membranes. MEMBRANES 2022; 12:287. [PMID: 35323762 PMCID: PMC8950644 DOI: 10.3390/membranes12030287] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/31/2022] [Revised: 02/22/2022] [Accepted: 02/24/2022] [Indexed: 12/10/2022]
Abstract
Extensive research and development in the production of nanocellulose production, a green, bio-based, and renewable biomaterial has paved the way for the development of advanced functional materials for a multitude of applications. From a membrane technology perspective, the exceptional mechanical strength, high crystallinity, tunable surface chemistry, and anti-fouling behavior of nanocellulose, manifested from its structural and nanodimensional properties are particularly attractive. Thus, an opportunity has emerged to exploit these features to develop nanocellulose-based membranes for environmental applications. This review provides insights into the prospect of nanocellulose as a matrix or as an additive to enhance membrane performance in water filtration, environmental remediation, and the development of pollutant sensors and energy devices, focusing on the most recent progress from 2017 to 2022. A brief overview of the strategies to tailor the nanocellulose surface chemistry for the effective removal of specific pollutants and nanocellulose-based membrane fabrication approaches are also presented. The major challenges and future directions associated with the environmental applications of nanocellulose-based membranes are put into perspective, with primary emphasis on advanced multifunctional membranes.
Collapse
Affiliation(s)
- Syafiqah Syazwani Jaffar
- Biotechnology Research Institute, Universiti Malaysia Sabah, Kota Kinabalu 88400, Malaysia; (S.S.J.); (M.M.); (S.S.)
| | - Suryani Saallah
- Biotechnology Research Institute, Universiti Malaysia Sabah, Kota Kinabalu 88400, Malaysia; (S.S.J.); (M.M.); (S.S.)
| | - Mailin Misson
- Biotechnology Research Institute, Universiti Malaysia Sabah, Kota Kinabalu 88400, Malaysia; (S.S.J.); (M.M.); (S.S.)
| | - Shafiquzzaman Siddiquee
- Biotechnology Research Institute, Universiti Malaysia Sabah, Kota Kinabalu 88400, Malaysia; (S.S.J.); (M.M.); (S.S.)
| | - Jumardi Roslan
- Faculty of Food Science and Nutrition, Universiti Malaysia Sabah, Kota Kinabalu 88400, Malaysia;
| | - Sariah Saalah
- Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu 88400, Malaysia;
| | - Wuled Lenggoro
- Institute of Engineering, Tokyo University of Agriculture and Technology, Tokyo 184-8588, Japan;
| |
Collapse
|
28
|
Rostamian M, Hosseini H, Fakhri V, Talouki PY, Farahani M, Gharehtzpeh AJ, Goodarzi V, Su CH. Introducing a bio sorbent for removal of methylene blue dye based on flexible poly(glycerol sebacate)/chitosan/graphene oxide ecofriendly nanocomposites. CHEMOSPHERE 2022; 289:133219. [PMID: 34902387 DOI: 10.1016/j.chemosphere.2021.133219] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2021] [Revised: 12/04/2021] [Accepted: 12/06/2021] [Indexed: 06/14/2023]
Abstract
As a consequence of industrial activities, one of the most prevalent components in wastewater is Water-soluble dyes needed to be removed. In this research, eco-friendly adsorbents based on poly(glycerol sebacate) (PGS), including PGS-graphene oxide nanoparticles (GO), PGS-graft-chitosan(CS), and PGS-CS-GO nanocomposites, have been proposed as efficient dye adsorbents for the wastewater treatment procedure. FESEM images showed that a smooth and uniform structure was created over incorporating CS into PGS. Besides, the presence of CS within PGS/GO nanocomposites had a positive impact on the exfoliation of GO. Moreover, it was found that the incorporation of both CS and GO into PGS reduced the glass transition of PGS. Besides, their coexistence can probably increase the chain regularity in the polymer matrix and cause a relatively larger crystal size of PGS. In this regard, the ternary nanocomposite saw a Tg value of -29.4 °C. A high adsorption capacity of 178 mg g-1, as well as 99 removal% efficiency, were observed in the case of the PGS-CS-GO sample after 300 min at a dye concentration of 100 mg L-1 and pH 7. Additionally, the adsorption capacity value of the adsorbent was preserved around 129 mg g-1 after 7 cycles of adsorption-desorption. The findings revealed that innovatively synthesized PGS-g-CS/GO nanocomposites could efficiently remove methylene blue from water solutions. Hence, they can be used as a powerful and influential dye adsorbent to purify water solutions.
Collapse
Affiliation(s)
- Mostafa Rostamian
- Department of Biomedical Engineering Faculty, Islamic Azad University, South Tehran Branch, P.O. Box 19585-466, Tehran, Iran
| | - Hadi Hosseini
- Faculty of Engineering & Technology, University of Mazandaran, Babolsar, Iran
| | - Vafa Fakhri
- Department of Polymer Engineering, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran, Iran
| | - Pardis Yousefi Talouki
- Department of Biomedical Engineering, Center Tehran Branch, Islamic Azad University, Tehran, Iran
| | - Masoud Farahani
- School of Chemical Engineering, College of Engineering, University of Tehran, P. O. Box 11155-4563, Tehran, Iran
| | - Ali Jalali Gharehtzpeh
- Department of Polymer Engineering, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran, Iran
| | - Vahabodin Goodarzi
- Applied Biotechnology Research Center, Baqiyatallah University of Medical Sciences, P.O.Box 19945-546, Tehran, Iran.
| | - Chia-Hung Su
- Department of Chemical Engineering, Ming Chi University of Technology, New Taipei City, Taiwan.
| |
Collapse
|
29
|
|
30
|
Abstract
Cellulose nanomaterials (CNs) are renewable, bio-derived materials that can address not only technological challenges but also social impacts. This ability results from their unique properties, for example, high mechanical strength, high degree of crystallinity, biodegradable, tunable shape, size, and functional surface chemistry. This minireview provides chemical and physical features of cellulose nanomaterials and recent developments as an adsorbent and an antimicrobial material generated from bio-renewable sources.
Collapse
|
31
|
Hosseini H, Zirakjou A, McClements DJ, Goodarzi V, Chen WH. Removal of methylene blue from wastewater using ternary nanocomposite aerogel systems: Carboxymethyl cellulose grafted by polyacrylic acid and decorated with graphene oxide. JOURNAL OF HAZARDOUS MATERIALS 2022; 421:126752. [PMID: 34352524 DOI: 10.1016/j.jhazmat.2021.126752] [Citation(s) in RCA: 60] [Impact Index Per Article: 30.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/08/2021] [Revised: 07/14/2021] [Accepted: 07/25/2021] [Indexed: 06/13/2023]
Abstract
In this study, environmentally-friendly nanocomposite hydrogels were fabricated. These hydrogels consisted of semi-interpenetrating networks of carboxymethyl cellulose (CMC) molecules grafted to polyacrylic acid (PAA), as an eco-friendly and non-toxic polymer with numerous carboxyl and hydroxyl functional groups, which were reinforced with different levels of graphene oxide particles (0.5, 1.5 or 3% wt). Field-emission electron scanning microscopy (FESEM) images indicated that the pore size of the nanocomposites decreased with increasing graphic oxide concentration. The presence of the graphic oxide increased the storage modulus and thermal stability of the nanocomposite hydrogels. The hydrogels had an adsorption capacity of 138 mg/g of a model cationic dye pollutant (methylene blue) after 250 min. Moreover, a reusability test showed that the adsorption capacity remained at around 90% after 9 cycles. Density functional theory (DFT) simulations suggested that the adsorption of methylene blue was mainly a result of π-π bonds, hydrogen bonds, and electrostatic interactions with graphene oxide. Our results indicated that the nanocomposite hydrogels fabricated in this study may be eco-friendly, stable, efficient, and reusable adsorbents for ionic pollutants in wastewater treatment.
Collapse
Affiliation(s)
- Hadi Hosseini
- Faculty of Engineering & Technology, University of Mazandaran, Babolsar, Iran
| | - Abbas Zirakjou
- School of Metallurgy & Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
| | | | - Vahabodin Goodarzi
- Applied Biotechnology Research Center, Baqiyatallah University of Medical Sciences, P.O. Box 19945-546, Tehran, Iran.
| | - Wei-Hsin Chen
- Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 701, Taiwan; Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung 407, Taiwan; Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung 411, Taiwan
| |
Collapse
|
32
|
Cellulose–metal organic frameworks (CelloMOFs) hybrid materials and their multifaceted Applications: A review. Coord Chem Rev 2022. [DOI: 10.1016/j.ccr.2021.214263] [Citation(s) in RCA: 65] [Impact Index Per Article: 32.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
|
33
|
Abdelhamid HN, Mathew AP. Cellulose-Based Materials for Water Remediation: Adsorption, Catalysis, and Antifouling. FRONTIERS IN CHEMICAL ENGINEERING 2021. [DOI: 10.3389/fceng.2021.790314] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022] Open
Abstract
Cellulose-based materials have been advanced technologies that used in water remediation. They exhibit several advantages being the most abundant biopolymer in nature, high biocompatibility, and contain several functional groups. Cellulose can be prepared in several derivatives including nanomaterials such as cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibrils (TOCNF). The presence of functional groups such as carboxylic and hydroxyls groups can be modified or grafted with organic moieties offering extra functional groups customizing for specific applications. These functional groups ensure the capability of cellulose biopolymers to be modified with nanoparticles such as metal-organic frameworks (MOFs), graphene oxide (GO), silver (Ag) nanoparticles, and zinc oxide (ZnO) nanoparticles. Thus, they can be applied for water remediation via removing water pollutants including heavy metal ions, organic dyes, drugs, and microbial species. Cellulose-based materials can be also used for removing microorganisms being active as membranes or antibacterial agents. They can proceed into various forms such as membranes, sheets, papers, foams, aerogels, and filters. This review summarized the applications of cellulose-based materials for water remediation via methods such as adsorption, catalysis, and antifouling. The high performance of cellulose-based materials as well as their simple processing methods ensure the high potential for water remediation.
Collapse
|
34
|
Akatan K, Kuanyshbekov T, Kabdrakhmanova S, Imasheva A, Battalova A, Abylkalykova R, Nasyrova A, Ibraeva Z. Synthesis of nanocomposite material through modification of graphene oxide by nanocellulose. CHEMICAL BULLETIN OF KAZAKH NATIONAL UNIVERSITY 2021. [DOI: 10.15328/cb1238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
Abstract
Intensive research of nanocomposites contributes to the development of new materials in the fields of medicine, nanoelectronics, energy, biotechnology, information technology. Therefore, the synthesis of new materials by modifying of graphene oxide (GO) with nanocellulose and the study of its properties are of great interest. In this study synthesized nanocomposite material by modifying of graphene oxide (GO) from activated carbon (BAU-A) in a 1:1 volume ratio with nanocellulose (NC) from hemp stems belonging to the annual plant, and their chemical structure was studied by FTIR and UV-spectroscopy. The results of the study showed the absorption of the etheric bond C = O in the UV spectrum at full length 243 nm. The IR spectrum showed all the new etheric bonds O = C - OH at a wavelength of 1625 cm-1. The average particle sizes of GO was 352 nm and NC was 470 nm in length and 80 nm in width. The SEM analysis indicating the NC as a contact layer between ultralow thicknesses of the GO layers. The XRD analysis indicated GO-NC composite film is a substance comprising GO and NC. According to the results, modification of graphene oxide showed that its scope can be expanded as much as possible.
Collapse
|
35
|
Ahmed A, Adak B, Faruk MO, Mukhopadhyay S. Nanocellulose Coupled 2D Graphene Nanostructures: Emerging Paradigm for Sustainable Functional Applications. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c01830] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Affiliation(s)
- Abbas Ahmed
- Polymer Program, Institute of Materials Science, University of Connecticut, Storrs, Connecticut 06269, United States
- Department of Textile and Fiber Engineering, Indian Institute of Technology, New Delhi 110016, India
- National Institute of Textile Engineering and Research, University of Dhaka, Dhaka 1000, Bangladesh
| | - Bapan Adak
- Product Development Department, Kusumgar Corporates Pvt. Ltd., Vapi, Valsad, Gujarat 396195, India
| | - Md. Omar Faruk
- National Institute of Textile Engineering and Research, University of Dhaka, Dhaka 1000, Bangladesh
| | - Samrat Mukhopadhyay
- Department of Textile and Fiber Engineering, Indian Institute of Technology, New Delhi 110016, India
| |
Collapse
|
36
|
Dhali K, Ghasemlou M, Daver F, Cass P, Adhikari B. A review of nanocellulose as a new material towards environmental sustainability. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 775:145871. [PMID: 33631573 DOI: 10.1016/j.scitotenv.2021.145871] [Citation(s) in RCA: 94] [Impact Index Per Article: 31.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/13/2020] [Revised: 02/09/2021] [Accepted: 02/10/2021] [Indexed: 06/12/2023]
Abstract
Synthetic polymers, commonly referred to as plastics, are anthropogenic contaminants that adversely affect the natural ecosystems. The continuous disposal of long lifespan plastics has resulted in the accumulation of plastic waste, leading to significant pollution of both marine and terrestrial habitats. Scientific pursuit to seek environment-friendly materials from renewable resources has focused on cellulose, the primary reinforcement component of the cell wall of plants, as it is the most abundantly available biopolymer on earth. This paper provides an overview on the current state of science on nanocellulose research; highlighting its extraction procedures from lignocellulosic biomass. Literature shows that the process used to obtain nanocellulose from lignocellulosic biomass greatly influences its morphology, properties and surface chemistry. The efficacy of chemical methods that use alkali, acid, bleaching agents, ionic liquids, deep eutectic solvent for pre-treatment of biomass is discussed. There has been a continuous endeavour to optimize the pre-treatment protocol as it is specific to lignocellulosic biomass and also depends on factors such as nature of the biomass, process and environmental parameters and economic viability. Nanofibers are primarily isolated through mechanical fibrillation while nanocrystals are predominantly extracted using acid hydrolysis. A concise overview on the ways to improve the yield of nanocellulose from cellulosic biomass is also presented in this review. This work also reviews the techniques used to modify the surface properties of nanocellulose by functionalizing surface hydroxyl groups to impart desirable hydrophilic-hydrophobic balance. An assessment on the emerging application of nanocellulose with an emphasis on development of nanocomposite materials for designing environmentally sustainable products is incorporated. Finally, the status of the industrial production of nanocellulose presented, which indicates that there is a continuously increased demand for cellulose nanomaterials. The demand for cellulose is expected to increase further due to its increasing and broadening applications.
Collapse
Affiliation(s)
- Kingshuk Dhali
- School of Science, RMIT University, Melbourne, VIC 3083, Australia; Department of Post-Harvest Engineering, Faculty of Agricultural Engineering, Bidhan Chandra Krishi Viswavidyalaya, Nadia, W.B., India
| | - Mehran Ghasemlou
- School of Science, RMIT University, Melbourne, VIC 3083, Australia
| | - Fugen Daver
- School of Engineering, RMIT University, Melbourne, VIC 3083, Australia
| | - Peter Cass
- Manufacturing, Commonwealth Scientific and Industrial Research Organization (CSIRO) Clayton, VIC 3168, Australia
| | - Benu Adhikari
- School of Science, RMIT University, Melbourne, VIC 3083, Australia.
| |
Collapse
|
37
|
Production of Bacterial Cellulose from Acetobacter Species and Its Applications – A Review. JOURNAL OF PURE AND APPLIED MICROBIOLOGY 2021. [DOI: 10.22207/jpam.15.2.48] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
Abstract
Bacterial cellulose (BC) is a natural polymer secreted as a protective cell covering of certain bacterial species. In contrary to plant cellulose, BC possesses some unique features like high moisture-holding capacity, high durability, high liquid absorbing capabilities, biostability, and biodegradability, makes BC an excellent raw material in wide-ranging areas like biomedical, food, agriculture, paper, textile industries and electronics. The main objective of this review is to discuss various aspects of BC production (different sources for bacterial strain isolation, culture media and, its alternatives also major culture techniques). In addition, various applications of BC are also reviewed.
Collapse
|
38
|
Georgouvelas D, Abdelhamid HN, Li J, Edlund U, Mathew AP. All-cellulose functional membranes for water treatment: Adsorption of metal ions and catalytic decolorization of dyes. Carbohydr Polym 2021; 264:118044. [PMID: 33910746 DOI: 10.1016/j.carbpol.2021.118044] [Citation(s) in RCA: 61] [Impact Index Per Article: 20.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2021] [Revised: 03/24/2021] [Accepted: 04/03/2021] [Indexed: 12/14/2022]
Abstract
In this study, we present a facile, one-step method for the manufacturing of all-cellulose, layered membranes containing cellulose nanocrystals (CNC), TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibers (TO-CNF), or zwitterionic polymer grafted cellulose nanocrystals (CNC-g-PCysMA) as functional entities in combination with cellulose fibers and commercial grade microfibrillated cellulose. The presence of active sites such as hydroxyl, carbonyl, thioethers, and amines, gave the membranes high adsorption capacities for the metal ions Au (III), Co (II), and Fe (III), as well as the cationic organic dye methylene blue (MB). Furthermore, the membranes served as excellent metal-free catalysts for the decolorization of dyes via hydrogenation. A 3-fold increase of the hydrogenation efficiency for cationic dyes such as rhodamine B (RhB) and methylene blue was obtained in the presence of membranes compared to NaBH4 alone. Water-based processing, the abundance of the component materials, and the multifunctional characteristics of the membranes ensure their potential as excellent candidates for water purification systems.
Collapse
Affiliation(s)
- Dimitrios Georgouvelas
- Division of Materials and Environmental Chemistry, Stockholm University, Svante Arrhenius väg 16 C, Stockholm, SE-10691, Sweden
| | - Hani Nasser Abdelhamid
- Division of Materials and Environmental Chemistry, Stockholm University, Svante Arrhenius väg 16 C, Stockholm, SE-10691, Sweden; Advanced Multifunctional Materials Laboratory, Department of Chemistry, Faculty of Science, Assiut University, Assiut, 71515, Egypt
| | - Jing Li
- Division of Materials and Environmental Chemistry, Stockholm University, Svante Arrhenius väg 16 C, Stockholm, SE-10691, Sweden
| | - Ulrica Edlund
- Department of Fibre and Polymer Technology, School of Engineering Sciences in Chemistry, Biotechnology, and Health, KTH Royal Institute of Technology, Teknikringen 56, Stockholm, SE-10044, Sweden.
| | - Aji P Mathew
- Division of Materials and Environmental Chemistry, Stockholm University, Svante Arrhenius väg 16 C, Stockholm, SE-10691, Sweden.
| |
Collapse
|
39
|
Yang L, Zhan Y, Gong Y, Ren E, Lan J, Guo R, Yan B, Chen S, Lin S. Development of eco-friendly CO 2-responsive cellulose nanofibril aerogels as "green" adsorbents for anionic dyes removal. JOURNAL OF HAZARDOUS MATERIALS 2021; 405:124194. [PMID: 33097347 DOI: 10.1016/j.jhazmat.2020.124194] [Citation(s) in RCA: 41] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/14/2020] [Revised: 06/16/2020] [Accepted: 10/04/2020] [Indexed: 06/11/2023]
Abstract
A novel CO2-responsive cellulose nanofibril aerogel as a "green" adsorbent derived from poly(methacrylic acid-co-2-(dimethylamino) ethyl methacrylate) and carboxylated cellulose nanofibrils was successfully prepared via stepwise cation-induced gelation and freeze drying method. This aerogel exhibited CO2-triggered adsorption behavior towards anionic dyes with a rapid adsorption rate and a high adsorption capacity, as well as satisfactory mechanical properties. Upon CO2 stimulation, the charged aerogel can selectively adsorb anionic dyes from aqueous solutions based on an electrostatic interaction. The maximum adsorption capacities of this aerogel towards methyl blue (MB), naphthol green B (NGB), and methyl orange (MO) were 598.8, 621.1 and 892.9 mg g-1, respectively, accompanied by fast adsorption equilibriums towards MB and NGB within 7 min, and MO within 12 min. Meanwhile, the adsorption isotherms and the kinetics of the CO2-responsive adsorbents followed the Freundlich isotherm and the pseudo-second-order model, respectively. Furthermore, the resulting CO2-responsive adsorbent exhibited outstanding recyclability, as its adsorption performance can still be maintained even after twenty cycles. Accordingly, the resultant CO2-responsive cellulose nanofibril aerogel could be a promising adsorbent material for the removal of anionic dyes in wastewater remediation.
Collapse
Affiliation(s)
- Lin Yang
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China
| | - Yifei Zhan
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China
| | - Yujia Gong
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China
| | - Erhui Ren
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China
| | - Jianwu Lan
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China
| | - Ronghui Guo
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China
| | - Bin Yan
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China; National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, PR China
| | - Sheng Chen
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China; National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, PR China
| | - Shaojian Lin
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, PR China; National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, PR China.
| |
Collapse
|
40
|
Yousefi N, Jones M, Bismarck A, Mautner A. Fungal chitin-glucan nanopapers with heavy metal adsorption properties for ultrafiltration of organic solvents and water. Carbohydr Polym 2021; 253:117273. [PMID: 33278945 DOI: 10.1016/j.carbpol.2020.117273] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2020] [Revised: 10/14/2020] [Accepted: 10/15/2020] [Indexed: 12/11/2022]
Abstract
Membranes and filters are essential devices, both in the laboratory for separation of media, solvent recovery, organic solvent and water filtration purposes, and in industrial scale applications, such as the removal of industrial pollutants, e.g. heavy metal ions, from water. Due to their solvent stability, biologically sourced and renewable membrane or filter materials, such as cellulose or chitin, provide a low-cost, sustainable alternative to synthetic materials for organic solvent filtration and water treatment. Here, we investigated the potential of fungal chitin nanopapers derived from A. bisporus (common white-button mushrooms) as ultrafiltration membranes for organic solvents and aqueous solutions and hybrid chitin-cellulose microfibril papers as high permeance adsorptive filters. Fungal chitin constitutes a renewable, easily isolated, and abundant alternative to crustacean chitin. It can be fashioned into solvent stable nanopapers with pore sizes of 10-12 nm, as determined by molecular weight cut-off and rejection of gold nanoparticles, that exhibit high organic solvent permeance, making them a valuable material for organic solvent filtration applications. Addition of cellulose fibres to produce chitin-cellulose hybrid papers extended membrane functionality to water treatment applications, with considerable static and dynamic copper ion adsorption capacities and high permeances that outperformed other biologically derived membranes, while being simpler to produce, naturally porous, and not requiring crosslinking. The simple nanopaper production process coupled with the remarkable filtration properties of the papers for both organic solvent filtration and water treatment applications designates them an environmentally benign alternative to traditional membrane and filter materials.
Collapse
Affiliation(s)
- Neptun Yousefi
- Institute of Materials Chemistry and Research, Polymer and Composite Engineering (PaCE) Group, Faculty of Chemistry, University of Vienna, Währinger Straße 42, 1090 Vienna, Austria
| | - Mitchell Jones
- Institute of Materials Chemistry and Research, Polymer and Composite Engineering (PaCE) Group, Faculty of Chemistry, University of Vienna, Währinger Straße 42, 1090 Vienna, Austria; School of Engineering, RMIT University, Bundoora East Campus, PO Box 71, Bundoora 3083, VIC, Australia
| | - Alexander Bismarck
- Institute of Materials Chemistry and Research, Polymer and Composite Engineering (PaCE) Group, Faculty of Chemistry, University of Vienna, Währinger Straße 42, 1090 Vienna, Austria; Department of Mechanical Engineering, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa; Department of Chemical Engineering, Imperial College London, South Kensington Campus, London, SW7 2AZ, UK
| | - Andreas Mautner
- Institute of Materials Chemistry and Research, Polymer and Composite Engineering (PaCE) Group, Faculty of Chemistry, University of Vienna, Währinger Straße 42, 1090 Vienna, Austria.
| |
Collapse
|
41
|
Yang L, Zhan Y, Yu R, Lan J, Shang J, Dou B, Liu H, Zou R, Lin S. Facile and Scalable Fabrication of Antibacterial CO 2-Responsive Cotton for Ultrafast and Controllable Removal of Anionic Dyes. ACS APPLIED MATERIALS & INTERFACES 2021; 13:2694-2709. [PMID: 33400496 DOI: 10.1021/acsami.0c19750] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
A novel CO2-responsive cotton as an eco-friendly adsorbent derived from poly(4-acryloyloxybenzophenone-co-2-(dimethylamino) ethyl methacrylate) and cotton was fabricated via a facile and fast dip-coating method. As expected, upon CO2 stimulation, the protonated cotton presented CO2-induced "on-off" selective adsorption behaviors toward anionic dyes owing to electrostatic interactions. The adsorption isotherms and kinetics of the CO2-responsive cotton toward anionic dyes obeyed the Langmuir isotherm and pseudo-second-order kinetics models, respectively. It is noteworthy that the CO2-responsive cotton exhibited high adsorption capacity and ultrafast adsorption rate toward anionic dyes with the maximum adsorption capacities of 1785.71 mg g-1 for methyl orange (MO), 1108.65 mg g-1 for methyl blue (MB), and 1315.79 mg g-1 for naphthol green B (NGB), following the adsorption equilibrium times of 5 min for MO, 3 min for MB, and 4 min for NGB. Moreover, the CO2-responsive cotton also exhibited high removal efficiency toward anionic dyes in synthetic dye effluent. Additionally, the CO2-responsive cotton could be facilely regenerated via heat treatment under mild conditions and presented stable adsorption properties even after 15 cycles. Finally, the as-prepared CO2-responsive cotton exhibited outstanding antibacterial activity against E. coli and S. aureus. In summary, this novel CO2-responsive cotton can be viewed as a promising eco-friendly adsorbent material for potential scalable application in dye-contaminated wastewater remediation.
Collapse
Affiliation(s)
- Lin Yang
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
| | - Yifei Zhan
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
| | - Ruiquan Yu
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
- National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, P.R. China
| | - Jianwu Lan
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
| | - Jiaojiao Shang
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
- National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, P.R. China
| | - Baojie Dou
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
| | - Hongyu Liu
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
| | - Rui Zou
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
| | - Shaojian Lin
- College of Biomass Science and Engineering, Sichuan University, Chengdu 610065, P.R. China
- National Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, P.R. China
| |
Collapse
|
42
|
Nour HF, E. Abdel Mageid R, Radwan EK, Khattab TA, Olson MA, El Malah T. Adsorption isotherms and kinetic studies for the removal of toxic reactive dyestuffs from contaminated water using a viologen-based covalent polymer. NEW J CHEM 2021. [DOI: 10.1039/d1nj02488d] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
A polyviologen-based adsorbent was prepared via polymerization of a viologen-dialdehyde with a hydroxyl-substituted aryl-dihydrazide in acidified water.
Collapse
Affiliation(s)
- Hany F. Nour
- National Research Centre, Photochemistry Department, Chemical Industries Research Division, 33 El Buhouth Street, P.O. Box 12622, Cairo, Egypt
| | - Randa E. Abdel Mageid
- National Research Centre, Photochemistry Department, Chemical Industries Research Division, 33 El Buhouth Street, P.O. Box 12622, Cairo, Egypt
| | - Emad K. Radwan
- National Research Centre, Water Pollution Research Department, 33 El Buhouth Street, P. O. Box 12622, Cairo, Egypt
| | - Tawfik A. Khattab
- National Research Centre, Dyeing, Printing and Auxiliaries Department, Textile Industries Research Division, 33 El Buhouth Street, P. O. Box 12622, Cairo, Egypt
| | - Mark A. Olson
- Northwestern University, Department of Chemistry, 2145 Sheridan Road, Evanston, lL 60208, USA
| | - Tamer El Malah
- National Research Centre, Photochemistry Department, Chemical Industries Research Division, 33 El Buhouth Street, P.O. Box 12622, Cairo, Egypt
| |
Collapse
|
43
|
Martins JT, Guimarães CH, Silva PM, Oliveira RL, Prediger P. Enhanced removal of basic dye using carbon nitride/graphene oxide nanocomposites as adsorbents: high performance, recycling, and mechanism. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021; 28:3386-3405. [PMID: 32918265 DOI: 10.1007/s11356-020-10779-z] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2020] [Accepted: 09/08/2020] [Indexed: 06/11/2023]
Abstract
The presence of dyes in wastewater streams poses a great challenge for sustainability and brings the need to develop technologies to treat effluent streams. Here, we propose a mixture of high superficial area carbon-based nanomaterial strategy to improve the removal of basic blue 26 (BB26) by blending porous carbon nitride (CN) and graphene oxide (GO). We prepared CN and GO pristine materials, as well the nanocomposites with mass/ratio 30/70, 50/50, and 70/30, and applied them into BB26 uptake. Nanocomposite 50/50 CN/GO was found to be the better adsorbent, and the optimization of the adsorption revealed a fast equilibrium time of 30 min, after sonication for 2 min, nanocomposite 50/50, and BB26 dye loading of 0.1 g/L and 100 mg/L, respectively. The pH variation had great influence on BB26 uptake, and at ultrapure water pH, the dye removal capacity by the composite reached 917.78 mg/g. At pH 2, a remarkable removal efficiency of 3510.10 mg/g was obtained, probably due to electrostatic interactions among protonated amine groups of the dye and negatively charged CN/GO nanocomposite. The results obtained were best fitted to the pseudo-second-order kinetic model and the Dubinin-Radushkevich isotherm. The adsorption process was thermodynamically spontaneous, and physisorption was the main mechanism, which is based on weak electrostatic and π-π interactions. The dye attached to the CN/GO nanocomposite could be removed by washing with ethyl alcohol, and the adsorbent was reused for five consecutive cycles with high BB26 uptake efficiency. The CN/GO nanocomposite ability to remove the BB26 dye was 21 times higher than those reported in the literature, indicating CN/GO composites as potential filtering materials to basic dyes.
Collapse
Affiliation(s)
- Junia Teixeira Martins
- School of Technology, University of Campinas - Unicamp, Limeira, CEP, São Paulo, 13484-332, Brazil
| | | | - Paula Mayara Silva
- School of Technology, University of Campinas - Unicamp, Limeira, CEP, São Paulo, 13484-332, Brazil
| | - Rafael L Oliveira
- Fakultät II, Institut für Chemie: Funktionsmaterialien, Sekretariat BA2, Technische Universität Berlin, Hardenbergstraße 40, 10623, Berlin, Germany
| | - Patricia Prediger
- School of Technology, University of Campinas - Unicamp, Limeira, CEP, São Paulo, 13484-332, Brazil.
| |
Collapse
|
44
|
Ao C, Zhao J, Li Q, Zhang J, Huang B, Wang Q, Gai J, Chen Z, Zhang W, Lu C. Biodegradable all-cellulose composite membranes for simultaneous oil/water separation and dye removal from water. Carbohydr Polym 2020; 250:116872. [DOI: 10.1016/j.carbpol.2020.116872] [Citation(s) in RCA: 34] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2020] [Revised: 07/26/2020] [Accepted: 07/30/2020] [Indexed: 10/23/2022]
|
45
|
Singh R, Sinha MK, Purkait MK. Stimuli responsive mixed matrix polysulfone ultrafiltration membrane for humic acid and photocatalytic dye removal applications. Sep Purif Technol 2020. [DOI: 10.1016/j.seppur.2020.117247] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
46
|
Facile one-pot in-situ synthesis of novel graphene oxide-cellulose nanocomposite for enhanced azo dye adsorption at optimized conditions. Carbohydr Polym 2020; 246:116661. [DOI: 10.1016/j.carbpol.2020.116661] [Citation(s) in RCA: 34] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2020] [Revised: 05/29/2020] [Accepted: 06/14/2020] [Indexed: 01/18/2023]
|
47
|
Mianehrow H, Lo Re G, Carosio F, Fina A, Larsson PT, Chen P, Berglund LA. Strong Reinforcement Effects in 2D Cellulose Nanofibril-Graphene Oxide (CNF-GO) Nanocomposites due to GO-Induced CNF Ordering. JOURNAL OF MATERIALS CHEMISTRY. A 2020; 8:17608-17620. [PMID: 33796318 PMCID: PMC8009442 DOI: 10.1039/d0ta04406g] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Nanocomposites from native cellulose with low 2D nanoplatelet content are of interest as sustainable materials combining functional and structural performance. Cellulose nanofibril-graphene oxide (CNF-GO) nanocomposite films are prepared by a physical mixing-drying method, with focus on low GO content, the use of very large GO platelets (2-45μm) and nanostructural characterization using synchrotron x-ray source for WAXS and SAXS. These nanocomposites can be used as transparent coatings, strong films or membranes, as gas barriers or in laminated form. CNF nanofibrils with random in-plane orientation, form a continuous non-porous matrix with GO platelets oriented in-plane. GO reinforcement mechanisms in CNF are investigated, and relationships between nanostructure and suspension rheology, mechanical properties, optical transmittance and oxygen barrier properties are investigated as a function of GO content. A much higher modulus reinforcement efficency is observed than in previous polymer-GO studies. The absolute values for modulus and ultimate strength are as high as 17 GPa and 250 MPa at a GO content as small as 0.07 vol%. The remarkable reinforcement efficiency is due to improved organization of the CNF matrix; and this GO-induced mechanism is of general interest for nanostructural tailoring of CNF-2D nanoplatelet composites.
Collapse
Affiliation(s)
- Hanieh Mianehrow
- Department of Fibre and Polymer Technology, Wallenberg Wood Science Center, KTH Royal Institute of Technology, Teknikringen 56, 100 44 Stockholm, Sweden
| | - Giada Lo Re
- Department of Fibre and Polymer Technology, Wallenberg Wood Science Center, KTH Royal Institute of Technology, Teknikringen 56, 100 44 Stockholm, Sweden
- Department of Industrial and Materials Science, Chalmers University of Technology, Rännvägen 2, 412 96 Gothenburg, Sweden
| | - Federico Carosio
- Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Alessandria Campus, Via Teresa Michel 5, 15121 Alessandria, Italy
| | - Alberto Fina
- Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Alessandria Campus, Via Teresa Michel 5, 15121 Alessandria, Italy
| | - Per Tomas Larsson
- Department of Fibre and Polymer Technology, Wallenberg Wood Science Center, KTH Royal Institute of Technology, Teknikringen 56, 100 44 Stockholm, Sweden
- RISE Bioeconomy, Drottning Kristinas Väg 61, SE-11486 Stockholm, Sweden
| | - Pan Chen
- Department of Fibre and Polymer Technology, Wallenberg Wood Science Center, KTH Royal Institute of Technology, Teknikringen 56, 100 44 Stockholm, Sweden
- Beijing Engineering Research Center of Cellulose and its Derivatives, School of Materials Science and Engineering, Beijing Institute of Technology, 5 South Zhongguancun Street, Haidian District, Beijing 100081, China
| | - Lars A Berglund
- Department of Fibre and Polymer Technology, Wallenberg Wood Science Center, KTH Royal Institute of Technology, Teknikringen 56, 100 44 Stockholm, Sweden
| |
Collapse
|
48
|
Tang H, Zhang S, Huang T, Cui F, Xing B. pH-Dependent adsorption of aromatic compounds on graphene oxide: An experimental, molecular dynamics simulation and density functional theory investigation. JOURNAL OF HAZARDOUS MATERIALS 2020; 395:122680. [PMID: 32330781 DOI: 10.1016/j.jhazmat.2020.122680] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2020] [Revised: 03/11/2020] [Accepted: 04/06/2020] [Indexed: 06/11/2023]
Abstract
This work provides a comprehensive understanding for the pH-dependent adsorption of aromatic compounds (ACs) on graphene oxide (GO). Isothermal and kinetics experiments indicated both adsorption capacity and adsorption rate were suppressed at higher pH, and the mechanisms were revealed by molecular dynamics simulations and density functional theory calculations. More specifically, π-π, hydrogen bond, vdWs, and water-mediated steric hindrance interactions were examined to reveal how pH affected the adsorption capacity, and microscopic dynamic adsorption process was captured to reveal how pH affected the adsorption rate. Results showed the reduced adsorption capacity at higher pH was mediated by increased electrostatic repulsion, weakened π-π interaction, and increased water-mediated steric hindrance. The pH-dependent behaviour of GO was responsible for the effect of pH on adsorption rate. Self-aggregation of GO at lower pH helped to capture ACs and created more favourable adsorption sites. Upon the adsorption of ACs on GO, GO/water/AC/water/GO sandwich-like structure formed, which was also mediated by solution pH. Overall, pH affects the adsorption of ACs on GO by regulating driving forces, adsorption process, and the configuration property of GOAC complex.
Collapse
Affiliation(s)
- Huan Tang
- Key Laboratory of Northwest Water Resource, Environment and Ecology, MOE, Xi'an University of Architecture and Technology, Xi'an, 710055, China; Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, China.
| | - Shuyan Zhang
- Key Laboratory of Northwest Water Resource, Environment and Ecology, MOE, Xi'an University of Architecture and Technology, Xi'an, 710055, China; Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, China
| | - Tinglin Huang
- Key Laboratory of Northwest Water Resource, Environment and Ecology, MOE, Xi'an University of Architecture and Technology, Xi'an, 710055, China; Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, China.
| | - Fuyi Cui
- College of Environment and Ecology, Chongqing University, Chongqing, 40045, China
| | - Baoshan Xing
- Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA, 01003, USA
| |
Collapse
|
49
|
Karim Z, Svedberg A, Ayub S. Role of functional groups in the production of self-assembled microfibrillated cellulose hybrid frameworks and influence on separation mechanisms of dye from aqueous medium. Int J Biol Macromol 2020; 155:1541-1552. [PMID: 31743720 DOI: 10.1016/j.ijbiomac.2019.11.131] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2019] [Revised: 10/23/2019] [Accepted: 11/15/2019] [Indexed: 11/16/2022]
Abstract
In this article, the role of surface ζ-potential, surface charge density of functional groups and available surface functional groups (-OH and -COO-) of microfibrillated cellulose (MFC) was explored in the production of self-assembled dimensional frameworks. Furthermore, 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) oxidation of MFC and in situ TEMPO functionalization of produced frameworks were performed. The effect of increased charge density of carboxylic groups (-COO-) and decrease in surface ζ-potential on binding of titanium dioxide (TiO2) and horseradish peroxidase (HRP) was investigated further. High binding of TiO2 and HRP was reported due to high density of carboxylic group (-COO-) on produced functional frameworks. Thereafter, a model water of Irgalite Violet NZ dye was targeted to understand the behavior of available functional groups and introduced surface ζ-potential of frameworks towards adsorption of dye. Possible size-exclusion of dye aggregates was also explored using neat-MFC frameworks. Photo-oxidation (TiO2) and enzymatic catalysis (HRP) were studied further and highly effective system towards dye degradation was reported. Lastly, this study has shown a well deliberated quantitative understanding of functional groups/their density responsible for the production of frameworks and separation of dye.
Collapse
Affiliation(s)
- Zoheb Karim
- MoRe Research Örnsköldsvik AB, SE-891 22 Örnsköldsvik, Sweden.
| | - Anna Svedberg
- MoRe Research Örnsköldsvik AB, SE-891 22 Örnsköldsvik, Sweden
| | - Shahanaz Ayub
- Department of Electronics and Communication Engineering, Bundelkhand Institute of Engineering and Technology (BIET), Jhansi 284128, UP, India
| |
Collapse
|
50
|
Affiliation(s)
- Andreas Mautner
- Polymer and Composite Engineering (PaCE) GroupInstitute of Materials Chemistry and Research, University of Vienna Vienna Austria
| |
Collapse
|