Degradation of antibiotics in multi-component systems with novel ternary AgBr/Ag3PO4@natural hematite heterojunction photocatalyst under simulated solar light

Advanced photocatalytic materials based degradation of micropollutants and their use in hydrogen production - a review

The use of pharmaceuticals, dyes, and pesticides in modern healthcare and agriculture, along with expanding industrialization, heavily contaminates aquatic environments. This leads to severe carcinogenic implications and critical health issues in living organisms. The photocatalytic methods provide an eco-friendly solution to mitigate the energy crisis and environmental pollution. Sunlight-driven photocatalytic wastewater treatment contributes to hydrogen production and valuable product generation. The removal of contaminants from wastewater through photocatalysis is a highly efficient method for enhancing the ecosystem and plays a crucial role in the dual-functional photocatalysis process. In this review, a wide range of catalysts are discussed, including heterojunction photocatalysts and various hybrid semiconductor photocatalysts like metal oxides, semiconductor adsorbents, and dual semiconductor photocatalysts, which are crucial in this dual function of degradation and green fuel production. The effects of micropollutants in the ecosystem, degradation efficacy of multi-component photocatalysts such as single-component, two-component, three-component, and four-component photocatalysts were discussed. Dual-functional photocatalysis stands out as an energy-efficient and cost-effective method. We have explored the challenges and difficulties associated with dual-functional photocatalysts. Multicomponent photocatalysts demonstrate superior efficiency in degrading pollutants and producing hydrogen compared to their single-component counterparts. Dual-functional photocatalysts, incorporating TiO2, g-C3N4, CeO2, metal organic frameworks (MOFs), layered double hydroxides (LDHs), and carbon quantum dots (CQDs)-based composites, exhibit remarkable performance. The future of synergistic photocatalysis envisions large-scale production facilitate integrating advanced 2D and 3D semiconductor photocatalysts, presenting a promising avenue for sustainable and efficient pollutant degradation and hydrogen production from environmental remediation technologies.

Mechanism of norfloxacin transformation by horseradish peroxidase and various redox mediated by humic acid and microplastics

The catalysis of HRP coupling with redox mediator was a feasible technology for the transformation of antibiotics. This work screened three effective redox mediators syringaldehyde (SYR), acetosyringone (AS) and p-coumaric acid (PCA) for the norfloxacin (NOR) transformation in HRP/redox mediator system. Then, compared their transformation characteristics under varying conditions. The molecular docking results indicated HRP catalytic mediator was spontaneous, and the absolute value order of free energy between three redox mediators and HRP was consistent with the order of NOR removal in experiment. The presence of humic acid (HA) and polystyrene (PS) microplastics could block the removal of NOR, and the inhibition effect was proportional to the level of HA and PS particles. Seven and six possible intermediate products were identified by using SYR/AS and PCA as redox mediators, respectively, and potential NOR transformation pathways were proposed. SYR and AS treatment had the same transformation products and pathways due to their similar structure, including defluorination, oxidation, cross-coupled with mediator, demethylation and dehydrogenation. While for the PCA group, NOR not only performed the above action (except defluorination), but also underwent decarbonylation. These findings may expand our knowledge of the conversion and fate of fluoroquinolones through HRP coupled with redox mediator in the environment.

Efficient Removal of Ciprofloxacin from Contaminated Water via Polystyrene Anion Exchange Resin with Nanoconfined Zero-Valent Iron

Ciprofloxacin (CIP), an important emerging contaminant, has been frequently detected in water, and its efficient removal has become an issue of great concern. In this study, a nanocomposite material nZVI/PA was synthesized by impregnating nanoscale zero-valent iron (nZVI) inside a millimeter-sized porous host (polystyrene-based anion exchange resin (PA)) for CIP removal. The nZVI/PA composite was characterized by field emission scanning electron microscopy coupled with energy-dispersive X-ray, transmission electron microscopy, X-ray diffraction, as well as X-ray photoelectron spectroscopy, and it was confirmed that nZVI was uniformly dispersed in PA with a small particle size. Furthermore, several key factors were investigated including initial solution pH, initial CIP concentration, co-existing ions, organic ligands, and dissolved oxygen. The experimental results indicated that the nZVI/PA composites exhibited a high removal efficiency for CIP under the conditions of initial pH 5.0, and initial CIP concentration 50 mg L^-1 at 25 °C, with the maximum removal rate of CIP reaching 98.5%. Moreover, the nZVI/PA composites exhibited high efficiency even after five cycles. Furthermore, quenching tests and electron spin resonance (ESR) confirmed that CIP degradation was attributed to hydroxyl (·OH) and superoxide radicals (⋅O2-). Finally, the main degradation products of CIP were analyzed, and degradation pathways including the hydroxylation of the quinolone ring, the cleavage of the piperazine ring, and defluorination were proposed. These results are valuable for evaluating the practical application of nZVI/PA composites for the removal of CIP and other fluoroquinolone antibiotics.

Photocatalytic degradation of cefixime using visible light-driven Z-scheme ZnO nanorod/Zn2TiO4/GO heterostructure

ZnO nanorod along with a Zn₂TiO₄/GO heterostructure with enhanced charge transfer capability was synthesized by a facile sol-gel method. FT-IR, XRD, XPS, TEM, SEM, EDX, UV-Vis DRS, photocurrent response and PL analyses were applied to characterize the as-prepared photocatalysts. To investigate the photocatalytic activity of the composite, Cefixime (CEF) removal under visible light was evaluated. The ZnO nanorod/Zn₂TiO₄/GO, including 65 wt% ZnO and 3 wt% graphene oxide, showed the highest CEF degradation and was selected as the optimal ternary composite. Reduction of electron-hole pair recombination rate, successful interfacial charge transfers, and more visible light reception in the Z-scheme system were the important reasons for improving the photocatalytic properties of ZnO nanorod/Zn₂TiO₄/GO. Effective operating parameters in the CEF photocatalytic removal process were optimized employing the response surface method and were as follows: photocatalyst dosage = 0.88 g/L, pH = 5, radiation time = 115 min, and CEF concentration = 10 ppm. The photocatalytic degradation% of CEF and total organic carbon (TOC) removal% under the optimal conditions were 71.4 and 57.5%, respectively, for the three-component composite indicating the production of intermediate species during the process. This photocatalytic reaction confirmed the first-order kinetic and using the ZnO nanorod/Zn₂TiO₄/GO composite was able to improve the reaction rate by about 2.7 and 6.2 times more than ZnO nanorod/Zn₂TiO₄ and ZnO, respectively. The effects of radiation intensity and temperature were investigated and 175 W/m² and 35 °C were obtained as optimum values. Eventually, according to the trapping test, h⁺, superoxide radical, and hydroxyl radical are the most effective active species in this photocatalytic reaction, respectively.

Sunlight-active phytol-ZnO@TiO2 nanocomposite for photocatalytic water remediation and bacterial-fouling control in aquaculture: A comprehensive study on safety-level assessment

With a growing consciousness of the importance of nature stewardship, researchers are focusing their efforts on utilizing renewable energy, particularly solar energy, to address environmental concerns. In this context, photocatalysis has long been viewed as one of the most promising cleaning methods. Hence, we have prepared a sunlight-active phytol-assisted ZnO-TiO₂ nanocomposite (PZTN) for photocatalytic bacterial deactivation and dye degradation process. The PZTN-photocatalysis effectively deactivated the bacterial pathogens as well as malachite green dye within 240 min under direct-sunlight. Moreover, this will be the first complete study on safety level assessment of photocatalytically-remediated water through toxicity studies. The obtained results evidenced that photocatalytically-deactivated bacteria and MG-dye showed to have no toxic effects, signifying that the PZTN-photocatalyzed water seems to be extremely safe for the environment. As a result of this research, we suggest that the PZTN could be a promising sunlight-active photocatalyst for environmental water treatment. On the other hand, biofouling is a ubiquitous phenomenon in the marine environment. Bacteria are the first organisms to foul surfaces and produce biofilms on man-made submerged materials. Interestingly, PZTN-coated PVC plastic-films effectively disallowed biofilms on their surface. This part of this research suggests that PZTN coated PVC-plastics are the best alternative for biofouling management.

Surface oxygen vacancies formation on Zn2SnO4 for bisphenol-A degradation under visible light: The tuning effect by peroxymonosulfate

Visible light catalysis has been widely coupled with persulfate activation for refractory pollutants removal, while the exact role of persulfate played in such composite system is still questionable. In this work, the relation between peroxymonosulfate (PMS) induced structure change and visible light responsive activity of inverse spinel: i.e., Zn₂SnO₄, was deciphered. Under the visible light illumination (λ> 420nm) PMS addition would endow the composite system with pollutant removal performance. Batch test revealed that 60% of bisphenol-A (5 mg L^-1) was mineralized within 3 h reaction time, by dosing 0.81 mM PMS and 0.1 g L^-1 catalyst. The above oxidative system was also effective for other refractory pollutants elimination. Further analysis indicated that PMS could reduce the band gap of spinel from 2.75 to 2.52 eV and thereby enabling its visible light activity. Photogenerated h⁺ induced •OH and e^- mediated •O₂^- contributed to the pollutant removal while h⁺ played a leading role. Density functional theory revealed that PMS would capture oxygen atom of spinel and induce surface oxygen vacancy defect structure formation. Also, three-oxygen atom coordinated Zn was identified as the possible catalyze site. This work is valuable for deep understanding the exact role of persulfate in photocatalytic system.

Sustainable green nanoadsorbents for remediation of pharmaceuticals from water and wastewater: A critical review

In the last three decades, pharmaceutical research has increased tremendously to offer safe and healthy life. However, the high consumption of these harmful drugs has risen devastating impact on ecosystems. Therefore, it is worldwide paramount concern to effectively clean pharmaceuticals contaminated water streams to ensure safer environment and healthier life. Nanotechnology enables to produce new, high-technical material, such as membranes, adsorbent, nano-catalysts, functional surfaces, coverages and reagents for more effective water and wastewater cleanup processes. Nevertheless, nano-sorbent materials are regarded the most appropriate treatment technology for water and wastewater because of their facile application and a large number of adsorbents. Several conventional techniques have been operational for domestic wastewater treatment but are inefficient for pharmaceuticals removal. Alternatively, adsorption techniques have played a pivotal role in water and wastewater treatment for a long, but their rise in attraction is proportional with the continuous emergence of new micropollutants in the aquatic environment and new discoveries of sustainable and low-cost adsorbents. Recently, advancements in adsorption technique for wastewater treatment through nanoadsorbents has greatly increased due to its low production cost, sustainability, better physicochemical properties and high removal performance for pharmaceuticals. Herein, this review critically evaluates the performance of sustainable green nanoadsorbent for the remediation of pharmaceutical pollutants from water. The influential sorption parameters and interaction mechanism are also discussed. Moreover, the future prospects of nanoadsorbents for the remediation of pharmaceuticals are also presented.

A new 3D 8-connected Cd(ii) MOF as a potent photocatalyst for oxytetracycline antibiotic degradation

1 exhibits the best photocatalytic decomposition efficiency towards antibiotic OXY. The plausible photocatalytic mechanism has been explained with the help of the density of states calculations and Hirshfeld surface analysis.

Synthesis of Oxygen-Rich Bismuth Oxybromide (Bi24O31Br10) Photocatalyst for High Efficiency Degradation of Sulfadiazine Under Simulated Sunlight

At present, compared with other antibiotic degradation systems, there are few literatures on pho- tocatalytic degradation of sulfadiazine (SDZ). In this research, it was firstly discovered that the oxygen-rich bismuth oxybromide (Bi₂₄O₃₁ Br₁₀) photocatalyst can efficiently degrade SDZ under simulated sunlight. In this paper, the prepared Bi₂₄O₃₁Br₁₀ photocatalyst by mixed solvothermal method represented outstanding photocatalytic performance. The catalyst synthesized at 120 °C and pH = 10 showed optimum degradation function in the samples prepared at various temperatures and pH value. After 3 h of irradiation, 96.2% of SDZ solution could be decomposed. The effects of preparation conditions, catalyst dosage, initial SDZ concentration and initial SDZ pH value on photocatalytic degradation efficiency were investigated systematically. Besides, the effect of active species was studied by trapping tests, and it was concluded that 'O₂ contributes the most to the photocatalytic process. A possible photocatalytic degradation mechanism was proposed.

An overview on non-spherical semiconductors for heterogeneous photocatalytic degradation of organic water contaminants

Because of their carcinogenicity and mutagenicity, the elimination of organic contaminants from surface and subsurface water is a subject of environmental significance. Conventional water decontamination approaches such as membrane separation, ultrafiltration, adsorption, reverse osmosis, coagulation, etc., have relatively higher operating costs and can generate highly toxic secondary contaminants. On the other hand, heterogeneous photocatalysis, an advanced oxidation process (AOP), is considered a clean and cost-effective process for organic pollutants degradation. Owing to their distinctive structure and physicochemical properties non-spherical semiconductors have gained considerable limelight in the photocatalytic degradation of organic contaminants. The current review briefly introduces a wide range of organic water contaminants. Recent advances in non-spherical semiconductor assembly and their photocatalytic degradation applications are highlighted. The underlying mechanism, fundamentals of photocatalytic reactions, and the factors affecting the degradation performance are also alluded including the current challenges and future research perspectives.

A critical review on bismuth oxyhalide based photocatalysis for pharmaceutical active compounds degradation: Modifications, reactive sites, and challenges

Pharmaceutical active compounds (PhACs), as a kind of widely used pharmaceutical drugs, has attracted much attention. The bismuth oxyhalides (BiOX)-based photocatalysis can remove PhACs efficiently due to its unique layered structure, optical and electronic properties. Nevertheless, the rapid recombination of photogenerated electron-hole pairs, and the inherent instability of structure have limited its practical application. In order to solve these problems, recent modification studies tend to focus on facet control, elemental doping, bismuth-rich strategies, defect engineering and heterojunction. Therefore, the objective of this review is to summarize the recent developments in multiply modified strategies for PhACs degradation. The synthesis methods, photocatalytic properties and the enhancement mechanism are elaborated. Besides, based on theoretical calculation, the reactive sites of typical PhACs attacked by different reactive oxygen species were also proposed. Subsequently, challenges and opportunities in applications are also featured which include factors, viz., dissolution of halogen ions, instability under visible light, applications of real water/wastewater, intermediates and byproducts toxicity analysis of BiOX-based photocatalysis. Finally, the perspectives of BiOX-based photocatalysis for PhACs photodegradation in actual water applications are highlighted.

Recent trends in advanced oxidation process-based degradation of erythromycin: Pollution status, eco-toxicity and degradation mechanism in aquatic ecosystems

Wide spread documentation of antibiotic pollution is becoming a threat to aquatic environment. Erythromycin (ERY), a macrolide belonging antibiotic is at the top of this list with its concentrations ranging between ng/L to a few μg/L in various global waterbodies giving rise to ERY-resistance genes (ERY-RGs) and ERY- resistance bacteria (ERY-RBs) posing serious threat to the aquatic organisms. ERY seems resistant to various conventional water treatments, remained intact and even increased in terms of mass loads after treatment. Enhanced oxidation potential, wide pH range, elevated selectivity, adaptability and greater efficiency makes advance oxidation processes (AOPs) top priority for degrading pollutants with aromatic rings and unsaturated bonds like ERY. In this manuscript, recent developments in AOPs for ERY degradation are reported along with the factors that affect the degradation mechanism. ERY, marked as a risk prioritized macrolide antibiotic by 2015 released European Union watch list, most probably due to its protein inhibition capability considered third most widely used antibiotic. The current review provides a complete ERY overview including the environmental entry sources, concentration in global waters, ERY status in STPs, as well as factors affecting their functionality. Along with that this study presents complete outlook regarding ERY-RGs and provides an in depth detail regarding ERY's potential threats to aquatic biota. This study helps in figuring out the best possible strategy to tackle antibiotic pollution keeping ERY as a model antibiotic because of extreme toxicity records.

Surface structure tuning of BiOCl nanosheets by the sequential introduction of oxygen vacancies, PO43- and Ag+ for boosting photodegradation of tetracycline hydrochloride

The surface structure significantly impacts the physicochemical properties of semiconductors. Constructing heterojunction is a universal approach to tune surface structure, which can effectively accelerate the charge transfer at the interface. Here, BiOCl nanosheets which occupy high ratio of surface atoms to entire atoms were used as a model photocatalyst, and a strategy was proposed to tune its surface structure by sequential introduction of oxygen vacancies, PO₄^3- and Ag⁺ on surface of BiOCl nanosheets. In order to inhibit the overgrowth of heterogeneous component, the excess PO₄^3- was timely removed by centrifugation before adding Ag⁺. As a result, the as-obtained optimal sample which was confirmed to be a composite composed of BiOCl, BiPO₄ and AgCl showed superior photocatalytic activity for tetracycline hydrochloride degradation with the rate of 38 times higher than that of pristine BiOCl, which was mainly attributed to the quick migration of photongenerated carrier. The active species h⁺ and •O₂^- played a vital role in this degradation process. Our strategy not only greatly saved investment of noble metal Ag, but also provide superior stability. On the basis of experimental results and density functional theory calculation, the visible-light driven catalytic mechanism was revealed.

Fabrication and application of a novel electrochemical biosensor based on a mesoporous carbon sphere@UiO-66-NH2/Lac complex enzyme for tetracycline detection

The overuse of tetracycline results in a threat to human, poultry and livestock health. An enzymatic electrochemical biosensor is an ideal alternative method for accurate and rapid tetracycline detection, while the unstable and easily deactivated nature of the enzyme limits its development. To overcome these limitations, a highly sensitive enzymatic electrochemical biosensor for the determination of tetracycline is developed in this work based on a complex enzyme which was constructed using a mesoporous carbon sphere@UiO-66-NH2 (MCS@UiO-66-NH2) core-shell composite with embedded laccase (Lac). Compared to pure MCS and UiO-66-NH2, the MCS@UiO-66-NH2 core-shell composite has an advantageous mesoporous structure (pore diameter >8 nm), which is suitable for the immobilization of small laccase. The biosensor based on the complex enzyme exhibits a superior activity and enhanced stability as compared with that made using a pure enzyme because the mesoporous structure of the MCS@UiO-66-NH2 composite can effectively protect the laccase against inactivation and denaturation. Besides, its high specific surface area and good conductivity are beneficial to enzyme immobilization and electron transfer in the modified electrode. The biosensor based on this complex enzyme exhibits a relatively low detection limit of 8.94 × 10-7 mol L-1 and a detection range of 1.0 × 10-6-6.0 × 10-5 mol L-1 for tetracycline detection. Furthermore, the developed biosensor possesses good long-term stability, selectivity and reproducibility, indicating its potential application for tetracycline determination in actual food. This research work provides a prospective solution to resolve the stability and inactivation problems of enzymatic electrochemical biosensors in different application scenarios.

Zinc affects the physiology and medicinal components of Dendrobium nobile Lindl

The growth of Dendrobium nobile is often influenced by zinc. Here, D. nobile was regularly sprayed with different concentrations (0, 50, 100, 200, 400, 800, 1000, 2000 μmol L^-1) of zinc to study its effect on the growth and biosynthesis of medicinal components. Samples were taken at 0, 7, 14, and 21 days to detect physiological and medicinal components. The results showed that the net photosynthetic rate, transpiration rate, stomatal conductance, and Chl A and Chl B levels of leaves first increased and then decreased as the concentration of zinc increased. At 400 μmol L^-1 concentration, these parameters reached their maximum values. Thus, a certain dose of zinc could promote the photosynthesis of D. nobile. There was an obvious increase in the synthesis of superoxide dismutase (SOD), while the content of ascorbate peroxidase and ascorbic acid (AsA) were the highest after treatment with 400 μmol L^-1 zinc. Maximum levels of polysaccharides and polyphenols were observed on day 7 and 14, respectively, at a zinc concentration of 400 μmol L^-1. These results suggest that exogenous zinc may promote the accumulation of medicinal components in D. nobile. It was also found that polysaccharides could combine well with zinc to form a polysaccharide-zinc chelate and transform inorganic zinc into organic form, which is stored in the form of polysaccharide-Zn and is known to reduce the damage induced by Zn stress.

Synthesis and visible-light photocatalytic degradation of Ag3PO4/AgBr/hydroxyapatite ternary nanocomposites prepared from oyster shells

In this paper, a new type of Ag₃PO₄/AgBr/hydroxyapatite (HAP) composite was successfully prepared from oyster shells and silver nitrate by a hydrothermal method. The samples were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, electron spin resonance and other precision instruments, and their catalytic activity was characterized by visible light degradation of methylene blue (MB). The experimental results show that the Ag₃PO₄/AgBr/HAP photocatalyst has a nanoscale rod-like structure and excellent photodegradation performance. Although the content of Ag₃PO₄ or AgBr had a significant effect on the reaction activity, the effects did not all positively correlate, and only the appropriate ratio could produce an improved catalytic effect. The catalytic performance of the 1:1-Ag₃PO₄/AgBr/HAP composite was the best: complete degradation of MB was achieved within 40 min, and the reaction rate was 15 times that of Ag₃PO₄/AgBr. In the process of photocatalytic degradation, ˙O²⁻ and h⁺ are the main active species involved in the reaction, and the synergistic catalysis of Ag₃PO₄, AgBr and HAP promotes the degradation rate.

A new type of Ag₃PO₄/AgBr/hydroxyapatite photocatalyst was prepared from oyster shells, which showed high efficiency in the degradation of organic dyes.

Regulation of biochar mediated catalytic degradation of quinolone antibiotics: Important role of environmentally persistent free radicals

Antibiotic pollution threatens aquatic ecosystems and water supplies, so analysis of ecofriendly remediation approaches like biochars with catalytic degradation abilities is a top priority. In this work, quinolone antibiotics were degraded by activating oxidants to generate transient radicals using the environmentally persistent free radicals (EPFRs) carried by biochar. The physical and chemical characterization confirmed that biochar is suitable for the removal of organic pollutants. By regulating biochar preparation parameters, it was found that EPFR generation peaked at 500 °C. As the temperature increased from 300 °C to 500 °C, the EPFRs changed from oxygen-centered radicals (g > 2.0040) to carbon-centered radicals (g < 2.0030). The catalytic degradation efficiencies of the EPFR activated oxidants from large to small were: peroxydisulfate (PDS), peroxymonosulfate (PMS), H₂O₂ and flowing O₂. The combined actions of SO₄^•- and •OH effectively degraded antibiotics. The results showed that biochar activating persulfate is a promising technique for the degradation of antibiotics.

Efficient removal of levofloxacin from different water matrices via simultaneous adsorption and photocatalysis using a magnetic Ag3PO4/rGO/CoFe2O4 catalyst

A magnetic Ag₃PO₄/rGO/CoFe₂O₄ ternary catalyst was firstly prepared and used for removing levofloxacin (LVF) from different water matrices via simultaneous adsorption and photocatalysis. Compared with Ag₃PO₄ and Ag₃PO₄/CoFe₂O₄, Ag₃PO₄/rGO/CoFe₂O₄ shows a superior adsorption-photocatalysis performance for LVF elimination since rGO component not only improves the adsorption ability but also enhances the charge separation efficiency of the catalyst. About 90.7% of LVF in distilled water (10 mg/L) was removed by the ternary catalyst after adsorption for 0.5 h and photocatalysis for 1.0 h, and the removal of LVF performed well in the pH range of 3.51-9.47. Singlet oxygen (¹O₂) was the major reactive oxygen species for LVF degradation in Ag₃PO₄/rGO/CoFe₂O₄ system under visible light, as confirmed by the quenching experiments and ESR study. Based on the detected intermediates in the photocatalytic process, the possible LVF degradation pathways were well-established. As-synthesized Ag₃PO₄/rGO/CoFe₂O₄ can also efficiently remove LVF from the different real water matrices (river water, lake water and secondary effluent) via simultaneous adsorption and photocatalysis. Moreover, magnetic Ag₃PO₄/rGO/CoFe₂O₄ can be easily recovered and effectively reused for the removal of LVF in actual water bodies.

Rational Design of W-Doped Ag3PO4 as an Efficient Antibacterial Agent and Photocatalyst for Organic Pollutant Degradation

Bacterial and organic pollutants are major problems with potential adverse impacts on human health and the environment. A promising strategy to alleviate these impacts consists in designing innovative photocatalysts with a wider spectrum of application. In this paper, we report the improved photocatalytic and antibacterial activities of chemically precipitated Ag3PO4 microcrystals by the incorporation of W at doping levels 0.5, 1, and 2 mol %. The presence of W directly influences the crystallization of Ag3PO4, affecting the morphology, particle size, and surface area of the microcrystals. Also, the characterization via experimental and theoretical approaches evidenced a high density of disordered [AgO4], [PO4], and [WO4] structural clusters due to the substitution of P5+ by W6+ into the Ag3PO4 lattice. This leads to new defect-related energy states, which decreases the band gap energy of the materials (from 2.27 to 2.04 eV) and delays the recombination of e'-h• pairs, leading to an enhanced degradation process. As a result of such behaviors, W-doped Ag3PO4 (Ag3PO4:W) is a better visible-light photocatalyst than Ag3PO4, demonstrated here by the photodegradation of potential environmental pollutants. The degradation of rhodamine B dye was 100% in 4 min for Ag3PO4:W 1%, and for Ag3PO4, the obtained result was 90% of degradation in 15 min of reaction. Ag3PO4:W 1% allowed the total degradation of cephalexin antibiotic in only 4 min, whereas pure Ag3PO4 took 20 min to achieve the same result. For the degradation of imidacloprid insecticide, Ag3PO4:W 1% allowed 90% of degradation, whereas Ag3PO4 allowed 40%, both in 20 min of reaction. Moreover, the presence of W-dopant results in a 16-fold improvement of bactericidal performance against methicillin-resistant Staphylococcus aureus. The outstanding results using the Ag3PO4:W material demonstrated its potential multifunctionality for the control of organic pollutants and bacteria in environmental applications.

Enhanced heterogeneous catalytic ozonation of pharmaceutical pollutants using a novel nanostructure of iron-based mineral prepared via plasma technology: A comparative study

Plasma-treated goethite nanoparticles with high surface area and improved density of surface hydroxyl groups were synthesized from natural goethite (NG) using Argon (PTG-Ar) and Nitrogen (PTG-N₂) as plasma environment to enhance the performance of heterogeneous catalytic ozonation process. Synthesized samples were characterized by FESEM, EDX, TEM, XRD, XPS, BET-BJH, FTIR, AAS and pH_PZC. Results indicated a significantly different morphology for the prepared samples with negligible change in crystal structure. Furthermore, the catalytic activity and synergy factor of the NG and PTG nanocatalysts were evaluated for degradation and mineralization of Sulfasalazine antibiotic (SSZ) as an environmental hazardous contaminant. The highest removal efficiency was achieved 96.05 % under the optimal operating conditions. The kinetic study confirmed the pseudo-first-order reaction for the degradation process. Moreover, the dissolved ozone concentration and effect of organic and inorganic salts were studied in order to assess the reactive oxidant species (ROSs) and catalyst active sites in the process. The mechanism investigation showed the catalytic ozonation of SSZ was mainly performed by successive attacks of hydroxyl radicals (•OH), superoxide radicals (O₂^-) and direct ozone molecules. Environmentally-friendly modification of the NG, negligible iron leaching, successive reusability and superior catalytic activity are the major benefits of the PTG nanoparticles.

Luminescent lanthanide metal-organic framework test strip for immediate detection of tetracycline antibiotics in water

Tetracycline antibiotics (TCs) are a kind of commonly used antibiotics for treating infections, however, the overuse of TCs has adversely affected human health and the ecosystem. Thus, detection of TCs in water is important but challenging. In this work, a luminescent lanthanide metal-organic framework (LnMOF) sensor (1) for immediate detection of oxytetracycline (OTC) and tetracycline (TC) is developed. The sensor has high acid-base and water stability. Investigation reveals that among the 27 species of antibiotics, anions and cations under investigation, 1 shows highly selective sensing towards OTC and TC, and the detection is not disturbed by the presence of other species. The limit of detection (LOD) for OTC and TC are ultra-sensitive value of 1.95 and 2.77 nM, respectively. Investigation reveals the sensing mechanism is due to the inner filter effect. Further studies reveal that the sensor can be used in real sample monitoring. More importantly, test strips based on 1 are manufactured. They are an easy-to-use, low-cost, highly selective and sensitive sensing device for detecting OTC and TC. The sensing can be distinguished immediately and easily by the naked eyes, making it an excellent candidate to monitor OTC and TC in real use.

Silver-loaded In2S3-CdIn2S4@X(X=Ag, Ag3PO4, AgI) ternary heterostructure nanotubes treated by electron beam irradiation with enhanced photocatalytic activity

Ternary heterostructure nanotubes of In₂S₃-CdIn₂S₄@X(X = Ag, Ag₃PO₄, AgI) were synthesized with enhanced photocatalytic activity for efficiently degrading pollutants. Electron beam irradiation was employed to artificially introduce interface defects to the heterostructure nanotubes. The experimental results for degrading carmine and Cr⁶⁺ under visible light irradiation showed that the photocatalytic efficiency of In₂S₃-CdIn₂S₄ was improved to some extent by the introduction of silver compounds. DRS results confirmed that the band gaps of In₂S₃-CdIn₂S₄ were reduced to 1.62 eV and 1.58 eV by introducing Ag₃PO₄ and AgI, respectively. Interestingly, the band gap of In₂S₃-CdIn₂S₄@AgI after electron beam irradiation was further reduced to 1.56 eV, resulting in that the degradation time of both Cr⁶⁺ and carmine by In₂S₃-CdIn₂S₄@AgI after high-energy electron beam irradiation was shortened to only 5 min. The XRD spectra of the photocatalysts after five cycles could maintain the original crystal form to a large extent. The OH stretching vibration peaks of In₂S₃-CdIn₂S₄@AgI after electron beam irradiation at 3387 cm^-1 became wider and sharper, thus indicating that the number of free hydroxyl groups on the heterostructure surface significantly increased. PL results showed that electron beam irradiation could significantly reduce the PL emission peak and enhance the utilization of photogenerated charge carriers. EIS results further confirmed that In₂S₃-CdIn₂S₄@AgI processed by electron beam irradiation had higher photogenerated electron-hole separation efficiency. Based on the experimental results, a feasible reaction pathway and photocatalytic mechanism for the degradation of carmine was investigated. ESR results showed that the main active groups in the whole photocatalytic system were •O₂^- and h⁺.

Defining and combating antibiotic resistance from One Health and Global Health perspectives

Several interconnected human, animal and environmental habitats can contribute to the emergence, evolution and spread of antibiotic resistance, and the health of these contiguous habitats (the focus of the One Health approach) may represent a risk to human health. Additionally, the expansion of resistant clones and antibiotic resistance determinants among human-associated, animal-associated and environmental microbiomes have the potential to alter bacterial population genetics at local and global levels, thereby modifying the structure, and eventually the productivity, of microbiomes where antibiotic-resistant bacteria can expand. Conversely, any change in these habitats (including pollution by antibiotics or by antibiotic-resistant organisms) may influence the structures of their associated bacterial populations, which might affect the spread of antibiotic resistance to, and among, the above-mentioned microbiomes. Besides local transmission among connected habitats-the focus of studies under the One Health concept-the transmission of resistant microorganisms might occur on a broader (even worldwide) scale, requiring coordinated Global Health actions. This Review provides updated information on the elements involved in the evolution and spread of antibiotic resistance at local and global levels, and proposes studies to be performed and strategies to be followed that may help reduce the burden of antibiotic resistance as well as its impact on human and planetary health.

Carbon dots sensitized 2D-2D heterojunction of BiVO4/Bi3TaO7 for visible light photocatalytic removal towards the broad-spectrum antibiotics

Focused on the removal of the complicated residual antibiotic in aqueous environment, in this work, a novel carbon dots (C-dots) sensitized 2D-2D heterojunction of BiVO₄/Bi₃TaO₇ were assembled through a simple hydrothermal process. The characteristic by TEM, SEM, and XPS confirmed C-dots evenly anchored on the surface of BiVO₄/Bi₃TaO₇ heterojunction. The as-prepared C-dots/BiVO₄/Bi₃TaO₇ showed superior performance for the degradation of the various antibiotics under visible light illumination. When the concentration of C-dots in the composite is 3 wt.%, the photodegraded rates are obtained to be 91.7%, 89.3%, 87.1%, for tetracycline (TC), amoxicillin (AMX) and ciprofloxacin (CIP), respectively, without significant deactivation during consecutive ten recycle experiments. Furthermore, by assessing the antibiotics mixture solution of TC, AMX and CIP, it is proposed that the prepared samples are potentially effective for the wastewater effluents. A probable mechanism was reasonably proposed. The improved photocatalytic activities could be attributed to the unique construction of the C-dots mediated heterojunction, which could expedite electron migration, improve light harvesting capacity and enhance charge separation efficiency. The present investigation may provide a new perspective to design C-dots mediated heterojunction which could be a potential visible-light-driven photocatalysts for the better practical applications in remediation of broad-spectrum antibiotic residues.

Decorating Ag3PO4 nanodots on mesoporous silica-functionalized NaYF4:Yb,Tm@NaLuF4 for efficient sunlight-driven photocatalysis: synergy of broad spectrum absorption and pollutant adsorption-enrichment

A broad-spectrum photocatalyst with pollutant-adsorption capability was synthesized by decorating silver orthophosphate nanodots on mesoporous silica-functionalized upconversion nanoparticles for efficient natural sunlight-driven photocatalysis.

Key role of hydrochar in heterogeneous photocatalytic degradation of sulfamethoxazole using Ag3PO4-based photocatalysts

To overcome the practical application limitations of Ag₃PO₄ such as photocorrosion and relatively low efficiency of photogenerated carrier seperation, Ag₃PO₄ particles were loaded onto hydrochar. The particles in the composite had a smaller crystallite size and different phase structure with more edges than pure Ag₃PO₄ particles. The as-prepared composite catalyst exhibited a different photocatalytic performance for sulfamethoxazole (SMX) degradation when varying the mass ratio of hydrochar and Ag₃PO₄. In addition to higher SMX degradation efficiency, the composite exhibited much higher TOC degradation efficiency, recycling stability, and less-toxic intermediate production. The composites enhanced visible light response, and accelerated electron transfer and photogenerated carrier separation as well. The addition of H₂O₂ to the photocatalytic system enhanced the photocatalytic activity of the composite catalyst. According to a mechanistic examination, the hole (h⁺) is the dominant reactive species for SMX degradation. This study provides new insight into high-efficiency, low cost, and easily prepared photocatalysts for pollution removal from water.

To overcome the practical application limitations of Ag₃PO₄ such as photocorrosion and relatively low efficiency of photogenerated carrier seperation, Ag₃PO₄ particles were loaded onto hydrochar.