Metal and organic pollutants bioremediation by extremophile microorganisms

Leveraging Antarctic psychrotolerant fungi for PAH biodegradation, unveiling key factors influencing the process

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants, detected even in remote regions such as the Antarctic, Arctic, and Tibetan Plateau. Thus, understanding their biodegradation processes at low temperatures is crucial. Therefore, the potential of fungal strains from the Antarctic to biodegrade PAHs was explored. Experiments were performed in a nutrient medium with 100 mg.L-1 PAH, from 0 to 42 days at 120 rpm and 10-20 °C. Among the nine fungal strains assessed, eight demonstrated a statistically significant reduction in residual anthracene concentration (ranging from 58.1 to 92.9 mg.L-1) compared to the killed-cell control (102.4 ± 4.7 mg.L-1). Furthermore, the most efficient strain, Schizophyllum sp. LAMAI 2452, achieved a greater reduction in residual anthracene concentration compared to a consortium of six filamentous strains. Experimental design indicated that higher temperatures (20 °C) significantly enhanced the biodegradation efficiency of the best-performing strain and a consortium of three yeasts. In contrast, the consortium of six filamentous strains performed optimally at lower temperatures (10 °C), whereas pH levels did not significantly affect the biodegradation process. The assessed consortium biodegraded all the evaluated PAHs (anthrone, anthraquinone, acenaphthene, acenaphthylene, acenaphthenol, phenanthrene, and pyrene), and oxygenated and nitrogenated derivatives were identified as metabolites, contributing to a better understanding of the fate of these compounds. In summary, these biocatalysts effectively biodegraded different PAHs, providing insights into PAH degradation in extreme environments like Antarctica, while also opening avenues for discovering new biocatalysts for low-temperature processes.

Fungi from Antarctic marine sediment: characterization and assessment for textile dye decolorization and detoxification

Cold-adapted microorganisms can produce enzymes with activity at low and mild temperatures, which can be applied to environmental biotechnology. This study aimed to characterize 20 Antarctic fungi to identify their genus (ITS rDNA marker) and growth temperatures and evaluate their ability to decolorize and detoxify the textile dye indigo carmine (IC). An individual screening was performed to assess the decolorization and detoxification of IC by the isolates, as well as in consortia with other fungi. The isolates were affiliated with seven ascomycete genera: Aspergillus (n = 4), Cosmospora (n = 2), Leuconeurospora (n = 2), Penicillium (n = 3), Pseudogymnoascus (n = 6), Thelebolus (n = 2), and Trichoderma (n = 1). The two isolates from the genus Leuconeurospora were characterized as psychrophilic, while the others were psychrotolerant. The Penicillium isolates were able to decolorize between 60 and 82% of IC. The isolates identified as Pseudogymnoascus showed the best detoxification capacity, with results varying from 49 to 74%. The consortium using only Antarctic ascomycetes (C1) showed 45% of decolorization, while the consortia with the addition of basidiomycetes (C1 + Peniophora and C1 + Pholiota) showed 40% and 50%, respectively. The consortia C1 with the addition of the basidiomycetes presented a lower toxicity after the treatments. In addition, a higher fungal biomass was produced in the presence of dye when compared with the experiment without the dye, which can be indicative of dye metabolization. The results highlight the potential of marine-derived Antarctic fungi in the process of textile dye degradation. The findings encourage further studies to elucidate the degradation and detoxification pathways of the dye IC by these fungal isolates.

Response of bacterial communities in desert grassland soil profiles to acid mine drainage pollution

Acid mine drainage (AMD) causes serious environmental pollution, which imposes stresses on soil ecosystems. Therefore, it is critical to study the responses of soil bacterial communities to AMD pollution in ecologically fragile desert grasslands. Here, the bacterial community composition, structure, and assembly processes in vertical soil profiles of an AMD contaminated desert grassland were explored using 16S rRNA high-throughput sequencing. The results showed that the surface layers of the profiles exhibited lower pH and higher heavy metals (HMs) content due to AMD influence. The AMD contamination led to reduced bacterial diversity in the surface soil layer of the profiles and significantly changed the bacterial community composition and structure. Gradients in pH, TK, TN, and HMs were the main factors driving bacterial community variability. In contrast to the uncontaminated profile, deterministic processes were important in shaping soil bacterial community in the AMD contaminated profiles. These findings will enhance understanding about the responses of soil bacteria in desert grassland soil to the environmental changes caused by AMD contamination and will improve the remediation of AMD contaminated soil.

Unveiling the Bioleaching Versatility of Acidithiobacillus ferrooxidans

Acidithiobacillus ferrooxidans is a Gram-negative bacterium that thrives in extreme acidic conditions. It has emerged as a key player in biomining and bioleaching technologies thanks to its unique ability to mobilize a wide spectrum of elements, such as Li, P, V, Cr, Fe, Ni, Cu, Zn, Ga, As, Mo, W, Pb, U, and its role in ferrous iron oxidation and reduction. A. ferrooxidans catalyzes the extraction of elements by generating iron (III) ions in oxic conditions, which are able to react with metal sulfides. This review explores the bacterium's versatility in metal and elemental mobilization, with a focus on the mechanisms involved, encompassing its role in the recovery of industrially relevant elements from ores. The application of biomining technologies leveraging the bacterium's natural capabilities not only enhances element recovery efficiency, but also reduces reliance on conventional energy-intensive methods, aligning with the global trend towards more sustainable mining practices. However, its use in biometallurgical applications poses environmental issues through its effect on the pH levels in bioleaching systems, which produce acid mine drainage in rivers and lakes adjacent to mines. This dual effect underscores its potential to shape the future of responsible mining practices, including potentially in space, and highlights the importance of monitoring acidic releases in the environment.

Effects of nitrile compounds on the structure and function of soil microbial communities as revealed by metagenomes

The proliferation of nitrile mixtures has significantly exacerbated environmental pollution. This study employed metagenomic analysis to investigate the short-term effects of nitrile mixtures on soil microbial communities and their metabolic functions. It also examined the responses of indigenous microorganisms and their functional metabolic genes across various land use types to different nitrile stressors. The nitrile compound treatments in this study resulted in an increase in the abundance of Proteobacteria, Actinobacteria, and Firmicutes, while simultaneously reducing overall microbial diversity. The key genes involved in the denitrification process, namely, nirK, nosZ, and hao, were down-regulated, and NO3--N, NO2--N, and NH4+-N concentrations decreased by 7.7%-12.3%, 11.1%-21.3%, and 11.3%-30.9%, respectively. Notably, pond sludge samples exhibited a significant increase in the abundance of nitrogen fixation-related genes nifH, vnfK, vnfH, and vnfG following exposure to nitrile compounds. Furthermore, the fumarase gene fumD, which is responsible for catalyzing fumaric acid into malic acid in the tricarboxylic acid cycle, showed a substantial increase of 7.2-10.6-fold upon nitrile addition. Enzyme genes associated with the catechol pathway, including benB-xylY, dmpB, dmpC, dmpH, and mhpD, displayed increased abundance, whereas genes related to the benzoyl-coenzyme A pathway, such as bcrA, dch, had, oah, and gcdA, were notably reduced. In summary, complex nitrile compounds were found to significantly reduce the species diversity of soil microorganisms. Nitrile-tolerant microorganisms demonstrated the ability to degrade and adapt to nitrile pollutants by enhancing functional enzymes involved in the catechol pathway and fenugreek conversion pathway. This study offers insights into the specific responses of microorganisms to compound nitrile contamination, as well as valuable information for screening nitrile-degrading microorganisms and identifying nitrile metabolic enzymes.

A comprehensive assessment of heavy metals, VOCs and petroleum hydrocarbon in different soil layers and groundwater at an abandoned Al/Cu industrial site

Compound pollution at industrial sites impedes urban development, especially when there is a lack of understanding about the spatial variations of internal pollution in industrial areas producing light-weight materials. In this study, spatial distribution and ecological risks of potentially toxic elements (PTEs), volatile organic compounds (VOCs), and petroleum hydrocarbons (C10-40) in the soil and groundwater of an Al/Cu (aluminum/copper) industrial site have been analyzed comprehensively. Results revealed the progressive clustering of pollutants in different soil layers, which indicated varying levels of penetration and migration of pollutants from the surface downward. Furthermore, severity of pollution varied according to pollutant type, with Cu (5-10,228 mg kg-1) often exceeding the background levels significantly (>40). Cd (0.03-2.60 mg kg-1) and Hg (0.01-3.73 mg kg-1) were found at elevated concentrations in deeper soil layers, suggesting distinct variations of PTEs across different soil depths. Among the more hazardous VOCS, polychlorinated biphenyls (1.80-234 μg kg-1) were particularly prevalent in the deeper layers of soil. Petroleum hydrocarbons (C10-40) were widely detected (6-582 mg kg-1), showing significant migration potential from surface to deep soil. These findings suggest that prolonged industrial activities lead to deep-seated accumulation of pollutants, which also impacts the groundwater, contributing to long-term dispersion of contaminants. Furthermore, multivariate statistical analysis indicated certain positive correlations among the distribution of Cu, Pb and petroleum hydrocarbons, indicating possible coupling of these pollutants. Severe Cu pollution caused an ecological risk in the surface soil layer (covering >20 % area of high pollution site, contributing >40 % ecological risk). While the Hg and Cd posed significant risks in the deeper soil layers, showing higher risk coefficients and mobility. The study provides crucial insights into the transformation of urban areas with a history of industrial uses into community spaces and highlights the risks posed by the remaining pollutants.

Exploring Extremotolerant and Extremophilic Microalgae: New Frontiers in Sustainable Biotechnological Applications

Exploring extremotolerant and extremophilic microalgae opens new frontiers in sustainable biotechnological applications. These microorganisms thrive in extreme environments and exhibit specialized metabolic pathways, making them valuable for various industries. The study focuses on the ecological adaptation and biotechnological potential of these microalgae, highlighting their ability to produce bioactive compounds under stress conditions. The literature reveals that extremophilic microalgae can significantly enhance biomass production, reduce contamination risks in large-scale systems, and produce valuable biomolecules such as carotenoids, lipids, and proteins. These insights suggest that extremophilic microalgae have promising applications in food, pharmaceutical, cosmetic, and biofuel industries, offering sustainable and efficient alternatives to traditional resources. The review concludes that further exploration and utilization of these unique microorganisms can lead to innovative and environmentally friendly solutions in biotechnology.

Insights into the characteristics of changes in dissolved organic matter fluorescence components on the natural attenuation process of toluene

Natural attenuation (NA) is of great significance for the remediation of contaminated groundwater, and how to identify NA patterns of toluene in aquifers more quickly and effectively poses an urgent challenge. In this study, the NA of toluene in two typical soils was conducted by means of soil column experiment. Based on column experiments, dissolved organic matter (DOM) was rapidly identified using fluorescence spectroscopy, and the relationship between DOM and the NA of toluene was established through structural equation modeling analysis. The adsorption rates of toluene in clay and sandy soil were 39 % and 26 %, respectively. The adsorption capacity and total NA capacity of silty clay were large. The occurrence of fluorescence peaks of protein-like components and specific products indicated the occurrence of biodegradation. Arenimonas, Acidovorax and Brevundimonas were the main degrading bacteria identified in Column A, while Pseudomonas, Azotobacter and Mycobacterium were the main ones identified in Column B. The pH, ORP, and Fe(II) were the most important factors affecting the composition of microbial communities, which in turn affected the NA of toluene. These results provide a new way to quickly identify NA of toluene.

Potential of halophiles and alkaliphiles in bioremediation of azo dyes-laden textile wastewater: a review

Azo dye-laden textile wastewater must be treated before release due to various health and environmental concerns. Bioremediation of textile wastewater, however, is a challenge owing to its alkaline and saline nature as mesophilic microbes, in general, are either not able to thrive or show less efficiency under such hostile environment. Thus, pre-treatment for neutralization or salinity removal becomes a prerequisite before applying microbes for treatment, causing extra economical and technical burden. Extremophilic bacteria can be the promising bioremediating tool because of their inherent ability to survive and show toxicants removal capability under such extreme conditions without need of pre-treatment. Among extremophiles, halophilic and alkaliphilic bacteria which are naturally adapted to high salt and pH are of special interest for the decolorization of saline-alkaline-rich textile wastewater. The current review article is an attempt to provide an overview of the bioremediation of azo dyes and azo dye-laden textile wastewater using these two classes of extremophilic bacteria. The harmful effects of azo dyes on human health and environment have been discussed herein. Halo-alkaliphilic bacteria circumvent the extreme conditions by various adaptations, e.g., production of certain enzymes, adjustment at the protein level, pH homeostasis, and other structural adaptations that have been highlighted in this review. The unique properties of alkaliphiles and halophiles, to not only sustain but also harboring high dye removal competence at high pH and salt concentration, make them a good candidate for designing future bioremediation strategies for the management of alkaline, salt, and azo dye-laden industrial wastewaters.

NGS-Based Metagenomics Depicting Taxonomic and Functional Insights into North-Western Himalayan Hot Springs

Hot springs have tremendous significance due to their divulging physiochemical features. In the recent past, metagenomics has emerged as a unique methodology to explore microbiota as well as new biocatalysts possessing advantageous biochemical properties from hot springs. In the present study, metagenomics has been employed for microbial diversity exploration and identification of genes involved in various metabolic pathways among two hot springs, Manikaran and Tatapani, located in Himachal Pradesh, India. Taxonomic analysis of both metagenomes revealed the dominance of the Proteobacteria phylum. Genomic signatures of other bacterial phyla such as Chloroflexi, Actinobacteria, Bacteroidetes, Cyanobacteria, Planctomycetes, and Firmicutes were also found in significant abundance in both the metagenomes. The abundance of microorganisms belonging to genera, especially Nitrospira, Thauera, Meiothermus, Thiobacillus, Massilia, and Anaerolinea, was reported to be prevalent in the hot springs. A significant amount of metagenomic data remained taxonomically unclassified, which indeed emphasizes the scientific importance of these thermoaquatic niches. The functional potential analysis of both metagenomes revealed pathways related to carbohydrate metabolism, followed by amino acid metabolism, energy metabolism, genetic information processing, metabolism of cofactors and vitamins, membrane transporter, and signal transduction. Exploration of biomass-modifying biocatalysts enumerated the presence of glycoside hydrolases, glycosyl transferases, polysaccharide lyases, and carbohydrate esterases in the metagenomic data. Together, these findings offer an in-depth understanding of the microbial inhabitants in North-Western Himalayan hot springs and their underlying potential for various biotechnological and industrial applications.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-024-01248-z.

Ecotoxicological risk assessment on coagulation-flocculation in water/wastewater treatment: a systematic review

It is undeniable that removal efficiency is the main factor in coagulation-flocculation (C-F) process for wastewater treatment. However, as far as environmental safety is concerned, the ecotoxicological aspect of the C-F process needs to be examined further. In this study, a systematic review was performed based on publications related to the toxicity research in C-F technology for wastewater treatment. Through a series of screening steps, available toxicity studies were categorized into four themes, namely acute toxicity, phytotoxicity, cytotoxicity, and genotoxicity, which comprised 48 articles. A compilation of the methodologies executed for each theme was also outlined. The findings show that conventional metallic coagulants (e.g., alum, iron chloride, and iron sulfate) were less toxic when tested on test species such as Daphnia magna (water flea), Lattuca sativa (lettuce), and animal cells compared to synthetic polymers. Natural coagulants such as chitosan or Moringa oleifera were less toxic compared to metallic coagulants; however, inconsistent results were observed. Moreover, an advanced C-F (electrocoagulation) as well as integration between C-F and Fenton, adsorption, and photocatalytic does not significantly change the toxicological profile of the system. It was found that diverse coagulants and flocculants, species sensitivity, complexity in toxicity testing, and dynamic environmental conditions were some key challenges faced in this field. Finally, it was expected that advances in technology, interdisciplinary collaboration, and a growing awareness of environmental sustainability will drive efforts to develop more effective and eco-friendly coagulants and flocculants, improve toxicity testing methodologies, and enhance the overall efficiency and safety of water and wastewater treatment processes.

The complete degradation of 1,2-dichloroethane in Escherichia coli by metabolic engineering

1,2-Dichloroethane (1,2-DCA), a widely utilized chemical intermediate and organic solvent in industry, frequently enters the environment due to accidental leaks and mishandling during application processes. Thus, the in-situ remediation of contaminated sites has become increasingly urgent. However, traditional remediation methods are inefficient and costly, while bioremediation presents a green, efficient, and non-secondary polluting alternative. In this study, an engineered strain capable of completely degrading 1,2-DCA was constructed. We introduced six exogenous genes of the 1,2-DCA degradation pathway into E. coli and confirmed their normal transcription and efficient expression in this engineered strain through qRT-PCR and proteomics. The degradation experiments showed that the strain completely degraded 2 mM 1,2-DCA within 12 h. Furthermore, the results of isotope tracing verified that the final degradation product, malic acid, entered the tricarboxylic acid cycle (TCA) of E. coli and was ultimately fully metabolized. Also, morphological changes in the engineered strain and control strain exposed to 1,2-DCA were observed under SEM, and the results revealed that the engineered strain is more tolerant to 1,2-DCA than the control strain. In conclusion, this study paved a new way for humanity to deal with the increasingly complex environmental challenges.

Microcosm study reveals the microbial and environmental effects on tributyltin degradation in an estuarine sediment

Tributyltin (TBT) is one of the most harmful contaminants ever released into the aquatic environment. Despite being banned, it is still present at many locations throughout the world. Its degradation in sediment mainly occurs through microbial biodegradation, a process that remains unclear. This study therefore aimed at better understanding TBT biodegradation in estuarine sediment and the microbial community associated with it. Microcosm experiments were set up, embracing a range of environmental control parameters. Major community shifts were recorded, mainly attributed to the change in oxygen status. The highest percentage of degradation (36,8%) occurred at 4 °C in anaerobic conditions. These results are encouraging for the in-situ bioremediation of TBT contaminated muddy sediment in temperate ports worldwide. However, with TBT able to persist in the coastal environment for decades when undisturbed in anoxic sediment, further research is needed to fully understand the mechanisms that triggered this biodegradation observed in the microcosms.

Fungal biomineralization of toxic metals accelerates organic pollutant removal

Fungal biomineralization plays an important role in the biogeochemical cycling of metals in the environment and has been extensively explored for bioremediation and element biorecovery. However, the cellular and metabolic responses of fungi in the presence of toxic metals during biomineralization and their impact on organic matter transformations are unclear. This is an important question because co-contamination by toxic metals and organic pollutants is a common phenomenon in the natural environment. In this research, the biomineralization process and oxidative stress response of the geoactive soil fungus Aspergillus niger were investigated in the presence of toxic metals (Co, Cu, Mn, and Fe) and the azo dye orange II (AO II). We have found that the co-existence of toxic metals and AO II not only enhanced the fungal biomineralization of toxic metals but also accelerated the removal of AO II. We hypothesize that the fungus and in situ mycogenic biominerals (toxic metal oxalates) constituted a quasi-bioreactor, where the biominerals removed organic pollutants by catalyzing reactive oxygen species (ROS) generation resulting from oxidative stress. We have therefore demonstrated that a fungal/biomineral system can successfully achieve the goal of toxic metal immobilization and organic pollutant decomposition. Such findings inform the potential development of fungal-biomineral hybrid systems for mixed pollutant bioremediation as well as provide further understanding of fungal organic-inorganic pollutant transformations in the environment and their importance in biogeochemical cycles.

Effects of Graphene Oxide on Endophytic Bacteria Population Characteristics in Plants from Soils Contaminated by Polycyclic Aromatic Hydrocarbons

Environmental pollution stands as one of the significant global challenges we face today. Polycyclic aromatic hydrocarbons (PAHs), a class of stubborn organic pollutants, have long been a focal point of bioremediation research. This study aims to explore the impact and mechanisms of graphene oxide (GO) on the phytoremediation effectiveness of PAHs. The results underscore the significant efficacy of GO in accelerating the degradation of PAHs. Additionally, the introduction of GO altered the diversity and community structure of endophytic bacteria within the roots, particularly those genera with potential for PAH degradation. Through LEfSe analysis and correlation studies, we identified specific symbiotic bacteria, such as Mycobacterium, Microbacterium, Flavobacterium, Sphingomonas, Devosia, Bacillus, and Streptomyces, which coexist and interact under the influence of GO, synergistically degrading PAHs. These bacteria may serve as key biological markers in the PAH degradation process. These findings provide new theoretical and practical foundations for the application of nanomaterials in plant-based remediation of polluted soils and showcase the immense potential of plant-microbe interactions in environmental restoration.

Microbial remediation of petroleum-contaminated soil focused on the mechanism and microbial response: a review

The environmental pollution caused by petroleum hydrocarbons has received considerable attention in recent years. Microbial remediation has emerged as the preferred method for the degradation of petroleum hydrocarbons, which is experiencing rapid development driven by advancements in molecular biology. Herein, the capacity of different microorganisms used for crude oil bioremediation was reviewed. Moreover, factors influencing the effectiveness of microbial remediation were discussed. Microbial remediation methods, such as bioaugmentation, biostimulation, and bioventilation, are summarized in this review. Aerobic and anaerobic degradation mechanisms were reviewed to elucidate the metabolic pathways involved. The impacts of petroleum hydrocarbons on microorganisms and the environment were also revealed. A brief overview of synthetic biology and a unique perspective of technique combinations were presented to provide insight into research trends. The challenges and future outlook were also presented to stimulate contemplation of the mechanisms involved and the development of innovative techniques.

Biotransformation of the azo dye reactive orange 16 by Aspergillus flavus A5P1: Performance, genetic background, pathway, and mechanism

This study reports the strain Aspergillus flavus A5P1 (A5P1), which is with the capable of degrading the azo dye reactive orange 16 (RO16). The mechanism of RO16 degradation by A5P1 was elucidated through genomic analysis, enzymatic analysis, degradation pathway analysis and oxidative stress analysis. Strain A5P1 exhibited aerobic degradation of RO16, with optimal degradation at an initial pH of 3.0. Genomic analysis indicates that strain A5P1 possesses the potential for acid tolerance and degradation of azo dye. Enzymatic analysis, combined with degradation product analysis, demonstrated that extracellular laccase, intracellular lignin peroxidase, and intracellular quinone reductase were likely key enzymes in the RO16 degradation process. Oxidative stress analysis revealed that cell stress responses may participate in the RO16 biotransformation process. The results indicated that the biotransformation of RO16 may involves biological processes such as transmembrane transport of RO16, cometabolism of the strain with RO16, and cell stress responses. These findings shed light on the biodegradation of RO16 by A5P1, indicating A5P1's potential for environmental remediation.

Potential applications of extremophilic bacteria in the bioremediation of extreme environments contaminated with heavy metals

Protecting the environment from harmful pollutants has become increasingly difficult in recent decades. The presence of heavy metal (HM) pollution poses a serious environmental hazard that requires intricate attention on a worldwide scale. Even at low concentrations, HMs have the potential to induce deleterious health effects in both humans and other living organisms. Therefore, various strategies have been proposed to address this issue, with extremophiles being a promising solution. Bacteria that exhibit resistance to metals are preferred for applications involving metal removal due to their capacity for rapid multiplication and growth. Extremophiles are a special group of microorganisms that are capable of surviving under extreme conditions such as extreme temperatures, pH levels, and high salt concentrations where other organisms cannot. Due to their unique enzymes and adaptive capabilities, extremophiles are well suited as catalysts for environmental biotechnology applications, including the bioremediation of HMs through various strategies. The mechanisms of resistance to HMs by extremophilic bacteria encompass: (i) metal exclusion by permeability barrier; (ii) extracellular metal sequestration by protein/chelator binding; (iii) intracellular sequestration of the metal by protein/chelator binding; (iv) enzymatic detoxification of a metal to a less toxic form; (v) active transport of HMs; (vi) passive tolerance; (vii) reduced metal sensitivity of cellular targets to metal ions; and (viii) morphological change of cells. This review provides comprehensive information on extremophilic bacteria and their potential roles for bioremediation, particularly in environments contaminated with HMs, which pose a threat due to their stability and persistence. Genetic engineering of extremophilic bacteria in stressed environments could help in the bioremediation of contaminated sites. Due to their unique characteristics, these organisms and their enzymes are expected to bridge the gap between biological and chemical industrial processes. However, the structure and biochemical properties of extremophilic bacteria, along with any possible long-term effects of their applications, need to be investigated further.

Biobank of fungi from marine and terrestrial Antarctic environments

Harsh and extreme environments, such as Antarctica, offer unique opportunities to explore new microbial taxa and biomolecules. Given the limited knowledge on microbial diversity, this study aimed to compile, analyze and compare a subset of the biobank of Antarctic fungi maintained at the UNESP's Central of Microbial Resources (CRM-UNESP). A total of 711 isolates (240 yeasts and 471 filamentous fungi) from marine and terrestrial samples collected at King George Island (South Shetland Islands, Antarctica) were used with the primary objective of investigating their presence in both marine and terrestrial environments. Among the yeasts, 13 genera were found, predominantly belonging to the phylum Basidiomycota. Among the filamentous fungi, 34 genera were represented, predominantly from the phylum Ascomycota. The most abundant genera in the marine samples were Metschnikowia, Mrakia, and Pseudogymnoascus, while in the terrestrial samples, they were Pseudogymnoascus, Leucosporidium, and Mortierella. Most of the genera and species of the CRM-UNESP biobank of Antarctic fungi are being reported as an important target for biotechnological applications. This study showed the relevance of the CRM-UNESP biobank, highlighting the importance of applying standard methods for the preservation of the biological material and associated data (BMaD), as recommended in national and international standards.

Halo-alkaliphilic microbes as an effective tool for heavy metal pollution abatement and resource recovery: challenges and future prospects

The current study presents an overview of heavy metals bioremediation from halo-alkaline conditions by using extremophilic microorganisms. Heavy metal remediation from the extreme environment with high pH and elevated salt concentration is a challenge as mesophilic microorganisms are unable to thrive under these polyextremophilic conditions. Thus, for effective bioremediation of extreme systems, specialized microbes (extremophiles) are projected as potential bioremediating agents, that not only thrive under such extreme conditions but are also capable of remediating heavy metals from these environments. The physiological versatility of extremophiles especially halophiles and alkaliphiles and their enzymes (extremozymes) could conveniently be harnessed to remediate and detoxify heavy metals from the high alkaline saline environment. Bibliometric analysis has shown that research in this direction has found pace in recent years and thus this review is a timely attempt to highlight the importance of halo-alkaliphiles for effective contaminant removal in extreme conditions. Also, this review systematically presents insights on adaptive measures utilized by extremophiles to cope with harsh environments and outlines the role of extremophilic microbes in industrial wastewater treatment and recovery of metals from waste with relevant examples. Further, the major challenges and way forward for the effective applicability of halo-alkaliphilic microbes in heavy metals bioremediation from extremophilic conditions are also highlighted.

Techno-economic analysis of phytoremediation: A strategic rethinking

Phytoremediation is a cost-effective and environmentally sound approach, which uses plants to immobilize/stabilize, extract, decay, or lessen toxicity and contaminants. Despite successful evidence of field application, such as natural attenuations, and self-purification, the main barriers remain from a "promising" to a "commercial" approach. Therefore, the ultimate goal of this paper is to examine factors that contribute to phytoremediation's underutilization and discuss the real costs of phytoremediation when the time and land values are considered. We revisit mechanisms and processes of phytoremediation. We synthesize existing information and understanding based on previous works done on phytoremediation and its applications to provide the technical assessment and perspective views in the commercial acceptance of phytoremediation. The results show that phytoremediation is the most suitable for remote regions with low land values. Since these regions allow a longer period to be restored, land vegetation covers can be established in more or less time like natural attenuation. Since the length of phytoremediation is an inherent limitation, this inherent disadvantage limits its adoption in developed business regions, such as growing urban areas. Because high land values could not be recovered in the short term, phytoremediation is not cost-effective in those regions. We examine the potential measures that can enhance the performance of phytoremediation, such as soil amendments, and agricultural practices. The results obtained through review can clarify where/what conditions phytoremediation can provide the most suitable solutions at a large scale. Finally, we identify the main barriers and knowledge gaps to establishing a vegetation cover in large-scale applications and highlight the research priorities for increased acceptance of phytoremediation.

Novel BTEX-degrading strains from subsurface soil: Isolation, identification and growth evaluation

Monoaromatic hydrocarbons such as benzene, toluene, ethylbenzene, and o, m, and p-xylenes (BTEX) are high-risk pollutants because of their mutagenic and carcinogenic nature. These pollutants are found with elevated levels in groundwater and soil in Canada at several contaminated sites. The intrinsic microbes present in the subsurface have the potential to degrade pollutants by their metabolic pathways and convert them to non-toxic products. However, the low subsurface temperature (5-10 °C) limits their growth and degradation ability. This study examined the feasibility of subsurface heat augmentation using geothermal heating for BTEX bioremediation. Novel potent BTEX-degrading bacterial strains were isolated from soil at 3.0, 42.6, and 73.2 m depths collected from a geothermal borehole during installation and screened using an enrichment technique. The selected strains were identified with Sanger sequencing and phylogenetic tree analysis, revealing that all the strains except Bacillus subtilis are novel with respective to BTEX degradation. The isolates, Microbacterium esteraromaticum and Bacillus infantis showed the highest degradation with 67.98 and 65.2% for benzene, 72.8 and 71.02% for toluene, 77.52 and 76.44% for ethylbenzene, and 74.58 and 74.04% for xylenes respectively. Further, temperature influence at 15 ± 1 °C, 28 ± 1 °C and 40 ± 1 °C was observed, which showed increased growth by two-fold and on average 35-49% more biodegradation at higher temperatures. Results showed that temperature is a positive stimulant for bioremediation, hence geothermal heating could also be a stimulant for in-situ bioremediation.

Mycosynthesis of silver nanoparticles using psychrotrophic strains of Tulasnella albida Bourdot & Galzin from the South Orkney Islands (Antarctica)

This study is the first report on mycosynthesis of silver nanoparticles (NPs) using psychrotrophic Antarctic filamentous fungi, and the first report regarding Tulasnella (Basidiomycota). In this work, the ability to synthesize silver NPs from cell free filtrates of strains of Tulasnella albida isolated from Antarctica was assessed. All fungal filtrates were capable of synthesizing silver NPs with the addition of AgNO3. UV-vis spectroscopy, TEM and SEM microscopy analyses were performed to characterize the synthesized NPs. ATR-FTIR and Micro Raman spectroscopy analyses were conducted to find functional groups responsible for the reduction of AgNO3 and to detect the presence of silver oxide on the AgNPs. Theoretical calculations of optical absorption based on core-shell Ag-Ag2O were used to characterize the experimental absorption spectra of silver NPs colloids. Spherically shaped silver NPs, typically 2-3nm in diameter, were obtained. The largest ones showed a capping shell around them, which could be associated with the formation of small silver NPs. Functional groups corresponding to amides and alcohols were detected, confirming the presence of proteins as possible intermediates in the synthesis of AgNPs. On the other hand, the Micro Raman analysis confirms the presence of silver oxide on the surface of the AgNPs. This work presents a simple procedure for the synthesis of silver NPs using a psychrotrophic organism that could be interesting for the industry.

Biodegradation of Congo Red Dye Using Lysinibacillus Species in a Moving Bed Biofilm Reactor: Continuous Study and Kinetic Evaluation

The objective of this work was to develop a low-cost and efficient biocarrier for biodegradation of azo dye (i.e., Congo red (CR) dye). The potential bacterial species, i.e., Lysinibacillus fusiformis KLM1 and Lysinibacillus macrolides KLM2, were isolated from the dye-contaminated site. These bacterial species were immobilized onto the polypropylene-polyurethane foam (PP-PUF) and employed in a moving bed biofilm reactor (MBBR) for the treatment of CR dye. The effectiveness of the MBBR was investigated by operating the bioreactor in a continuous mode at various initial CR dye concentrations (50-250 mg/L) for 113 days. The removal efficiency was found in the range of 88.4-64.6% when the initial dye concentration was varied from 50 to 250 mg/L. The maximum elimination capacity (EC) of 213.18 mg/L.d was found at 250 mg/L of CR dye concentration. In addition, the CR dye utilization rate in the MBBR was studied by using two kinetics, namely, first-order and second-order (Grau) models. The high regression coefficients (R2 > 0.97) and the satisfactory root mean square (RMSE) values (0.00096-0.02610) indicated the reasonable prediction of CR dye degradation rate by the Grau model.

Role of Microbes in the degradation of organic semivolatile compounds in polar ecosystems: A review

The Arctic and the Antarctic Continent correspond to two eco-regions with extreme climatic conditions. These regions are exposed to the presence of contaminants resulting from human activity (local and global), which, in turn, represent a challenge for life forms in these environments. Anthropogenic pollution by semi-volatile organic compounds (SVOCs) in polar ecosystems has been documented since the 1960s. Currently, various studies have shown the presence of SVOCs and their bioaccumulation and biomagnification in the polar regions with negative effects on biodiversity and the ecosystem. Although the production and use of these compounds has been regulated, their persistence continues to threaten biodiversity and the ecosystem. Here, we summarize the current literature regarding microbes and SVOCs in polar regions and pose that bioremediation by native microorganisms is a feasible strategy to mitigate the presence of SVOCs. Our systematic review revealed that microbial communities in polar environments represent a wide reservoir of biodiversity adapted to extreme conditions, found both in terrestrial and aquatic environments, freely or in association with vegetation. Microorganisms adapted to these environments have the potential for biodegradation of SVOCs through a variety of genes encoding enzymes with the capacity to metabolize SVOCs. We suggest that a comprehensive approach at the molecular and ecological level is required to mitigate SVOCs presence in these regions. This is especially patent when considering that SVOCs degrade at slow rates and possess the ability to accumulate in polar ecosystems. The implications of SVOC degradation are relevant for the preservation of polar ecosystems with consequences at a global level.

Investigating Bio-Inspired Degradation of Toxic Dyes Using Potential Multi-Enzyme Producing Extremophiles

Biological treatment methods overcome many of the drawbacks of physicochemical strategies and play a significant role in removing dye contamination for environmental sustainability. Numerous microorganisms have been investigated as promising dye-degrading candidates because of their high metabolic potential. However, few can be applied on a large scale because of the extremely harsh conditions in effluents polluted with multiple dyes, such as alkaline pH, high salinity/heavy metals/dye concentration, high temperature, and oxidative stress. Therefore, extremophilic microorganisms offer enormous opportunities for practical biodegradation processes as they are naturally adapted to multi-stress conditions due to the special structure of their cell wall, capsule, S-layer proteins, extracellular polymer substances (EPS), and siderophores structural and functional properties such as poly-enzymes produced. This review provides scientific information for a broader understanding of general dyes, their toxicity, and their harmful effects. The advantages and disadvantages of physicochemical methods are also highlighted and compared to those of microbial strategies. New techniques and methodologies used in recent studies are briefly summarized and discussed. In particular, this study addresses the key adaptation mechanisms, whole-cell, enzymatic degradation, and non-enzymatic pathways in aerobic, anaerobic, and combination conditions of extremophiles in dye degradation and decolorization. Furthermore, they have special metabolic pathways and protein frameworks that contribute significantly to the complete mineralization and decolorization of the dye when all functions are turned on. The high potential efficiency of microbial degradation by unculturable and multi-enzyme-producing extremophiles remains a question that needs to be answered in practical research.

Recent Advances in the Biocatalytic Mitigation of Emerging Pollutants: A Comprehensive Review

The issue of environmental pollution has been worsened by the emergence of new contaminants whose morphology is yet to be fully understood. Several techniques have been adopted to mitigate the pollution effects of these emerging contaminants, and bioremediation involving plants, microbes, or enzymes has stood out as a cost-effective and eco-friendly approach. Enzyme-mediated bioremediation is a very promising technology as it exhibits better pollutant degradation activity and generates less waste. However, this technology is subject to challenges like temperature, pH, and storage stability, in addition to recycling difficulty as it is arduous to isolate them from the reaction media. To address these challenges, the immobilization of enzymes has been successfully applied to ameliorate the activity, stability, and reusability of enzymes. Although this has significantly increased the uses of enzymes over a wide range of environmental conditions and facilitated the use of smaller bioreactors thereby saving cost, it still comes with additional costs for carriers and immobilization. Additionally, the existing immobilization methods have their individual limitations. This review provides state-of-the-art information to readers focusing on bioremediation using enzymes. Different parameters such as: the sustainability of biocatalysts, the ecotoxicological evaluation of transformation contaminants, and enzyme groups used were reviewed. The efficacy of free and immobilized enzymes, materials and methods for immobilization, bioreactors used, challenges to large-scale implementation, and future research needs were thoroughly discussed.

More effective application of biochar-based immobilization technology in the environment: Understanding the role of biochar

In recent years, biochar-based immobilization technology (BIT) has been widely used to treat different environmental issues because of its cost-effectiveness and high removal performance. However, the complexity of the real environment is always ignored, which hinders the transfer of the BIT from lab-scale to commercial applications. Therefore, in this review, the analysis is performed separately on the internal side of the BIT (microbial fixation and growth) and on the external side of the BIT (function) to achieve effective BIT performance. Importantly, the internal two stages of BIT have been discussed concisely. Further, the usage of BIT in different areas is summarized precisely. Notably, the key impacts were systemically analyzed during BIT applications including environmental conditions and biochar types. Finally, the suggestions and perspectives are elucidated to solve current issues regarding BIT.

Endophytic, extremophilic and entomophilic fungi strains biodegrade anthracene showing potential for bioremediation

Anthropogenic activities have been increasing Polycyclic Aromatic Hydrocarbons (PAHs) release, promoting an urgent need for decontamination methods. Therefore, anthracene biodegradation by endophytic, extremophilic, and entomophilic fungi was studied. Moreover, a salting-out extraction methodology with the renewable solvent ethanol and the innocuous salt K₂HPO₄ was employed. Nine of the ten employed strains biodegraded anthracene in liquid medium (19-56% biodegradation) after 14 days at 30 °C, 130 rpm, and 100 mg L^-1. The most efficient strain Didymellaceae sp. LaBioMMi 155, an entomophilic strain, was employed for optimized biodegradation, aiming at a better understanding of how factors like pollutant initial concentration, pH, and temperature affected this process. Biodegradation reached 90 ± 11% at 22 °C, pH 9.0, and 50 mg L^-1. Futhermore, 8 different PAHs were biodegraded and metabolites were identified. Then, experiments with anthracene in soil ex situ were performed and bioaugmentation with Didymellaceae sp. LaBioMMi 155 presented better results than natural attenuation by the native microbiome and biostimulation by the addition of liquid nutrient medium into soil. Therefore, an expanded knowledge about PAHs biodegradation processes was achieved with emphasis to the action of Didymellaceae sp. LaBioMMi 155, which can be further employed for in situ biodegradation (after strain security test), or for enzyme identification and isolation aiming at oxygenases with optimal activity under alkaline conditions.

Impact of biological activated carbon filtration and backwashing on the behaviour of PFASs in drinking water treatment plants

PFASs are present in surface water, tap water and even commercial drinking water and pose a risk to human health. In this study, the treatment efficiency of 14 PFASs was studied in a large drinking water treatment plant (DWTP) using Taihu Lake as the source, and it was found that the ozone/biological activated carbon (O₃-BAC) process was the most effective process for the removal of PFASs in DWTPs. For the O₃-BAC process, there were differences in the removal of PFASs by BACs (1,4,7,13 years) of different ages. The sterilization experiments revealed that for GAC, its physical adsorption capacity reached saturation after one year, while for BAC with mature biofilms, biosorption was the main mechanism for the removal of PFASs. The abundance of Alphaproteobacteria and Gammaproteobacteria in biofilms was positively correlated with the age of the BAC. The microbial community with higher abundance is beneficial to the biodegradation of organic matter and thus provides more active sites for the adsorption of PFASs. PFASs can leak in the early stage of filtration after backwashing, so it is necessary to pay close attention to the influent and effluent concentrations of PFASs during biofilm maturation after backwashing.

Toxic heavy metal/oxyanion tolerance in haloarchaea from some saline and hypersaline ecosystems

Toxic heavy metal/oxyanion contamination has increased severely through the last decades. In this study, 169 native haloarchaeal strains were isolated from different saline and hypersaline econiches of Iran. After providing pure culture and performing morphological, physiological, and biochemical tests, haloarchaea resistance toward arsenate, selenite, chromate, cadmium, zinc, lead, copper, and mercury were surveyed using an agar dilution method. On the basis of minimum inhibitory concentrations (MICs), the least toxicities were found with selenite and arsenate, while the haloarchaeal strains revealed the highest sensitivity for mercury. On the other hand, the majority of haloarchaeal strains exhibited similar responses to chromate and zinc, whereas the resistance level of the isolates to lead, cadmium, and copper was very heterogeneous. 16 S ribosomal RNA (rRNA) gene sequence analysis revealed that most haloarchaeal strains belong to the Halorubrum and Natrinema genera. The obtained results from this study showed that among the identified isolates, Halococcus morrhuae strain 498 had an exceptional resistance toward selenite and cadmium (64 and 16 mM, respectively). Also, Halovarius luteus strain DA5 exhibited a remarkable tolerance against copper (32 mM). Moreover, strain Salt5, identified as Haloarcula sp., was the only strain that could tolerate all eight tested heavy metals/oxyanions and had a significant tolerance of mercury (1.5 mM).

Synthetic biology of extremophiles: a new wave of biomanufacturing

Microbial biomanufacturing, powered by the advances of synthetic biology, has attracted growing interest for the production of diverse products. In contrast to conventional microbes, extremophiles have shown better performance for low-cost production owing to their outstanding growth and synthesis capacity under stress conditions, allowing unsterilized fermentation processes. We review increasing numbers of products already manufactured utilizing extremophiles in recent years. In addition, genetic parts, molecular tools, and manipulation approaches for extremophile engineering are also summarized, and challenges and opportunities are predicted for non-conventional chassis. Next-generation industrial biotechnology (NGIB) based on engineered extremophiles promises to simplify biomanufacturing processes and achieve open and continuous fermentation, without sterilization, and utilizing low-cost substrates, making NGIB an attractive green process for sustainable manufacturing.

Calcium ion removal at different sodium chloride concentrations by free and immobilized halophilic bacteria

Much attention has been paid to Ca²⁺ ion removal by biomineralization due to the dangers of Ca²⁺ on industrial processes and human health. However, Ca²⁺ removal from hypersaline water by biomineralization is quite difficult due to there being few halophilic bacteria tolerating higher salinities. In this study, free and immobilized Virgibacillus massiliensis C halophilic bacteria exhibiting carbonic anhydrase activity were used to remove Ca²⁺ ions from water at different NaCl concentrations. With increasing NaCl concentrations (10, 50, 100, 150 and 200 g/L), Ca²⁺ ion concentrations in the presence of free bacteria and in two groups of immobilized bacteria for a period of 6 days sharply decreased from 1200 mg/L to 219-562 mg/L, 71-214 mg/L and 21-159 mg/L, respectively; Ca²⁺ precipitation ratios were 55%-81%, 82%-94% and 87%-98%, respectively. The humic acid-like substances, protein, DNA and polysaccharide, released by the bacteria, promoted the Ca²⁺ ion removal. The immobilized bacteria were able to be recycled and precultured, which would save industry costs and increase Ca²⁺ ion removal efficiency. Biological processes for Ca²⁺ ion removal include cell surface, intracellular and extracellular biomineralization. The biogenesis of calcium carbonate was proved by SEM-EDS, FTIR, XPS and stable carbon isotope values. This study provides insights into the effective removal of Ca²⁺ ions by biomineralization in hypersaline water.

Efficient Mn(II) removal mechanism by Serratia marcescens QZB-1 at high manganese concentration

Manganese (Mn(II)) pollution has recently increased and requires efficient remediation. In this study, Serratia marcescens QZB-1, isolated from acidic red soil, exhibited high tolerance against Mn(II) (up to 364 mM). Strain QZB-1 removed a total of 98.4% of 18 mM Mn(II), with an adsorption rate of 71.4% and oxidation rate of 28.6% after incubation for 48 h. The strain synthesized more protein (PN) to absorb Mn(II) when stimulated with Mn(II). The pH value of the cultural medium continuously increased during the Mn(II) removal process. The product crystal composition (mainly MnO₂ and MnCO₃), Mn-O functional group, and element-level fluctuations confirmed Mn oxidation. Overall, strain QZB-1 efficiently removed high concentration of Mn(II) mainly via adsorption and showed great potential for manganese wastewater removal.

Bio-removal of emerging pollutants by advanced bioremediation techniques

This review highlights the relevance of bioremediation techniques for the removal of emerging pollutants (EPs). The EPs are chemical or biological pollutants that are not currently monitored or regulated by environmental authorities, but which can enter the environment and cause harmful effects to the environment and human health. In recent times, an ample range of EPs have been found in water bodies, where they can unbalance ecosystems and cause negative effects on non-target species. In addition, some EPs have shown high rates of bioaccumulation in aquatic species, thus affecting the safety and quality of seafood. The negative impacts of emerging pollutants, their wide distribution in the environment, their bioaccumulation rates, and their resistance to wastewater treatment plants processes have led to research on sustainable remediation. Remediation techniques have been recently directed to advanced biological remediation technologies. Such technologies have exhibited numerous advantages like in-situ remediation, low costs, eco-friendliness, high public acceptance, and so on. Thus, the present review has compiled the most recent studies on bioremediation techniques for water decontamination from emerging pollutants to extend the current knowledge on sustainable remediation technologies. Biological emerging contaminants, agrochemicals, endocrine-disrupting chemicals, and pharmaceutical and personal care products were considered for this review study, and their removal by bioremediation techniques involving plants, bacteria, microalgae, and fungi. Finally, further research opportunities are presented based on current challenges from an economic, biological, and operation perspective.

Heavy metal(loid)s shape the soil bacterial community and functional genes of desert grassland in a gold mining area in the semi-arid region

Gold mining can create serious environmental problems, such as soil pollution by heavy metal (loid)s. In this study, we assessed the ecological risk of Hatu gold mining activities and synchronously investigated the bacterial community structure, distribution of soil nutrient-element cycling genes (CNPS) and heavy metal resistance genes (MRG) in adjacent desert grassland soil. The study area was above the moderate risk level, with the ecological risk index (RI) of each sampling site greater than 150. Arsenic, mercury and copper were the main pollutants. Proteobacteria, Actinobacteria and Firmicutes dominated the phyla of the bacterial communities. Species turnover rather than nestedness accounted for the significant differences in community structure among various regions in the mining area. In addition, the bioavailable heavy metal (loid)s (AHM) content had a strong correlation with beta diversity and species turnover of the bacterial community (p < 0.05). No clear difference was found in the total abundance of CNPS genes among various functional regions, but eight specific functional genes were identified from downwind grasslands with lower pollution levels. Among the MRGs, Hg MRG had the highest average total relative abundance, followed by Cu, Co/Zn/Cd and As. The mercury resistance gene subtype hgcAB was positively related to the diversity of the bacterial community, and the bacterial community of grassland soil showed congruency with the MRGs in the Hatu mining area. Total Hg (THg) showed the highest influence affecting the bacterial community, while NH₄⁺-N had the greatest effect on CNPS genes and MRGs. These results highlighted the role of heavy metal (loid)s in shaping the bacterial community and functional genes in arid and semiarid desert grassland soil in gold mining regions.

Application of visible light active photocatalysis for water contaminants: A review

Organic water pollutants are ubiquitous in the natural environment arising from domestic products as well as current and legacy industrial processes. Many of these organic water pollutants are recalcitrant and only partially degraded using conventional water and wastewater treatment processes. In recent decades, visible light active photocatalyst has gained attention as a non-conventional alternative for the removal of organic pollutants during water treatment, including industrial wastewater and drinking water treatment. This paper reviews the current state of research on the use of visible light active photocatalysts, their modified methods, efficacy, and pilot-scale applications for the degradation of organic pollutants in water supplies and waste streams. Initially, the general mechanism of the visible light active photocatalyst is evaluated, followed by an overview of the major synthesis techniques. Because few of these photocatalysts are commercialized, particular attention was given to summarizing the different types of visible light active photocatalysts developed to the pilot-scale stage for practical application and commercialization. The organic pollutant degradation ability of these visible light active photocatalysts was found to be considerable and in many cases comparable with existing and commercially available advanced oxidation processes. Finally, this review concludes with a summary of current achievements and challenges as well as possible directions for further research. PRACTITIONER POINTS: Visible light active photocatalysis is a promising advanced oxidation process (AOP) for the reduction of organic water pollutants. Various mechanisms of photocatalysis using visible light active materials are identified and discussed. Many recent photocatalysts are synthesized from renewable materials that are more sustainable for applications in the 21st century. Only a small number of pilot-scale applications exist and these are outlined in this review.

Enhanced Congo Red Adsorption and Photo-Fenton Oxidation over an Iron-Impeded Geopolymer from Ferruginous Kaolinite: Steric, Energetic, Oxidation, and Synergetic Studies

An iron-impeded geopolymer (Fe/GP) was synthesized from natural ferruginous kaolinite and optical waste for enhanced decontamination of Congo red (CR) dye. The adsorption properties of Fe/GP were assessed using an advanced monolayer equilibrium model of one energy (R ² > 0.99). Fe/GP possessed an active site density of 391.3 mg/g, which induced an adsorption capacity of 634 mg/g at the saturation state. The number of adsorbed CR molecules per site (n = 1.56-1.62) reflected the possible uptake of two molecules per site via a multimolecular mechanism. The adsorption energy (5.12-5.7 kJ/mol) reflected the physical adsorption of the CR molecules via hydrogen bonding and/or van der Waals forces. As a catalyst, notable activity toward photo-Fenton oxidation was achieved even at high CR concentrations. Complete oxidation was observed after 30 (CR concentration: 10 mg/L), 50 (20 mg/L), 80 (30 mg/L), 120 (40 mg/L), and 140 min (50 mg/L). High oxidation efficiency was achieved using 0.1 g/L Fe/GP, 0.1 mL of hydrogen peroxide (H₂O₂), and a visible light source. Increasing the Fe/GP dosage to 0.3 g/L resulted in complete oxidation of CR (100 mg/L) after 220 min. Therefore, synthetic Fe/GP can be used as a low-cost and superior catalyst and adsorbent for the removal of CR-based contaminants via adsorption or advanced oxidation processes.

Exploring the significance of nanomaterials and organic amendments - Prospect for phytoremediation of contaminated agroecosystem

Emerging micro-pollutants have rapidly contaminated the agro-ecosystem, posing serious challenges to a sustainable future. The vast majority of them have infiltrated the soil and damaged agricultural fields and crops after being released from industry. These pollutants and their transformed products are also transported in vast quantities which further exacerbate the damage. Sustainable remediation techniques are warranted for such large amounts of contaminants. As aforementioned, many of them have been detected at very high concentrations in soil and water which adversely affect crop physiology by disrupting different metabolic processes. To combat this situation, nanomaterials and other organic amendments assisted phytoremediation ware considered as a viable alternative. It is a potent synergistic activity between the biological system and the supplied organic or nanomaterial material to eliminate emerging contaminants and micropollutants from crop fields. This can be effectively be applied to degraded crop fields and could potentially embody a green technology for sustainable agriculture.

Rhizosphere microbial community composition and survival strategies in oligotrophic and metal(loid) contaminated iron tailings areas

In this study, the metal(loid) fractions in two alkaline iron tailings areas with similar physico-chemical properties and the enrichment ability of dominant plants in these areas were investigated. Additionally, high-throughput sequencing and metagenome analysis were used to examine the rhizosphere microbial community structures and their strategies and potential for carbon fixation, nitrogen metabolism, and metal(loid) resistance in mining areas. Results showed that Salsola collina, Setaria viridis, and Xanthium sibiricum have strong enrichment capacity for As, and the maximum transport factor for Mn can reach 4.01. The richness and diversity of bacteria were the highest in rhizosphere tailings, and the dominant phyla were Proteobacteria, Actinobacteria, Ascomycota, and Thaumarchaeota. The key taxa present in rhizosphere tailings were generally metal(loid) resistant, especially Sphingomonas, Pseudomonas, Nocardioides, and Microbacterium. The reductive citrate cycle was the main carbon fixation pathway of microorganisms in tailings. Rhizosphere microorganisms have evolved a series of survival strategies and can adapt to oligotrophic and metal(loid) polluted mining environments. The results of this study provide a basis for the potential application of plant-microbial in situ remediation of alkaline tailings.

Functional microbiome strategies for the bioremediation of petroleum-hydrocarbon and heavy metal contaminated soils: A review

Petroleum hydrocarbons and heavy metals are the two major soil contaminants that are released into the environment in the forms of industrial effluents. These contaminants exert serious impacts on human health and the sustainability of the environment. In this context, remediation of these pollutants via a biological approach can be effective, low-cost, and eco-friendly approach. The implementation of microorganisms and metagenomics are regarded as the advanced solution for remediating such pollutants. Further, microbiomes can overcome this issue via adopting specific structural, functional and metabolic pathways involved in the microbial community to degrade these pollutants. Genomic sequencing and library can effectively channelize the degradation of these pollutants via microbiomes. Nevertheless, more advanced technology and reliable strategies are required to develop. The present review provides insights into the role of microbiomes to effectively remediate/degrade petroleum hydrocarbons and heavy metals in contaminated soil. The possible degradation mechanisms of these pollutants have also been discussed in detail along with their existing limitations. Finally, prospects of the bioremediation strategies using microbiomes are discussed.

Effects of co-occurrence of PFASs and chlorinated aliphatic hydrocarbons on microbial communities in groundwater: A field study

The effects of per- and polyfluoroalkyl substances (PFASs) and chlorinated aliphatic hydrocarbons (CAHs) co-contamination on the microbial community in the field have not been studied. In this study, we evaluated the presence of PFASs and CAHs in groundwater collected from a fluorochemical plant (FCP), and carried out Illumina MiSeq sequencing to understand the impact of mixed PFASs and CAHs on the indigenous microbial community. The sum concentrations of 20 PFASs in FCP groundwater ranged from 2.05 to 317.40 μg/L, and the highest PFOA concentration was observed in the deep aquifer (60 m below ground surface), co-contaminated by dense non-aqueous-phase liquid (DNAPL). The existence of PFASs and CAHs co-contamination in groundwater resulted in a considerable decrease in the diversity of microbial communities, while the abundance of metabolisms associated with contaminants biodegradation has increased significantly compared to the background wells. Furthermore, Acinetobacter, Pseudomonas and Arthrobacter were the dominant genera in PFASs and CAHs co-contaminated groundwater. The presence of high concentrations of PFASs and CAHs has been positively associated with the genus of Citreitalea. Finally, geochemical parameters, such as ORP, sulfate and nitrate were the key factors to shape up the structure of the microbial community and sources to rich the abundance of the potential functional bacteria.

Insights into the spatiotemporal differences in tailings seepage pollution by assessing the diversity and metabolic functions of the soil microbial community

The formation of tailings ponds depends on the long-term accumulation of tailing and high terrain. Its seepage pollution characteristics may have gradient variations on spatiotemporal scales. Used three nearby metal tailings ponds with different service times, we aimed to reveal seepage pollution trends on spatiotemporal scales and the response of soil microbial community. The results showed that the degree of seepage pollution was negatively correlated with the distance from the tailings pond on the spatial scale, while the seepage pollution showed higher levels in tailings ponds with longer service times on the temporal scale (RI = 248.04-2109.85). The pollution effect of seepage persisted after the tailings pond was discontinued (RI = 226.72). Soil microbial diversity increased with spatial scale expansion. The proportion of Actinomyces gradually increased and Proteobacteria decreased. Cr (r = 0.21) and Fe (r = 0.22) contributed more to the microbial community changes. Functional predictions showed that pathways related to signal transduction and energy metabolism were more abundant in the tailings pond. In contaminated areas, the proportion of nitrate respiration and cellulolysis functional communities had decreased, and some potentially pathogenic human taxa had accumulated. These results emphasized that there was pollution accumulation on temporal scale and pollution dispersion on spatial scale around tailings ponds, and the response of the microbial community further illustrated these trends.

Role of microbes in bioaccumulation of heavy metals in municipal solid waste: Impacts on plant and human being

The presence of heavy metals in municipal solid waste (MSW) is considered as prevalent global pollutants that cause serious risks to the environment and living organisms. Due to industrial and anthropogenic activities, the accumulation of heavy metals in the environmental matrices is increasing alarmingly. MSW causes several adverse environmental impacts, including greenhouse gas (GHG) emissions, river plastic accumulation, and other environmental pollution. Indigenous microorganisms (Pseudomonas, Flavobacterium, Bacillus, Nitrosomonas, etc.) with the help of new pathways and metabolic channels can offer the potential approaches for the treatment of pollutants. Microorganisms, that exhibit the ability of bioaccumulation and sequestration of metal ions in their intracellular spaces, can be utilized further for the cellular processes like enzyme signaling, catalysis, stabilizing charges on biomolecules, etc. Microbiological techniques for the treatment and remediation of heavy metals provide a new prospects for MSW management. This review provides the key insights on profiling of heavy metals in MSW, tolerance of microorganisms, and application of indigenous microorganisms in bioremediation. The literatures revealed that indigenous microbes can be exploited as potential agents for bioremediation.

Thermally enhanced bioremediation: A review of the fundamentals and applications in soil and groundwater remediation

Thermally enhanced bioremediation (TEB), a new concept proposed in recent years, explores the combination of thermal treatment and bioremediation to address the challenges of the low efficiency and long duration of bioremediation. This study presented a comprehensive review regarding the fundamentals of TEB and its applications in soil and groundwater remediation. The temperature effects on the bioremediation of contaminants were systematically reviewed. The thermal effects on the physical, chemical and biological characteristics of soil, and the corresponding changes of contaminants bioavailability and microbial metabolic activities were summarized. Specifically, the increase in temperature within a suitable range can proliferate enzymes enrichment, extracellular polysaccharides and biosurfactants production, and further enhancing bioremediation. Furthermore, a systematic evaluation of TEB applications by utilizing traditional in situ heating technologies, as well as renewable energy (e.g., stored aquifer thermal energy and solar energy), was provided. Additionally, TEB has been applied as a biological polishing technology post thermal treatment, which can be a cost-effective method to address the contaminants rebounds in groundwater remediation. However, there are still various challenges to be addressed in TEB, and future research perspectives to further improve the basic understanding and applications of TEB for the remediation of contaminated soil and groundwater are presented.

Adaptive Response of Thermophiles to Redox Stress and Their Role in the Process of dye Degradation From Textile Industry Wastewater

Release of dye-containing textile wastewater into the environment causes severe pollution with serious consequences on aquatic life. Bioremediation of dyes using thermophilic microorganisms has recently attracted attention over conventional treatment techniques. Thermophiles have the natural ability to survive under extreme environmental conditions, including high dye concentration, because they possess stress response adaptation and regulation mechanisms. Therefore, dye detoxification by thermophiles could offer enormous opportunities for bioremediation at elevated temperatures. In addition, the processes of degradation generate reactive oxygen species (ROS) and subject cells to oxidative stress. However, thermophiles exhibit better adaptation to resist the effects of oxidative stress. Some of the major adaptation mechanisms of thermophiles include macromolecule repair system; enzymes such as superoxide dismutase, catalase, and glutathione peroxidase; and non-enzymatic antioxidants like extracellular polymeric substance (EPSs), polyhydroxyalkanoates (PHAs), etc. In addition, different bacteria also possess enzymes that are directly involved in dye degradation such as azoreductase, laccase, and peroxidase. Therefore, through these processes, dyes are first degraded into smaller intermediate products finally releasing products that are non-toxic or of low toxicity. In this review, we discuss the sources of oxidative stress in thermophiles, the adaptive response of thermophiles to redox stress and their roles in dye removal, and the regulation and crosstalk between responses to oxidative stress.