Synergistic adsorption and electrocatalytic reduction of bromate by Pd/N-doped loofah sponge-derived biochar electrode

Robust Activity and Stability of P-Doped Fe-Carbon Composites Derived from MOF for Bromate Reduction

Iron-based materials are effective for the reductive removal of the disinfection byproduct bromate in water, while the construction of highly stable and active Fe-based materials with wide pH adaptability remains greatly challenging. In this study, highly dispersed iron phosphide-decorated porous carbon (Fe2P(x)@P(z)NC-y) was prepared via the thermal hydrolysis of Fe@ZIF-8, followed by phosphorus doping (P-doping) and pyrolysis. The reduction performances of Fe2P(x)@P(z)NC-y for bromate reduction were evaluated. Characterization results showed that the Fe, P, and N elements were homogeneously distributed in the carbonaceous matrix. P-doping regulated the coordination environment of Fe atoms and enhanced the conductivity, porosity, and wettability of the carbonaceous matrix. As a result, Fe2P(x)@P(1.0)NC-950 exhibited enhanced reactivity and stability with an intrinsic reduction kinetic constant (kint) 1.53-1.85 times higher than Fe(x)@NC-950 without P-doping. Furthermore, Fe2P(0.125)@P(1.0)NC-950 displayed superior reduction efficiency and prominent stability with very low Fe leaching (4.53-22.98 μg L-1) in a wide pH range of 4.0-10.0. The used Fe2P(0.125)@P(1.0)NC-950 could be regenerated by phosphating, and the regenerated Fe2P(0.125)@P(1.0)NC-950 maintained 85% of its primary reduction activity after five reuse cycles. The study clearly demonstrates that Fe2P-decorated porous carbon can be applied as a robust and stable Fe-based material in aqueous bromate reduction.

Scientometric analysis of electrocatalysis in wastewater treatment: today and tomorrow

Electrocatalytic methods are valuable tools for addressing water pollution and scarcity, offering effective pollutant removal and resource recovery. To investigate the current status and future trends of electrocatalysis in wastewater treatment, a detailed analysis of 9417 papers and 4061 patents was conducted using scientometric methods. China emerged as the leading contributor to publications, and collaborations between China and the USA have emerged as the most frequent partnerships. Primary article co-citation clusters focused on oxygen evolution reaction and electrochemical oxidation, transitioning towards advanced oxidation processes ("persulfate activation"), and electrocatalytic reduction processes ("nitrate reduction"). Bifunctional catalysts, theoretical calculations, electrocatalytic combination technologies, and emerging contaminants were identified as current research hotspots. Patent analysis revealed seven types of electrochemical technologies, which were compared using SWOT analysis, highlighting electrochemical oxidation as prominent. The technological evolution presented the pathway of electro-Fenton to combined electrocatalytic technologies with biochemical processes, and finally to coupling with electrocoagulation. Standardized evaluation systems, waste resource utilization, and energy conservation were important directions of innovation in electrocatalytic technologies. Overall, this study provided a reference for researchers to understand the framework of electrocatalysis in wastewater treatment and also shed light on potential avenues for further innovation in the field.

Highly efficient reduction of bromate by vacuum UV/sulfite system

Bromate (BrO3-), a worldwide regulated by-product after ozone disinfection, is often detected in bromide-containing water, and has a strict limit of 10 μg L-1 in potable water. BrO3- degradation by advanced reduction processes (ARPs) has gained much attention because of efficient removal and easy integration with ultraviolet disinfection (UV at 254 nm). In the vacuum UV (VUV, 185/254 nm)/sulfite system, the elimination kinetics of BrO3- increased by 9-fold and 15-fold comparing with VUV alone and UV/sulfite system. This study further demonstrated the hydrated electron (eaq-) works as the dominant species in BrO3- degradation in alkaline solution, while in the acidic solution the H• became a secondary reactive species besides eaq-. Hence, the influences of pH, sulfite concentration, dissolved gas and water matrix on effectiveness of degradation kinetics of BrO3- was explored in details. With increasing pH, the proportion of SO32- species increased and even became the major ones, which also correlated well with the kobs (min-1) of BrO3- degradation. The stability of eaq- also climbs with increasing pH, while that of H• drops significantly. Higher sulfite dosage favored a more rapid degradation of BrO3-. The presence of dissolved oxygen inhibited BrO3- removal due to the scavenging effect of O2 toward eaq- and transformed VUV/sulfite-based ARP to an advanced oxidation process (AOP), which was ineffective for BrO3- removal. BrO3- removal was inhibited to varying degrees after anions (e.g., bicarbonate (HCO3-), chloride (Cl-), nitrate (NO3-)) and humic acid (HA) being added.

Optimizing physico-chemical properties of hierarchical ZnO/TiO2 nano-film by the novel heating method for photocatalytic degradation of antibiotics and dye

The design of semiconductor catalysts with excellent photocatalytic properties, stability, recyclability, and good separation for the treatment of polluted water is still challenging. In this paper, the ZnO/TiO2 nano-thin films were fabricated using the magnetron sputtering technique and then heating the underlying ZnO layer and the upper TiO2 layer for their respective optimal heating time, i. e. heating ZnO for 3 h and heating TiO2 for 2 h. The as-prepared films were characterized. The results show that the preferred growth of TiO2 grains along the [001] axis, relatively large specific surface area, and increased amounts of surface oxygen vacancies (OVs) were induced to the heterojunction catalysts through this optimized heating strategy, which boosts the photocatalytic activity of ZnO/TiO2 nano-film. The degradation experiment inndicates that the ciprofloxacin (CIP) removal efficiency can reach 97.3% in 2 h duration, which was higher than that of the samples annealed for the same periods. Meanwhile, the prepared ZnO/TiO2 photocatalytic film exhibited favorable stability of 95.5% degradation efficiency after the fourth run and general applicability for the photodegradation of various contantains, whih removed 99.5% of ofloxacin (OFX) and 77.6% of tetracycline (TC) in 2 h and 94.1% of Rhodamine B (RhB) in 1 h. This work is expected to yields a novel insight into the production of heterojunction photocatalysts with excellen ability for photocatalytic degradation of pollutants in the practical industry.

Pd sub-nanolayer on Au core for enhanced catalytic hydrogenation reduction of oxyanions pollutants: Synergistic effect of Pd and Au

Oxyanion pollutants in industrial wasterwater, such as (Cr(VI)), BrO3- (Br(V)) and SeO32- (Se(IV)) have detrimental or toxic effects on individual health when their concentrations accumulated to a certain level. The conversion of these oxyanions into harmless/industrial-valuable products or removal from wastewater is of significance. Herein, we designed Pd sub-nanolayer on Au core catalysts supported on Al2O3 (sub-Pd-Au/Al2O3) for highly effective catalytic hydrogenation reduction of oxyanions under ambient conditions. The sub-Pd(0.049)-Au(0.927)/Al2O3 catalyst exhibited the highest catalytic activity and TOF value for Cr(VI), Br(V) and Se(IV) reduction, respectively, by optimizing the Pd loading amount. The synergistic effect between Pd sub-nanolayer and Au core enhanced catalytic activity by regulating the Pd dispersion and site property, according to thorough characterizations that included high-angle annular dark-field transmission electron microscopy (HAADF-TEM) image, in-situ CO-IR adsorption, CO chemisorption, and X-ray photoelectron spectroscopy (XPS). This work might provide some new lights on design of highly efficient catalysts for the elimination of oxyanion pollutants.

Efficient removal of bromate from contaminated water using electrochemical membrane filtration with metal heteroatom interface

Efficient utilization of atomic hydrogen (H*) is of great importance for achieving efficient bromate reduction using electrochemical technologies. Herein, an electrochemical membrane with metal heteroatom interface of Ru and Ni was developed to enhance the utilization efficiency of H* via the membrane filtration process. The RuNi membrane demonstrated 91.3% of bromate removal at 5 mA cm^-2 under the flow-through operation (40 L m^-2 h^-1). Cyclic voltammetry (CV) curves and electron spin resonance (ESR) spectra elucidated that the bromate reduction was mainly attributed to H* -mediated reduction rather than the direct electron transfer between bromate and RuNi active layer. The quenching experiments revealed a significant contribution of adsorbed H* to the bromate removal during the membrane filtration. Based on X-ray photoelectron spectrometry and X-ray diffraction analyses, we found that the resultant Ru⁰Ni⁰ structure on the electrochemical membrane could facilitate the generation of H* during the bromate reduction reaction. Besides, the higher pH might suppress the formation of H* and increase the energy barrier for breaking the Br-O bond, resulting in dramatic increase of energy consumption for removing bromate. Our work highlights the potential of utilizing H* in electrochemical membrane for removing bromate in water treatment and remediation.

Three-dimensional structured electrode for electrocatalytic organic wastewater purification: Design, mechanism and role

Considering the growing need in decentralized water treatment, the application of electrocatalytic processes (EP) to achieve organic wastewater purification will be dominant in the near future due to high efficiency, small reactor assembly as well as the flexibility of operation and management. The catalytic performance of electrode materials determines the development of this technology. Among them, the unique three-dimensional (3D) structure electrode shows better performance than two-dimensional (2D) electrode in increasing mass transfer, enhancing adsorption and exposing more active sites. Hence, this review starts with the introduction of definition, classification, advantages and disadvantages of 3D electrode materials. Then a critical discussion on the design and construction of 3D electrode materials for organic wastewater purification application is provided. Next, the removal mechanism of organic pollutants on the surface of 3D electrode, the role of 3D structure, the design of reactor with 3D electrode, the conversion and toxicity of degradation products, electrode energy efficiency, stability and cost, are comprehensively reviewed. At last, current challenges and future perspectives for the development of 3D electrode materials are addressed. We deem that this review will provide a valuable insight into the design and application of 3D electrodes in environmental water purification.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Characterization of electrodes modified with sludge-derived biochar and its performance of electrocatalytic oxidation of azo dyes

Pyrolysis of waste sludge in sewage treatment can achieve a substantial reduction in solid waste and obtain sludge-based biochars with multiple functions. However, the electrochemical properties of sludge-derived biochar as electrode modification material and the electrocatalytic ability of biochar-modified electrodes are still unclear. In this study, sludge-based biochars were prepared at various pyrolysis temperatures (400 °C, 500 °C, 600 °C, 700 °C, and 800 °C) and then were cast on glassy carbon electrodes to fabricate composite biochar-electrodes (GC400, GC500, GC600, GC700, and GC800). The results of elemental analysis and Raman spectra showed that sludge-based biochar prepared at higher temperatures exhibited higher aromaticity and degree of defect structures. And the results of cyclic voltammetry and electrochemical impedance spectra confirmed that biochar-modified electrodes prepared at higher temperatures (>600 °C) possessed better electrocatalytic activity and electrochemical stability, and their higher oxygen evolution potential than control test could improve the electrocatalytic efficiency. In the electrocatalytic oxidation of methyl orange, the removal rate with GC800 was the highest, reaching 94.49% within 240 min, and the removal rates with other composite electrodes were 90.61% (GC700) > 86.96% (GC600) > 80.32% (GC). The free radical quenching experiment revealed that the electrocatalytic degradation of methyl orange mainly depended on the indirect oxidation of hydroxyl radicals generated by electrocatalysis, accounting for 81.3% of the removal rate. The biochar-modified electrode not only greatly improved the electrocatalytic ability of the electrode for the degradation of azo dyes, but also achieved the recycling application of products after pyrolysis of sludge waste.

Synergistic effects boost electrocatalytic reduction of bromate on supported bimetallic Ru-Cu catalyst

Bromate is a commonly identified carcinogenic and genotoxic disinfection byproduct in water. In the present work, bimetallic Ru-Cu catalyst supported on carbon nanotube (RuCu/CNT) was prepared and the structural properties of the catalysts were characterized. The results show that the presence of Ru enhances the dispersion and reduction of Cu particles in the RuCu/CNT catalyst in comparison with the monometallic Cu catalyst supported on CNT (Cu/CNT). For electrocatalytic reaction on Cu/CNT, bromate is reduced on metallic Cu surface via a redox process. For Ru/CNT, highly active H* radicals are generated on metallic Ru surface via the Volmer process and are used for bromate reduction. As for the RuCu/CNT, bromate is reduced through two main pathways, including direct redox reaction on metallic Cu and indirect reduction by active H* radicals on Ru surface. Accordingly, RuCu/CNT exhibits the highest catalytic activity, ascribed to the synergistic effect between metallic Ru and Cu. Furthermore, the bimetallic catalyst displays much higher catalytic efficiency as compared with previously reported results. The pH, initial bromate concentration, in-situ electrochemical reduction of the electrodes and working potential have strong impacts on the removal efficiency of bromate on RuCu/CNT.

Bamboo Chopstick Biochar Electrodes and Enhanced Nitrate Removal from Groundwater

The nitrate pollution of groundwater can cause serious harm to human health. Biochar electrodes, combined with adsorption and electroreduction, have great potential in nitrate removal from groundwater. In this study, bamboo chopsticks were used as feedstocks for biochar preparation. The bamboo chopstick biochar (BCBC), prepared by pyrolysis at 600 °C for 2 h, had a specific surface area of 179.2 m2/g and an electrical conductivity of 8869.2 μS/cm, which was an ideal biochar electrode material. The maximum nitrate adsorption capacity of BCBC-600-2 reached 16.39 mg/g. With an applied voltage of 4 V and hydraulic retention time of 4 h, the nitrate removal efficiency (NRE) reached 75.8%. In comparison, the NRE was only 32.9% without voltage and 25.7% with graphite cathode. Meanwhile, the average nitrate removal rate of biochar electrode was also higher than that of graphite cathode under the same conditions. Therefore, biochar electrode can provide full play to the coupling effect of adsorption and electroreduction processes and obtain more powerful nitrate removal ability. Moreover, the biochar electrode could inhibit the accumulation of nitrite and improve the selectivity of electrochemical reduction. This study not only provides a high-quality biochar electrode material, but also provides a new idea for nitrate removal in groundwater.

Facile Synthesis and Environmental Applications of Noble Metal-Based Catalytic Membrane Reactors

Noble metal nanoparticle-loaded catalytic membrane reactors (CMRs) have emerged as a promising method for water decontamination. In this study, we proposed a convenient and green strategy to prepare gold nanoparticle (Au NPs)-loaded CMRs. First, the redox-active substrate membrane (CNT-MoS2) composed of carbon nanotube (CNT) and molybdenum disulfide (MoS2) was prepared by an impregnation method. Water-diluted Au(III) precursor (HAuCl4) was then spontaneously adsorbed on the CNT-MoS2 membrane only through filtration and reduced into Au(0) nanoparticles in situ, which involved a “adsorption–reduction” process between Au(III) and MoS2. The constructed CNT-MoS2@Au membrane demonstrated excellent catalytic activity and stability, where a complete 4-nitrophenol transformation can be obtained within a hydraulic residence time of <3.0 s. In addition, thanks to the electroactivity of CNT networks, the as-designed CMR could also be applied to the electrocatalytic reduction of bromate (>90%) at an applied voltage of −1 V. More importantly, by changing the precursors, one could further obtain the other noble metal-based CMR (e.g., CNT-MoS2@Pd) with superior (electro)catalytic activity. This study provided new insights for the rational design of high-performance CMRs toward various environmental applications.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.

Chitosan-modified biochar: Preparation, modifications, mechanisms and applications

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties. In addition, compared to other adsorbents, the composite truly achieves the concept of "waste control by waste". In this paper, the preparation method, composite classification, adsorption mechanism, and models of biochar modified by chitosan are introduced, meanwhile, we also review and summarize their effects on the decontamination of wastewater and soil. In addition to common heavy metal ions, we also review the adsorption and removal of some other organic/inorganic pollutants, including (1) drug residues; (2) dyes; (3) phosphates; (4) radionuclides; (5) perfluorochemicals, etc. Moreover, challenges and prospects for the composite are presented and further studies are called for the chitosan-biochar composite. We believe that the composite will lead to further achievements in the field of environmental remediation.

High efficiency electrochemical disinfection of Pseudomons putida using electrode of orange peel biochar with endogenous metals

The electrochemical disinfection efficiency of Pseudomons putida was studied using ruthenium iridium coated titanium (RICT) electrode as anode and carbonized orange peel biochar (OPB) or graphite as the cathode. The results indicated that RICT/OPB system induced 6.5 and 7.0 log of P. putia inactivation after 60 s at 2 V and 45 s at 10 V, respectively. RICT/OPB system showed better efficiency than RICT/graphite system. The energy consumption of OPB cathode (17.5 Wh m^-3 per log) was significantly lower than that of graphite cathode (23.09 Wh m^-3 per log). Both anode and cathode played great roles on the disinfection. The anode absorbed electric energy to generate electrical hole, which can oxidize chloride ions to chlorine free radicals. The continuous porous structure of OPB can provide more adsorption sites and reduce electrolyte transport resistance, resulting in more Cl· production. Moreover, P. putia was much easier adsorbed to the anode surface in the RICT/OPB system because of the stronger electrostatic repulsion between cells and OPB cathode. As a result, P. putia was more easily inactivated by the Cl· produced on the anode. Besides chlorine active species, superoxide radical (O₂·﹣) produced on surface of cathode may also result in P. putia inactivation. The endogenous CuO in OPB can induce persistent free radicals (PFRs) production during pyrosis process. O₂·﹣ can be produced by O₂ activation through the function of Cu₂O/CuO and PFRs existed in OPB cathode. The more superoxide radical production led to the better disinfection effect than the graphite cathode. As a consequence, OPB electrode showed high efficiency electrochemical disinfection of P. putida.

Modification of ordered mesoporous carbon for removal of environmental contaminants from aqueous phase: A review

Contamination of water bodies by potentially toxic elements and organic pollutants has aroused extensive concerns worldwide. Thus it is significant to develop effective adsorbents for removing these contaminants. As a new member of carbonaceous material families (activated carbon, biochar, and graphene), ordered mesoporous carbon (OMC) with larger specific surface area, ordered pore structure, and higher pore volume are being evaluated for their use in contaminant removal. In this paper, modification techniques of OMC were systematically reviewed for the first time. These include nonmetallic doping modification (nitrogen, sulfur, and boron) and the impregnation of nano-metals and metal oxides (iron, copper, cobalt, nickel, magnesium, and rare earth element). Reaction conditions (solution pH, reaction temperature, sorbent dosage, and contact time) are of critical importance for the removal performance of contaminants onto OMC. In addition, the pristine and modified OMC have been investigated for the removal of a range of contaminants, including cationic/anionic toxic elements and organic contaminants (synthetic dye, phenol, and others), and involving different and specific mechanisms of interaction with contaminants. The future research directions of the application of pristine and modified OMC were proposed. Overall, this review can provide sights into the modification techniques of OMC for removal of environmental contaminants.

Highly efficient removal of imidacloprid using potassium hydroxide activated magnetic microporous loofah sponge biochar

Extensive application of imidacloprid (IMI) in pest control and its undesirable removal efficiency enabled it to be a critical global challenge. Low cost, efficient, sustainable and environment-friendly technologies are urgently needed to be developed to remove IMI from water. A novel adsorbent of potassium hydroxide activated magnetic microporous loofah sponge biochar (KOH+Fe/Zn-LBC) was synthesized, as well as its adsorption capacity and mechanisms for IMI were investigated in this study. KOH+Fe/Zn-LBC had the superior pore structure (surface area and pore volume) and its maximum adsorption capacity for IMI could reach 738 mg g^-1 at 298 K. Kinetics, isotherms, thermodynamics and characterization analysis suggested that pore filling, hydrogen bonding and π-π conjugation were its main adsorption mechanisms. Additionally, the thermodynamic parameters described that IMI adsorption was a spontaneous, endothermic and less random process. Particularly, the magnetic separation of KOH+Fe/Zn-LBC was beneficial for its reuse. Ultrasound and ethanol co-processing could effectively regenerate the used KOH+Fe/Zn-LBC and maintain its stable sustainable adsorption capacity (99.4% of its fresh adsorption capacity after five reuse cycles). Besides, KOH+Fe/Zn-LBC exhibited a stable adsorption capacity and environmental safety in a wide pH range. Therefore, KOH+Fe/Zn-LBC has the potential to be an efficient, green and sustainable adsorbent for neonicotinoids removal.

Oxygenated functional group-driven spontaneous fabrication of Pd nanoparticles decorated porous carbon nanosheets for electrocatalytic hydrodechlorination of 4-chlorophenol

Researchers have been committed to reducing the hazardous pollutants by developing efficient catalysts while ignoring the pollution caused by the use of toxic surface capping agents, reductants and/or organic solvents in the catalyst preparation process. To alleviate such problems, we here report a novel one-step oxygenated functional group-driven electroless deposition strategy to synthesize clean and uniformly distributed Pd nanoparticles (NPs) using porous carbon nanosheets (PCN) as both substrates and reducing agents. It is observed that the oxygenated functional groups enriched PCN possesses a low work function and allows the spontaneous reduction of PdCl₄^2- ions to Pd NPs deposited on the PCN support (Pd/PCN). The particle size of Pd NPs can be flexibly modulated by simply controlling the immersing time and thereby their maximum catalytic performances can be achieved. Specifically, the optimal Pd/PCN-08 with a Pd loading of 3.0 wt% shows an excellent activity with a turnover frequency of 0.38 min^-1 for electrocatalytic hydrodechlorination (ECH) of 4-chlorophenol (4-CP), superior to the previously reported materials. The stability of Pd/PCN-08 for 4-CP ECH is impressive in repetitive cycles. This work proposes a facile and efficient strategy to synthesize high-performance catalysts for detoxifying the hazardous organic pollutants.

Highly selective electrochemical nitrate reduction using copper phosphide self-supported copper foam electrode: Performance, mechanism, and application

A highly active and selective electrode is essential in electrochemical denitrification. Although the emerging Cu-based electrode has attracted intensive attentions in electrochemical NO₃^- reduction, the issues such as restricted activity and selectivity are still unresolved. In our work, a binder-free composite electrode (Cu₃P/CF) was first prepared by direct growth of copper phosphide on copper foam and then applied to electrochemical NO₃^- reduction. The resulting Cu₃P/CF electrode showed enhanced electrochemical performance for NO₃^- reduction (84.3%) with high N₂ selectivity (98.01%) under the initial conditions of 1500 mg L^-1 Cl^- and 50 mg N L^-1 NO₃^-. The cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) demonstrated that electrochemical NO₃^- reduction was achieved through electron transfer between NO₃^- and Cu⁰ originated from CF. The in-situ grown Cu₃P served as the bifunctional catalyst, the electron mediator or bridge to facilitate the electron-transfer for NO₃^- reduction and the stable catalyst to produce atomic H* toward NO₂^- conversion. Meanwhile, the Cu₃P/CF remained its electrocatalytic activity even after eight cyclic experiments. Finally, a 2-stage treatment strategy, pre-oxidation by Ir-Ru/Ti anode and post-reduction by Cu₃P/CF cathode, was designed for electrochemical chemical oxygen demand (COD) and total nitrogen (TN) removal from real wastewater.

Effective abatement of 29 pesticides in full-scale advanced treatment processes of drinking water: From concentration to human exposure risk

This study investigated the occurrence and removal of 29 pesticides in 4 drinking water treatment plants (DWTPs) with conventional and advanced treatment processes (i.e., ozonation + biological activated carbon, and ultrafiltration) in Shanghai, China from 2018 to 2019. The concentration levels of target pesticides in raw waters ranged from below the limit of quantification (<LOQ) to 2391.3 ng L^-1, whereas in finished waters significantly decreased to a range of <LOQ to 269 ng L^-1. The application of the advanced treatment process could effectively remove target pesticides. For example, the highest removal of isocarbophos after the advanced treatment process reached 94.6%, whereas its removal after the conventional treatment process was just 42.6%. The estimated daily intake level of target pesticides in finished water, which were pretty lower than acceptable daily intake levels in finished water, could be reduced by 67% if combining the conventional and advanced treatment processes. Although the multiple pesticides in raw waters were effectively removed by advanced treatment process, their synergistic toxic effects induced by the residual pesticides and their degradation by-products on human health deserve further attentions.

Biomimetic and Superelastic Silica Nanofibrous Aerogels with Rechargeable Bactericidal Function for Antifouling Water Disinfection

Disinfecting drinking water in a reliable, sustainable, and affordable manner is a great challenge, especially for water contaminated with pathogenic microbes, and traditional water disinfection strategies still suffer from biofouling, irreversible depletion of disinfectants, and energy consumption. In this study, we developed biomimetic and superelastic skeletal-structured silica nanofibrous aerogels (SNAs) with rechargeable bactericidal and antifouling property via the combination of electrospun silica nanofibers and a functional Si-O-Si bonding network. The premise for our design is that the Si-O-Si network comprising rechargeable N-halamine moieties can provide the aerogels with structural stability yet durable bactericidal activity. The resulting aerogels exhibit intriguing properties of high porosity, superhydrophilicity, superelasticity, rechargeable chlorination capability (>4800 ppm), and exceptional bactericidal activity (99.9999%), enabling the aerogels to effectively disinfect the bacteria-contaminated water with ultrahigh flux (57 600 L m^-2 h^-1) and antifouling function. The synthesis of the SNAs opens pathways for exploring antibacterial and antifouling materials in a renewable and nanofibrous form.

Nature and evolution of Pd catalysts supported on activated carbon fibers during the catalytic reduction of bromate in water

Pd/ACF are active catalysts for the bromate reduction and their activity depends on the Pd crystal size with a pseudo-first order kinetic respect to BrO₃⁻ and H₂ partial pressure.