Treatment train approaches for the remediation of per- and polyfluoroalkyl substances (PFAS): A critical review

Effect of electrolyte composition on electrocatalytic transformation of perfluorooctanoic acid (PFOA) in high pH medium

Recent regulatory actions aim to limit per- and polyfluoroalkyl substances (PFAS) concentrations in drinking water and wastewaters. Regenerable anion exchange resin (AER) is an effective separation process to remove PFAS from water but will require PFAS post-treatment of the regeneration wastestream. Electrocatalytic (EC) processes using chemically boron-doped diamond electrodes, stable in a wide range of chemical compositions show potential to defluorinate PFOA in drinking water and wastewater treatments. Chemical composition and concentration of mineral salts in supporting electrolytes affect AER regeneration efficiency, and play a crucial role in the EC processes. Their impact on PFAS degradation remains understudied. This study investigates the impact of 17 brine electrolytes with different compositions on perfluorooctanoic acid (PFOA) degradation in an alkaline medium and explores the correlation between the rate of PFOA degradation and the solution's conductivity. Results show that higher electrolyte concentrations and conductivity lead to faster PFOA degradation rates. The presence of chloride anions have negligible impact on the degradation rate. However, the presence of nitrate salts reduce PFOA degradation efficiency. Additionally, the use of mixed electrolytes may be a promising approach for reducing the cost of EC operations. PFOA degradation was not influenced by the pH of the bulk solution.

Emerging eco-friendly technologies for remediation of Per- and poly-fluoroalkyl substances (PFAS) in water and wastewater: A pathway to environmental sustainability

Per- and polyfluoroalkyl substances (PFAS) are rampant, toxic contaminants from anthropogenic sources, called forever chemicals for their recalcitrance. Although banned in several parts of the world for public health implications, including liver, kidney, and testicular diseases, PFAS are abundant in water sources due to easy dispersion. With chemical properties resulting from strong hydrophobic bonds, they defile many physicochemical removal methods. Though adsorption processes such as granular activated carbon (GAC) are widely used, they are marred by several limitations, including cost and secondary contamination. Thus, eco-friendly methods involving a synergy of the removal principles have been preferred for ease of use, cost-effectiveness, and near-zero effect on the environment. We present novel eco-friendly methods as the solution to PFAS remediation towards environmental sustainability. Current eco-friendly methods of PFAS removal from water sources, including electrocoagulation, membrane/filtration, adsorption, and phytoremediation methods, were highlighted, although with limitations. Novel eco-friendly methods such as microbial fuel cells, photoelectrical cells, and plasma treatment offer solutions to PFAS remediation and are quite efficient in terms of cost, result, and environmental sustainability. Overall, the successful integration of eco-friendly techniques in a seamless manner ensures the desired result. We also present a balanced position on the ecosystem impact of these ecofriendly methods, noting the successes towards environmental sustainability while exposing the gaps for further research.

Cationic surfactant-assisted foam fractionation enhances the removal of short-chain perfluoroalkyl substances from impacted water

Several studies have demonstrated that air-bubbling and foam fractionation techniques can efficiently remove long-chain PFAS from contaminated water. However, removing short-chain PFAS is challenging due to its lower surface activity and inability to form self-assembly structures at the air-water interface. In this study, we tested various additives, including salts, surfactants, and polymers, to improve short-chain PFAS (e.g., perfluorobutanesulfonic acid (PFBS) and perfluorobutanoic acid (PFBA)) removal in non-foaming solutions using a bench-scale system. We found that in the presence of cetyltrimethylammonium chloride (CTAC) and salt, air-bubbling can significantly remove 0.5 μg L-1 of PFBS and PFBA in deionized water by >99% (15 min) and 81% (60 min), respectively. The decline of surface tension and the formation of thin foam-like layers during bubbling, controlled by the concentration of CTAC, significantly improved the removal of short-chain PFAS. Adding anionic and neutral surfactants showed no removal of short-chain PFAS during bubbling, suggesting the importance of the electrostatic interactions between short-chain PFAS and the cationic CTAC. We observed a 1:1 M ratio between CTAC and PFBS removed from the solution, suggesting the formation of ion pairs in the solution and enhancing the surface activity of the overall neutral (PFAS-CTAC) complex. A mass balance of the system revealed that the primary mechanism by which PFAS was removed from non-foaming waters was through aerosol generation (70-100%). Using the optimized condition, PFAS mixtures (short- and long-chain PFAS, including five recently regulated PFAS by USPEA, 2 nM each) in deionized water and natural groundwater were successfully removed to below detection (>99% removal; <2 ng L-1), except for PFBA (25-73% removal). These results provide an improved understanding of the mechanism by which PFAS is removed during foam fractionation and highlight the need for capturing aerosols enriched with PFAS to prevent secondary contamination.

Elucidating the degradation mechanisms of perfluorooctanoic acid and perfluorooctane sulfonate in various environmental matrices: a review of green degradation pathways

Given environmental persistence, potential for bioaccumulation, and toxicity of Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), the scientific community has increasingly focused on researching their toxicology and degradation methods. This paper presents a survey of recent research advances in the toxicological effects and degradation methods of PFOA and PFOS. Their adverse effects on the liver, nervous system, male reproductive system, genetics, and development are detailed. Additionally, the degradation techniques of PFOA and PFOS, including photochemical, photocatalytic, and electrochemical methods, are analyzed and compared, highlighted the potential of these technologies for environmental remediation. The biotransformation pathways and mechanisms of PFOA and PFOS involving microorganisms, plants, and enzymes are also presented. As the primary green degradation pathway for PFOA and PFOS, Biodegradation uses specific microorganisms, plants or enzymes to remove PFOA and PFOS from the environment through redox reactions, enzyme catalysis and other pathways. Currently, there has been a paucity of research conducted on the biodegradation of PFOA and PFOS. However, this degradation technology is promising owing to its specificity, cost-effectiveness, and ease of implementation. Furthermore, novel materials/methods for PFOA and PFOS degradation are presented in this paper. These novel materials/methods effectively improve the degradation efficiency of PFOA and PFOS and provide new ideas and tools for the degradation of PFOA and PFOS. This information can assist researchers in identifying flaws and gaps in the field, which can facilitate the formulation of innovative research ideas.

Lithium-ion battery components are at the nexus of sustainable energy and environmental release of per- and polyfluoroalkyl substances

Lithium-ion batteries (LiBs) are used globally as a key component of clean and sustainable energy infrastructure, and emerging LiB technologies have incorporated a class of per- and polyfluoroalkyl substances (PFAS) known as bis-perfluoroalkyl sulfonimides (bis-FASIs). PFAS are recognized internationally as recalcitrant contaminants, a subset of which are known to be mobile and toxic, but little is known about environmental impacts of bis-FASIs released during LiB manufacture, use, and disposal. Here we demonstrate that environmental concentrations proximal to manufacturers, ecotoxicity, and treatability of bis-FASIs are comparable to PFAS such as perfluorooctanoic acid that are now prohibited and highly regulated worldwide, and we confirm the clean energy sector as an unrecognized and potentially growing source of international PFAS release. Results underscore that environmental impacts of clean energy infrastructure merit scrutiny to ensure that reduced CO2 emissions are not achieved at the expense of increasing global releases of persistent organic pollutants.

Soluble metal porphyrins - Zero-valent zinc system for effective reductive defluorination of branched per and polyfluoroalkyl substances (PFASs)

Nano zero-valent metals (nZVMs) have been extensively utilized for decades in the reductive remediation of groundwater contaminated with chlorinated organic compounds, owing to their robust reducing capabilities, simple application, and cost-effectiveness. Nevertheless, there remains a dearth of information regarding the efficient reductive defluorination of linear or branched per- and polyfluoroalkyl substances (PFASs) using nZVMs as reductants, largely due to the absence of appropriate catalysts. In this work, various soluble porphyrin ligands [[meso‑tetra(4-carboxyphenyl)porphyrinato]cobalt(III)]Cl·7H2O (CoTCPP), [[meso‑tetra(4-sulfonatophenyl) porphyrinato]cobalt(III)]·9H2O (CoTPPS), and [[meso‑tetra(4-N-methylpyridyl) porphyrinato]cobalt(II)](I)4·4H2O (CoTMpyP) have been explored for defluorination of PFASs in the presence of the nZn0 as reductant. Among these, the cationic CoTMpyP showed best defluorination efficiencies for br-perfluorooctane sulfonate (PFOS) (94%), br-perfluorooctanoic acid (PFOA) (89%), and 3,7-Perfluorodecanoic acid (PFDA) (60%) after 1 day at 70 °C. The defluorination rate constant of this system (CoTMpyP-nZn0) is 88-164 times higher than the VB12-nZn0 system for the investigated br-PFASs. The CoTMpyP-nZn0 also performed effectively at room temperature (55% for br-PFOS, 55% for br-PFOA and 25% for 3,7-PFDA after 1day), demonstrating the great potential of in-situ application. The effect of various solubilizing substituents, electron transfer flow and corresponding PFASs defluorination pathways in the CoTMpyP-nZn0 system were investigated by both experiments and density functional theory (DFT) calculations. SYNOPSIS: Due to the unavailability of active catalysts, available information on reductive remediation of PFAS by zero-valent metals (ZVMs) is still inadequate. This study explores the effective defluorination of various branched PFASs using soluble porphyrin-ZVM systems and offers a systematic approach for designing the next generation of catalysts for PFAS remediation.

Roles of varying carbon chains and functional groups of legacy and emerging per-/polyfluoroalkyl substances in adsorption on metal-organic framework: Insights into mechanism and adsorption prediction

Metal-organic frameworks (MOFs) are promising adsorbents for legacy per-/polyfluoroalkyl substances (PFASs), but they are being replaced by emerging PFASs. The effects of varying carbon chains and functional groups of emerging PFASs on their adsorption behavior on MOFs require attention. This study systematically revealed the structure-adsorption relationships and interaction mechanisms of legacy and emerging PFASs on a typical MOF MIL-101(Cr). It also presented an approach reflecting the average electronegativity of PFAS moieties for adsorption prediction. We demonstrated that short-chain or sulfonate PFASs showed higher adsorption capacities (μmol/g) on MIL-101(Cr) than their long-chain or carboxylate counterparts, respectively. Compared with linear PFASs, their branched isomers were found to exhibit a higher adsorption potential on MIL-101(Cr). In addition, the introduction of ether bond into PFAS molecule (e.g., hexafluoropropylene oxide dimeric acid, GenX) increased the adsorption capacity, while the replacement of CF2 moieties in PFAS molecule with CH2 moieties (e.g., 6:2 fluorotelomer sulfonate, 6:2 FTS) caused a decrease in adsorption. Divalent ions (such as Ca2+ and SO42-) and solution pH have a greater effect on the adsorption of PFASs containing ether bonds or more CF2 moieties. PFAS adsorption on MIL-101(Cr) was governed by electrostatic interaction, complexation, hydrogen bonding, π-CF interaction, and π-anion interaction as well as steric effects, which were associated with the molecular electronegativity and chain length of each PFAS. The average electronegativity of individual moieties (named Me) for each PFAS was estimated and found to show a significantly positive correlation with the corresponding adsorption capacity on MIL-101(Cr). The removal rates of major PFASs in contaminated groundwater by MIL-101(Cr) were also correlated with the corresponding Me values. These findings will assist with the adsorption prediction for a wide range of PFASs and contribute to tailoring efficient MOF materials.

Regeneration of exhausted adsorbents after PFAS adsorption: A critical review

The adsorption process efficiently removes per- and polyfluoroalkyl substances (PFAS) from water, but managing exhausted adsorbents presents notable environmental and economic challenges. Conventional disposal methods, such as incineration, may reintroduce PFAS into the environment. Therefore, advanced regeneration techniques are imperative to prevent leaching during disposal and enhance sustainability and cost-effectiveness. This review critically evaluates thermal and chemical regeneration approaches for PFAS-laden adsorbents, elucidating their operational mechanisms, the influence of water quality parameters, and their inherent advantages and limitations. Thermal regeneration achieves notable desorption efficiencies, reaching up to 99% for activated carbon. However, it requires significant energy input and risks compromising the adsorbent's structural integrity, resulting in considerable mass loss (10-20%). In contrast, chemical regeneration presents a diverse efficiency landscape across different regenerants, including water, acidic/basic, salt, solvent, and multi-component solutions. Multi-component solutions demonstrate superior efficiency (>90%) compared to solvent-based solutions (12.50%), which, in turn, outperform salt (2.34%), acidic/basic (1.17%), and water (0.40%) regenerants. This hierarchical effectiveness underscores the nuanced nature of chemical regeneration, significantly influenced by factors such as regenerant composition, the molecular structure of PFAS, and the presence of organic co-contaminants. Exploring the conditional efficacy of thermal and chemical regeneration methods underscores the imperative of strategic selection based on specific types of PFAS and material properties. By emphasizing the limitations and potential of particular regeneration schemes and advocating for future research directions, such as exploring persulfate activation treatments, this review aims to catalyze the development of more effective regeneration processes. The ultimate goal is to ensure water quality and public health protection through environmentally sound solutions for PFAS remediation efforts.

Non-target and target screening and risk assessment of per- and polyfluoroalkyl substances in textile wastewater and receiving river

Textile industry uses varieties of chemicals including per- and polyfluoroalkyl substances (PFAS). PFAS are known to be persistent and incompletely removed in wastewater treatment plants (WWTPs). So far, little is known about what types of PFAS are used in the textile industry and their potential risks. Here we investigated PFAS in two WWTPs and a receiving river of a textile industrial park in Guangxi, China, by using both target and non-target analyses over a two-year period. The target analysis identified 11 specific PFAS, while the non-target analysis revealed a list of 648 different PFAS, including both legacy and emerging substances. Notably, perfluorooctanoic acid (PFOA) was still the most prevalent compound detected. Of particular concern was the finding that the investigated WWTPs, which employs an A/O (Anaerobic/Aerobic) process, exhibited a poor removal efficiency for PFAS. The average removal rate was only 22.0 %, indicating that the current treatment processes are inadequate in effectively mitigating PFAS contamination. Correlation analysis further highlighted the potential for PFAS to be transported from WWTPs to the receiving river, revealing a significant and strong positive correlation between the PFAS in the WWTP effluent and those of the river. Perfluorooctanesulfonic acid (PFOS) and two emerging PFAS (DTXSID30240816 and DTXSID90240817) were identified to have high ecological risks in the receiving river. Notably, these two emerging PFAS are homologues, and their presence in WWTPs has been poorly reported. The findings highlight the wide use and persistence of PFAS in current textile WWTPs, indicating potential long term risks to the receiving environment.

A Porphyrinic Metal-Organic Framework with Cooperative Adsorption Domains for PFAS Removal from Water

The removal of toxic poly- and perfluoroalkyl substances (PFAS) as persistent pollutants from wastewater is imperative but challenging for water remediation. Many adsorbents including activated carbon, biochar, and clay minerals have been investigated for PFAS removal, but most of these materials are faced with high cost or/and low efficiency. The use of metal-organic frameworks (MOFs) as sorbents is attractive for efficient removal of PFAS due to their tailor-made structures and high surface areas. Herein, we synthesized, characterized a water stable Zr-based porphyrinic MOF (PCN-224) with cooperative adsorption domains, and demonstrated its excellent capture performance toward perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS) and perfluorobutane sulfonate (PFBS). PCN-224 has maximum uptake capacities of 963, 517, and 395 mg g-1 for PFOS, PFHxS, and PFBS, respectively, which are much higher than that of granular activated carbon. Moreover, coexistent anions (Cl-, SO4 2-) and humic acid have negligible effects on PFOS adsorption. The excellent adsorption performance of PCN-224 toward PFOS is due to the orthogonal cationic channel pores with a diameter of 1.9 nm, the hydrophobic porphyrin units, and the Zr6 clusters with acidic sites. PCN-224 can be readily regenerated and reused. This work highlights the potential of MOFs with multiple adsorption domains for water remediation.

Biochar and surfactant synergistically enhanced PFAS destruction in UV/sulfite system at neutral pH

The UV/sulfite-based advanced reduction process (ARP) emerges as an effective strategy to combat per- and polyfluoroalkyl substances (PFAS) pollution in water. Yet, the UV/sulfite-ARP typically operates at highly alkaline conditions (e.g., pH > 9 or even higher) since the generated reductive radicals for PFAS degradation can be quickly sequestered by protons (H+). To overcome the associated challenges, we prototyped a biochar-surfactant-system (BSS) to synergistically enhance PFAS sorption and degradation by UV/sulfite-ARP. The degradation and defluorination efficiencies of perfluorooctanoic acid (PFOA) depended on solution pH, and concentrations of surfactant (cetyltrimethylammonium bromide; CTAB), sulfite, and biochar. At high pH (8-10), adding biochar and BSS showed no or even small inhibitory effect on PFOA degradation, since the degradation efficiencies were already high enough that cannot be differentiated. However, at acidic and neutral pH (6-7), an evident enhancement of PFOA degradation and defluorination efficiencies occurred. This is due to the synergies between biochar and CTAB that create favorable microenvironments for enhanced PFOA sorption and deeper destruction by prolonging the longevity of reductive radicals (e.g., SO3•-), which is less affected by ambient pH conditions. The performance of UV/sulfite/BSS was further optimized and used for the degradation of four PFAS. At the optimal experimental condition, the UV/sulfite/BSS system can completely degrade PFOA with >30% defluorination efficiency for up to five continuous cycles (n = 5). Overall, our BSS provides a cost-effective and sustainable technique to effectively degrade PFAS in water under environmentally relevant pH conditions. The BSS-enabled ARP technique can be easily tied into PFAS treatment train technology (e.g., advanced oxidation process) for more efficient and deeper defluorination of various PFAS in water.

Degradation and mechanism of PFOA by peroxymonosulfate activated by nitrogen-doped carbon foam-anchored nZVI in aqueous solutions

Perfluorooctanoic acid (PFOA) is an emerging pollutant that is non-biodegradable and presents severe environmental and human health risks. In this study, we present an effective and mild approach for PFOA degradation that involves the use of nitrogen-doped carbon foam anchored with nanoscale zero-valent iron (nZVI@NCF) to activate low concentration peroxymonosulfate (PMS) for the treatment. The nZVI@NCF/PMS system efficiently removed 84.4% of PFOA (2.4 μM). The active sites of nZVI@NCF including Fe0 (110) and graphitic nitrogen played crucial roles in the degradation. Electrochemical analyses and density functional theory calculations revealed that nZVI@NCF acted as an electronic donor, transferring electrons to both PMS and PFOA during the reaction. By further analyzing the electron paramagnetic resonance and byproducts, it was determined that electron transfer and singlet oxygen were responsible for PFOA degradation. Three degradation pathways involving decarboxylation and surface reduction of PFOA in the nZVI@NCF/PMS system were determined. Finding from this study indicate that nZVI@NCF/PMS systems are effective in degrading PFOA and thus present a promising persulfate-advanced oxidation process technology for PFAS treatment.

Removing polyfluoroalkyl substances (PFAS) from wastewater with mixed matrix membranes

Polyfluoroalkyl and perfluoroalkyl (PFAS) chemicals are fluorinated and exhibit complicated behavior. They are determined and highly resistant to ecological modifications that render plants ecologically robust. Thermal stability and water and oil resistance are examples of material qualities. Their adverse consequences are causing increasing worry due to their bioaccumulative nature in humans and other creatures. Direct data indicates that PFAS exposure in humans causes endocrine system disruption, immune system suppression, obesity, increased cholesterol, and cancer. Several PFASs are present in drinking water at low doses and may harm people. These cancer-causing PFAS have caused concern for water bodies all around the globe. Analytical techniques are used to identify and measure PFAS in an aqueous medium (membrane). Furthermore, a deeper explanation is provided for PFAS removal methods, including mixed matrix membrane (MMM) technology. By removing over 99 % of the PFAS from wastewater, MMMs may effectively remove PFAS from sewage when the support matrix contains adsorbing components. Furthermore, we consider several factors affecting the removal of PFAS and practical sorption methods for PFAS onto various adsorbents.

Recent developments and prospects of sustainable remediation treatments for major contaminants in soil: A review

Rapid industrialisation and urbanisation are contributing to the entry of emerging contaminants into the environment, posing a significant threat to soil health and quality. Therefore, several remediation technologies have been investigated and tested at a field scale to address the issue. However, these remediation technologies face challenges related to cost-effectiveness, environmental concerns, secondary pollution due to the generation of by-products, long-term pollution leaching risks, and social acceptance. Overcoming these constraints necessitates the implementation of sustainable remediation methodologies that prioritise approaches with minimal environmental ramifications and the most substantial net social and economic advantages. Hence, this review delves into diverse contaminants that threaten soil health and quality. Moreover, it outlines the research imperatives for advancing innovative remediation techniques and effective management strategies to tackle this concern. The review discusses a remediation treatment train approach that encourages resource recovery, strengthens the circular economy, and employs a Life Cycle Assessment (LCA) framework to assess the environmental impacts of different remediation strategies. Additionally, the study explores mechanisms to integrate sustainability principles into soil remediation practices. It underscores the necessity for a comprehensive and systematic approach that takes into account the economic, social, and environmental consequences of remediation methodologies in the development of sustainable solutions.

Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) in water and edible fish species of Karun River, Ahvaz, Iran: spatial distribution, human health, and ecological risk assessment

Per- and polyfluoroalkyl substances (PFASs) such as perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are environmental contaminants with unfavorable impacts on human health and nature. This study aimed to determine the PFOA and PFOS concentration in water and fish samples from Karun, the largest river in Iran. According to the results, the PFOA and PFOS in water samples were 5.81-69.26 ng/L and not detected (n.d.)-35.12 ng/L, respectively. The dry season displayed higher concentrations in water samples than in the wet season. The maximum PFOS concentration measured was related to Barbus barbules sp. (27.89 ng/g). The human health risk assessment indicated minor risks (hazard ratio, HR < 1) from PFOA and PFOS through consuming contaminated drinking water and fish. Only HR value of PFOS in downstream area exceeded slightly 1.0, indicating potential health risk due to consumption of the river fish. Considering the average PFASs concentration, the risk quotients (RQs) showed low ecological risk.

The role of helicity in PFAS resistance to degradation: DFT simulation of electron capture and defluorination

Defluorination of perfluorinated alkyl substances (PFASs) via the direct capture of excess electrons poses a promising path to environmental decontamination. Herein we show that quantum-chemical model optimization methods can be adapted to simulate the changes to molecular geometry that result from electron capture. These reaction pathways demonstrate that the introduction of an additional electron causes a loss of the helical arrangement along linear carbon tail chains. Regaining helicity is sufficiently favourable to enable fluoride release in C7-C10 PFAS chains; shorter chains are enthalpically hindered from degradation while the additional charge is stabilized on longer chains by the greater entropy their flexibility permits. These results suggest that reductive PFAS treatment processes could be made more effective under high pressure or confined conditions.

Adsorption of per- and polyfluoroalkyl substances (PFAS) by ionic liquid-modified clays: Effect of clay composition and PFAS structure

Organically modified clays have been reported as a promising class of adsorbents for the treatment of per- and polyfluoroalkyl substances (PFAS), a group of emerging contaminants of widespread concerns. Here, we reported the development and evaluation of ionic liquid (IL)-modified clays prepared with various natural clays to explore the role of clay substrate in the adsorption of eight persistent perfluoroalkyl acids (PFAAs). Based on detailed adsorption isotherm study, we found that the adsorption capacities of PFAAs were closely related to the cation exchange capacities of the raw clays and correspondingly the IL loadings of the modified clays. Additionally, a positive correlation was observed between the adsorption affinity of PFAAs onto IL-modified clays and the octanol-water distribution coefficient (Dow) of PFAAs. Adsorption free energy analysis suggested that both electrostatic and hydrophobic interactions played important roles in the adsorption of PFAAs onto IL-modified clays. Although electrostatic interactions were more predominant, the contribution of hydrophobic interactions increased with the increasing carbon number of perfluoroalkyl moiety of PFAAs, resulting in more favorable adsorption of long-chain PFAAs than their short-chain homologs. The performance of IL-modified clays was further demonstrated for the removal of PFAA mixtures under environmentally relevant conditions. Overall, results of this work can provide important insights into guiding the design of organically modified clay adsorbents for PFAS treatment.

Is it raining PFAS in France? An analysis of 52 PFAS at nanogram per liter levels in French rainwaters during autumn season

Per- and polyfluoroalkyl substances (PFAS) are of increasing concern due to their pervasive nature, high persistence, and their impacts on human health and the environment. Many studies have attempted to assess the presence of PFAS along the water cycle, but few have analyzed rainwater PFAS content and its contribution to water contamination. The present study aims to improve knowledge by providing the first analysis of PFAS rainwater samples from France. A total of 52 PFAS were analyzed at nanogram per liter levels in rainwater samples collected in 14 locations in France using a cutting-edge liquid chromatography-tandem mass spectrometry (LC/MS/MS) method for multiresidue determination. Depending on the quantity of rainwater collected, the PFAS concentrations were analyzed either by direct injection or after solid-phase extraction (SPE), allowing to quantify 20 PFAS with a limit of quantification (LOQ) ≤ 100 ng/L and 52 PFAS with a LOQ ≤ 1 ng/L, respectively. For the five locations for which the collected samples were analyzed by direct injection, no PFAS could be detected (i.e., their concentrations in the samples were below the LOQs of the method). The samples from four locations out of the nine analyzed by SPE-LC/MS/MS show results above the method's LOQs for up to 10 PFAS. Among the quantified PFAS, three compounds (perfluorononanoic acid, perfluoroundecanoic acid, and perfluorohexanoic acid) have been found to be of most significance. These results bring out the presence of PFAS in rainwater samples in France, highlighting the need for PFAS environmental surveillance and risk assessment and the necessity of continuous improvement of existing analysis methods.

Removal of typical PFAS from water by covalent organic frameworks with different pore sizes

Adsorption is highly effective and desirable for the removal of per- and polyfluoroalkyl substances (PFAS) from water, and suitable pore size of porous adsorbents is important for efficient removal of PFAS, but the relationship between adsorbent pore size and PFAS adsorption remains unclear. In this study, five regular covalent organic frameworks (COFs) with distinct pore sizes were successfully synthesized, and the correlation between the pore size of COFs and PFAS length for efficient PFAS adsorption was investigated. Both excessively small and large pore sizes of COFs are not conducive to the efficient adsorption of PFAS due to the diffusion hindrance and weak binding forces. The COFs with a pore size ranging from 2.5 to 4.0 times of the PFAS molecular size demonstrated the most suitable for PFAS adsorption. This study also investigated the potential impact of nanobubbles on PFAS adsorption on orderly porous COFs through aeration and degassing treatment of the adsorption system. The bubbles on hydrophobic COFs were verified to be responsible for PFAS adsorption, another important adsorption mechanism of PFAS on COFs. The long-chain PFAS have stronger enrichment at the gas-liquid interface than the short-chain PFAS, resulting in higher adsorption capacity for long-chain PFAS.

A ReaxFF-based molecular dynamics study of the destruction of PFAS due to ultrasound

This work uses a computational approach to provide a mechanistic explanation for the experimentally observed destruction of per- and polyfluoroalkyl substances (PFAS) in water due to ultrasound. The PFAS compounds have caused a strong public and regulatory response due to their ubiquitous presence in the environment and toxicity to humans. In this research, ReaxFF -based Molecular Dynamics simulation under several temperatures ranging from 373 K to 5,000 K and different environments such as water vapor, O2, N2, and air were performed to understand the mechanism of PFAS destruction. The simulation results showed greater than 98% PFAS degradation was observed within 8 ns under a temperature of 5,000 K in a water vapor phase, replicating the observed micro/nano bubbles implosion and PFAS destruction during the application of ultrasound. Additionally, the manuscript discusses the reaction pathways and how PFAS degradation evolves providing a mechanistic basis for the destruction of PFAS in water due to ultrasound. The simulation showed that small chain molecules C1 and C2 fluoro-radical products are the most dominant species over the simulated period and are the impediment to an efficient degradation of PFAS. Furthermore, this research confirms the empirical findings observations that the mineralization of PFAS molecules occurs without the generation of byproducts. These findings highlight the potential of virtual experiments in complementing laboratory experiments and theoretical projections to enhance the understanding of PFAS mineralization during the application of ultrasound.

Contributions of reactor geometry and ultrasound frequency on the efficieny of sonochemical reactor

An intermediate-scale reactor with 10L capacity and two transducers operating at 700 and 950 kHz frequencies was developed to study the scalability of the sonolytic destruction of Per and Polyfluoroalkyl substance (PFAS). The impact of frequency, height of liquid or power density, and transducer position on reactor performance was evaluated with the potassium iodide (KI) oxidation and calorimetric power. The dual frequency mode of operation has a synergistic effect based on the triiodide concentration, and calorimetric power. The triiodide concentration, and calorimetric power were higher in this mode compared to the combination of both frequencies operating individually. The sonochemical efficiency for an intermediate-scale reactor (10L) was similar that obtained from a bench-scale reactor (2L), showing the scalability of the sonolytic technology. The placement of the transducer at the bottom or side wall of the reactor had no significant impact on the sonochemical reactivity. The superposition of the ultrasonic field from the dual transducer mode (side and bottom) did not produce a synergistic effect compared to the single transducer mode (bottom or side). This can be attributed to a disturbance due to the interaction of ultrasonic fields of two frequencies from each transducer. With the encouraging results scaling up is in progress for site implementation.

Association of perfluoroalkyl and polyfluoroalkyl substances with sex hormones in children and adolescents 6-19 Years of age

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) have raised concerns regarding sex hormones homeostasis disruption in critical windows including childhood and adolescence, but epidemiological evidence is limited. We aimed to explore the associations of total testosterone (TT), estradiol (E₂), and sex hormone binding globulin (SHBG) in children and adolescents with PFAS in 921 participants 6-19 years of age from NHANES 2013 to 2016. Multiple linear regression models and Bayesian Kernel Machine Regression (BKMR) models stratified by sex-age and sex-puberty-status groups were performed to explore the associations of the associations of individual or mixture of PFAS with sex hormone levels, respectively. Inverse associations were observed between n-PFOA and SHBG in female adolescents when the exposure was modeled as continuous (β = -0.20, 95% CI -0.33, -0.07) or categorized variable (P for trend = 0.005). In children, inverse associations were observed by BKMR in 6-11-year-old girls of high concentration, and in boys of low concentration of the PFAS mixture with TT. A positive association of PFAS mixture with SHBG was observed in boys. PFOS and PFNA were identified as major contributors to the associations in girls and boys, respectively. Although the 95% credible intervals included the null in adolescents, suggestive negative associations of PFAS mixture with TT and SHBG levels in adolescents aged 12-19 years were found by BKMR. Results by sex-puberty status presented a similar pattern, where significantly inverse associations between PFAS mixture and E₂ were observed in the pubertal. Our findings suggested the associations of either individual or mixture PFAS with decreased TT levels, and increased SHBG levels in U.S. children and adolescents, and with decreased E₂ levels in pubertal individuals. The associations were evident in children.

Comparison of PFAS soil remediation alternatives at a civilian airport using cost-benefit analysis

Contamination of soil and water systems by per- and polyfluoroalkyl substances (PFAS) due to uncontrolled use of aqueous film-forming foams (AFFFs) at firefighting training sites at civilian and military airports is a universal issue and can lead to significant human health and environmental impacts. Remediation of these sites is often complex but necessary to alleviate the PFAS burden and minimise the risks of exposure by eliminating the hotspot/source from which the PFAS spreads. This study presents a probabilistic cost-benefit analysis (CBA) for evaluating PFAS remediation alternatives, which includes monetisation of both direct costs and benefits as well as externalities. The method is applied for a case study to compare five remediation alternatives for managing PFAS contaminated soil at Stockholm Arlanda Airport in Sweden. The social profitability, or the net present value (NPV), of each remediation alternative was calculated in comparison to two reference alternatives - 'total excavation' of the site (Alt 0) or 'do nothing'. Sensitivity analyses and model scenarios were tested to account for uncertainties, including small or large PFAS spreading and simulating different values for the magnitude of annual avoided cost of inaction (i.e., aggregate benefit) from PFAS remediation. In comparison to total excavation, four of the five studied remediation alternatives resulted in a positive mean NPV. Excavation and stabilization/solidification of the hotspot on-site combined with stabilization using activated carbon for the rest of site (Alt 2) had the highest NPV for both spreading scenarios, i.e., Alt 2 was the most socially profitable alternative. Simulations of the annual avoided cost of inaction enabled estimation of the breakeven point at which a remediation alternative becomes socially profitable (NPV > 0) compared to 'do nothing'. Alt 2 had the lowest breakeven point: 7.5 and 5.75 millions of SEK/year for large and small spreading, respectively.

Research Updates on the Mechanism and Influencing Factors of the Photocatalytic Degradation of Perfluorooctanoic Acid (PFOA) in Water Environments

Perfluorooctanoic acid is ubiquitous in water bodies and is detrimental to the health of organisms. Effectively removing perfluorooctanoic acid (PFOA), a persistent organic pollutant, has been a hot topic around the world. With traditional physical, chemical, and biological methods, it is difficult to effectively and completely remove PFOA, the costs are high, and it is easy to cause secondary pollution. There are difficulties in applying some technologies. Therefore, more efficient and green degradation technologies have been sought. Photochemical degradation has been shown to be a low-cost, efficient, and sustainable technique for PFOA removal from water. Photocatalytic degradation technology offers great potential and prospects for the efficient degradation of PFOA. Most studies on PFOA have been conducted under ideal laboratory conditions at concentrations that are higher than those detected in real wastewater. This paper summarizes the research status of the photo-oxidative degradation of PFOA, and it summarizes the mechanism and kinetics of PFOA degradation in different systems, as well as the influence of key factors on the photo-oxidative degradation and defluoridation process, such as system pH, photocatalyst concentration, etc. PFOA photodegradation technology's existing problems and future work directions are also presented. This review provides a useful reference for future research on PFOA pollution control technology.

Electroreductive Defluorination of Unsaturated PFAS by a Quaternary Ammonium Surfactant-Modified Cathode via Direct Cathodic Reduction

Remediation of per- and polyfluoroalkyl substances (PFAS) in groundwater remains a technological challenge due to the trace concentrations of PFAS and the strength of their C-F bonds. This study investigated an electroreductive system with a quaternary ammonium surfactant-modified cathode for degrading (E)-perfluoro(4-methylpent-2-enoic acid) (PFMeUPA) at a low cathodic potential. A removal efficiency of 99.81% and defluorination efficiency of 78.67% were achieved under -1.6 V (vs Ag/AgCl) at the cathode modified by octadecyltrimethylammonium bromide (OTAB). The overall degradation procedure started with the adsorption of PFMeUPA onto the modified cathode. This adsorption process was promoted by hydrophobic and electrostatic interactions between the surfactants and PFMeUPA, of which the binding percentage, binding mode, and binding energy were determined via molecular dynamics (MD) simulations and density functional theory (DFT) calculations. The step-wise degradation pathway of PFMeUPA, including reductive defluorination and hydrogenation, was derived. Meanwhile, C-F bond breaking with direct electron transfer only was achieved for the first time in this study, which also showed that the C═C bond structure of PFAS facilitates the C-F cleavage. Overall, this study highlights the crucial role of quaternary ammonium surfactants in electron transfer and electrocatalytic activities in the electroreductive system and provides insights into novel remediation approaches on PFAS-contaminated groundwater.

Perfluoroalkyl acid transformation and mitigation by nNiFe-activated carbon nanocomposites in steady-state flow column studies

The ongoing contamination of groundwater with per- and polyfluoroalkyl substances (PFAS) has resulted in a global and rapidly growing interest in PFAS groundwater remediation. Preferred technologies that lead to PFAS destruction are often limited by not addressing all PFAS, being energy-intensive or not being suited for in-situ application. We developed nNiFe-activated carbon (AC) nanocomposites and demonstrated varying degrees of PFAS reduction and fluoride generation with these nanocomposites in batch reactors for several PFAS. Here we explore nNiFe-AC's effectiveness to transform perfluoroalkyl acid acids (PFAAs) under steady-state flow (0.0044 to 0.15 mL/min) in nNiFe-AC:sand packed columns. Column experiments included, two perfluorooctane sulfonate (PFOS) in deionized water and two PFAA mixtures in deionized water or bicarbonate buffer containing five perfluoroalkyl carboxylates (PFCAs, C5-C9) and three perfluoroalkyl sulfonates (PFSAs, C4, C6 and C8) at temperatures of 50 or 60°C were evaluated. PFOS transformation was similar in PFOS-only and PFAA mixture column experiments. Overall, % PFAA transformation under flow conditions exceeded what we observed previously in batch reactors with up to 53% transformation of a PFAA mixture with ∼ 8% defluorination. Longer chain PFAS dominated the PFAAs transformed and a bicarbonate matrix appeared to reduce overall transformation. PFAA breakthrough was slower than predicted from only sorption due to transformation; some longer chain PFAS like PFOS did not breakthrough. Here, nNiFe-AC technology with both in-situ and ex-situ potential application was shown to be a plausible part of a treatment train needed to address the ongoing challenge for cleaning up PFAS-contaminated waters.

Influence of microplastics on the photodegradation of perfluorooctane sulfonamide (FOSA)

PFAS (per- and polyfluoroalkyl substances) are omnipresent in the environment and their transportation and transformation have attracted increased attention. Microplastics are another potential risk substances that can serve as a carrier for ubiquitous pollutants, thus affecting the presence of PFAS in the environment. In this study, the adsorption of perfluorooctane sulfonamide (FOSA) and perfluorooctanoic acid (PFOA) on four microplastics (PE, PVC, PS, and PTFE) and their effect on the photodegradation of FOSA were studied. The adsorption capacity of FOSA by PS was the highest, in similar, PS displayed the highest adsorption capacity in the presence of PFOA. Different effects of pH and salinity on the adsorption of FOSA and PFOA were observed among different microplastics indicating inconsistent interaction mechanisms. Furthermore, FOSA could be photodegraded, with PFOA as the main product, while the presence of microplastics had a negligible effect on the degradation of this contaminant. The results indicated that microplastics could act as PFAS concentrators. Moreover, their photochemical inertias make the pollutants enriched on microplastics more resistant to degradation.

Combination of adsorption/desorption and photocatalytic reduction processes for PFOA removal from water by using an aminated biosorbent and a UV/sulfite system

Per- and polyfluoroalkyl substances (PFAS) are stable organic chemicals, which have been used globally since the 1940s and have caused PFAS contamination around the world. This study explores perfluorooctanoic acid (PFOA) enrichment and destruction by a combined method of sorption/desorption and photocatalytic reduction. A novel biosorbent (PG-PB) was developed from raw pine bark by grafting amine groups and quaternary ammonium groups onto the surface of bark particles. The results of PFOA adsorption at low concentration suggest that PG-PB has excellent removal efficiency (94.8%-99.1%, PG-PB dosage: 0.4 g/L) to PFOA in the concentration range of 10 μg/L to 2 mg/L. The PG-PB exhibited high adsorption efficiency regarding PFOA, being 456.0 mg/g at pH 3.3 and 258.0 mg/g at pH 7 with an initial concentration of 200 mg/L. The groundwater treatment reduced the total concentration of 28 PFAS from 18 000 ng/L to 9900 ng/L with 0.8 g/L of PG-PB. Desorption experiments examined 18 types of desorption solutions, and the results showed that 0.05% NaOH and a mixture of 0.05% NaOH + 20% methanol were efficient for PFOA desorption from the spent PG-PB. More than 70% (>70 mg/L in 50 mL) and 85% (>85 mg/L in 50 mL) of PFOA were recovered from the first and second desorption processes, respectively. Since high pH promotes PFOA degradation, the desorption eluents with NaOH were directly treated with a UV/sulfite system without further adjustment. The final PFOA degradation and defluorination efficiency in the desorption eluents with 0.05% NaOH + 20% methanol reached 100% and 83.1% after 24 h reaction. This study proved that the combination of adsorption/desorption and a UV/sulfite system for PFAS removal is a feasible solution for environmental remediation.

Per- and polyfluoroalkyl substances (PFAS) distribution in landfill gas collection systems: leachate and gas condensate partitioning

While per- and polyfluoroalkyl substances (PFAS) have been reported extensively in municipal solid waste (MSW) landfill leachate,they have rarely been quantified in landfill gas or in discrete landfill liquids such as landfill gas condensate (LGC), and the potential for PFAS to partition to the condensate has not been reported. LGC and leachate collected from within gas wells known as gas well pump-out (GWP) from three MSW landfills underwent physical-chemical characterization and PFAS analysis to improve understanding of the conditions under which these liquids form and to illuminate PFAS behavior within landfills. LGC was observed to be clear liquid containing ammonia and alkalinity while GWP strongly resembled leachate - dark in color, high in chloride and ammonia. Notably, arsenic and antimony were found in concentrations exceeding regulatory thresholds by over two orders of magnitude in many LGC samples. LGC contained a lower average concentration of ΣPFAS (19,000 ng L) compared to GWP (56,000 ng L); however, LGC contained more diversity of PFAS, with 53 quantified compared to 44 in GWP. LGC contained proportionally more precursor PFAS than GWP, including more semi-volatile PFAS which are rarely measured in water matrices, such as fluorotelomer alcohols and perfluoroalkane sulfonamido ethanols. This study provides the first detailed comparison of these matrices to inform timely leachate management decisions.

Insights into the circadian rhythm alterations of the novel PFOS substitutes F-53B and OBS on adult zebrafish

As alternatives to perfluorooctane sulfonate (PFOS), 6:2 Cl-PFESA (F-53B) and sodium p-perfluorous nonenoxybenzene sulfonate (OBS) are frequently detected in aquatic environments, but little is known about their neurotoxicity, especially in terms of circadian rhythms. In this study, adult zebrafish were chronically exposed to 1 μM PFOS, F-53B and OBS for 21 days taking circadian rhythm-dopamine (DA) regulatory network as an entry point to comparatively investigate their neurotoxicity and underlying mechanisms. The results showed that PFOS may affect the response to heat rather than circadian rhythms by reducing DA secretion due to disruption of calcium signaling pathway transduction caused by midbrain swelling. In contrast, F-53B and OBS altered the circadian rhythms of adult zebrafish, but their mechanisms of action were different. Specifically, F-53B might alter circadian rhythms by interfering with amino acid neurotransmitter metabolism and disrupting blood-brain barrier (BBB) formation, whereas OBS mainly inhibited canonical Wnt signaling transduction by reducing cilia formation in ependymal cells and induced midbrain ventriculomegaly, finally triggering imbalance in DA secretion and circadian rhythm changes. Our study highlights the need to focus on the environmental exposure risks of PFOS alternatives and the sequential and interactive mechanisms of their multiple toxicities.

Electrochemical Oxidation for Treatment of PFAS in Contaminated Water and Fractionated Foam-A Pilot-Scale Study

Per- and polyfluoroalkyl substances (PFAS) are persistent synthetic contaminants that are present globally in water and are exceptionally difficult to remove during conventional water treatment processes. Here, we demonstrate a practical treatment train that combines foam fractionation to concentrate PFAS from groundwater and landfill leachate, followed by an electrochemical oxidation (EO) step to degrade the PFAS. The study combined an up-scaled experimental approach with thorough characterization strategies, including target analysis, PFAS sum parameters, and toxicity testing. Additionally, the EO kinetics were successfully reproduced by a newly developed coupled numerical model. The mean total PFAS degradation over the designed treatment train reached 50%, with long- and short-chain PFAS degrading up to 86 and 31%, respectively. The treatment resulted in a decrease in the toxic potency of the water, as assessed by transthyretin binding and bacterial bioluminescence bioassays. Moreover, the extractable organofluorine concentration of the water decreased by up to 44%. Together, these findings provide an improved understanding of a promising and practical approach for on-site remediation of PFAS-contaminated water.

Effective PFAS degradation by electrochemical oxidation methods-recent progress and requirement

The presence of per- and poly-fluoroalkyl substances (PFASs) in water is of global concern due to their high stability and toxicity even at very low concentrations. There are several technologies for the remediation of PFASs, but most of them are inadequate either due to limited effectiveness, high cost, or production of a large amount of sludge. Electrochemical oxidation (EO) technology shows great potential for large-scale application in the degradation of PFASs due to its simple procedure, low loading of chemicals, and least amount of waste. Here, we have reviewed the recent progress in EO methods for PFAS degradation, focusing on the last 10 years, to explore an efficient, cost-effective, and environmentally benign remediation technology. The effects of important parameters (e.g., anode material, current density, solution pH, electrolyte, plate distance, and electrical connector type) are summarized and evaluated. Also, the energy consumption, the consequence of different PFASs functional groups, and water matrices are discussed to provide an insight that is pivotal for developing new EO materials and technologies. The proposed degradation pathways of shorter-chain PFAS by-products during EO of PFAS are also discussed.

Ultrasound-enhanced Magnéli phase Ti4O7 anodic oxidation of per- and polyfluoroalkyl substances (PFAS) towards remediation of aqueous film forming foams (AFFF)

Per-and polyfluoroalkyl substances (PFAS) remediation is still a challenge. In this study, we propose a hybrid system that combines electrochemical treatment with ultrasound irradiation, aiming for an enhanced degradation of PFAS. Equipped with a titanium suboxide (Ti₄O₇) anode, the electrochemical cell is able to remove perfluorooctanoic acid (PFOA) effectively. Under the optimal conditions (50 mA/cm² current density, 0.15 M Na₂SO₄ supporting electrolyte, and stainless steel/Ti₄O₇/stainless steel electrode configuration with a gap of ∼10 mm), the electrochemical process achieves ∼100 % PFOA removal and 43 % defluorination after 6 h. Applying ultrasound irradiation (130 kHz) alone offers a limited PFOA removal, with 33 % PFOA removal and 5.5 % defluorination. When the electrochemical process is combined with ultrasound irradiation, we observe a significant improvement in the remediation performance, with ∼100 % PFOA removal and 63.5 % defluorination, higher than the sum of 48.5 % (43 % achieved by the electrochemical process, plus 5.5 % by the ultrasound irradiation), implying synergistic removal/oxidation effects. The hybrid system also consistently shows the synergistic defluorination during degradation of other PFAS and the PFAS constituents in aqueous film forming foam (AFFF). We attribute the synergistic effect to an activated/cleaned electrode surface, improved mass transfer, and enhanced production of radicals.

Two-in-one platform based on conjugated polymer for ultrasensitive ratiometric detection and efficient removal of perfluoroalkyl substances from environmental water

Continuous emergence of persistent organic pollutants perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) in various water bodies around the world poses a serious threat to the global ecosystem. The exploration of advanced detection/removal techniques to monitor/treat such type of toxicants is urgently required. Herein, we unveiled a donor-acceptor type conjugated polymer PF-DBT-Im as a first-of-its-kind ratiometric fluorescent probe for visual, amplified, and specific monitoring of PFOA and PFOS with ultra-low detection limits of 6.12 nM (PFOA) and 14.3 nM (PFOS), respectively. PF-DBT-Im undergoes strong aggregation after binding with PFOA/PFOS as evident by transmission electron microscopy, zeta potential measurements, and dynamic light scattering studies. This promotes interchain Förster resonance energy transfer process to endorse an obvious emission color change from blue-to-magenta under ultraviolet lamp excitation. Consequently, a smartphone-integrated portable device is fabricated for realizing rapid and on-site detection of PFOA/PFOS. Besides, a new class of magnetic adsorbent Fe₃O₄@NH₂&F₁₃ is also prepared and used in combination with PF-DBT-Im to remove PFOA/PFOS from the environmental water effectively and rapidly as confirmed by liquid chromatography-mass spectrometry analysis. Thus, utilizing the excellent signal amplification property of PF-DBT-Im and the remarkable magnetic separation capability of Fe₃O₄@NH₂&F₁₃, a multifunctional system is developed for step-wise recognition and separation of PFOA/PFOS from the environmental water proficiently and rapidly.

Tricks and tracks in waste management with a special focus on municipal landfill leachate: Leads and obstacles

Landfilling is the most widely used disposal method for municipal solid waste around the world. The main disadvantage of this strategy is formation of leachate, among other aspects. Landfill leachate contains highly toxic and bio-refractory substances that are detrimental to the environment and human health. Hence, the risk(s) of discharging potentially harmful landfill leachate into the environment need to be assessed and measured in order to make effective choices about landfill leachate management and treatment. In view of this, the present review aims to investigate (a) how landfill leachate is perceived as an emerging concern, and (b) the stakeholders' mid- to long-term policy priorities for implementing technological and integrative solutions to reduce the harmful effects of landfill leachate. Because traditional methods alone have been reported ineffective, and in response to emerging contaminants and stringent regulations, new effective and integrated leachate treatments have been developed. This study gives a forward-thinking of the accomplishments and challenges in landfill leachate treatment during the last decade. It also provides a comprehensive compilation of the formation and characterization of landfill leachate, the geo-environmental challenges that it raises, as well as the resource recovery and industrial linkage associated with it in order to provide an insight into its sustainable management.

Effect of two sorbents on the distribution and transformation of N-ethyl perfluorooctane sulfonamido acetic acid (N-EtFOSAA) in soil-soybean systems

The broad application of perfluoroalkyl acid (PFAA) precursors has led to their occurrence in soil, resulting in potential uptake and bioaccumulation in plants. In this study, we investigated the effect of powdered activated carbon (PAC) and montmorillonite on the distribution and transformation of a perfluorooctanesulfonic acid (PFOS) precursor, N-ethyl perfluorooctane sulfonamido acetic acid (N-EtFOSAA), in soil-plant systems. The results showed that N-EtFOSAA at 300 μg/kg was taken up by soybean roots and shoots together with its transformation products (i.e., perfluorooctane sulfonamide (PFOSA), PFOS), while decreasing the biomass of shoots and roots by 47.63% and 61.16%, respectively. PAC amendment significantly reduced the water leachable and methanol extractable N-EtFOSAA and its transformation products in soil. In the presence of soybean and after 60 days, 73.5% of the initially spiked N-EtFOSAA became non-extractable bound residues. Compared to the spiked controls, the PAC addition also decreased the total plant uptake of N-EtFOSAA by 94.96%. In contrast, montmorillonite showed limited stabilization performance for N-EtFOSAA and its transformation products and was ineffective to lower their bioavailability. Overall, the combination of PAC and soybean was found to be effective in immobilizing N-EtFOSAA in soil.

The role of PFAS in unsettling ocean carbon sequestration

Poly- and perfluoroalkyl substances (PFAS) and global climate change have attracted worldwide attention. PFAS have been found all across the planet, from the polar regions to the global ocean. Global oceans have emerged as a substantial sink for the carbon in the environment due to their remarkable capacity to absorb atmospheric carbon. Oceans absorb around 24% of the world's CO₂ emissions. Thus, the ocean plays a prominent role in the earth's carbon cycle. However, the widespread application of PFAS in a wide range of products and the inefficient management of PFAS-containing wastes made them ubiquitous pollutants, which are increasingly getting as a pollutant of emerging concern. Marine PFAS pollutants can produce harmful effects on gas exchange and the ocean's carbon cycle. Thus, it leads to an increase in greenhouse gas emissions, which eventually adversely affects global warming and climate change. Consequently, threats of marine PFAS to oceans carbon sequestration are discussed in this paper. Marine PFAS pollutants adversely affect the following sectors: (1) The growth and photosynthesis of phytoplankton, (2) development and reproduction of zooplankton by causing toxicity in zooplankton, (3) marine biological pomp, and (4) carbon stock of oceans. In this way, marine PFAS can pose a threat to ocean carbon sequestration. It is expected that this study can develop knowledge about the potential impact of PFAS on ocean carbon sequestration. However, the need for further research to investigate the hidden dimensions of this issue, including the potential scope and scale of this impact, should not be overlooked.

Toxicity of Per- and Polyfluoroalkyl Substances to Aquatic Invertebrates, Planktons, and Microorganisms

Per- and polyfluoroalkyl substances (PFASs), recognized worldwide as emerging pollutants, may pose a substantial threat to human health and our environment due to their stability, high concentrations, wide distribution, and easy accumulation. Ever since perfluorooctane sulfonate and perfluorooctanoic acid were recognized by the Stockholm Convention on Persistent Organic Pollutants, the public has become increasingly concerned about potential contamination and the environmental risks associated with PFASs. Ubiquitous PFAS contamination of drinking water, groundwater, surface water, and sediment has been detected, especially in areas with rapid industrial and economic development. Its accumulation in living organisms and foods has accentuated the importance of investigations into aquatic organisms at the bottom of the food chain, as the stability and integrity of the food web as well as the population quantity and structure of the aquatic ecosystem may be affected. This review provides a comprehensive summary of the toxic and toxicity-related effects of PFASs on aquatic plankton, aquatic invertebrates and microorganisms, the characteristics of different target aquatic organisms in toxicity investigations, and a feasibility evaluation of PFAS substitutes to provide valuable suggestions for further utilization and regulation of PFASs and their substitutes.

Atomistic insights into the hydrodefluorination of PFAS using silylium catalysts

Fluorochemicals are a persistent environmental contaminant that require specialized techniques for degradation and capture. In particular, recent attention on per- and poly-fluoroalkyl substances (PFAS) has led to numerous explorations of different techniques for degrading the super-strong C-F bonds found in these fluorochemicals. In this study, we investigated the hydrodefluorination mechanism using silylium-carborane salts for the degradation of PFAS at the density functional theory (DFT) level. We find that the degradation process involves both a cationic silylium (Et₃Si⁺) and a hydridic silylium (Et₃SiH) to facilitate the defluorination and hydride-addition events. Additionally, the role of carborane ([HCB₁₁H₅F₆]^-) is to force unoccupied anti-bonding orbitals to be partially occupied, weakening the C-F bond. We also show that changing the substituents on carborane from fluorine to other halogens weakens the C-F bond even further, with iodic carborane ([HCB₁₁H₅I₆]^-) having the greatest weakening effect. Moreover, our calculations reveal why the C-F bonds are resistant to degradation, and how the silylium-carborane chemistry is able to chemically transform these bonds into C-H bonds. We believe that our results are further applicable to other halocarbons, and can be used to treat either our existing stocks of these chemicals or to treat concentrated solutions following filtration and capture.

Sources, occurrence, and treatment techniques of per- and polyfluoroalkyl substances in aqueous matrices: A comprehensive review

Per- and polyfluoroalkyl substances (PFAS), a class of synthetic organic pollutants, have prompted concerns about their global prevalence and possible health effects. This review consolidates the most recent data on different aspects of PFAS, such as their occurrence, and prominent sources. The current literature analysis of PFAS occurrence suggests significant variation in their concentration ranging from 0.025 to 1.2 × 10⁸ ng/L in wastewater, 0.01 to 8.9 × 10⁵ ng/L in surface water, and <0.01 to 1.3 × 10⁴ ng/L in groundwater globally. Since conventional treatment techniques are inadequate in remediating PFAS, innovative treatment approaches based on their removal or mineralization mechanism have been comprehensively reviewed. Advanced treatment technologies have shown degradation or removal of PFAS to be around 6 and > 99.9% in different aqueous matrices. However, due to significant drawbacks in their applicability in wastewater treatment plants (WWTPs), a novel treatment train approach has emerged as an effective alternative. This approach synergistically integrates multiple remediation techniques while addressing the impediments of individual treatments. Furthermore, nanofiltration (NF270) combined with electrochemical degradation has been demonstrated to be the most efficient (>98%) treatment train approach in PFAS remediation. If implemented in WWTPs, nanofiltration followed by adsorption using activated carbon is also a viable method for PFAS removal.

Review: Hydrothermal treatment of per- and polyfluoroalkyl substances (PFAS)

PER: and polyfluoroalkyl substances (PFAS) are a concerning and unique class of environmentally persistent contaminants with biotoxic effects. Decades of PFAS discharge into water and soil resulted in PFAS bioaccumulation in plants, animals, and humans. PFAS are very stable, and their treatment has become a global environmental challenge. Significant efforts have been made to achieve efficient and complete PFAS mineralization using existing and emerging technologies. Hydrothermal treatments in subcritical and supercritical water have emerged as promising end-of-life PFAS destruction technologies, attracting the attention of scholars, industry, and key stakeholders. This paper reviews the state-of-the-art research on the behavior of PFAS, PFAS precursors, PFAS alternatives, and PFAS-containing waste in hydrothermal processes, including the destruction and defluorination efficiency, the proposed reaction mechanisms, and the environmental impact of these treatments. Scientific literature shows that >99% degradation and >60% defluorination of PFAS can be achieved through subcritical and supercritical water processing. The limitations of current research are evaluated, special considerations are given to the challenges of technology maturation and scale-up from laboratory studies to large-scale industrial application, and potential future technological developments are proposed.

Towards Solving the PFAS Problem: The Potential Role of Metal-Organic Frameworks

Per- and polyfluoroalkyl substances (PFAS) are a group of recalcitrant molecules that have been used since the 1940s in a variety of applications. They are now linked to a host of negative health outcomes and are extremely resistant to degradation under environmental conditions. Currently, membrane technologies or adsorbents are used to remediate contaminated water. These techniques are either inefficient at capturing smaller PFAS molecules, have high energy demands, or result in concentrated waste that must be incinerated at high temperatures. This Review focuses on what role metal-organic frameworks (MOFs) may play in addressing the PFAS problem. Specifically, how the unique properties of MOFs such as their well-defined pore sizes, ultra-high internal surface area, and tunable surface chemistry may be a sustainable solution for PFAS contamination.

Photodegradation of per- and polyfluoroalkyl substances in water: A review of fundamentals and applications

Per- and polyfluoroalkyl substances (PFAS) are persistent, mobile, and toxic chemicals that are hazardous to human health and the environment. Several countries, including the United States, plan to set an enforceable maximum contamination level for certain PFAS compounds in drinking water sources. Among the available treatment options, photocatalytic treatment is promising for PFAS degradation and mineralization in the aqueous solution. In this review, recent advances in the abatement of PFAS from water using photo-oxidation and photo-reduction are systematically reviewed. Degradation mechanisms of PFAS by photo-oxidation involving the holes (h_vb⁺) and oxidative radicals and photo-reduction using the electrons (e_cb^-) and hydrated electrons (e_aq^-) are integrated. The recent development of innovative heterogeneous photocatalysts and photolysis systems for enhanced degradation of PFAS is highlighted. Photodegradation mechanisms of alternative compounds, such as hexafluoropropylene oxide dimer acid (GenX) and chlorinated polyfluorinated ether sulfonate (F-53B), are also critically evaluated. This paper concludes by identifying major knowledge gaps and some of the challenges that lie ahead in the scalability and adaptability issues of photocatalysis for natural water treatment. Development made in photocatalysts design and system optimization forges a path toward sustainable treatment of PFAS-contaminated water through photodegradation technologies.

Phytoremediation prospects of per- and polyfluoroalkyl substances: A review

Extensive use of per- and polyfluoroalkyl substances (PFASs) in various industrial activities and daily-life products has made them ubiquitous contaminants in soil and water. PFAS-contaminated soil acts as a long-term source of pollution to the adjacent surface water bodies, groundwater, soil microorganisms, and soil invertebrates. While several remediation strategies exist to eliminate PFASs from the soil, strong ionic interactions between charged groups on PFAS with soil constituents rendered these PFAS remediation technologies ineffective. Pilot and field-scale data from recent studies have shown a great potential of PFAS to bio-accumulate and distribute within plant compartments suggesting that phytoremediation could be a potential remediation technology to clean up PFAS contaminated soils. Even though several studies have been performed on the uptake and translocation of PFAS by different plant species, most of these studies are limited to agricultural crops and fruit species. In this review, the role of both aquatic and terrestrial plants in the phytoremediation of PFAS was discussed highlighting different mechanisms underlying the uptake of PFASs in the soil-plant and water-plant systems. This review further summarized a wide range of factors that influence the bioaccumulation and translocation of PFASs within plant compartments including both structural properties of PFASs and physiological properties of plant species. Even though phytoremediation appears to be a promising remediation technique, some limitations that reduced the feasibility of phytoremediation in the practical application have been emphasized in previous studies. Additional research directions are suggested, including advanced genetic engineering techniques and endophyte-assisted phytoremediation to upgrade the phytoremediation potential of plants for the successful removal of PFASs.

Occurrence, source apportionment, and pollution assessment of per- and polyfluoroalkyl substances in a river across rural and urban areas

Forty-three novel and legacy per- and polyfluoroalkyl substances (PFASs) in water and sediments from the Chaobai River (Beijing) were quantified. The total PFASs concentrations varied from 0.04 to 31.3 ng/L in water with significant spatial but insignificant seasonal variations, and changed from 0.03 to 4.29 ng/g in sediment with insignificant spatial but significant seasonal variations. The PFASs concentrations in water from the upstream across the rural area reflected the background level due to the extremely low concentration and very few detected PFASs. The consumer products and metal plating/textile were the predominant pollution sources of PFASs in winter and summer, respectively, for both water and sediment samples. Integrating the determined baseline value, the distribution of PFASs concentrations, and the ecological risks of PFASs, three criteria were proposed, which divide the PFASs concentrations in water into four pollution levels, i.e., insignificant, low, medium, and high. According to the suggested criteria, 96.4% of the PFASs levels in upstream was insignificant pollution, which decreased to 50.4% in downstream and 50.8% in reservoirs. The PFASs in China's and world's surface waters demonstrated similar pollution patterns, with PFOA, PFOS, and PFHxA being the top 3 polluted PFASs. This study makes a small step forward the development of water quality standard for PFASs, which is of great importance for pollution control and risk management of PFASs.

A review of recent studies on toxicity, sequestration, and degradation of per- and polyfluoroalkyl substances (PFAS)

The fate, effects, and treatment of per- and polyfluoroalkyl substances (PFAS), an anthropogenic class of chemicals used in industrial and commercial production, are topics of great interest in recent research and news cycles. This interest stems from the ubiquity of PFAS in the global environment as well as their significant toxicological effects in humans and wildlife. Research on toxicity, sequestration, removal, and degradation of PFAS has grown rapidly, leading to a flood of valuable knowledge that can get swamped out in the perpetual rise in the number of publications. Selected papers from the Journal of Hazardous Materials between January 2018 and May 2022 on the toxicity, sequestration, and degradation of PFAS are reviewed in this article and made available as open-access publications for one year, in order to facilitate the distribution of critical knowledge surrounding PFAS. This review discusses routes of toxicity as observed in mammalian and cellular models, and the observed human health effects in exposed communities. Studies that evaluate of toxicity through in-silico approaches are highlighted in this paper. Removal of PFAS through modified carbon sorbents, nanoparticles, and anion exchange materials are discussed while comparing treatment efficiencies for different classes of PFAS. Finally, various biotic and abiotic degradation techniques, and the pathways and mechanisms involved are reviewed to provide a better understanding on the removal efficiencies and cost effectiveness of existing treatment strategies.

Sustainable environmental remediation via biomimetic multifunctional lignocellulosic nano-framework

Chemical pollution threatens human health and ecosystem sustainability. Persistent organic pollutants (POPs) like per- and polyfluoroalkyl substances (PFAS) are expensive to clean up once emitted. Innovative and synergistic strategies are urgently needed, yet process integration and cost-effectiveness remain challenging. An in-situ PFAS remediation system is developed to employ a plant-derived biomimetic nano-framework to achieve highly efficient adsorption and subsequent fungal biotransformation synergistically. The multiple component framework is presented as Renewable Artificial Plant for In-situ Microbial Environmental Remediation (RAPIMER). RAPIMER exhibits high adsorption capacity for the PFAS compounds and diverse adsorption capability toward co-contaminants. Subsequently, RAPIMER provides the substrates and contaminants for in situ bioremediation via fungus Irpex lacteus and promotes PFAS detoxification. RAPIMER arises from cheap lignocellulosic sources, enabling a broader impact on sustainability and a means for low-cost pollutant remediation.

Persistent organic pollutant (POP) remediation is important for protecting the environment and human health but can be expensive. Here, the authors report on the creation of a plant-based remediation material which can absorb high levels of POPs and then provide the nutrients needed for fungal degradation and detoxification.

Design of nanomaterials for the removal of per- and poly-fluoroalkyl substances (PFAS) in water: Strategies, mechanisms, challenges, and opportunities

Due to their persistent and pervasive distribution and their adverse effects on human health, the removal of per- and polyfluoroalkyl substances (PFAS) from the environment has been the focus of current research. Recent studies have shown that engineered nanomaterials provide great opportunities for their removal by chemical, physical and electrochemical adsorption methods, or as photo- or electrocatalysts that promote their degradation. This review summarizes and discusses the performance of recently reported nanomaterials towards PFAS removal in water treatment applications. We discuss the performance, mechanisms, and PFAS removal conditions of a variety of nanomaterials, including carbon-based, non-metal, single-metal, and multi-metal nanomaterials. We show that nanotechnology provides significant opportunities for PFAS remediation and further nanomaterial development can provide solutions for the removal of PFAS from the environment. We also provide an overview of the current challenges.