Persulfate activation by two-dimensional MoS2 confining single Fe atoms: Performance, mechanism and DFT calculations

Principles, challenges and prospects for electro-oxidation treatment of oilfield produced water

The oil industry is facing substantial environmental challenges, especially in managing waste streams such as Oilfield Produced Water (OPW), which represents a significant component of the industrial ecological footprint. Conventional treatment methods often fail to effectively remove dissolved oils and grease compounds, leading to operational difficulties and incomplete remediation. Electrochemical oxidation (EO) has emerged as a promising alternative due to its operational simplicity and ability to degrade pollutants directly and indirectly, which has already been applied in treating several effluents containing organic compounds. The application of EO treatment for OPW is still in an initial stage, due to the intricate nature of this matrix and scattered information about it. This study provides a technological overview of EO technology for OPW treatment, from laboratory scale to the development of large-scale prototypes, identifying design and process parameters that can potentially permit high efficiency, applicability, and commercial deployment. Research in this domain has demonstrated notable rates of removal of recalcitrant pollutants (>90%), utilizing active and non-active electrodes. Electro-generated active species, primarily from chloride, play a pivotal role in the oxidation of organic compounds. However, the highly saline conditions in OPW hinder the complete mineralization of these organics, which can be improved by using non-active anodes and lower salinity levels. The performance of electrodes greatly influences the efficiency and effectiveness of OPW treatment. Various factors must be considered when selecting the electrode material, such as its conductivity, stability, surface area, corrosion resistance, and cost. Additionally, the specific contaminants present in the OPW, and their electrochemical reactivity must be considered to ensure optimal treatment outcomes. Balancing these considerations can be challenging, but it is crucial for achieving successful OPW treatment. Active electrode materials exhibit a high affinity for chloride molecules, generating more active species than non-active materials, which exhibit more significant degradation potential due to the production of hydroxyl radicals. Regarding scale-up, key challenges include low current efficiency, the formation of by-products, electrode deactivation, and limitations in mass transfer. To address these issues, enhanced mass transfer rates and appropriate residence times can be achieved using flow-through mesh anodes and moderate current densities, which have proven to be the optimal configuration for this process.

Molybdenum disulphide nanoparticles accelerate the transformation of levofloxacin in planting soil upon exposure

The use of nanocatalytic particles for the removal of refractory organics from wastewater is a rapidly growing area of environmental purification. However, little has been done to investigate the effects of nanoparticles on soil-plant systems with antibiotic contamination. This work assessed the effect of molybdenum disulfide (MoS2) on the soil-Phragmites communis system containing levofloxacin (LVX). The results showed that the addition of MoS2 had restoration potential for stressed plant. The MoS2 with catalytic activity promoted the transformation of LVX in rhizosphere soils. The transformation pathways of LVX in the different exposure groups were proposed. The continuous output of radicals in the high MoS2 dosage group facilitated the transformation of LVX to small molecule compounds, which were eventually mineralized. Moreover, the electron-density-difference analysis revealed the easier flow of electrons from the MoS2 surface towards the LVX molecules. This finding provides theoretical support for the application of nanocatalytic particles in ecological environments.

Regulating iron center by defective MoS2 for superior Fenton-like catalysis in water purification: The key role of surface interaction and superoxide radical in accelerating metal redox-cycling

Transition metals exhibit high reactivity for Fenton-like catalysis in environmental remediation, but how to save consumption and reduce pollution is of great interest. In this study, rationally designed defect-engineered Fe@MoS2 (Fe@D-MoS2) was prepared by incorporating reactive iron onto structural defects generated from the chemical acid-etching, aiming to improve the energetic consumption of the catalyst in Fenton-like applications. Morphological and structural properties were elucidated in details, the Fenton-like reactivity was evaluated with five phenolic contaminants for oxidant activation, radical generation and environmental remediation. Compared to Fe@MoS2, Fe@D-MoS2 exhibited a 18.9-fold increase in phenol degradation (0.09 versus 1.79 min-1). Quenching experiments, electron paramagnetic resonance tests and electrochemical measurements revealed the dominant sulfate and superoxide radicals. Rendered by strong metal-substrate surface and electronic interactions from regulated chemical environment and coordination structure, the inert ≡ Fe(III) was reduced to the reactive ≡ Fe(II) accompanied by the ≡ Mo(IV) oxidation to ≡ Mo(V) in MoS2 lattice, with adjacent sulfur serving as the key electron transfer bridge. Therefore, this work shows that the incorporation of reactive centers is able to boost two-dimensional sulfide materials for environmental catalysis applications.

Single-atom catalysts activate persulfate to degrade emerging organic contaminants in aqueous environments

Single-atom catalysts (SACs) exhibit outstanding catalytic activity due to their highly dispersed metal centers. Activating persulfates (PS) with SACs can generate various reactive oxygen species (ROS) to efficiently degrade emerging organic contaminants (EOCs) in aqueous environments, offering unique advantages such as high reaction rates and excellent stability. This technique has been extensively researched and holds enormous potential applications. In this paper, we comprehensively elaborated on the synthesis methods of SACs and their limitations, and factors influencing the catalytic performance of SACs, including metal center characteristics, coordination environment, and types of substrates. We also analyzed practical considerations for application. Subsequently, we discussed the mechanism of SACs activating PS for EOCs degradation, encompassing adsorption processes, radical pathways, and non-radical pathways. Finally, we provide prospects and outline our vision for future research, aiming to guide advancements in applying this technique.

Iron (hydr)oxides-induced activation of sulfite for contaminants degradation: The critical role of structural Fe(III)

Iron-based sulfite (S(IV)) activation has emerged as a novel strategy to generate sulfate radicals (SO4•-) for contaminants degradation. However, numerous studies focused on dissolved iron-induced homogeneous activation processes while the potential of structural Fe(III) remains unclear. In this study, five iron (hydr)oxide soil minerals (FeOx) including ferrihydrite, schwertmannite, lepidocrocite, goethite and hematite, were successfully employed as sources of structural Fe(III) for S(IV) activation. Results showed that the catalytical ability of structural Fe(III) primarily depended on the crystallinity of FeOx instead of their specific surface area and particle size, with ferrihydrite and schwertmannite being the most active. Furthermore, in-situ ATR-FTIR spectroscopy and 2D-COS analysis revealed that HSO3- was initially adsorbed on FeO6 octahedrons of FeOx via monodentate inner-sphere complexation, ultimately oxidized into SO42- which was then re-adsorbed via outer-sphere complexation. During this process, strong oxidizing SO4•- and •OH were formed for pollutants degradation, confirmed by radical quenching experiments and electron spin resonance. Moreover, FeOx/S(IV) system exhibited superior applicability with respect to recycling test, real waters and twenty-six pollutants degradation. Eventually, plausible degradation pathways of three typical pollutants were proposed. This study highlights the feasibility of structural Fe(III)-containing soil minerals for S(IV) activation in wastewater treatment.

Lattice-Confined Single-Atom Catalyst: Preparation, Application and Electron Regulation Mechanism

Lattice-confined single-atom catalyst (LC SAC), featuring exceptional activity, intriguing stability and prominent selectivity, has attracted extensive attention in the fields of various reactions (e.g., hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), etc.). To design a "smart" LC SAC for catalytic applications, one must systematically comprehend updated advances in the preparation, the application, and especially the peculiar electron regulation mechanism of LC SAC. In this review, the specific preparation methods of LC SAC based on general coordination strategy are updated, and its applications in HER, OER, ORR, N2 reduction reaction (NRR), advanced oxidation processes (AOPs) and so forth are summarized to display outstanding activity, stability and selectivity. Uniquely, the electron regulation mechanisms are first and deeply discussed and can be primarily categorized as electron transfer bridge with monometallic active sites, novel catalytic centers with polymetallic active sites, and positive influence by surrounding environments. In the end, the existing issues and future development directions are put forward with a view to further optimize the performance of LC SAC. This review is expected to contribute to the in-depth understanding and practical application of highly efficient LC SAC.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Insights into mechanism of peroxymonosufate activation by Mo single-atom catalysts: Singlet oxygen evolution and role of Mo-N coordination

Recently, the Fenton-like reaction using peroxymonosulfate (PMS) has been acknowledged as a potential method for breaking down organic pollutants. In this study, we successfully synthesized a highly efficient and stable single atom molybdenum (Mo) catalyst dispersed on nitrogen-doped carbon (Mo-NC-0.1). This catalyst was then utilized for the first time to activate PMS and degrade bisphenol A (BPA). The Mo-NC-0.1/PMS system demonstrated the ability to completely degrade BPA within just 20 min. Scavenging tests and density functional theory (DFT) calculations have demonstrated that the primary reactive oxygen species was singlet oxygen (1O2) produced by Mo-N4 sites. The self-cycling of Mo facilitated PMS activation and the transition from a free radical activation pathway to a non-radical pathway mediated by 1O2. Simultaneously, the nearby pyridinic N served as adsorption sites to immobilize BPA and PMS molecules. The exceptionally high catalytic activity of Mo-NC-0.1 derived from its unique Mo-N coordination, which markedly reduced the distance for 1O2 to migrate to the BPA molecules. The Mo-NC-0.1/PMS system effectively reduced the acute toxicity of BPA and exhibited excellent cycling stability with minimal leaching. This study presented a new catalyst with high selectivity for 1O2 generation and provided valuable insights for the application of single atom catalysts in PMS-based AOPs.

Molybdenum disulfide co-catalysis boosting nanoscale zero-valent iron based Fenton-like process: Performance and mechanism

The conventional Fenton process has the drawbacks of low efficiency of Fe³⁺/Fe²⁺ conversion, low utilization of H₂O₂, and narrow range of pH. In this paper, molybdenum sulfide (MoS₂) was used as a co-catalyst to boost the nanoscale zero-valent iron (nZVI) based heterogeneous Fenton-like process for the degradation of Rhodamine B (RhB). The catalytic performance, influences of parameters, degradation mechanism, and toxicity of intermediates were explored. Compared with the conventional like-Fenton process, the existence of MoS₂ accelerated the decomposition of H₂O₂ and the RhB degradation rate constant of MoS₂/nZVI/H₂O₂ reached more than six times that of nZVI/H₂O₂. In addition, the effective pH range of MoS₂/nZVI/H₂O₂ was broadened to 9.0 with 84.9% of RhB being removed within 15 min. The co-catalytic system of MoS₂ and nZVI was stable and had high reusability according to the results of four consecutive runs. Quenching tests and electron paramagnetic resonance (EPR) demonstrated that hydroxyl radical (·OH), superoxide anions (·O₂^-), and singlet oxygen (¹O₂) were all involved in MoS₂/nZVI/H₂O₂. Compared with nZVI/H₂O₂ system, MoS₂ not only increased the corrosion of nZVI but also accelerated the conversion of Fe³⁺/Fe²⁺. ECOSAR analysis suggested that the overall acute and chronic toxicity of the degradation products decreased after treatment. Hence, this MoS₂ co-catalytic nZVI based Fenton-like process can be used as a promising alternative for the treatment of organic wastewater.

FeMo@porous carbon derived from MIL-53(Fe)@MoO3 as excellent heterogeneous electro-Fenton catalyst: Co-catalysis of Mo

An ultra-efficient electro-Fenton catalyst with porous carbon coated Fe-Mo metal (FeMo@PC), was prepared by calcining MIL-53(Fe)@MoO₃. This FeMo@PC-2 exhibited impressive catalytic performance for sulfamethazine (SMT) degradation with a high turnover frequency value (7.89 L/(g·min)), much better than most of reported catalysts. The mineralization current efficiency and electric energy consumption were 83.2% and 0.03 kWh/g_TOC, respectively, at low current (5 mA) and small dosage of catalyst (25.0 mg/L). The removal rate of heterogeneous electro-Fenton (Hetero-EF) process catalyzed by FeMo@PC-2 was 4.58 times that of Fe@PC/Hetero-EF process. Because the internal-micro-electrolysis occurred between PC and Fe⁰, while the co-catalysis of Mo accelerated the rate-limiting step of the Fe³⁺/Fe²⁺ cycle and greatly improved the H₂O₂ utilization efficiency. The results of radical scavenger experiments and electron paramagnetic resonance confirmed the main role of surface-bound hydroxyl radical oxidation. This process was feasible to remove diverse organic contaminants such as phenol, 2,4-dichlorophenoxyacetic acid, carbamazepine and SMT. This paper enlightened the importance of the doped Mo, which could greatly improve the activity of the iron-carbon heterogeneous catalyst derived from metal-organic frameworks in EF process for efficient removal of organic contaminants.

Engineering active heterojunction architecture with oxygenated-Co, Mo bimetallic sulfide heteronanosheet and graphene oxide for peroxymonosulfate activation

Bimetallic sulfides have distinctive catalytic property in activating peroxymonosulfate (PMS) for water remediation. Polyoxometalates as potential precursors have rarely been reported for the catalytic degradation of refractory organic pollutants. Herein, a composite catalyst of Co-Mo bimetallic sulfides supported onto graphene oxide (O-CoMoS/GO) with a heterojunction architecture was synthesized through a hydrothermal strategy with polyoxometalates ((NH₄)₄[Co^IIMo₆O₂₄H₆]·6H₂O) as the precursor and applied in the PMS activation. This material showed a superior performance for the catalytic degradation of the model organic pollutant, 4-chlorophenol (rapidly removed within 10 min with an apparent reaction rate constant of 0.5458 min^-1). O-CoMoS/GO outperformed most of the reported catalysts in terms of activity and had a strong tolerance towards common organic and inorganic compounds in water, and could perform well in different real water systems. Experimental and theoretical results indicated that the introduction of GO could achieve the enrichment of electrons on the metals and reduce the d band center (ε_d) of Co close to the Fermi level (ε_F), thereby facilitating the interfacial electron transfer process. The activation mechanism was due to the as-prepared bimetallic sulfides and the formation of heterojunction structure with GO, where Co(II) as the active center could be regenerated by the adjacent Mo element (as co-catalyst) and by gathering electrons from GO through the Co/Mo-O-C coupling. This work provides insights into the design of bimetallic sulfide catalysts in activating PMS for water remediation.

Phenol degradation in iron-based advanced oxidation processes through ferric reduction assisted by molybdenum disulfide

In the iron-based advanced oxidation processes (AOPs), direct use of Fe^III can be more convenient than Fe^II but the reduction of Fe^III to Fe^II is a rate-limiting step. Introducing co-catalysts with abundant reducing sites to Fe-based AOPs can be an efficient way to accelerate the Fe redox process. Herein, molybdenum disulfide (MoS₂) was used to enhance the catalytic performance of Fe³⁺/persulfate (PS) for phenol removal. In the Fe³⁺/MoS₂/PS system, 99.6 ± 0.1% of phenol was removed in 60 min, comparable to that of the Fe²⁺/PS/MoS₂ system (99.1 ± 0.3%). With the help of MoS₂, 99.3 ± 4.2% of Fe³⁺ was transformed to Fe²⁺ in 10 min, and the Fe²⁺/Fe ratio was able to be maintained at 70.0 ± 1.4% after 60 min. The rapid and complete reduction of Fe³⁺ with MoS₂ made it possible to replace Fe²⁺ by Fe³⁺, which is easier to store, transport, and use. The decrease in XPS peak area percentage of Mo(IV) and the lower valent S after reaction revealed that MoS₂ acted as an electron provider in the Fe redox cycle. Quenching experiment results indicated that the phenol removal was highly depended on the surface-bound radicals, including both SO₄^•- and ^•OH. Those results have demonstrated that ferric salts can be directly used in the Fe-based AOPs and the redox cycle could be sustained with the assistance of MoS₂.

WS2 significantly enhances the degradation of sulfachloropyridazine by Fe(III)/persulfate

The use of antibiotics has become an indispensable part of the production and life of human society. Among them, sulfonamide antibiotics widely used in humans and animals are considered to be one of the most crucial antibiotics. However, antibiotics are difficult to degrade naturally, leading to an accumulation in the environment and a potential hazard to human health. In this paper, WS₂ as a co-catalyst could reduce trace Fe(III) to Fe(II) which exhibited a great activating ability to PS through the exposed W(IV) active sites, and formed the Fe(III)/Fe(II) cycle to degrade sulfachloropyridazine (SCP) continuously. This paper systematically discussed the degradation of SCP under different conditions in the PS/WS₂/Fe(III) system, including the amount of WS₂, Fe(III) concentration, PS concentration, initial pH, natural organic matter (NOM) and common anions (NO₃^-, Cl^-, HCO₃^-, HPO₄^2- and H₂PO₄^-). The experimental results showed that PS/WS₂/Fe(III) system possessed a strong degradation ability for SCP in a wide pH range. NO₃^- and Cl^- could promote the degradation of SCP a little. HCO₃^-, HPO₄^2- and H₂PO₄^- could significantly inhibit the degradation of SCP. The main types of free radicals that degraded SCP were explored. In addition, the stability and reusability of WS₂ were examined, and two possible degradation pathways of SCP were proposed.

State-of-the-Art on the Sulfate Radical-Advanced Oxidation Coupled with Nanomaterials: Biological and Environmental Applications

Sulfate radicals (SO₄^-·) play important biological roles in biomedical and environmental engineering, such as antimicrobial, antitumor, and disinfection. Compared with other common free radicals, it has the advantages of a longer half-life and higher oxidation potential, which could bring unexpected effects. These properties have prompted researchers to make great contributions to biology and environmental engineering by exploiting their properties. Peroxymonosulfate (PMS) and peroxydisulfate (PDS) are the main raw materials for SO₄^-· formation. Due to the remarkable progress in nanotechnology, a large number of nanomaterials have been explored that can efficiently activate PMS/PDS, which have been used to generate SO₄^-· for biological applications. Based on the superior properties and application potential of SO₄^-·, it is of great significance to review its chemical mechanism, biological effect, and application field. Therefore, in this review, we summarize the latest design of nanomaterials that can effectually activate PMS/PDS to create SO₄^-·, including metal-based nanomaterials, metal-free nanomaterials, and nanocomposites. Furthermore, we discuss the underlying mechanism of the activation of PMS/PDS using these nanomaterials and the application of SO₄^-· in the fields of environmental remediation and biomedicine, liberating the application potential of SO₄^-·. Finally, this review provides the existing problems and prospects of nanomaterials being used to generate SO₄^-· in the future, providing new ideas and possibilities for the development of biomedicine and environmental remediation.

Large-Scale Synthesis of Iron Ore@Biomass Derived ESBC to Degrade Tetracycline Hydrochloride for Heterogeneous Persulfate Activation

Iron-based catalysts are widely used in water treatment and environmental remediation due to their abundant content in nature and their ability to activate persulfate at room temperature. Here, eggshell biochar-loaded natural iron slag (IO@ESBC) was successfully synthesized to remove tetracycline hydrochloride (TCH) by activated persulfate. The morphology, structure and chemical composition of IO@ESBC were systematically characterized. The IO@ESBC/PS process showed good performance for TCH removal. The decomposition rate constant (k) for IO@ESBC was 0.011 min−1 and the degradation rate was 3690 mmol/g/h in this system. With the increase of PS concentration and IO@ESBC content, the removal rate of TCH both increased. The IO@ESBC/PS process can effectively remove TCH at pH 3–9. There are different effects on TCH removal for the reason that the addition of water matrix species (humic acid, Cl−, HCO3−, NO3− and HPO42−). The IO@ESBC/PS system for degrading TCH was mainly controlled by both the free radical pathway (SO4•−, •OH and O2•−) and non-free radical pathway (1O2). The loading of ESBC slows down the agglomeration between iron particles, and more active sites are exposed. The removal rate of TCH was still above 75% after five cycles of IO@ESBC. This interesting investigation has provided a green route for synthesis of composite driving from waste resources, expanding its further application for environmental remediations.

Single-atom site catalysts for environmental remediation: Recent advances

Single-atom site catalysts (SACs) can maximize the utilization of active metal species and provide an attractive way to regulate the activity and selectivity of catalytic reactions. The adjustable coordination configuration and atomic structure of SACs enable them to be an ideal candidate for revealing reaction mechanisms in various catalytic processes. The minimum use of metals and relatively tight anchoring of the metal atoms significantly reduce leaching and environmental risks. Additionally, the unique physicochemical properties of single atom sites endow SACs with superior activity in various catalytic processes for environmental remediation (ER). Generally, SACs are burgeoning and promising materials in the application of ER. However, a systematic and critical review on the mechanism and broad application of SACs-based ER is lacking. Herein, we review emerging studies applying SACs for different ERs, such as eliminating organic pollutants in water, removing volatile organic compounds, purifying automobile exhaust, and others (hydrodefluorination and disinfection). We have summarized the synthesis, characterization, reaction mechanism and structural-function relationship of SACs in ER. In addition, the perspectives and challenges of SACs for ER are also analyzed. We expect that this review can provide constructive inspiration for discoveries and applications of SACs in environmental catalysis in the future.

Interfacial engineering of vacancy-rich nitrogen-doped FexOy@MoS2 Co-catalytic carbonaceous beads mediated non-radicals for fast catalytic oxidation

How to accelerate the Fe³⁺/Fe²⁺ conversion and fabricate recyclable iron-based catalysts with high reactivity and stability is highly desired yet challenging. Herein, vacancy-rich N@Fe_xO_y@MoS₂ carbonaceous beads were firstly developed via employing sodium alginate, molybdenum disulfide (MoS₂), and Fe-ZIFs through sol-gel self-assembly, followed by in-situ growth and pyrolysis strategies. As expected, A series of characterizations reflected that N@Fe_xO_y@MoS₂ had high dispersibility and conductivity for fast mass and electron transport, and MoS₂ as co-catalyst accelerated the circulation of Fe³⁺ to Fe²⁺ that attained 99.4% (0.345 min^-1) norfloxacin degradation via PMS activation in a synergistic ''adsorption-driven-oxidation'' process, which much outperformed those of pure MoS₂ (32.4%) and N@Fe_xO_y powder catalyst (45.3%). Moreover, confined Fe species, graphitic N, pyrrolic N, pyridinic N, and sulfur/oxygen vacancies were found as highly exposed active sites that contributed to the activation of PMS to dominate non-radicals (¹O₂ and O₂·^-) and other radicals following a contribution order ¹O₂ > O₂·^- > SO₄·^- > ^·OH. More importantly^, a fluidized-bed catalytic unit was evaluated and maintained the continuous zero discharge of NX. Overall, this study offered a generally applicable approach to fabricate removable Fe-based catalysts for contaminants remediation.

Single-Atom Engineering to Ignite 2D Transition Metal Dichalcogenide Based Catalysis: Fundamentals, Progress, and Beyond

Single-atom catalysis has been recognized as a pivotal milestone in the development history of heterogeneous catalysis by virtue of its superior catalytic performance, ultrahigh atomic utilization, and well-defined structure. Beyond single-atom protrusions, two more motifs of single-atom substitutions and single-atom vacancies along with synergistic single-atom motif assemblies have been progressively developed to enrich the single-atom family. On the other hand, besides traditional carbon material based substrates, a wide variety of 2D transitional metal dichalcogenides (TMDs) have been emerging as a promising platform for single-atom catalysis owing to their diverse elemental compositions, variable crystal structures, flexible electronic structures, and intrinsic activities toward many catalytic reactions. Such substantial expansion of both single-atom motifs and substrates provides an enriched toolbox to further optimize the geometric and electronic structures for pushing the performance limit. Concomitantly, higher requirements have been put forward for synthetic and characterization techniques with related technical bottlenecks being continuously conquered. Furthermore, this burgeoning single-atom catalyst (SAC) system has triggered serial scientific issues about their changeable single atom-2D substrate interaction, ambiguous synergistic effects of various atomic assemblies, as well as dynamic structure-performance correlations, all of which necessitate further clarification and comprehensive summary. In this context, this Review aims to summarize and critically discuss the single-atom engineering development in the whole field of 2D TMD based catalysis covering their evolution history, synthetic methodologies, characterization techniques, catalytic applications, and dynamic structure-performance correlations. In situ characterization techniques are highlighted regarding their critical roles in real-time detection of SAC reconstruction and reaction pathway evolution, thus shedding light on lifetime dynamic structure-performance correlations which lay a solid theoretical foundation for the whole catalytic field, especially for SACs.

Recent advances in single-atom catalysts for advanced oxidation processes in water purification

Single-atom catalysts (SACs) have attracted considerable attention from researchers because of their distinct structures and characteristics, especially in maximizing atomic utilization and elevating the intrinsic catalytic activity. More recently, SACs have been becoming a burgeoning area of the environmental field and are extensively applied to remove various refractory organic pollutants. This review summarizes the emerging synthetic and characterization strategies of SACs and analyzes their development tendency. Besides, the application of SACs in advanced oxidation processes (AOPs, e.g., catalysis of H₂O₂, activation of persulfates and photocatalysis) is discussed. The excellent removal of pollutants depends on the fast generation of reactive oxygen species (SO₄^•-, ^•OH, ¹O₂, and O₂^•-). The advantages of SACs in AOPs are summarized, and constructive opinions are put forward for the stability and activity of the catalyst. Finally, the opportunities and challenges faced by SACs and its future development direction in the AOPs catalytic field are proposed.