Facile synthesis of superparamagnetic β-CD-MnFe2O4 as a peroxymonosulfate activator for efficient removal of 2,4- dichlorophenol: structure, performance, and mechanism

Biochar alters the selectivity of MnFe2O4-activated periodate process through serving as the electron-transfer mediator

Constructing green and sustainable advanced oxidation processes (AOPs) for the degradation of organic contaminants is of great importance but still remains big challenge. In this work, an effective AOP (MnFe2O4-activated periodate, MnFe2O4/PI) was established and investigated for the oxidation of organic contaminants. To avoid the severe aggregation of MnFe2O4 nanoparticles, a hybrid MnFe2O4-biochar catalyst (MnFe2O4-BC) was further synthesized by anchoring MnFe2O4 nanoparticles on chemically inert biochar substrate. Intriguingly, MnFe2O4-BC/PI exhibited different selectivity towards organic contaminants compared with MnFe2O4/PI, revealing that biochar not only served as the substrate, but also directly participated into the oxidation process. Electron-transfer mechanism was comprehensively elucidated to be responsible for the abatement of pollutants in both MnFe2O4/PI and MnFe2O4-BC/PI. The surface oxygen vacancies (OVs) of MnFe2O4 were identified as the active sites for the formation of high potential complexes MnFe2O4-PI*, which could directly and indirectly degrade the organic pollutants. For the hybrid MnFe2O4-BC catalyst, biochar played multiple roles: (i) substrate, (ii) provided massive adsorption sites, (iii) electron-transfer mediator. The differences in selectivity of MnFe2O4/PI and MnFe2O4-BC/PI were determined by the adsorption affinity between biochar substrate and organics. Overall, the findings of this study expand the knowledge on the selectivity of PI-triggered AOPs.

MnFe2O4/MoS2 catalyst used for ozonation: optimization and mechanism analysis of phenolic wastewater treatment

The performance of catalytic ability of MFe2O4/MoS2 in the ozonation process was investigated in this work. The synthesized MnFe2O4/MoS2 was optimize prepared and then characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photo-electron spectroscopy, and magnetic saturation strength. The results showed that when Cphenol = 200 mg/L, initial pH = 9.0, Q = 0.10 L/min, and CMnFe2O4/MoS2 = 0.10 g/L, MnFe2O4/MoS2 addition improved the degradation efficiency of phenol by 20.0%. The effects of pH, catalyst dosage, and inorganic ions on the phenol removal by the MnFe2O4/MoS2 catalytic ozonation were investigated. Five cycle experiments proved that MnFe2O4/MoS2 had good recyclability and stability. MnFe2O4/MoS2 also showed good catalytic performance in the treatment of coal chemical wastewater pesticide wastewater. The MnFe2O4 doped with MoS2 could provide abundant surface active sites for ozone and promote the stable cycle of Mn2+/Mn3+and Fe2+/Fe3+, thus generating large amounts of •OH and improving the degradation of phenol by ozonation. The MnFe2O4/MoS2/ozonation treatment system provides a technical reference and theoretical basis for industrial wastewater treatment.

Development of natural attapulgite derived ferromanganese spinel oxides as heterogeneous catalysts for persulfate activation of tetracycline degradation

Ferromanganese spinel oxides (MnFe2O4, MFO) have been proven effective in activating persulfate for pollutants removal. However, their inherent high surface energy often leads to agglomeration, diminishing active sites and consequently restricting catalytic performance. In this study, using Al-MCM-41 (MCM) mesoporous molecular sieves derived from natural attapulgite as a support, the MFO/MCM composite was synthesized through dispersing MnFe2O4 nanoparticles on MCM carrier by a simple hydrothermal method, which can effectively activate persulfate (PS) to degrade Tetracycline (TC). The addition of Al-MCM-41 can effectively improve the specific surface area and adsorption performance of MnFe2O4, but also reduce the leaching amount of metal ions. The MFO/MCM composite exhibited superior catalytic reactivity towards PS and 84.3% removal efficiency and 64.7% mineralization efficiency of TC (20 mg/L) was achieved in 90 min under optimized conditions of 0.05 mg/L catalyst dosage, 5 mM PS concentration, room temperature and no adjustment of initial pH. The effects of various stoichiometric MFO/MCM ratio, catalyst dosage, PS concentration, initial pH value and co-existing ions on the catalytic performance were investigated in detail. Moreover, the possible reaction mechanism in MFO-MCM/PS system was proposed based on the results of quenching tests, electron paramagnetic resonance (EPR) and XPS analyses. Finally, major degradation intermediates of TC were detected by liquid chromatography mass spectrometry technologies (LC-MS) and four possible degradation pathways were proposed. This study enhances the design approach for developing highly efficient, environmentally friendly and low-cost catalysts for the advanced treatment process of antibiotic wastewater.

Novel Magnetic MnFe2O4-Decorated Graphite-Like Porous Biochar as a Heterogeneous Catalyst for Activation of Peroxydisulfate Toward Degradation of Rhodamine B

A magnetic MnFe2O4-modified graphite-like porous biochar composite (MnFe2O4/KFS800) was synthesized by the hydrothermal method, and its catalytic activity was evaluated in the activation of peroxydisulfate toward degradation of Rhodamine B. After characterization by SEM, XRD, and the BET method, the specific surface area and total pore volume of the MnFe2O4/KFS800 catalyst reached 121 m2/g and 0.263 m3/g, and exhibited plate-like morphology with good crystallinity. The degradation rate of Rhodamine B by the obtained composite was more than 91.1% when the initial concentration of RhB was 10 mg/L, the dosage of MnFe2O4/KFS800 was 0.2 g/L, and the initial pH was 6.7. Then the anti-interference ability of the obtained composite was studied, and it was found that there was a little effect on the degradation of Rhodamine B with the presence of humic acid. Finally, quenching test, EPR research, and XPS analysis were conducted to reveal the catalytic mechanism, and possible mechanism was a synergistic behavior of free radicals (SO4•-, •OH, O2•-) and nonfree radicals (1O2), and trace amounts of uncarbonized bagasse was also involved in the formation of free radicals.

Persulfate activation using leonardite char-supported nano zero-valent iron composites for styrene-contaminated soil and water remediation

Effective in-situ technology to treat carcinogenic compounds in contaminated areas poses a major challenge. Our objective was to load nano-zero-valent iron (nZVI) onto leonardite char (LNDC), an alternative carbon source from industrial waste, for use as a persulfate (PS) activator for styrene treatment in soil and water. By adding a surfactant during synthesis, cetyltrimethylammonium bromide (CTAB) promotes a flower-like morphology and the nZVI formation in smaller sizes. Results showed that nZVI plays a crucial role in PS activation in both homogeneous and heterogeneous reactions to generate reactive oxygen species (ROS), which can remove 98% of styrene within 20 min. Quenching experiments indicated that singlet oxygen (1O2), superoxide radicals (O2•-), and sulfate radicals (SO4•-) were the main species working together to degrade styrene. XPS analysis also revealed a role of surface oxygen-containing groups (i.e., CO, C-OH) in activating PS for SO4•- and 1O2 generation. The possible reaction mechanism of PS activation by LNDC-CTAB-nZVI composite and factors affecting treatment efficiency (i.e., PS concentration, catalyst dosage, pH, and humic acid) were illustrated. The molarity/molality ratio of PS to nZVI should be set greater than 1 for effective styrene removal. GC-MS analysis showed that styrene was degraded to a less toxic benzaldehyde intermediate. However, the excessive use of PS and catalysts can harm plant growth, requiring a combining approach to achieve safer use for real applications. Overall results supported the use of the LNDC-CTAB-nZVI/PS system as an efficient in-situ treatment technology for soil and water remediation.

Efficient Photocatalytic Degradation of Tetracycline on the MnFe2O4/BGA Composite under Visible Light

In this work, the MnFe₂O₄/BGA (boron-doped graphene aerogel) composite prepared via the solvothermal method is applied as a photocatalyst to the degradation of tetracycline in the presence of peroxymonosulfate. The composite's phase composition, morphology, valence state of elements, defect and pore structure were analyzed by XRD, SEM/TEM, XPS, Raman scattering and N₂ adsorption-desorption isotherms, respectively. Under the radiation of visible light, the experimental parameters, including the ratio of BGA to MnFe₂O₄, the dosages of MnFe₂O₄/BGA and PMS, and the initial pH and tetracycline concentration were optimized in line with the degradation of tetracycline. Under the optimized conditions, the degradation rate of tetracycline reached 92.15% within 60 min, whereas the degradation rate constant on MnFe₂O₄/BGA remained 4.1 × 10^-2 min^-1, which was 1.93 and 1.56 times of those on BGA and MnFe₂O₄, respectively. The largely enhanced photocatalytic activity of the MnFe₂O₄/BGA composite over MnFe₂O₄ and BGA could be ascribed to the formation of type I heterojunction on the interfaces of BGA and MnFe₂O₄, which leads to the efficient transfer and separation of photogenerated charge carriers. Transient photocurrent response and electrochemical impedance spectroscopy tests offered solid support to this assumption. In line with the active species trapping experiments, SO₄^•- and O₂^•- radicals are confirmed to play crucial roles in the rapid and efficient degradation of tetracycline, and accordingly, a photodegradation mechanism for the degradation of tetracycline on MnFe₂O₄/BGA is proposed.

(NH4)2Mo3S13/MnFe2O4 hybrid with multiple active sites boosted activation of peroxymonosulfate for removal of tetracycline

Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have attracted much attention in wastewater treatment. Here, a series of (NH₄)₂Mo₃S₁₃/MnFe₂O₄ (MSMF) composites were prepared and used as PMS activators to remove tetracycline (TC) for the first time. When the mass ratio of (NH₄)₂Mo₃S₁₃ to MnFe₂O₄ was 4.0 (MSMF4.0), the composite showed remarkable catalytic efficiency for activating PMS to remove TC. Over 93% of TC was removed in MSMF4.0/PMS system in 20 min. The aqueous ^•OH as well as the surface SO₄^•- and ^•OH were the primary reactive species for TC degradation in MSMF4.0/PMS system, and the comprehensive experimental results excluded the contributions of aqueous SO₄^•-, O₂^•-, and ¹O₂, high-valent metal-oxo species, and surface-bound PMS. The Mn(II)/Mn(III), Fe(II)/Fe(III), Mo(IV)/Mo(VI), and S^2-/SO_x^2- all contributed to the catalytic process. MSMF4.0 also showed excellent activity and stability after five cycles and significant degradation efficiency for a variety of pollutants. This work will provide theoretical basis for applying MnFe₂O₄-based composites in PMS-based AOPs.

Selective and efficient removal of emerging contaminants by sponge-like manganese ferrite synthesized using a solvent-free method: Crucial role of the three-dimensional porous structure

Ubiquitous macromolecular natural organic matter (NOM) in wastewater seriously influences the removal of emerging small-molecule contaminants via heterogeneous advanced oxidation processes because this material covers active sites and quenches reactive oxygen species. Here, sponge-like magnetic manganese ferrite (MnFe₂O₄-S) with a three-dimensional hierarchical porous structure was prepared via a facile solvent-free molten method. Compared with the particle-like structure of MnFe₂O₄-P, the sponge-like structure of MnFe₂O₄-S presents an enlarged specific surface area (112.14 m²·g^-1 vs. 58.73 m²·g^-1) and a smaller macropore diameter (68.2-77.2 nm vs. 946.5 nm). Enlarging the specific surface area increases the exposure of active sites, and adjusting the pore size helps sieve NOM and emerging contaminants. These changes are expected to effectively improve the degradation activity and overcome interference. To confirm the superiority of the sponge-like structure, MnFe₂O₄-S was used to activate peroxymonosulfate (PMS) for the degradation of multiple emerging contaminants, and its ability to degrade bisphenol A with and without humic acid (HA) was compared with that of MnFe₂O₄-P. The degradation activity of MnFe₂O₄-S was 1.6 times greater than that of MnFe₂O₄-P. Moreover, 20 mg·L^-1 HA inhibited the degradation activity of MnFe₂O₄-S by only 7.1%, which was much lower than that obtained for MnFe₂O₄-P (53.4%). In addition, the excellent performance was maintained in multiple water matrices. Notably, under lake water matrices, the degradation activity of MnFe₂O₄-P was inhibited by 35.6% while that of MnFe₂O₄-S was hardly inhibited. More importantly, the MnFe₂O₄-S/PMS system was also applicable to the treatment of actual wastewater and 73.0% and 90.1% of total organic carbon and chemical oxygen demand was removed from bio-treated coking wastewater containing non-biodegradable contaminants and NOM. This study provides an alternative route for the green production of high-activity porous spinel ferrites with environmental anti-interference properties.

Oxygen vacancy-mediated peroxydisulfate activation and singlet oxygen generation toward 2,4-dichlorophenol degradation on specific CuO1-x nanosheets

Durable and stable removal of 2,4-dichlorophenpl (2,4-DCP) by CuO_1-x nanosheets is reported. CuO_1-x nanosheets were fabricated by a simple defect engineering strategy and greatly increased the efficiency of peroxydisulfate (PDS) activation to improve 2,4-DCP removal by introducing abundant oxygen vacancy (V_o) to produce an electron-rich surface. Results showed that CuO_1-x nanosheets exposed more V_o as active sites for PDS activation as compared with that of CuO nanoparticles, giving rise to dramatic enhancement of catalytic performance with ultrahigh reaction rate that is qualified for serving in flow filtration system, completely degrading 100 mg L^-1 of 2,4-DCP within 3 s of residence time. Besides, experimental studies confirmed that ¹O₂ generated by V_o - mediated PDS activation plays the dominate role in the degradation of contaminants. Relative to the previously reported CuO/PDS systems, the obtained CuO_1-x nanosheets demonstrated 2.7 times higher specific PDS activity and 67 times higher specific CuO activity for 2,4-DCP removal. Our study not only improves the fundamental understanding of active sites in morphologically tunable metal oxides but also proposes a guideline for future research and engineering application of persulfate.

Recyclable Fe/S co-doped nanocarbon derived from metal-organic framework as a peroxymonosulfate activator for efficient removal of 2,4-dichlorophenol

In this study, a recyclable Fe/S co-doped nanocarbon (Fe/S-NC) was successfully prepared by the pyrolysis of ZIF-8 confined with Fe(II) and added S. Characterization showed that a highly graphitized carbon-based material co-doped with sulfur and iron was successfully prepared. This Fe/S-NC can efficiently activate PMS to remove organic pollutants in water. The effect of different synthesis conditions on the degradation efficiency of 2,4-DCP was studied by orthogonal experiments. The optimized Fe/S-NC/PMS system exhibited excellent catalytic performance and could degrade more than 99.7% of 2,4-DCP within 30 min. Even after 5 cycles, the degradation efficiency could still be maintained above 96.3%, which proved that the catalytic system had good cycle performance. In addition, the effect of pH on catalytic performance showed that the degradation rate of 2,4-DCP exceeds 96.7% in the pH range of groundwater (pH = 5-9). We had confirmed that the free radicals that caused 2,4-DCP degradation were SO₄^·-, ·OH, O₂^·-, and ¹O₂, which played important roles in degrading organic pollutants. These research results show that the Fe/S-NC/PMS system can be used as an efficient, stable, and environmentally friendly system to treat organic pollutants in groundwater.

Spinel ferrites materials for sulfate radical-based advanced oxidation process: A review

In the past decade, the sulfate radical-based advanced oxidation processes (SR-AOPs) have been increasingly investigated because of their excellent performance and ubiquity in the degradation of emerging contaminants. Generally, sulfate radicals can be generated by activating peroxodisulfate (PDS) or peroxymonosulfate (PMS). To date, spinel ferrites (SF) materials have been greatly favored by researchers in activating PMS/PDS for their capability and unique superiorities. This article reviewed the recent advances in various pure SF, modified SF, and SF composites for PDS/PMS activation. In addition, synthesis methods, mechanisms, and potential applications of SF-based SR-AOPs were also examined and discussed in detail. Finally, we present future research directions and challenges for the application of SF materials in SR-AOPs.

Insights into the correlation between different adsorption/oxidation/catalytic performance and physiochemical characteristics of Fe-Mn oxide-based composites

Fe-Mn oxide-based composites have been widely used in the solidification of heavy metals or the removal of organic pollutants, which can not only show excellent adsorption/oxidation performance, but also show catalytic activity for common oxidants. At present, the correlation between adsorption/oxidation/catalytic performance and physicochemical characteristics of these composites, and the underlying mechanisms are still unclear. Therefore, the main purpose of this review is to disclose the internal relationship between the physicochemical properties of Fe-Mn oxide-based composites and the pollutant removal performance. From the perspective of crystal phase, the basic units of Fe-Mn oxide composites are divided into Fe-Mn binary oxide (FMBO) and spinel MnFe₂O₄, and the two species were discussed separately in most chapters. The selected physicochemical properties mainly include the type of Fe-Mn oxide composites, surface-to-volume ratio, pore volume, pH_pzc, crystal type, surface functional groups. Because the physicochemical properties that determine how effective Fe-Mn oxide material is at removing contaminants may differ as it performs different functions, we discussed the above problems under different application scenarios (adsorption, oxidation, and advanced oxidation process). Additionally, internal factor (Fe/Mn mole ratio) and external factors (pH_ini, co-ions and ionic strength) were analyzed, and several common synthetic strategies of these composites were presented.

Nonradical electron transfer-based peroxydisulfate activation by a Mn-Fe bimetallic oxide derived from spent alkaline battery for the oxidation of bisphenol A

Mn-Fe bimetallic oxide has been employed as an outstanding peroxydisulfate (PDS) activator, but the underlying mechanism is still controversial. In this work, Mn_0.27FeO_4.55 (MFBO) was synthesized using the recovered waste alkaline battery and its catalytic activity and mechanism for PDS activation were explored in detail. Results show that MFBO exhibited a higher catalytic activity than the individual single metal oxides (FeO_x and Mn₂O₃) due to the synergistic effect between Fe and Mn elements. The removal efficiency of bisphenol A (BPA) with an initial concentration of 10 mg/L reached 97.8% within 90 min in the presence of 0.5 g/L MFBO and 2.0 mM PDS. Moreover, the MFBO maintained high stability and reusability even after being recycled for five times. With the aid of a series of experiments and ex-situ/in-situ characterizations, a non-radical PDS activation mechanism was proposed, in which organic contaminants would be oxidized through a direct electron transfer pathway mediated by the metastable reactive complexes (MFBO-PDS*). Notably, the MFBO/PDS system revealed selective oxidation towards different organic pollutants and the reaction rates were closely related to their structures and properties. The research provided an effective alternation process for application of the waste battery, as well as developed a novel perspective for removal of recalcitrant aqueous contaminants through a nonradical mechanism.

Synergistic ferroptosis-gemcitabine chemotherapy of the gemcitabine loaded carbonaceous nanozymes to enhance the treatment and magnetic resonance imaging monitoring of pancreatic cancer

Pancreatic adenocarcinoma (PDAC) is one of the deadliest cancers, and it is resistant to most conventional antineoplastic therapies. To address this challenge, gemcitabine (Gem)-loaded carbonaceous nanoparticles (MFC-Gem) as nanozymes and a theranostic platform were fabricated and used for MR-guided ferroptosis-chemo synergetic therapy of PDAC. As a biocompatible carrier, MFC-Gem nanoparticles are regarded as peroxidase-like and glutathione peroxidase-like nanozymes that promote ferroptosis therapy by effectively generating ROS and consuming GSH. Meanwhile, the combination of MnFe2O4 and Gem can markedly enhance synergetic therapy by both ferroptosis and Gem chemotherapy. MFC-Gem has higher magnetic susceptibility and was used for simultaneous magnetic resonance imaging (MRI) monitoring of the PDAC treatment. In conclusion, these salient features unequivocally indicate that this biocompatible nanotheranostic system has cooperative and enhancing chemotherapy effects for anti-PDAC therapy with simultaneous MRI monitoring. STATEMENT OF SIGNIFICANCE: Pancreatic adenocarcinoma (PDAC) is one of the deadliest cancers, and it is resistant to most conventional antineoplastic therapies. To address this challenge, gemcitabine (Gem)-loaded carbonaceous nanoparticles (MFC-Gem) as nanozymes and a theranostic platform were fabricated and used for MR-guided ferroptosis-chemo synergetic therapy of PDAC. i) MFC nanoparticles are regarded as peroxidase-like and glutathione peroxidase-like nanozymes that enhance ferroptosis therapy by effectively generating ROS and consuming GSH. ii) The combination of MnFe2O4 and Gem can markedly enhance synergetic therapy by both ferroptosis and Gem chemotherapy. iii) MFC-Gem has higher magnetic susceptibility and was used for simultaneous magnetic resonance imaging (MRI) monitoring of the PDAC treatment.

Insights into the mechanism of redox pairs and oxygen vacancies of Fe2O3@CoFe2O4 hybrids for efficient refractory organic pollutants degradation

The core-shell Fe₂O₃@CoFe₂O₄ hybrids microspheres with abundant oxygen vacancies were synthesized through in-situ ion exchange-calcination method and employed to induce peroxymonosulfate (PMS) to eliminate organic pollutants. The superior catalytic activity and stability of Fe₂O₃@CoFe₂O₄ were attributed to the synergistic effects of M²⁺/M³⁺ (M denotes Co or Fe) redox cycles. SO₄^·-, ·OH, O₂^·- and ¹O₂ were proved to be the main reactive oxygen species (ROS) involved in the phenol degradation process through quenching experiments and EPR measurements, while the surface-bound SO₄^·- played a dominant role. Trace metal ions leached during the reaction enhanced the PMS activation, and the oxygen vacancies electron transfer process played a critical role in the formation of O₂^·-/¹O₂ and the cycle of M²⁺/M³⁺ redox pairs. The formation of ROS and function of ¹O₂ were also revealed from bulk reaction and interface reaction. This study highlighted the simultaneous evolution of PMS reduction and oxidation to generate ROS, which provided an insight into the efficient catalytic degradation of persistent organic pollutants (POPs).

Alkylpolyglycoside modified MnFe2O4 with abundant oxygen vacancies boosting singlet oxygen dominated peroxymonosulfate activation for organic pollutants degradation

A novel alkylpolyglycoside (APG)-modified MnFe₂O₄ nanocomposite (APG@MnFe₂O₄) enriched with oxygen vacancies (VOs) was developed via co-precipitation and characterized as a peroxymonosulfate (PMS) activator to degrade 2,4-dichlorophenol (2,4-DCP) as the model contaminant. The APG effectively promoted the in situ formation of VOs on MnFe₂O₄ and subsequently enhanced the production of singlet oxygen (¹O₂). Furthermore, the APG@MnFe₂O₄ initialized an even more efficient non-radical pathway and dominated the degradation of 2,4-DCP. The constructed APG@MnFe₂O₄ exhibited a much higher reaction rate constant (0.0522) by ~12.73 times of that of the bare MnFe₂O₄ (0.0041). The degradation efficiency of 2,4-DCP in the APG@MnFe₂O₄/PMS system approached 93% within 90 min, a rate significantly higher than that in the MnFe₂O₄/PMS system (32%) given the same condition. The reasonable catalytic mechanism can be attributed to the Fe/Mn/VOs species. The APG@MnFe₂O₄ also exhibits universally high removal activity for various pollutants and excellent cyclic stability. Thus, the APG@MnFe₂O₄ is a promising PMS activator, and its utilization offers a useful strategy for developing VOs-enriched MnFe₂O₄ catalysts as a means of eliminating organic pollutants from wastewater.

Magnetic CuNiFe2O4 nanoparticles loaded on multi-walled carbon nanotubes as a novel catalyst for peroxymonosulfate activation and degradation of reactive black 5

Novel copper-nickel ferrite nanocatalyst loaded on multi-walled carbon nanotube (MWCNTs-CuNiFe₂O₄) was synthesized and applied to activate peroxymonosulfate (PMS) in the degradation of the reactive black 5 (RB5). The structure of the catalyst was well characterized by scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD). The MWCNTs-CuNiFe₂O₄/PMS system showed a high performance in the degradation of RB5 with a kinetic rate of 1.5-2.5 times higher than homogeneous and heterogeneous systems. Maximum degradation efficiency (99.60%) was obtained at an initial pH of 7, catalyst dosage of 250 mg/L, PMS dosage of 4 mM, the temperature of 25 °C, and reaction time of 15 min. Anion experiments emphasized that the presence of nitrate, carbonate, and phosphate in the solution reduced the degradation efficiency by producing reactive species with low oxidation potential. The RB5 degradation rate evolved with temperature, and the activation energy was obtained to be 44.48 kJ/mol. The mechanism of PMS activation and production of free radicals was proposed based on tert-butyl alcohol (TBA), ethanol (EtOH), and potassium iodide (KI) scavengers. Trapping experiments showed that both sulfate (SO₄^•-) and hydroxyl (^•OH) radicals are involved in the catalytic degradation of RB5. The effective treatment of real wastewater and tap water by the MWCNTs-CuNiFe₂O₄/PMS system requires a long reaction time. Gas chromatography-mass spectrometry (GC-MS) analysis indicated that RB5 can be degraded via methylation, decarboxylation, hydroxylation, and ring/chain cleavage pathways. The stable catalytic activity after three consecutive cycles suggested that MWCNTs-CuFe₂O₄ is a novel reusability catalyst in PMS activation.

Hierarchical multi-active component yolk-shell nanoreactors as highly active peroxymonosulfate activator for ciprofloxacin degradation

The reasonable design of the structure and composition of catalysts was essential to improve the catalytic performance of advanced oxidation processes (AOPs). Herein, we reported a simple strategy to synthesize hierarchical Co₃O₄-C@CoSiO_x yolk-shell nanoreactors with multiple active components by using metal-organic frameworks (MOFs). The novel nanoreactors are further used to activate peroxymonosulfate (PMS) for ciprofloxacin (CIP) degradation. The effects of reaction parameters (pH value, co-existing ions, reaction temperature, etc.) on CIP degradation were systematically investigated. Especially, ∼98.2% of CIP was degraded within 17 min under the optimal conditions, together with the low cobalt leaching and excellent reusability. The appreciable catalytic performance improvement might be due to the synergistic effect of the structure and component design: (1) the hierarchical yolk-shell structure endowed the catalyst with high surface area (∼232.47 m²/g) and fully exposed active sites; (2) abundant highly active ≡Co-OH⁺ were formed on the surface of CoSiO_x; (3) the presence of oxygen vacancies and nitrogen-doped carbon promoted the decomposition of PMS through a non-radical process. The results revealed both the radical (SO₄^∙-, ∙OH and O₂^∙-) and non-radical (¹O₂ and direct charge transfer) should be responsible for the CIP degradation. Moreover, the possible degradation pathways of CIP were proposed through the identification of intermediates using LC-MS/MS techniques and density functional theory (DFT) calculation. Our work highlights that multi-component catalysts derived from MOFs with novel structure have broad application prospects in AOPs.

Gold nanoparticles-modified MnFe2O4 with synergistic catalysis for photo-Fenton degradation of tetracycline under neutral pH

To decrease the adverse environmental and health-related effects of antibiotics, a series of MnFe₂O₄-Au (MFO-Au) composites were prepared by simple co-precipitation and photoreduction methods for efficient photo-Fenton degradation of tetracycline (TC). The synergistic effect of MFO and gold nanoparticles (AuNPs) with high absorption of visible light and strong photogenerated carrier separation efficiency endowed MFO-Au₃ an outstanding photo-Fenton catalytic performance for TC degradation in neutral condition. The surface hydroxyl of MFO profited to generation of •OH, and negative charged or partially polarized AuNPs benefited to adsorption of H₂O₂, which had a synergistic effect on enhancing the photo-Fenton catalytic performance of MFO-Au. 88.3% of TC was efficiently removed and about 51.9% of TOC decreased within 90 min. The electron spin resonance and quenching tests suggested that h⁺ and e^- were responsible for the high catalytic degradation and •OH and •O₂^- participated in the photo-Fenton reaction. The toxicity assessment by seed germination experiments showed efficient toxicity reduction of this system. Besides, MFO-Au exhibited high stability, good cycle, relatively economical and practical application performance, which is expected to provide potential guidance for the design and combination of noble nanoparticles with high stability and spinel bimetallic oxides with high catalytic activity in photo-Fenton reactions.

Carbon aerogel from forestry biomass as a peroxymonosulfate activator for organic contaminants degradation

The carbon catalyst has been widely used as a peroxymonosulfate (PMS) activator to degrade organic contaminants. The biomass carbon aerogel (CA) derived from poplar powder was synthesized in this study. CA with three-dimensional structure exhibited an excellent degradation performance of PMS activation for different types of organic contaminants including bisphenol A (BPA), rhodamine 6 G, phenol, and p-chlorophenol with the removal efficiencies up to 91%, 100%, 100%, and 60% within 60 min, respectively. It was found that singlet oxygen (¹O₂) dominated the non-radical pathway worked for BPA removal in CA/PMS system. The possible mechanism for PMS activation was discussed. A portion of ¹O₂ was produced through the transformation of superoxide radical (O₂^•-) in CA/PMS system. Electronic impedance spectroscopy (EIS) proved that the hierarchical structure of CA contributed to the electron transfer process for PMS activation. The ketonic/carbonyl groups (C˭O) on the surface of CA could serve as a possible active site to facilitate the generation of ¹O₂. In addition, CA showed superior degradation performance in actual water bodies and reusability with high-temperature regeneration treatment. This study developed an efficient and environmentally benign catalyst for water remediation of organic pollutants.

Mechanism analysis of MnFe2O4/FeSX for removal of Cr(VI) from aqueous phase

By using Na₂S as a sulfur source, sulfur-doped MnFe₂O₄ was prepared using one-step solvent thermal method and utilized to remove hexavalent chromium. The materials were characterized through scanning electron microscopy, transmission electron microscopy, high-resolution TEM, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller method, zeta potential test, vibrating sample magnetometry, and X-ray photoelectron spectroscopy. When the pH was 3, the adsorption capacity of MnFe₂O₄/FeS_X-0.5 to Cr(VI) was 43.36 mg/g, which was roughly five times that of MnFe₂O₄ (8.90 mg/g). MnFe₂O₄/FeS_X-0.5 and MnFe₂O₄ fitted the Freundlich and pseudo-second-order kinetic models well. The electrochemical test analysis results showed that MnFe₂O₄/FeS_X had a faster MnFe₂O₄ electron transfer rate and higher electron transfer capacity than MnFe₂O₄, and thus promoted the reduction of Cr(VI) to Cr(III). This finding could be attributed to the lower electronegativity of the sulfur element than the oxygen element. In addition, the formation of additional FeS_X through sulfur doping improved the Cr(VI) removal ability of the prepared materials. The XPS and desorption results showed that more than 80% of the adsorbed Cr(VI) were reduced to Cr(III), which indicated that reduction was an important mechanism for Cr(VI) removal. This study verified that sulfur-doped manganese ferrite can be utilized in the high-efficiency removal of Cr(VI).

ZIF-8 derived Fe‒N coordination moieties anchored carbon nanocubes for efficient peroxymonosulfate activation via non-radical pathways: Role of FeNx sites

Developing high-efficient hybrids carbon catalysts for PMS-based advanced oxidation process (AOPs) are crucial in the field of environmental remediation. In this work, novel carbon nanocubes (xFe‒N‒C) with three-dimensional porous structure and abundant well-dispersed FeN_x sites were obtained via a skillful cage-encapsulated-precursor pyrolysis strategy. The as-synthesized xFe‒N‒C exhibited superb activity for phenol degradation by activating peroxymonosulfate (PMS). Besides, the catalytic system not only possessed good recycling performance, wide pH adaptation and relatively low activation energy, but also had high resistance to environmental interference. Singlet oxygen (¹O₂) dominated non-radical process was responsible for phenol degradation rather than traditional radical pathways. Impressively, the doping level of Fe could regulate FeN_x contents in catalysts, and the catalytic activity of xFe‒N‒C was greatly enhanced with increasing FeN_x contents. Based on density functional theory calculations (DFT), the introduction of FeN_x sites regulated the electronic structure of catalysts. Such electron-deficient Fe center acted as electron acceptor to receive electrons transmitted by the adsorbed PMS, thus generating highly reactive ¹O₂ for rapid phenol oxidation. This work provides a new insight into the innovation in transition metal-nitrogen hybrid carbon catalysts and highlights the pivotal roles of FeN_x sites in ¹O₂ generation during PMS activation process.

Gut Microbiota Combined With Metabolomics Reveals the Repeated Dose Oral Toxicity of β-Cyclodextrin in Mice

Βeta-cyclodextrin (β-CD) with a hydrophobic cavity enables the formation of inclusion complexes with organic molecules. The formation of host–guest complexes makes the application of β-CD popular in many fields, but their interaction with organisms is poorly understood. In the present study, the effect of β-CD on gut microbiota (16S rRNA gene sequencing), serum metabolites (gas chromatography–mass spectrometry platform), and their correlation (Pearson correlation analysis) was investigated after 14 days repeated oral exposure in mice. β-CD did not significantly affect the α-diversity indexes, including Richness, Chao1, Shannon and Simpson indexes, but disturbed the structure of the gut bacteria according to the result of principal component analysis (PCA). After taxonomic assignment, 1 in 27 phyla, 2 in 48 classes, 3 in 107 orders, 6 in 192 families, and 8 in 332 genera were significantly different between control and β-CD treated groups. The serum metabolites were significantly changed after β-CD treatment according to the result of unsupervized PCA and supervised partial least squares-discriminant analysis (PLS-DA). A total of 112 differential metabolites (89 downregulated and 23 upregulated) were identified based on the VIP >1 from orthogonal PLS-DA and p <0.05 from Student’s t-test. The metabolic pathways, including ABC transporters, pyrimidine metabolism, purine metabolism, glucagon signaling pathway, insulin signaling pathway, and glycolysis/gluconeogenesis, were enriched by KEGG pathway analysis. Our study provides a general observation of gut microbiota, serum metabolites and their correlation after exposure to β-CD in mice, which will be helpful for future research and application of β-CD.

Recent progress in using hybrid silicon polymer composites for wastewater treatment

Heavy metal ions, oil and organic pollutants in water does not only cause serious water pollution, but also pose serious threats to ecosystems and human health. To this end, water pollution has gradually gained human attention, and various wastewater treatment methods are emerging. Organosilicon polymer composites are a class of materials that contain organic-inorganic hybrid structures with the characteristics of hydrophobicity, thermal stability and easy modification, which provides a brand new solution for wastewater treatment. In this review, various structural features including amorphous, linear, and cage structure of silicon containing polymer composites and the removal mechanism targeting at heavy metal ions, oil and organic pollutants of silicon containing polymer composites are summarized. The viewpoints and challenges in adsorption and engineering application are discussed, and possible solutions are proposed.

Uniform Mesoporous Amorphous Cobalt-Inherent Silicon Oxide as a Highly Active Heterogeneous Catalyst in the Activation of Peroxymonosulfate for Rapid Oxidation of 2,4-Dichlorophenol: The Important Role of Inherent Cobalt in the Catalytic Mechanism

Amorphous cobalt-inherent silicon oxide (Co-SiOx) was synthesized for the first time and employed as a highly active catalyst in the activation of peroxymonosulfate (PMS) for the rapid oxidation of 2,4-dichlorophenol (2,4-DCP). The characterization results revealed that the 0.15Co-SiOx possessed a high specific surface area of 607.95 m²/g with a uniform mesoporous structure (24.33 nm). The X-ray diffraction patterns indicate that the substituted cobalt atoms enlarge the unit cell parameter of the original SiO₂, and the selected area electron diffraction pattern confirmed the amorphous nature of Co-SiOx. More bulk oxygen vacancies (O_v) existing in the Co-SiOx were identified to be one of the primary contributors to the significantly enhanced catalytic activation of PMS. The cobalt substitution both creates and stabilizes the surficial O_v and forms the adequately active Co(II)-O_v pairs which engine the electron transfer process during the catalytic activities. The active Co(II)-O_v pairs weaken the average electronegativity of Co/Si and Co/O sites, resulting in the prevalent changes in final state energy, which is the main driving cause of the binding energy shifts in the X-ray photoelectron spectroscopy (XPS) spectra of Si and O among all samples. The increase of the relative proportion of Co(III) in the spent Co-SiOx probably causes the binding energy shifts of the Co XPS spectrum compared to that of the Co-SiOx. The amorphous Co-SiOx outperforms stable and quick 2,4-DCP degradation, achieving a much higher kinetic rate of 0.7139 min^-1 at pH = 7.02 than others via sulfate radical advanced oxidation processes (AOPs), photo-Fenton AOPs, H₂O₂ reagent AOPs, and other AOP approaches. The efficient degradation performance makes the amorphous Co-SiOx as a promising catalyst in removing 2,4-DCP or organic-rich pollutants.