Degradation of sulfamethazine by biochar-supported bimetallic oxide/persulfate system in natural water: Performance and reaction mechanism

A comprehensive review of the "black gold catalysts" in wastewater treatment: Properties, applications and bibliometric analysis

A significant amount of effort has been devoted to the utilization of biochar-based catalysts in the treatment of wastewater. By virtue of its abundant functional groups and high specific surface area, biochar holds significant promise as a catalyst. This article presents a comprehensive systematic review and bibliometric analysis covering the period from 2009 to 2024, focusing on the restoration of wastewater through biochar catalysis. The production, activation, and functionalization techniques employed for biochar are thoroughly examined. In addition, the application of advanced technologies such as advanced oxidation processes (AOPs), catalytic reduction reactions, and biochemically driven processes based on biochar are discussed, with a focus on elucidating the underlying mechanisms and how surface functionalities influence the catalytic performance of biochar. Furthermore, the potential drawbacks of utilizing biochar are also brought to light. To emphasize the progress being made in this research field and provide valuable insights for future researchers, a scientometric analysis was conducted using CiteSpace and VOSviewer software on 595 articles. Hopefully, this review will enhance understanding of the catalytic performance and mechanisms pertaining to biochar-based catalysts in pollutant treatment while providing a perspective and guidelines for future research and development efforts in this area.

Engineered hydrochar from waste reed straw for peroxymonosulfate activation to degrade quinclorac and improve solanaceae plants growth

Hydrochar from agricultural wastes is regarded as a prospective and low-cost material to activate peroxymonosulfate (PMS) for degrading pollutants. Herein, a novel in-situ N-doped hydrochar composite (RHCM4) was synthesized using montmorillonite and waste reed straw rich in nitrogen as pyrolysis catalyst and carbon source, respectively. The fabricated RHCM4 possessed excellent PMS activation performance for decomposing quinclorac (QC), a refractory herbicide, with a high removal efficiency of 100.0% and mineralization efficiency of 75.1%. The quenching experiments and electron spin resonance (ESR) detection disclosed free radicals (•OH, •SO4-, and •O2-) and non-radicals (1O2) took part in the QC degradation process. Additionally, the catalytic mechanisms were analyzed in depth with the aid of various characterizations. Moreover, the QC degradation intermediates and pathways were clarified by density functional theory calculations and HPLC-MS. Importantly, phytotoxicity experiments showed that RHCM4/PMS could efficaciously mitigate the injury of QC to Solanaceae crops (pepper, tomato, and tobacco). These findings give a new idea for enhancing the catalytic activity of hydrochar from agricultural wastes and broaden its application in the field of agricultural environment.

Straw-derived biochar for the removal of antibiotics from water: Adsorption and degradation mechanisms, recent advancements and challenges

Antibiotics, a kind of containments with the properties of widely distributed and difficult to degrade, has aroused extensive attention in the world. As a prevalent agricultural waste, straws can be utilized to prepare biochar (straw-derived biochar, SBC) to remove antibiotics from aquatic environment. To date, although a number of review papers have summarized and discussed research on biochar application in wastewater treatment and soil remediation, there are few reviews on SBC for antibiotic removal. Due to the limitations of poor adsorption and degradation performance of the pristine SBC, it is necessary to modify SBC to improve its applications for antibiotics removal. The maximum antibiotic removal capacity of modified SBC could reach 1346.55 mg/g. Moreover, the adsorption mechanisms between modified SBC and antibiotics mainly involve π-π interactions, electrostatic interactions, hydrophobic interactions, and charge dipole interactions. In addition, the modified SBC could completely degrade antibiotics within 6 min by activating oxidants, such as PS, PDS, H2O2, and O3. The mechanisms of antibiotic degradation by SBC activated oxidants mainly include free radicals (including SO4•-, •OH, and O2•-) and non-free radical pathway (such as, 1O2, electrons transfer, and surface-confined reaction). Although SBC and modified SBC have demonstrated excellent performance in removing antibiotics, they still face some challenges in practical applications, such as poor stability, high cost, and difficulties in recycling. Therefore, the further research directions and trends for the development of SBC and biochar-based materials should be taken into consideration.

Application of biochar in microbial fuel cells: Characteristic performances, electron-transfer mechanism, and environmental and economic assessments

Biochar is a by-product of thermochemical conversion of biomass or other carbonaceous materials. Recently, it has garnered extensive attention for its high application potential in microbial fuel cell (MFC) systems owing to its high conductivity and low cost. However, the effects of biochar on MFC system performance have not been comprehensively reviewed, thereby necessitating the evaluation of the efficacy of biochar application in MFCs. In this review, biochar characteristics were outlined based on recent publications. Subsequently, various applications of biochar in the MFC systems and their probable processes were summarized. Finally, proposals for future applications of biochar in MFCs were explored along with its perspectives and an environmental evaluation in the context of a circular economy. The purpose of this review is to gain comprehensive insights into the application of biochar in the MFC systems, offering important viewpoints on the effective and steady utilization of biochar in MFCs for practical application.

Nitrogen-doped graphene for tetracycline removal via enhancing adsorption and non-radical persulfate activation

Nitrogen-doped graphene (NG) was synthesized via direct thermal annealing treatment. The obtained NG showed outstanding removal ability for tetracycline (TC) ascribed to enhanced adsorption and persulfate activation. The maximum TC adsorption capacity calculated from the Langmuir model of NG was 227.3 mg/g, which was 1.66 times larger than nitrogen-free graphene. The coexistence of NG and persulfate (PS) exhibited complete degradation of TC within 120 min attributed to the successful modification of nitrogen. Further analysis demonstrated that non-radical electron transfer was the dominant degradation pathway, which was different from the widely acknowledgeable radical mechanism. An electron donor-mediator-acceptor system was introduced, in which TC, NG, and PS performed as electron donor, mediator, and acceptor, respectively. The potential intermediates in the TC degradation process were detected and toxicity assessment was also performed. In addition, more than 75.8% of total organic carbon was removed, and excellent reusability was manifested in multiple adsorption and degradation experiments.

Pd/MIL-100(Fe) as hydrogen activator for FeIII/FeII cycle: Fenton removal of sulfamethazine

Masses of iron sludge generated from engineering practice of classic Fenton reaction constraints its further promotion. Accelerating the FeIII/FeII cycle may be conducive to reducing the initial ferrous slat dosage and the final iron sludge. Based on the reduction of Pd/MIL-100(Fe)-activated hydrogen, an improved Fenton system named MHACF-MIL-100(Fe) was developed at ambient temperature and pressure. 97.8% of sulfamethazine, the target pollutant in this work, could be degraded in 5 min under the conditions of 20 mM H2O2, 25 μM ferrous chloride, initial pH 3.0, 2 g·L-1 composite catalyst Pd/MIL-100(Fe) and hydrogen gas 60 mL·min-1. Combining density functional theory (DFT) calculation and intermediate detection, the degradation of this antibiotic was inferred to start from the cleavage of N-S bond. The catalytic of Pd/MIL-100(Fe), demonstrated by the removal efficiency of SMT and the catalyst morphology, remained intact after six reaction cycles. The present study provides an insight into the promotion of Fenton reaction.

B-doping mediated formation of oxygen vacancies in Bi2Sn2O7 quantum dots with a unique electronic structure for efficient and stable photoelectrocatalytic sulfamethazine degradation

This study devised a straightforward one-step approach that enabled simultaneous boron (B) doping and oxygen vacancies (OVs) production on Bi₂Sn₂O₇ (BSO) (B-BSO-OV) quantum dots (QDs), optimizing the electrical structure of the photoelectrodes. Under light-emitting diode (LED) illumination and a low potential of 1.15 V, B-BSO-OV demonstrated effective and stable photoelectrocatalytic (PEC) degradation of sulfamethazine (SMT), achieving the first-order kinetic rate constant of 0.158 min^-1. The surface electronic structure, the different factors influencing the PEC degradation of SMT, and the degradation mechanism were studied. Experimental studies have shown that B-BSO-OV exhibits strong visible light trapping ability, high electron transport ability, and superior PEC performance. DFT calculations show that the presence of OVs on BSO successfully reduces the band gap, controls the electrical structure, and accelerates charge transfer. This work sheds light on the synergistic effects of the electronic structure of B-doping and OVs in heterobimetallic oxide BSO under the PEC process and offers a promising approach for the design of photoelectrodes.

Detoxification of typical nitrogenous heterocyclic compound from pharmaceutical wastewater by mixed microbial consortia

Microbial consortia HY3 and JY3 with high degradation efficiency of 2-Diethylamino-4-hydroxy-6-methylpyrimidine (DHMP) were isolated from aerobic and parthenogenic ponds of DHMP-containing pharmaceutical wastewater, respectively. Both consortia were enriched and reached stable degradation performance with a DHMP concentration of 1500 mg L^-1. The DHMP degradation efficiencies of HY3 and JY3 were 95.66% ± 0.24% and 92.16% ± 2.34% under the condition of shaking at 180 r·min^-1 and the temperature of 30 °C for 72 h. And the removal efficiencies of chemical oxygen demand were 89.14% ± 4.78% and 80.30% ± 11.74%, respectively. High-throughput sequencing results indicated that three bacterial phyla of Proteobacteria, Bacteroidetes, and Actinobacteria were dominant in both HY3 and JY3, but their dominances varied. At the genus level, the richness of Unclassified Comamonadaceae (34.23%), Paracoccus (14.75%), and Brevundimonas (13.94%) ranked top three in HY3 whereas Unclassified Comamonadaceae (40.80%), Unclassified Burkholderiales (13.81%) and Delftia (13.11%) were dominant in JY3. The metabolites of DHMP degradation by HY3 and JY3 were analyzed in detail. Two pathways for cleavage of the nitrogenous heterocyclic ring were speculated, one of which was identified for the first time in this study.

Catalytic degradation of dimethomorph by nitrogen-doped rice husk biochar

N-doped biochar is widely used for activating persulfate to degrade organic pollutants. Which type of N atom is the key factor for activation is still unclear and needs to be further explored and analyzed. In this study, four kinds of biochar were prepared using urea and rice husk as precursors, and tested for the catalytic degradation of dimethomorph. Increasing the nitrogen doping level caused the catalytic removal efficiency of dimethomorph in the presence of peroxymonosulfate increased from 16.6% to 86.8%. A correlation analysis showed that the ability of N-doped biochar to activate PMS is mainly related to the content of pyrrole N, graphite N and carbonyl and the degree of defects. In experiments on electron paramagnetic resonance and free radical suppression, the reactive species of SO₄^•-, ¹O₂,·OH and O₂^.- were detected, among which ¹O₂ was found to be the main agent in the nonradical pathway. The degradation pathways for dimethomorph were analyzed based on a total of 8 degradation products identified by high-performance liquid chromatography-time of flight mass spectrometry (HPLC-Q-TOFMS). The results of this study provide a fundamental basis for using agricultural waste to produce inexpensive and efficient nonmetal catalysts that are highly effective in reducing dimethomorph levels in agricultural lands.

Green valorization of end-of-life toner powder to iron oxide-nanographene nanohybrid as a recyclable persulfate activator for degrading emerging micropollutants

The sustainable management of toner waste (T-raw) was performed via carbonization at 500 °C (T-500) and 600 °C (T-600) to produce iron oxide-nanographene nanohybrid (FeO-NG) for activating persulfate (PS) to efficiently degrade dyes (methylene blue, MB), antibiotics (sulfamethazine, SMZ), and pesticides (diazinon, DZN). Morphology, crystallinity, chemical structure, chemical composition, surface area, and pore size distribution of the synthesized materials were investigated using various analyses. High degradation ratios of MB were attained over a wide pH range (2-7), and the optimum operating conditions were determined. The FeO-NG/PS system was tested in different water matrices. MB degradation efficiency dropped from 80.13% to 78.56% after five succeeding experiments, proving the high stability of T-500. Trapping experiments proved the major role of sulfate radicals and the minor contribution of singlet oxygen. The toxicity evaluation of the treated and untreated MB solutions was conducted via measuring the cell viability, showing an increase in cell viability ratio after the degradation of MB. The degradation efficiencies of DZN and SMZ were 97.54% and 83.7%, respectively and the mineralization ratios were 74.08% and 60.37% at initial concentrations of sulfamethazine and diazinon of 50 and 100 mg/L, respectively. The high degradation efficiency of emerging micropollutants as well as the inexpensiveness, and facile synthesis of the catalyst boost the prospect of applying the proposed system on an industrial scale.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Assessment of sulfidated nanoscale zerovalent iron for in-situ remediation of cadmium-contaminated acidic groundwater at a zinc smelter

Unprecedented high concentrations of heavy metals have been detected in the groundwater at a zinc smelter in Seokpo, South Korea. The outflow of the contaminated groundwater into the nearby Nakdong River must be prevented by some means such as permeable reactive barrier (PRB). As a reactive material for injection-type PRB, we have tested sulfidated nanoscale zerovalent iron (S-nZVI) to assess its efficacy in remediating the groundwater from the smelter. The S-nZVI efficiently removed Zn, Ni, and Al in the groundwater, and neutralized the groundwater to pH > 6. Sulfidation of nZVI greatly increased the removal of Cd (99.8%) compared to that by nZVI (7.2%). MINEQL+ modeling and particle characterization were performed to elucidate the forms of heavy metals in the solution and on the surface of S-nZVI. Raman and XPS results suggested that FeS on the surface of S-nZVI reacted with Cd(II) and Zn(II), forming more-stable CdS and ZnS. Sequential application of NaHCO₃ after S-nZVI treatment in a column setup was suited for the removal of remaining Zn and Fe as well as the reduction of microbial toxicity. This study guides to use of S-nZVI for in-situ remediation of cadmium-contaminated groundwater with other coexisting heavy metals from a zinc smelter.

Amorphous Co@TiO2 heterojunctions: A high-performance and stable catalyst for the efficient degradation of sulfamethazine via peroxymonosulfate activation

Persulfate-based advanced oxidation processes (AOPs) cannot easily achieve the efficient degradation of persistent organic pollutants (POPs) with high stability. In this study, a simple in situ precipitation method was used to prepare an amorphous Co@TiO₂ heterojunction catalyst. The deposition of Co oxide on TiO₂, which is relatively nontoxic, efficiently activated peroxymonosulfate (PMS) to degrade sulfamethazine (SMT) and reduce the leaching of Co ions (0.915%). A catalytic system prepared using 0.3 g L^-1 Co@TiO₂ and 0.5 g L^-1 PMS could degrade SMT within 30 min with a degradation rate of 95.8%. Co@TiO₂ could activate PMS over a wide pH range (5.00-9.00) to efficiently degrade other antibiotics and dyes. Radical-capture experiments and electron paramagnetic resonance analysis suggested that SMT degradation occurs through a combination of the free radical and non-radical pathways, in which singlet ¹O₂ played a major role. Owing to the novelty of the proposed composite materials, the degradation path of SMT, which was determined through liquid chromatography-mass spectrometry, differed from that reported previously. This study provides not only an advanced and renewable catalyst for SMT degradation but also a feasible strategy for designing materials for AOPs.

Application of sludge biochar nanomaterials in Fenton-like processes: Degradation of organic pollutants, sediment remediation, sludge dewatering

In today's society, wastewater sludge has become solid waste, and the preparation of wastewater sludge into sludge biochar nanomaterials (SBCs) for resource utilization has become a promising method. SBCs have advantages over other biomasses, including their complex composition, wide range of raw materials, and especially the presence of various transition metals with catalytic properties. Heterogeneous Fenton processes using SBCs as catalyst carriers have shown great potential in the removal of pollutants. In this review, the synthesis methods of SBCs are reviewed and the effects of different synthesis methods on their physicochemical properties are discussed. Furthermore, the successful applications of raw SBCs, metal-modified SBCs, and Fenton sludge-SBCs in organic pollutant degradation, sediment remediation, and sludge dewatering are reviewed. The mechanisms occurring with different metals as active sites are explored, and the review shows that the degradation efficiency and stability of SBCs are very satisfactory. We also provide an outlook on the future development of SBCs. We hope that this review will help readers gain a clearer and deeper understanding of SBCs and promote the development of SBCs.

Spent LiFePO4: An old but vigorous peroxymonosulfate activator for degradation of organic pollutants in water

Iron-based catalysts have been demonstrated to activate peroxymonosulfate (PMS) to generate reactive radicals, which is however limited by their complex preparation process, high costs and inefficiency for practical applications. Herein we obtain spent LiFePO₄ (SLFP), with powerful catalytic capacity by a simple one-step treatment of the retired LiFePO₄ cathode material, for PMS activation to decontaminate organic pollutants. Lithium defects and oxygen vacancies in SLFP play critical roles for PMS utilization, further confirmed by density functional theory (DFT) calculations. SLFP materials rapidly adsorb PMS, and the surface PMS is activated by Fe(II) to generate radicals, with ^•OH playing a major role for the degradation of organics after multi-step reactions. The SLFP/PMS process is finally validated for ability to remove organic contaminants and potential environmental application.

Single-atom Ru loaded on layered double hydroxide catalyzes peroxymonosulfate for effective E. coli inactivation via a non-radical pathway: Efficiency and mechanism

The Fenton-like processes are considered to be one of the most promising strategies for inactivating bacteria due to their capacity to produce reactive oxygen species (ROS). Herein, a catalytic system for efficient inactivation of Escherichia coli (E. coli) was developed by anchoring single-atom Ru on layered double hydroxides (LDH). The Ru/NiFe-LDH catalyst showed excellent performance in activating peroxymonosulfate (PMS) to inactivate E. coli. Under the combined action of the ultra-low concentrations of Ru/NiFe-LDH (40 mg/L) and PMS (5 mg/L), 7 log E. coli can be totally inactivated within 90 s. This was attributed to the combined effect of single-atom Ru adsorption to E. coli and the ROS produced in situ. Mechanism studies indicated that the ¹O₂ with electrophilic properties was the key active species responsible for the rapid inactivation of E. coli. The E. coli inactivation process suggested that the ROS produced first attacked the outer membrane of the cell, then the antioxidant enzymes in the cell were induced, the macromolecule substances were released and mineralized, eventually leading to irreversible cell death. This work firstly loads monoatomic Ru on LDH for bacterial inactivation, providing a feasible method for rapid inactivation of E. coli.

A pH-Stable TbIII-Based Metal-Organic Framework as a Turn-On and Blue-Shift Fluorescence Sensor toward Benzaldehyde and Salicylaldehyde in Aqueous Solution

A new polydentate tetracarboxylic acid with a benzothiadiazole unit (4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid), H₄BTDBA) has been used to prepare a pH-stable three-dimensional Tb^III-based metal-organic framework (MOF) with the formula {[(CH₃)₂NH₂]_0.7[Tb₂(BTDBA)_1.5(lac)_0.7(H₂O)₂]·solvents}_n (Hlac = lactic acid, JXUST-19). JXUST-19 exhibits a new (4,4,12)-connected topology based on tetranuclear [Tb₄] clusters. JXUST-19 can remain stable when soaked in water for at least 1 week and in aqueous solutions with various pH values (2-12) for 24 h. Fluorescence study indicates JXUST-19 can be employed as a rare turn-on and blue-shift MOF sensor toward benzaldehyde (BZ) and salicylaldehyde (SA). To date, JXUST-19 represents the first Tb^III-based turn-on MOF sensor toward salicylaldehyde in aqueous solution, and the fluorescence enhancement and naked-eye detection of BZ have been rarely reported. In addition, JXUST-19 based fluorescent test papers, light-emitting diode lamp beads, and portable composite films were developed to realize naked-eye detection of BZ and SA, which has great potential in practical applications.

Insights on ball milling enhanced iron magnesium layered double oxides bagasse biochar composite for ciprofloxacin adsorptive removal from water

Both ciprofloxacin (CIP) and sugarcane bagasse have brought enormous pressure on environmental safety. Here, an innovative technique combining Fe-Mg-layered double oxides and ball milling was presented for the first time to convert bagasse-waste into a new biochar adsorbent (BM-LDOs-BC) for aqueous CIP removal. The maximum theoretical adsorption capacity of BM-LDOs-BC reached up to 213.1 mg g^-1 due to abundant adsorption sites provided by well-developed pores characteristics and enhanced functional groups. The results of characterization, data fitting and environmental parameter revealed that pore filling, electrostatic interactions, H-bonding, complexation and π-π conjugation were the key mechanisms for CIP adsorptive removal. BM-LDOs-BC exhibited satisfactory environmental safety and outstanding adsorption capacity under various environmental situations (pH, inorganic salts, humic acid). Moreover, BM-LDOs-BC possessed excellent reusability. These superiorities illustrated that BM-LDOs-BC was a promising adsorbent and created a new avenue for rational placement of biowaste and high-efficiency synthesis of biochar for antibiotic removal.

Is biochar a reliable catalyst for activating peroxydisulfate? Damage of biochar during catalytic process

The unsatisfactory reuse performance of biochar in the catalytic system has become an important factor limiting its application. Damage of biochar in the catalytic systems has been reported, but the mechanism of damage is still unclear. In this study, cotton stalk and walnut shell biochar were used to activate peroxydisulfate (PDS) for sulfamethazine degradation, and multiple characterization methods were used to determine the damage of biochar. The comparative experiments of biochar, recycled biochar, and the biochar treated by PDS in catalytic reaction showed that the performance of biochars decreased by 37.5%-65.3%. After the catalytic reaction, the unstable carbon in biochar was lost, and the biochar surface was oxidized, which reduced its affinity to organic matter. CO₂ physisorption showed that the pore structure of biochars barely changed. However, for walnut shell biochar, its adsorption capacity of nitrogen decreased obviously. Moreover, the electrochemical tests showed that the conductivity of walnut shell biochar decreased, which would lead to the reduction of its catalytic performance through the electron transfer path. Overall, the effects of catalytic process on the performance of biochar cannot be ignored. Therefore, more efforts are needed to improve the stability and homogeneity of biochar as an efficient and sustainable PDS activator.

The application of transition metal-modified biochar in sulfate radical based advanced oxidation processes

Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) is a very important chemical oxidation technology for the degradation of recalcitrant organic pollutants in water and has been well developed. Recently, transition metals or their oxides-modified biochar has been widely used as the catalyst to catalyze peroxymonosulfate (PMS) and peroxydisulfate (PS) in SR-AOPs due to their outstanding properties (e.g., large surface area, high stability, abound catalytic sites, and diversity of material design, etc.). These composite materials not only combine the respective beneficial characteristics of biochar and transition metals (or their oxides) but also often present synergistic effects between the components. In this review, we present the synthesis of different types of transition metal (or metal oxides)/biochar-based catalysts and their application in SR-AOPs. The catalytic mechanism, including the generation process of free radicals and other reaction pathways on the surface of the catalyst were also carefully discussed. Particular attention has been paid to the synergistic effects between the components that result in enhanced catalytic performance. At the end of this review, the future development prospects of this technology are proposed.

Sulfur or nitrogen-doped rGO supported Fe-Mn bimetal - organic frameworks composite as an efficient heterogeneous catalyst for degradation of sulfamethazine via peroxydisulfate activation

In this work, sulfur/nitrogen modified reduced graphene oxide (S/N-rGO) was employed as both electron shuttle and support to fabricate Fe-Mn bimetallic organic framework@S/N-rGO hybrids (BOF@S/N-rGO) via a facile two-step solvothermal route. Compared with the transition metal ions (Fe²⁺/Mn²⁺), the classical metal oxide catalyst (Fe₂O₃ and Fe₃O₄) and nano zero-valent iron (nZVI), BOF@S/N-rGO catalyst can more effectively activate peroxydisulfate (PDS) with ultra-low concentration (0.05 mM) to degrade sulfamethazine (SMT). Quenching experiments, electron paramagnetic resonance (EPR) measurement and linear sweep voltammetry (LSV) showed that the activation pathways of PDS between the two catalysts were different. In BOF@N-rGO+PDS system, the degradation of SMT was mainly attributed to the oxidation of radicals including SO₄^•- and •OH, especially SO₄•- . However, in BOF@S-rGO+PDS system, in addition to the radical pathway, there are also non-radical pathways, namely ¹O₂ and direct electron transfer. Furthermore, the applicability of BOF@S/N-rGO used in the PDS-mediated advanced oxidation processes (AOPs) was systematically investigated in terms of the effects of operating parameters and coexisting substance (anions and humic acid (HA)), the degradation of other pollutants, as well as the stability and reusability of the catalyst. This study proved that BOF@S/N-rGO was a promising activator of PDS with ultra-low concentration for the degradation of SMT.

Enabling dual valorization of lignocellulose by fluorescent lignin carbon dots and biochar-supported persulfate activation: Towards waste-treats-pollutant

The rationally-designed lignocellulose valorization that promotes a novel "waste-treats-pollutant" standpoint is highly desired yet still challenging for the spread of biomass industry. At this point, a cascade technique with the assistance of deep eutectic solvent (DES) fractionation is tailored to dually valorize wheat straw into fluorescent lignin carbon dots (LCDs) and bimetallic Mg-Fe oxide-decorated biochar (MBC) via solvothermal engineering and co-precipitation/pyrolysis respectively. Benefitting from the abundance of β-aryl ether and hydroxyl groups in DES-extracted lignin, the photoluminescence LCDs emit blue color in a wide excitation span, which can be adopted to selectively detect ferric ions (Fe³⁺) in a broad dosage scale with a highly linear correlation of 10-50 μM. Taking advantages of the MBC-aided persulfate activation, we propose the efficient arbidol removal system with a universal concentration of 20-200 ppm in the scalable pH ranging from 3 to 11. The dominate migration pathways involving with active oxygen species and surface electron transfer are comprehensively studied via electron paramagnetic resonance, radical-quenching experiments, and theoretical arithmetic. With the endeavor of biorefineries, this full-scale platform ignites the dazzling wildfire from dual lignocellulose valorization that will also seek its accurate position in the kingdoms of functional materials and wastewater restoration.

A comprehensive review on persulfate activation treatment of wastewater

With increasingly serious environmental pollution and the production of various wastewater, water pollutants have posed a serious threat to human health and the ecological environment. The advanced oxidation process (AOP), represented by the persulfate (PS) oxidation process, has attracted increasing attention because of its economic, practical, safety and stability characteristics, opening up new ideas in the fields of wastewater treatment and environmental protection. However, PS does not easily react with organic pollutants and usually needs to be activated to produce oxidizing active substances such as sulfate radicals (SO₄^-) and hydroxyl radicals (OH) to degrade them. This paper summarizes the research progress of PS activation methods in the field of wastewater treatment, such as physical activation (e.g., thermal, ultrasonic, hydrodynamic cavitation, electromagnetic radiation activation and discharge plasma), chemical activation (e.g., alkaline, electrochemistry and catalyst) and the combination of the different methods, putting forward the advantages, disadvantages and influencing factors of various activation methods, discussing the possible activation mechanisms, and pointing out future development directions.

Comparative study on heterogeneous activation of peroxydisulfate and peroxymonosulfate with black carbon derived from coal tar residues: Contribution of free radical, 1O2 and surface-bound radicals

Carbon materials draw increasing attention as metal-free catalysts for persulfates activation. Herein, the potential of black carbon (BC) derived from coal tar residues on heterogeneous activation of peroxydisulfate (PDS) and peroxymonosulfate (PMS) to eliminate organic pollutants was investigated. Compared with UV/persulfates systems, persulfates/BC systems degraded 3 selected phenolic compounds (i.e. phenol, 4-chlorophenol (4-CP) and bisphenol A (BPA)) with an order of magnitude higher oxidation rates, and removed dissolved organics (DOC) with over 27% higher efficiency. In the PDS/BC system, ¹O₂ and surface-bound radicals were proved to be the dominant active species, while free radicals, ¹O₂, and surface-bound radicals were responsible for organics oxidation in the PMS/BC system. Relative contribution of different reactive species in persulfates/BC systems was pH-dependent. Surface oxygen functionalities of BC were involved in ¹O₂ generation, and its structural defects played a critical role in forming free radicals and surface-bound radicals. This study provided an in-depth insight into carbon-driven persulfates activation processes.

Effects of biochar-based materials on the bioavailability of soil organic pollutants and their biological impacts

Motivated by the unique structure and superior properties, biochar-based materials, including pristine biochar and composites of biochar with other functional materials, are considered as new generation materials for diverse multi-functional applications, which may be intentionally or unintentionally released to soil. The influencing mechanism of biochar-based material on soil organisms is a key aspect for quantifying and predicting its benefits and trade-offs. This work focuses on the effects of biochar-based materials on soil organisms within the past ten years. 206 sources are reviewed and available knowledge on biochar-based materials' impacts on soil organisms is summarized from a diverse perspective, including the pollutant bioavailability changes in soil, and potential effects of biochar-based materials on soil organisms. Herein, effects of biochar-based materials on the bioavailability of soil organic pollutants are detailed, from the perspective of plant, microorganism, and soil fauna. Potential biological effects of pristine biochar (PBC), metal/metal compounds-biochar composites (MBC), clay minerals-biochar composites (CMBC), and carbonaceous materials-biochar composites (CBC) on soil organisms are highlighted for the first time. And possible mechanisms are presented based on the different characters of biochar-based materials as well as various environmental interactions. Finally, the bottleneck and challenges of risk assessment of biochar-based materials as well as future prospects are proposed. This work not only promotes the development of risk assessment system of biochar-based materials, but broadens the strategy for the design and optimization of environmental-friendly biochar materials.

Activation of peroxymonosulfate by a floating oxygen vacancies - CuFe2O4 photocatalyst under visible light for efficient degradation of sulfamethazine

In this study, expanded perlite supported oxygen vacancies-CuFe₂O₄ (OVs-CFEp) was synthesized via a simple method and utilized as floating catalyst to activate peroxymonosulfate (PMS) for the removal of sulfamethazine (SMT) under visible light irradiation. OVs-CFEp/Vis/PMS synergy presents much superior performance than that of OVs-CFEp/Vis system and OVs-CFEp/PMS system. PMS was efficiently activated by OVs-CFEp at a wide range of pH values, while the degrading rate of SMT was up to 95% in OVs-CFEp/Vis/PMS system. Oxygen vacancies and ·O₂^- accelerated the conversion of Fe(III)/Fe(II) and Cu(I)/Cu(II). The combination of the floating loader boosted light absorption capacity and sufficiently prevented metal ions leaching, which was all beneficial to enhance catalytic performance and recyclability. Besides, the reactive oxygen species were investigated systematically, proving that visible light and OVs-CFEp could activate PMS to produce ·SO₄^-, ·OH, O₂·^-, and ¹O₂ reactive species. Furthermore, based on intermediates identification and Density Functional Theory (DFT) calculation, three types and seven main degradation pathways involving cleavage of bond, SMT molecular rearrangement, and hydroxylation reaction were proposed. So this high photo-absorbing catalyst coupling with advanced oxidation progress was promising for extensive environmental remediation.

Degradation of sulfamethazine in water by sulfite activated with zero-valent Fe-Cu bimetallic nanoparticles

In this work, zero-valent Fe-Cu bimetallic nanoparticles were synthesized using a facile method, and applied to activate sulfite for the degradation of sulfamethazine (SMT) from the aqueous solution. The key factors influencing SMT degradation were investigated, namely the theoretical loading of Cu, Fe-Cu catalyst dosage, sulfite concentration and initial solution pH. The experimental results showed that the Fe-Cu/sulfite system exhibited a much better performance in SMT degradation than the bare Fe⁰/sulfite system. The mechanism and possible degradation pathway of SMT in Fe-Cu/sulfite system were revealed. The reactive radicals that played a dominant role in the SMT degradation process were •OH and SO₄^•-, while the loading of Cu induced the synergistic effect between Fe and Cu. The redox cycle between Cu(I)/Cu(II) remarkably contributed to the conversion of Fe(III) to Fe(II), greatly enhancing the catalytic performance of Fe-Cu bimetal. In real groundwater applications, the Fe-Cu/sulfite system also exhibited satisfactory SMT degradation. The 30-day aging tests of Fe-Cu particles demonstrated that the aging of catalyst was not obviously affecting the removal of SMT. Furthermore, the reusability of catalyst was evidenced by the recycling experiments. This study provides a promising application of bimetal activated sulfite for enhanced contaminant degradation in groundwater.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Layered double hydroxides functionalized by carbonaceous materials: from preparation to energy and environmental applications

Along with the exponential demand for energy and pollution-free-environment, layered double hydroxides (LDHs) have gained extensive explorations because of their diverse nanostructures and tunable elemental compositions. However, the applications of LDHs are hindered by their poor activity, sluggish mass transfer, and aggregation. LDHs functionalized by carbonaceous materials (CMs) (LDH-CM) are expected to overcome the above disadvantages and even generate more excellent performance. This review first analyzes the research evolvement of LDH-CM composites during the past 25 years. Next, the advantages of LDH-CM composites are highlighted, such as morphology optimization, high electrical conductivity, more stable, good heat, and mass transfer performance. Following the synthetic strategies, including chemical assembly of LDHs and CMs, direct growth of LDH on CMs (two-step nucleation and growth and surface-confined growth) and direct CM formation on LDHs are fully discussed. Then, the recent progress achieved in LDH-CM composites for the application of energy storage and environmental protection is summarized in detail. In particular, the review illustrates the reasons why these constructing strategies can improve the performance of LDH-CM composites. Finally, challenges and future research prospects of LDH-CM composites are highlighted.

Biochar in the 21st century: A data-driven visualization of collaboration, frontier identification, and future trend

The massive amounts of publication data are highly valuable, because in addition to the advancement in science, technology, and policy, such data can provide critical information and guidance on what have been published, what topical changes have evolved, and what are the trending fields deserving more attention. In the 21st century, biochar has played an indispensable role in the long-term global development strategies in response to "Carbon neutralization", "Agricultural management", and "Environmental restoration", and accumulated many high-quality publications. Herein, this study provides a new data-driven bibliometric analysis strategy and framework for mining the core content of massive literature data, and aims at bringing unique insights for the research prospects as well as opportunities of biochar. The results show that biochar researches have made great progress from 1999 to 2020, but cross-disciplinary teamwork should be further emphasized. The research frontier identification reveals that sewage treatment, efficient removal, and functional composite materials will be the issues which must be paid continual attention at present and in the future. Furthermore, studies on global climate impact, biomass resource utilization, carbon sequestration, carbon cycle, and even the negative effects of biochar have gradually begun to be taken seriously.

Enhancement of E. coli inactivation by photosensitized erythrosine-based solar disinfection under weakly acidic conditions

Cost-effective disinfection technology is urgently needed in poor rural areas. Erythrosine (ERY)-based solar disinfection (SODIS) provides a promising solution because of its effective inactivation of viruses and gram-positive bacteria at low cost. However, the poor gram-negative bacteria (G^-, e.g., Escherichia coli) inactivation of photosensitized ERY inhibits its application. Herein, for the first time, the protonation of ERY was found to greatly enhance its G^- inactivation, and 99.99999% (7.0 log) of E. coli were completely inactivated within only 30 s using 2.5 mg/L ERY under 200 mW/cm² visible light irradiation. The inactivation rate constant (k) reached 17.5 min^-1 at pH 4.0, which was 4730 times higher than that at pH 7.0. At a lower pH, more severe cell wall and genomic DNA damage was observed. A linear correlation between k and monoanionic ERY (HE^-) content was obtained, indicating that HE^- rather than dianionic ERY (E^2-) participated in the inactivation at pH 5.0-7.0, which was further explained by the higher production of reactive oxygen species and bacterial adsorption of HE^- than E^2-. Both ¹O₂ and O₂^-• dominated bacterial inactivation, contributing 56.8% and 43.2%, respectively. O₂^-• but not ¹O₂ caused ERY photobleaching. OH• was not involved in either inactivation or photobleaching. Humic acid and salts (NaCl, Na₂SO₄, CaCl₂, and MgCl₂) slightly inhibited inactivation, while NaHCO₃ accelerated inactivation. Complete inactivation (99.9999%) of E. coli was achieved within ∼30 min at pH 5.0 in ERY-based SODIS with good adaptation to various water matrices and weather (sunny or partly cloudy). This work will help to promote the application of ERY-based disinfection especially for SODIS in poor rural areas.

Enhanced sorption of trivalent antimony by chitosan-loaded biochar in aqueous solutions: Characterization, performance and mechanisms

Contamination of aquatic systems by antimony (Sb) is a worldwide issue due to its risks to eco-environment and human health. Batch sorption experiments were conducted to assess the equilibrium, kinetics and thermodynamics of antimonite [Sb(III)] sorption by pristine biochar (BC) and chitosan-loaded biochar (CHBC) derived from branches of Ficus microcarpa. Results showed the successful loading of chitosan onto biochar surface, exhibiting more functional groups (e.g., CO, -NH₂, and -OH). Langmuir model well described the Sb(III) sorption isotherm experimental data, and the maximum sorption capacity of Sb(III) by CH₁BC (biochar loaded with chitosan at a ratio of 1:1) was 168 mg g^-1, whereas for the BC it was only 10 mg g^-1. X-ray photoelectron spectroscopy demonstrated that CH₁BC oxidized 86% of Sb(III) to Sb(V), while BC oxidized 71% of Sb(III). Density functional theory calculations suggested that the synergistic effect of exogenous hydroxyl and inherent carbonyl contributed to the enhanced removal efficiency of Sb(III) by CHBC. Key mechanisms for Sb(III) sorption onto CHBCs included electrostatic interaction, chelation, surface complexation, π-π interaction, and hydrogen bonding. Overall, this study implies that CHBC can be a new, viable sorbent for the removal of Sb(III) from aquatic systems aiding their safe and sustainable management.

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Mechanism for biodegradation of sulfamethazine by Bacillus cereus H38

Degradation of sulfonamides (SAs) by microorganisms has become a focus of current research. Sulfamethazine (SMZ) is a type of SA widely used in the livestock and poultry industry. However, understanding the intermediate products, degradation pathways and mechanism of SMZ biodegradation is limited at present. In this study, a SMZ degrading bacterium Bacillus cereus H38, which can use SMZ as its only carbon source, was isolated from farmland soil. The bacterium was gram-positive with rod-shaped cells. The effects of initial SMZ concentration, pH, temperature and amount of inoculation on the biodegradation of SMZ were investigated by a single factor experiment. The results showed that the maximum degradation rate of SMZ was achieved in the environmental conditions at an initial SMZ concentration of 5 mg/L, pH of 7.0, temperature of 25 °C and inoculation amount of 5%. Under these optimum degradation conditions, strain H38 can completely degrade SMZ within 3 days. The effects of intracellular enzymes, extracellular enzymes and periplasmic enzymes on the SMZ degradation process were compared. It was found that intracellular enzymes contributed the most to the biodegradation of SMZ, and the degradation rate approached 70%. Three possible intermediates were identified by LC-MS/MS, and two degradation pathways were proposed. Whole genome sequencing results showed that the genome size of strain H38 was 5,477,631 bp, including 5599 coding sequences (CDSs), and the GC content was 35.21%. In addition, functional annotation of CDSs was performed to analyze the metabolic pathways of nitrogen and sulfur in strain H38 combining genomics and bioinformatics. This study proposes new insights into the mechanism for biodegradation of SAs and will inform future research.

Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen (¹O₂) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism.

Synergistic oxytetracycline adsorption and peroxydisulfate-driven oxidation on nitrogen and sulfur co-doped porous carbon spheres

Metal-free carbonaceous catalysts are receiving increasing attention in wastewater treatment. Here, nitrogen and sulfur co-doped carbon sphere catalysts (N,S-CSs₉₀₀-OH) were synthesized using glucose and L-cysteine via a hydrothermal method and high temperature alkali activation. The N,S-CSs₉₀₀-10%-OH exhibited excellent catalytic performance for the degradation of oxytetracycline (OTC). The degradation rate was 95.9% in 60 min, and the reaction equilibrium rate constant was 0.0735 min^-1 (k_0-15 min). The synergistic effect of adsorption-promoting degradation was demonstrated in the removal process of OTC. The excellent adsorption capacity of N,S-CSs₉₀₀-10%-OH ensured the efficient oxidation of OTC. N,S-CSs₉₀₀-10%-OH reduced the activation energy of the OTC degradation reaction (Ea=18.23 kJ/mol). Moreover, the pyrrolic N, thiophene S and carbon skeleton played an important role in the degradation of OTC based on density function theory, and the catalytic mechanism was expounded through radical and nonradical pathways. The active species involved in the reaction were O₂^•-, ¹O₂, SO₄^•- and •OH, of which O₂^•- was the primary reactive species. This study provides a new insight into the reaction mechanism for efficient treatment of organic pollutants using metal-free doped porous carbon materials.

Tailoring biochar for persulfate-based environmental catalysis: Impact of biomass feedstocks

Biochar, a carbonaceous material with engineering potential, has gained attention as an efficient catalyst in persulfate-based advanced oxidation processes (PS-AOPs). Although biomass feedstocks are known as a critical factor for the performance of biochar, the relationship between the catalytic efficiency/mechanism and the types of biomass feedstocks is still unclear. Thus, according to recent advances in experimental and theoretical researches, this paper provides a systematic review of the properties of biochar, and the relationship between catalytic performance in PS-AOPs and biomass feedstocks, where the differences in physicochemical properties (surface properties, pore structure, etc.) and activation path of different sourced biochars, are introduced. In addition, how the tailoring of biochar (such as heteroatomic doping and co-pyrolysis of biomass) affects its activation efficiency and mechanism in PS-AOPs is summarized. Finally, the suitable application scenarios or systems of different sourced biochars, appropriate methods to improve the catalytic performance of different types of biochar and the prospects and challenges for the development of biochar in PS-AOPs are proposed.

Adsorption and catalytic degradation of organic contaminants by biochar: Overlooked role of biochar's particle size

Biochar (BC) is considered as a promising adsorbent and/or catalyst for the removal of organic contaminants. However, the relationship between the particle size of BC and its adsorption/catalysis performance is largely unclear. We therefore investigated the influence of particle size on the performance of BC pyrolyzed at 300-900 °C in trichloroethylene (TCE) adsorption and persulfate (PS) activation for sulfamethazine (SMT) degradation. The results showed that high-temperature pyrolyzed BC (BC900) presented superior adsorption capacity for TCE and excellent catalytic activity for PS activation to degrade SMT. Compared to 150-250 µm, 75-150 µm and pristine BC900, 0-75 µm BC900 showed the highest TCE adsorption efficiency, which increased by 19.5-62.3%. Similarly, SMT removal by BC900/PS systems also increased from 24.2% to 98.3% with decreasing BC particle size. However, the catalytic activity of BC after grinding was not significantly improved as expected, indicating the properties of biochar was not only controlled by size effect. Characterization measurements proved that small-sized BC tended to have larger specific surface area, more micropores, higher conductivity, rich graphitic domains and surface redox-active functional groups, thus resulting in an enhanced adsorption and catalytic ability of BC.

The sorption and short-term immobilization of lead and cadmium by nano-hydroxyapatite/biochar in aqueous solution and soil

In this study, the composite materials using different ratios of biochar (BC) to nano-hydroxyapatite (nHAP) were prepared for the remediation of lead (Pb) and cadmium (Cd) contaminated water and soil. The sorption and the immobilization experiments indicated a higher sorption capacity and immobilization efficiency of Pb compared to those of Cd. The characteristics of XRD, FTIR, SEM, and XPS manifested that dissolution-precipitation, cation exchange, complexation, and cation-π interaction were the main four mechanisms for the sorption of Pb²⁺ and Cd²⁺ using composite material PC1 (nHAP/BC = 1/1). From semi-quantitative analysis, the mineral effect accounted for the majority of the immobilization of Pb and Cd. Due to obvious Pb-precipitates in the sorbed material, dissolution-precipitation primarily affected the sorption of Pb using PC1, while the immobilization of Cd was mainly attributable to cation exchange. Such results corresponded to the stable Pb-precipitates and unstable Cd-compounds in soil, among which the latter was prone to be released into the environment. The sorption capacity in aqueous solutions and the immobilization efficiencies in the soil for both Pb and Cd increased with the addition of nHAP, which were linearly correlated to the nHAP proportion in the composite materials. In future practical applications, the percentages of composite materials can be designed according to the specific pollutant concentration. This study sheds light on the explicit immobilization mechanisms for Pb and Cd in aqueous solutions to better understand their behaviors in the soil remediated by relevant materials.

Lignocellulosic biomass derived N-doped and CoO-loaded carbocatalyst used as highly efficient peroxymonosulfate activator for ciprofloxacin degradation

Burning lignocellulosic biomass wastes in an outdoor atmosphere has placed heavy burden on ecological environment and increased risk on human health. Converting solid agricultural wastes into functional materials is a research hotspot. In this study, N-doped and CoO-loaded carbocatalyst (CoO-N/BC) was successfully synthesized from the cotton stalk biomass via a simple synthesis process of impregnation and carbonization. Compared with cotton stalk biomass derived pristine biochar, the CoO-N/BC possessed a higher specific surface area (466.631 m² g^-1vs 286.684 m² g^-1) as well as a better catalytic performance in the activation of peroxymonosulfate (PMS) for CIP degradation. The superior catalytic efficiency was ascribed to the directional flow of electrons on the well-organized carbon network of CoO-N/BC, which accelerated electron migration and improved electron conduction ability. Based on the results of radical quenching experiment and electron paramagnetic resonance (EPR), both radical and non-radical process conjointly led to the stepwise decomposition of CIP, and singlet oxygen (¹O₂) mediated non-radical pathway was discovered to play a dominant role. Besides, the carbon-bridge mediated non-radical pathway was proved to accelerate this degradation process through the experiments of prolong the time of adding CIP at different time intervals. Nitrogen doped sites and CoO active sites as well as defects formed in sp²-hybridized carbon network were supposed to be the active sites for PMS. Furthermore, EIS and LSV were employed to confirm the electron transfer mediated non-radical process of reaction system. This work provides a modified strategy for the disposition of lignocellulosic biomass wastes and illuminates the underlying mechanism of heterogeneous catalysis by CoO-N/BC.

Stimulation of phenanthrene and biphenyl degradation by biochar-conducted long distance electron transfer in soil bioelectrochemical systems

The bioelectrochemical degradation of organic pollutants has attracted considerable attention owing to its remarkable sustainability and low cost. However, the application of bioelectrochemical system (BES) for the degradation of pollutants in soils is hindered by limitations in the effective distance in the soil matrix. In this study, a biochar-amended BES was constructed to evaluate the degradation of organic pollutants. This system was expected to extend the electron transfer distance via conductive biochar in soils. The results showed that biochar pyrolyzed at 900 °C facilitated the degradation of phenanthrene (PHE) and biphenyl (BP) in the soil BES (SBES), reaching 86.4%-95.1% and 88.8%-95.3% in 27 days, respectively. The effective distance of SBESs was estimated to be 154-271 cm away from the electrode, which increased 1.9-3 fold after the addition of biochar. Microbial community and functional gene analysis confirmed that biochar enriched functional degrading bacteria. These findings demonstrate that the promotion of long-distance electron transfer and the formation of soil conductive networks can be achieved by biochar amendment. Thus, this study provides a basis for the effective degradation of for persistent organic pollutants in petroleum-contaminated soils using bioelectrochemical strategy.

Global evolution of research on green energy and environmental technologies:A bibliometric study

To better grasp developments and trends in research on green energy and environmental technologies, the published literatures in the Web of Science Core Collection database from 1998 to 2020 were utilized to reveal critical information and guidance on what has been investigated, and what are the changes in research interests using a bibliometric method. Herein, yearly quantitative distribution of literatures, author contribution and collaboration, productive and influential institutions and countries/territories, co-citation analysis, keywords co-occurrence analysis, and research frontier identification are analyzed via information visualization technology. The results show that the publications on green energy and environmental technologies have grown exponentially, that China, the USA, and Italy are the most active countries, but the global cooperation is not close at present. The research frontier identification results reveal that the categories of energy, wastewater, and performance remain stable, while the trending up and emerging categories of catalyst and CO₂ emission show clear shift over the last decade, indicating that catalytic production of clean energy and value-added chemicals, strategies to reduce greenhouse gas emissions, and other related studies to solve the global energy crisis and environmental problems are the research frontiers. This bibliometric study provides unique insights and offers research guidance on green energy and environmental technologies.

Immobilization of cadmium in contaminated soils using sulfidated nanoscale zero-valent iron: Effectiveness and remediation mechanism

Sulfidated nanoscale zero-valent iron (S-nZVI) has shown excellent removal capacity for the removal of cadmium (Cd) in aqueous phase. Herein, the effectiveness and the mechanism of S-nZVI for the remediation of Cd contaminated soil were investigated for the first time. The results of sequential extraction procedures (SEP) showed that the exchangeable (EX) Cd was decreased by over 97.6% at the optimal dosage of 5 g kg^-1 S-nZVI during 30 d incubation and converted to less available Cd such as iron-manganese oxides-bound (OX) and organic matter-bound (OM) fractions. pH has negligible effect on the immobilization of Cd in soil, since OX fraction was stabilized in the range of 72-92% at initial soil pH range from 5.3 to 7.5. SEM-EDS analysis of the separated magnetic particles implied that Cd was successfully enriched on S-nZVI and the distribution of Cd was closely related to Fe, S, and O. CdO and CdS was confirmed as the key products for Cd immobilization in soil. Meanwhile, the S-nZVI was oxided to α-FeOOH, γ-FeOOH, and γ-Fe₂O₃. The existence of CdO was visibly related to the iron oxides, suggesting the synergetic immobilization effect by iron oxides. Overall, S-nZVI was promising for the remediation of Cd-contaminated soil.