Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Unravelling the mechanisms of organic micropollutant removal in bio-electrochemical systems: Insights into sorption, electrochemical degradation, and biodegradation processes

Bio-electrochemical systems (BESs) have recently been proposed as an efficient treatment technology to remove organic micropollutants from water treatment plants. In this study, we aimed to differentiate between sorption, electrochemical transport/degradation, and biodegradation. Using electro-active microorganisms and electrodes, we investigated organic micropollutant removal at environmentally relevant concentrations, clarifying the roles of sorption and electrochemical and biological degradation. The role of anodic biofilms on the removal of 10 relevant organic micropollutants was studied by performing separate sorption experiments on carbon-based electrodes (graphite felt, graphite rod, graphite granules, and granular activated carbon) and electrochemical degradation experiments at two different electrode potentials (-0.3 and 0 V). Granular activated carbon showed the highest sorption of micropollutants; applying a potential to graphite felt electrodes increased organic micropollutant removal. Removal efficiencies >80 % were obtained for all micropollutants at high anode potentials (+0.955 V), indicating that the studied compounds were more susceptible to oxidation than to reduction. All organic micropollutants showed removal when under bio-electrochemical conditions, ranging from low (e.g. metformin, 9.3 %) to exceptionally high removal efficiencies (e.g. sulfamethoxazole, 99.5 %). The lower removal observed under bio-electrochemical conditions when compared to only electrochemical conditions indicated that sorption to the electrode is key to guarantee high electrochemical degradation. The detection of transformation products of chloridazon and metformin indicated that (bio)-electrochemical degradation occurred. This study confirms that BES can treat some organic micropollutants through several mechanisms, which merits further investigation.

Recent advances in oxidative degradation of plastics

Oxidative degradation is a powerful method to degrade plastics into oligomers and small oxidized products. While thermal energy has been conventionally employed as an external stimulus, recent advances in photochemistry have enabled photocatalytic oxidative degradation of polymers under mild conditions. This tutorial review presents an overview of oxidative degradation, from its earliest examples to emerging strategies. This review briefly discusses the motivation and the development of thermal oxidative degradation of polymers with a focus on underlying mechanisms. Then, we will examine modern studies primarily relevant to catalytic thermal oxidative degradation and photocatalytic oxidative degradation. Lastly, we highlight some unique studies using unconventional approaches for oxidative polymer degradation, such as electrochemistry.

Insights into the response of electroactive biofilm with petroleum hydrocarbons degradation ability to quorum sensing signals

Bioelectrochemical technologies based on electroactive biofilms (EAB) are promising for petroleum hydrocarbons (PHs) remediation as anode can serve as inexhaustible electron acceptor. However, the toxicity of PHs might inhibit the formation and function of EABs. Quorum sensing (QS) is ideal for boosting the performance of EABs, but its potential effects on reshaping microbial composition of EABs in treating PHs are poorly understood. Herein, two AHL signals, C4-HSL and C12-HSL, were employed to promote EABs for PHs degradation. The start-times of AHL-mediated EABs decreased by 18-26%, and maximum current densities increased by 28-63%. Meanwhile, the removal of total PHs increased to over 90%. AHLs facilitate thicker and more compact biofilm as well as higher viability. AHLs enhanced the electroactivity and direct electron transfer capability. The total abundance of PH-degrading bacteria increased from 52.05% to 75.33% and 72.02%, and the proportion of electroactive bacteria increased from 26.14% to 62.72% and 63.30% for MFC-C4 and MFC-C12. Microbial networks became more complex, aggregated, and stable with addition of AHLs. Furthermore, AHL-stimulated EABs showed higher abundance of genes related to PHs degradation. This work advanced our understanding of AHL-mediated QS in maintaining the stable function of microbial communities in the biodegradation process of petroleum hydrocarbons.

Potential application of bioelectrochemical systems in cold environments

Globally, more than half of the world's regions and populations inhabit psychrophilic and seasonally cold environments. Lower temperatures can inhibit the metabolic activity of microorganisms, thereby restricting the application of traditional biological treatment technologies. Bioelectrochemical systems (BES), which combine electrochemistry and biocatalysis, can enhance the resistance of microorganisms to unfavorable environments through electrical stimulation, thus showing promising applications in low-temperature environments. In this review, we focus on the potential application of BES in such environments, given the relatively limited research in this area due to temperature limitations. We select microbial fuel cells (MFC), microbial electrolytic cells (MEC), and microbial electrosynthesis cells (MES) as the objects of analysis and compare their operational mechanisms and application fields. MFC mainly utilizes the redox potential of microorganisms during substance metabolism to generate electricity, while MEC and MES promote the degradation of refractory substances by augmenting the electrode potential with an applied voltage. Subsequently, we summarize and discuss the application of these three types of BES in low-temperature environments. MFC can be employed for environmental remediation as well as for biosensors to monitor environmental quality, while MEC and MES are primarily intended for hydrogen and methane production. Additionally, we explore the influencing factors for the application of BES in low-temperature environments, including operational parameters, electrodes and membranes, external voltage, oxygen intervention, and reaction devices. Finally, the technical, economic, and environmental feasibility analyses reveal that the application of BES in low-temperature environments has great potential for development.

Bio-electrochemical degradation of carbamazepine (CBZ): A comprehensive study on effectiveness, degradation pathway, and toxicological assessment

Recent attention on the detrimental effects of pharmaceutically active compounds (PhACs) in natural water has spurred researchers to develop advanced wastewater treatment methods. Carbamazepine (CBZ), a widely recognized anticonvulsant, has often been a primary focus in numerous studies due to its prevalence and resistance to breaking down. This study aims to explore the effectiveness of a bio-electrochemical system in breaking down CBZ in polluted water and to assess the potential harmful effects of the treated wastewater. The results revealed bio-electro degradation process demonstrated a collaborative effect, achieving the highest CBZ degradation compared to electrodegradation and biodegradation techniques. Notably, a maximum CBZ degradation efficiency of 92.01% was attained using the bio-electrochemical system under specific conditions: Initial CBZ concentration of 60 mg/L, pH level at 7, 0.5% (v/v) inoculum dose, and an applied potential of 10 mV. The degradation pathway established by identifying intermediate products via High-Performance Liquid Chromatography-Mass Spectrometry, revealed the complete breakdown of CBZ without any toxic intermediates or end products. This finding was further validated through in vitro and in vivo toxicity assays, confirming the absence of harmful remnants after the degradation process.

Impact of Condition Variations on Bioelectrochemical System Performance: An Experimental Investigation of Sulfamethoxazole Degradation

Bioelectrochemical systems (BESs) are an innovative technology for the efficient degradation of antibiotics. Shewanella oneidensis (S. oneidensis) MR-1 plays a pivotal role in degrading sulfamethoxazole (SMX) in BESs. Our study investigated the effect of BES conditions on SMX degradation, focusing on microbial activity. The results revealed that BESs operating with a 0.05 M electrolyte concentration and 2 mA/cm2 current density outperformed electrolysis cells (ECs). Additionally, higher electrolyte concentrations and elevated current density reduced SMX degradation efficiency. The presence of nutrients had minimal effect on the growth of S. oneidensis MR-1 in BESs; it indicates that S. oneidensis MR-1 can degrade SMX without nutrients in a short period of time. We also highlighted the significance of mass transfer between the cathode and anode. Limiting mass transfer at a 10 cm electrode distance enhanced S. oneidensis MR-1 activity and BES performance. In summary, this study reveals the complex interaction of factors affecting the efficiency of BES degradation of antibiotics and provides support for environmental pollution control.

Microbial remediation of petroleum-contaminated soil focused on the mechanism and microbial response: a review

The environmental pollution caused by petroleum hydrocarbons has received considerable attention in recent years. Microbial remediation has emerged as the preferred method for the degradation of petroleum hydrocarbons, which is experiencing rapid development driven by advancements in molecular biology. Herein, the capacity of different microorganisms used for crude oil bioremediation was reviewed. Moreover, factors influencing the effectiveness of microbial remediation were discussed. Microbial remediation methods, such as bioaugmentation, biostimulation, and bioventilation, are summarized in this review. Aerobic and anaerobic degradation mechanisms were reviewed to elucidate the metabolic pathways involved. The impacts of petroleum hydrocarbons on microorganisms and the environment were also revealed. A brief overview of synthetic biology and a unique perspective of technique combinations were presented to provide insight into research trends. The challenges and future outlook were also presented to stimulate contemplation of the mechanisms involved and the development of innovative techniques.

Advances in Biological Wastewater Treatment Processes: Focus on Low-Carbon Energy and Resource Recovery in Biorefinery Context

Advancements in biological wastewater treatment with sustainable and circularity approaches have a wide scope of application. Biological wastewater treatment is widely used to remove/recover organic pollutants and nutrients from a diverse wastewater spectrum. However, conventional biological processes face challenges, such as low efficiency, high energy consumption, and the generation of excess sludge. To overcome these limitations, integrated strategies that combine biological treatment with other physical, chemical, or biological methods have been developed and applied in recent years. This review emphasizes the recent advances in integrated strategies for biological wastewater treatment, focusing on their mechanisms, benefits, challenges, and prospects. The review also discusses the potential applications of integrated strategies for diverse wastewater treatment towards green energy and resource recovery, along with low-carbon fuel production. Biological treatment methods, viz., bioremediation, electro-coagulation, electro-flocculation, electro-Fenton, advanced oxidation, electro-oxidation, bioelectrochemical systems, and photo-remediation, are summarized with respect to non-genetically modified metabolic reactions. Different conducting materials (CMs) play a significant role in mass/charge transfer metabolic processes and aid in enhancing fermentation rates. Carbon, metal, and nano-based CMs hybridization in different processes provide favorable conditions to the fermentative biocatalyst and trigger their activity towards overcoming the limitations of the conventional process. The emerging field of nanotechnology provides novel additional opportunities to surmount the constraints of conventional process for enhanced waste remediation and resource valorization. Holistically, integrated strategies are promising alternatives for improving the efficiency and effectiveness of biological wastewater treatment while also contributing to the circular economy and environmental protection.

Enhanced metronidazole removal in seawater using a single-chamber bioelectrochemical system

The aim of this study was to investigate the removal of metronidazole (MNZ) from seawater using a bioelectrochemical system (BES). Single-chamber BES (i.e., S-BES) and dual-chamber BES (i.e., D-BES) were constructed with carbon brush as the anode and cathode. With the inoculum of sea mud and 2 g/L of glucose as the substrate in seawater, S-BES and D-BES were acclimated to test the MNZ removal. Results showed that S-BES could remove almost 100 % of 200 mg/L MNZ within 120 h and remain stable within 10 cycles of operation (∼50 d) under the applied voltage of 0.8 V. The MNZ removal reached ∼100 % and 60.2 % in the cathodic and anodic chambers of D-BES fed by 100 mg/L MNZ under 0.8 V, respectively. The MNZ concentration of 200 mg/L significantly inhibited the sulfur metabolism, decreased the ratio of live to dead cells in the electrode biofilms, and thus reduced the SO42- removal in the S-BES. The MNZ degradation and S2- oxidation was mainly attributed to the cathodic and anodic biofilms of S-BES, respectively. Three degradation pathways of MNZ were proposed based on the identified intermediates and results of density functional theory calculations. The synergies among different genus species in the bacterial communities of biofilms, and between anodic and cathodic reactions could be responsible for the high performance of S-BES. Results from this study should be not only useful for the MNZ removal but also for effective MNZ inhibition of sulfate-reducing bacteria induced microbiologically influenced corrosion in seawater.

Scaling up of dual-chamber microbial electrochemical systems - An appraisal using systems design approach

Impetus to minimise the energy and carbon footprints of evolving wastewater resource recovery facilities has promoted the development of microbial electrochemical systems (MES) as an emerging energy-neutral and sustainable platform technology. Using separators in dual-chamber MES to isolate anodic and cathodic environments creates endless opportunities for its myriad applications. Nevertheless, the high internal resistance and the complex interdependencies among various system factors have challenged its scale-up. This critical review employed a systems approach to examine the complex interdependencies and practical issues surrounding the implementation and scalability of dual-chamber MES, where the anodic and cathodic reactions are mutually appraised to improve the overall system efficiency. The robustness and stability of anodic biofilms in large-volume MES is dependent on its inoculum source, antecedent history and enrichment strategies. The composition and anode-respiring activity of these biofilms are modulated by the anolyte composition, while their performance demands a delicate balance between the electrode size, macrostructure and the availability of substrates, buffers and nutrients when using real wastewater as anolyte. Additionally, the catholyte governed the reduction environment and associated energy consumption of MES with scalable electrocatalysts needed to enhance the sluggish reaction kinetics for energy-efficient resource recovery. A comprehensive assessment of the dual-chamber reactor configuration revealed that the tubular, spiral-wound, or plug-in modular MES configurations are suitable for pilot-scale, where it could be designed more effectively using efficient electrode macrostructure, suitable membranes and bespoke strategies for continuous operation to maximise their performance. It is anticipated that the critical and analytical understanding gained through this review will support the continuous development and scaling-up of dual-chamber MES for prospective energy-neutral treatment of wastewater and simultaneous circular management of highly relevant environmental resources.

Microbial electricity-driven anaerobic phenol degradation in bioelectrochemical systems

Microbial electrochemical technologies have been extensively employed for phenol removal. Yet, previous research has yielded inconsistent results, leaving uncertainties regarding the feasibility of phenol degradation under strictly anaerobic conditions using anodes as sole terminal electron acceptors. In this study, we employed high-performance liquid chromatography and gas chromatography-mass spectrometry to investigate the anaerobic phenol degradation pathway. Our findings provide robust evidence for the purely anaerobic degradation of phenol, as we identified benzoic acid, 4-hydroxybenzoic acid, glutaric acid, and other metabolites of this pathway. Notably, no typical intermediates of the aerobic phenol degradation pathway were detected. One-chamber reactors (+0.4 V vs. SHE) exhibited a phenol removal rate of 3.5 ± 0.2 mg L-1 d-1, while two-chamber reactors showed 3.6 ± 0.1 and 2.6 ± 0.9 mg L-1 d-1 at anode potentials of +0.4 and + 0.2 V, respectively. Our results also suggest that the reactor configuration certainly influenced the microbial community, presumably leading to different ratios of phenol consumers and microorganisms feeding on degradation products.

Formation of oxidation byproducts during electrochemical treatment of simulated produced water

Electrochemical oxidation (EO) can effectively remove recalcitrant organic contaminants from produced water (PW) but the formation of toxic oxidation byproducts (OBPs) is an unintended consequence. This study has rigorously investigated the OBPs formation during the EO treatment of a simulated PW containing phenol - a common organic contaminant existing in PW, as a model contaminant. In the absence of ammonia, free chlorine was generated from Cl- oxidation to serve as the main oxidant for phenol oxidation. During the EO process, 2,4,6-trichlorophenol and 2,6-dichlorobenzoquinone were identified as the critical intermediates that led to the formation of carbonaceous OBPs (C-OBPs). Some C-OBPs like chloroform (TCM), chloral hydrate (CH), and trichloroacetic acid (TCAA) reached their peak concentrations of 15 - 180 μM that were then reduced to 1 - 115 μM via volatilization and/or electrochemical reduction. When ammonia was present, nitrogenous OBPs (N-OBPs) were formed with the peak levels of 1 - 10 μM at the chlorination breakpoint (when ammonia was completely removed) that were subsequently reduced below 1 uM via volatilization and/or hydrolysis. It was observed that ammonia significantly decreased the formation of both C-OBPs and chlorate due to the consumption of free chlorine. A higher current density accelerated OBPs formation rates with different effects on volatile and non-volatile OBPs. The results of this study will enhance our understanding of OBPs formation precursors and mechanisms during electrochemical process and help develop strategies for proper control of OBPs to achieve safer electrochemical wastewater treatment.

Carbon source priority and availability limit bidirectional electron transfer in freshwater mixed culture electrochemically active bacterial biofilms

This study investigated, if a mixed electroactive bacterial (EAB) culture cultivated heterotrophically at a positive applied potential could be adapted from oxidative to reductive or bidirectional extracellular electron transfer (EET). To this end, a periodic potential reversal regime between - 0.5 and 0.2 V vs. Ag/AgCl was applied. This yielded biofilm detachment and mediated electroautotrophic EET in combination with carbonate, i.e., dissolved CO2, as the sole carbon source, whereby the emerged mixed culture (S1) contained previously unknown EAB. Using acetate (S2) as well as a mixture of acetate and carbonate (S3) as the main carbon sources yielded primarily alternating electrogenic organoheterotropic metabolism with the higher maximum oxidation current densities recorded for mixed carbon media, exceeding on average 1 mA cm-2. More frequent periodic polarization reversal resulted in the increase of maximum oxidative current densities by about 50% for S2-BES and 80% for S3-BES, in comparison to half-batch polarization. The EAB mixed cultures developed accordingly, with S1 represented by mostly aerobes (84.8%) and being very different in composition to S2 and S3, dominated by anaerobes (96.9 and 96.5%, respectively). S2 and S3 biofilms remained attached to the electrodes. There was only minor evidence of fully reversible bidirectional EET. In conclusion the three triplicates fed with organic and/or inorganic carbon sources demonstrated two forms of diauxie: Firstly, S1-BES showed a preference for the electrode as the electron donor via mediated EET. Secondly, S2-BES and S3-BES showed a preference for acetate as electron donor and c-source, as long as this was available, switching to CO2 reduction, when acetate was depleted.

Enhanced 4-bromophenol anaerobic biodegradation in electricity-stimulated anaerobic system: The key role of humic acid in reshaping microbial eco-interrelations and functions

Electricity-stimulated anaerobic system (ESAS) has shown great potential for halogenated organic pollutants removal. Exogenous redox mediators can improve electron transfer efficiency to enhance pollutants removal in ESAS. In this study, humic acid (HA), a low-cost electron mediator, was added into ESAS to enhance the simultaneous reductive debromination and mineralization of 4-bromophenol (4-BP). Results showed that the highest 4-BP removal efficiency at 48 h was 95.43 % with HA dosage of 30 mg/L at - 700 mV, which was 34.67 % higher than that without HA. The addition of HA decreased the requirement for electron donors and enriched Petrimonas and Rhodococcus for humus respiratory. HA addition regulated microbial interactions, and enhanced species cooperation between Petrimonas and dehalogenation species (Thauera and Desulfovibrio), phenol degradation-related species (Rhodococcus) as well as fermentative species (Desulfobulbus). Functional genes related to 4-BP degradation (dhaA/hemE/xylC/chnB/dmpN) and electron transfer (etfB/nuoA/qor/ccoN/coxA) were increased in abundance by HA addition. The enhanced microbial functions, as well as species cooperation and facilitation, all contributed to the improved 4-BP biodegradation in HA-added ESAS. This study provided a deep insight into microbial mechanism driven by HA and offered a promising strategy for improving halogenated organic pollutants removal from wastewater.

Treatment of Aniline Wastewater by Membrane Distillation and Crystallization

Aniline is a highly toxic organic pollutant with "carcinogenic, teratogenic and mutagenesis" characteristics. In the present paper, a membrane distillation and crystallization (MDCr) process was proposed to achieve zero liquid discharge (ZLD) of aniline wastewater. Hydrophobic polyvinylidene fluoride (PVDF) membranes were used in the membrane distillation (MD) process. The effects of the feed solution temperature and flow rate on the MD performance were investigated. The results showed that the flux of the MD process was up to 20 L·m^-2·h^-1 and the salt rejection was above 99% under the feeding condition of 60 °C and 500 mL/min. The effect of Fenton oxidation pretreatment on the removal rate of aniline in aniline wastewater was also investigated, and the possibility of realizing the ZLD of aniline wastewater in the MDCr process was verified.

Role of bio-electrochemical technology for enzyme activity stimulation in high-consumption pharmaceuticals biodegradation

Active pharmaceutical ingredients (APIs) and their intermediate residues have recently been considered a serious concern. Among technologies, bio-electrochemical technologies (BETs) have stimulated the production of bio-electrical energy. This review aims to examine the benefit and mechanism of BETs on the degradation of high-consumption pharmaceutical compounds, including antibiotic, anti-inflammatory, and analgesic drugs, and the stimulation of enzymes induced in a bioreactor. Moreover, intermediates and the proposed pathways of pharmaceutical compound biodegradation in BETs are to be explained in this review. According to studies performed exclusively, the benefit of BETs is using bio-electroactive microbes to mineralize recalcitrant pharmaceutical contaminants by promoting enzyme activity and energy. Since BETs use the electron transfer chain between bio-anode/-cathode and pharmaceuticals, the enzyme activity is essential in the oxidation and reduction of phenolic rings of drugs and the ineffective detoxification of effluent from the treatment plant. This study is suggested a vital and influential role of BETs in mineralizing and enzyme induction in bioreactors. Eventually, a content of future developments or outlooks of BETs are propounded to improve the pharmaceutical industries' wastewater problems.

The efficient treatment of mature landfill leachate using tower bipolar electrode flocculation-oxidation combined with electrochemical biofilm reactors

Mature landfill leachate contains high concentrations of organic and inorganic compounds that inhibit the performance of conventional biological treatment. Nowadays, few single treatment techniques could fulfill the requirements of cleaning mature landfill leachate. In this study, a tower bipolar electrode flocculation-oxidation (BEF-O) reactor and an electrochemical biofilm reactor (EBR) combine device was constructed to effectively treat mature landfill leachate. And the removal efficiency and mechanism of various pollutants using the BEF-O reactor were investigated. The BEF-O system with the current density of 100 mA/cm² shows excellent treatment efficiency, which can roundly remove most pollutants (NH₄⁺-N, COD and heavy metals, etc.), and increase the bioavailability of the effluent to facilitate subsequent EBR treatment. Benefiting from the metabolic stimulation and population selection effect of electric current on microorganisms, EBR has a denser biofilm, stronger anti-pollution load capacity, superior, and stable pollution treatment efficiency. More importantly, the combined device can reduce the concentrations of COD and NH₄⁺-N from 6410 to 338 mg/L and 4065 to 4 mg/L, respectively, and has an economical energy consumption of 32.02 kWh/(kg COD) and 54.04 kWh/ (kg NH₄⁺-N). To summarize, this research could provide an innovative and industrial application prospect technology for the mature landfill leachate treatment.

The microbial synergy and response mechanisms of hydrolysis-acidification combined microbial electrolysis cell system with stainless-steel cathode for textile-dyeing wastewater treatment

Microbial electrolysis cell (MEC) has been existing problems such as poor applicability to real wastewater and lack of cost-effective electrode materials in the practical application of refractory wastewater. A hydrolysis-acidification combined MEC system (HAR-MECs) with four inexpensive stainless-steel and conventional carbon cloth cathodes for the treatment of real textile-dyeing wastewater, which was fully evaluated the technical feasibility in terms of parameter optimization, spectral analysis, succession and cooperative/competition effect of microbial. Results showed that the optimum performance was achieved with a 12 h hydraulic retention time (HRT) and an applied voltage of 0.7 V in the HAR-MEC system with a 100 μm aperture stainless-steel mesh cathode (SSM-100 μm), and the associated optimum BOD₅/COD improvement efficiency (74.75 ± 4.32 %) and current density (5.94 ± 0.03 A·m^-2) were increased by 30.36 % and 22.36 % compared to a conventional carbon cloth cathode. The optimal system had effective removal of refractory organics and produced small molecules by electrical stimulation. The HAR segment could greatly alleviate the imbalance between electron donors and electron acceptors in the real refractory wastewater and reduce the treatment difficulty of the MEC segment, while the MEC system improved wastewater biodegradability, amplified the positive and specific interactions between degraders, fermenters and electroactive bacteria due to the substrate complexity. The SSM-100 μm-based system constructed by phylogenetic molecular ecological network (pMEN) exhibited moderate complexity and significantly strong positive correlation between electroactive bacteria and fermenters. It is highly feasible to use HAR-MEC with inexpensive stainless-steel cathode for textile-dyeing wastewater treatment.

Refractory azo dye wastewater treatment by combined process of microbial electrolytic reactor and plant-microbial fuel cell

An innovative design of microbial electrolytic reactor (MER) coupled with Ipomoea aquaticaForsk. plant microbial fuel cell (IAF-PMFC) was developed for azo dye wastewater treatment and electricity generation. This study aims to assess the sequential degradation of azo dye and the feasibility of energy self-sufficiency in the MER/IAF-PMFC system. The decomposition of azo dye into aromatic amines and dye decolorization occurred in the MER at high hydraulic loading of 0.28 m³/(m²·d), while dye intermediates were mainly mineralized in the IAF-PMFC at low hydraulic loading of 0.06 m³/(m²·d). The final decolorization efficiency and COD removal of the combined system reached 99.64% and 92.06% respectively, even at influent dye concentration of 1000 mg/L. The effects of open/closed circuit conditions, presence/absence of aquatic plant and different cathode areas on the performance of the IAF-PMFC for treating the effluent of the MER were systematically tested, and the results showed that closed-circuit condition, plant involvement and larger cathode area were more beneficial to decolorization, detoxification and mineralization of dye wastewater, bioelectricity output, plant growth and photosynthetic rate. The power consumption by the MER was 0.0163 kWh/m³ of dye wastewater, while the highest power generation of the IAF-PMFC reached 0.0183 kWh/m³. The current efficiency of the MER for dye decolorization was as high as 942.83%, while the maximum coulombic efficiency of the IAF-PMFC for intermediates metabolism was only 6.30%, which still had much space of bioelectricity generation promotion. The MER/IAF-PMFC technology can simultaneously realize refractory wastewater treatment and balance of electricity production and consumption.

A feasibility investigation of a pilot-scale bioelectrochemical coupled anaerobic digestion system with centric electrode module for real membrane manufacturing wastewater treatment

The large-scale application of bioelectrochemical coupled anaerobic digestion (BES-AD) is limited by the matching of electrode configuration and the applicability of real wastewater. In this study, a pilot-scale BES-AD system with an effective system volume of 5 m³ and a 1 m³ volume of a carbon fiber brush electrode module was constructed and tested for treatment of the membrane manufacturing wastewater. The results showed that the BOD₅/COD of the wastewater was increased from 0.238 to 0.398 when the applied voltage was 0.9 V. The pollutants such as N, N-Dimethylacetamide and glycerol in wastewater were degraded significantly. The microorganisms in the electrode modules were spatially enriched. The fermenters (Norank_f__ML635J-40_aquatic_group, 6.55 %; unclassified_f__Propionibacteriaceae, 5.25 %) and degraders (Corynebacterium, 29.31 %) were mostly enriched at the bottom, while electroactive bacteria (Pseudomonas, 29.39 %, Geobacter, 7.86 %) were mostly enriched at the top. Combined with the economical construction and operation cost ($1708.8/m³ and $0.76/m³) of the BES-AD system.

Degradation of phenol in the bio-cathode of a microbial desalination cell with power generation and salt removal

In this study, the performance of a three-chamber microbial desalination cell (MDC) was assessed to simultaneously remove salt (35 g.L^-1) from water and degrade phenol as a hazardous compound. Two parallel MDCs with the same configurations were run using glucose as the chemical oxygen demand (COD) at an initial concentration of 1.5 g.L^-1 as the anolyte. MDC#1 operated with 10 mM phosphate buffer solution (PBS), while MDC#2 operated with bio-cathode as the catholyte for the degradation of 100 mg.L^-1 of phenol. The use of MDC#1 resulted in a power density, desalination efficiency, and COD removal of 366.2 mW.m^-2, 50.3 ± 4.0 %, and 79.3 ± 2.2 %, respectively. All performance parameters were improved in MDC#2 with bio-cathode so that power density, desalination efficiency, and COD removal reached 660.1 mW.m^-2, 72.1 ± 3.0 %, and 92.6 ± 2.4 %, respectively. Also, more than 96 % of phenol was degraded using bio-cathode within 7 h of operation. Bio-cathode could enhance the performance of the MDC reactor through catalyzing the final reactions of electron acceptors compared to MDC#1 with a chemical cathode. In general, the results indicated that heterotrophic microorganisms, able to grow alongside autotrophic bacteria, could effectively extend the applications of MDC reactors to degrade hazardous compounds in cathode chambers.

Synergistic effect of bioanode and biocathode on nitrobenzene removal: Microbial community structure and functions

This study aimed to reveal the synergistic effect of bioanode and biocathode on nitrobenzene (NB) removal with different microbial community structures and functions. Single-chamber bioelectrochemical reactors were constructed and operated with different initial concentrations of NB and glucose as the substrate. With the synergistic effect of biocathode and bioanode, NB was completely removed within 8 h at a kinetic rate constant of 0.8256 h^-1, and high conversion rate from NB to AN (92%) was achieved within 18 h. The kinetic rate constant of NB removal was linearly correlated with the maximum current density and total coulombs (R² > 0.95). Increase of glucose and NB concentrations had significantly positive and negative effects, respectively, on the NB removal kinetics (R² > 0.97 and R² > 0.93, respectively). Geobacter sp. and Enterococcus sp. dominated in the bioanode and biocathode, respectively. The presence of Klebsiella pneumoniae in the bioanode was beneficial for Geobacter species to produce electricity and to alleviate the NB inhibition. As one of the dominant species at the biocathode, Methanobacterium formicicum has the ability of nitroaromatics degradation according to KEGG analysis, which played a crucial role for NB reduction. Fermentative bacteria converted glucose into volatile fatty acids or H₂, to provide energy sources to other species (e.g., Geobacter sulfurreducens and Methanobacterium formicicum). The information from this study is useful to optimize the bioelectrocatalytic system for nitroaromatic compound removal.

Bio-electrical stimulation process on degradation of Phenanthrene from aqueous solution using a novel anode modified with carbon cloth: Operational performance, microbial activity and energy

Phenanthrene as the hazardous PAHs-component are extensively detected in industrial wastewater. However, the impacts of bioelectrostimulation process on Phenanthrene degradation in aerobic reactors remained unclear. Here, a novel bioelectrostimulation process equipped with carbon cloth as electrodes was developed to investigate the removal efficiency of Phenanthrene and ATPase enzyme activity in the synthetic wastewater. The results obtained from the present study indicated that a complete Phenanthrene degradation (100%) can be achieved using microbial electrostimulation systems steel mesh coated with carbon cloth (MES-CC) as anode under optimal operational conditions (electrical current: 4 mA, HA concentration: 15 mg L^-1) within 18 h. The conductive carbon cloth provides a biofilm carrier to easily transfer the electrons between electrodes and microbial communities. In addition, the highest ATPase enzyme activity (5176 U) was observed when the aerobic MES-CC reactors were operated with electrical current 4 mA. Furthermore, the COD removal efficiency in MES-CC increased from 49% to 96% when the C: N ratio decreased from 20 to 5. The highest value of V_max in MES-CC for suspended and attached growth were determined to be 2.87 and 0.54 g COD g^-1 biomass. Overall, the results demonstrated that MES equipped with carbon cloth and continuous electrical current mode has good potential for efficient Phenanthrene wastewater treatment.

Enhanced photodegradation of antibiotics based on anoxygenic photosynthetic bacteria and bacterial metabolites: A sustainably green strategy for the removal of high-risk organics from secondary effluent

Antibiotic residues in effluents discharged from wastewater treatment plants (WWTPs) have been considered high-risk organics due to biorefractory property and potential toxicity. Secondary pollution and unsustainability existed in advanced treatment of secondary effluent are currently in urgent need of improvement. In this study, a sustainably green strategy based on Rhodopseudomonas palustris (R.palustris) by regulating the structure of extracellular polymeric substances (EPS) was proposed for the first time to achieve efficiently removal of sulfadiazine (SDZ). Results showed that 0.2 V was the optimal external potential for R.palustris to efficiently remove SDZ, where the biodegradation rate constant obtained at this potential was 4.87-folds higher than that in open-circuit mode and a complete removal was achieved within 58 h in the presence of EPS extracted at this potential. Three-dimensional excitation-emission matrix (3D-EEM) spectra analysis suggested that tryptophan protein-like, tyrosine protein-like, humic acid-like and fulvic acid-like substances present in EPS were the main effective components which was responsible for the indirect photodegradation of SDZ. The quenching experiments showed that ³EPS* was the dominant reactive species which accounted for 90% of SDZ removal. This study provides new implications for the advanced treatment of secondary effluent organic matters by developing eco-friendly bioaugmentation technology and biomaterials.

A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects

Azo dyes are typical toxic and refractory organic pollutants widely used in the textile industry. Bio-electrochemical systems (BESs) have great potential for the treatment of azo dyes with the help of microorganisms as biocatalysts and have advanced significantly in recent years. However, the latest and significant advancement and achievements of BESs treating azo dyes have not been reviewed since 8 years ago. This review thus focuses on the recent investigations of BESs treating azo dyes from the year of 2013-2020 in order to broaden the knowledge and deepen the understanding in this field. In this review, azo dyes degradation mechanisms of BESs are first elaborated, followed by the introduction of BES configurations with the emphasis on the novelties. The azo dye degradation performance of BESs is then presented to demonstrate their effectiveness in azo dye removal. Effects of various operating parameters on the overall performance of BESs are comprehensively elucidated, including electrode materials, external resistances and applied potentials, initial concentrations of azo dyes, and co-substrates. Predominant microorganisms responsible for degradation of azo dyes in BESs are highlighted in details. Furthermore, the combination of BESs with other processes to further improve the azo dye removal are discussed. Finally, an outlook on the future research directions and challenges is provided from the viewpoint of realistic applications of the technology.

Iron single-atom anchored N-doped carbon as a 'laccase-like' nanozyme for the degradation and detection of phenolic pollutants and adrenaline

To solve the inherent defects of laccase, the first iron single-atom anchored N-doped carbon material (Fe₁@CN-20) as a laccase mimic was disclosed. The FeN₄ structure of this material can well mimic the catalytic activity of laccase. Although Fe₁@CN-20 has a lower metal content (2.9 wt%) than any previously reported laccase mimics, it exhibits kinetic constants comparable to those of laccase, as its K_m (Michaelis constant) and V_max (maximum rate) are 0.070 mM and 2.25 µM/min respectively, which are similar to those of laccase (0.078 mM, 2.49 µM/min). This catalyst displays excellent stability even under extreme pH (2-9), high temperature (100 °C), strong ionic strength (500 mM of NaCl), high ethanol concentration (volume ratio 40%) and long storage time (2 months). Additionally, it can be reused for at least 7 times with only a slight loss in activity. Therefore, this material has a much lower price and better stability and recyclability than laccase, which has been applied in the detection and degradation of a series of phenolic compounds. In the detection of adrenaline, Fe₁@CN-20 achieved a detection limit of 1.3 µM, indicating it is more sensitive than laccase (3.9 µM).

Rapid removal of chloramphenicol via the synergy of Geobacter and metal oxide nanoparticles

The wide use of chloramphenicol and its residues in the environments are an increasing threat to human beings. Electroactive microorganisms were proven with the ability of biodegradation of chloramphenicol, but the removal rate and efficiency need to be improved. In this study, a model electricigens, Geobacter metallireducens, was supplied with and Fe₃O₄ and MnO₂ nanoparticles. Five times higher chloramphenicol removal rate (0.71 d^-1) and two times higher chloramphenicol removal efficiency (100%) was achieved. Fe₃O₄ and MnO₂ nanoparticles highly increased the current density and NADH-quinone oxidoreductase expression. Fe₃O₄ nanoparticles enhanced the expression of alcohol dehydrogenase and c-type cytochrome, while MnO₂ nanoparticles increased the transcription of pyruvate dehydrogenase and Type IV pili assembly genes. Chloramphenicol was reduced to a type of dichlorination reducing product named CPD3 which is a benzene ring containing compound. Collectively, Fe₃O₄ and MnO₂ nanoparticles increased the chloramphenicol removal capacity in MFCs by enhancing electron transfer efficiency. This study provides new enhancing strategies for the bioremediation of chloramphenicol in the environments.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Green approach and strategies for wastewater treatment using bioelectrochemical systems: A critical review of fundamental concepts, applications, mechanism, and future trends

Millions of litters of multifarious wastewater are directly disposed into the environment annually to reduce the processing costs leading to eutrophication and destroying the clean water sources. The bioelectrochemical systems (BESs) have recently received significant attention from researchers due to their ability to convert waste into energy and their high efficiency of wastewater treatment. However, most of the performed researches of the BESs have focused on energy generation, which created a literature gap on the utilization of BESs for wastewater treatment. The review highlights this gap from various aspects, including the BESs trends, fundamentals, applications, and mechanisms. A different review approach has followed in the present work using a bibliometric review (BR) which defined the literature gap of BESs publications in the degradation process section and linked the systematic review (SR) with it to prove and review the finding systematically. The degradation mechanisms of the BESs have been illustrated comprehensively in the current work, and various suggestions have been provided for supporting future studies and cooperation.

"Self-degradation" of 2-chlorophenol in a sequential cathode-anode cascade mode bioelectrochemical system

A sequential cathode-anode cascade mode bioelectrochemical system (BES) was designed and developed to achieve the "self-degradation" of 2-chlorophenol (2-CP). With the cooperation of cathode and anode, the electrons supplied for the cathode 2-CP dechlorination come from its own dechlorinated product in the anode, phenol. Separate degradation experiments of cathode 2-CP and anode phenol were firstly conducted. The optimum concentration ratio of anode acetate to phenolic compound (3.66/1.56) and the phenolic compound degradation ability of BES were investigated. With the formation of the bioanode able to degrade phenol, the sequential cathode-anode cascade mode BES was further developed, where 2-CP could achieve sequential dechlorination and ring-cleavage degradation. When applied voltage was 0.6 V and cathode influent pH was 7, 1.56 mM 2-CP reached 80.15% cathode dechlorination efficiency and 58.91% total cathode-anode phenolic compounds degradation efficiency. The bioanodes played a decisive role in BES. Different operating conditions would affect the overall performance of BES by changing the electrochemical activity and microbial community structure of the bioanodes. This study demonstrated the feasibility of the sequential cathode-anode cascade mode BES to degrade 2-CP wastewater and provided perspectives for the cooperation of cathode and anode, aiming to explore more potential of BES in wastewater treatment field.

Chemical safety assessment of transformation products of landfill leachate formed during the Fenton process

Organic chemicals identified in raw landfill leachate (LL) and their transformation products (TPs), formed during Fenton treatment, were analyzed for chemical safety following REACH guidelines. The raw LL was located in the metropolitan region of Campina Grande, in northeast Brazil. We elucidated 197 unique chemical structures, including 154 compounds that were present in raw LL and 82 compounds that were detected in the treated LL, totaling 39 persistent compounds and 43 TPs. In silico models were developed to identify and prioritize the potential level of hazard/risk these compounds pose to the environment and society. The models revealed that the Fenton process improved the biodegradability of TPs. Still, a slight increase in ecotoxicological effects was observed among the compounds in treated LL compared with those present in raw LL. No differences were observed for aryl hydrocarbon receptor (AhR) and antioxidant response element (ARE) mutagenicity. Similar behavior among both raw and treated LL samples was observed for biodegradability; Tetrahymena pyriformis, Daphnia magna, Pimephales promelas and ARE, AhR, and Ames mutagenicity. Overall, our results suggest that raw and treated LL samples have similar activity profiles for all endpoints other than biodegradability.

Simultaneously autotrophic denitrification and organics degradation in low-strength coal gasification wastewater (LSCGW) treatment via microelectrolysis-triggered Fe(II)/Fe(III) cycle

The autotrophic iron-depended denitrification (AIDD), triggered by microelectrolysis, was established in the microelectrolysis-assistant up-flow anaerobic sludge blanket (MEA-UASB) with the purpose of low-strength coal gasification wastewater (LSCGW) treatment while control UASB operated in parallel. The results revealed that chemical oxygen demand (COD) removal efficiency and total nitrogen (TN) removal load at optimum current (2.5 A/m³) in MEA-UASB (83.2 ± 2.6% and 0.220 ± 0.010 kg N/m³·d) were 1.42-fold and 1.57-fold higher than those (58.5 ± 2.1% and 0.139 ± 0.011 kg N/m³·d) in UASB, verifying that AIDD and following dissimilatory iron reduction (DIR) process could offer the novel pathway to solve the electron donor-deficient and traditionally denitrification-infeasible problems. High-throughput 16S rRNA gene pyrosequencing shown that iron-oxidizing denitrifiers (Thiobacillus and Acidovorax species) and iron reducing bacteria (Geothrix and Ignavibacterium speices), acted as microbial iron cycle of contributors, were specially enriched at optimum operating condition. Additionally, the activities of microbial electron transfer chain, electron transporters (complex I, II, III and cytochrome c) and abundance of genes encoding important enzymes (narG, nirK/S, norB and nosZ) were remarkably promoted, suggesting that electron transport and consumption capacities were stimulated during denitrification process. This study could shed light on better understanding about microelectrolysis-triggered AIDD for treatment of refractory LSCGW and further widen its application potential in the future.

Bio-Electrochemical System Depollution Capabilities and Monitoring Applications: Models, Applicability, Advanced Bio-Based Concept for Predicting Pollutant Degradation and Microbial Growth Kinetics via Gene Regulation Modelling

Microbial fuel cells (MFC) are an emerging technology for waste, wastewater and polluted soil treatment. In this manuscript, pollutants that can be treated using MFC systems producing energy are presented. Furthermore, the applicability of MFC in environmental monitoring is described. Common microbial species used, release of genome sequences, and gene regulation mechanisms, are discussed. However, although scaling-up is the key to improving MFC systems, it is still a difficult challenge. Mathematical models for MFCs are used for their design, control and optimization. Such models representing the system are presented here. In such comprehensive models, microbial growth kinetic approaches are essential to designing and predicting a biosystem. The empirical and unstructured Monod and Monod-type models, which are traditionally used, are also described here. Understanding and modelling of the gene regulatory network could be a solution for enhancing knowledge and designing more efficient MFC processes, useful for scaling it up. An advanced bio-based modelling concept connecting gene regulation modelling of specific metabolic pathways to microbial growth kinetic models is presented here; it enables a more accurate prediction and estimation of substrate biodegradation, microbial growth kinetics, and necessary gene and enzyme expression. The gene and enzyme expression prediction can also be used in synthetic and systems biology for process optimization. Moreover, various MFC applications as a bioreactor and bioremediator, and in soil pollutant removal and monitoring, are explored.

Augmentation of chloramphenicol degradation by Geobacter-based biocatalysis and electric field

Electroactive microorganisms and electrochemical technologies have been separately used for environmental remediation such as antibiotics removal, yet the efficiency of coupling these two methods for chlorinated antibiotics removal is poorly known. Here we tested the synergy of Geobacter sulfurreducens PCA, an electroactive bacteria, and an electrical field, on chloramphenicol removal. Removal is increased two-fold by increasing the temperature from 30°C to 37°C. The cyclic voltammograms and chronoamperometry tests demonstrated that G. sulfurreducens PCA catalyzed chloramphenicol chemical reduction with electrode as excusive electron donor. A critical voltage, -0.6 to -0.5 V vs. Ag/AgCl, was discovered for chloramphenicol degradation with an increase of removal rate about 2.62-folds, from 31.06% to 81.41%. Combined removal with both G. sulfurreducens PCA and an electrical field increased the apparent rate constant and reached 82.77% removal at -0.5 V. Specially, the combined removal at -0.5 V even presented more robust removal efficiency compared to -0.6 V (78.64%) without G. sulfurreducens PCA. Mass spectrometry of degradation products indicates the reduction of nitro into amine groups, and dechlorination into less toxic compounds. Overall, combined biocatalysis and an electrical field is a promising method to remove antibiotics from polluted environments.

Graphene family for hydrogen peroxide production in electrochemical system

The development of carbon-based materials to catalyze two-electron (2e^-) pathway of oxygen reduction reaction (ORR) offers great potential for hydrogen peroxide (H₂O₂) production. As a class of novel two-dimensional (2D) carbon materials, graphene and its derivatives have raised increasing attention as excellent noble-metal-free catalysts in 2e ORR due to their unique structure, physical and chemical properties. This review focuses on the synthesis of main graphene family members and graphene based electrodes, as well as their applications for H₂O₂ generation in electrochemical systems. We describe the functions of the graphene family in electrochemical systems, such as accelerating electron transfer and increasing oxygen transfer for cathodes in electrochemical systems, aiming to reveal the enhancement mechanisms of graphene and its derivatives on H₂O₂ production. Furthermore, the challenges and prospects for graphene family used as catalyst for H₂O₂ production in the future are also proposed.

Advancement in Benthic Microbial Fuel Cells toward Sustainable Bioremediation and Renewable Energy Production

Anthropogenic activities are largely responsible for the vast amounts of pollutants such as polycyclic aromatic hydrocarbons, cyanides, phenols, metal derivatives, sulphides, and other chemicals in wastewater. The excess benzene, toluene and xylene (BTX) can cause severe toxicity to living organisms in wastewater. A novel approach to mitigate this problem is the benthic microbial fuel cell (BMFC) setup to produce renewable energy and bio-remediate wastewater aromatic hydrocarbons. Several mechanisms of electrogens have been utilized for the bioremediation of BTX through BMFCs. In the future, BMFCs may be significant for chemical and petrochemical industry wastewater treatment. The distinct factors are considered to evaluate the performance of BMFCs, such as pollutant removal efficiency, power density, and current density, which are discussed by using operating parameters such as, pH, temperature and internal resistance. To further upgrade the BMFC technology, this review summarizes prototype electrode materials, the bioremediation of BTX, and their applications.

Challenges and opportunities for the biodegradation of chlorophenols: Aerobic, anaerobic and bioelectrochemical processes

Chlorophenols (CPs) are highly toxic and refractory contaminants which widely exist in various environments and cause serious harm to human and environment health and safety. This review provides comprehensive information on typical CPs biodegradation technologies, the most green and benign ones for CPs removal. The known aerobic and anaerobic degradative bacteria, functional enzymes, and metabolic pathways of CPs as well as several improving methods and critical parameters affecting the overall degradation efficiency are systematically summarized and clarified. The challenges for CPs mineralization are also discussed, mainly including the dechlorination of polychlorophenols (poly-CPs) under aerobic condition and the ring-cleavage of monochlorophenols (MCPs) under anaerobic condition. The coupling of functional materials and degraders as well as the operation of sequential anaerobic-aerobic bioreactors and bioelectrochemical system (BES) are promising strategies to overcome some current limitations. Future perspective and research gaps in this field are also proposed, including the further understanding of microbial information and the specific role of materials in CPs biodegradation, the potential application of innovative biotechnologies and new operating modes to optimize and maximize the function of the system, and the scale-up of bioreactors towards the efficient biodegradation of CPs.

Impact of electrical stimulation modes on the degradation of refractory phenolics and the analysis of microbial communities in an anaerobic-aerobic-coupled upflow bioelectrochemical reactor

An electrically stimulated anaerobic-aerobic coupled system was developed to improve the biodegradation of refractory phenolics. Expected 4-nitrophenol, 2, 4-dinitrophenol, and COD removals in the system with aerobic cathodic and anaerobic anodic chambers were approximately 53.7%, 45.4%, 22.3% (intermittent mode) and 37.9%, 19.8%, 17.3% (continuous mode) higher than that in the control system (26.0 ± 6.4%, 30.7 ± 7.1%, 49.8 ± 3.0%). 2, 4-dichlorophenol removal in the system with aerobic anodic and anaerobic cathodic chambers was approximately 28.5% higher than that in the control system (71.4 ± 5.7%). The contribution of the aerobic cathodic/anodic chambers to the removal of phenolic compounds was higher than that of the anaerobic cathodic/anodic chambers. The species related to phenolic biodegradation (Rhodococcus, Achromobacter, PSB-M-3, and Sphingobium) were enriched in the cathodic and anodic chambers of the system. These results showed that intermittent electrical stimulation could be a potential alternative for the efficient degradation of refractory phenolics.