Probing the aging processes and mechanisms of microplastic under simulated multiple actions generated by discharge plasma

Adsorption and desorption of parachlormetaxylenol by aged microplastics and molecular mechanism

The addition of active ingredients such as antibacterial agent and non-active ingredients such as plastic microspheres (MPs) in personal care products (PCPs) are the common pollutants in the aquatic environment, and their coexistence poses potential threat to the aquatic ecosystem. As a substitute for the traditional antibacterial ingredients triclosan and triclocarban, the usage of parachlormetaxylenol (PCMX) is on the rise and is widely used in PCPs. In this study, the adsorption and desorption behaviors of PCMX were investigated with two typical MPs, polyvinyl chloride (PVC) and polyethylene (PE), and the effects of different aging modes and molecular mechanisms were explored through batch experiments and density functional theory calculation. Both laboratory aging and field aging resulted in surface wrinkles of MPs, along with an increased proportion of oxygen-containing functional groups (CO, -OH). At the same aging time, the degree of laboratory aging was stronger than that of field aging, and the aging degree of PVC was greater that of PE. The aging process enhanced the adsorption capacity of MPs for PCMX. The equilibrium adsorption capacity of PVC increased from 3.713 mg/g (virgin) to 3.823 mg/g (field aging) and 3.969 mg/g (laboratory aging), while that of PE increased from 3.509 mg/g to 3.879 mg/g and 4.109 mg/g, respectively. Meanwhile, aging also resulted in an increase in the desorption capacity of PCMX from PVC and PE. Oxygen-containing functional groups in aged MPs could serve as adsorption sites for PCMX and improved the electrostatic adsorption capacity. Oxygen-containing groups generated on the surface of aged MPs formed hydrogen bonding with the phenolic hydroxyl groups of PCMX, which became the main driving force for adsorption. Our results reveal the potential impact and mechanism of aging on the adsorption of PCMX by MPs, which provides new insights for the interaction mechanism between environmental MPs and associated contaminants.

Transport of microplastics treated with dielectric barrier discharge (DBD) plasma in saturated porous media

The performance of discharge plasma in treating organic pollutants and micro-organisms in water is impressive. When discharge plasma is used to treat polluted water containing organic pollutants and microorganisms, the presence of a certain amount of microplastics (MPs) in the water is unavoidable due to the complexity of the components contained in the water and the prevalence of MPs. MPs, as one of the pollutants that are difficult to be degraded by discharge plasma, undergo physical and chemical changes that increase their risk in the environment after treatment. Therefore, it is necessary to understand the fate of MPs after being treated with discharge plasma. In this study, the surface morphology of plastics before and after discharge plasma treatment was observed by scanning electron microscopy (SEM). The plastics after discharge plasma treatment were characterized by Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) to determine the changes in oxygen-containing functional groups on the surface. The recovery of microplastics (MPs) in saturated porous media under different physicochemical and plasma oxidation conditions was investigated by column experiments. It has been shown that MPs exhibit increased recovery under conditions of increased flow rate and pH. A decrease in recovery was observed at elevated ionic strength and co-existing cation valence. High voltages and low air flow rates increase the oxidation of MPs by increasing the thermal effects of the dielectric barrier discharge (DBD) plasma system, the amount of reactive oxygen species (ROS) and the intensity of ultraviolet ray (UV) irradiation. The mobility of MPs is enhanced by a combination of these factors. The advection-dispersion equation (ADE) fits the transport data of MPs well. The interaction energy between quartz sand and MPs was calculated using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. This study provides a new perspective on the potential risks of discharge plasma in water treatment.

Aged rather than pristine polyvinyl chloride microplastic affect the development and structure of Vallisneria natans population

A large number of microplastics have been discharged into freshwater ecosystems, where they age and are deposited in the sediment, posing a risk to primary producers, such as submerged macrophytes. Many macrophytes benefit from clonal integration, which lets the population work as a 'macro' organism. Nonetheless, little is known about the differences in phytotoxicity between aged and pristine microplastics, particularly for clonal populations of macrophytes. In this study, we showed that UV-aging changes the characteristics of polyvinyl chloride microplastics (PVC-MPs). Aged PVC-MPs possessed higher hydrophilicity, less chlorine and crystallinity, and more severe toxicity. The pristine PVC-MPs did not affect Vallisneria natans, while the aged PVC-MPs significantly affected the development and structure of the clonal population. The severely aged PVC-MPs reduced the relative growth rate of V. natans by 26 % at the population level. Furthermore, the mother plant (ortet) and offspring (ramet) responded differently to the aged PVC-MPs. A trade-off was observed between the growth rate and stress resistance in the ortets. The ortets increased investment in the root part to tolerate stress when facing exposure to microplastics. In contrast, the ramets were less resistant, as shown by shorter roots, and lower leaf chlorophyll, carbon, and nitrogen concentrations. Notably, the growth of the ramets was maintained and the investments in stolon structure by the ortets were not lessened. The ortet sacrificed itself for the continuation of the ramet. This clonal integration may safeguard V. natans survival and compensate for vegetative expansion. This study sheds new light on how macrophytes respond to microplastics at the clonal population level and provides direct evidence that existing studies may have underestimated the toxic effect of microplastics in freshwater ecosystems.

Global distribution, drivers, and potential hazards of microplastics in groundwater: A review

Since microplastics (MPs) were first detected in groundwater, an increasing number of studies have focused on groundwater pollution by MPs. However, knowledge of the global properties of groundwater MPs: distribution, concentration, composition, and morphology remains limited, while potential factors regulating their transport and distribution in groundwater, especially the hydrogeological background and climate warming conditions, have been omitted from most analyses. Furthermore, previous field investigations did not assess the risks posed by groundwater MPs to the environment and to human health, a necessary preliminary to remediation. In this work, to promote future MP pollution studies and remediation policies, we assimilated and synthesized the current knowledge on this topic. We reviewed current data on global groundwater pollution by MPs, analyzed the driving factors of their transport and distribution, and summarized the ecological and health hazards posed by MPs, before discussing current knowledge limits and suggesting perspectives for future work.

Adsorption mechanism of hexavalent chromium on electron beam-irradiated aged microplastics: Novel aging processes and environmental factors

Microplastics are widely present in the natural environment and exhibit a strong affinity for heavy metals in water, resulting in the formation of microplastics composite heavy metal pollutants. This study investigated the adsorption of heavy metals by electron beam-aged microplastics. For the first time, electron beam irradiation was employed to degrade polypropylene, demonstrating its ability to rapidly age microplastics and generate a substantial number of oxygen-containing functional groups on aged microplastics surface. Adsorption experiments revealed that the maximum adsorption equilibrium capacity of hexavalent chromium by aged microplastics reached 9.3 mg g-1. The adsorption process followed second-order kinetic model and Freundlich model, indicating that the main processes of heavy metal adsorption by aged microplastics are chemical adsorption and multilayer adsorption. The adsorption of heavy metals on aged microplastics primarily relies on the electrostatic and chelation effects of oxygen-containing functional groups. The study results demonstrate that environmental factors, such as pH, salinity, coexisting metal ions, humic acid, and water matrix, exert inhibitory effects on the adsorption of heavy metals by microplastics. Theoretical calculations confirm that the aging process of microplastics primarily relies on hydroxyl radicals breaking carbon chains and forming oxygen-containing functional groups on the surface. The results indicate that electron beam irradiation can simultaneously oxidize and degrade microplastics while reducing hexavalent chromium levels by approximately 90%, proposing a novel method for treating microplastics composite pollutants. Gas chromatography-mass spectrometry analysis reveals that electron beam irradiation can oxidatively degrade microplastics into esters, alcohols, and other small molecules. This study proposes an innovative and efficient approach to treat both microplastics composite heavy metal pollutants while elucidating the impact of environmental factors on the adsorption of heavy metals by electron beam-aged microplastics. The aim is to provide a theoretical basis and guidance for controlling microplastics composite pollution.

Molecular Weights of Dissolved Organic Matter Significantly Affect Photoaging of Microplastics

The fate of ubiquitous microplastics (MPs) is largely influenced by dissolved organic matter (DOM) in aquatic environments, which has garnered significant attention. The reactivity of DOM is reported to be greatly regulated by molecular weights (MWs), yet little is known about the effects of different MW DOM on MP aging. Here, the aging behavior of polystyrene MPs (PSMPs) in the presence of different MW fulvic acids (FAs) and humic acids (HAs) was systematically investigated. Under ultraviolet (UV) illumination, O/C of PSMPs aged for 96 h surged from 0.008 to 0.146 in the lower MW FA (FA<1kDa) treatment, suggesting significant PSMP aging. However, FA exhibited a stronger effect on facilitating PSMP photoaging than HA, which can be attributed to the fact that FA<1kDa contains more quinone and phenolic moieties, demonstrating a higher redox capacity. Meanwhile, compared to other fractions, FA<1kDa was more actively involved in the increase of different reactive species yields by 50-290%, including •OH, which plays a key role in PSMP photoaging, and contributed to a 25% increase in electron-donating capacity (EDC). This study lays a theoretical foundation for a better understanding of the environmental fate of MPs.

Photochemically induced aging of polystyrene nanoplastics and its impact on norfloxacin adsorption behavior

The co-occurrence of nanoplastics (NPs) and antibiotics in the environment is a growing concern for ecological safety. As NPs age in natural environments, their surface properties and morphology may change, potentially affecting their interactions with co-contaminants such as antibiotics. It is crucial to understand the effect of aging on NPs adsorption of antibiotics, but detailed studies on this topic are still scarce. The study utilized the photo-Fenton-like reaction to hasten the aging of polystyrene nanoplastics (PS-NPs). The impact of aging on the adsorption behavior of norfloxacin (NOR) was then systematically examined. The results showed a time-dependent rise in surface oxygen content and functional groups in aged PS-NPs. These modifications led to noticeable physical changes, including increased surface roughness, decreased particle size, and improved specific surface area. The physicochemical changes significantly increased the adsorption capacity of aged PS-NPs for norfloxacin. Aged PS-NPs showed 5.03 times higher adsorption compared to virgin PS-NPs. The adsorption mechanism analysis revealed that in addition to the electrostatic interactions, van der Waals force, hydrogen bonding, π-π* interactions and hydrophobic interactions observed with virgin PS-NPs, aged PS-NPs played a significant role in polar interactions and pore-filling mechanisms. The study highlights the potential for aging to worsen antibiotic risk in contaminated environments. This study not only enhances the comprehension of the environmental behavior of aged NPs but also provides a valuable basis for developing risk management strategies for contaminated areas.

Investigation of the photolysis process of benzo(a)anthracene (BaA) on polyvinyl chloride (PVC) and polystyrene (PS) microplastics: Plastics aging effect, transformation products and toxicity assessment

Microplastics (MPs) and persistent pollutants (POPs) are new pollutants that are extensively studied worldwide. To fill the gaps that the degradation processes and mechanisms of polycyclic aromatic hydrocarbons (PAHs) on the surface of most MPs are still unclear, the photochemical transformation of benzo(a)anthracene (BaA) on polyvinyl chloride (PVC) MPs and polystyrene (PS) MPs in water were investigated and compared. The photolysis of BaA on the surface of PS in water proceeded easier than that on PVC within the 48 h irradiation period, with the pseudo-first-order rate constant of 0.0489 min-1 and 0.0181 min-1, respectively, which can be ascribed to the smaller particle size and more OH production of PS MPs. Due to the light competition between the chromophore and BaA as well as the light-shielding effect, aged MPs showed an inhibitory effect on the degradation of BaA compared with pristine MPs. For BaA/PVC MPs system, the degradation of BaA in real water was not significantly affected by coexisting ions and humic acid (HA) (p < 0.05), while slight inhibitory effect on the degradation of BaA appeared for PS MPs in different water matrices (UP: 86.97 %, YR: 84.47 %, PR: 81.42 % and HR: 83.21 %). According to the electron paramagnetic resonance (EPR) test, quenching experiment and probe experiment, the relative contribution of direct photolysis (PVC: 82.02 %; PS: 69.54 %) and indirect photolysis (PVC: 17.98 %; PS: 30.46 %) was confirmed. A total of 14 products were identified, and the product types were not affected by plastics aging. The results of the toxicity assessment indicated that although some intermediate products remained toxic to aquatic organisms, the toxicity of most products was lower than that of BaA. This study provides new insights into the environmental fate of PAHs and the role of MPs in the photolysis process of contaminants in surface water.

Insights into the effect of crystallinity on the sorption of organic pollutants to microplastics

The environmental behavior of microplastics (MPs) has attracted global attention. Research has confirmed that MPs can strongly absorb almost every kind of pollutant and can serve as vectors for pollutant transport. In this research, the sorption isotherms of six organic pollutants with different structure on four virgin plastic particles with different crystallinity were determined. Results indicated that the hydrophobicity (KOW) of organic pollutants and the crystallinity of MPs were the two key factors that affected the sorption process of organic pollutants on MPs. Strong correlations were observed between KOW and the partition coefficient. Hydrophobic partition was one of the major mechanisms regardless of the type of organic chemical (hydrophobic, polar, or dissociable). What is more, the influence of the crystallinity of MPs on the sorption process increased with increasing hydrophobicity of the chemical. Combining this result with analyzing the related literature on the effect of crystallinity, it was concluded that the effect of crystallinity on the sorption of chemicals with strong hydrophobicity was obvious, whereas this effect was negligible for chemicals with weak hydrophobicity. The influence of the crystallinity of MPs on sorption could even exceed the influence of MPs type, so crystallinity should be considered carefully when discussing the sorption capacity of MPs. This study enhances the understanding of the sorption of organic pollutants by MPs.

Association of tetrabromobisphenol A (TBBPA) with micro/nano-plastics: A review of recent findings on ecotoxicological and health impacts

Despite the diverse research into the environmental impact of plastics, several stones have yet to be unraveled in terms of their ecotoxicological potential. Moreover, their detrimental impacts have become terrifying in recent years as the understanding of their tendency to associate and form cohorts with other emerging contaminants grew. Despite the hypothesis that microplastics may potentially adsorb organic pollutants, sequestering and making them not bioavailable for enhanced toxicity, evidence with pollutants such as Tetrabromobisphenol A (TBBPA) defers this assertion. TBBPA, one of the most widely used brominated flame retardants, has been enlisted as an emerging contaminant of serious environmental and human health concerns. Being also an additive to plasticware, it is not far to suspect that TBBPA could be found in association with micro/nanoplastics in our environment. Several pieces of evidence from recent studies have confirmed the micro/nanoplastics-TBBPA association and have exposed their compounded detrimental impacts on the environment and human health. This study, therefore, presents a comprehensive and up-to-date review of recent findings regarding their occurrence, factors that foster their association, including their sorption kinetics and isotherms, and their impacts on aquatic/agroecosystem and human health. The way forward and prospects for future studies were presented. This research is believed to be of significant interest to the readership due to its relevance to current environmental challenges posed by plastics and TBBPA. The study not only contributes valuable insights into the specific interaction between micro/nanoplastics and TBBPA but also suggests the way forward and prospects for future studies in this field.

Bisphenol A sorption on commercial polyvinyl chloride microplastics: Effects of UV-aging, biofilm colonization and additives on plastic behaviour in the environment

Chemical additives are important components in commercial microplastics and their leaching behaviour has been widely studied. However, little is known about the potential effect of additives on the adsorption/desorption behaviour of pollutants on microplastics and their subsequent role as vectors for pollutant transport in the environment. In this study, two types of commercial polyvinyl chloride (PVC1 and PVC2) microplastics were aged by UV irradiation and biotic modification via biofilm colonization to investigate the adsorption and desorption behaviour of bisphenol A (BPA). Surface cracks and new functional groups (e.g., O-H) were found on PVC1 after UV irradiation, which increased available adsorption sites and enhanced H‒bonding interaction, resulting in an adsorption capacity increase from 1.28 μg/L to 1.85 μg/L. However, the adsorption and desorption capacity not showed significant changes for PVC2, which might be related to the few characteristic changes after UV aging with the protection of light stabilizers and antioxidants. The adsorption capacity ranged from 1.28 μg/L to 2.06 μg/L for PVC1 and PVC2 microplastics, and increased to 1.62 μg/L-2.95 μg/L after colonization by biofilms. The increased adsorption ability might be related to the N-H functional group, amide groups generated by microorganisms enhancing the affinity for BPA. The opposite effect was observed for desorption. Plasticizers can be metabolized during biofilm formation processes and might play an important role in microorganism colonization. In addition, antioxidants and UV stabilizers might also indirectly influence the colonization of microorganisms' on microplastics by controlling the degree to which PVC microplastics age under UV. The amount of biomass loading on the microplastics would further alter the adsorption/desorption behaviour of contaminants. This study provides important new insights into the evaluation of the fate of plastic particles in natural environments.

Modifying luteolin's algicidal effect on Microcystis by virgin and diversely-aged polystyrene microplastics: Unveiling novel mechanisms through microalgal adaptive strategies

Luteolin has shown great potential in inhibiting Microcystis-dominated cyanobacterial blooms. However, widespread microplastics (MPs) in natural aquatic systems often serve as substrates for cyanobacterial growth, which could impact cyanobacterial resistance to external stresses and interfere with luteolin's algicidal effect. This study explored the influence of virgin and diversely-aged polystyrene microplastics (PS-MPs) on inhibitory effect of luteolin on Microcystis growth and its microcystins (MCs) production/release. Moreover, the underlying mechanisms were also revealed by jointly analyzing SEM image, antioxidant response, exopolymeric substances (EPSs) production, and functional gene expression. Results suggested that 0.5, 5, and 50 mg/L virgin and diversely-aged PS-MPs almost weakened growth inhibition and oxidative damage of two doses of luteolin against Microcystisby stimulating its EPSs production and inducing self-aggregation of Microcystis cells and/or hetero-aggregation between Microcystis cells and PS-MPs. Compared to virgin PS-MPs, photo-aged PS-MPs possessed rougher flaky surfaces, and hydrothermal-aged PS-MPs showed internal cracking. These characteristics led to greater stimulation of EPS production and exhibited more significant protective effects on Microcystis. Notably, PS-MPs also decreased MCs content in aqueous phase, likely because they adsorbed some MCs. Such toxigenic hetero-aggregates formed by MCs, MPs, and Microcystis cells would directly poison grazing organisms that consume them and create more pathways for MCs into food web, posing greater eco-risks. This is the first study to clarify the influence and mechanisms of virgin and diversely-aged MPs on allelopathic algicidal effects from the perspective of microalgal inherent adaptive strategies.

Characteristics and adsorption behavior of typical microplastics in long-term accelerated weathering simulation

Microplastics can function as carriers in the environment, absorbing various toxins and spreading to diverse ecosystems. Toxins accumulated in microplastics have the potential to be re-released, posing a threat. In this study, two typical plastics, namely polyethylene (PE) and polystyrene (PS), along with the degradable plastic poly(butylene adipate-co-terephthalate) (PBAT), were subjected to a long-term ultraviolet alternating weathering experiment. The study investigated the variations in the weathering process and pollutant adsorption of microplastics of different particle sizes. Furthermore, the adsorption capacity of microplastics for various pollutants was assessed. The findings indicate that particle size significantly influences weathering, leading to variations in adsorption capacity. The weathered PE displays a higher adsorption capacity for azo dyes. Additionally, the adsorption capacity of PBAT for neutral red is double that of antibiotics. Importantly, the maximum adsorption capacity of PBAT for pollutants after aging is approximately 10 times greater than that of PE. Consequently, degradable plastics undergoing weathering in the natural environment may pose a higher ecological risk than traditional plastics.

Oxidative stress, biofilm-formation and activity responses of P. aeruginosa to microplastic-treated sediments: Effect of temperature and sediment type

Climate change and plastic pollution are the big environmental problems that the environment and humanity have faced in the past and will face in many decades to come. Sediments are affected by many pollutants and conditions, and the behaviors of microorganisms in environment may be influenced due to changes in sediments. Therefore, the current study aimed to explore the differential effects of various microplastics and temperature on different sediments through the metabolic and oxidative responses of gram-negative Pseudomonas aeruginosa. The sediments collected from various fields including beaches, deep-sea discharge, and marine industrial areas. Each sediment was extracted and then treated with various microplastics under different temperature (-18, +4, +20 and 35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed sediment samples were incubated with Pseudomonas aeruginosa to test bacterial activity, biofilm, and oxidative characteristics. The results showed that both the activity and the biofilm formation of Pseudomonas aeruginosa increased with the temperature of microplastic treatment in the experimental setups at the rates between an average of 2-39 % and 5-27 %, respectively. The highest levels of bacterial activity and biofilm formation were mainly observed in the beach area (average rate +25 %) and marine industrial (average rate +19 %) sediments with microplastic contamination, respectively. Moreover, oxidative characteristics significantly linked the bacterial activities and biofilm formation. The oxidative indicators of Pseudomonas aeruginosa showed that catalase and glutathione reductase were more influenced by microplastic contamination of various sediments than superoxide dismutase activities. For instance, catalase and glutathione reductase activities were changed between -37 and +169 % and +137 to +144 %, respectively; however, the superoxide dismutase increased at a rate between +1 and + 21 %. This study confirmed that global warming as a consequence of climate change might influence the effect of microplastic on sediments regarding bacterial biochemical responses and oxidation characteristics.

Biomass-derived cellulose nanocrystals modified nZVI for enhanced tetrabromobisphenol A (TBBPA) removal

Nano zero-valent iron (nZVI) is an advanced environmental functional material for the degradation of tetrabromobisphenol A (TBBPA). However, high surface energy, self-agglomeration and low electron selectivity limit degradation rate and complete debromination of bare nZVI. Herein, we presented biomass-derived cellulose nanocrystals (CNC) modified nZVI (CNC/nZVI) for enhanced TBBPA removal. The effects of raw material (straw, filter paper and cotton), process (time, type and concentration of acid hydrolysis) and synthesis methods (in-situ and ex-situ) on fabrication of CNC/nZVI were systematically evaluated based on TBBPA removal performance. The optimized CNC-S/nZVI(in) was prepared via in-situ liquid-phase reduction using straw as raw material of CNC and processing through 44 % H2SO4 for 165 min. Characterizations illustrated nZVI was anchored to the active sites at CNC interface through electrostatic interactions, hydrogen bonds and FeO coordinations. The batch experiments showed 0.5 g/L CNC-S/nZVI(in) achieved 96.5 % removal efficiency at pH = 7 for 10 mg/L initial TBBPA. The enhanced TBBPA dehalogenation by CNC-S/nZVI(in), involving in initial adsorption, reduction process and partial detachment of debrominated products, were possibly attributed to elevated pre-adsorption capacity and high-efficiency delivery of electrons synergistically. This study indicated that fine-tuned fabrication of CNC/nZVI could potentially be a promising alternative for remediation of TBBPA-contaminated aquatic environments.

Research progress on the origin, fate, impacts and harm of microplastics and antibiotic resistance genes in wastewater treatment plants

Previous studies reported microplastics (MPs), antibiotics, and antibiotic resistance genes (ARGs) in wastewater treatment plants (WWTPs). There is still a lack of research progress on the origin, fate, impact and hazards of MPs and ARGs in WWTPs. This paper fills a gap in this regard. In our search, we used "microplastics", "antibiotic resistance genes", and "wastewater treatment plant" as topic terms in Web of Science, checking the returned results for relevance by examining paper titles and abstracts. This study mainly explores the following points: (1) the origins and fate of MPs, antibiotics and ARGs in WWTPs; (2) the mechanisms of action of MPs, antibiotics and ARGs in sludge biochemical pools; (3) the impacts of MPs in WWTPs and the spread of ARGs; (4) and the harm inflicted by MPs and ARGs on the environment and human body. Contaminants in sewage sludge such as MPs, ARGs, and antibiotic-resistant bacteria enter the soil and water. Contaminants can travel through the food chain and thus reach humans, leading to increased illness, hospitalization, and even mortality. This study will enhance our understanding of the mechanisms of action among MPs, antibiotics, ARGs, and the harm they inflict on the human body.

Efficient degradation of polystyrene microplastic pollutants in soil by dielectric barrier discharge plasma

In this study, the atmospheric dielectric barrier discharge (DBD) plasma was proposed for the degradation of polystyrene microplastics (PS-MPs) for the first time, due to its ability to generate reactive oxygen species (ROS). The local temperature in plasma was found to play a crucial role, as it enhanced the degradation reaction induced by ROS when it exceeded the melting temperature of PS-MPs. Factors including applied voltage, air flow rate, and PS-MPs concentration were investigated, and the degradation products were analyzed. High plasma energy and adequate supply of ROS were pivotal in promoting degradation. At 20.1 kV, the degradation efficiency of PS-MPs reached 98.7% after 60 min treatment, with gases (mainly COx, accounting for 96.4%) as the main degradation products. At a concentration of 1 wt%, the PS-MPs exhibited a remarkable conversion rate of 90.6% to COx, showcasing the degradation performance and oxidation degree of this technology. Finally, the degradation mechanism of PS-MPs combined with the detection results of ROS was suggested. This work demonstrates that DBD plasma is a promising strategy for PS-MPs degradation, with high energy efficiency (8.80 mg/kJ) and degradation performance (98.7% within 1 h), providing direct evidence for the rapid and comprehensive treatment of MP pollutants.

Analysis and identification of degradation products in gas, particle, and liquid phases of polypropylene and polyethyleneterephthalate microplastics aging through non-thermal plasma simulation

Plastic aging can cause alterations in the physical and chemical characteristics of plastics, as well as their behavior in the environment. Due to the extremely slow natural aging process, laboratory simulated aging methods have to be used. In this study, non-thermal plasma (NTP) was adopted to investigate the aging process of polypropylene (PP) and polyethylene terephthalate (PET) microplastics. Various analytical instruments, including proton transfer reaction mass spectrometry and single-particle aerosol mass spectrometry, were employed to examine and identify the organic constituents of the gas, liquid, and particle phase degradation products, as well as to monitor the degradation process. The results showed that after 90 min of aging, both PP and PET surfaces showed yellowing, and the carbonyl index of PP increased while that of PET decreased, with an increase in crystallinity. The organic components of reaction products, such as ketones, esters, acids, and alcohols, increased with longer aging times. Gas products mainly contain aromatic hydrocarbons, while particles from aged PET contain compounds with benzene rings and metal elements. Liquid products from aged PP show a significant presence of branched alkanes. Based on this analysis, degradation mechanisms of PP and PET by NTP were proposed. This investigation represents the initial systematically exploration of the release of organic substances during the degradation of microplastics mediated by NTP. It provides significant insights into the detrimental organic compounds emitted during this process, thereby offering valuable information for understanding the environmental and human health implications of natural microplastic degradation. Furthermore, it addressed the requirements for increased attention to the potential environmental risks associated with these harmful components.

Photoaging enhances combined toxicity of microplastics and tetrabromobisphenol A by inducing intestinal damage and oxidative stress in Caenorhabditis elegans

Microplastics (MPs) are emerging environmental contaminants that often co-exist with tetrabromobisphenol A (TBBPA) in the environment. However, the joint effect of TBBPA and photoaged MPs at ambient concentrations remains unknown largely. In this study, the combined toxicity of ultraviolet-aged polystyrene (UV-PS) and TBBPA was investigated in Caenorhabditis elegans. UV irradiation could change the physical and chemical characteristics of polystyrene (PS), and UV-PS (90.218 μg/g) showed a stronger adsorption capacity than PS of 79.424 μg/g. Toxicity testing showed that 1 μg/L UV-PS enhanced the toxic effect of 1 μg/L TBBPA by reducing body length, locomotion behavior, and brood size in nematodes. Using ROS production, lipofuscin accumulation, and expression of gst-4::GFP as endpoints, the combined exposure of UV-PS and TBBPA induced stronger oxidative stress than TBBPA alone. Joint exposure to UV-PS and TBBPA significantly increased of Nile red and blue food dye in its intestinal tract compared to that in the TBBPA exposure group, indicating that co-exposure enhanced intestinal permeability. After co-exposure to UV-PS and TBBPA, the expression of the associated genes detected increased significantly. Therefore, UV-PS enhances the adverse effects of TBBPA through intestinal damage and oxidative stress in nematodes. These findings suggest that the co-presence of photoaged PS and TBBPA results in high environmental risks.

Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

Application of advanced oxidation processes for the removal of micro/nanoplastics from water: A review

Micro/nanoplastics (MNPs) have been increasingly found in environments, food, and organisms, arousing wide public concerns. MNPs may enter food chains through water, posing a threat to human health. Therefore, efficient and environmentally friendly technologies are needed to remove MNPs from contaminated aqueous environments. Advanced oxidation processes (AOPs) produce a vast amount of active species, such as hydroxyl radicals (·OH), known for their strong oxidation capacity. As a result, an increasing number of researchers have focused on using AOPs to decompose and remove MNPs from water. This review summarizes the progress in researches on the removal of MNPs from water by AOPs, including ultraviolet photolysis, ozone oxidation, photocatalysis, Fenton oxidation, electrocatalysis, persulfate oxidation, and plasma oxidation, etc. The removal efficiencies of these AOPs for MNPs in water and the influencing factors are comprehensively analyzed, meanwhile, the oxidation mechanisms and reaction pathways are also discussed in detail. Most AOPs can achieve the degradation of MNPs, mainly manifest as the decrease of particle size and the increase of mass loss, but the mineralization rate is low, thus requiring further optimization for improved performance. Investigating various AOPs is crucial for achieving the complete decomposition of MNPs in water. AOPs will undoubtedly play a vital role in the future for the removal of MNPs from water.

Seawater Accelerated the Aging of Polystyrene and Enhanced Its Toxic Effects on Caenorhabditis elegans

Microplastics (MPs) are emerging pollutants and pose a significant threat to marine ecosystems. Although previous studies have documented the mechanisms and toxic effects of aging MPs in various environments, the impact of the marine environment on MPs remains unclear. In the present study, the aging process of polystyrene (PS) in seawater was simulated and the changes in its physicochemical properties were investigated. Our results showed that the surface of the PS eroded in the seawater, which was accompanied by the release of aged MPs with a smaller size. In situ optical photothermal infrared microspectroscopy revealed that the mechanism of PS aging was related to the opening of the carbonyl group and breaking of the bond between carbon and benzene removal. To verify the toxic effects of aged PS, Caenorhabditis elegans was exposed to PS. Aged PS resulted in a greater reduction in locomotion, vitality, and reproduction than virgin PS. Mechanistically, aged PS led to oxidative stress, high glutathione s-transferase activity, and high total glutathione in worms. Together, our findings provided novel information regarding the accelerated aging of PS in seawater and the increased toxicity of aged PS, which could improve our understanding of MPs' ecotoxicity in the marine environment.

A characterization and an exposure risk assessment of microplastics in settled house floor dust in Istanbul, Turkey

The presence of microplastics in the indoor environment presents growing environmental and human health risks because of their physicochemical and toxic characteristics. Therefore, we aimed to isolate, identify, and characterize plastic debris in settled house floor dusts. This study is a rare study which assess the risks of plastic debris in settled house dust through multiple approaches including the estimated daily intake, pollution loading index, and polymer hazard index. The results indicated that polyethylene and polypropylene were the predominate polymer type of plastic debris in settled house dust with various shapes and colors. The risk assessment results also indicated the serious impact of microplastics in terms of extremely dangerous contamination as well as the fact that they present a polymer hazard. Results indicated that humans have a higher risk of exposure to microplastics via ingestion rather than inhalation. In addition, infants had a higher risk of potential intake compared to other age groups.

Alteration of microbial mediated carbon cycle and antibiotic resistance genes during plastisphere formation in coastal area

Microorganisms can attach on the surface of microplastics (MPs) through biological fouling process to form a diverse community called the "plastisphere", which has attracted extensive attention. Although the microbial structure and composition of biofilm have been studied, the knowledge of its microbial function and ecological risk is still limited. In this study, we investigated how the surface properties of MPs affect the biofilm communities and metabolic features under different environmental conditions, and explored the biofilm enrichment of antibiotic resistance genes (ARGs). The results showed that the incubation time, habitat and MPs aging state significantly influenced the structure and composition of biofilm microbial communities, and a small amount of pathogens have been found in the MPs-attached biofilm. The microbial carbon utilization capacity of the biofilm in different incubation habitats varies greatly with highest metabolism capacity appear in the river. The utilization efficiency of different carbon sources is polymer > carbohydrate > amino acid > carboxylic acids > amine/amide, which indicates that the biofilm communities have selectivity between different types of carbon sources. More importantly, ARGs were detected in all the MPs samples and showed a trend of estuary > river > marine. The aged MPs can accumulate more ARGs than the virgin items. In general, MPs in the aquatic environment may become a carrier for pathogens and ARGs to spread to other environment, which may enhance their potential risks to the ecosystem and human health.

Microplastic contamination in Indian rural and urban lacustrine ecosystems

This study investigates the microplastics (MPs) pollution of the lacustrine ecosystems of Tamil Nadu, South India. It examines the seasonal distribution, characteristics and morphology of MPs and assesses the risk posed by MPs pollution. MPs abundance in the 39 rural and urban lakes studied varies from 16 ± 2.69 to 118.17 ± 22.17 items/L (water) and 19.50 ± 4.75 to 156.23 ± 36.41 items/kg (sediment). The water and sediment of urban lakes show average MPs abundances of 88.06 items/L and 115.24 items/kg respectively, while the rural lakes exhibit average MPs abundances of 42.98 items/L and 53.29 items/kg. The results demonstrate that study areas with more residential and urban centers with higher population density and larger discharge of sewage have greater MP abundance. Urban zones have greater MP diversity integrated index (MPDII = 0.73) than rural zones (MPDII = 0.59). Fibres are the dominant group and polyethylene and polypropylene are the most commonly found polymers, possibly gaining entry through land-based plastic litter and urban activities in this region. The weathering index values, 50 % of MPs exhibit high degree of oxidation (WI >0.31) with an age of >10 years. SEM-EDAX results reveal that the weathered MPs from urban lakes have a wider variety of metal elements (Al, Cr, Mn, Co, Ni, Cu, Zn, As, Sr, Hg, Pb and Cd) than those from rural lakes (Na, Cl, Si, Mg, Al, Cu). Though PLI shows low risk (<10) in terms of abundance, PHI reflects pollution status III (10-100) and IV (100-1000) in rural areas and IV and V (>1000) in urban areas based on the toxicity score of the polymer. Ecological risk assessment shows minor risks (<150) at present. The assessment indicates the risk posed by the MPs to the lakes studied and emphasizes the necessity for best MP management practices in future.

Exploring the release of hazardous volatile organic compounds from face masks and their potential health risk

Hazardous chemicals released from the petroleum-derived face mask can be inhaled by wearers and cause adverse health effects. Here, we first used headspace solid-phase microextraction coupled with GC-MS to comprehensively analyze the volatile organic compounds (VOCs) released from 26 types of face masks. The results showed that total concentrations and peak numbers ranged from 3.28 to 197 μg/mask and 81 to 162, respectively, for different types of mask. Also, light exposure could affect the chemical composition of VOCs, particularly increasing the concentrations of aldehydes, ketones, organic acids and esters. Of these detected VOCs, 142 substances were matched to a reported database of chemicals associated with plastic packaging; 30 substances were identified by the International Agency for Research on Cancer (IARC) as potential carcinogenic to humans; 6 substances were classified in the European Union as persistent, bioaccumulative, and toxic, or very persistent, very bioaccumulative substance. Reactive carbonyls were ubiquitous in masks, especially after exposure to light. The potential risk of VOCs released from the face masks were then accessed by assuming the extreme scenario that all the VOC residues were released into the breathing air within 3 h. The result showed that the average total concentration of VOCs (17 μg/m3) was below the criterion for hygienic air, but seven substances, 2-ethylhexan-1-ol, benzene, isophorone, heptanal, naphthalene, benzyl chloride, and 1,2-dichloropropane exceeded the non-cancer health guidelines for lifetime exposure. This finding suggested that specific regulations should be adopted to improve the chemical safety of face masks.

Physiological effects and molecular response in the marine rotifer Brachionus plicatilis after combined exposure to nanoplastics and copper

Because nanoplastics (NPs) can transport pollutants, the absorption of surrounding pollutants into NPs and their effects are important environmental issues. This study shows a combined effect of high concentrations of NPs and copper (Cu) in the marine rotifer Brachionus plicatilis. Co-exposure decreased the growth rate, reproduction, and lifespan. The highest level of NP ingestion was detected in the co-treated group, but the Cu concentration was higher in the Cu single-exposure group. ERK activation played a key role in the downstream cell signaling pathway activated by the interaction of NPs and Cu. The increased sensitivity of B. plicatilis to Cu could be due to the impairment of MXR function caused by a high concentration of NPs, which supports our in vivo experiment results. Our results show that exposure to NPs could induce the dysfunction of several critical molecular responses, weakening resistance to Cu and thereby increasing its physiological toxicity in B. plicatilis.

Probing the aging process and mechanism of microplastics under reduction conditions

Microplastics (MPs) are becoming a class of pollutants with high global concerns. Research on the aging of MPs has focused on oxidative environments, it is of great interest to study the aging of MPs under reduction conditions. In this study, a reduction environment was constructed by purging nitrogen and adding reducing agents (NaBH₄, VC, Na₂S, C₂Na₂O₄) to understand the aging behavior and mechanism of MPs. The results proved that PVC occurred aging under four reduction conditions, and the aging degree was the strongest under NaBH₄ reduction condition. The aged PVC became broken, particle size decreased, and dechlorination phenomenon was observed. These phenomena were more obvious under the reduction condition in light, which was the superposition of photo-aging and reduction aging. The functional group components of PVC changed (C-C/CC increased, and oxygen-containing functional groups decreased) under reduction conditions, but photo-aging was dominant in the light system. Electron transfer occurred during the reduction process, and the EDC of PVC aged increased and EAC decreased. This study may shed light on a highly efficient aging pathway of MPs that is often overlooked in nature, contributing to understanding the aging behavior of MPs in complex environments.

Photoaging process and mechanism of four commonly commercial microplastics

Microplastics (MPs) are the widespread emerging pollutants in the terrestrial systems, and photo-oxidation is an effective process for aging MPs on land. Here, four common commercial MPs were exposed to ultraviolet (UV) light to simulate the photo-aging of MPs on soil, and the changes in surface properties and eluates of photoaging MPs were studied. Results revealed that polyvinyl chloride (PVC) and polystyrene (PS) exhibited more pronounced physicochemical changes than polypropylene (PP) and polyethylene (PE) during photoaging on the simulated topsoil, due to the dechlorination of PVC and the debenzene ring of PS. Oxygenated groups accumulated in aged MPs were strongly correlated with dissolved organic matters (DOMs) leaching. Through analysis of the eluate, we found that photoaging altered the molecular weight and aromaticity of DOMs. PS-DOMs showed the greatest increase in humic-like substances after aging, whereas PVC-DOMs exhibited the highest amount of additive leaching. The chemical properties of additives explained their differences in photodegradation responses, which also accounted for the greater importance of chemical structure of MPs to their structural stability. These findings demonstrate that the extensive presence of cracks in aged MPs facilitates DOMs formation and the complexity of DOMs composition poses a potential threat to soil and groundwater safety.

Aging of biodegradable-mulch-derived microplastics reduces their sorption capacity of atrazine

Degradable plastics are gradually regarded as alternatives of conventional, synthetic organic polymers to reduce the plastics or microplastics (MPs) pollution; however, the reports upon environmental risk of degradable plastics are still limited. In order to evaluate the potential vector effect of biodegradable MPs on coexisting contaminants, sorption of atrazine onto pristine and ultraviolet-aged (UV) polybutylene adipate co-terephthalate (PBAT) MPs and polybutylene succinate co-terephthalate (PBST) MPs were investigated. The results showed that, UV aging led to more wrinkles and cracks on the surface, increased homogeneous chains proportion, enhanced hydrophobicity, and enlarged crystallinity of both MPs. The sorption kinetics of atrazine to MPs fitted well into pseudo-first-order (R² = 0.809-0.996) and pseudo-second-order (R² = 0.889-0.994) models. In the concentration range of 0.5-25 mg L^-1, the sorption isotherm fitted into linear (R² = 0.967-0.996) and Freundlich model (R² = 0.972-0.997), indicating that the absorption partitioning was the dominant sorption mechanism. The partition coefficient (K_d) of atrazine to PBAT- MPs (40.11-66.01 L kg^-1) was higher than that of PBST- MPs (34.34-57.96 L kg^-1), and the K_d values of both MPs declined for aged MPs. The specific surface area, hydrophobicity, polarity and crystallinity of MPs jointly interpreted the changing sorption capacity of the MPs. In the present study, both aged PBAT- and aged PBST- MPs exhibited lower vector potential to atrazine than pristine MPs, suggesting reduced risk of being a pollutant carrier, which is of great significance for the development of biodegradable plastics.

Polyethylene mulch film-derived microplastics enhance the bioaccumulation of atrazine in two earthworm species (Eisenia fetida and Metaphire guillelmi) via carrier effects

Microplastics (MPs) may significantly affect the bioavailability of coexisting pollutants in soil by adsorption-desorption behavior. However, the mechanisms underlying these interaction remain unclear. Herein, the influence of unused polythylene mulch film-derived MPs (MFMPs) and farmland residual polyethylene mulch film-derived MPs (MFMPs-aged) on the adsorption-desorption behavior and bioavailability of atrazine (ATZ) in soil were investigated. The adsorption kinetics and the adsorption isotherms of ATZ on soil, MFMPs, and MFMPs-aged fitted well by the pseudo-second-order model and the Langmuir model, respectively. ATZ were easier to desorb from soil, MFMPs, and MFMPs-aged in the simulated earthworm digestive fluid than that in the CaCl₂ solution. The adsorption and desorption capacities of MFMPs and MFMPs-aged for ATZ were higher than those of soil, especially for MFMPs-aged. The existence of MPs in soil strengthened the adsorption and desorption capacities of ATZ, and the strengthened effects were promoted by the addition amount and aging process of MPs. Moreover, the occurrence of MPs significantly increased the bioaccumulation of ATZ in earthworms, especially for MFMPs-aged. This study deepens the knowledge of the interaction mechanisms of mulch film-derived MPs and pesticide pollution.

Adsorption of 2-hydroxynaphthalene, naphthalene, phenanthrene, and pyrene by polyvinyl chloride microplastics in water and their bioaccessibility under in vitro human gastrointestinal system

The interaction of microplastics (MPs) and organic pollutants has recently become a focus of investigation. To understand how microplastic residues affect the migration of organic pollutants, it is necessary to examine the adsorption and desorption behavior of organic pollutants on MPs. In this study, integrated adsorption/desorption experiments and theoretical calculations were used to clarify the adsorption mechanism of 2-hydroxynaphthalene (2-OHN), naphthalene (NAP), phenanthrene (PHE), and pyrene (PYR) by polyvinyl chloride microplastics (PVC-MPs). Based on the phenomenological mathematical models, the rate-limiting step for analyte adsorption onto PVC-MPs was adsorption onto active sites (R² = 0.865-0.995). Except for PHE, analyte adsorption isotherms were well described by the Freundlich model (R² = 0.992-0.998), and adsorption thermodynamics showed that analyte adsorption on PVC-MPs was a spontaneous exothermic process (ΔH⁰ < 0; ΔG⁰ < 0). Based on the order of adsorption efficiency of 2-OHN < NAP < PHE < PYR, which is identical to the competitive adsorption experiment, polycyclic aromatic hydrocarbon (PAH) adsorption on PVC-MPs increased as the aromatic ring number increased and the hydroxyl content decreased. The release of 2-OHN (49 %-52 %) from PVC-MPs into the simulated gastrointestinal environment was greater than that of NAP (5.5 %-5.7 %). Theoretical calculations and adsorption tests indicated that hydrophobic interaction was the primary influence on the adsorption of PAHs and their hydroxylated derivatives by PVC-MPs. These findings improve our understanding of MPs' behavior and dangers as pollutant carriers in the aquatic environment and help us develop recommendations for the pollution control of MPs.

Photoaging of Typical Microplastics as Affected by Air Humidity: Mechanistic Insights into the Important Role of Water Molecules

Recent studies showed that land is the most important sink for microplastics (MPs); however, limited information is available on the photoaging processes of land surface MPs that are exposed to the air. Herein, this study developed two in situ spectroscopic methods to systematically explore the effect of air humidity on MP photoaging using a microscope of Fourier transform infrared spectroscopy and a laser Raman microscope, which were equipped with a humidity control system. Polyethylene microplastics, polystyrene microplastics, and poly(vinyl chloride) microplastics (PVC-MPs) were used as model MPs. Our results showed that relative humidity (RH) could significantly influence the MP surface oxygen-containing moieties generated from photo-oxidation, especially for PVC-MPs. As the RH level varied from 10 to 90%, a decrease in the photogenerated carbonyl group and an increase in the hydroxyl group were observed. This could be attributed to the involvement of water molecules in the production of hydroxyl groups, which subsequently inhibited carbonyl generation. Moreover, the adsorption of coexisting contaminants (i.e., tetracycline) on photoaged MPs exhibited strong RH dependence, which could be assigned to the varied hydrogen bonding between tetracycline carbonyls and aged MP surface hydroxyls. This study reveals a ubiquitous but previously overlooked MP aging route, which may account for the changed MP surface physiochemical properties under solar irradiation.

Diversity, abundance and distribution characteristics of potential polyethylene and polypropylene microplastic degradation bacterial communities in the urban river

Carbon chain microplastics, polyethylene (PE), and polypropylene (PP) are the main types of refractory organics. Compared to heterochain microplastics, PE/PP degrading bacterial community and their distribution characteristics in natural rivers are unclear. In this study, the field in situ experiment and indoor enrichment experiment with PE/PP resin as only carbon sources were conducted for a total period of 1150 days. The microbial degradation of pure PE/PP resin was determined by SEM, FTIR, CLSM, GC-MS, and GPC. The Chao 1 index and Invsimpson index of the bacterial community significantly reduced after a series of incubation, demonstrating that the bacterial community was selectively enriched. Empirical core PE/PP degrading bacteria (C-bacteria) and resuscitated PE/PP degrading bacteria (R-bacteria) were screened based on the variation of the abundance of OTUs, and co-occurrence analysis displayed that C-bacteria presented higher betweenness centrality than R-bacteria. The higher abundance and diversity of R-bacteria in biofilms suggest the presence of many rare or low abundance bacteria in natural rivers that may be potential PE/PP degrading bacteria or PE/PP degrading bacteria to be activated, while the lower abundance and diversity of C-bacteria support the slow degradation rate of PE and PP in waters. Compared to the isolated and indicatory PE/PP degrading bacterial genera, the C-bacteria OTUs or genera enriched in this study displayed higher richness and abundance. Enriched PE/PP degrading bacteria occurred in all sampled sites of the Qinhuai River with higher abundance and standard betweenness centrality in sediments (averaging 0.01354 and 0.44421, respectively) than those in overlying water (averaging 0.00536 and 0.17571, respectively), while the highest abundance of degrading bacteria presented in the eutrophic sediments. Inorganic nitrogen was determined to be significantly correlated with the distribution of PE/PP degrading bacteria in sediments via redundancy analysis. This study provides a new perspective on the natural degradation potential of carbon chain microplastics by microbial communities in rivers.

Characteristics and behaviors of microplastics undergoing photoaging and Advanced Oxidation Processes (AOPs) initiated aging

The fact that 94% of microplastics (MPs) ubiquitous in the environment are subject to natural weathering makes the aging study currently a research hotspot. This review summarized the physicochemical characteristics of MPs undergoing natural and artificial aging and evaluated current analytical methods used in aging studies. Besides, the differences in photoaging and aging induced by advanced oxidation processes (AOPs) were discussed, leading to a conclusion that AOPs composed of oxidant and ultraviolet (UV) irradiation can better facilitate the alteration of MPs compared to UV irradiation alone. In addition, the environmental behavior of aged MPs was outlined and their adsorption properties for organics and metals were highlighted as a result of combined effects of hydrophobic, π-π, diffusion, and hydrogen bond interaction. Furthermore, the mechanisms of photoaging and AOPs-initiated aging were analyzed, mainly the role of reactive oxygen species (ROS) and environmentally persistent free radicals (EPFRs). Finally, the applications of two-dimensional correlation spectroscopy (2D-COS) and three-dimensional fluorescence spectra using excitation emission matrix-parallel factor analysis (EEM-PARAFAC) were discussed for the aging process analysis. This overview plays an important role in explaining the aging characteristics of MPs and provides a theoretical foundation for further investigations into their toxicity and removal.

Ozonation facilitates the aging and mineralization of polyethylene microplastics from water: Behavior, mechanisms, and pathways

Microplastics (MPs) are ubiquitous in the environment, of which 94 % undergo the aging process. Accelerated aging induced by advanced oxidation processes (AOPs) is significant in explaining the formation pathway of secondary MPs and enables possible mineralization. In this study, ozonation coupled with hydrogen peroxide (O₃/H₂O₂), a type of AOPs, was applied for the aging of MPs (polyethylene, PE). Physiochemical properties of aged PE MPs were analyzed through scanning electron microscope, Fourier-transform infrared spectroscopy-attenuated total reflection, and X-ray photoelectron spectroscopy. The mechanism regarding the contribution of reactive oxygen species (•OH) was determined using chemical probe (p-chlorobenzoic acid) and quencher (tert-butanol). Possible transformation pathways were modeled via two-dimensional correlation spectroscopy. Mineralization of MPs, associated with aging was also studied, with the percentage of PE degradation determined by mass loss. Our results confirmed that ozonation promoted fragmentation of PE, with 20 mM H₂O₂ facilitating the production of •OH. The growth of oxygen-containing functional groups on the surface of PE was consistent with the alteration of the oxygen-to‑carbon atom ratio, revealing the formation of CO, CO, and C-O-C. The enhanced adsorption property of aged PE for triclosan was due to the increased specific surface area and negative charges on the surface. Moreover, the percentage of PE degradation was higher at lower concentrations, and the mass loss reached 32.56 % at a PE concentration of 0.05 g/L after 8-h ozonation. These results contribute to revealing the long-term aging behavior of MPs and providing significant guidance for employing AOPs to achieve efficient removal.

Unveiling interactions of norfloxacin with microplastic in surface water by 2D FTIR correlation spectroscopy and X-ray photoelectron spectroscopy analyses

Microplastics (MPs) has shown adsorption of hydrophilic organic matters (HOMs) in aqueous environments. However, it is still difficult to predict the adsorption behaviors of HOMs by different MPs, especially in authentic water systems. In this study, the adsorption behaviors and mechanisms of norfloxacin (NOR) onto polyamide (PA) MPs were investigated in both simulated and real surface water. The results showed that the adsorption equilibrium of NOR by PA in simulated surface water could be achieved within 15 h, while the adsorption rate of NOR in real surface was slowed down, with the equilibrium time of 25 h. Pseudo-second-order model could well describe the adsorption kinetics data. The experimental maximum adsorption capacity of NOR on PA in real surface water (e. g. 132.54 ug/g) was dramatically reduced by 37.5 % compared with that in simulated surface water (e. g. 212.25 ug/g), and the adsorption isotherm would obey Freundlich model. Besides, the leaching of NOR from the surface of PA could occur obviously at acidic environment. Furthermore, the salinity and natural organic matter exhibited significantly adverse effects on the NOR adsorption. Finally, the results of 2D Fourier transform infrared correlation spectroscopy and X-ray photoelectron spectroscopy indicated that the electrostatic, H-bond and van der Waals interactions were involved in the adsorption. More importantly, the sequential functional groups in the adsorption process followed the orders: 1638 (CO) > 1542 amide II (-NH-CO) > 717 (CH₂) > 1445 (CO) > 973 amide IV (CONH). This study could provide an insight into the interactions between PA and NOR in different water environments.

Laboratory simulated aging methods, mechanisms and characteristic changes of microplastics: A review

Microplastics (MPs) aging occurs in all environmental medias and affects the environmental behaviour and toxicity of MPs. Due to the extremely slow process of aging, laboratory simulated aging methods have had to be used to research the properties, behaviour, toxicity and effects of aged MPs. However, multiple laboratory aging methods with different mechanisms have led to divergent viewpoints on the characteristics, behavior and toxicity of aged MPs. Therefore, this paper reviewed the main laboratory MPs aging methods and mechanism, including those that involve UV, advanced oxidation processes (AOPs), sunlight or simulated sunlight, chemical treatment, heat, plasma radiation, etc. As a technology with a low time cost, AOPs have potential and are recommended. Physical, chemical, and coupled aging significantly alter MPs surface topography and functional groups, which affect MPs adsorption, migration and toxicity. However, the effects of aging on environmental behaviour and toxicity are highly uncertain. The carbonyl index (CI) and O/C ratio are generally applied to evaluate the MPs aging degree. This review highlights the need to provide adequate information on coupled simulated aging methods to allow better elucidation of the underlying mechanisms of aging and its effect on MPs environmental behaviour and toxicity.

Anti-scaling performances of different aged landfill leachates on PPR and ABS pipe materials

Landfill leachate, because of its complex components, may cause pipe clogging during its collection and transportation, and pose a threat to the environment. This study considers two typical drainage pipe materials, i.e., polypropylene-random (PPR) and acrylonitrile-butadiene-styrene (ABS), to discriminate their anti-scaling performances through a landfill leachate immersion experiment. The results show that both PPR and ABS pipe materials immersed in the younger-aged leachate are prone to scaling. The mass concentrations of Ca²⁺ in the leachate play a key role in scale formation, followed by Mg²⁺, pH, oxidation-reduction potential (ORP), dissolved oxygen (DO), and Cl^-. In particular, Ca²⁺, pH, and DO show a positive relationship in scaling, while Mg²⁺ acts in a negative relationship. Calcium carbonate is the major constituent of the scales, accounting for 72.3% of the total. The scaling on the surface of the PPR pipe material is more serious than that of the ABS pipe material, revealed by the corresponding weight increment that is 33% higher than that related to ABS during the experimental period. It is thus indicated that ABS has better anti-scaling performance, which may be an optional material selected for the system design of leachate collection and transportation.

Sorption and desorption of bisphenols on commercial plastics and the effect of UV aging

Plastics gradually degrade in the natural environment from the effect of irradiation, which can change the surface properties of plastics and affect the migration behaviour of pollutants. Up to now, studies on the sorption/desorption behaviour of organic pollutants on aged plastics are still limited. In this study, several types of commercial plastics (polyurethane (PU), polyamide (PA), polyvinyl chloride (PVC), expanded polystyrene (EPS)) were selected to investigate the sorption and release behaviour for four kinds of bisphenols (bisphenol-F, A, B, AP). The results from Raman spectroscopy and scanning electron microscopy (SEM) analysis showed evidence of oxidization and surface cracks of plastics after irradiation. The sorption behaviour for both fresh and aged plastics were dominated by hydrophobicity. In addition, the electrostatic force, H-bonding interaction, and π-π interaction were also the important factors impacting the sorption process. The desorption kinetics behaviour indicates that desorption becomes faster after aging. Hydrophobicity is also an important factor that affects desorption behaviour. This study showed that sorption capacity for most fresh and aged plastics was enhanced by the impact of salinity and dissolved organic matter (DOM). Increased temperature could increase the desorption of bisphenols on both fresh and aged plastics, which illustrated that warm environments would promote more pollutants be released from plastics to water bodies.

Microplastics: Occurrences, treatment methods, regulations and foreseen environmental impacts

Microplastics are a silent threat that represent a high degree of danger to the environment in its different ecosystems and of course will also have an important impact on the health of living organisms. It is evident the need to have effective treatments for their treatment, however this is not a simple task, this as a result of the behavior of microplastics in wastewater treatment plants due to their different types and nature, their long molecular chain, reactivity against water, size, shape and the functional groups they carry. Wastewater treatment plants are at the circumference of the release of these wastes into the environment. They often act as a source of many contaminations, which makes this problem more complex. Challenges such as detection in the current scenario using the latest analytical techniques impede the correct understanding of the problem. Due to microplastics, treatment plants have operational and process stability problems. This review paper will present the in-depth situation of occurrence of microplastics, their detection, conventional and advanced treatment methods as well as implementation of legislations worldwide in a comprehensive manner. It has been observed that no innovative or new technologies have emerged to treat microplastics. Therefore, in this article, technologies targeting wastewater treatment plants are critically analyzed. This will help to understand their fate, but also to develop state-of-the-art technologies or combinations of them for the selective treatment of microplastics. The pros and cons of the treatment methods adopted and the knowledge gaps in legislation regarding their implementation are also comprehensively analyzed. This critical work will offer the development of new strategies to restrict microplastics.

Aged microplastics enhance their interaction with ciprofloxacin and joint toxicity on Escherichia coli

Microplastics (MPs) in natural environments undergo complex aging processes, changing their interactions with coexisting antibiotics, and posing unpredictable ecological risks. However, the joint toxicity of aged MPs (aMPs) and antibiotics to bacteria, especially at the molecular level, is unclear. In this study, non-thermal plasma technology was used to simultaneously simulate various radical oxidation and physical reactions that occur naturally in the environment, breaking the limitation of simple aging process in laboratory aging technologies. After aging, we investigated the altered properties of aMPs, their interactions with ciprofloxacin (CIP), and the molecular responses of E. coli exposed to pristine MPs (13.5 mg/L), aMPs (13.5 mg/L), and CIP (2 μg/L) individually or simultaneously. aMPs bound far more CIP to their surfaces than pristine MPs, especially in freshwater ecosystems. Notably, the growth of E. coli exposed to aMPs alone was inhibited, whereas pristine MPs exposure didn't affect the growth of E. coli. Moreover, the most differentially expressed genes in E. coli were induced by the coexposure of aMPs and CIP. Although E. coli depended on chemotaxis to improve its flagellar rotation and escaped the stress of pollutants, the coexposure of aMPs and CIP still caused cell membrane damage, oxidative stress, obstruction of DNA replication, and osmotic imbalance in E. coli. This study filled the knowledge gap between the toxicity of aMPs and pristine MPs coexisting with antibiotics at the transcription level, helping in the accurate assessment of the potential risks of MPs to the environment.

The interaction of micro/nano plastics and the environment: Effects of ecological corona on the toxicity to aquatic organisms

Concerns about the micro/nano plastics (MNPs) exposure risks have risen in recent years. The ecological corona (EC), which is generated by the interaction between MNPs and environmental substances, has a significant impact on their environmental fate and ecological risks. As the largest sink of MNPs, the aquatic environment is of great significance for understanding the environmental behaviour of MNPs. Transmission Electron Microscope (TME), Fourier Transform Infra-Red (FTIR), Scanning Electron Microscope (SEM), Dynamic Light Scattering (DLS) and other analytical methods have been used as effective methods to analyse the formation process of EC and detect the existing EC directly or indirectly on the surface of MNPs. The physicochemical properties of MNPs, complex aquatic environments and ageing time have been identified as the key factors affecting EC formation in aquatic environments. Moreover, the EC absorbed on MNPs significantly changed their environmental behaviour and toxicity to aquatic organisms. This review gives a full understanding of the EC formation progress on the surface of MNPs and different analytical methods for EC have been summarised which can further assist the ecological risk assessment of MNPs in the aquatic environment.

Changes in metal adsorption ability of microplastics upon loss of calcium carbonate filler masterbatch through natural aging

CaCO₃ filler masterbatch (CFM) is one of the most commonly used fillers in polypropylene (PP) and polyethylene (PE) products, and its is used to enhance the toughness of the polymer matrix. This is the first study to investigate the loss of CaCO₃ and its impact on the adsorption ability of microplastics from plastic woven bags throughout the natural aging process. PP wire (PPw, 85% PP + 15% CFM) and PE film (PEf, 80% PE + 20% CFM) samples from plastic woven bags underwent a 250 d aging process in an open-air environment. Changes in the surface properties, morphology, CaCO₃ content, and density of PPw microplastics (PPw-MP) and PEf microplastics (PEf-MP) after various durations of aging were investigated by scanning electron microscopy, infrared spectroscopy, and thermogravimetric analysis. The results showed that CaCO₃ separated and agglomerated on the surfaces of PPw-MP and PEf-MP after 30 d. After 250 d, 42% of CaCO₃ was lost from PPw-MP and 28% was lost from PEf-MP, decreasing the density of the microplastic samples. CFM presented a considerably higher adsorption affinity toward Cu(II) than PP particles and PE particles; therefore, its presence in plastic matrix increased the adsorption ability of the products. The adsorption of Cu(II) on PPw-MP and PEf-MP decreased with aging because of the loss of CaCO₃ and poor development of O-containing functional groups. The q_m value (maximum adsorption quantity of Langmuir model) decreased from 11.01 mg/g in unaged PPw-MP to 1.35 mg/g in aged PPw-MP, and from 9.00 mg/g in unaged PEf-MP to 1.05 mg/g in aged PEf-MP. Overall, the findings demonstrate that CaCO₃ was crucial for the heavy metal-plastic interactions of the samples. Therefore, the results provide a basis to further clarify the potential environmental risks of plastic woven bags associated with heavy metal mobility.

Environmental behaviors and degradation methods of microplastics in different environmental media

Microplastics, as a group of emerging contaminants, are widely present in environmental media and have the potential to endanger the ecological environment and human health. Due to the inconsistencies and difficulties inherent in the analysis of microplastic particles, global monitoring data on the distribution of microplastics in the environment are still far from sufficient. The fate and migration of microplastics in the environment are also uncertain. Therefore, there have been increasing reviews on the distribution, biological effects, migration, and health risks of microplastics. However, reports focusing on the degradation of microplastics are still rare. Understanding and commanding the environmental behavior of microplastics are of great significance to explore the treatment of microplastic pollution. Although some preliminary studies on microplastics have been carried out, there is still an urgent need to conduct a comprehensive study on environmental behaviors and degradation methods of microplastics in different environmental media. This article summarizes the recent advances on microplastics, basically includes the distribution and ecological impact of microplastics in soil and water environments, then elaborates the migration behavior and influencing factors of microplastics, and focuses on the research progress of microplastics degradation methods. On this basis, the problems existing in the current research and the future development directions have been proposed. This review could provide a more systematic reference for the development and research of microplastics in the future.

New insights into the photo-degraded polystyrene microplastic: Effect on the release of volatile organic compounds

Excessive use of plastics leads to the ubiquity of plastic waste in the environment. Weathering can cause changes in the properties of plastics and lead to the release of various chemicals especially the volatile organic compounds (VOCs). Possible photodegradation pathway of polystyrene (PS) microplastics (MPs) was proposed and verified by the detection of VOCs. Headspace solid phase microextraction (HS-SPME) was employed to investigate the release behavior of VOCs from PS MPs exposed to simulated ultraviolet (UV). Results indicated that although the physicochemical properties of the PS MPs showed no significantly change after UV-irradiation, a variety of toxic VOCs, such as benzene, toluene, and phenol were detected from the irradiated MPs. UV irradiation progressively enhanced the release amount of VOCs with total concentration up to 66 μg g^-1 after 30 d of exposure, about 2.4 times higher than that stored in the darkness (27 μg g^-1). Some compounds (e.g., benzene and toluene) showed an upward trend over irradiation time, while others (e.g., styrene and 2-propenylbenzene) reduced over time. Results also found that the size of MPs could affect the release amounts but without consistent pattern for different VOCs detected in the headspace of the vial. In general, current study provided a new insight on the photo-aging process of MPs.

Antidote or Trojan horse for submerged macrophytes: Role of microplastics in copper toxicity in aquatic environments

Due to their unique surface structures and physicochemical properties, microplastics (MPs) can adsorb other contaminants, thus impacting their toxicity and fate in aquatic ecosystems. In the present study, the adsorption and transportation of copper ions (Cu²⁺) in polyethylene (PE, 5 and 150 μm) and their combined effects on four submerged macrophyte species were assessed. Results demonstrated that the addition of PE reduced the Cu²⁺ concentration in copper sulfate (CuSO₄) solution and the adsorption of Cu²⁺ in PE (10 mg/L) increased with CuSO₄ concentration (100-600 μmol/L). PE alone exhibited no inhibitory effects on macrophytes, while Cu²⁺ showed fatal toxicity toward the macrophytes. However, the combination of PE and Cu²⁺ showed lower inhibitory effects on macrophytes and the toxicity attenuation varied among species. Additionally, PE may act as a carrier (like a Trojan horse) for the environmental transfer of Cu²⁺, thereby hosting Cu²⁺ toxicity against macrophytes in the imported environment. Our findings indicate that PE acts as both an antidote to and carrier of Cu²⁺ toxicity in macrophytes. This study should help in clarifying the combined effects and risk assessments of MPs and heavy metals in future studies.

Photoaged polystyrene microplastics serve as photosensitizers that enhance cimetidine photolysis in an aqueous environment

Microplastics (MPs) have received much attention in recent years because of their continuous photoaging process in aquatic environments. However, little research has been conducted on the photochemistry of aged microplastics and the associated effects on coexisting pharmaceuticals. This study investigated the photodegradation of cimetidine via aged polystyrene microplastics (PS-MPs) with different aging times (0-7 d) under simulated sunlight irradiation (700 W/m²). PS-MPs with 5 d of aging time resulted in much faster cimetidine degradation (>99%) after 2 h of irradiation than pristine PS-MPs (<8%). The enhanced photodegradation of cimetidine by aged PS-MPs was related to the increase in chromophoric oxygenated groups (CO, C-O) followed by redshifted absorbance through the photoaging process, which induced the formation of the environmentally persistent free radicals (EPFRs) OH, ¹O₂ and ³PS*. However, only ¹O₂ and ³PS* contributed to enhanced cimetidine photodegradation, with ¹O₂ playing a more important role in our case. This work also demonstrated that other compounds that are susceptible to indirect photolysis, such as codeine and morphine, are likewise significantly degraded under irradiation in the presence of aged PS-MPs. Although previous studies have reported how MPs can increase the persistence of contaminants, this study demonstrates that MPs can serve as photosensitizers and alter the fate of coexisting pharmaceuticals in aquatic environments.