Insight into the key factors in fast adsorption of organic pollutants by hierarchical porous biochar

Graphite-N reinforced sludge biochar electrode: A experimental and DFT theoretical analysis of efficient evolution and in-situ utilization of H2O2

Rational reuse of municipal sludge to produce electro-Fenton electrode can not only save resources, but also produce superior peroxide and degradation pollutants simultaneously. Herein, a novel electro-Fenton electrode derived from sludge biochar loaded on Ni foam (SBC@Ni) was constructed via high temperature pyrolysis and chemical coating for efficient H2O2 evolution and pollutant degradation. Systematic experiments and density functional theory calculations (DFT calculation) explained that the production of graphite C and graphite N during high-temperature pyrolysis of municipal sludge can greatly enhance the oxygen reduction reaction of SBC@Ni electrode and promote the evolution of H2O2. And the hybrid heterojunctions, such as FeP, also played a key role in electrocatalytic processes. Notably, the electrode still exhibited excellent performance after 1000 linear scans and 12 h of continuous current stimulation, which demonstrated the excellent stability of the electrode. Moreover, SBC@Ni electrode can not only effectively oxidize 4-chlorophenol through the electro-Fenton effect, but also fully mineralize organic matter, indicating promising environmental application. The free radical quenching experiment also revealed that the ·OH is the main active species for 4-CP degradation in SBC@Ni electro-Fenton system.

Endogenous iron-enriched biochar derived from steel mill wastewater sludge for tetracycline removal: Heavy metals stabilization, adsorption performance and mechanism

Steel mill wastewater sludge, as an iron-enriched solid waste, was expected to be converted into iron-enriched biochar with acceptable environmental risk by pyrolysis. The purpose of our study was to evaluate the chemical speciation transformation of heavy metals in biochar under various pyrolysis temperatures and its reutilization for tetracycline (TC) removal. The experimental data indicated that pyrolysis temperature was a key factor affecting the heavy metals speciation and bioavailability in biochar, and biochar with pyrolysis temperature at 450 °C was the most feasible for reutilization without potential risk. The endogenous iron-enriched biochar (FSB450) showed highly efficient adsorption towards TC, and its maximum adsorption capacity could reach 240.38 mg g-1, which should be attributed to its excellent mesoporous structure, abundant functional groups and endogenous iron cycling. The endogenous iron was converted to a stable iron oxide crystalline phase (Fe3O4 and MgFe2O4) by pyrolysis, which underwent a valence transition to form a coordination complex with TC by electron shuttling in the FSB450 matrix. The study provides a win-win approach for resource utilization of steel wastewater sludge and treatment of antibiotic contamination in wastewater.

Seafood waste derived carbon nanomaterials for removal and detection of food safety hazards

Nanobiotechnology and the engineering of nanomaterials are currently the main focus of many researches. Seafood waste carbon nanomaterials (SWCNs) are a renewable resource with large surface area, porous structure, high reactivity, and abundant active sites. They efficiently adsorb food contaminants through π-π conjugated, ion exchange, and electrostatic interaction. Furthermore, SWCNs prepared from seafood waste are rich in N and O functional groups. They have high quantum yield (QY) and excellent fluorescence properties, making them promising materials for the removal and detection of pollutants. It provides an opportunity by which solutions to the long-term challenges of the food industry in assessing food safety, maintaining food quality, detecting contaminants and pretreating samples can be found. In addition, carbon nanomaterials can be used as adsorbents to reduce environmental pollutants and prevent food safety problems from the source. In this paper, the types of SWCNs are reviewed; the synthesis, properties and applications of SWCNs are reviewed and the raw material selection, preparation methods, reaction conditions and formation mechanisms of biomass-based carbon materials are studied in depth. Finally, the advantages of seafood waste carbon and its composite materials in pollutant removal and detection were discussed, and existing problems were pointed out, which provided ideas for the future development and research directions of this interesting and versatile material. Based on the concept of waste pricing and a recycling economy, the aim of this paper is to outline current trends and the future potential to transform residues from the seafood waste sector into valuable biological (nano) materials, and to apply them to food safety.

Coupling machine learning and theoretical models to compare key properties of biochar in adsorption kinetics rate and maximum adsorption capacity for emerging contaminants

Insights into key properties of biochar with a fast adsorption rate and high adsorption capacity are urgent to design biochar as an adsorbent in pollution emergency treatment. Machine learning (ML) incorporating classical theoretical adsorption models was applied to build prediction models for adsorption kinetics rate (i.e., K) and maximum adsorption capacity (i.e., Qm) of emerging contaminants (ECs) on biochar. Results demonstrated that the prediction performance of adaptive boosting algorithm significantly improved after data preprocessing (i.e., log-transformation) in the small unbalanced datasets with R2 of 0.865 and 0.874 for K and Qm, respectively. The surface chemistry, primarily led by ash content of biochar significantly influenced the K, while surface porous structure of biochar showed a dominant role in predicting Qm. An interactive platform was deployed for relevant scientists to predict K and Qm of new biochar for ECs. The research provided practical references for future engineered biochar design for ECs removal.

Multifunctional self-assembled adsorption microspheres based on waste bamboo shoot shells for multi-pollutant water purification

In this study, multilayer self-assembled multifunctional bamboo shoot shell biochar microspheres (BSSBM) were prepared, in which bamboo shoot shell biochar was used as the carrier, titanium dioxide as the intermediate medium, and chitosan as the adhesion layer. The adsorption behavior of BSSBM on heavy metals Ag(I) and Pd(II), antibiotics, and dye wastewater was systematically analyzed. BSSBM shows a wide range of adsorption capacity. BSSBM is a promising candidate for the purification of real polluted water, not only for metal ions, but also for Tetracycline (TC) and Methylene Blue (MB). The maximum adsorption amounts of BSSBM on Pd(II), Ag(I), TC and MB were 417.3 mg/g, 222.5 mg/g, 97.2 mg/g and 42.9 mg/g, respectively.The adsorption of BSSBM on Pd(II), MB and TC conformed to the quasi-first kinetic model, and the adsorption on Ag(I) conformed to the quasi-second kinetic model. BSSBM showed remarkable selective adsorption capacity for Ag(I) and Pd(II) in a multi-ion coexistence system. BSSBM not only realized the high value-added utilization of waste, but also had the advantages of low cost, renewable and selective adsorption. BSSBM demonstrated its potential as a new generation of multifunctional adsorbent, contributing to the recovery of rare/precious metals and the treatment of multi-polluted water.

A systematic review on enhancement strategies in biochar-based remediation of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are pervasive ecological pollutants produced essentially during the inadequate burning of organic materials. PAHs are a group of different organic compounds that are made out of various aromatic rings. PAHs pose a serious risk to humans and aquatic ecosystems because of their mutagenic and carcinogenic properties. In this way, there is a critical prerequisite to utilizing successful remediation strategies and methods to limit the dangerous effect of these pollutants on the ecosystem. Biochar has believed of intriguing properties such as simple manufacturing operations and more affordable and more productive materials. Biochar is a sustainable carbonaceous material that has an enormous surface area with bountiful functional groups and pore structure, which has huge potential for the remediation of toxic pollutants. This review emphasizes the occurrence, development, and fate of toxic PAHs in the environment. In the present review, the properties and role of biochar in the removal of PAHs were illustrated, and the influencing factors and an efficient key mechanism of biochar for the remediation of PAHs were discussed in detail. Various surface modification methods can be utilized to improve the biochar properties with the magnetization process; the advancements of modified biochar are pointed out in this review. Finally, the constraints and prospects for the large-scale application of biochar in the remediation of toxic pollutants are highlighted.

Efficient magnetic solid-phase extraction, UPLC-MS/MS detection, and consumption assessment of five trace psychoactive substances

Wastewater-based epidemiology (WBE) has become an objective and updated surveillance strategy for monitoring and estimating consumption trends of psychoactive substances (PSs) in the population. Firstly, magnetic shrimp shell biochar-based adsorbent (DZMBC) was synthesized and employed for extraction trace PSs from municipal wastewater. Proper pyrolysis temperature and increased KOH activator content favored the pore structure and surface area, thus facilitating extraction. DZMBC delivered exceptional extraction performance such as pH stability, anti-interference property, fast magnetic separation ability, reusability, and reproducibility. Then, a method based on magnetic solid-phase extraction (MSPE) followed by ultra-high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed, validated, and utilized for the quantitative determination of five PSs in real wastewater samples. Methodological validation results indicated a favorable linearity, low method limits of detection (1.00-4.75 ng/L), and good precisions (intra-day and inter-day relative standard deviations < 4.8%). Finally, an objective snapshot of Chongqing drug use and consumption pattern was obtained. Methamphetamine (MAMP) and 3,4-methylenedioxymethamphetamine (MDMA) were the prevalent illegal drugs in local. Both concentrations and per capita consumption of MDMA displayed a change (P < 0.05) between July and September, while no statistical differences were observed for each week.

Advances in Fe-modified lignocellulosic biochar: Impact of iron species and characteristics on wastewater treatment

Lignocellulosic biomass is an attractive feedstock for biochar production owing to its high abundance and renewability. Various modified biochars have been extensively studied for wastewater treatment to improve the physical and chemical properties of lignocellulosic biochar (L-BC). Particularly, Fe-modified L-BCs have garnered attention owing to the abundance and eco-friendliness of Fe and the outstanding ability to remove various organic and inorganic contaminants via adsorption, oxidation, reduction, and catalytic reactions. Different iron species (e.g., Fe(0), Fe (hydr)oxide, Fe sulfide, and Fe-Metal) are formed during the preparation of Fe-L-BCs, which can completely differentiate the physical and chemical properties of BCs. This review discusses the advances in the synthesis of different Fe-L-BCs, specific changes in the physical and chemical properties of Fe-L-BCs upon Fe addition, and their impacts on wastewater treatment. The results of this review can demonstrate the unique advantages and drawbacks of Fe-L-BCs for the removal of different types of pollutants.

High-efficient removal of anionic dye from aqueous solution using metal-organic frameworks@chitosan aerogel rich in benzene structure

With the exponentially increase of dye pollutants, the purification of dye wastewater has been an urgent ecological problem. As a novel type of porous adsorbent, metal-organic frameworks still face challenges in recyclability, agglomeration, and environmentally unfriendly synthesis. Herein, MOF-525 was in-situ growth onto the surface of the chitosan (CS) beads to fabricate MOF-525@CS aerogel. CS was utilized as substrate to uniformly disperse MOF-525, thereby significantly mitigating agglomeration and improving recyclability of MOF-525. The characterization results shown that MOF-525@CS aerogel had a high specific surface area of 103.0 m2·g-1, and MOF-525 was uniformly distributed in the 3D porous structure of CS, and the presence of benzoic acid was detected. The MOF-525@CS aerogel had a remarkable adsorption capacity of 1947 mg·g-1 for Congo red, which is greater than the sum of its parts. MOF-525@CS aerogel also inherited the rapid adsorption ability of MOF-525, removing 80 % of Congo red within 600 min. Such excellent adsorption performance can be attributed to the benzoic acid trapped by CS via CN band to enhance the π-π stacking interactions. Additionally, the utilization of benzoic acid makes the synthesis process of MOF-525@CS aerogel more environmentally friendly. The high-efficient MOF-525@CS aerogel is a competitive candidate for dye pollution adsorption.

Enhanced adsorption of roxarsone on iron-nitrogen co-doped biochar from peanut shell: Synthesis, performance and mechanism

Efficient removal of organic arsenic (roxarsone, ROX) from wastewater is highly demanded on the purpose of human health and environmental protection. This work aims to prepare Fe-N co-doped biochar (Fe-N-BC) via one-pot hydrothermal method using waste peanut shell, FeCl3·6H2O and urea, followed by pyrolysis. The effect of Fe-N co-doping on biochar's physicochemical properties, and adsorption performance for ROX were systematically investigated. At the pyrolysis temperature of 650 °C, Fe-N-BC-650 shows a significantly increased specific surface area of 358.53 m2/g with well-developed micro-mesoporous structure. Its adsorption capacity for ROX reaches as high as 197.32 mg/g at 25 °C, with > 90 % regeneration efficiency after multiple adsorption-desorption cycles. Correlation and spectral analysis revealed that the pore filling, π-π interactions, as well as hydrogen bonding play the dominant role in ROX adsorption. These results suggest that the Fe-N co-doped biochar shows great potential in the ROX removal from wastewater with high efficiency.

Sorption of organic contaminants by biochars with multiple porous structures: Experiments and molecular dynamics simulations mediated by three-dimensional models

Interactions between organic pollutants and carbon-based particles are critical for understanding and predicting the fate of organic contaminants in the environment. However, traditional modeling concepts did not consider three-dimensional (3-D) structures of carbon-based materials. This prevents a deep understanding of the sequestration of organic pollutants. Therefore, this study revealed interactions between organics and biochars by combining experimental measurements and molecular dynamics simulations. Biochars displayed the best and worst sorption performances for naphthalene (NAP) and benzoic acid (BA), respectively, among the five adsorbates. The kinetic model fitting suggested that biochar pores played a vital role during sorption and led to the fast and slow sorption of organics on the biochar surface and in pores, respectively. Active sites on the biochar surface predominantly sorbed organics. Organics were only sorbed in pores when the surface's active sites were fully occupied. These results can guide the development of efficient organic pollution control strategies to protect human health and improve ecological security.

Hierarchically porous graphene-like biochar for efficient removal of aromatic pollutants and their structure-performance relationship: A combined experimental, MD and DFT study

Development of high-efficiency adsorbents and exploration of the structure-performance relationship holds exciting implications for removal of aromatic pollutants (APs) from water. Herein, hierarchically porous graphene-like biochars (HGBs) were successfully prepared by K₂CO₃ simultaneous graphitization and activation of Physalis pubescens husk. The HGBs possess high specific surface area (1406-2369.7 m²/g), hierarchically meso-/microporous structure and high graphitization degree. The optimized HGB-2-9 sample exhibits rapid adsorption equilibrium time (t_e) and high adsorption capacities (Q_e) for seven widely-used persistent APs with different molecular structures (e.g., phenol: t_e = 7 min, Q_e = 191.06 mg/g; methylparaben: t_e = 12 min Q_e = 482.15 mg/g). HGB-2-9 also shows a wide pH (3-10) suitability and good ionic strength (0.01-0.5 M NaCl) resistance properties. The effects of the physicochemical properties of HGBs and APs on the adsorption performance were deeply investigated by the adsorption experiments, molecular dynamics (MD) and density functional theory (DFT) simulation. The results demonstrate that the large specific surface area, high graphitization degree and hierarchically porous structure of HGB-2-9 can supply more active sites on accessible surface and facilitate the transport of APs. And the aromaticity and hydrophobicity of APs play the more crucial roles during the adsorption process. Besides, the HGB-2-9 presents good recyclability and high removal efficiency for APs in various real water, which further confirms its potential for practical applications.

Functionalized biochars with highly-efficient malachite green adsorption property produced from banana peels via microwave-assisted pyrolysis

In this study, functionalized banana peel biochar (BPB) was prepared by microwave-assisted pyrolysis for the first time to investigate its adsorption to malachite green (MG) dye. Adsorption experiments showed that the maximum adsorption capacity of BPB500 and BPB900 to malachite green reached 1790.30 and 2297.83 mg·g^-1 within 120 min. The adsorption behaviour was well-fitted by the pseudo-second-order kinetic model and Langmuir isotherm model, and ΔG⁰ < 0, ΔH⁰ > 0, indicated that the adsorption process was endothermic and spontaneous, dominated by chemisorption. The adsorption mechanism of MG dye on BPB included hydrophobic interaction, hydrogen bonding, π-π interaction, n-π interaction, and ion exchange. Meanwhile, through regeneration tests, simulated wastewater treatment experiments, and cost calculations, it was found that BPB has great potential for practical applications. This work demonstrated that microwave-assisted pyrolysis is a viable low-cost approach for producing excellent sorbents from biomass, and banana peel is a promising feedstock to prepare biochar for dye removal.

Preparation of Biochar with Developed Mesoporous Structure from Poplar Leaf Activated by KHCO3 and Its Efficient Adsorption of Oxytetracycline Hydrochloride

The effective removal of oxytetracycline hydrochloride (OTC) from the water environment is of great importance. Adsorption as a simple, stable, and cost-effective technology is regarded as an important method for removing OTC. Herein, a low-cost biochar with a developed mesoporous structure was synthesized via pyrolysis of poplar leaf with potassium bicarbonate (KHCO₃) as the activator. KHCO₃ can endow biochar with abundant mesopores, but excessive KHCO₃ cannot continuously promote the formation of mesoporous structures. In comparison with all of the prepared biochars, PKC-4 (biochar with a poplar leaf to KHCO₃ mass ratio of 5:4) shows the highest adsorption performance for OTC as it has the largest surface area and richest mesoporous structure. The pseudo-second-order kinetic model and the Freundlich equilibrium model are more consistent with the experimental data, which implies that the adsorption process is multi-mechanism and multi-layered. In addition, the maximum adsorption capacities of biochar are slightly affected by pH changes, different metal ions, and different water matrices. Moreover, the biochar can be regenerated by pyrolysis, and its adsorption capacity only decreases by approximately 6% after four cycles. The adsorption of biochar for OTC is mainly controlled by pore filling, though electrostatic interactions, hydrogen bonding, and π-π interaction are also involved. This study realizes biomass waste recycling and highlights the potential of poplar leaf-based biochar for the adsorption of antibiotics.

NaHCO3 activated sludge-derived biochar by KMnO4 modification for Cd(II) removal from aqueous solutions

The surface flat pristine biochar provides limited adsorption sites for Cd(II) adsorption. To address this issue, a novel sludge-derived biochar (MNBC) was prepared by NaHCO₃ activation and KMnO₄ modification. The batch adsorption experiments illustrated that the maximum adsorption capacity of MNBC was twice that of pristine biochar and reached equilibrium more quickly. The pseudo-second order and Langmuir model were more suitable for analyzing the Cd(II) adsorption process on MNBC. Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^- and NO^-₃ had no effect on the Cd(II) removal. Cu²⁺ and Pb²⁺ inhibited the Cd(II) removal, while PO^3-₄ and humic acid (HA) promoted it. After 5 repeated experiments, the Cd(II) removal efficiency on MNBC was 90.24%. The Cd(II) removal efficiency of MNBC in different actual water bodies was over 98%. Furthermore, MNBC owned excellent Cd(II) adsorption performance in fixed bed experiments, and the effective treatment capacity was 450 BV. The co-precipitation, complexation, ion exchange and Cd(II)-π interaction were involved in Cd(II) removal mechanism. XPS analysis showed that NaHCO₃ activation and KMnO₄ modification enhanced the complexation ability of MNBC to Cd(II). The results suggested that MNBC can be used as an effective adsorbent for treating of Cd-contaminated wastewater.

Natural phenol-inspired porous polymers for efficient removal of tetracycline: Experimental and engineering analysis

Efficient and feasible removal of trace antibiotics from wastewater is extremely important due to its environmental persistence, bioaccumulation, and toxicity, but still remains a huge challenge. Herein, three natural phenol-inspired porous organic polymers were fabricated from natural phenolic-derived monomers (p-hydroxy benzaldehyde, 2,4-dihydroxy benzaldehyde and 2,4,6-trihydroxy benzaldehyde) and melamine via polycondensation reaction. Characterization highlighted that the increasing contents of hydroxyl groups in monomers induced an increase of the polymer total porosity and promoted the formation of a highly microporous structure. With mesopore-dominated pore (average pore diameter 9.6 nm) and large pore volume (1.78 cm³/g), p-hydroxy benzaldehyde-based porous polymer (1-HBPP) exhibited ultra-high maximum adsorption capacity (q_max) of 697.6 mg/g for tetracycline (TC) antibiotic. Meanwhile, the porous networks and plentiful active sites of 1-HBPP enabled fast adsorption kinetics (within 10 min) for TC removal, which could be well described by the pseudo-second-order model. Dynamic adsorption studies showed that 1-HBPP could be used in fixed-bed adsorption column (FBAC) with high removal efficiency (breakthrough volume per unit mass, 13.2 L/g) and dynamic adsorption capacity (201.6 mg/g), which were much higher than other reported adsorbents. The breakthrough curves both well matched with Thomas and Yoon-Nelson models in FBAC treatment. Moreover, removal mechanism analysis affirmed that pore-filling, hydrogen bonding, electrostatic interactions and π-π stacking interactions were main driving forces for TC adsorption. The prepared natural phenol-inspired porous adsorbents show great potential in antibiotics removal from wastewater, and this strategy would promote the sustainable and high-value utilization of natural phenolic compounds.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

Synergistic effect of hydrogen bonding and π-π interaction for enhanced adsorption of rhodamine B from water using corn straw biochar

Dyes adsorption to biochar via hydrogen bonding, and π-π interaction alone have attracted much research attention, however, their synergism in adsorption mechanisms remains largely unnoticed. The synergistic effects of the hydrogen bonding and π-π interaction might improve the adsorption capacity and need more understanding to prepare high-capacity biochar. In this work, we evaluated the adsorption of various dyes on biochar prepared via the activation of potassium bicarbonate and urea (named BC-KN) to explore their synergistic effects. Batch experiments indicated the BC-KN showed a high adsorption capacity to rhodamine B at 4839.0 mg/g, azure B at 4477.7 mg/g, and methylene blue at 2223.0 mg/g, respectively. The mechanism of such significant adsorption was investigated by their comparative experiments, characterizations, and computational analyses. The computational analyses suggested that the synergism of the hydrogen bonding and π-π interaction improves the adsorption energies of BC-KN/RhB system from -10.35 kcal/mol to -20.49 kcal/mol. It can be concluded that the hydrogen bonding and π-π interaction can synergize to significantly improve the adsorption by increasing the π-electron density and shortening the distance of aromatic rings, thus dyes with H-donor show significantly better adsorption capacities. The insight of hydrogen bonding being the governing factor in the synergistic system will help produce high-capacity biochar in removing aromatic dyes and suggest a sustainable technology for the efficient decolorization of dye effluent to minimize its damage to the health and environment.

Novel hydrophilic straw biochar for the adsorption of neonicotinoids: kinetics, thermodynamics, influencing factors, and reuse performance

Nitenpyram (NIT) is the most water-soluble neonicotinoid (NEO). It has been shown to pose a serious threat to human health and the environment but was always ignored due to its limited market share. There were few experts who studied NIT's transport behavior on biochar. In this study, two types of biochar were co-activated separately using zinc chloride combined with phosphoric acid and potassium hydroxide combined with acetic acid, marked as ZBC and KBC. Characterizations suggested that hydrophilic ZBC and KBC had more surface functional groups than unmodified biochar (BC), and specific surface areas of ZBC (456.406 m²·g^-1) and KBC (750.588 m²·g^-1) were significantly higher than of BC (67.181 m²·g^-1). The pore structures of KBC and ZBC were hierarchical porous structures with different pore sizes and typical microporous structure, respectively. The adsorption performance of either NIT or IMI on KBC was better than that on ZBC. Only 0.4 g·L^-1 of KBC can absorb 89.62% of NIT in just 5 min. The equilibrium adsorption amounts of NIT on ZBC and KBC were 17.995 mg·g^-1 and 82.910 mg·g^-1. Elovich and Langmuir models were used to evaluate the whole adsorption process, which was attributed to the chemisorption mechanism. In addition, removal rates of NIT were negatively correlated to NIT's initial concentration and positively correlated to the dose of biochar. pH had almost no effect on adsorption, but the presence of salt ions can inhibit the removal of NIT. Long-term stabilities of biochars were also acceptable. These findings will promote the development in the preparation of biochar fields and provide a positive reference value for NEO removal.

Adsorption behavior of hierarchical porous biochar from shrimp shell for tris(2-chloroethyl) phosphate (TCEP): Sorption experiments and DFT calculations

Tris(2-chloroethyl) phosphate (TCEP) as a new type of flame retardant exists in various water environments, causing great risks to humans and the environment. In this study, shrimp shell was used to prepare an economical and environmental-friendly adsorbent for the efficient removal of TCEP. The systematic studies including characterization, removal performance, and adsorption mechanism of shrimp shell biochar toward TCEP were carried out. Adsorption kinetics and thermodynamics showed that fast equilibrium reached within 30 min, the maximum adsorption capacity q_m was 108 μmol g^-1 at 298 K, and the adsorption process is spontaneous and exothermic. The environmental factor, such as temperature, pH, inorganic anions and organic matter hardly affected the adsorption performance. Structural characterization indicated that the hierarchical porous structure of shrimp shell biochar is the key to excellent adsorption performance. The adsorption mechanisms were further revealed using density functional theory (DFT) calculations, and the hydrogen bond, van der Waals interactions, Cl-H interactions, and pi-H interactions were identified as potential interaction mechanisms between TCEP and specific biochar structures. The calculated binding energy between TCEP and simplified biochar structure suggested that oxygen-containing groups especially carboxyl, hydroxyl and aldehyde facilitate the adsorption. Our work not only provides a novel strategy for the quick remediation of organophosphate-contaminated water environments but also offers new opportunities for crustacean waste biomass valorization.

One-pot preparation of magnetic nitrogen-doped porous carbon from lignin for efficient and selective adsorption of organic pollutants

Organic pollutants pose a serious threat to water environment, thus it is essential to develop high-performance adsorbent to remove them from wastewater. Herein, nitrogen-doped magnetic porous carbon (M-PLAC) with three-dimensional porous structure was synthesized from lignin to adsorb methylene blue (MB) and tetracycline (TC) in wastewater. The calculated equilibrium adsorption amount by M-PLAC for MB and TC was 645.52 and 1306.00 mg/g, respectively. The adsorption of MB and TC on M-PLAC conformed to the pseudo-second-order kinetic model. The removal of MB by M-PLAC showed fast and efficient characteristics and exhibited high selectivity for TC in a binary system. In addition, M-PLAC was suitable for a variety of complex water environments and had good regeneration performance, demonstrating potential advantages in practical wastewater treatment. The organic pollutant adsorption by M-PLAC was attributed to electrostatic interaction, hole filling effect, hydrogen bonding, and the π-π interaction.

Enhanced adsorption of phosphate from pickling wastewater by Fe-N co-pyrolysis biochar: Performance, mechanism and reusability

A one-step method of preparation using a novel nitrogen (N)-doped Fe-rich biochar (N₅-CB) resulted in a maximum adsorption capacity (314.52 mg/g) compared with Fe-rich biochar (CB, 104.044 mg/g). It can be used to adsorb phosphate (P) efficiently. Additionally, the adsorption kinetics, isotherms, and thermodynamics indicated that the adsorption of P onto N₅-CB was mainly mediated via multilayer coverage, endothermic, spontaneous, and physical mechanisms. The main adsorption mechanisms include Fe-P precipitation, FeOP bonding, and electronic effect. Further, the highly active Fe-N_x sites and graphitic N induced by N doping were the dominant driving force underlying enhanced P adsorption. Active Fe-N_x sites resulted in a positively-charged carbon structure and P absorption via electrostatic effect. Based on the simple method of pyrolysis, N₅-CB can be used in P removal from pickling wastewater with excellent adsorption capacity and remarkable recyclability.

Biochar for the Removal of Emerging Pollutants from Aquatic Systems: A Review

Water contaminated with emerging pollutants has become a serious environmental issue globally. Biochar is a porous and carbon-rich material produced from biomass pyrolysis and has the potential to be used as an integrated adsorptive material. Many studies have shown that biochar is capable to adsorb emerging pollutants from aquatic systems and could be used to solve the water pollution problem. Here, we provided a dual perspective on removing emerging pollutants from aquatic systems using biochar and analyzed the emerging pollutant removal efficiency from the aspects of biochar types, pollutant types and coexistence with heavy metals, as well as the associated mechanisms. The potential risks and future research directions of biochar utilization are also presented. This review aims to assist researchers interested in using biochar for emerging pollutants remediation in aquatic systems and facilitate research on emerging pollutants removal, thereby reducing their environmental risk.

Buchwald-Hartwig coupled conjugated microporous polymer for efficient removal COVID-19 antiviral drug famciclovir from waters: Adsorption behavior and mechanism

The consumption of famciclovir (FCV) has been increased dramatically since the outbreak of coronavirus in 2019, and the pollution and harm of FCV in waters are concerned. Here, by utilizing aryl halides on 2, 4, 6-tris(4-bromophenyl)- 1, 3, 5-triazine (BPT) and primary amine groups on benzidine (BZ), a novel conjugated microporous polymer, namely BPT-BZ-CMP, was synthesized by Buchwald-Hartwig coupling reaction and applied in the removal of FCV from aqueous solution firstly. The synthesized BPT-BZ-CMP were characterized by various methods, including FTIR, SEM, BET, and Zeta-potential. Due to the micropore structure and high specific surface area, it took only 30 min for BPT-BZ-CMP to adsorb FCV to reach an equilibrium, and the maximum adsorption capacity was 347.8 mg·g^-1. The Liu and pseudo-second-order kinetic models properly fit the adsorption equilibrium and kinetic data, respectively. The adsorption process was a spontaneous process, and the hydrogen bonding, π-π interaction and C-H···π interaction enhanced the adsorption of FCV on BPT-BZ-CMP. BPT-BZ-CMP maintained a good adsorption capacity after four consecutive adsorption-desorption cycle experiments. This study confirmed the potential of BPT-BZ-CMP as efficient sorbent to remove FCV from aqueous solutions.

Green, zero-waste pathway to fabricate supported nanocatalysts and anti-kinetoplastid agents from sugarcane bagasse

The conversion processes of sugarcane into direct-consumption sugar and juice are generating a tremendous amount of waste, the so-called sugarcane bagasse (SCB). Biochar preparation is among the practical solutions aiming to manage and valorize SCB into high added-value functional material (FM). Herein, we propose a novel zero-waste pathway to fabricate two FMs from one biomass. The SCB was first macerated and ultrasonicated to obtain the natural extract that served as bio-reducing medium. Then, the H₂O/EtOH-extracted SCB was in-situ impregnated with a bimetallic solution of copper and silver nitrates. The process produced an intermediate composite (FM₀), Ag/Cu-Ag⁺/Cu²⁺-loaded SCB which was carbonized to elaborate Ag/Cu-Biochar (FM₁), free Ag/Cu nanoparticles (FM₂) were obtained by microwaving the residual liquid waste. FM₁ exhibited high catalytic activity for the total Fenton-like degradation of methylene blue. The experimental data followed the pseudo-first and the pseudo-second order rate laws with apparent degradation rate constants K₁ 45 10^-3 min^-1 and K₂ 0.115 g.mg^-1.min^-1, respectively. FM₀, FM₁ and FM₂ were tested as new anti-kinetoplastid materials against two flagellated protozoans namely the Leishmania spp and the Trypanosoma cruzi. Notably, Ag/Cu (FM₂) showed exceptional leishmanicidal and trypanocidal effects with IC₅₀ values of 2.909 ± 0.051, 3.580 ± 0.016 and 3.020 ± 0.372 ppm for L.donovani, L. amazonensis and Trypanosoma cruzi, respectively. In this way, we combine green chemistry and agrowaste valorization in a full zero-waste process, to address the 3rd (indicator 3.3.5) and 6th (indicator 6.3.1) United Nations sustainable development goals, ″Good Health and Well-Being″ and ″Clean Water and Sanitation″.

Comparison of the performance of hydrochar, raw biomass, and pyrochar as precursors to prepare porous biochar for the efficient sorption of phthalate esters

In this study, three high-performance porous biochars were synthesized by the cocarbonization of Pistia stratiotes-derived precursors (raw biomass, hydrochar and pyrochar) with potassium hydroxide and utilized for the sorption of diethyl phthalate from aqueous solution. The developed pore structure, surface functional groups, high hydrophobicity characteristic and graphene structure of porous biochars contributed to the excellent sorption quantity of up to 813 mg g^-1 (C_e, 25 mg L^-1). Among the three precursors, hydrochar-derived porous biochar showed better properties in terms of its specific surface area and hydrophobicity, and it displayed the highest sorption capacity. The sorption kinetics and isotherm experiments confirmed that pore filling and partitioning dominated the sorption capacity while the mass transfer, hydrogen bonding and π-π stacking in the hydrochar limited the sorption rate. This finding helped to propose a feasible method for the efficient utilization of invasive aquatic plants and provided novel insight into the selection of precursors for preparing porous biochars.

Efficient adsorption of dyes from aqueous solution using a novel functionalized magnetic biochar: Synthesis, kinetics, isotherms, adsorption mechanism, and reusability

In this study, a novel adsorbent, dodecylbenzene sulfonic acid (DBSA) functionalized magnetic biochar (DBSA-Fe₃O₄@BC), was synthesized and used to efficiently remove dyes from aqueous solution. The results indicated that DBSA-Fe₃O₄@BC exhibited an excellent adsorption capacity for Rhodamine B (RhB), and the maximum adsorption capacity for RhB at 298 K was 367.67 mg/g, which was approximately 2.3-1.2 folds than that of BC, dodecylsulfonic acid functionalized biochar (DSA@BC), DBSA@BC, Fe₃O₄@BC, and DSA-Fe₃O₄@BC. The possible adsorption mechanisms for RhB adsorption by DBSA-Fe₃O₄@BC included pore filling, electrostatic attraction, H bond, and surface complexation. Importantly, structural control presented that the simultaneous introduction of alkyl and phenyl groups significantly enhanced RhB adsorption by DBSA-Fe₃O₄@BC through hydrophobic and π-π interaction. Combined ethanol (EtOH) desorption and H₂O₂ oxidation regeneration, DBSA-Fe₃O₄@BC remained high-performance for RhB adsorption after six cycles (97.44%), indicating its outstanding reusability. In summary, DBSA-Fe₃O₄@BC exhibited a prospective application for dyeing wastewater treatment.

Decipher the molecular descriptors and mechanisms controlling sulfonamide adsorption onto mesoporous carbon: Density functional theory calculation and partial least-squares path modeling

Mesoporous carbons (MCs) exhibit excellent removal efficiencies to various organic chemicals. However, how the properties of chemicals influence the adsorption mechanisms and further determine their adsorption onto MCs are poorly understood. We investigated the adsorption of 22 sulfonamides (SAs) onto four MCs, and further uncovered the major molecular descriptors and adsorption mechanisms influencing the adsorption by density functional theory (DFT) and partial least-squares path modeling (PLS-PM). The results revealed that the excess molar refraction (E), McGowan's molar volume (V), energy of the highest occupied molecular orbital (E_HOMO), hardness (H), and most positive net charge on carbon atom (Q_c⁺) were identified as the indirect factors affecting the distribution coefficient (logK_D), by influencing the BE(π-π), BE(H), and logK_ow. BE(π-π) and logK_ow displayed significant direct impacts on logK_D (p < 0.05), while BE(H) showed insignificant direct influences on logK_D (p > 0.05). The PLS-PM results indicate the main driving forces for SAs adsorption including π-π interactions, hydrophobic effects, and hydrogen bonding. This study provides a new perspective on revealing the adsorption mechanisms, and the identified factors can be used to develop the quantitative model to further predict the adsorption of SAs onto MCs.

Insights into highly effective catalytic persulfate activation on oxygen-functionalized mesoporous carbon for ciprofloxacin degradation

Nanocarbons have been demonstrated as promising carbon catalysts for substituting metal-based catalysts for the green treatment of wastewater. In this study, oxygen-functionalized mesoporous carbon (OCMK-3) was prepared by wet oxidation and exhibited high catalytic performance against ciprofloxacin (CIP) by activation of persulfate. The effects of environmental parameters (pH, temperature, coexisting ions) and process parameters (temperature, sodium persulfate concentration, catalyst agent dosage, initial concentration) on the removal of CIP were investigated. Compared with the pristine ordered mesoporous carbon (CMK-3), the removal efficiency of CIP by OCMK-3 was increased by 32% under optimal conditions. This rise in activity was attributed to the increase in oxygen-containing functional groups, porosity, and specific surface area of OCMK-3 with improved structural defects and electron transfer efficiency. Furthermore, based on active species scavenging experiments, a dual-pathway mechanism of the radical and nonradical pathways was discovered. The rational degradation pathway of CIP was investigated based on liquid chromatography-mass spectrometry (LC-MS). In addition, the OCMK-3/PS system exhibited high decomposition efficiency in pharmaceutical wastewater treatment. This study provides an in-depth mechanism for the degradation of organic pollutants by carbon-based PS-AOPs and provides theoretical support for further studies.

Sulfidised nanoscale zerovalent iron-modified pitaya peel-derived carbon for enrofloxacin degradation and swine wastewater treatment: Combination of electro-Fenton and bio-electro-Fenton process

In this study, a new Fenton system combining electro-Fenton and bio-electro-Fenton (EF-BEF) processes was proposed for ENR degradation and swine wastewater treatment, and pitaya peel-derived carbon modified with sulfidised nanoscale zerovalent iron (SnZVI) was developed as a catalyst for the system. The as-prepared PPC-800 carbon displayed a hierarchical porous structure (693.5 m²/g), abundant oxygen-containing groups, and carbon defects, which endowed it with a good adsorption capacity, high H₂O₂ generation capacity (151.9 ± 10.5 mg/L) during the EF period, and good power production performance (194.3 ± 12.50 mW/m²) during the BEF period. When modified with SnZVI, despite the decrease in the adsorption capacity and power output (102.05 ± 4.05 mW/m²), the SnZVI@PPC-2 exhibited the best ENR removal performance with that of 98.9 ± 0.2% in the EF period and 86.2 ± 5.6% during the BEF period. An increase in the current intensity and air flow rate promoted ENR degradation. Finally, swine wastewater was treated using the SnZVI@PPC-2 EF-BEF system, and 97.9 ± 1.3% of the TOC was removed using the combined system.

Removal of polystyrene nanoplastics from water by CuNi carbon material: The role of adsorption

Nanoplastics have attracted wide attention worldwide as a new potentially threatening pollutant, and they can cause harm to the organisms and pose threat to the water environment. Therefore, efficient removal techniques for nanoplastics are urgently needed. In this study, CuNi carbon material (CuNi@C) was prepared by hydrothermal method for the removal of polystyrene (PS) nanoplastics from water. CuNi@C was effectively adsorbed on PS nanoplastics. When the CuNi@C dosage increased from 0.1 g/L to 0.3 g/L, the removal efficiency of PS nanoplastics (10 mg/L) elevated from 32.72% to 99.18%. The images of the scanning electron microscope (SEM) and the Fourier transform infrared spectroscopy (FTIR) spectra of CuNi@C confirmed the adsorption of PS nanoplastics on the CuNi@C. The fitting results of adsorption kinetic models and isotherms equations demonstrated that physical adsorption and monolayer coverage were the predominant mechanisms of the PS nanoplastics adsorption on CuNi@C. Thermodynamics analysis illustrated the adsorption of PS nanoplastics on CuNi@C was a spontaneous and endothermic process. The electrostatic attraction occurred in adsorption progress, and the removal efficiency of PS nanoplastics in the acidic system was generally higher than that in the alkaline system. CuNi@C can be recycled via washing and drying treatment and these CuNi@C comparable PS nanoplastics removal performance to the original ones. After four times cycles, CuNi@C can still remove ~75% of total PS nanoplastics from water. This study reveals that CuNi@C can be used as promising techniques for the removal of PS nanoplastics from the aqueous environment.

Heterogeneous compositions of oxygen-containing functional groups on biochars and their different roles in rhodamine B degradation

The reactivity of pyrogenic carbon has attracted a great deal of research attentions recently. The oxygen-containing structures are rich on the surface of biochars, and involved in accepting and donating electrons during the interactions between biochar and organic contaminants. In this work, the species and content of oxygen-containing functional groups on biochar surface were regulated through chemical modification, and batch sorption/degradation experiments were carried out for rhodamine B (RhB). Based on the comparison of surface functional groups, biochars produced below 200 °C mediated RhB degradation through phenol hydroxyl group, while semiquinone and carboxylic acid groups were the main reaction active sites for biochars produced at higher than 500 °C. Considering that various biochar properties play roles in mediating organics degradation, the strategies in manipulating biochar properties should be carefully considered.

Simultaneous adsorption of tetracycline, ammonium and phosphate from wastewater by iron and nitrogen modified biochar: Kinetics, isotherm, thermodynamic and mechanism

The simultaneous removal of various pollutants in wastewater is increasingly deserved attention. In this study, an efficient adsorbent Fe/N@BC was synthesized by Fe-N co-modification. The adsorbability of Fe/N@BC was evaluated using a mixture with tetracycline (TC), NH₄⁺-N and PO₄^3-P. In comparison to BC, N@BC and Fe@BC, Fe/N@BC exhibited an excellent performance for simultaneously absorbing TC, NH₄⁺-N and PO₄^3-P. The pseudo-first-order was used to describe the adsorption process of NH₄⁺-N and PO₄^3-P, while the pseudo-second-order could be well fitted to TC adsorption data. The adsorption isotherms of TC, NH₄⁺-N and PO₄^3-P were more in line with Sips model (Adj.R² > 0.97). The maximum adsorption capacities of Fe/N@BC towards TC, NH₄⁺-N and PO₄^3-P were 238.94, 111.87 and 165.02 mg g^-1, respectively, which were 1.31-1.91 times than that of BC, N@BC and Fe@BC. The simultaneous adsorption mechanism mainly involved pore filling, electrostatic interaction, ion exchange, surface complexation, surface precipitation, H bond and π-π interaction. Furthermore, after six cycles, the removal efficiencies of TC, NH₄⁺-N and PO₄^3-P were 75.3, 66.1 and 64.5% by Fe/N@BC, highlighting its promising potential to adsorb multi-pollutants from aqueous solution.

Tailoring biochar for persulfate-based environmental catalysis: Impact of biomass feedstocks

Biochar, a carbonaceous material with engineering potential, has gained attention as an efficient catalyst in persulfate-based advanced oxidation processes (PS-AOPs). Although biomass feedstocks are known as a critical factor for the performance of biochar, the relationship between the catalytic efficiency/mechanism and the types of biomass feedstocks is still unclear. Thus, according to recent advances in experimental and theoretical researches, this paper provides a systematic review of the properties of biochar, and the relationship between catalytic performance in PS-AOPs and biomass feedstocks, where the differences in physicochemical properties (surface properties, pore structure, etc.) and activation path of different sourced biochars, are introduced. In addition, how the tailoring of biochar (such as heteroatomic doping and co-pyrolysis of biomass) affects its activation efficiency and mechanism in PS-AOPs is summarized. Finally, the suitable application scenarios or systems of different sourced biochars, appropriate methods to improve the catalytic performance of different types of biochar and the prospects and challenges for the development of biochar in PS-AOPs are proposed.

Rapid and efficient adsorption of tetracycline from aqueous solution in a wide pH range by using iron and aminoacetic acid sequentially modified hierarchical porous biochar

The object of this work was to synthesize an iron and aminoacetic acid sequentially modified hierarchical porous biochar (AC-Fe@HPBC) for tetracycline (TC) removal from aqueous solution. Results showed that AC-Fe@HPBC had a larger surface area (362.5370 m²/g), developed microporous structure (0.1802 cm³/g), and numerous functional groups, which provided more adsorption sites. The maximum adsorption capacity towards TC by AC-Fe@HPBC was 457.85 mg/g, 1.43, 1.29 and 1.20-fold than that of HPBC, AC@PHBC and Fe@HPBC, respectively, and the super-fast adsorptive equilibrium was achieved within 10 min. Additionally, introducing amino and carboxyl functional groups on the AC-Fe@HPBC surface significantly broadened the operation pH range (3-11). Site energy analysis indicated TC and AC-Fe@HPBC had stronger adsorption affinity at a higher temperature. The adsorption mechanism involved pore filling, surface complexation, H-bond and π-π interaction. Moreover, the reusability experiments proved AC-Fe@HPBC as an effective adsorbent for TC removal from aqueous solution.

A state-of-the-art review on producing engineered biochar from shellfish waste and its application in aquaculture wastewater treatment

Global production of shellfish aquaculture is steadily increasing owing to the growing market demands for shellfish. The intensification of shellfish aquaculture to maximize production rate has led to increased generation of aquaculture waste streams, particularly the effluents and shellfish wastes. If not effectively managed, these wastes could pose serious threats to human health and the ecosystem while compromising the overall sustainability of the industry. The present work comprehensively reviews the source, composition, and environmental implications of shellfish wastes and aquaculture wastewater. Moreover, recent advancements in the valorization of shellfish wastes into value-added biochar via emerging thermochemical and modification techniques are scrutinized. The utilization of the produced biochar in removing emerging pollutants from aquaculture wastewater is also discussed. It was revealed that shellfish waste-derived biochar exhibits relatively higher adsorption capacities (300-1500 mg/g) compared to lignocellulose biochar (<200 mg/g). The shellfish waste-derived biochar can be effectively employed for the removal of various contaminants such as antibiotics, heavy metals, and excessive nutrients from aquaculture wastewater. Finally, future research priorities and challenges faced to improve the sustainability of the shellfish aquaculture industry to effectively support global food security are elaborated. This review envisages that future studies should focus on the biorefinery concept to extract more useful compounds (e.g., carotenoid, chitin) from shellfish wastes for promoting environmental-friendly aquaculture.

Removal of chlortetracycline from water using spent tea leaves-based biochar as adsorption-enhanced persulfate activator

Antibiotic compounds have caused serious environmental concerns. In this study, we developed an effective technology for treatment of chlortetracycline (CTC), a widely used antibiotic compound. A natural heteroatom-doped spent tea leaves-based biochar (STLB) with excellent adsorption and catalytic property was prepared by simple thermal treatment. An adsorption-promoted persulfate-based advanced oxidation process (PS-AOP) using STLB was studied for CTC removal. The results showed that the as-prepared STLB presented favorable adsorption affinity towards CTC with the maximum adsorption capacity of 627 mg g^-1. Meanwhile, CTC enriched on the surface of STLB was good for in-situ decomposition of CTC and nearly 97.4 % of CTC was removed within 30 min of pre-adsorption and 60 min of subsequent degradation. The STLB had excellent recyclability and wide pH tolerance range of 3.0-9.0 in combined pre-adsorption and PS-AOP. Reactive oxygen species analysis confirmed that CTC degradation was mainly due to non-radical (singlet oxygen, ¹O₂) and radicals (SO₄^- and OH). This study suggests that STLB is a promising adsorption-enhanced PS activator for the treatment of refractory wastewater and also provides a strategy of waste control by spent tea leaves.

Facile synthesis of Fe-modified lignin-based biochar for ultra-fast adsorption of methylene blue: Selective adsorption and mechanism studies

A novel Fe-modified lignin-based biochar (Fe-LB) was fabricated via a facile one-step carbonization method for methylene blue (MB) removal from wastewater. Fe-LB exhibited a high specific surface area (885.97 m²/g) and micropore volume (0.3203 m³/g), and demonstrated high affinity for MB with the maximum adsorption capacity of 2.7-fold by Fe-LB than LB. It was found that quick adsorption could be achieved in 15 min with the MB removal efficiency of 100% and adsorption capacity reached 200 mg/g. Selective adsorption studies indicated that Fe-LB preferentially adsorbed MB in high salt and multiple dye systems (binary, ternary, and quaternary) over a wide pH range from 2 to 12. The removal efficiency of CR was greatly improved due to the synergistic effect between MB and CR in the binary system. This work demonstrated that Fe-LB can effectively remove dye contaminants and possessed great potential in the treatment of MB polluted dye wastewater.

Enhanced adsorption of rhodamine B from water by Fe-N co-modified biochar: Preparation, performance, mechanism and reusability

To adsorb rhodamine B (RhB) in wastewater by pristine biochar was limited, while the modified biochar has shown great potential adsorption performance. Here, coconut shell mixed with FeSO₄·7H₂O and urea was prepared to synthesize Fe-N co-modified biochar by once pyrolysis method at 500℃. The results showed Fe-N-BC had larger surface area (972.8714 m²·g^-1), higher developed porous structure (0.65016 cm³·g^-1), and more oxygen-containing groups, which collectively contributed to significantly improve the adsorption performance of the Fe-N-BC towards RhB. The maximum adsorption capacity of RhB reached 12.41 mg·g^-1 by Fe-N-BC which was 1.58, 1.43 and 1.26 folds than that of BC, N-BC and Fe-BC, respectively. The mechanism of adsorption for Fe-N-BC towards RhB including ion exchange, pore filling, surface complexation, H-bond and π-π interaction. This study indicates that Fe-N-BC is an excellent adsorbent for RhB removal from wastewater.

Simultaneous removal of fluoride, manganese and iron by manganese oxide supported activated alumina: characterization and optimization via response surface methodology

Fluoride, iron and manganese simultaneous exceedance of standard can be observed in groundwater in northeastern China. This work aims to apply a highly efficient method combining adsorption and oxidation for the synchronous removal of the inorganic ions. An innovative adsorbent (manganese-supported activated alumina) was synthesized by the impregnation method and showed a significant adsorption capacity better than that of fresh activated alumina. The characterization (scanning electron microscope; Brunauer, Emmett and Teller; X-ray diffraction and Fourier transform infrared spectroscopy) results verified the successful introduction of MnOOH and MnO₂, and the improvement of surface microstructure enhanced the removal ability. The effect of single factors, such as pH value, reaction time or dosage on the removal performance has been verified. The maximum removal efficiencies of fluoride, iron and manganese were optimized via Response surface methodology considering the independent factors in the range of MO@AA dosage (5-9 g/L), pH (4-6) and contact time (4-12 h). Noted that compared with control, MO@AA exhibited 59.4% of improved fluoride performance. At pH of 5.79, contacting time of 12 h and 8.21 g/L of MO@AA, fluoride, iron and manganese removal were found to be 91, 100 and 23%, respectively. Herein, MO@AA was distinguished as good applicability for the treatment of fluoride-, iron- and manganese-containing groundwater.

Sustainable biochar/MgFe2O4 adsorbent for levofloxacin removal: Adsorption performances and mechanisms

The limitation of low efficiency and complicated separation after adsorption make the practical application of biochar a huge challenge. Here, one pomelo peel-derived magnetic biochar composite, biochar supported MgFe₂O₄ (BMF) was fabricated and adopted for Levofloxacin (LFX) adsorption. Adsorption behaviors and mechanisms were investigated by characterization analysis, batch experiments, and data modeling. Results indicated that adsorption could be strikingly influenced by pyrolysis temperature. Adsorption kinetic was well fitted by pseudo-second-order model. Adsorption isotherm was best fitted with Freundlich model. The maximum adsorption capacity was 115 mg g^-1. Moreover, hydrophobic effect played a limited contribution according to dual-mode model analysis. LFX adsorption was spontaneous and endothermic. Adsorption mechanisms were ascribed to electrostatic interactions, H-bonding, functional groups complexation, and π-π electron donor-acceptor interactions. Besides that, BMF had the potential for repeated use. This research proposed a novel and promising method for LFX or other antibiotics adsorption removal.

Fast synthesis of high surface area bio-based porous carbons for organic pollutant removal

A fast, facile and one-pot chemical activation method was used to develop porous carbons with high surface area and excellent phenolic micropollutant adsorption performance from renewable precursors. This method was applied to three precursors: naturally abundant, but often underestimated wildfire-damaged boreal peats, corn starch, and cellulose. Porous carbon formation was accomplished through precursor impregnation with ZnCl₂ powder and their simultaneous pyrolysis under inert N₂ flow at 400 or 600 °C for 1 h. The maximum adsorption capacities of these bio-sorbents towards a model contaminant, p-nitrophenol, in simulated wastewater were equal to or superior than using a commercial activated carbon (CAC), Norit GSX (> 530 mg/g) over wide initial concentration ranges (20–2000 mg/L). p-nitrophenol adsorption best fitted Freundlich and Redlich-Peterson isotherms, suggesting multilayer chemisorption. Low concentration p-nitrophenol (20 mg/L) adsorption into the bio-sorbents was rapid in the first 4 h, and could reach high removals (> 98%). The method presented here yielded bio-sorbents with similarly high adsorption performance regardless of the precursor type, while avoiding energy-intensive processing steps during sorbent production. This study gives a useful alternative for manufacturing new sorbents from other upcycled carbonaceous and/or bio-based materials to remove micropollutants and heavy metals.•

Fast, single-step chemical activation for manufacturing bio-based porous carbons.

•

Efficient adsorption towards aqueous phenolic micropollutant from batch studies.

•

A competitive substitute of charcoal activated carbons for water purification.

Effectively removing indole-3-butyric acid from aqueous solution with magnetic layered double hydroxide-based adsorbents

The magnetic layered double hydroxide-based materials (MLDHs) with the metal composition of Mg(II)Al(III) were synthesized by different conditions as the adsorbent for removal of a phytohormone, indole-3-butyric acid (IBA). The morphological characteristics of MLDHs were studied through various characterization methods such as XRD, SEM, TEM, FTIR, BET, Zeta-potential and VSM. The adsorption results showed that the adsorption capacity of MLDH-1 synthesized by co-precipitation method with ammonia as the base source was the best (maximum 522.6 mg/g). The extent of adsorption in the pH range of 3.0-9.0 was observed to be no noticeable change. From the economical point of view, 1.0 g/L MLDH-1 composites were selected as optimum parameter. For a given adsorbent concentration (C_s), its kinetics and adsorption isotherm followed the pseudo-second-order and Liu isotherm model, respectively. The adsorbed sample can be easily magnetically separated and regenerated with NaNO₃. The adsorption process was spontaneous and exothermic, including two path stages: surface adsorption of lamellar and interlayer anion exchange. The research makes a contribution to evaluating the ability of MLDHs in IBA removal and helping the public to understand the mechanism of adsorption process.