Formation of disinfection by-products in a UV-activated mixed chlorine/chloramine system

Control of chlorination disinfection by-products in drinking water by combined nanofiltration process: A case study with trihalomethanes and haloacetic acids

Disinfection by-products (DBPs) are prevalent contaminants in drinking water and are primarily linked to issues regarding water quality. These contaminants have been associated with various adverse health effects. Among different treatment processes, nanofiltration (NF) has demonstrated superior performance in effectively reducing the levels of DBPs compared to conventional processes and ozone-biological activated carbon (O3-BAC) processes. In this experiment, we systematically investigated the performance of three advanced membrane filtration treatment schemes, namely "sand filter + nanofiltration" (SF + NF), "sand filter + ozone-biological activated carbon + nanofiltration" (SF + O3-BAC + NF), and "ultrafiltration + nanofiltration" (UF + NF), in terms of their ability to control disinfection by-product (DBP) formation in treated water, analyzed the source and fate of DBP precursors during chlorination, and elucidated the role of precursor molecular weight distribution during membrane filtration in relation to DBP formation potential (DBPFP). The results indicated that each treatment process reduced DBPFP, as measured by trihalomethane formation potential (THMFP) and haloacetic acid formation potential (HAAFP), with the SF + O3-BAC + NF process being the most effective (14.27 μg/L and 14.88 μg/L), followed by the SF + NF process (21.04 μg/L and 16.29 μg/L) and the UF + NF process (26.26 μg/L and 21.75 μg/L). Tyrosine, tryptophan, and soluble microbial products were identified as the major DBP precursors during chlorination, with their fluorescence intensity decreasing gradually as water treatment progressed. Additionally, while large molecular weight organics (60-100,000 KDa) played a minor role in DBPFP, small molecular weight organics (0.2-5 KDa) were highlighted as key contributors to DBPFP, and medium molecular weight organics (5-60 KDa) could adhere to the membrane surface and reduce DBPFP. Based on these findings, the combined NF process can be reasonably selected for controlling DBP formation, with potential long-term benefits for human health.

Bromide induced the formation of brominated halonitromethanes from aspartic acid in the UV/chlorine disinfection process

Brominated halonitromethanes (Br-HNMs) are generated in water disinfection processes and present high toxicity to human health. This work used aspartic acid (ASP) as the precursor to reveal that bromide (Br-) induced the production of Br-HNMs in the UV/chlorine disinfection process. Consequently, six Br-HNMs were identified, and their yields presented an increasing and then declining evolution over the reaction time from 0 to 15 min. Also, the total Br-HNMs yield reached the maximum of 251.1 μg L-1 at 5 min and then declined to 107.1 μg L-1. The total Br-HNMs yield increased from 2.40 to 251.14 μg L-1 with the increase of Cl2:Br- ratios from 0.25 to 3.0 by increasing free chlorine dosage with a fixed Br- concentration, and it increased from 207.59 to 251.14 μg L-1 and then decreased to 93.44 μg L-1 with the increase of Cl2:Br- ratio from 1.0 to 3.6 by increasing Br- concentration with a fixed free chlorine dosage. Besides, the total Br-HNMs yield reached the highest value (251.14 μg L-1) at pH 7.0 and the lowest value (74.20 μg L-1) at pH 8.0. Subsequently, the possible reaction mechanism of Br-HNMs generated from ASP was deduced, and the changes in toxicity of Br-HNMs also followed an increasing and then declining trend, closely relating to Br-HNMs yields and Br- utilization. This work explored and illustrated the yields, influence factors, reaction mechanisms, and toxicity of Br-HNMs formed from Br- containing ASP water during UV/chlorine disinfection, which might help to control Br-HNMs formation.

Chlorine-mediated electrochemical advanced oxidation process for ammonia removal: Mechanisms, characteristics and expectation

Chlorine-Mediated Electrochemical Advanced Oxidation (Cl-EAO) technology is a promising approach for ammonia removal from wastewater due to its numerous advantages, including small infrastructure, short processing time, easy operation, high security, and high nitrogen selectivity. This paper provides a review of the ammonia oxidation mechanisms, characteristics, and anticipated applications of Cl-EAO technology. The mechanisms of ammonia oxidation encompass breakpoint chlorination and chlorine radical oxidation, although the contributions of active chlorine, Cl, and ClO remain uncertain. This study critically examines the limitations of existing research and suggests that a combination of determining free radical concentration and simulating a kinetic model would help elucidate the contributions of active chlorine, Cl, and ClO to ammonia oxidation. Furthermore, this review comprehensively summarizes the characteristics of ammonia oxidation, including kinetic properties, influencing factors, products, and electrodes. The amalgamation of Cl-EAO technology with photocatalytic and concentration technologies has the potential to enhance ammonia oxidation efficiency. Future research should concentrate on clarifying the contributions of active chlorine, Cl, and ClO to ammonia oxidation, the production of chloramines and other byproducts, and the development of more efficient anodes for the Cl-EAO process. The main objective of this review is to enhance the understanding of the Cl-EAO process. The findings presented herein contribute to the advancement of Cl-EAO technology and provide a foundation for future studies in this field.

Formation, toxicity, and mechanisms of halonitromethanes from poly(diallyl dimethyl ammonium chloride) during UV/monochloramine disinfection in the absence and presence of bromide ion

Bromide ion (Br^-) is known as a prevalent component in water environments, which exhibits significant impacts on halonitromethanes (HNMs) formation. This study was performed to explore and compare the formation, toxicity, and mechanisms of HNMs from poly(diallyl dimethyl ammonium chloride) (PDDACl) in the absence and presence of Br^- in the UV/monochloramine (UV/NH₂Cl) disinfection process. The results showed that chlorinated HNMs were found in the absence of Br^-, while brominated (chlorinated) HNMs and brominated HNMs were found in the presence of Br^-. Furthermore, the peaks of total HNMs were promoted by 2.0 and 2.4 times, respectively when 1.0 and 2.0 mg L^-1 Br^- were added. Also, the peaks of total HNMs were enhanced with the increase of the NH₂Cl dosage, which were reduced with the increase of pH. It should be noted that Br^- induced higher toxicity of HNMs, and the cytotoxicity and genotoxicity of HNMs with the addition of 2.0 mg L^-1 Br^- were 78.0 and 3.7 times those without the addition of Br^-, respectively. Meanwhile, both the reaction mechanisms of HNMs produced from PDDACl were speculated in the absence and presence of Br^-. Finally, different HNMs species and yields were discovered in these two real water samples compared to those in simulated waters. These findings of this work will be conducive to understanding the significance of Br^- affecting HNMs formation and toxicity in the disinfection process.

Potential of Advanced Oxidation as Pretreatment for Microplastics Biodegradation

In the last two decades, microplastics (MP) have been identified as an emerging environmental pollutant. Due to their small size, MP particles may easily enter the food chain, where they can have adverse effects on organisms and the environment in general. The common methods for the removal of pollutants from the environment are not fully effective in the elimination of MP; thus, it is necessary to find a more suitable treatment method(s). Among the various approaches tested, biodegradation is by far the most environmentally friendly and economically acceptable remediation approach. However, it has serious drawbacks, generally related to the rather low removal rate and often insufficient efficiency. Therefore, it would be beneficial to use some of the less economical but more efficient methods as pretreatment prior to biodegradation. Such pretreatment would primarily serve to increase the roughness and hydrophilicity of the surface of MP, making it more susceptible to bioassimilation. This review focuses on advanced oxidation processes (AOPs) as treatment methods that can enhance the biodegradation of MP particles. It considers MP particles of the six most commonly used plastic polymers, namely: polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyethylene terephthalate and polyurethane. The review highlights organisms with a high potential for biodegradation of selected MP particles and presents the potential benefits that AOP pretreatment can provide for MP biodegradation.

Enhanced formation of iodinated trihalomethanes in a mixed chlorine/chloramine system and attenuation by UV-activated process

Iodinated trihalomethanes (I-THMs) have drawn increasing concerns due to their higher toxicity than those of their chlorinated and brominated analogues. In this study, I-THM formation was firstly evaluated for three treatment scenarios - (i) chlorine alone, (ii) chloramine alone, and (iii) mixed chlorine/chloramine - in the presence and absence of UV irradiation for the iodide-containing humic acid solution or natural water. The results indicated that I-THM formation decreased in the order of mixed chlorination/chloramination > chloramination > > chlorination, which fitted the trend of toxicity evaluation results using Chinese hamster ovary cells. Conversely, total organic halide concentration decreased in the order of chlorination > > chloramination ≈ mixed chlorination/chloramination. Besides, I-THM formation can be efficiently controlled in a UV-activated mixed chlorine/chloramine system. Influencing factors including pH values and Br^-/I^- molar ratios were also systematically investigated in a mixed chlorine/chloramine system. Enhanced I-THM formation was observed with increasing pH values (6.0-8.0) and Br^-/I^- molar ratios (1: 1-10: 1). The results obtained in this study can provide new insights into the increasing risk of I-THM formation in a mixed chlorine/chloramine system and the effective control of I-THMs in the iodide-containing water using UV irradiation.

Formation and transformation of halonitromethanes from dimethylamine in the presence of bromide during the UV/chlorine disinfection

Halonitromethanes (HNMs) is a typical class of nitrogenous disinfection byproducts with high toxicity. The effect of Br^- on the formation and transformation of HNMs from dimethylamine (DMA) during the ultraviolet (UV)/chlorine disinfection has been investigated in current study. Results reveal that only chloronitromethane, dichloronitromethane and trichloronitromethane (TCNM) could be found during the UV/chlorine disinfection. Whereas in the presence of Br^-, nine species of HNMs could be observed simultaneously. When Br^- concentration increased from 0 to 15.0 mg L^-1, the predominant species of HNMs were gradually changed from TCNM to dibromonitromethane and tribromonitromethane, which contributed to 23.37% and 31.07% of total HNMs concentration at 15 mg L^-1 Br^-, respectively. The presence of Br^- not only shifted the chlorinated-HNMs (Cl-HNMs) towards brominated-HNMs (Br-HNMs) but also affected the dominant species and total concentration of HNMs. When Br^- concentration was 4.0 mg L^-1, the formation of HNMs decreased with the increase of pH from 6.0 to 8.0 and increased with the increase of free chlorine and DMA. When free chlorine concentration rose from 0.25 to 1.1 mmol L^-1, Br-HNMs were shifted to Br(Cl)-HNMs and then to Cl-HNMs. According to the findings, possible formation and transformation pathways of HNMs from DMA were proposed in the presence of Br^- during the UV/chlorine disinfection. Finally, it was proved that the effect of Br^- on the trend of HNMs in real water was similar to that in deionized water, but higher HNMs concentrations and delayed peak time were observed in real water. This study can provide the scientific evidence and fundamental data for the applications of UV/chlorine disinfection in the treatment of water containing Br^-.

The Role of Catalytic Ozonation Processes on the Elimination of DBPs and Their Precursors in Drinking Water Treatment

Formation of disinfection byproducts (DBPs) in drinking water treatment (DWT) as a result of pathogen removal has always been an issue of special attention in the preparation of safe water. DBPs are formed by the action of oxidant-disinfectant chemicals, mainly chlorine derivatives (chlorine, hypochlorous acid, chloramines, etc.), that react with natural organic matter (NOM), mainly humic substances. DBPs are usually refractory to oxidation, mainly due to the presence of halogen compounds so that advanced oxidation processes (AOPs) are a recommended option to deal with their removal. In this work, the application of catalytic ozonation processes (with and without the simultaneous presence of radiation), moderately recent AOPs, for the removal of humic substances (NOM), also called DBPs precursors, and DBPs themselves is reviewed. First, a short history about the use of disinfectants in DWT, DBPs formation discovery and alternative oxidants used is presented. Then, sections are dedicated to conventional AOPs applied to remove DBPs and their precursors to finalize with the description of principal research achievements found in the literature about application of catalytic ozonation processes. In this sense, aspects such as operating conditions, reactors used, radiation sources applied in their case, kinetics and mechanisms are reviewed.