Efficient removal of volatile organic compound by ball-milled biochars from different preparing conditions

CaO assisted mechanochemical remediation of lindane-contaminated soil

In this study, the planetary ball milling with CaO addition was used to remediate lindane-contaminated soil. Based on Hertzian theory, a mathematical model was proposed to simulate the trajectory of grinding ball and the local energy transfer during a planetary operation at the disk rotation velocities of 150-250 rpm. Besides, the influence of different parameters on lindane removal in soil was investigated, whose results showed that disk rotation velocity and reagent-to-soil ratio had a positive effect, while soil moisture, initial concentration of lindane, and mass of polluted soil demonstrated a negative influence. The mechanochemical method exhibited a higher degradation performance at 3 wt% CaO addition, and a disk rotation velocity of 250 rpm. Active species generated by ball collisions in the presence of CaO, especially superoxide (·O2-) demonstrated a significant role in participating in the lindane conversion. In combination with GCMS and XPS analysis, the proposed model provides insight into mechanochemical remediation process from physical and chemical perspectives, which mainly includes four main steps: mixing, inducing, chemical reaction, and structure destruction.

Agri-food waste biosorbents for volatile organic compounds removal from air and industrial gases - A review

Approximately 1.3 billion metric tons of agricultural and food waste is produced annually, highlighting the need for appropriate processing and management strategies. This paper provides an exhaustive overview of the utilization of agri-food waste as a biosorbents for the elimination of volatile organic compounds (VOCs) from gaseous streams. The review paper underscores the critical role of waste management in the context of a circular economy, wherein waste is not viewed as a final product, but rather as a valuable resource for innovative processes. This perspective is consistent with the principles of resource efficiency and sustainability. Various types of waste have been described as effective biosorbents, and methods for biosorbents preparation have been discussed, including thermal treatment, surface activation, and doping with nitrogen, phosphorus, and sulfur atoms. This review further investigates the applications of these biosorbents in adsorbing VOCs from gaseous streams and elucidates the primary mechanisms governing the adsorption process. Additionally, this study sheds light on methods of biosorbents regeneration, which is a key aspect of practical applications. The paper concludes with a critical commentary and discussion of future perspectives in this field, emphasizing the need for more research and innovation in waste management to fully realize the potential of a circular economy. This review serves as a valuable resource for researchers and practitioners interested in the potential use of agri-food waste biosorbents for VOCs removal, marking a significant first step toward considering these aspects together.

Recent advancement of nano-biochar for the remediation of heavy metals and emerging contaminants: Mechanism, adsorption kinetic model, plant growth and development

Even though researches have shown that biochar can improve soil-health and plant-growth even in harsh environments and get rid of harmful heavy metals and new contaminants, it is still not sustainable, affordable, or effective enough. Therefore, scientists are required to develop nanomaterials in order to preserve numerous aquatic and terrestrial species. The carbonaceous chemical known as nano-biochar (N-BC) can be used to get rid of metal contamination and emerging contaminants. However, techniques to reduce hetero-aggregation and agglomeration of nano-biochar are needed that lead to the emergence of emerging nano-biochar (EN-BC) in order to maximise its capacity for adsorption of nano-biochar. To address concerns in regards to the expanding human population and sustain a healthy community, it is imperative to address the problems associated with toxic heavy metals, emerging contaminants, and other abiotic stressors that are threatening agricultural development. Nano-biochar can provide an effective solution for removal of emerging contaminants, toxic heavy metals, and non-degradable substance. This review provides the detailed functional mechanistic and kinetics of nano-biochar, its effectiveness in promoting plant growth, and soil health under abiotic stress. Nonetheless, this review paper has comprehensively illustrated various adsorption study models that will be employed in future research.

In situ synthesis of porous metal-organic frameworks NH2-UiO-66 on tea stem biochar and application in odours adsorption

Multiple odour nuisance in livestock farming is a notorious problem that has a significant impact on the living environment of surrounding communities. Adsorbents based on metal-organic framework (MOF) materials show great promise for controlling odour pollution, as they offer a high specific surface area, a controllable structure and an abundance of active sites. However, the MOF formation process is prone to problems such as pore clogging or collapse and reduced porosity, which limits its further application. In this study, a series of odour adsorbents were prepared by in situ growth of NH2-UiO-66 on tea stem biochar (TSBC) using a hydrothermal method and named UiO (Zr)-TSBCx. The physical and chemical properties and composition of UiO (Zr)-TSBCx have been systematically characterized using SEM, TEM, XRD, FT-IR, N2 adsorption-desorption and XPS. The release of odours from the pig farm effluent was monitored using in-situ continuous Proton-Transfer-Reaction Mass Spectrometry (PTR-MS), and the obtained primary compositions were tested for further adsorption. In dynamic adsorption experiments focused on butyric acid, UiO (Zr)-TSBC2 showed a high adsorption capacity of 3.99 × 105 μg/g and exceptional structural stability. UiO (Zr)-TSBC2 showed variable adsorption efficiencies for different odorous gases, with the best performance for the removal of ammonia, toluene and butyric acid. It also demonstrated the ability to rapidly mitigate instantaneous high concentrations of hydrogen sulfide (H2S), methanethiol and toluene resulting from agitation. Additionally, based on the relationship between the adsorption amount and the structural characteristics of the adsorbent as well as the nature of the odours, a possible adsorption mechanism of UiO (Zr)-TSBC2 for a variety of odours released from pig farm effluent was proposed. This work demonstrates a novel approach to promote deodorization applications in livestock and poultry farming environments by the in-situ growth of NH2-UiO-66 on biochar prepared from tea stem.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Microalgal biochar assisted simultaneous removal of particulate matter, formaldehyde, and total volatile organic compounds (TVOC's) from indoor air

Biochar-based materials for air treatment have gained significant attention for removing health-detrimental volatile organic compounds (VOCs) and particulate matter (PM) in indoor air settings. However, high turnaround time, multiple pretreatment processes involved, and high pore size and low surface area (>10 μm, <100 m2 g-1) of lignocellulosic feedstocks demand alternative biochar feedstock material. Considering this, we designed a simple first-of-its-kind indoor air scrubbing material using diatoms-enriched microalgae biochar. In the present study, the microalgae were cultivated on waste anaerobic digestate (biogas slurry) and were pyrolyzed at three different temperatures: 300 °C (BC300), 500 °C (BC500), and 700 °C (BC700). The BC500 and BC700 showed the highest removal efficiencies (99 %) for total volatile organic carbons (TVOCs) and formaldehyde (HCHO) at concentrations of 1.22 mg m-3 HCHO and 8.57 mg m-3 TVOC compared to 50% efficiency obtained with commercially available surgical, cloth, and N95 masks. The biochar obtained showed a high Brunauer-Emmett-Teller (BET) surface area of 238 m2 g-1 (BC500) and 480 m2 g-1 (BC700) and an average pore size of 9-11 nm due to the mesoporous characteristic of diatom frustules. The comparatively poor performance of BC300 was due to lower surface area (150 m2 g-1) arising from incomplete organic removal, as evidenced by FESEM-EDX and FTIR. The high removal efficiencies in BC500 and BC700 were also attributed to the presence of reactive functional groups such as -OH and R-NH2. Concurrently, the average particulate matter (PM10, PM2.5, and PM1) removal efficiency for BC500 and BC 700 ranged between 66 and 82.69 %. The PM removal performance of BC500 and BC700 was lower (15-20%) than commercially available masks. Overall, the present study highlights the importance of diatoms (reactive Si) present inside the pores of microalgal biochar for enhanced removal of PM, TVOCs, and HCHO at temperatures above 500 °C. This complete approach signifies a step towards establishing a self-sustainable and circular process characterized by minimal waste generation for indoor air treatment.

Applications and synergistic degradation mechanisms of nZVI-modified biochar for the remediation of organic polluted soil and water: A review

Increasing organic pollution in soil and water has garnered considerable attention in recent years. Nano zero-valent iron-modified biochar (nZVI/BC) has been proven to remediate the contaminated environment effectively due to its abundant active sites and unique reducing properties. This paper provides a comprehensive overview of the application of nZVI/BC in organic polluted environmental remediation and its mechanisms. Firstly, the review introduced primary synthetic methods of nZVI/BC, including in-situ synthesis (carbothermal reduction and green synthesis) and post-modification (liquid-phase reduction and ball milling). Secondly, the application effects of nZVI/BC were discussed in remediating soil and water polluted by antibiotics, pesticides, polycyclic aromatic hydrocarbons (PAHs), and dyes. Thirdly, this review explored the mechanisms of the adsorption and chemical degradation of nZVI/BC, and synergistic degradation mechanisms of nZVI/BC-AOPs and nZVI/BC-Microbial interactions. Fourth, the factors that influence the removal of organic pollutants using nZVI/BC were summarized, encompassing synthesis conditions (raw materials, pyrolysis temperature and aging of nZVI/BC) and external factors (reagent dosage, pH, and coexisting substances). Finally, this review proposed future challenges for the application of nZVI/BC in environmental remediation. This review offers valuable insights for advancing technology in the degradation of organic pollutants using nZVI/BC and promoting its on-site application.

Rational design of animal-derived biochar composite for peroxymonosulfate activation: Understanding the mechanism of singlet oxygen-mediated degradation of sulfamethoxazole

Animal-derived biochar are identified as a promising candidate for peroxymonosulfate (PMS) activation due to the abundant aromatics and oxygen-containing functional groups. The current investigation focuses on pig carcass-derived biochar (800-BA-PBC) by ball milling-assisted alkali activation. The results showed that 800-BA-PBC could effectively activate PMS and degraded 94.2% sulfamethoxazole (SMX, 10 mg/L) within 40 min. The reaction rate constant was found to be 47 times higher than that observed with PBC. The enhanced catalytic activity is mainly attributed to the increase in specific surface area, the increase content of oxygen-containing groups on the surface, and the formation of graphitic nitrogen. The quenching tests and electron paramagnetic resonance (EPR) analysis demonstrated that 1O2 is the main active species in the degradation of SMX. Moreover, the 800-BA-PBC + PMS system can maintain excellent degradation rate under different water quality, wide pH range, and the presence of different anions. The degradation pathways of SMX in the optimal system are also evaluated through intermediate identification and DFT calculation. These results indicate that the catalytic system has high anti-interference ability and practical application potential. This investigation provides new insight into the rational design of animal-derived biochar and develops a low-cost technology for the treatment of antibiotic containing wastewater.

Synthesis and characterization of nanobiochar from rice husk biochar for the removal of safranin and malachite green from water

Xenobiotic pollution in environment is a potential risk to marine life, and human health. Nanobiotechnology is an advanced and emerging solution for the removal of environmental pollutants. Adsorption-based technologies are being used to alleviate the global prevalence of xenobiotics like dyes, due to their high efficacy and cost effectiveness. Current study explored the potential of nanobiochar syntehsized via ultrasonication and centrifugation from rice husk for dye removal from water. It involves the synthesis of nanobiochar from rice husk biochar for removal of Safranin, Malachite green, and a mixture of both from aqueous water. Biochar was synthesized through pyrolysis at 600 °C for 2 h. To convert it into nanobiochar, sonication and centrifugation techniques were applied. The yield obtained was 27.5% for biochar and 0.9% for nanobiochar. Nanobiochar analysis through Fourier-Transform Spectrometer (FTIR), X-ray Power Diffraction (XRD) and scanning electron microscopy (SEM) suggested its crystalline nature having minerals rich in silicon, with a cracked and disintegrated carbon structure due to high temperature and processing treatments. Removal of dyes by nanobiochar was evaluated by changing different physical parameters i.e., nanobiochar dose, pH, and temperature. Pseudo-first order model and pseudo-second order model were applied to studying the adsorption kinetics mechanism. Kinetics for adsorption of dyes followed the pseudo-second order model suggesting the removal of dyes by process of chemical sorption. High adsorption was found at a higher concentration of nanobiochar, high temperature, and neutral pH. Maximum elimination percentages of safranin, malachite green, and a mixture of dyes were obtained as 91.7%, 87.5%, and 85% respectively. We conclude that nanobiochar could be a solution for dye removal from aqueous media.

On the adsorption characteristics and mechanism of methylene blue by ball mill modified biochar

In this study, modified biochar (BRB) was prepared from rice straw by ball milling technique and used for the adsorption of methylene blue (MB) in wastewater. The BRB was characterized by SEM, FTIR and XPS, and the adsorption model and Box-Behnken design were used to optimize the five influencing factors. The results showed that the ball milling technique could increase the content of functional groups (-OH, C=C and C-O, etc.) and aromatic structures on the surface of biochar, thus facilitating the removal of MB. The isotherm model was consistent with the Langmuir adsorption model (R2 = 0.947) and the maximum adsorption capacity was 50.27 mg/g. The adsorption kinetics was consistent with the pseudo-second-order kinetic model (R2 = 1) and the adsorption rate was mainly controlled by chemisorption. The thermodynamic model confirmed that the adsorption process was a spontaneous heat absorption reaction. The maximum adsorption efficiency was 99.78% under the optimal conditions (40℃, pH 8, reaction time = 90 min, dosing amount = 0.1 mg), and the adsorption efficiency could be improved by increasing the pH and BRB dosing amount. The surface functional groups and crystal structure properties of BRB were the main determinants of adsorption, and it was clarified that physical adsorption, electrostatic attraction and π-π interaction were the main mechanisms for the adsorption of MB by BRB. The main mechanisms were clarified. Therefore, BRB is an economic, efficient and green adsorption material with good potential for the removal of dye pollutants in the aqueous environment.

Ferrous disulfide and iron nitride sites on hydrochar to enhance synergistic adsorption and reduction of hexavalent chromium

In this study, a novel hydrochar containing ferrous disulfide (FeS2) and iron nitride (FeN) was prepared via a one-pot hydrothermal method to enhance the synergistic adsorption and reduction of hexavalent chromium (Cr(VI)). This material (Fe3-SNHC) exhibited a Cr(VI) removal capacity of 431.3 mg·g-1 and high tolerance to coexisting anions at pH 2. Adsorption occurred via monolayer chemisorption. Variation in material structure and density functional theory calculations proved that multiple active sites formed by interactions between heteroatoms improved the chemical inertness of hydrochar. FeN and FeS2 with two electron-donating groups had strong reducing ability to facilitate the conversion of Cr(VI) to trivalent chromium. It was concluded that next to electrostatic adsorption and complexation, synergistic reduction among multiple active sites were the dominant mechanisms involved in the removal Cr(VI). This study shows that Fe3-SNHC is a promising and environment-friendly material for Cr(VI) to remove it from wastewater.

Adsorption characteristics and mechanism of ammonia nitrogen and phosphate from biogas slurry by Ca2+-modified soybean straw biochar

The utilization of biogas slurry is critical for the sustainable development of animal husbandry. Biomass carbon adsorption is a feasible method for the recycling of nutrients from biogas slurry. However, research on the co-adsorption of ammonia nitrogen and phosphate is scarce. Herein, soybean straw was utilized as the raw material to prepare Ca2+-modified biochar (CaSSB), which was investigated for its ammonia nitrogen and phosphate adsorption mechanisms. Compared with natural biochar (SSB), CaSSB possesses a high H/C ratio, larger surface area, high porosity and various functional groups. Ca2+-modified soybean straw biochar exhibited excellent adsorption performance for NH4+-N (103.18 mg/g) and PO43--P (9.75 mg/g) at pH = 6, using an adsorbent dosage of 2 g/L. The experimental adsorption data of ammonia nitrogen by CaSSB corresponded to pseudo-second-order kinetics and the Langmuir isotherm model, suggesting that the adsorption process was homogeneous and that electrostatic attraction might be the primary adsorption mechanism. Meanwhile, the adsorption of phosphate conformed to pseudo-second-order kinetics and the Langmuir-Freundlich model, whose mechanism might be attributed to ligand exchange and chemical precipitation. These results reveal the potential of CaSSBs as a cost-effective, efficient adsorbent for the recovery of ammonium and phosphate from biogas slurry.

Nano-biochar: recent progress, challenges, and opportunities for sustainable environmental remediation

Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size reduction to nano-meters level. Nano-biochar presents remarkable physico-chemical behavior in comparison to macro-biochar including; higher stability, unique nanostructure, higher catalytic ability, larger specific surface area, higher porosity, improved surface functionality, and surface active sites. Nano-biochar efficiently regulates the transport and absorption of vital micro-and macro-nutrients, in addition to toxic contaminants (heavy metals, pesticides, antibiotics). However an extensive understanding of the recent nano-biochar studies is essential for large scale implementations, including development, physico-chemical properties and targeted use. Nano-biochar toxicity on different organisms and its in-direct effect on humans is an important issue of concern and needs to be extensively evaluated for large scale applications. This review provides a detailed insight on nanobiochar research for (1) development methodologies, (2) compositions and properties, (3) characterization methods, (4) potentiality as emerging sorbent, photocatalyst, enzyme carrier for environmental application, and (5) environmental concerns.

Investigation on removal of multi-component volatile organic compounds in a two-stage plasma catalytic oxidation system - Comparison of X (X=Cu, Fe, Ce and La) doped Mn2O3 catalysts

Mn₂O₃-X catalysts (X = Cu, Fe, Ce and La) were prepared based on γ-Al₂O₃ for the mixture degradation of muti-component volatile organic compounds (VOCs) composed of toluene, acetone, and ethyl acetate. The catalysts were characterized, and the density functional theory (DFT) simulation of ozone adsorption on Mn₂O₃-X were carried out to investigate the influence of adsorption energy on catalytic performance. The results showed that the removal efficiency (RE) of each VOC component was similarly improved by Mn₂O₃-X catalysts, and the greatest increase in VOCs' removal efficiency was obtained (7.8% for toluene, 86.2% for acetone, and 82.5% for ethyl acetate) at a special input energy (SIE) of 700 J L^-1 with Mn₂O₃-La catalyst. Characterization results demonstrated that Mn₂O₃-La catalyst had the highest content of low valence Mn elements and the greatest O_ads/O_latt ratio, as well as the lowest reduction temperature. Mn₂O₃-La catalyst also presented superior catalytic effect in improving carbon balance (CB) and CO₂ selectivity ( [Formula: see text] ). The CB and [Formula: see text] were increased by 47.7% and 12.61% respectively with Mn₂O₃-La at a SIE of 400 J L^-1 compared with that when only γ-Al₂O₃ was applied. The DFT simulation results of ozone adsorption on Mn₂O₃-X catalysts indicated that the adsorption energy of catalyst crystal was related to the catalytic performance of the catalyst. The Mn₂O₃-La/γ-Al₂O₃ catalyst, which had the highest absolute value of adsorption energy, presented the best performance in improving VOCs' RE.

Electrons of d-orbital (Mn) and p-orbital (N) enhance the photocatalytic degradation of antibiotics by biochar while maintaining biocompatibility: A combined chemical and biological analysis

Photocatalytic oxidation technology holds promise for ideal advanced treatment of antibiotic wastewater. Single-atom catalysts (SACs) are a new hotspot in catalytic science, but the photochemical studies on the removal of antibiotics from water and biocompatibility after entering the environment are scarce. In this work, we prepared a single Mn atom immobilized on N-doped biochar (Mn@N-Biochar) by impregnation calcination method for enhancing photocatalytic degradation of sulfanilamide (SNM) in different types of various water systems. Compared with the original biochar, Mn@N-Biochar showed enhanced SNM degradation and TOC removal capacity. DFT calculation concluded that the electrons of d-orbital (Mn) and p-orbital (N) altered the electronic structure of biochar and enhanced the photoelectric performance. It was shown that Mn@N-Biochar caused negligible systemic inflammation and tissue damage when given orally in mice, and also did not alter cell death and ROS production in human lung, kidney, and liver cells, as compared with biochar. We are convinced that Mn@N-Biochar could enhance the photocatalytic degradation of antibiotics while maintaining biocompatibility, which could be a promising strategy for wastewater treatment.

Remarkable synergy between sawdust biochar and attapulgite/diatomite after co-ball milling to adsorb methylene blue

Biochar has been recognized as a promising sustainable adsorbent for removing pollutants from wastewater. In this study, two natural minerals, attapulgite (ATP) and diatomite (DE) were co-ball milled with sawdust biochar (pyrolyzed at 600 °C for 2 h) at ratios of 10-40% (w/w) and examined the ability of methylene blue (MB) to be removed from aqueous solutions by them. All the mineral-biochar composites sorbed more MB than both ball milled biochar (MBC) and ball milled mineral alone, indicating there was a positive synergy in co-ball milling biochar with these minerals. The 10% (w/w) composites of ATP:BC (MABC10%) and DE:BC (MDBC10%) had the greatest MB maximum adsorption capacities (modeled by Langmuir isotherm modeling) and were 2.7 and 2.3 times that of MBC, respectively. The adsorption capacities of MABC10% and MDBA10% were 183.0 mg g^-1 and 155.0 mg g^-1 at adsorption equilibrium, respectively. These improvements can be owing to the greater content of oxygen-containing functional groups and higher cation exchange capacity of the MABC10% and MDBC10% composites. In addition, the characterization results also reveal that pore filling, π-π stacking interactions, hydrogen bonding of hydrophilic functional groups, and electrostatic adsorption of oxygen-containing functional groups also contribute prominently to the adsorption of MB. This, along with the greater MB adsorption at higher pH and ionic strengths, suggests the roles in MB adsorption was an electrostatic interaction and an ion exchange mechanism. These results demonstrate that mineral-biochar composites prepared by co-ball milling treatment were promising sorbents of ionic contaminants for environmental applications.

Remediation of polybrominated diphenyl ethers contaminated soil in the e-waste disposal site by ball milling modified zero valent iron activated persulfate

Hydrophobic organic compounds (HOCs) in e-waste disposal sites are difficult to remove effectively. There is little reported about zero valent iron (ZVI) coupled with persulfate (PS) to achieve the removal of decabromodiphenyl ether (BDE209) from soil. In this work, we have prepared the flake submicron zero valent iron by ball milling with boric acid (B-mZVI^bm) at a low cost. Sacrifice experiments results showed that 56.6% of BDE209 was removed in 72 h with PS/B-mZVI^bm, which was 2.12 times than that of micron zero valent iron (mZVI). The morphology, crystal form, atomic valence, composition, and functional group of B-mZVI^bm were determined by SEM, XRD, XPS, and FTIR, and the results indicated that the oxide layer on the surface of mZVI is replaced by borides. The results of EPR indicated that hydroxyl radical and sulfate radical played the dominant role in the degradation of BDE209. The degradation products of BDE209 were determined by gas chromatography-mass spectrometry (GC-MS), accordingly, the possible degradation pathway was further proposed. The research suggested that ball milling with mZVI and boric acid is a low-cost means of preparing highly active zero valent iron materials. And the mZVI^bm has promising applications in improving the activation efficiency of PS and enhancing the removal of the contaminant.

Effects of ball milling on biochar adsorption of contaminants in water: A meta-analysis

Reckless release of contaminants into the environment causes pollution in various aquatic systems on a global scale. Biochar is potentially an inexpensive and environmentally friendly adsorbent for removing contaminants from water. Ball milling has been used to enhance biochar's functionality; however, global analysis of the effect of ball milling on biochar's capacity to adsorb contaminants in aqueous solutions has not yet been done. Here, we conducted a meta-analysis to investigate the effects of ball milling on the adsorption/removal capacity of biochar for contaminants in aqueous solutions, and to investigate whether ball milling effects are related to biochar production, ball milling, and other experimental variables. Overall, ball milling significantly increased biochar adsorption capacity towards both inorganic and organic contaminants, by 69.9% and 561.9%, respectively. This could be attributed to ball milling increasing biochar surface area by 2.05-fold, pore volume by 2.39-fold, and decreasing biochar pH by 0.83-fold. The positive adsorption effects induced by ball milling varied widely, with the most effective being ball milling for 12 to 24 h at 300 to 400 rpm with a biochar:ball mass ratio of 1:100 on biochars produced at 400-550 °C from wood residues. Based on this meta-analysis, we conclude that ball milling could effectively enhance biochar's ability to remove organic and inorganic contaminants from aquatic systems.

H2O2 activated moxa ash via ball milling for ultrafast removal of mitoxantrone

As emerging contaminants, antineoplastic drugs are widely used, but their residues in water may cause long-term genotoxicity to aquatic organisms and human beings. Here, waste moxa ash was selected as biomass raw material and modified by ball milling to obtain carbon-based materials with excellent adsorption performance, which were used to remove the antineoplastic drug mitoxantrone (MTX) from water. The experimental results indicate that moxa ash modified by ball milling in hydrogen peroxide exhibits ultrafast removal of MTX (the removal efficiency reaches 97.66% in 1 min and 99.72% in 30 min). The pseudo-second-order kinetics and Freundlich isotherm models accurately describe the MTX adsorption process, and the mechanism of adsorption probably involves pore filling, hydrogen bond, π-π interaction and electrostatic attraction. Not only that, moxa ash also has the ability to remove dyes such as malachite green (97.81%) and methylene blue (99.97%). In this study, a simple and environmentally friendly process was used to convert waste moxa ash into an effective MTX adsorbent, providing a feasible solution for controlling MTX pollution and identifying a circular and economic way to reuse the waste.

Ball milling-assisted preparation of sludge biochar as a novel periodate activator for nonradical degradation of sulfamethoxazole: Insight into the mechanism of enhanced electron transfer

The non-radical pathway of periodate (PI) activation for the removal of persistent organic contaminants has received increasing attention due to its higher stability and oxidative advantages. In this study, the degradation of sulfamethoxazole (SMX) by ball mill treated magnetic sludge biochar (BM-MSBC) through activation of PI by electron transfer mechanism was reported. Experimental and characterization results showed that the ball milling treatment resulted in a better pore and defect structure, which also significantly enhanced the electron transfer capacity of the sludge biochar. The BM-MSBC/PI system exhibited notable dependence of activator concentration and initial pH, while the effect of PI concentration was not significant. The coexisting substances (common anions and natural organic matters) hardly affect the degradation of SMX in the BM-MSBC/PI system. The phytotoxicity experiments suggested that the treatment of BM-MSBC/PI system could significantly reduce the biological toxicity of SMX solution. This study provides a novel, economical, and facile modification method for the application of sludge biochar in advanced oxidation processes.

Enhanced removal of aged and differently functionalized polystyrene nanoplastics using ball-milled magnetic pinewood biochars

In this study, simple and environmentally friendly magnetic biochars were successfully prepared by ball-milling biochar with Fe₃O₄ nanoparticles to remove NPs from water. The magnetic biochars synthesized at various pyrolysis temperatures of 300 °C (MBC300), 500 °C (MBC500), and 700 °C (MBC700) were used to eliminate the unmodified (PS), aged under UV radiation (UVPS), amine-modified (PS-NH₂) and carboxylate-modified (PS-COOH) polystyrene NPs of 100 nm in size. Results showed that the removal efficiency of MBC300, MBC500, and MBC700 for PS were 43.67, 82.73 and 57.02%, which were 3.01, 5.76, and 3.10 times greater than that of corresponding pristine biochars at the same temperatures, respectively, and the strongest removal efficiency of MBC500 was 95.2% since it has the largest specific surface area and abundant oxygen-containing functional groups. The surface properties of the NPs affected their removal, and the PS-NH₂ had the highest removal rate using magnetic biochars. Compared to pristine biochars, the magnetic biochars displayed faster adsorption kinetics. The Langmuir maximum adsorption capacity of magnetic biochars for NPs were 107.7181-229.5772 mg/g, much greater than those of the pristine biochars (55.4602-80.3096 mg/g). Mechanism analysis revealed that the hydrophobicity, electrostatic attraction, H-bonding formation and π-π conjunction between the NPs and MBCs contributed to the adsorption process. This work highlights the promising potential of ball milling to be used as a simple technique for the preparation of magnetic biochar to remove NPs, especially NPs with various surface groups.

Performance of lignin impregnated biochar on tetracycline hydrochloride adsorption: Governing factors and mechanisms

Corn stalk-based and wheat straw-based biochar were modified by lignin impregnation and applied to adsorb tetracycline hydrochloride (TCH) in wastewater. Porous properties of lignin impregnated biochar were improved and showed better adsorption performance for TCH. Lignin impregnated wheat straw biochar (WS-L) had the maximum adsorption capacity of 31.48 mg/g, which was 1.89 times compared to corresponding pristine biochar, because excellent pore structure developed via the lignin impregnation and carbonization. The adsorption behavior of TCH molecules on biochar could be interpreted well by two-step process, and it postulated to be a physical adsorption process based on pore filling, hydrogen bonding, π-π interaction, and electrostatic interactions. And cations including Na⁺, K⁺, Mg²⁺ and Al³⁺ could compete with TCH for adsorption, while Ca²⁺ could promote TCH adsorption by forming tetracycline-Ca²⁺ complexes. Maximum TCH adsorption occurred at pH of 7. The best performing lignin impregnated biochar was WS-L that demonstrated the biochar modulated by lignin had the potential to remove antibiotics from aqueous solutions.

Adsorption characteristics and mechanisms of Cd2+ from aqueous solution by biochar derived from corn stover

Corn stover could be pyrolysed to prepare biochar for removing pollutants in water and realizing the resource utilization of biomass. The aims of the present study were to investigate the optimal preparation and adsorption conditions of biochar and to reveal the adsorption characteristics and mechanisms of Cd²⁺ in water by biochar. For this purpose, with Cd²⁺ as the target pollutant, the pyrolysis conditions involved in the pyrolysis temperature, retention time, and heating rate were evaluated and optimized. Additionally, the characteristics, mechanisms and optimal adsorption conditions of Cd²⁺ by biochar were determined. A series of characterization techniques was employed, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and specific surface area analysis (S_BET). The optimum pyrolysis parameters were a pyrolysis temperature of 700 °C, a retention time of 2.5 h, and a heating rate of 5 °C/min. Acid/base modification did not improve the adsorption capacity of biochar. The Langmuir and the Elovich model were the most suitable isotherm and kinetic models for equilibrium data, respectively. The maximum adsorption capacity fitted by Langmuir model was 13.4 mg/g. Furthermore, mineral precipitation and π electron interactions were shown to be the main adsorption mechanisms of Cd²⁺. The optimum adsorption conditions for Cd²⁺ in water were a CaCl₂ electrolyte solution of 0.01 mol/L, a pH level of 6.7, and a biochar dosage of 0.4 g. Our results indicated that corn stover biochar was an appropriate approach for improving the status of water with Cd²⁺ contamination in the short term and for promoting a new perspective for the rational utilization of corn stover and the low-cost pollution control of heavy metals in water.

Microwave-assisted pyrolysis derived biochar for volatile organic compounds treatment: Characteristics and adsorption performance

Biochar derived from corn stalk doping with activated carbon was produced by microwave-assisted pyrolysis and applied to sorb volatile organic compounds (VOCs: benzene and o-xylene). Specific surface area (SSA), total pore volume (TPV) and micropore volume (MV) of microwave biochar increased with increasing microwave power with the maximum values 325.2 m²·g^-1, 0.181 mL·g^-1 and 0.1420 mL·g^-1, respectively. Adsorption capacities of benzene and o-xylene on microwave biochar ranged 6.82-54.75 mg·g^-1 and 7.43-48.73 mg·g^-1, which were separate positively related with SSA, TPV, and MV. Benzene adsorption was mainly dominated by surface interaction and partition mechanisms, while o-xylene adsorption was governed by pore filling. The adsorption capacities of microwave biochar for benzene and o-xylene decreased by only 0.30% and 0.99% on the 5th cycle that illustrated the reasonably good reusability of microwave biochar. The results of this research demonstrate that microwave biochar is a promising adsorbent for VOCs removal.

Microwave biochars produced with activated carbon catalyst: Characterization and sorption of volatile organic compounds (VOCs)

A series of microwave biochars derived from wheat straw in the presence of a granulated activated carbon (GAC) catalyst, using a range of microwave conditions, were produced, characterized and tested as sorbents of three benzene series volatile organic compounds (VOCs). The microwave biochar with the greatest specific surface area (SSA), total pore volume (TPV), and micropore volume (312.62 m² g^-1, 0.2218 cm³ g^-1, and 0.1380 cm³ g^-1, respectively), were produced with 1:3 biomass:GAC catalyst mass ratio, 10 min microwave irradiation time, and at 500 W power level (WB500). Maximum adsorption capacities of WB500 to benzene, toluene and o-xylene were 53.9 mg g^-1, 75.8 mg g^-1 and 63.0 mg g^-1, respectively, and were directly correlated to microwave biochar properties such as SSA, TPV or micropore volume, but were also influenced by VOC properties such as molecular polarity and boiling point. Kinetic modeling suggested that adsorption was governed by both physical partitioning and chemisorption mechanisms. In addition, microwave biochars maintained 79% to 92% of their initial adsorption capacity after ten adsorption/desorption cycles. These results suggest that microwave biochars produced with an GAC catalyst have excellent potential for efficient use in the removal of VOCs from waste gas.

Removal of fluconazole from aqueous solution by magnetic biochar treated by ball milling: adsorption performance and mechanism

The problem of low adsorption capacity of pristine magnetic biochar for organic pollutants always occurs. It is of great significance to select a suitable method to improve the adsorption performance of magnetic biochar. In this study, magnetic biochar was treated by ball milling and tested for its fluconazole adsorption capacity. The maximum adsorption capacity of ball-milled magnetic biochar (BMBC) for fluconazole reached nearly 15.90 mg/g, which was approximately five times higher than that of pristine magnetic biochar (MBC). Fluconazole adsorption by BMBC was mainly attributed to π-π interactions, hydrogen bonding, and surface complexation with oxygen-containing functional groups. The enhancement in fluconazole adsorption by BMBC was attributed to an increase in oxygen-containing functional groups. Batch adsorption experiments also illustrated that BMBC could be successfully applied in a wide range of pH values. The high efficiency of fluconazole removal confirmed that ball milling was an effective strategy to enhance the adsorptive performance of magnetic biochar.

Adsorptive removal of some Cl-VOC's as dangerous environmental pollutants using feather-like γ-Al2O3 derived from aluminium waste with life cycle analysis

Herein, we designed a cost-effective preparation method of nanocomposite γ-Al₂O₃ derived from Al-waste. The produced material has a feather-like morphology, and its adsorption of some chlorinated volatile organic compounds (Cl-VOC's) such as benzyl chloride, chloroform and carbon tetrachloride (C₇H₇Cl, CHCl₃ and CCl₄) was investigated due to their potential carcinogenic effect on humans. It showed a characteristic efficiency towards the adsorptive removal of these compounds over a long period, i.e., eight continuous weeks, at ambient temperature and atmospheric pressure. After 8-weeks, the adsorbed amounts of these compounds were determined as: 325.3 mg C₇H₇Cl, 247.6 mg CHCl₃ and 253.3 mg CCl₄ per g of γ-Al₂O_3, respectively. CCl₄ was also found to be dissociatively adsorbed on the surface of γ-Al₂O₃, whereas CHCl₃ and C₇H₇Cl were found to be associatively adsorbed. The prepared γ-Al₂O₃ has a relatively high surface area (i.e., 192.2 m². g^-1) and mesoporosity with different pore diameters in the range of 25-47 Å. Furthermore, environmental impacts of the nanocomposite γ-Al₂O₃ preparation were evaluated using life cycle assessment. For prepartion of adsorbent utilising 1 kg of scrap aluminium wire, it was observed that potential energy demand was 288 MJ, climate change potential was 19 kg CO₂ equivalent, acidification potential was 0.115 kg SO₂ equivalent and eutrophication potential was 0.018 kg PO₄^3- equivalent.

Ball-milled biochar can act as a preferable biocompatibility material to enhance phenanthrene degradation by stimulating bacterial metabolism

The aim of this study was to evaluate the impact of different concentrations of ball-milled biochar pyrolyzed at 300-700 °C on the lethality, growth, metabolism, and degradability of gram-negative petroleum-degrading bacteria. BM-biochar was not toxic to Acinetobacter venetianus, only slowing the growth rate and extending the logarithmic phase. The ability of A. venetianus to produce extracellular polymeric substances (EPS) and biosurfactants was positive with ROS level. The highest degradation efficiency of phenanthrene (PHE) was 2.84-fold that of the control. Mechanism analysis revealed that increased EPS stimulated the adsorption of PHE and biosurfactant enhanced PHE solubility. The improved PHE biodegradability of A. venetianus through phthalic acid pathway is mainly owing to the intensify of PHE bioavailability and accessibility. These findings provide new insights into effects of BM-biochar on cellular responses and indicate that BM-biochar can act as a biocompatible material to enhance the degradation of organic pollutants.

Recent advances of carbon-based nano zero valent iron for heavy metals remediation in soil and water: A critical review

Heavy metal pollution in soil and water has presented a new challenge for the environmental remediation technology. Nano zero valent iron (nZVI) has excellent adsorbent properties for heavy metals, and thus, exhibits great potential in environmental remediation. Used as supporting materials for nZVI, carbon-based materials, such as activated carbon (AC), biochar (BC), carbon nanotubes (CNTs), and graphene (GNs) with aromatic rings formed by carbon atoms as the skeleton, have a large specific surface area and porous structure. This paper provides a comprehensive review on the advancement of carbon-based nano zero valent iron (C-nZVI) particles for heavy metal remediation in soil and water. First, different types of carbon-based materials and their combination with nZVI, as well as the synthesis methods and common characterization techniques of C-nZVI, are reviewed. Second, the mechanisms for the interactions between contaminants and C-nZVI, including adsorption, reduction, and oxidation reactions are detailed. Third, the environmental factors affecting the remediation efficiency, such as pH, coexisting constituents, oxygen, contact time, and temperature, are highlighted. Finally, perspectives on the challenges for utilization of C-nZVI in the actual contaminated soil and water and on the long-term efficacy and safety evaluation of C-nZVI have been proposed for further development.

Biochar as environmental armour and its diverse role towards protecting soil, water and air

Biochar has been of considerable importance for various environmental applications in recent years. It has exhibited substantial advantages like favourable structural and surface properties, easy process of preparation and widely available feedstocks. These set of exceptional properties make it an efficient, cost-effective and environment friendly source for diversified elimination of pollutants. The heterogeneity of physico-chemical properties offers a possibility for biochar to optimize its efficacy for targeted applications. This review aims to highlight the critical role that biochar plays in various environmental applications, be it in soil, water or air. In particular the article offers a comprehensive review of the recent research findings and updates related to the diversified role of biochar. Also, the interaction of pollutants with biochar functional groups and the impact of variation of parameters on biochar attribute relevant to specific pollutant removal, modifications, mechanisms involved and competence for such removal has been discussed. Different technologies for production of biochar have also been summarized with an emphasis on post treatment of biochar, such as modification and doping. In addition to this, the underlying gaps in the studies carried out so far and recommendations for future research areas in biochar have also been deliberated.

Evaluation of Thermochemical Characteristics and Pyrolysis of Fish Processing Waste for Renewable Energy Feedstock

The necessity of energy is continuously increasing, whereas fossil fuel sources are gradually depleting. To mitigate this problem, fish processing waste of the bluespotted stingray (Neotrygon kuhlii), available in the Borneo region, was investigated for an alternative feedstock of bioenergy production. The fish wastes are hazardous for the environment, whereas the biodiesel from fish waste is pollution-free and produces less contaminant gas and carbon dioxide than fossil fuel. From the proximate analysis, the moisture content, volatile matter, fixed carbon, and ash content of the fish waste were achieved as 4.88%, 63.80%, 15.03%, and 16.29%, respectively. The proportion of carbon, hydrogen, nitrogen, sulfur, and oxygen was found as 42.06%, 5.99%, 10.77%, 0.91%, and 40.27%, respectively, from the ultimate analysis. The calorific value was 21.53 MJ/kg, which would be highly effective in biofuel production. The morphology analysis results of the biomass are favorable for renewable energy sources. The major bondage between carbon and hydrogen and oxygen was found using Fourier transform infrared spectroscopy. The thermogravimetric analysis and derivative thermogravimetry revealed that the highest weight loss occurred at 352 °C temperature with a decomposition rate of 4.57 wt.%/min in pyrolysis circumstances, and at 606 °C temperature with a decomposition rate of 3.77 wt.%/min in combustion conditions. In the pyrolysis process for 25 °C/min heating rate, the yield of biochar, bio-oil, and bio-syngas was found as 33.96, 29.34, 23.46% at 400 °C, 47.72, 49.32, 33.87% at 500 °C, and 18.32, 21.34, 42.37% at 600 °C, respectively. The characteristics and pyrolysis yields of fish waste are suitable for being an effective renewable energy source.

Development of food-origin biochars for the adsorption of selected volatile organic compounds (VOCs) for environmental matrices

Four novel fruit-derived biochars were developed: pomegranate peels (PB), prickly pear peels (PPB), carob (CB), and locust bean gum (LBGB). The feedstocks were pyrolyzed at 350 and 550 ℃ (under N₂), respectively, and characterized using Scanning Electron Microscopy (SEM), Elemental Analysis (EA), Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Brunauer-Emmett-Teller (B.E.T) analysis, and Thermogravimetric analysis (TGA). A systematic and comprehensive comparison for the adsorption of selected volatile organic compounds (VOCs) by biochar was established. Cresol, dimethyl trisulfide (DMTS), hexane, and benzene were examined as a function of contact time (30-480 min), mass (0.1-1 g), concentration levels (50-1000 ppb_v), efficiency, and reusability, using the headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) method. PB 550 ℃ revealed a specific surface area of 8.3 m² g^-1, the fastest complete removal, an ideal mass of 1 g, 3-times reuse, and ∼ 99% removal of 500 ppb_v benzene, cresol, DMTS, and 100 ppb_v hexane.

Effect of dissolved biochar on the transfer of antibiotic resistance genes between bacteria

The spread of antibiotic resistance genes (ARGs) is a global environmental issue. Dissolved biochar is more likely to contact bacteria in water, producing ecological risks. This study explored the effects of dissolved biochar on ARGs transfer in bacteria. Conjugative transfer efficiency was significantly different following treatment with different types of dissolved biochar. Typically, humic acid-like substance in dissolved biochar can significantly improve the transfer efficiency of ARGs between bacteria. When the concentration of dissolved biochar was ≤10 mg biochar/mL, humic acid-like substance substantially promoted ARGs transfer. An increase in dissolved biochar concentration weakened the ARGs transfer from humic acid-like substance. The inhibitory effects of small-molecule matters dominated, decreasing conjugative transfer frequency. At a concentration of 100 mg biochar/mL, the conjugative transfer efficiency of all treatments was lower than that of control. Compared with corn straw dissolved biochar, there were more transconjugants in pine sawdust dissolved biochar. Following treatment with 10 mg biochar/mL pine sawdust dissolved biochar, the number of transconjugants was at its maximum; approximately 7.3 folds higher than the control. We also explored mechanisms by which dissolved biochar impacts conjugative transfer. Due to the complex composition of dissolved biochar, its effects on the expression of conjugative transfer-related genes were also dynamic. This study investigates the ecological risk of biochar and guides its scientific application.

Lignin-based adsorbent-catalyst with high capacity and stability for polychlorinated aromatics removal

The utilization of lignin as carbonaceous material for pollution adsorption provides an alternative way for lignocellulose valorization. Here in, lignin-based adsorbents (i.e., LC-A, LC-B, and LC-C) were prepared and used for the removal of o-DCB (a toxic gaseous pollutant). LC-B exhibited the best adsorption capacity (718.2 mg/g) when comparing with LC-A (93.1 mg/g), LC-C (10.2 mg/g), and activated carbon (72.7 mg/g). LC-B also demonstrated excellent recycling stability with the adsorption capacity of 710.8 mg/g after five runs. More importantly, LC-B supported Ru adsorbent catalyst could effectively remove o-DCB with removal rate >80% under a wide range of temperature (50-300°C). The excellent performance of lignin-based adsorbents could be attributed to its abundant pore structure, high specific surface area (1618.55 m²/g), enhanced graphitization degree as well as the abundant hydroxyl functional groups. The present work provided a cost-effective strategy for pollution control by lignin-based material.

Recent Progress in Metal-Organic Framework-Derived Nanostructures in the Removal of Volatile Organic Compounds

Air is the most crucial and life-supporting input from nature to the living beings of the planet. The composition and quality of air significantly affects human health, either directly or indirectly. The presence of some industrially released gases, small particles of anthropogenic origin, and the deviation from the normal composition of air from the natural condition causes air pollution. Volatile organic compounds (VOCs) are common contaminants found as indoor as well as outdoor pollutants. Such pollutants represent acute or chronic health hazards to the human physiological system. In the environment, such polluted gases may cause chemical or photochemical smog, leading to detrimental effects such as acid rain, global warming, and environmental pollution through different routes. Ultimately, this will propagate into the food web and affect the ecosystem. In this context, the efficient removal of volatile organic compounds (VOCs) from the environment remains a major threat globally, yet satisfactory strategies and auxiliary materials are far from being in place. Metal–organic frameworks (MOFs) are known as an advanced class of porous coordination polymers, a smart material constructed from the covalently bonded and highly ordered arrangements of metal nodes and polyfunctional organic linkers with an organic–inorganic hybrid nature, high porosities and surface areas, abundant metal/organic species, large pore volumes, and elegant tunability of structures and compositions, making them ideal candidates for the removal of unwanted VOCs from air. This review summarizes the fundamentals of MOFs and VOCs with recent research progress on MOF-derived nanostructures/porous materials and their composites for the efficient removal of VOCs in the air, the remaining challenges, and some prospective for future efforts.